[Pkg-libvirt-maintainers] Bug#993352: .socket and .service units fail to start during boot
Michael Biebl
biebl at debian.org
Tue Aug 31 10:16:00 BST 2021
Package: libvirt-daemon-system
Version: 7.6.0-1
Severity: important
Hi,
on an up-to-date Debian sid system, I get the following situation after
a boot:
$ systemctl --failed
UNIT LOAD ACTIVE SUB DESCRIPTION
● libvirtd.service loaded failed failed Virtualization daemon
● libvirtd-admin.socket loaded failed failed Libvirt admin socket
● libvirtd-ro.socket loaded failed failed Libvirt local read-only socket
● libvirtd-tcp.socket loaded failed failed Libvirt non-TLS IP socket
● libvirtd-tls.socket loaded failed failed Libvirt TLS IP socket
● libvirtd.socket loaded failed failed Libvirt local socket
LOAD = Reflects whether the unit definition was properly loaded.
ACTIVE = The high-level unit activation state, i.e. generalization of SUB.
SUB = The low-level unit activation state, values depend on unit type.
6 loaded units listed.
$ systemctl status libvirtd.socket libvirtd-admin.socket libvirtd-ro.socket libvirtd-tcp.socket libvirtd-tls.socket libvirtd.socket
● libvirtd.socket - Libvirt local socket
Loaded: loaded (/usr/lib/systemd/system/libvirtd.socket; enabled; vendor preset: enabled)
Active: failed (Result: service-start-limit-hit) since Tue 2021-08-31 09:37:52 CEST; 1h 32min ago
Triggers: ● libvirtd.service
Listen: /run/libvirt/libvirt-sock (Stream)
Aug 31 09:37:50 pluto systemd[1]: Listening on Libvirt local socket.
Aug 31 09:37:52 pluto systemd[1]: libvirtd.socket: Failed with result 'service-start-limit-hit'.
● libvirtd-admin.socket - Libvirt admin socket
Loaded: loaded (/usr/lib/systemd/system/libvirtd-admin.socket; enabled; vendor preset: enabled)
Active: failed (Result: service-start-limit-hit) since Tue 2021-08-31 09:37:52 CEST; 1h 32min ago
Triggers: ● libvirtd.service
Listen: /run/libvirt/libvirt-admin-sock (Stream)
Aug 31 09:37:50 pluto systemd[1]: Listening on Libvirt admin socket.
Aug 31 09:37:52 pluto systemd[1]: libvirtd-admin.socket: Failed with result 'service-start-limit-hit'.
● libvirtd-ro.socket - Libvirt local read-only socket
Loaded: loaded (/usr/lib/systemd/system/libvirtd-ro.socket; enabled; vendor preset: enabled)
Active: failed (Result: service-start-limit-hit) since Tue 2021-08-31 09:37:52 CEST; 1h 32min ago
Triggers: ● libvirtd.service
Listen: /run/libvirt/libvirt-sock-ro (Stream)
Aug 31 09:37:50 pluto systemd[1]: Listening on Libvirt local read-only socket.
Aug 31 09:37:52 pluto systemd[1]: libvirtd-ro.socket: Failed with result 'service-start-limit-hit'.
● libvirtd-tcp.socket - Libvirt non-TLS IP socket
Loaded: loaded (/usr/lib/systemd/system/libvirtd-tcp.socket; enabled; vendor preset: enabled)
Active: failed (Result: service-start-limit-hit) since Tue 2021-08-31 09:37:52 CEST; 1h 32min ago
Triggers: ● libvirtd.service
Listen: [::]:16509 (Stream)
CPU: 664us
Aug 31 09:37:50 pluto systemd[1]: Listening on Libvirt non-TLS IP socket.
Aug 31 09:37:52 pluto systemd[1]: libvirtd-tcp.socket: Failed with result 'service-start-limit-hit'.
● libvirtd-tls.socket - Libvirt TLS IP socket
Loaded: loaded (/usr/lib/systemd/system/libvirtd-tls.socket; enabled; vendor preset: enabled)
Active: failed (Result: service-start-limit-hit) since Tue 2021-08-31 09:37:52 CEST; 1h 32min ago
Triggers: ● libvirtd.service
Listen: [::]:16514 (Stream)
CPU: 802us
Aug 31 09:37:50 pluto systemd[1]: Listening on Libvirt TLS IP socket.
Aug 31 09:37:52 pluto systemd[1]: libvirtd-tls.socket: Failed with result 'service-start-limit-hit'.
● libvirtd.socket - Libvirt local socket
Loaded: loaded (/usr/lib/systemd/system/libvirtd.socket; enabled; vendor preset: enabled)
Active: failed (Result: service-start-limit-hit) since Tue 2021-08-31 09:37:52 CEST; 1h 32min ago
Triggers: ● libvirtd.service
Listen: /run/libvirt/libvirt-sock (Stream)
Aug 31 09:37:50 pluto systemd[1]: Listening on Libvirt local socket.
Aug 31 09:37:52 pluto systemd[1]: libvirtd.socket: Failed with result 'service-start-limit-hit'.
$ journalctl -b | grep libvirt
Aug 31 09:37:49 pluto audit[504]: AVC apparmor="STATUS" operation="profile_load" profile="unconfined" name="libvirtd" pid=504 comm="apparmor_parser"
Aug 31 09:37:49 pluto audit[504]: AVC apparmor="STATUS" operation="profile_load" profile="unconfined" name="libvirtd//qemu_bridge_helper" pid=504 comm="apparmor_parser"
Aug 31 09:37:49 pluto kernel: audit: type=1400 audit(1630395469.715:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libvirtd" pid=504 comm="apparmor_parser"
Aug 31 09:37:50 pluto libvirtd[678]: libvirt version: 7.6.0, package: 1 (Andrea Bolognani <eof at kiyuko.org> Thu, 19 Aug 2021 21:16:21 +0200)
Aug 31 09:37:50 pluto libvirtd[678]: hostname: pluto
Aug 31 09:37:50 pluto libvirtd[678]: Kann CA certificate '/etc/pki/CA/cacert.pem' nicht lesen: Datei oder Verzeichnis nicht gefunden
Aug 31 09:37:50 pluto systemd[1]: libvirtd.service: Main process exited, code=exited, status=6/NOTCONFIGURED
Aug 31 09:37:50 pluto systemd[1]: libvirtd.service: Failed with result 'exit-code'.
Aug 31 09:37:50 pluto systemd[1]: Starting Suspend/Resume Running libvirt Guests...
Aug 31 09:37:50 pluto systemd[1]: Finished Suspend/Resume Running libvirt Guests.
Aug 31 09:37:50 pluto systemd[1]: libvirtd.service: Scheduled restart job, restart counter is at 1.
Aug 31 09:37:51 pluto libvirtd[838]: libvirt version: 7.6.0, package: 1 (Andrea Bolognani <eof at kiyuko.org> Thu, 19 Aug 2021 21:16:21 +0200)
Aug 31 09:37:51 pluto libvirtd[838]: hostname: pluto
Aug 31 09:37:51 pluto libvirtd[838]: Kann CA certificate '/etc/pki/CA/cacert.pem' nicht lesen: Datei oder Verzeichnis nicht gefunden
Aug 31 09:37:51 pluto systemd[1]: libvirtd.service: Main process exited, code=exited, status=6/NOTCONFIGURED
Aug 31 09:37:51 pluto systemd[1]: libvirtd.service: Failed with result 'exit-code'.
Aug 31 09:37:51 pluto systemd[1]: libvirtd.service: Scheduled restart job, restart counter is at 2.
Aug 31 09:37:51 pluto libvirtd[1068]: libvirt version: 7.6.0, package: 1 (Andrea Bolognani <eof at kiyuko.org> Thu, 19 Aug 2021 21:16:21 +0200)
Aug 31 09:37:51 pluto libvirtd[1068]: hostname: pluto
Aug 31 09:37:51 pluto libvirtd[1068]: Kann CA certificate '/etc/pki/CA/cacert.pem' nicht lesen: Datei oder Verzeichnis nicht gefunden
Aug 31 09:37:51 pluto systemd[1]: libvirtd.service: Main process exited, code=exited, status=6/NOTCONFIGURED
Aug 31 09:37:51 pluto systemd[1]: libvirtd.service: Failed with result 'exit-code'.
Aug 31 09:37:52 pluto systemd[1]: libvirtd.service: Scheduled restart job, restart counter is at 3.
Aug 31 09:37:52 pluto libvirtd[1136]: libvirt version: 7.6.0, package: 1 (Andrea Bolognani <eof at kiyuko.org> Thu, 19 Aug 2021 21:16:21 +0200)
Aug 31 09:37:52 pluto libvirtd[1136]: hostname: pluto
Aug 31 09:37:52 pluto libvirtd[1136]: Kann CA certificate '/etc/pki/CA/cacert.pem' nicht lesen: Datei oder Verzeichnis nicht gefunden
Aug 31 09:37:52 pluto systemd[1]: libvirtd.service: Main process exited, code=exited, status=6/NOTCONFIGURED
Aug 31 09:37:52 pluto systemd[1]: libvirtd.service: Failed with result 'exit-code'.
Aug 31 09:37:52 pluto systemd[1]: libvirtd.service: Scheduled restart job, restart counter is at 4.
Aug 31 09:37:52 pluto libvirtd[1183]: libvirt version: 7.6.0, package: 1 (Andrea Bolognani <eof at kiyuko.org> Thu, 19 Aug 2021 21:16:21 +0200)
Aug 31 09:37:52 pluto libvirtd[1183]: hostname: pluto
Aug 31 09:37:52 pluto libvirtd[1183]: Kann CA certificate '/etc/pki/CA/cacert.pem' nicht lesen: Datei oder Verzeichnis nicht gefunden
Aug 31 09:37:52 pluto systemd[1]: libvirtd.service: Main process exited, code=exited, status=6/NOTCONFIGURED
Aug 31 09:37:52 pluto systemd[1]: libvirtd.service: Failed with result 'exit-code'.
Aug 31 09:37:52 pluto systemd[1]: libvirtd.service: Scheduled restart job, restart counter is at 5.
Aug 31 09:37:52 pluto systemd[1]: libvirtd.service: Start request repeated too quickly.
Aug 31 09:37:52 pluto systemd[1]: libvirtd.service: Failed with result 'exit-code'.
Aug 31 09:37:52 pluto systemd[1]: libvirtd-tls.socket: Failed with result 'service-start-limit-hit'.
Aug 31 09:37:52 pluto systemd[1]: libvirtd-tcp.socket: Failed with result 'service-start-limit-hit'.
Aug 31 09:37:52 pluto systemd[1]: libvirtd-ro.socket: Failed with result 'service-start-limit-hit'.
Aug 31 09:37:52 pluto systemd[1]: libvirtd-admin.socket: Failed with result 'service-start-limit-hit'.
Aug 31 09:37:52 pluto systemd[1]: libvirtd.socket: Failed with result 'service-start-limit-hit'.
-- System Information:
Debian Release: bookworm/sid
APT prefers unstable
APT policy: (500, 'unstable'), (200, 'experimental')
Architecture: amd64 (x86_64)
Foreign Architectures: i386
Kernel: Linux 5.10.0-8-amd64 (SMP w/4 CPU threads)
Kernel taint flags: TAINT_FIRMWARE_WORKAROUND, TAINT_OOT_MODULE, TAINT_UNSIGNED_MODULE
Locale: LANG=de_DE.UTF-8, LC_CTYPE=de_DE.UTF-8 (charmap=UTF-8), LANGUAGE not set
Shell: /bin/sh linked to /bin/dash
Init: systemd (via /run/systemd/system)
LSM: AppArmor: enabled
Versions of packages libvirt-daemon-system depends on:
ii adduser 3.118
ii debconf [debconf-2.0] 1.5.77
ii firewalld 1.0.1-2
ii gettext-base 0.21-4
ii iptables 1.8.7-1
ii libvirt-clients 7.6.0-1
ii libvirt-daemon 7.6.0-1
ii libvirt-daemon-config-network 7.6.0-1
ii libvirt-daemon-config-nwfilter 7.6.0-1
ii libvirt-daemon-system-systemd 7.6.0-1
ii logrotate 3.18.1-2
ii policykit-1 0.105-31
Versions of packages libvirt-daemon-system recommends:
ii dmidecode 3.3-3
ii dnsmasq-base [dnsmasq-base] 2.85-1
ii iproute2 5.13.0-2
ii mdevctl 0.81-1
ii parted 3.4-1
Versions of packages libvirt-daemon-system suggests:
ii apparmor 2.13.6-10
pn auditd <none>
pn nfs-common <none>
pn open-iscsi <none>
pn pm-utils <none>
pn radvd <none>
ii systemd 247.9-1
pn systemtap <none>
pn zfsutils <none>
-- Configuration Files:
/etc/libvirt/qemu.conf [Errno 13] Keine Berechtigung: '/etc/libvirt/qemu.conf'
-- debconf information excluded
More information about the Pkg-libvirt-maintainers
mailing list