[Pkg-net-snmp-commits] r295 - branches/net-snmp54/debian branches/net-snmp54/debian/patches branches/net-snmp54-dev/debian branches/net-snmp54-dev/debian/patches trunk/debian trunk/debian/patches
Jochen Friedrich
jochen at alioth.debian.org
Fri Nov 6 18:11:10 UTC 2009
Author: jochen
Date: 2009-11-06 18:11:10 +0000 (Fri, 06 Nov 2009)
New Revision: 295
Added:
branches/net-snmp54-dev/debian/libsnmp-base.config
branches/net-snmp54-dev/debian/libsnmp-base.postinst
branches/net-snmp54-dev/debian/libsnmp-base.templates
branches/net-snmp54-dev/debian/patches/58_download_mibs.README
branches/net-snmp54-dev/debian/patches/58_download_mibs.patch
branches/net-snmp54/debian/libsnmp-base.config
branches/net-snmp54/debian/libsnmp-base.postinst
branches/net-snmp54/debian/libsnmp-base.templates
branches/net-snmp54/debian/patches/58_download_mibs.README
branches/net-snmp54/debian/patches/58_download_mibs.patch
trunk/debian/libsnmp-base.config
trunk/debian/libsnmp-base.postinst
trunk/debian/libsnmp-base.templates
trunk/debian/patches/58_download_mibs.README
trunk/debian/patches/58_download_mibs.patch
Modified:
branches/net-snmp54-dev/debian/control
branches/net-snmp54-dev/debian/libsnmp-base.prerm
branches/net-snmp54-dev/debian/patches/03_makefiles.patch
branches/net-snmp54-dev/debian/patches/06_extramibs.patch
branches/net-snmp54-dev/debian/patches/series
branches/net-snmp54-dev/debian/rules
branches/net-snmp54-dev/debian/snmpd.default
branches/net-snmp54-dev/debian/snmpd.init
branches/net-snmp54/debian/changelog
branches/net-snmp54/debian/control
branches/net-snmp54/debian/libsnmp-base.install
branches/net-snmp54/debian/libsnmp-base.prerm
branches/net-snmp54/debian/patches/03_makefiles.patch
branches/net-snmp54/debian/patches/06_extramibs.patch
branches/net-snmp54/debian/patches/series
branches/net-snmp54/debian/rules
branches/net-snmp54/debian/snmpd.default
branches/net-snmp54/debian/snmpd.init
trunk/debian/control
trunk/debian/libsnmp-base.install
trunk/debian/libsnmp-base.prerm
trunk/debian/patches/03_makefiles.patch
trunk/debian/patches/06_extramibs.patch
trunk/debian/patches/series
trunk/debian/rules
trunk/debian/snmpd.default
trunk/debian/snmpd.init
Log:
Optionally download MIB files during install
Modified: branches/net-snmp54/debian/changelog
===================================================================
--- branches/net-snmp54/debian/changelog 2009-11-06 18:09:35 UTC (rev 294)
+++ branches/net-snmp54/debian/changelog 2009-11-06 18:11:10 UTC (rev 295)
@@ -34,6 +34,7 @@
such as link-local addresses when VLAN subinterfaces are in use.
(Closes: #531056). Thanks to John Morrissey <jwm at horde.net> for the
patch.
+ * Rework build system (Closes: #528106)
-- Jochen Friedrich <jochen at scram.de> Fri, 06 Nov 2009 15:09:22 +0100
Modified: branches/net-snmp54/debian/control
===================================================================
--- branches/net-snmp54/debian/control 2009-11-06 18:09:35 UTC (rev 294)
+++ branches/net-snmp54/debian/control 2009-11-06 18:11:10 UTC (rev 295)
@@ -46,7 +46,7 @@
Replaces: snmp (<=3.6.2-3), libsnmp, zebra, zebra-pj, quagga, libsnmp-dev (<< 5.4~dfsg), libsnmp9-dev (<< 5.4~dfsg), libsnmp5-dev
Provides: libsnmp
Conflicts: libsnmp, libsnmp-dev (<< 5.4~dfsg), libsnmp9-dev (<< 5.4~dfsg), libsnmp5-dev
-Depends: ${misc:Depends}
+Depends: ${misc:Depends}, gawk, wget
Description: SNMP (Simple Network Management Protocol) MIBs and documentation
The Simple Network Management Protocol (SNMP) provides a framework
for the exchange of management information between agents (servers)
Added: branches/net-snmp54/debian/libsnmp-base.config
===================================================================
--- branches/net-snmp54/debian/libsnmp-base.config (rev 0)
+++ branches/net-snmp54/debian/libsnmp-base.config 2009-11-06 18:11:10 UTC (rev 295)
@@ -0,0 +1,12 @@
+#!/bin/sh
+
+set -e
+
+. /usr/share/debconf/confmodule
+
+db_version 2.0
+
+db_input high libsnmp-base/download_mibs || true
+db_go
+
+exit 0
Modified: branches/net-snmp54/debian/libsnmp-base.install
===================================================================
--- branches/net-snmp54/debian/libsnmp-base.install 2009-11-06 18:09:35 UTC (rev 294)
+++ branches/net-snmp54/debian/libsnmp-base.install 2009-11-06 18:11:10 UTC (rev 295)
@@ -1,4 +1,4 @@
-debian/tmp/usr/share/snmp/mibs
+debian/tmp/usr/share/mibs
debian/tmp/usr/share/snmp/mib2c-data
debian/tmp/usr/share/man/man5/mib2c.conf.5snmp
debian/tmp/usr/share/man/man5/snmp.conf.5snmp
Added: branches/net-snmp54/debian/libsnmp-base.postinst
===================================================================
--- branches/net-snmp54/debian/libsnmp-base.postinst (rev 0)
+++ branches/net-snmp54/debian/libsnmp-base.postinst 2009-11-06 18:11:10 UTC (rev 295)
@@ -0,0 +1,13 @@
+#!/bin/sh
+
+set -e
+
+. /usr/share/debconf/confmodule
+db_version 2.0
+
+db_get libsnmp-base/download_mibs
+if [ "$RET" = "true" ]; then
+ cd /usr/share/mibs; make -f Makefile.mib
+fi
+
+#DEBHELPER#
Modified: branches/net-snmp54/debian/libsnmp-base.prerm
===================================================================
--- branches/net-snmp54/debian/libsnmp-base.prerm 2009-11-06 18:09:35 UTC (rev 294)
+++ branches/net-snmp54/debian/libsnmp-base.prerm 2009-11-06 18:11:10 UTC (rev 295)
@@ -2,7 +2,9 @@
set -e
-rm -f /usr/share/snmp/mibs/.index
+rm -f /usr/share/mibs/netsnmp/.index
+rm -f /usr/share/mibs/ietf/.index
+rm -f /usr/share/mibs/iana/.index
#DEBHELPER#
Added: branches/net-snmp54/debian/libsnmp-base.templates
===================================================================
--- branches/net-snmp54/debian/libsnmp-base.templates (rev 0)
+++ branches/net-snmp54/debian/libsnmp-base.templates 2009-11-06 18:11:10 UTC (rev 295)
@@ -0,0 +1,6 @@
+Template: libsnmp-base/download_mibs
+Type: boolean
+_Description: Download and extract MIBs from RFCs and IANA?
+ Various snmp software needs extracted MIBs from RFCs and IANA -
+ which cannot be shipped - to be working. These MIBs can be
+ automatically fetched and extracted as part of installing this package.
Modified: branches/net-snmp54/debian/patches/03_makefiles.patch
===================================================================
--- branches/net-snmp54/debian/patches/03_makefiles.patch 2009-11-06 18:09:35 UTC (rev 294)
+++ branches/net-snmp54/debian/patches/03_makefiles.patch 2009-11-06 18:11:10 UTC (rev 295)
@@ -1,7 +1,7 @@
Index: net-snmp-5.4.2.1/local/Makefile.in
===================================================================
---- net-snmp-5.4.2.1.orig/local/Makefile.in 2009-11-06 15:03:06.000000000 +0100
-+++ net-snmp-5.4.2.1/local/Makefile.in 2009-11-06 15:05:53.000000000 +0100
+--- net-snmp-5.4.2.1.orig/local/Makefile.in 2009-11-06 17:21:05.000000000 +0100
++++ net-snmp-5.4.2.1/local/Makefile.in 2009-11-06 17:25:10.000000000 +0100
@@ -100,7 +100,7 @@
mib2c.made: $(srcdir)/mib2c
@@ -13,11 +13,14 @@
fi
Index: net-snmp-5.4.2.1/Makefile.top
===================================================================
---- net-snmp-5.4.2.1.orig/Makefile.top 2009-11-06 15:03:06.000000000 +0100
-+++ net-snmp-5.4.2.1/Makefile.top 2009-11-06 15:05:53.000000000 +0100
-@@ -26,6 +26,7 @@
+--- net-snmp-5.4.2.1.orig/Makefile.top 2009-11-06 17:21:05.000000000 +0100
++++ net-snmp-5.4.2.1/Makefile.top 2009-11-06 17:25:41.000000000 +0100
+@@ -24,8 +24,9 @@
+ man5dir = $(mandir)/man5
+ man8dir = $(mandir)/man8
snmplibdir = $(datadir)/snmp
- mibdir = $(snmplibdir)/mibs
+-mibdir = $(snmplibdir)/mibs
++mibdir = $(datadir)/mibs/netsnmp
persistentdir = @PERSISTENT_DIRECTORY@
+sysconfdir = @sysconfdir@
DESTDIR = @INSTALL_PREFIX@
@@ -25,17 +28,21 @@
Index: net-snmp-5.4.2.1/mibs/Makefile.in
===================================================================
---- net-snmp-5.4.2.1.orig/mibs/Makefile.in 2009-11-06 15:03:06.000000000 +0100
-+++ net-snmp-5.4.2.1/mibs/Makefile.in 2009-11-06 15:07:25.000000000 +0100
-@@ -13,57 +13,35 @@
+--- net-snmp-5.4.2.1.orig/mibs/Makefile.in 2009-11-06 17:21:05.000000000 +0100
++++ net-snmp-5.4.2.1/mibs/Makefile.in 2009-11-06 17:25:10.000000000 +0100
+@@ -13,53 +13,33 @@
OTHERUNINSTALL=mibsuninstall
-V1MIBS = RFC1155-SMI.txt RFC1213-MIB.txt RFC-1215.txt
--
++NETSNMPMIBS = NET-SNMP-TC NET-SNMP-MIB NET-SNMP-AGENT-MIB \
++ NET-SNMP-EXAMPLES-MIB NET-SNMP-EXTEND-MIB
+
-V2MIBS = SNMPv2-CONF.txt SNMPv2-SMI.txt SNMPv2-TC.txt SNMPv2-TM.txt \
- SNMPv2-MIB.txt
--
++UCDMIBS = UCD-SNMP-MIB UCD-DEMO-MIB UCD-IPFWACC-MIB \
++ UCD-DLMOD-MIB UCD-DISKIO-MIB
+
-V3MIBS = SNMP-FRAMEWORK-MIB.txt SNMP-MPD-MIB.txt SNMP-TARGET-MIB.txt \
- SNMP-NOTIFICATION-MIB.txt SNMP-PROXY-MIB.txt \
- SNMP-USER-BASED-SM-MIB.txt SNMP-VIEW-BASED-ACM-MIB.txt \
@@ -60,20 +67,19 @@
- SNMP-USM-DH-OBJECTS-MIB.txt \
- SCTP-MIB.txt
-
- NETSNMPMIBS = NET-SNMP-TC.txt NET-SNMP-MIB.txt NET-SNMP-AGENT-MIB.txt \
- NET-SNMP-EXAMPLES-MIB.txt NET-SNMP-EXTEND-MIB.txt
-
- UCDMIBS = UCD-SNMP-MIB.txt UCD-DEMO-MIB.txt UCD-IPFWACC-MIB.txt \
- UCD-DLMOD-MIB.txt UCD-DISKIO-MIB.txt
-
+-NETSNMPMIBS = NET-SNMP-TC.txt NET-SNMP-MIB.txt NET-SNMP-AGENT-MIB.txt \
+- NET-SNMP-EXAMPLES-MIB.txt NET-SNMP-EXTEND-MIB.txt
+-
+-UCDMIBS = UCD-SNMP-MIB.txt UCD-DEMO-MIB.txt UCD-IPFWACC-MIB.txt \
+- UCD-DLMOD-MIB.txt UCD-DISKIO-MIB.txt
+-
-DEFAULTMIBS = @default_mibs_install@
-+EXTRAMIBS = BGP4-MIB.txt BRIDGE-MIB.txt GNOME-SMI.txt OSPF-MIB.txt \
-+ OSPF-TRAP-MIB.txt RIPv2-MIB.txt SOURCE-ROUTING-MIB.txt \
-+ LM-SENSORS-MIB.txt
-
+-
-MIBS = $(V1MIBS) $(V2MIBS) $(V3MIBS) $(RFCMIBS) \
- $(AGENTMIBS) $(IANAMIBS) \
- $(NETSNMPMIBS) $(UCDMIBS) $(DEFAULTMIBS)
++EXTRAMIBS = GNOME-SMI LM-SENSORS-MIB
++
+MIBS = $(NETSNMPMIBS) $(UCDMIBS) $(EXTRAMIBS)
+
+HELPERS = Makefile.mib ianalist rfclist rfcmibs.diff
@@ -83,51 +89,37 @@
mibsinstall: installdirs
- @for i in $(MIBS) ; do \
-+ @for i in $(MIBS) $(HELPERS) ; do \
- $(INSTALL_DATA) $(srcdir)/$$i $(INSTALL_PREFIX)$(mibdir) ; \
- echo "install: installed $$i in $(INSTALL_PREFIX)$(mibdir)" ; \
- done
-+ @for i in $(BINHELPERS) ; do \
-+ $(INSTALL) $(srcdir)/$$i $(INSTALL_PREFIX)$(mibdir) ; \
-+ echo "install: installed $$i in $(INSTALL_PREFIX)$(mibdir)" ; \
+- $(INSTALL_DATA) $(srcdir)/$$i $(INSTALL_PREFIX)$(mibdir) ; \
+- echo "install: installed $$i in $(INSTALL_PREFIX)$(mibdir)" ; \
++ @for i in $(MIBS); do \
++ $(INSTALL_DATA) $(srcdir)/$$i.txt $(INSTALL_PREFIX)$(mibdir)/$$i ; \
++ echo "install: installed $$i.txt in $(INSTALL_PREFIX)$(mibdir)/$$i" ; \
+ done
++ @for i in $(HELPERS); do \
++ $(INSTALL_DATA) $(srcdir)/$$i $(INSTALL_PREFIX)$(datadir)/mibs ; \
++ echo "install: installed $$i in $(INSTALL_PREFIX)$(datadir)/mibs" ; \
++ done
++ @for i in $(BINHELPERS) ; do \
++ $(INSTALL) $(srcdir)/$$i $(INSTALL_PREFIX)$(datadir)/mibs ; \
++ echo "install: installed $$i in $(INSTALL_PREFIX)$(datadir)/mibs" ; \
+ done
mibsuninstall: installdirs
-- @for i in $(MIBS) ; do \
-+ @for i in $(MIBS) $(HELPERS) $(BINHELPERS) ; do \
+@@ -67,6 +47,10 @@
rm -f $(INSTALL_PREFIX)$(mibdir)/$$i ; \
echo "removed $$i from $(INSTALL_PREFIX)$(mibdir)" ; \
done
-Index: net-snmp-5.4.2.1/mibs/Makefile.mib
-===================================================================
---- net-snmp-5.4.2.1.orig/mibs/Makefile.mib 2009-11-06 15:03:06.000000000 +0100
-+++ net-snmp-5.4.2.1/mibs/Makefile.mib 2009-11-06 15:05:53.000000000 +0100
-@@ -5,9 +5,9 @@
- IANAHOST = http://www.iana.org
- IANADIR = assignments
++ @for i in $(HELPERS) $(BINHELPERS) ; do \
++ rm -f $(INSTALL_PREFIX)$(mibdir)/$$i ; \
++ echo "removed $$i from $(INSTALL_PREFIX)$(datadir)/mibs" ; \
++ done
--PREFIX = /usr/local
--ALLDIR = $(PREFIX)/share/snmp/rfc.orig
--INSTDIR = $(PREFIX)/share/snmp/rfc
-+PREFIX = /usr
-+ALLDIR = /var/tmp/rfc.orig
-+INSTDIR = $(PREFIX)/share/snmp/mibs
-
- MIBS = SNMPv2-TC.txt SNMPv2-TM.txt SNMPv2-SMI.txt SNMPv2-MIB.txt \
- SNMPv2-CONF.txt HCNUM-TC.txt INET-ADDRESS-MIB.txt \
-@@ -158,7 +158,7 @@
- RFC1213-MIB.txt: $(MIBDEPS)
- ./mibfetch $(RFCHOST) $(RFCDIR) 1213
-
--SCTP.txt: $(MIBDEPS)
-+SCTP-MIB.txt: $(MIBDEPS)
- ./mibfetch $(RFCHOST) $(RFCDIR) 3873
-
- ianamibs: ianalist
+ installdirs:
+ @$(SHELL) $(srcdir)/../mkinstalldirs $(INSTALL_PREFIX)$(mibdir)
Index: net-snmp-5.4.2.1/Makefile.in
===================================================================
---- net-snmp-5.4.2.1.orig/Makefile.in 2009-11-06 15:03:06.000000000 +0100
-+++ net-snmp-5.4.2.1/Makefile.in 2009-11-06 15:05:53.000000000 +0100
+--- net-snmp-5.4.2.1.orig/Makefile.in 2009-11-06 17:21:05.000000000 +0100
++++ net-snmp-5.4.2.1/Makefile.in 2009-11-06 17:25:10.000000000 +0100
@@ -156,7 +156,7 @@
#
# override LD_RUN_PATH to avoid dependencies on the build directory
Modified: branches/net-snmp54/debian/patches/06_extramibs.patch
===================================================================
--- branches/net-snmp54/debian/patches/06_extramibs.patch 2009-11-06 18:09:35 UTC (rev 294)
+++ branches/net-snmp54/debian/patches/06_extramibs.patch 2009-11-06 18:11:10 UTC (rev 295)
@@ -1,2015 +1,3 @@
-diff -ruN net-snmp-5.4.1.orig/mibs/BGP4-MIB.txt net-snmp-5.4.1/mibs/BGP4-MIB.txt
---- net-snmp-5.4.1.orig/mibs/BGP4-MIB.txt 1970-01-01 01:00:00.000000000 +0100
-+++ net-snmp-5.4.1/mibs/BGP4-MIB.txt 2007-09-20 16:30:52.000000000 +0200
-@@ -0,0 +1,929 @@
-+ BGP4-MIB DEFINITIONS ::= BEGIN
-+
-+ IMPORTS
-+ MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE,
-+ IpAddress, Integer32, Counter32, Gauge32, mib-2
-+ FROM SNMPv2-SMI
-+ MODULE-COMPLIANCE, OBJECT-GROUP, NOTIFICATION-GROUP
-+ FROM SNMPv2-CONF;
-+
-+ bgp MODULE-IDENTITY
-+ LAST-UPDATED "9902100000Z"
-+ ORGANIZATION "IETF IDR Working Group"
-+ CONTACT-INFO "E-mail: idr at merit.net
-+
-+ Susan Hares (Editor)
-+ Merit Network
-+ 4251 Plymouth Road
-+ Suite C
-+ Ann Arbor, MI 48105-2785
-+ Tel: +1 734 936 2095
-+ Fax: +1 734 647 3185
-+ E-mail: skh at merit.edu
-+
-+ Jeff Johnson (Editor)
-+ RedBack Networks, Inc.
-+ 1389 Moffett Park Drive
-+ Sunnyvale, CA 94089-1134
-+ Tel: +1 408 548 3516
-+ Fax: +1 408 548 3599
-+ E-mail: jeff at redback.com"
-+ DESCRIPTION
-+ "The MIB module for BGP-4."
-+ REVISION "9902100000Z"
-+ DESCRIPTION
-+ "Corrected duplicate OBJECT IDENTIFIER
-+ assignment in the conformance information."
-+ REVISION "9601080000Z"
-+ DESCRIPTION
-+ "1) Fixed the definitions of the traps to
-+ make them equivalent to their initial
-+ definition in RFC 1269.
-+ 2) Added compliance and conformance info."
-+ ::= { mib-2 15 }
-+
-+ bgpVersion OBJECT-TYPE
-+ SYNTAX OCTET STRING (SIZE (1..255))
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "Vector of supported BGP protocol version
-+ numbers. Each peer negotiates the version
-+ from this vector. Versions are identified
-+ via the string of bits contained within this
-+ object. The first octet contains bits 0 to
-+ 7, the second octet contains bits 8 to 15,
-+ and so on, with the most significant bit
-+ referring to the lowest bit number in the
-+ octet (e.g., the MSB of the first octet
-+ refers to bit 0). If a bit, i, is present
-+ and set, then the version (i+1) of the BGP
-+ is supported."
-+ ::= { bgp 1 }
-+
-+ bgpLocalAs OBJECT-TYPE
-+ SYNTAX INTEGER (0..65535)
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "The local autonomous system number."
-+ ::= { bgp 2 }
-+
-+
-+
-+ -- BGP Peer table. This table contains, one entry per BGP
-+ -- peer, information about the BGP peer.
-+
-+ bgpPeerTable OBJECT-TYPE
-+ SYNTAX SEQUENCE OF BgpPeerEntry
-+ MAX-ACCESS not-accessible
-+ STATUS current
-+ DESCRIPTION
-+ "BGP peer table. This table contains,
-+ one entry per BGP peer, information about the
-+ connections with BGP peers."
-+ ::= { bgp 3 }
-+
-+ bgpPeerEntry OBJECT-TYPE
-+ SYNTAX BgpPeerEntry
-+ MAX-ACCESS not-accessible
-+ STATUS current
-+ DESCRIPTION
-+ "Entry containing information about the
-+ connection with a BGP peer."
-+ INDEX { bgpPeerRemoteAddr }
-+ ::= { bgpPeerTable 1 }
-+
-+ BgpPeerEntry ::= SEQUENCE {
-+ bgpPeerIdentifier
-+ IpAddress,
-+ bgpPeerState
-+ INTEGER,
-+ bgpPeerAdminStatus
-+ INTEGER,
-+ bgpPeerNegotiatedVersion
-+ Integer32,
-+ bgpPeerLocalAddr
-+ IpAddress,
-+ bgpPeerLocalPort
-+ INTEGER,
-+ bgpPeerRemoteAddr
-+ IpAddress,
-+ bgpPeerRemotePort
-+ INTEGER,
-+ bgpPeerRemoteAs
-+ INTEGER,
-+ bgpPeerInUpdates
-+ Counter32,
-+ bgpPeerOutUpdates
-+ Counter32,
-+ bgpPeerInTotalMessages
-+ Counter32,
-+ bgpPeerOutTotalMessages
-+ Counter32,
-+ bgpPeerLastError
-+ OCTET STRING,
-+ bgpPeerFsmEstablishedTransitions
-+ Counter32,
-+ bgpPeerFsmEstablishedTime
-+ Gauge32,
-+ bgpPeerConnectRetryInterval
-+ INTEGER,
-+ bgpPeerHoldTime
-+ INTEGER,
-+ bgpPeerKeepAlive
-+ INTEGER,
-+ bgpPeerHoldTimeConfigured
-+ INTEGER,
-+ bgpPeerKeepAliveConfigured
-+ INTEGER,
-+ bgpPeerMinASOriginationInterval
-+ INTEGER,
-+ bgpPeerMinRouteAdvertisementInterval
-+ INTEGER,
-+ bgpPeerInUpdateElapsedTime
-+ Gauge32
-+ }
-+
-+ bgpPeerIdentifier OBJECT-TYPE
-+ SYNTAX IpAddress
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "The BGP Identifier of this entry's BGP peer."
-+ ::= { bgpPeerEntry 1 }
-+
-+ bgpPeerState OBJECT-TYPE
-+ SYNTAX INTEGER {
-+ idle(1),
-+ connect(2),
-+ active(3),
-+ opensent(4),
-+ openconfirm(5),
-+ established(6)
-+ }
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "The BGP peer connection state."
-+ ::= { bgpPeerEntry 2 }
-+
-+ bgpPeerAdminStatus OBJECT-TYPE
-+ SYNTAX INTEGER {
-+ stop(1),
-+ start(2)
-+ }
-+ MAX-ACCESS read-write
-+ STATUS current
-+ DESCRIPTION
-+ "The desired state of the BGP connection. A
-+ transition from 'stop' to 'start' will cause
-+ the BGP Start Event to be generated. A
-+ transition from 'start' to 'stop' will cause
-+ the BGP Stop Event to be generated. This
-+ parameter can be used to restart BGP peer
-+ connections. Care should be used in providing
-+ write access to this object without adequate
-+ authentication."
-+ ::= { bgpPeerEntry 3 }
-+
-+ bgpPeerNegotiatedVersion OBJECT-TYPE
-+ SYNTAX Integer32
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "The negotiated version of BGP running between
-+ the two peers."
-+ ::= { bgpPeerEntry 4 }
-+
-+ bgpPeerLocalAddr OBJECT-TYPE
-+ SYNTAX IpAddress
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "The local IP address of this entry's BGP
-+ connection."
-+ ::= { bgpPeerEntry 5 }
-+
-+ bgpPeerLocalPort OBJECT-TYPE
-+ SYNTAX INTEGER (0..65535)
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "The local port for the TCP connection between
-+ the BGP peers."
-+ ::= { bgpPeerEntry 6 }
-+
-+ bgpPeerRemoteAddr OBJECT-TYPE
-+ SYNTAX IpAddress
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "The remote IP address of this entry's BGP
-+ peer."
-+ ::= { bgpPeerEntry 7 }
-+
-+ bgpPeerRemotePort OBJECT-TYPE
-+ SYNTAX INTEGER (0..65535)
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "The remote port for the TCP connection between
-+ the BGP peers. Note that the objects
-+ bgpPeerLocalAddr, bgpPeerLocalPort,
-+ bgpPeerRemoteAddr and bgpPeerRemotePort
-+ provide the appropriate reference to the
-+ standard MIB TCP connection table."
-+ ::= { bgpPeerEntry 8 }
-+
-+ bgpPeerRemoteAs OBJECT-TYPE
-+ SYNTAX INTEGER (0..65535)
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "The remote autonomous system number."
-+ ::= { bgpPeerEntry 9 }
-+
-+ bgpPeerInUpdates OBJECT-TYPE
-+ SYNTAX Counter32
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "The number of BGP UPDATE messages received on
-+ this connection. This object should be
-+ initialized to zero (0) when the connection is
-+ established."
-+ ::= { bgpPeerEntry 10 }
-+
-+ bgpPeerOutUpdates OBJECT-TYPE
-+ SYNTAX Counter32
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "The number of BGP UPDATE messages transmitted
-+ on this connection. This object should be
-+ initialized to zero (0) when the connection is
-+ established."
-+ ::= { bgpPeerEntry 11 }
-+
-+ bgpPeerInTotalMessages OBJECT-TYPE
-+ SYNTAX Counter32
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "The total number of messages received from the
-+ remote peer on this connection. This object
-+ should be initialized to zero when the
-+ connection is established."
-+ ::= { bgpPeerEntry 12 }
-+
-+ bgpPeerOutTotalMessages OBJECT-TYPE
-+ SYNTAX Counter32
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "The total number of messages transmitted to
-+ the remote peer on this connection. This object
-+ should be initialized to zero when the
-+ connection is established."
-+ ::= { bgpPeerEntry 13 }
-+
-+ bgpPeerLastError OBJECT-TYPE
-+ SYNTAX OCTET STRING (SIZE (2))
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "The last error code and subcode seen by this
-+ peer on this connection. If no error has
-+ occurred, this field is zero. Otherwise, the
-+ first byte of this two byte OCTET STRING
-+ contains the error code, and the second byte
-+ contains the subcode."
-+ ::= { bgpPeerEntry 14 }
-+
-+ bgpPeerFsmEstablishedTransitions OBJECT-TYPE
-+ SYNTAX Counter32
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "The total number of times the BGP FSM
-+ transitioned into the established state."
-+ ::= { bgpPeerEntry 15 }
-+
-+ bgpPeerFsmEstablishedTime OBJECT-TYPE
-+ SYNTAX Gauge32
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "This timer indicates how long (in seconds) this
-+ peer has been in the Established state or how long
-+ since this peer was last in the Established state.
-+ It is set to zero when a new peer is configured or
-+ the router is booted."
-+ ::= { bgpPeerEntry 16 }
-+
-+ bgpPeerConnectRetryInterval OBJECT-TYPE
-+ SYNTAX INTEGER (1..65535)
-+ MAX-ACCESS read-write
-+ STATUS current
-+ DESCRIPTION
-+ "Time interval in seconds for the ConnectRetry
-+ timer. The suggested value for this timer is
-+ 120 seconds."
-+ ::= { bgpPeerEntry 17 }
-+
-+ bgpPeerHoldTime OBJECT-TYPE
-+ SYNTAX INTEGER ( 0 | 3..65535 )
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "Time interval in seconds for the Hold Timer
-+ established with the peer. The value of this
-+ object is calculated by this BGP speaker by
-+ using the smaller of the value in
-+ bgpPeerHoldTimeConfigured and the Hold Time
-+ received in the OPEN message. This value
-+ must be at lease three seconds if it is not
-+ zero (0) in which case the Hold Timer has
-+ not been established with the peer, or, the
-+ value of bgpPeerHoldTimeConfigured is zero (0)."
-+ ::= { bgpPeerEntry 18 }
-+
-+ bgpPeerKeepAlive OBJECT-TYPE
-+ SYNTAX INTEGER ( 0 | 1..21845 )
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "Time interval in seconds for the KeepAlive
-+ timer established with the peer. The value of
-+ this object is calculated by this BGP speaker
-+ such that, when compared with bgpPeerHoldTime,
-+ it has the same proportion as what
-+ bgpPeerKeepAliveConfigured has when compared
-+ with bgpPeerHoldTimeConfigured. If the value
-+ of this object is zero (0), it indicates that
-+ the KeepAlive timer has not been established
-+ with the peer, or, the value of
-+ bgpPeerKeepAliveConfigured is zero (0)."
-+ ::= { bgpPeerEntry 19 }
-+
-+ bgpPeerHoldTimeConfigured OBJECT-TYPE
-+ SYNTAX INTEGER ( 0 | 3..65535 )
-+ MAX-ACCESS read-write
-+ STATUS current
-+ DESCRIPTION
-+ "Time interval in seconds for the Hold Time
-+ configured for this BGP speaker with this peer.
-+ This value is placed in an OPEN message sent to
-+ this peer by this BGP speaker, and is compared
-+ with the Hold Time field in an OPEN message
-+ received from the peer when determining the Hold
-+ Time (bgpPeerHoldTime) with the peer. This value
-+ must not be less than three seconds if it is not
-+ zero (0) in which case the Hold Time is NOT to be
-+ established with the peer. The suggested value for
-+ this timer is 90 seconds."
-+ ::= { bgpPeerEntry 20 }
-+
-+ bgpPeerKeepAliveConfigured OBJECT-TYPE
-+ SYNTAX INTEGER ( 0 | 1..21845 )
-+ MAX-ACCESS read-write
-+ STATUS current
-+ DESCRIPTION
-+ "Time interval in seconds for the KeepAlive timer
-+ configured for this BGP speaker with this peer.
-+ The value of this object will only determine the
-+ KEEPALIVE messages' frequency relative to the value
-+ specified in bgpPeerHoldTimeConfigured; the actual
-+ time interval for the KEEPALIVE messages is
-+ indicated by bgpPeerKeepAlive. A reasonable
-+ maximum value for this timer would be configured to
-+ be one third of that of bgpPeerHoldTimeConfigured.
-+ If the value of this object is zero (0), no
-+ periodical KEEPALIVE messages are sent to the peer
-+ after the BGP connection has been established. The
-+ suggested value for this timer is 30 seconds."
-+ ::= { bgpPeerEntry 21 }
-+
-+ bgpPeerMinASOriginationInterval OBJECT-TYPE
-+ SYNTAX INTEGER (1..65535)
-+ MAX-ACCESS read-write
-+ STATUS current
-+ DESCRIPTION
-+ "Time interval in seconds for the
-+ MinASOriginationInterval timer.
-+ The suggested value for this timer is 15 seconds."
-+ ::= { bgpPeerEntry 22 }
-+
-+ bgpPeerMinRouteAdvertisementInterval OBJECT-TYPE
-+ SYNTAX INTEGER (1..65535)
-+ MAX-ACCESS read-write
-+ STATUS current
-+ DESCRIPTION
-+ "Time interval in seconds for the
-+ MinRouteAdvertisementInterval timer.
-+ The suggested value for this timer is 30 seconds."
-+ ::= { bgpPeerEntry 23 }
-+
-+ bgpPeerInUpdateElapsedTime OBJECT-TYPE
-+ SYNTAX Gauge32
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "Elapsed time in seconds since the last BGP
-+ UPDATE message was received from the peer.
-+ Each time bgpPeerInUpdates is incremented,
-+ the value of this object is set to zero (0)."
-+ ::= { bgpPeerEntry 24 }
-+
-+
-+
-+ bgpIdentifier OBJECT-TYPE
-+ SYNTAX IpAddress
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "The BGP Identifier of local system."
-+ ::= { bgp 4 }
-+
-+
-+
-+ -- Received Path Attribute Table. This table contains,
-+ -- one entry per path to a network, path attributes
-+ -- received from all peers running BGP version 3 or less.
-+ -- This table is obsolete, having been replaced in
-+ -- functionality with the bgp4PathAttrTable.
-+
-+ bgpRcvdPathAttrTable OBJECT-TYPE
-+ SYNTAX SEQUENCE OF BgpPathAttrEntry
-+ MAX-ACCESS not-accessible
-+ STATUS obsolete
-+ DESCRIPTION
-+ "The BGP Received Path Attribute Table contains
-+ information about paths to destination networks
-+ received from all peers running BGP version 3 or
-+ less."
-+ ::= { bgp 5 }
-+
-+ bgpPathAttrEntry OBJECT-TYPE
-+ SYNTAX BgpPathAttrEntry
-+ MAX-ACCESS not-accessible
-+ STATUS obsolete
-+ DESCRIPTION
-+ "Information about a path to a network."
-+ INDEX { bgpPathAttrDestNetwork,
-+ bgpPathAttrPeer }
-+ ::= { bgpRcvdPathAttrTable 1 }
-+
-+ BgpPathAttrEntry ::= SEQUENCE {
-+ bgpPathAttrPeer
-+ IpAddress,
-+ bgpPathAttrDestNetwork
-+ IpAddress,
-+ bgpPathAttrOrigin
-+ INTEGER,
-+ bgpPathAttrASPath
-+ OCTET STRING,
-+ bgpPathAttrNextHop
-+ IpAddress,
-+ bgpPathAttrInterASMetric
-+ Integer32
-+ }
-+
-+ bgpPathAttrPeer OBJECT-TYPE
-+ SYNTAX IpAddress
-+ MAX-ACCESS read-only
-+ STATUS obsolete
-+ DESCRIPTION
-+ "The IP address of the peer where the path
-+ information was learned."
-+ ::= { bgpPathAttrEntry 1 }
-+
-+ bgpPathAttrDestNetwork OBJECT-TYPE
-+ SYNTAX IpAddress
-+ MAX-ACCESS read-only
-+ STATUS obsolete
-+ DESCRIPTION
-+ "The address of the destination network."
-+ ::= { bgpPathAttrEntry 2 }
-+
-+ bgpPathAttrOrigin OBJECT-TYPE
-+ SYNTAX INTEGER {
-+ igp(1),-- networks are interior
-+ egp(2),-- networks learned via EGP
-+ incomplete(3) -- undetermined
-+ }
-+ MAX-ACCESS read-only
-+ STATUS obsolete
-+ DESCRIPTION
-+ "The ultimate origin of the path information."
-+ ::= { bgpPathAttrEntry 3 }
-+
-+ bgpPathAttrASPath OBJECT-TYPE
-+ SYNTAX OCTET STRING (SIZE (2..255))
-+ MAX-ACCESS read-only
-+ STATUS obsolete
-+ DESCRIPTION
-+ "The set of ASs that must be traversed to reach
-+ the network. This object is probably best
-+ represented as SEQUENCE OF INTEGER. For SMI
-+ compatibility, though, it is represented as
-+ OCTET STRING. Each AS is represented as a pair
-+ of octets according to the following algorithm:
-+
-+ first-byte-of-pair = ASNumber / 256;
-+ second-byte-of-pair = ASNumber & 255;"
-+ ::= { bgpPathAttrEntry 4 }
-+
-+ bgpPathAttrNextHop OBJECT-TYPE
-+ SYNTAX IpAddress
-+ MAX-ACCESS read-only
-+ STATUS obsolete
-+ DESCRIPTION
-+ "The address of the border router that should
-+ be used for the destination network."
-+ ::= { bgpPathAttrEntry 5 }
-+
-+ bgpPathAttrInterASMetric OBJECT-TYPE
-+ SYNTAX Integer32
-+ MAX-ACCESS read-only
-+ STATUS obsolete
-+ DESCRIPTION
-+ "The optional inter-AS metric. If this
-+ attribute has not been provided for this route,
-+ the value for this object is 0."
-+ ::= { bgpPathAttrEntry 6 }
-+
-+
-+
-+ -- BGP-4 Received Path Attribute Table. This table contains,
-+ -- one entry per path to a network, path attributes
-+ -- received from all peers running BGP-4.
-+
-+ bgp4PathAttrTable OBJECT-TYPE
-+ SYNTAX SEQUENCE OF Bgp4PathAttrEntry
-+ MAX-ACCESS not-accessible
-+ STATUS current
-+ DESCRIPTION
-+ "The BGP-4 Received Path Attribute Table contains
-+ information about paths to destination networks
-+ received from all BGP4 peers."
-+ ::= { bgp 6 }
-+
-+ bgp4PathAttrEntry OBJECT-TYPE
-+ SYNTAX Bgp4PathAttrEntry
-+ MAX-ACCESS not-accessible
-+ STATUS current
-+ DESCRIPTION
-+ "Information about a path to a network."
-+ INDEX { bgp4PathAttrIpAddrPrefix,
-+ bgp4PathAttrIpAddrPrefixLen,
-+ bgp4PathAttrPeer }
-+ ::= { bgp4PathAttrTable 1 }
-+
-+ Bgp4PathAttrEntry ::= SEQUENCE {
-+ bgp4PathAttrPeer
-+ IpAddress,
-+ bgp4PathAttrIpAddrPrefixLen
-+ INTEGER,
-+ bgp4PathAttrIpAddrPrefix
-+ IpAddress,
-+ bgp4PathAttrOrigin
-+ INTEGER,
-+ bgp4PathAttrASPathSegment
-+ OCTET STRING,
-+ bgp4PathAttrNextHop
-+ IpAddress,
-+ bgp4PathAttrMultiExitDisc
-+ INTEGER,
-+ bgp4PathAttrLocalPref
-+ INTEGER,
-+ bgp4PathAttrAtomicAggregate
-+ INTEGER,
-+ bgp4PathAttrAggregatorAS
-+ INTEGER,
-+ bgp4PathAttrAggregatorAddr
-+ IpAddress,
-+ bgp4PathAttrCalcLocalPref
-+ INTEGER,
-+ bgp4PathAttrBest
-+ INTEGER,
-+ bgp4PathAttrUnknown
-+ OCTET STRING
-+ }
-+
-+ bgp4PathAttrPeer OBJECT-TYPE
-+ SYNTAX IpAddress
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "The IP address of the peer where the path
-+ information was learned."
-+ ::= { bgp4PathAttrEntry 1 }
-+ bgp4PathAttrIpAddrPrefixLen OBJECT-TYPE
-+ SYNTAX INTEGER (0..32)
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "Length in bits of the IP address prefix in the
-+ Network Layer Reachability Information field."
-+ ::= { bgp4PathAttrEntry 2 }
-+
-+ bgp4PathAttrIpAddrPrefix OBJECT-TYPE
-+ SYNTAX IpAddress
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "An IP address prefix in the Network Layer
-+ Reachability Information field. This object
-+ is an IP address containing the prefix with
-+ length specified by bgp4PathAttrIpAddrPrefixLen.
-+ Any bits beyond the length specified by
-+ bgp4PathAttrIpAddrPrefixLen are zeroed."
-+ ::= { bgp4PathAttrEntry 3 }
-+
-+ bgp4PathAttrOrigin OBJECT-TYPE
-+ SYNTAX INTEGER {
-+ igp(1),-- networks are interior
-+ egp(2),-- networks learned via EGP
-+ incomplete(3) -- undetermined
-+ }
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "The ultimate origin of the path information."
-+ ::= { bgp4PathAttrEntry 4 }
-+
-+ bgp4PathAttrASPathSegment OBJECT-TYPE
-+ SYNTAX OCTET STRING (SIZE (2..255))
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "The sequence of AS path segments. Each AS
-+ path segment is represented by a triple
-+ <type, length, value>.
-+
-+ The type is a 1-octet field which has two
-+ possible values:
-+ 1 AS_SET: unordered set of ASs a
-+ route in the UPDATE message
-+ has traversed
-+ 2 AS_SEQUENCE: ordered set of ASs
-+ a route in the UPDATE message
-+ has traversed.
-+
-+ The length is a 1-octet field containing the
-+ number of ASs in the value field.
-+
-+ The value field contains one or more AS
-+ numbers, each AS is represented in the octet
-+ string as a pair of octets according to the
-+ following algorithm:
-+
-+ first-byte-of-pair = ASNumber / 256;
-+ second-byte-of-pair = ASNumber & 255;"
-+ ::= { bgp4PathAttrEntry 5 }
-+
-+ bgp4PathAttrNextHop OBJECT-TYPE
-+ SYNTAX IpAddress
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "The address of the border router that should
-+ be used for the destination network."
-+ ::= { bgp4PathAttrEntry 6 }
-+
-+ bgp4PathAttrMultiExitDisc OBJECT-TYPE
-+ SYNTAX INTEGER (-1..2147483647)
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "This metric is used to discriminate between
-+ multiple exit points to an adjacent autonomous
-+ system. A value of -1 indicates the absence of
-+ this attribute."
-+ ::= { bgp4PathAttrEntry 7 }
-+
-+ bgp4PathAttrLocalPref OBJECT-TYPE
-+ SYNTAX INTEGER (-1..2147483647)
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "The originating BGP4 speaker's degree of
-+ preference for an advertised route. A value of
-+ -1 indicates the absence of this attribute."
-+ ::= { bgp4PathAttrEntry 8 }
-+
-+ bgp4PathAttrAtomicAggregate OBJECT-TYPE
-+ SYNTAX INTEGER {
-+ lessSpecificRrouteNotSelected(1),
-+ lessSpecificRouteSelected(2)
-+ }
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "Whether or not a system has selected
-+ a less specific route without selecting a
-+ more specific route."
-+ ::= { bgp4PathAttrEntry 9 }
-+
-+ bgp4PathAttrAggregatorAS OBJECT-TYPE
-+ SYNTAX INTEGER (0..65535)
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "The AS number of the last BGP4 speaker that
-+ performed route aggregation. A value of zero (0)
-+ indicates the absence of this attribute."
-+ ::= { bgp4PathAttrEntry 10 }
-+
-+ bgp4PathAttrAggregatorAddr OBJECT-TYPE
-+ SYNTAX IpAddress
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "The IP address of the last BGP4 speaker that
-+ performed route aggregation. A value of
-+ 0.0.0.0 indicates the absence of this attribute."
-+ ::= { bgp4PathAttrEntry 11 }
-+
-+ bgp4PathAttrCalcLocalPref OBJECT-TYPE
-+ SYNTAX INTEGER (-1..2147483647)
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "The degree of preference calculated by the
-+ receiving BGP4 speaker for an advertised route.
-+ A value of -1 indicates the absence of this
-+ attribute."
-+ ::= { bgp4PathAttrEntry 12 }
-+
-+ bgp4PathAttrBest OBJECT-TYPE
-+ SYNTAX INTEGER {
-+ false(1),-- not chosen as best route
-+ true(2) -- chosen as best route
-+ }
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "An indication of whether or not this route
-+ was chosen as the best BGP4 route."
-+ ::= { bgp4PathAttrEntry 13 }
-+
-+ bgp4PathAttrUnknown OBJECT-TYPE
-+ SYNTAX OCTET STRING (SIZE(0..255))
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "One or more path attributes not understood
-+ by this BGP4 speaker. Size zero (0) indicates
-+ the absence of such attribute(s). Octets
-+ beyond the maximum size, if any, are not
-+ recorded by this object."
-+ ::= { bgp4PathAttrEntry 14 }
-+
-+
-+ -- Traps.
-+
-+ -- note that in RFC 1657, bgpTraps was incorrectly
-+ -- assigned a value of { bgp 7 }, and each of the
-+ -- traps had the bgpPeerRemoteAddr object inappropriately
-+ -- removed from their OBJECTS clause. The following
-+ -- definitions restore the semantics of the traps as
-+ -- they were initially defined in RFC 1269.
-+
-+ -- { bgp 7 } is unused
-+
-+ bgpTraps OBJECT IDENTIFIER ::= { bgp 0 }
-+
-+ bgpEstablished NOTIFICATION-TYPE
-+ OBJECTS { bgpPeerRemoteAddr,
-+ bgpPeerLastError,
-+ bgpPeerState }
-+ STATUS current
-+ DESCRIPTION
-+ "The BGP Established event is generated when
-+ the BGP FSM enters the ESTABLISHED state."
-+ ::= { bgpTraps 1 }
-+
-+ bgpBackwardTransition NOTIFICATION-TYPE
-+ OBJECTS { bgpPeerRemoteAddr,
-+ bgpPeerLastError,
-+ bgpPeerState }
-+ STATUS current
-+ DESCRIPTION
-+ "The BGPBackwardTransition Event is generated
-+ when the BGP FSM moves from a higher numbered
-+ state to a lower numbered state."
-+ ::= { bgpTraps 2 }
-+
-+ -- conformance information
-+
-+ bgpMIBConformance OBJECT IDENTIFIER ::= { bgp 8 }
-+ bgpMIBCompliances OBJECT IDENTIFIER ::= { bgpMIBConformance 1 }
-+ bgpMIBGroups OBJECT IDENTIFIER ::= { bgpMIBConformance 2 }
-+
-+ -- compliance statements
-+
-+ bgpMIBCompliance MODULE-COMPLIANCE
-+ STATUS current
-+ DESCRIPTION
-+ "The compliance statement for entities which
-+ implement the BGP4 mib."
-+ MODULE -- this module
-+ MANDATORY-GROUPS { bgp4MIBGlobalsGroup,
-+ bgp4MIBPeerGroup,
-+ bgp4MIBPathAttrGroup,
-+ bgp4MIBNotificationGroup }
-+ ::= { bgpMIBCompliances 1 }
-+
-+ -- units of conformance
-+
-+ bgp4MIBGlobalsGroup OBJECT-GROUP
-+ OBJECTS { bgpVersion,
-+ bgpLocalAs,
-+ bgpIdentifier }
-+ STATUS current
-+ DESCRIPTION
-+ "A collection of objects providing information
-+ on global BGP state."
-+ ::= { bgpMIBGroups 1 }
-+
-+ bgp4MIBPeerGroup OBJECT-GROUP
-+ OBJECTS { bgpPeerIdentifier,
-+ bgpPeerState,
-+ bgpPeerAdminStatus,
-+ bgpPeerNegotiatedVersion,
-+ bgpPeerLocalAddr,
-+ bgpPeerLocalPort,
-+ bgpPeerRemoteAddr,
-+ bgpPeerRemotePort,
-+ bgpPeerRemoteAs,
-+ bgpPeerInUpdates,
-+ bgpPeerOutUpdates,
-+ bgpPeerInTotalMessages,
-+ bgpPeerOutTotalMessages,
-+ bgpPeerLastError,
-+ bgpPeerFsmEstablishedTransitions,
-+ bgpPeerFsmEstablishedTime,
-+ bgpPeerConnectRetryInterval,
-+ bgpPeerHoldTime,
-+ bgpPeerKeepAlive,
-+ bgpPeerHoldTimeConfigured,
-+ bgpPeerKeepAliveConfigured,
-+ bgpPeerMinASOriginationInterval,
-+ bgpPeerMinRouteAdvertisementInterval,
-+ bgpPeerInUpdateElapsedTime }
-+ STATUS current
-+ DESCRIPTION
-+ "A collection of objects for managing
-+ BGP peers."
-+ ::= { bgpMIBGroups 2 }
-+
-+ bgp4MIBRcvdPathAttrGroup OBJECT-GROUP
-+ OBJECTS { bgpPathAttrPeer,
-+ bgpPathAttrDestNetwork,
-+ bgpPathAttrOrigin,
-+ bgpPathAttrASPath,
-+ bgpPathAttrNextHop,
-+ bgpPathAttrInterASMetric }
-+ STATUS obsolete
-+ DESCRIPTION
-+ "A collection of objects for managing BGP
-+ path entries.
-+
-+ This conformance group is obsolete,
-+ replaced by bgp4MIBPathAttrGroup."
-+ ::= { bgpMIBGroups 3 }
-+
-+ bgp4MIBPathAttrGroup OBJECT-GROUP
-+ OBJECTS { bgp4PathAttrPeer,
-+ bgp4PathAttrIpAddrPrefixLen,
-+ bgp4PathAttrIpAddrPrefix,
-+ bgp4PathAttrOrigin,
-+ bgp4PathAttrASPathSegment,
-+ bgp4PathAttrNextHop,
-+ bgp4PathAttrMultiExitDisc,
-+ bgp4PathAttrLocalPref,
-+ bgp4PathAttrAtomicAggregate,
-+ bgp4PathAttrAggregatorAS,
-+ bgp4PathAttrAggregatorAddr,
-+ bgp4PathAttrCalcLocalPref,
-+ bgp4PathAttrBest,
-+ bgp4PathAttrUnknown }
-+ STATUS current
-+ DESCRIPTION
-+ "A collection of objects for managing
-+ BGP path entries."
-+ ::= { bgpMIBGroups 4 }
-+
-+ bgp4MIBNotificationGroup NOTIFICATION-GROUP
-+ NOTIFICATIONS { bgpEstablished,
-+ bgpBackwardTransition }
-+ STATUS current
-+ DESCRIPTION
-+ "A collection of notifications for signaling
-+ changes in BGP peer relationships."
-+ ::= { bgpMIBGroups 5 }
-+
-+ END
-diff -ruN net-snmp-5.4.1.orig/mibs/BRIDGE-MIB.txt net-snmp-5.4.1/mibs/BRIDGE-MIB.txt
---- net-snmp-5.4.1.orig/mibs/BRIDGE-MIB.txt 1970-01-01 01:00:00.000000000 +0100
-+++ net-snmp-5.4.1/mibs/BRIDGE-MIB.txt 2007-09-20 16:30:52.000000000 +0200
-@@ -0,0 +1,1075 @@
-+BRIDGE-MIB DEFINITIONS ::= BEGIN
-+
-+IMPORTS
-+ Counter, TimeTicks
-+ FROM RFC1155-SMI
-+ mib-2
-+ FROM RFC1213-MIB
-+ OBJECT-TYPE
-+ FROM RFC-1212
-+ TRAP-TYPE
-+ FROM RFC-1215;
-+
-+-- All representations of MAC addresses in this MIB Module
-+-- use, as a textual convention (i.e. this convention does
-+-- not affect their encoding), the data type:
-+MacAddress ::= OCTET STRING (SIZE (6)) -- a 6 octet address
-+ -- in the
-+ -- "canonical"
-+ -- order
-+-- defined by IEEE 802.1a, i.e., as if it were transmitted
-+-- least significant bit first, even though 802.5 (in
-+-- contrast to other n802.x protocols) requires MAC
-+-- addresses to be transmitted most significant bit first.
-+--
-+-- 16-bit addresses, if needed, are represented by setting
-+-- their upper 4 octets to all 0's, i.e., AAFF would be
-+-- represented as 00000000AAFF.
-+
-+-- Similarly, all representations of Bridge-Id in this MIB
-+-- Module use, as a textual convention (i.e. this
-+-- convention does not affect their encoding), the data
-+-- type:
-+BridgeId ::= OCTET STRING (SIZE (8)) -- the
-+ -- Bridge-Identifier
-+ -- as used in the
-+ -- Spanning Tree
-+-- Protocol to uniquely identify a bridge. Its first two
-+-- octets (in network byte order) contain a priority
-+-- value and its last 6 octets contain the MAC address
-+-- used to refer to a bridge in a unique fashion
-+-- (typically, the numerically smallest MAC address
-+-- of all ports on the bridge).
-+
-+-- Several objects in this MIB module represent values of
-+-- timers used by the Spanning Tree Protocol. In this
-+-- MIB, these timers have values in units of hundreths of
-+-- a second (i.e. 1/100 secs).
-+-- These timers, when stored in a Spanning Tree Protocol's
-+-- BPDU, are in units of 1/256 seconds. Note, however,
-+-- that 802.1D-1990 specifies a settable granularity of
-+-- no more than 1 second for these timers. To avoid
-+-- ambiguity, a data type is defined here as a textual
-+-- convention and all representation of these timers
-+-- in this MIB module are defined using this data type. An
-+-- algorithm is also defined for converting between the
-+-- different units, to ensure a timer's value is not
-+-- distorted by multiple conversions.
-+-- The data type is:
-+
-+Timeout ::= INTEGER -- a STP timer in units of 1/100 seconds
-+
-+-- To convert a Timeout value into a value in units of
-+-- 1/256 seconds, the following algorithm should be used:
-+--
-+-- b = floor( (n * 256) / 100)
-+--
-+-- where:
-+-- floor = quotient [ignore remainder]
-+-- n is the value in 1/100 second units
-+-- b is the value in 1/256 second units
-+--
-+-- To convert the value from 1/256 second units back to
-+-- 1/100 seconds, the following algorithm should be used:
-+--
-+-- n = ceiling( (b * 100) / 256)
-+--
-+-- where:
-+-- ceiling = quotient [if remainder is 0], or
-+-- quotient + 1 [if remainder is non-zero]
-+-- n is the value in 1/100 second units
-+-- b is the value in 1/256 second units
-+--
-+-- Note: it is important that the arithmetic operations are
-+-- done in the order specified (i.e., multiply first, divide
-+-- second).
-+
-+ dot1dBridge OBJECT IDENTIFIER ::= { mib-2 17 }
-+
-+-- groups in the Bridge MIB
-+
-+dot1dBase OBJECT IDENTIFIER ::= { dot1dBridge 1 }
-+
-+dot1dStp OBJECT IDENTIFIER ::= { dot1dBridge 2 }
-+
-+dot1dSr OBJECT IDENTIFIER ::= { dot1dBridge 3 }
-+-- separately documented
-+
-+dot1dTp OBJECT IDENTIFIER ::= { dot1dBridge 4 }
-+
-+dot1dStatic OBJECT IDENTIFIER ::= { dot1dBridge 5 }
-+
-+-- the dot1dBase group
-+
-+-- Implementation of the dot1dBase group is mandatory for all
-+-- bridges.
-+
-+dot1dBaseBridgeAddress OBJECT-TYPE
-+ SYNTAX MacAddress
-+ ACCESS read-only
-+ STATUS mandatory
-+ DESCRIPTION
-+ "The MAC address used by this bridge when it must
-+ be referred to in a unique fashion. It is
-+ recommended that this be the numerically smallest
-+ MAC address of all ports that belong to this
-+ bridge. However it is only required to be unique.
-+ When concatenated with dot1dStpPriority a unique
-+ BridgeIdentifier is formed which is used in the
-+ Spanning Tree Protocol."
-+ REFERENCE
-+ "IEEE 802.1D-1990: Sections 6.4.1.1.3 and 3.12.5"
-+ ::= { dot1dBase 1 }
-+
-+dot1dBaseNumPorts OBJECT-TYPE
-+ SYNTAX INTEGER
-+ ACCESS read-only
-+ STATUS mandatory
-+ DESCRIPTION
-+ "The number of ports controlled by this bridging
-+ entity."
-+ REFERENCE
-+ "IEEE 802.1D-1990: Section 6.4.1.1.3"
-+ ::= { dot1dBase 2 }
-+
-+dot1dBaseType OBJECT-TYPE
-+ SYNTAX INTEGER {
-+ unknown(1),
-+ transparent-only(2),
-+ sourceroute-only(3),
-+ srt(4)
-+ }
-+ ACCESS read-only
-+ STATUS mandatory
-+ DESCRIPTION
-+ "Indicates what type of bridging this bridge can
-+ perform. If a bridge is actually performing a
-+ certain type of bridging this will be indicated by
-+ entries in the port table for the given type."
-+ ::= { dot1dBase 3 }
-+
-+-- The Generic Bridge Port Table
-+
-+dot1dBasePortTable OBJECT-TYPE
-+ SYNTAX SEQUENCE OF Dot1dBasePortEntry
-+ ACCESS not-accessible
-+ STATUS mandatory
-+ DESCRIPTION
-+ "A table that contains generic information about
-+ every port that is associated with this bridge.
-+ Transparent, source-route, and srt ports are
-+ included."
-+ ::= { dot1dBase 4 }
-+
-+dot1dBasePortEntry OBJECT-TYPE
-+ SYNTAX Dot1dBasePortEntry
-+ ACCESS not-accessible
-+ STATUS mandatory
-+ DESCRIPTION
-+ "A list of information for each port of the
-+ bridge."
-+ REFERENCE
-+ "IEEE 802.1D-1990: Section 6.4.2, 6.6.1"
-+ INDEX { dot1dBasePort }
-+ ::= { dot1dBasePortTable 1 }
-+
-+Dot1dBasePortEntry ::=
-+ SEQUENCE {
-+ dot1dBasePort
-+ INTEGER,
-+ dot1dBasePortIfIndex
-+ INTEGER,
-+ dot1dBasePortCircuit
-+
-+ OBJECT IDENTIFIER,
-+ dot1dBasePortDelayExceededDiscards
-+ Counter,
-+ dot1dBasePortMtuExceededDiscards
-+ Counter
-+ }
-+
-+dot1dBasePort OBJECT-TYPE
-+ SYNTAX INTEGER (1..65535)
-+ ACCESS read-only
-+ STATUS mandatory
-+ DESCRIPTION
-+ "The port number of the port for which this entry
-+ contains bridge management information."
-+ ::= { dot1dBasePortEntry 1 }
-+
-+dot1dBasePortIfIndex OBJECT-TYPE
-+ SYNTAX INTEGER
-+ ACCESS read-only
-+ STATUS mandatory
-+ DESCRIPTION
-+ "The value of the instance of the ifIndex object,
-+ defined in MIB-II, for the interface corresponding
-+ to this port."
-+ ::= { dot1dBasePortEntry 2 }
-+
-+dot1dBasePortCircuit OBJECT-TYPE
-+ SYNTAX OBJECT IDENTIFIER
-+ ACCESS read-only
-+ STATUS mandatory
-+ DESCRIPTION
-+ "For a port which (potentially) has the same value
-+ of dot1dBasePortIfIndex as another port on the
-+ same bridge, this object contains the name of an
-+ object instance unique to this port. For example,
-+ in the case where multiple ports correspond one-
-+ to-one with multiple X.25 virtual circuits, this
-+ value might identify an (e.g., the first) object
-+ instance associated with the X.25 virtual circuit
-+ corresponding to this port.
-+
-+ For a port which has a unique value of
-+ dot1dBasePortIfIndex, this object can have the
-+ value { 0 0 }."
-+ ::= { dot1dBasePortEntry 3 }
-+
-+dot1dBasePortDelayExceededDiscards OBJECT-TYPE
-+ SYNTAX Counter
-+
-+ ACCESS read-only
-+ STATUS mandatory
-+ DESCRIPTION
-+ "The number of frames discarded by this port due
-+ to excessive transit delay through the bridge. It
-+ is incremented by both transparent and source
-+ route bridges."
-+ REFERENCE
-+ "IEEE 802.1D-1990: Section 6.6.1.1.3"
-+ ::= { dot1dBasePortEntry 4 }
-+
-+dot1dBasePortMtuExceededDiscards OBJECT-TYPE
-+ SYNTAX Counter
-+ ACCESS read-only
-+ STATUS mandatory
-+ DESCRIPTION
-+ "The number of frames discarded by this port due
-+ to an excessive size. It is incremented by both
-+ transparent and source route bridges."
-+ REFERENCE
-+ "IEEE 802.1D-1990: Section 6.6.1.1.3"
-+ ::= { dot1dBasePortEntry 5 }
-+
-+-- the dot1dStp group
-+
-+-- Implementation of the dot1dStp group is optional. It is
-+-- implemented by those bridges that support the Spanning Tree
-+-- Protocol.
-+
-+dot1dStpProtocolSpecification OBJECT-TYPE
-+ SYNTAX INTEGER {
-+ unknown(1),
-+ decLb100(2),
-+ ieee8021d(3)
-+ }
-+ ACCESS read-only
-+ STATUS mandatory
-+ DESCRIPTION
-+ "An indication of what version of the Spanning
-+ Tree Protocol is being run. The value
-+ 'decLb100(2)' indicates the DEC LANbridge 100
-+ Spanning Tree protocol. IEEE 802.1d
-+ implementations will return 'ieee8021d(3)'. If
-+ future versions of the IEEE Spanning Tree Protocol
-+ are released that are incompatible with the
-+ current version a new value will be defined."
-+
-+ ::= { dot1dStp 1 }
-+
-+dot1dStpPriority OBJECT-TYPE
-+ SYNTAX INTEGER (0..65535)
-+ ACCESS read-write
-+ STATUS mandatory
-+ DESCRIPTION
-+ "The value of the write-able portion of the Bridge
-+ ID, i.e., the first two octets of the (8 octet
-+ long) Bridge ID. The other (last) 6 octets of the
-+ Bridge ID are given by the value of
-+ dot1dBaseBridgeAddress."
-+ REFERENCE
-+ "IEEE 802.1D-1990: Section 4.5.3.7"
-+ ::= { dot1dStp 2 }
-+
-+dot1dStpTimeSinceTopologyChange OBJECT-TYPE
-+ SYNTAX TimeTicks
-+ ACCESS read-only
-+ STATUS mandatory
-+ DESCRIPTION
-+ "The time (in hundredths of a second) since the
-+ last time a topology change was detected by the
-+ bridge entity."
-+ REFERENCE
-+ "IEEE 802.1D-1990: Section 6.8.1.1.3"
-+ ::= { dot1dStp 3 }
-+
-+dot1dStpTopChanges OBJECT-TYPE
-+ SYNTAX Counter
-+ ACCESS read-only
-+ STATUS mandatory
-+ DESCRIPTION
-+ "The total number of topology changes detected by
-+ this bridge since the management entity was last
-+ reset or initialized."
-+ REFERENCE
-+ "IEEE 802.1D-1990: Section 6.8.1.1.3"
-+ ::= { dot1dStp 4 }
-+
-+dot1dStpDesignatedRoot OBJECT-TYPE
-+ SYNTAX BridgeId
-+ ACCESS read-only
-+ STATUS mandatory
-+ DESCRIPTION
-+ "The bridge identifier of the root of the spanning
-+ tree as determined by the Spanning Tree Protocol
-+ as executed by this node. This value is used as
-+
-+ the Root Identifier parameter in all Configuration
-+ Bridge PDUs originated by this node."
-+ REFERENCE
-+ "IEEE 802.1D-1990: Section 4.5.3.1"
-+ ::= { dot1dStp 5 }
-+
-+dot1dStpRootCost OBJECT-TYPE
-+ SYNTAX INTEGER
-+ ACCESS read-only
-+ STATUS mandatory
-+ DESCRIPTION
-+ "The cost of the path to the root as seen from
-+ this bridge."
-+ REFERENCE
-+ "IEEE 802.1D-1990: Section 4.5.3.2"
-+ ::= { dot1dStp 6 }
-+
-+dot1dStpRootPort OBJECT-TYPE
-+ SYNTAX INTEGER
-+ ACCESS read-only
-+ STATUS mandatory
-+ DESCRIPTION
-+ "The port number of the port which offers the
-+ lowest cost path from this bridge to the root
-+ bridge."
-+ REFERENCE
-+ "IEEE 802.1D-1990: Section 4.5.3.3"
-+ ::= { dot1dStp 7 }
-+
-+dot1dStpMaxAge OBJECT-TYPE
-+ SYNTAX Timeout
-+ ACCESS read-only
-+ STATUS mandatory
-+ DESCRIPTION
-+ "The maximum age of Spanning Tree Protocol
-+ information learned from the network on any port
-+ before it is discarded, in units of hundredths of
-+ a second. This is the actual value that this
-+ bridge is currently using."
-+ REFERENCE
-+ "IEEE 802.1D-1990: Section 4.5.3.4"
-+ ::= { dot1dStp 8 }
-+
-+dot1dStpHelloTime OBJECT-TYPE
-+ SYNTAX Timeout
-+ ACCESS read-only
-+ STATUS mandatory
-+ DESCRIPTION
-+
-+ "The amount of time between the transmission of
-+ Configuration bridge PDUs by this node on any port
-+ when it is the root of the spanning tree or trying
-+ to become so, in units of hundredths of a second.
-+ This is the actual value that this bridge is
-+ currently using."
-+ REFERENCE
-+ "IEEE 802.1D-1990: Section 4.5.3.5"
-+ ::= { dot1dStp 9 }
-+
-+dot1dStpHoldTime OBJECT-TYPE
-+ SYNTAX INTEGER
-+ ACCESS read-only
-+ STATUS mandatory
-+ DESCRIPTION
-+ "This time value determines the interval length
-+ during which no more than two Configuration bridge
-+ PDUs shall be transmitted by this node, in units
-+ of hundredths of a second."
-+ REFERENCE
-+ "IEEE 802.1D-1990: Section 4.5.3.14"
-+ ::= { dot1dStp 10 }
-+
-+dot1dStpForwardDelay OBJECT-TYPE
-+ SYNTAX Timeout
-+ ACCESS read-only
-+ STATUS mandatory
-+ DESCRIPTION
-+ "This time value, measured in units of hundredths
-+ of a second, controls how fast a port changes its
-+ spanning state when moving towards the Forwarding
-+ state. The value determines how long the port
-+ stays in each of the Listening and Learning
-+ states, which precede the Forwarding state. This
-+ value is also used, when a topology change has
-+ been detected and is underway, to age all dynamic
-+ entries in the Forwarding Database. [Note that
-+ this value is the one that this bridge is
-+ currently using, in contrast to
-+ dot1dStpBridgeForwardDelay which is the value that
-+ this bridge and all others would start using
-+ if/when this bridge were to become the root.]"
-+ REFERENCE
-+ "IEEE 802.1D-1990: Section 4.5.3.6"
-+ ::= { dot1dStp 11 }
-+
-+dot1dStpBridgeMaxAge OBJECT-TYPE
-+ SYNTAX Timeout (600..4000)
-+
-+ ACCESS read-write
-+ STATUS mandatory
-+ DESCRIPTION
-+ "The value that all bridges use for MaxAge when
-+ this bridge is acting as the root. Note that
-+ 802.1D-1990 specifies that the range for this
-+ parameter is related to the value of
-+ dot1dStpBridgeHelloTime. The granularity of this
-+ timer is specified by 802.1D-1990 to be 1 second.
-+ An agent may return a badValue error if a set is
-+ attempted to a value which is not a whole number
-+ of seconds."
-+ REFERENCE
-+ "IEEE 802.1D-1990: Section 4.5.3.8"
-+ ::= { dot1dStp 12 }
-+
-+dot1dStpBridgeHelloTime OBJECT-TYPE
-+ SYNTAX Timeout (100..1000)
-+ ACCESS read-write
-+ STATUS mandatory
-+ DESCRIPTION
-+ "The value that all bridges use for HelloTime when
-+ this bridge is acting as the root. The
-+ granularity of this timer is specified by 802.1D-
-+ 1990 to be 1 second. An agent may return a
-+ badValue error if a set is attempted to a value
-+ which is not a whole number of seconds."
-+ REFERENCE
-+ "IEEE 802.1D-1990: Section 4.5.3.9"
-+ ::= { dot1dStp 13 }
-+
-+dot1dStpBridgeForwardDelay OBJECT-TYPE
-+ SYNTAX Timeout (400..3000)
-+ ACCESS read-write
-+ STATUS mandatory
-+ DESCRIPTION
-+ "The value that all bridges use for ForwardDelay
-+ when this bridge is acting as the root. Note that
-+ 802.1D-1990 specifies that the range for this
-+ parameter is related to the value of
-+ dot1dStpBridgeMaxAge. The granularity of this
-+ timer is specified by 802.1D-1990 to be 1 second.
-+ An agent may return a badValue error if a set is
-+ attempted to a value which is not a whole number
-+ of seconds."
-+ REFERENCE
-+ "IEEE 802.1D-1990: Section 4.5.3.10"
-+ ::= { dot1dStp 14 }
-+
-+-- The Spanning Tree Port Table
-+
-+dot1dStpPortTable OBJECT-TYPE
-+ SYNTAX SEQUENCE OF Dot1dStpPortEntry
-+ ACCESS not-accessible
-+ STATUS mandatory
-+ DESCRIPTION
-+ "A table that contains port-specific information
-+ for the Spanning Tree Protocol."
-+ ::= { dot1dStp 15 }
-+
-+dot1dStpPortEntry OBJECT-TYPE
-+ SYNTAX Dot1dStpPortEntry
-+ ACCESS not-accessible
-+ STATUS mandatory
-+ DESCRIPTION
-+ "A list of information maintained by every port
-+ about the Spanning Tree Protocol state for that
-+ port."
-+ INDEX { dot1dStpPort }
-+ ::= { dot1dStpPortTable 1 }
-+
-+Dot1dStpPortEntry ::=
-+ SEQUENCE {
-+ dot1dStpPort
-+ INTEGER,
-+ dot1dStpPortPriority
-+ INTEGER,
-+ dot1dStpPortState
-+ INTEGER,
-+ dot1dStpPortEnable
-+ INTEGER,
-+ dot1dStpPortPathCost
-+ INTEGER,
-+ dot1dStpPortDesignatedRoot
-+ BridgeId,
-+ dot1dStpPortDesignatedCost
-+ INTEGER,
-+ dot1dStpPortDesignatedBridge
-+ BridgeId,
-+ dot1dStpPortDesignatedPort
-+ OCTET STRING,
-+ dot1dStpPortForwardTransitions
-+ Counter
-+ }
-+
-+dot1dStpPort OBJECT-TYPE
-+ SYNTAX INTEGER (1..65535)
-+
-+ ACCESS read-only
-+ STATUS mandatory
-+ DESCRIPTION
-+ "The port number of the port for which this entry
-+ contains Spanning Tree Protocol management
-+ information."
-+ REFERENCE
-+ "IEEE 802.1D-1990: Section 6.8.2.1.2"
-+ ::= { dot1dStpPortEntry 1 }
-+
-+dot1dStpPortPriority OBJECT-TYPE
-+ SYNTAX INTEGER (0..255)
-+ ACCESS read-write
-+ STATUS mandatory
-+ DESCRIPTION
-+ "The value of the priority field which is
-+ contained in the first (in network byte order)
-+ octet of the (2 octet long) Port ID. The other
-+ octet of the Port ID is given by the value of
-+ dot1dStpPort."
-+ REFERENCE
-+ "IEEE 802.1D-1990: Section 4.5.5.1"
-+ ::= { dot1dStpPortEntry 2 }
-+
-+dot1dStpPortState OBJECT-TYPE
-+ SYNTAX INTEGER {
-+ disabled(1),
-+ blocking(2),
-+ listening(3),
-+ learning(4),
-+ forwarding(5),
-+ broken(6)
-+ }
-+ ACCESS read-only
-+ STATUS mandatory
-+ DESCRIPTION
-+ "The port's current state as defined by
-+ application of the Spanning Tree Protocol. This
-+ state controls what action a port takes on
-+ reception of a frame. If the bridge has detected
-+ a port that is malfunctioning it will place that
-+ port into the broken(6) state. For ports which
-+ are disabled (see dot1dStpPortEnable), this object
-+ will have a value of disabled(1)."
-+ REFERENCE
-+ "IEEE 802.1D-1990: Section 4.5.5.2"
-+ ::= { dot1dStpPortEntry 3 }
-+
-+dot1dStpPortEnable OBJECT-TYPE
-+ SYNTAX INTEGER {
-+ enabled(1),
-+ disabled(2)
-+ }
-+ ACCESS read-write
-+ STATUS mandatory
-+ DESCRIPTION
-+ "The enabled/disabled status of the port."
-+ REFERENCE
-+ "IEEE 802.1D-1990: Section 4.5.5.2"
-+ ::= { dot1dStpPortEntry 4 }
-+
-+dot1dStpPortPathCost OBJECT-TYPE
-+ SYNTAX INTEGER (1..65535)
-+ ACCESS read-write
-+ STATUS mandatory
-+ DESCRIPTION
-+ "The contribution of this port to the path cost of
-+ paths towards the spanning tree root which include
-+ this port. 802.1D-1990 recommends that the
-+ default value of this parameter be in inverse
-+ proportion to the speed of the attached LAN."
-+ REFERENCE
-+ "IEEE 802.1D-1990: Section 4.5.5.3"
-+ ::= { dot1dStpPortEntry 5 }
-+
-+dot1dStpPortDesignatedRoot OBJECT-TYPE
-+ SYNTAX BridgeId
-+ ACCESS read-only
-+ STATUS mandatory
-+ DESCRIPTION
-+ "The unique Bridge Identifier of the Bridge
-+ recorded as the Root in the Configuration BPDUs
-+ transmitted by the Designated Bridge for the
-+ segment to which the port is attached."
-+ REFERENCE
-+ "IEEE 802.1D-1990: Section 4.5.5.4"
-+ ::= { dot1dStpPortEntry 6 }
-+
-+dot1dStpPortDesignatedCost OBJECT-TYPE
-+ SYNTAX INTEGER
-+ ACCESS read-only
-+ STATUS mandatory
-+ DESCRIPTION
-+ "The path cost of the Designated Port of the
-+ segment connected to this port. This value is
-+ compared to the Root Path Cost field in received
-+
-+ bridge PDUs."
-+ REFERENCE
-+ "IEEE 802.1D-1990: Section 4.5.5.5"
-+ ::= { dot1dStpPortEntry 7 }
-+
-+dot1dStpPortDesignatedBridge OBJECT-TYPE
-+ SYNTAX BridgeId
-+ ACCESS read-only
-+ STATUS mandatory
-+ DESCRIPTION
-+ "The Bridge Identifier of the bridge which this
-+ port considers to be the Designated Bridge for
-+ this port's segment."
-+ REFERENCE
-+ "IEEE 802.1D-1990: Section 4.5.5.6"
-+ ::= { dot1dStpPortEntry 8 }
-+
-+dot1dStpPortDesignatedPort OBJECT-TYPE
-+ SYNTAX OCTET STRING (SIZE (2))
-+ ACCESS read-only
-+ STATUS mandatory
-+ DESCRIPTION
-+ "The Port Identifier of the port on the Designated
-+ Bridge for this port's segment."
-+ REFERENCE
-+ "IEEE 802.1D-1990: Section 4.5.5.7"
-+ ::= { dot1dStpPortEntry 9 }
-+
-+dot1dStpPortForwardTransitions OBJECT-TYPE
-+ SYNTAX Counter
-+ ACCESS read-only
-+ STATUS mandatory
-+ DESCRIPTION
-+ "The number of times this port has transitioned
-+ from the Learning state to the Forwarding state."
-+ ::= { dot1dStpPortEntry 10 }
-+
-+-- the dot1dTp group
-+
-+-- Implementation of the dot1dTp group is optional. It is
-+-- implemented by those bridges that support the transparent
-+-- bridging mode. A transparent or SRT bridge will implement
-+-- this group.
-+
-+dot1dTpLearnedEntryDiscards OBJECT-TYPE
-+ SYNTAX Counter
-+
-+ ACCESS read-only
-+ STATUS mandatory
-+ DESCRIPTION
-+ "The total number of Forwarding Database entries,
-+ which have been or would have been learnt, but
-+ have been discarded due to a lack of space to
-+ store them in the Forwarding Database. If this
-+ counter is increasing, it indicates that the
-+ Forwarding Database is regularly becoming full (a
-+ condition which has unpleasant performance effects
-+ on the subnetwork). If this counter has a
-+ significant value but is not presently increasing,
-+ it indicates that the problem has been occurring
-+ but is not persistent."
-+ REFERENCE
-+ "IEEE 802.1D-1990: Section 6.7.1.1.3"
-+ ::= { dot1dTp 1 }
-+
-+dot1dTpAgingTime OBJECT-TYPE
-+ SYNTAX INTEGER (10..1000000)
-+ ACCESS read-write
-+ STATUS mandatory
-+ DESCRIPTION
-+ "The timeout period in seconds for aging out
-+ dynamically learned forwarding information.
-+ 802.1D-1990 recommends a default of 300 seconds."
-+ REFERENCE
-+ "IEEE 802.1D-1990: Section 6.7.1.1.3"
-+ ::= { dot1dTp 2 }
-+
-+-- The Forwarding Database for Transparent Bridges
-+
-+dot1dTpFdbTable OBJECT-TYPE
-+ SYNTAX SEQUENCE OF Dot1dTpFdbEntry
-+ ACCESS not-accessible
-+ STATUS mandatory
-+ DESCRIPTION
-+ "A table that contains information about unicast
-+ entries for which the bridge has forwarding and/or
-+ filtering information. This information is used
-+ by the transparent bridging function in
-+ determining how to propagate a received frame."
-+ ::= { dot1dTp 3 }
-+
-+dot1dTpFdbEntry OBJECT-TYPE
-+ SYNTAX Dot1dTpFdbEntry
-+ ACCESS not-accessible
-+ STATUS mandatory
-+ DESCRIPTION
-+ "Information about a specific unicast MAC address
-+ for which the bridge has some forwarding and/or
-+ filtering information."
-+ INDEX { dot1dTpFdbAddress }
-+ ::= { dot1dTpFdbTable 1 }
-+
-+Dot1dTpFdbEntry ::=
-+ SEQUENCE {
-+ dot1dTpFdbAddress
-+ MacAddress,
-+ dot1dTpFdbPort
-+ INTEGER,
-+ dot1dTpFdbStatus
-+ INTEGER
-+ }
-+
-+dot1dTpFdbAddress OBJECT-TYPE
-+ SYNTAX MacAddress
-+ ACCESS read-only
-+ STATUS mandatory
-+ DESCRIPTION
-+ "A unicast MAC address for which the bridge has
-+ forwarding and/or filtering information."
-+ REFERENCE
-+ "IEEE 802.1D-1990: Section 3.9.1, 3.9.2"
-+ ::= { dot1dTpFdbEntry 1 }
-+
-+dot1dTpFdbPort OBJECT-TYPE
-+ SYNTAX INTEGER
-+ ACCESS read-only
-+ STATUS mandatory
-+ DESCRIPTION
-+ "Either the value '0', or the port number of the
-+ port on which a frame having a source address
-+ equal to the value of the corresponding instance
-+ of dot1dTpFdbAddress has been seen. A value of
-+ '0' indicates that the port number has not been
-+ learned but that the bridge does have some
-+ forwarding/filtering information about this
-+ address (e.g. in the dot1dStaticTable).
-+ Implementors are encouraged to assign the port
-+ value to this object whenever it is learned even
-+ for addresses for which the corresponding value of
-+ dot1dTpFdbStatus is not learned(3)."
-+ ::= { dot1dTpFdbEntry 2 }
-+
-+dot1dTpFdbStatus OBJECT-TYPE
-+ SYNTAX INTEGER {
-+ other(1),
-+ invalid(2),
-+ learned(3),
-+ self(4),
-+ mgmt(5)
-+ }
-+ ACCESS read-only
-+ STATUS mandatory
-+ DESCRIPTION
-+ "The status of this entry. The meanings of the
-+ values are:
-+ other(1) : none of the following. This would
-+ include the case where some other
-+ MIB object (not the corresponding
-+ instance of dot1dTpFdbPort, nor an
-+ entry in the dot1dStaticTable) is
-+ being used to determine if and how
-+ frames addressed to the value of
-+ the corresponding instance of
-+ dot1dTpFdbAddress are being
-+ forwarded.
-+ invalid(2) : this entry is not longer valid
-+ (e.g., it was learned but has since
-+ aged-out), but has not yet been
-+ flushed from the table.
-+ learned(3) : the value of the corresponding
-+ instance of dot1dTpFdbPort was
-+ learned, and is being used.
-+ self(4) : the value of the corresponding
-+ instance of dot1dTpFdbAddress
-+ represents one of the bridge's
-+ addresses. The corresponding
-+ instance of dot1dTpFdbPort
-+ indicates which of the bridge's
-+ ports has this address.
-+ mgmt(5) : the value of the corresponding
-+ instance of dot1dTpFdbAddress is
-+ also the value of an existing
-+ instance of dot1dStaticAddress."
-+ ::= { dot1dTpFdbEntry 3 }
-+
-+-- Port Table for Transparent Bridges
-+
-+dot1dTpPortTable OBJECT-TYPE
-+ SYNTAX SEQUENCE OF Dot1dTpPortEntry
-+ ACCESS not-accessible
-+ STATUS mandatory
-+ DESCRIPTION
-+ "A table that contains information about every
-+ port that is associated with this transparent
-+ bridge."
-+ ::= { dot1dTp 4 }
-+
-+dot1dTpPortEntry OBJECT-TYPE
-+ SYNTAX Dot1dTpPortEntry
-+ ACCESS not-accessible
-+ STATUS mandatory
-+ DESCRIPTION
-+ "A list of information for each port of a
-+ transparent bridge."
-+ INDEX { dot1dTpPort }
-+ ::= { dot1dTpPortTable 1 }
-+
-+Dot1dTpPortEntry ::=
-+ SEQUENCE {
-+ dot1dTpPort
-+ INTEGER,
-+ dot1dTpPortMaxInfo
-+ INTEGER,
-+ dot1dTpPortInFrames
-+ Counter,
-+ dot1dTpPortOutFrames
-+ Counter,
-+ dot1dTpPortInDiscards
-+ Counter
-+ }
-+
-+dot1dTpPort OBJECT-TYPE
-+ SYNTAX INTEGER (1..65535)
-+ ACCESS read-only
-+ STATUS mandatory
-+ DESCRIPTION
-+ "The port number of the port for which this entry
-+ contains Transparent bridging management
-+ information."
-+ ::= { dot1dTpPortEntry 1 }
-+
-+-- It would be nice if we could use ifMtu as the size of the
-+-- largest INFO field, but we can't because ifMtu is defined
-+-- to be the size that the (inter-)network layer can use which
-+-- can differ from the MAC layer (especially if several layers
-+-- of encapsulation are used).
-+
-+dot1dTpPortMaxInfo OBJECT-TYPE
-+ SYNTAX INTEGER
-+ ACCESS read-only
-+ STATUS mandatory
-+ DESCRIPTION
-+ "The maximum size of the INFO (non-MAC) field that
-+ this port will receive or transmit."
-+ ::= { dot1dTpPortEntry 2 }
-+
-+dot1dTpPortInFrames OBJECT-TYPE
-+ SYNTAX Counter
-+ ACCESS read-only
-+ STATUS mandatory
-+ DESCRIPTION
-+ "The number of frames that have been received by
-+ this port from its segment. Note that a frame
-+ received on the interface corresponding to this
-+ port is only counted by this object if and only if
-+ it is for a protocol being processed by the local
-+ bridging function, including bridge management
-+ frames."
-+ REFERENCE
-+ "IEEE 802.1D-1990: Section 6.6.1.1.3"
-+ ::= { dot1dTpPortEntry 3 }
-+
-+dot1dTpPortOutFrames OBJECT-TYPE
-+ SYNTAX Counter
-+ ACCESS read-only
-+ STATUS mandatory
-+ DESCRIPTION
-+ "The number of frames that have been transmitted
-+ by this port to its segment. Note that a frame
-+ transmitted on the interface corresponding to this
-+ port is only counted by this object if and only if
-+ it is for a protocol being processed by the local
-+ bridging function, including bridge management
-+ frames."
-+ REFERENCE
-+ "IEEE 802.1D-1990: Section 6.6.1.1.3"
-+ ::= { dot1dTpPortEntry 4 }
-+
-+dot1dTpPortInDiscards OBJECT-TYPE
-+ SYNTAX Counter
-+ ACCESS read-only
-+ STATUS mandatory
-+ DESCRIPTION
-+ "Count of valid frames received which were
-+ discarded (i.e., filtered) by the Forwarding
-+ Process."
-+ REFERENCE
-+ "IEEE 802.1D-1990: Section 6.6.1.1.3"
-+ ::= { dot1dTpPortEntry 5 }
-+-- The Static (Destination-Address Filtering) Database
-+
-+-- Implementation of this group is optional.
-+
-+dot1dStaticTable OBJECT-TYPE
-+ SYNTAX SEQUENCE OF Dot1dStaticEntry
-+ ACCESS not-accessible
-+ STATUS mandatory
-+ DESCRIPTION
-+ "A table containing filtering information
-+ configured into the bridge by (local or network)
-+ management specifying the set of ports to which
-+ frames received from specific ports and containing
-+ specific destination addresses are allowed to be
-+ forwarded. The value of zero in this table as the
-+ port number from which frames with a specific
-+ destination address are received, is used to
-+ specify all ports for which there is no specific
-+ entry in this table for that particular
-+ destination address. Entries are valid for
-+ unicast and for group/broadcast addresses."
-+ REFERENCE
-+ "IEEE 802.1D-1990: Section 6.7.2"
-+ ::= { dot1dStatic 1 }
-+
-+dot1dStaticEntry OBJECT-TYPE
-+ SYNTAX Dot1dStaticEntry
-+ ACCESS not-accessible
-+ STATUS mandatory
-+ DESCRIPTION
-+ "Filtering information configured into the bridge
-+ by (local or network) management specifying the
-+ set of ports to which frames received from a
-+ specific port and containing a specific
-+ destination address are allowed to be forwarded."
-+ REFERENCE
-+ "IEEE 802.1D-1990: Section 6.7.2"
-+ INDEX { dot1dStaticAddress, dot1dStaticReceivePort }
-+ ::= { dot1dStaticTable 1 }
-+
-+Dot1dStaticEntry ::=
-+ SEQUENCE {
-+ dot1dStaticAddress
-+ MacAddress,
-+ dot1dStaticReceivePort
-+ INTEGER,
-+ dot1dStaticAllowedToGoTo
-+ OCTET STRING,
-+ dot1dStaticStatus
-+ INTEGER
-+ }
-+
-+dot1dStaticAddress OBJECT-TYPE
-+ SYNTAX MacAddress
-+ ACCESS read-write
-+ STATUS mandatory
-+ DESCRIPTION
-+ "The destination MAC address in a frame to which
-+ this entry's filtering information applies. This
-+ object can take the value of a unicast address, a
-+ group address or the broadcast address."
-+ REFERENCE
-+ "IEEE 802.1D-1990: Section 3.9.1, 3.9.2"
-+ ::= { dot1dStaticEntry 1 }
-+
-+dot1dStaticReceivePort OBJECT-TYPE
-+ SYNTAX INTEGER
-+ ACCESS read-write
-+ STATUS mandatory
-+ DESCRIPTION
-+ "Either the value '0', or the port number of the
-+ port from which a frame must be received in order
-+ for this entry's filtering information to apply.
-+ A value of zero indicates that this entry applies
-+ on all ports of the bridge for which there is no
-+ other applicable entry."
-+ ::= { dot1dStaticEntry 2 }
-+
-+dot1dStaticAllowedToGoTo OBJECT-TYPE
-+ SYNTAX OCTET STRING
-+ ACCESS read-write
-+ STATUS mandatory
-+ DESCRIPTION
-+ "The set of ports to which frames received from a
-+ specific port and destined for a specific MAC
-+
-+ address, are allowed to be forwarded. Each octet
-+ within the value of this object specifies a set of
-+ eight ports, with the first octet specifying ports
-+ 1 through 8, the second octet specifying ports 9
-+ through 16, etc. Within each octet, the most
-+ significant bit represents the lowest numbered
-+ port, and the least significant bit represents the
-+ highest numbered port. Thus, each port of the
-+ bridge is represented by a single bit within the
-+ value of this object. If that bit has a value of
-+ '1' then that port is included in the set of
-+ ports; the port is not included if its bit has a
-+ value of '0'. (Note that the setting of the bit
-+ corresponding to the port from which a frame is
-+ received is irrelevant.) The default value of
-+ this object is a string of ones of appropriate
-+ length."
-+ ::= { dot1dStaticEntry 3 }
-+
-+dot1dStaticStatus OBJECT-TYPE
-+ SYNTAX INTEGER {
-+ other(1),
-+ invalid(2),
-+ permanent(3),
-+ deleteOnReset(4),
-+ deleteOnTimeout(5)
-+ }
-+ ACCESS read-write
-+ STATUS mandatory
-+ DESCRIPTION
-+ "This object indicates the status of this entry.
-+ The default value is permanent(3).
-+ other(1) - this entry is currently in use but
-+ the conditions under which it will
-+ remain so are different from each of the
-+ following values.
-+ invalid(2) - writing this value to the object
-+ removes the corresponding entry.
-+ permanent(3) - this entry is currently in use
-+ and will remain so after the next reset
-+ of the bridge.
-+ deleteOnReset(4) - this entry is currently in
-+ use and will remain so until the next
-+ reset of the bridge.
-+ deleteOnTimeout(5) - this entry is currently
-+ in use and will remain so until it is
-+ aged out."
-+
-+ ::= { dot1dStaticEntry 4 }
-+
-+-- Traps for use by Bridges
-+
-+-- Traps for the Spanning Tree Protocol
-+
-+newRoot TRAP-TYPE
-+ ENTERPRISE dot1dBridge
-+ DESCRIPTION
-+ "The newRoot trap indicates that the sending agent
-+ has become the new root of the Spanning Tree; the
-+ trap is sent by a bridge soon after its election
-+ as the new root, e.g., upon expiration of the
-+ Topology Change Timer immediately subsequent to
-+ its election. Implementation of this trap is
-+ optional."
-+ ::= 1
-+
-+topologyChange TRAP-TYPE
-+ ENTERPRISE dot1dBridge
-+ DESCRIPTION
-+ "A topologyChange trap is sent by a bridge when
-+ any of its configured ports transitions from the
-+ Learning state to the Forwarding state, or from
-+ the Forwarding state to the Blocking state. The
-+ trap is not sent if a newRoot trap is sent for the
-+ same transition. Implementation of this trap is
-+ optional."
-+ ::= 2
-+
-+END
diff -ruN net-snmp-5.4.1.orig/mibs/GNOME-SMI.txt net-snmp-5.4.1/mibs/GNOME-SMI.txt
--- net-snmp-5.4.1.orig/mibs/GNOME-SMI.txt 1970-01-01 01:00:00.000000000 +0100
+++ net-snmp-5.4.1/mibs/GNOME-SMI.txt 2007-09-20 16:33:55.000000000 +0200
@@ -2102,4167 +90,3 @@
+-- more to come if necessary.
+
+END
-diff -ruN net-snmp-5.4.1.orig/mibs/OSPF-MIB.txt net-snmp-5.4.1/mibs/OSPF-MIB.txt
---- net-snmp-5.4.1.orig/mibs/OSPF-MIB.txt 1970-01-01 01:00:00.000000000 +0100
-+++ net-snmp-5.4.1/mibs/OSPF-MIB.txt 2007-09-20 16:30:52.000000000 +0200
-@@ -0,0 +1,2723 @@
-+OSPF-MIB DEFINITIONS ::= BEGIN
-+
-+ IMPORTS
-+ MODULE-IDENTITY, OBJECT-TYPE, Counter32, Gauge32,
-+ Integer32, IpAddress
-+ FROM SNMPv2-SMI
-+ TEXTUAL-CONVENTION, TruthValue, RowStatus
-+ FROM SNMPv2-TC
-+ MODULE-COMPLIANCE, OBJECT-GROUP FROM SNMPv2-CONF
-+ mib-2 FROM RFC1213-MIB;
-+
-+-- This MIB module uses the extended OBJECT-TYPE macro as
-+-- defined in [9].
-+
-+ospf MODULE-IDENTITY
-+ LAST-UPDATED "9501201225Z" -- Fri Jan 20 12:25:50 PST 1995
-+ ORGANIZATION "IETF OSPF Working Group"
-+ CONTACT-INFO
-+ " Fred Baker
-+ Postal: Cisco Systems
-+ 519 Lado Drive
-+ Santa Barbara, California 93111
-+ Tel: +1 805 681 0115
-+ E-Mail: fred at cisco.com
-+
-+ Rob Coltun
-+ Postal: RainbowBridge Communications
-+ Tel: (301) 340-9416
-+ E-Mail: rcoltun at rainbow-bridge.com"
-+ DESCRIPTION
-+ "The MIB module to describe the OSPF Version 2
-+ Protocol"
-+ ::= { mib-2 14 }
-+
-+-- The Area ID, in OSPF, has the same format as an IP Address,
-+-- but has the function of defining a summarization point for
-+-- Link State Advertisements
-+
-+AreaID ::= TEXTUAL-CONVENTION
-+ STATUS current
-+ DESCRIPTION
-+ "An OSPF Area Identifier."
-+ SYNTAX IpAddress
-+
-+
-+-- The Router ID, in OSPF, has the same format as an IP Address,
-+-- but identifies the router independent of its IP Address.
-+
-+RouterID ::= TEXTUAL-CONVENTION
-+ STATUS current
-+ DESCRIPTION
-+ "A OSPF Router Identifier."
-+ SYNTAX IpAddress
-+
-+
-+-- The OSPF Metric is defined as an unsigned value in the range
-+
-+Metric ::= TEXTUAL-CONVENTION
-+ STATUS current
-+ DESCRIPTION
-+ "The OSPF Internal Metric."
-+ SYNTAX Integer32 (0..'FFFF'h)
-+
-+BigMetric ::= TEXTUAL-CONVENTION
-+ STATUS current
-+ DESCRIPTION
-+ "The OSPF External Metric."
-+ SYNTAX Integer32 (0..'FFFFFF'h)
-+
-+-- Status Values
-+
-+Status ::= TEXTUAL-CONVENTION
-+ STATUS current
-+ DESCRIPTION
-+ "The status of an interface: 'enabled' indicates that
-+ it is willing to communicate with other OSPF Routers,
-+ while 'disabled' indicates that it is not."
-+ SYNTAX INTEGER { enabled (1), disabled (2) }
-+
-+-- Time Durations measured in seconds
-+
-+PositiveInteger ::= TEXTUAL-CONVENTION
-+ STATUS current
-+ DESCRIPTION
-+ "A positive integer. Values in excess are precluded as
-+ unnecessary and prone to interoperability issues."
-+ SYNTAX Integer32 (0..'7FFFFFFF'h)
-+
-+HelloRange ::= TEXTUAL-CONVENTION
-+ STATUS current
-+ DESCRIPTION
-+ "The range of intervals on which hello messages are
-+ exchanged."
-+ SYNTAX Integer32 (1..'FFFF'h)
-+
-+UpToMaxAge ::= TEXTUAL-CONVENTION
-+ STATUS current
-+ DESCRIPTION
-+ "The values that one might find or configure for
-+ variables bounded by the maximum age of an LSA."
-+ SYNTAX Integer32 (0..3600)
-+
-+
-+-- The range of ifIndex
-+
-+InterfaceIndex ::= TEXTUAL-CONVENTION
-+ STATUS current
-+ DESCRIPTION
-+ "The range of ifIndex."
-+ SYNTAX Integer32
-+
-+
-+-- Potential Priorities for the Designated Router Election
-+
-+DesignatedRouterPriority ::= TEXTUAL-CONVENTION
-+ STATUS current
-+ DESCRIPTION
-+ "The values defined for the priority of a system for
-+ becoming the designated router."
-+ SYNTAX Integer32 (0..'FF'h)
-+
-+TOSType ::= TEXTUAL-CONVENTION
-+ STATUS current
-+ DESCRIPTION
-+ "Type of Service is defined as a mapping to the IP Type of
-+ Service Flags as defined in the IP Forwarding Table MIB
-+
-+ +-----+-----+-----+-----+-----+-----+-----+-----+
-+ | | | |
-+ | PRECEDENCE | TYPE OF SERVICE | 0 |
-+ | | | |
-+ +-----+-----+-----+-----+-----+-----+-----+-----+
-+
-+ IP TOS IP TOS
-+ Field Policy Field Policy
-+
-+ Contents Code Contents Code
-+ 0 0 0 0 ==> 0 0 0 0 1 ==> 2
-+ 0 0 1 0 ==> 4 0 0 1 1 ==> 6
-+ 0 1 0 0 ==> 8 0 1 0 1 ==> 10
-+ 0 1 1 0 ==> 12 0 1 1 1 ==> 14
-+ 1 0 0 0 ==> 16 1 0 0 1 ==> 18
-+ 1 0 1 0 ==> 20 1 0 1 1 ==> 22
-+ 1 1 0 0 ==> 24 1 1 0 1 ==> 26
-+ 1 1 1 0 ==> 28 1 1 1 1 ==> 30
-+
-+ The remaining values are left for future definition."
-+ SYNTAX Integer32 (0..30)
-+
-+
-+-- OSPF General Variables
-+
-+-- These parameters apply globally to the Router's
-+-- OSPF Process.
-+
-+ospfGeneralGroup OBJECT IDENTIFIER ::= { ospf 1 }
-+
-+
-+ ospfRouterId OBJECT-TYPE
-+ SYNTAX RouterID
-+ MAX-ACCESS read-write
-+ STATUS current
-+ DESCRIPTION
-+ "A 32-bit integer uniquely identifying the
-+ router in the Autonomous System.
-+
-+ By convention, to ensure uniqueness, this
-+ should default to the value of one of the
-+ router's IP interface addresses."
-+ REFERENCE
-+ "OSPF Version 2, C.1 Global parameters"
-+ ::= { ospfGeneralGroup 1 }
-+
-+
-+ ospfAdminStat OBJECT-TYPE
-+ SYNTAX Status
-+ MAX-ACCESS read-write
-+ STATUS current
-+ DESCRIPTION
-+ "The administrative status of OSPF in the
-+ router. The value 'enabled' denotes that the
-+ OSPF Process is active on at least one inter-
-+ face; 'disabled' disables it on all inter-
-+ faces."
-+ ::= { ospfGeneralGroup 2 }
-+
-+ ospfVersionNumber OBJECT-TYPE
-+ SYNTAX INTEGER { version2 (2) }
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "The current version number of the OSPF proto-
-+ col is 2."
-+ REFERENCE
-+ "OSPF Version 2, Title"
-+ ::= { ospfGeneralGroup 3 }
-+
-+
-+ ospfAreaBdrRtrStatus OBJECT-TYPE
-+ SYNTAX TruthValue
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "A flag to note whether this router is an area
-+ border router."
-+ REFERENCE
-+ "OSPF Version 2, Section 3 Splitting the AS into
-+ Areas"
-+ ::= { ospfGeneralGroup 4 }
-+
-+
-+ ospfASBdrRtrStatus OBJECT-TYPE
-+ SYNTAX TruthValue
-+ MAX-ACCESS read-write
-+ STATUS current
-+ DESCRIPTION
-+ "A flag to note whether this router is config-
-+ ured as an Autonomous System border router."
-+ REFERENCE
-+ "OSPF Version 2, Section 3.3 Classification of
-+ routers"
-+ ::= { ospfGeneralGroup 5 }
-+
-+ ospfExternLsaCount OBJECT-TYPE
-+ SYNTAX Gauge32
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "The number of external (LS type 5) link-state
-+ advertisements in the link-state database."
-+ REFERENCE
-+ "OSPF Version 2, Appendix A.4.5 AS external link
-+ advertisements"
-+ ::= { ospfGeneralGroup 6 }
-+
-+
-+ ospfExternLsaCksumSum OBJECT-TYPE
-+ SYNTAX Integer32
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "The 32-bit unsigned sum of the LS checksums of
-+ the external link-state advertisements con-
-+ tained in the link-state database. This sum
-+ can be used to determine if there has been a
-+ change in a router's link state database, and
-+ to compare the link-state database of two
-+ routers."
-+ ::= { ospfGeneralGroup 7 }
-+
-+
-+ ospfTOSSupport OBJECT-TYPE
-+ SYNTAX TruthValue
-+ MAX-ACCESS read-write
-+ STATUS current
-+ DESCRIPTION
-+ "The router's support for type-of-service rout-
-+ ing."
-+ REFERENCE
-+ "OSPF Version 2, Appendix F.1.2 Optional TOS
-+ support"
-+ ::= { ospfGeneralGroup 8 }
-+
-+ ospfOriginateNewLsas OBJECT-TYPE
-+ SYNTAX Counter32
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "The number of new link-state advertisements
-+ that have been originated. This number is in-
-+ cremented each time the router originates a new
-+ LSA."
-+ ::= { ospfGeneralGroup 9 }
-+
-+
-+ ospfRxNewLsas OBJECT-TYPE
-+ SYNTAX Counter32
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "The number of link-state advertisements re-
-+ ceived determined to be new instantiations.
-+ This number does not include newer instantia-
-+ tions of self-originated link-state advertise-
-+ ments."
-+ ::= { ospfGeneralGroup 10 }
-+
-+ ospfExtLsdbLimit OBJECT-TYPE
-+ SYNTAX Integer32 (-1..'7FFFFFFF'h)
-+ MAX-ACCESS read-write
-+ STATUS current
-+ DESCRIPTION
-+ "The maximum number of non-default AS-
-+ external-LSAs entries that can be stored in the
-+ link-state database. If the value is -1, then
-+ there is no limit.
-+
-+ When the number of non-default AS-external-LSAs
-+ in a router's link-state database reaches
-+ ospfExtLsdbLimit, the router enters Overflow-
-+ State. The router never holds more than
-+ ospfExtLsdbLimit non-default AS-external-LSAs
-+ in its database. OspfExtLsdbLimit MUST be set
-+ identically in all routers attached to the OSPF
-+ backbone and/or any regular OSPF area. (i.e.,
-+ OSPF stub areas and NSSAs are excluded)."
-+ DEFVAL { -1 }
-+ ::= { ospfGeneralGroup 11 }
-+
-+ ospfMulticastExtensions OBJECT-TYPE
-+ SYNTAX Integer32
-+ MAX-ACCESS read-write
-+ STATUS current
-+ DESCRIPTION
-+ "A Bit Mask indicating whether the router is
-+ forwarding IP multicast (Class D) datagrams
-+ based on the algorithms defined in the Multi-
-+ cast Extensions to OSPF.
-+
-+ Bit 0, if set, indicates that the router can
-+ forward IP multicast datagrams in the router's
-+ directly attached areas (called intra-area mul-
-+ ticast routing).
-+
-+ Bit 1, if set, indicates that the router can
-+ forward IP multicast datagrams between OSPF
-+ areas (called inter-area multicast routing).
-+
-+ Bit 2, if set, indicates that the router can
-+ forward IP multicast datagrams between Auto-
-+ nomous Systems (called inter-AS multicast rout-
-+ ing).
-+
-+ Only certain combinations of bit settings are
-+ allowed, namely: 0 (no multicast forwarding is
-+ enabled), 1 (intra-area multicasting only), 3
-+ (intra-area and inter-area multicasting), 5
-+ (intra-area and inter-AS multicasting) and 7
-+ (multicasting everywhere). By default, no mul-
-+ ticast forwarding is enabled."
-+ DEFVAL { 0 }
-+ ::= { ospfGeneralGroup 12 }
-+
-+ ospfExitOverflowInterval OBJECT-TYPE
-+ SYNTAX PositiveInteger
-+ MAX-ACCESS read-write
-+ STATUS current
-+ DESCRIPTION
-+ "The number of seconds that, after entering
-+ OverflowState, a router will attempt to leave
-+ OverflowState. This allows the router to again
-+ originate non-default AS-external-LSAs. When
-+ set to 0, the router will not leave Overflow-
-+ State until restarted."
-+ DEFVAL { 0 }
-+ ::= { ospfGeneralGroup 13 }
-+
-+
-+ ospfDemandExtensions OBJECT-TYPE
-+ SYNTAX TruthValue
-+ MAX-ACCESS read-write
-+ STATUS current
-+ DESCRIPTION
-+ "The router's support for demand routing."
-+ REFERENCE
-+ "OSPF Version 2, Appendix on Demand Routing"
-+ ::= { ospfGeneralGroup 14 }
-+
-+
-+-- The OSPF Area Data Structure contains information
-+-- regarding the various areas. The interfaces and
-+-- virtual links are configured as part of these areas.
-+-- Area 0.0.0.0, by definition, is the Backbone Area
-+
-+
-+ ospfAreaTable OBJECT-TYPE
-+ SYNTAX SEQUENCE OF OspfAreaEntry
-+ MAX-ACCESS not-accessible
-+ STATUS current
-+ DESCRIPTION
-+ "Information describing the configured parame-
-+ ters and cumulative statistics of the router's
-+ attached areas."
-+ REFERENCE
-+ "OSPF Version 2, Section 6 The Area Data Struc-
-+ ture"
-+ ::= { ospf 2 }
-+
-+
-+ ospfAreaEntry OBJECT-TYPE
-+ SYNTAX OspfAreaEntry
-+ MAX-ACCESS not-accessible
-+ STATUS current
-+ DESCRIPTION
-+ "Information describing the configured parame-
-+ ters and cumulative statistics of one of the
-+ router's attached areas."
-+ INDEX { ospfAreaId }
-+ ::= { ospfAreaTable 1 }
-+
-+OspfAreaEntry ::=
-+ SEQUENCE {
-+ ospfAreaId
-+ AreaID,
-+ ospfAuthType
-+ Integer32,
-+ ospfImportAsExtern
-+ INTEGER,
-+ ospfSpfRuns
-+ Counter32,
-+ ospfAreaBdrRtrCount
-+ Gauge32,
-+ ospfAsBdrRtrCount
-+ Gauge32,
-+ ospfAreaLsaCount
-+ Gauge32,
-+ ospfAreaLsaCksumSum
-+ Integer32,
-+ ospfAreaSummary
-+ INTEGER,
-+ ospfAreaStatus
-+ RowStatus
-+ }
-+
-+ ospfAreaId OBJECT-TYPE
-+ SYNTAX AreaID
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "A 32-bit integer uniquely identifying an area.
-+ Area ID 0.0.0.0 is used for the OSPF backbone."
-+ REFERENCE
-+ "OSPF Version 2, Appendix C.2 Area parameters"
-+ ::= { ospfAreaEntry 1 }
-+
-+
-+ ospfAuthType OBJECT-TYPE
-+ SYNTAX Integer32
-+ -- none (0),
-+ -- simplePassword (1)
-+ -- md5 (2)
-+ -- reserved for specification by IANA (> 2)
-+ MAX-ACCESS read-create
-+ STATUS obsolete
-+ DESCRIPTION
-+ "The authentication type specified for an area.
-+ Additional authentication types may be assigned
-+ locally on a per Area basis."
-+ REFERENCE
-+ "OSPF Version 2, Appendix E Authentication"
-+ DEFVAL { 0 } -- no authentication, by default
-+ ::= { ospfAreaEntry 2 }
-+
-+ ospfImportAsExtern OBJECT-TYPE
-+ SYNTAX INTEGER {
-+ importExternal (1),
-+ importNoExternal (2),
-+ importNssa (3)
-+ }
-+ MAX-ACCESS read-create
-+ STATUS current
-+ DESCRIPTION
-+ "The area's support for importing AS external
-+ link- state advertisements."
-+ REFERENCE
-+ "OSPF Version 2, Appendix C.2 Area parameters"
-+ DEFVAL { importExternal }
-+ ::= { ospfAreaEntry 3 }
-+
-+
-+ ospfSpfRuns OBJECT-TYPE
-+ SYNTAX Counter32
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "The number of times that the intra-area route
-+ table has been calculated using this area's
-+ link-state database. This is typically done
-+ using Dijkstra's algorithm."
-+ ::= { ospfAreaEntry 4 }
-+
-+
-+ ospfAreaBdrRtrCount OBJECT-TYPE
-+ SYNTAX Gauge32
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "The total number of area border routers reach-
-+ able within this area. This is initially zero,
-+ and is calculated in each SPF Pass."
-+ ::= { ospfAreaEntry 5 }
-+
-+ ospfAsBdrRtrCount OBJECT-TYPE
-+ SYNTAX Gauge32
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "The total number of Autonomous System border
-+ routers reachable within this area. This is
-+ initially zero, and is calculated in each SPF
-+ Pass."
-+ ::= { ospfAreaEntry 6 }
-+
-+
-+ ospfAreaLsaCount OBJECT-TYPE
-+ SYNTAX Gauge32
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "The total number of link-state advertisements
-+ in this area's link-state database, excluding
-+ AS External LSA's."
-+ ::= { ospfAreaEntry 7 }
-+
-+
-+ ospfAreaLsaCksumSum OBJECT-TYPE
-+ SYNTAX Integer32
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "The 32-bit unsigned sum of the link-state ad-
-+ vertisements' LS checksums contained in this
-+ area's link-state database. This sum excludes
-+ external (LS type 5) link-state advertisements.
-+ The sum can be used to determine if there has
-+ been a change in a router's link state data-
-+ base, and to compare the link-state database of
-+ two routers."
-+ DEFVAL { 0 }
-+ ::= { ospfAreaEntry 8 }
-+
-+ ospfAreaSummary OBJECT-TYPE
-+ SYNTAX INTEGER {
-+ noAreaSummary (1),
-+ sendAreaSummary (2)
-+ }
-+ MAX-ACCESS read-create
-+ STATUS current
-+ DESCRIPTION
-+ "The variable ospfAreaSummary controls the im-
-+ port of summary LSAs into stub areas. It has
-+ no effect on other areas.
-+
-+ If it is noAreaSummary, the router will neither
-+ originate nor propagate summary LSAs into the
-+ stub area. It will rely entirely on its de-
-+ fault route.
-+
-+ If it is sendAreaSummary, the router will both
-+ summarize and propagate summary LSAs."
-+ DEFVAL { noAreaSummary }
-+ ::= { ospfAreaEntry 9 }
-+
-+
-+ ospfAreaStatus OBJECT-TYPE
-+ SYNTAX RowStatus
-+ MAX-ACCESS read-create
-+ STATUS current
-+ DESCRIPTION
-+ "This variable displays the status of the en-
-+ try. Setting it to 'invalid' has the effect of
-+ rendering it inoperative. The internal effect
-+ (row removal) is implementation dependent."
-+ ::= { ospfAreaEntry 10 }
-+
-+
-+-- OSPF Area Default Metric Table
-+
-+-- The OSPF Area Default Metric Table describes the metrics
-+-- that a default Area Border Router will advertise into a
-+-- Stub area.
-+
-+
-+ ospfStubAreaTable OBJECT-TYPE
-+ SYNTAX SEQUENCE OF OspfStubAreaEntry
-+ MAX-ACCESS not-accessible
-+ STATUS current
-+ DESCRIPTION
-+ "The set of metrics that will be advertised by
-+ a default Area Border Router into a stub area."
-+ REFERENCE
-+ "OSPF Version 2, Appendix C.2, Area Parameters"
-+ ::= { ospf 3 }
-+
-+
-+ ospfStubAreaEntry OBJECT-TYPE
-+ SYNTAX OspfStubAreaEntry
-+ MAX-ACCESS not-accessible
-+ STATUS current
-+ DESCRIPTION
-+ "The metric for a given Type of Service that
-+ will be advertised by a default Area Border
-+ Router into a stub area."
-+ REFERENCE
-+ "OSPF Version 2, Appendix C.2, Area Parameters"
-+ INDEX { ospfStubAreaId, ospfStubTOS }
-+ ::= { ospfStubAreaTable 1 }
-+
-+OspfStubAreaEntry ::=
-+ SEQUENCE {
-+ ospfStubAreaId
-+ AreaID,
-+ ospfStubTOS
-+ TOSType,
-+ ospfStubMetric
-+ BigMetric,
-+ ospfStubStatus
-+ RowStatus,
-+ ospfStubMetricType
-+ INTEGER
-+ }
-+
-+ ospfStubAreaId OBJECT-TYPE
-+ SYNTAX AreaID
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "The 32 bit identifier for the Stub Area. On
-+ creation, this can be derived from the in-
-+ stance."
-+ ::= { ospfStubAreaEntry 1 }
-+
-+
-+ ospfStubTOS OBJECT-TYPE
-+ SYNTAX TOSType
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "The Type of Service associated with the
-+ metric. On creation, this can be derived from
-+ the instance."
-+ ::= { ospfStubAreaEntry 2 }
-+
-+
-+ ospfStubMetric OBJECT-TYPE
-+ SYNTAX BigMetric
-+ MAX-ACCESS read-create
-+ STATUS current
-+ DESCRIPTION
-+ "The metric value applied at the indicated type
-+ of service. By default, this equals the least
-+ metric at the type of service among the inter-
-+ faces to other areas."
-+ ::= { ospfStubAreaEntry 3 }
-+
-+
-+ ospfStubStatus OBJECT-TYPE
-+ SYNTAX RowStatus
-+ MAX-ACCESS read-create
-+ STATUS current
-+ DESCRIPTION
-+ "This variable displays the status of the en-
-+ try. Setting it to 'invalid' has the effect of
-+ rendering it inoperative. The internal effect
-+ (row removal) is implementation dependent."
-+ ::= { ospfStubAreaEntry 4 }
-+
-+ ospfStubMetricType OBJECT-TYPE
-+ SYNTAX INTEGER {
-+ ospfMetric (1), -- OSPF Metric
-+ comparableCost (2), -- external type 1
-+ nonComparable (3) -- external type 2
-+ }
-+ MAX-ACCESS read-create
-+ STATUS current
-+ DESCRIPTION
-+ "This variable displays the type of metric ad-
-+ vertised as a default route."
-+ DEFVAL { ospfMetric }
-+ ::= { ospfStubAreaEntry 5 }
-+
-+-- OSPF Link State Database
-+
-+-- The Link State Database contains the Link State
-+-- Advertisements from throughout the areas that the
-+-- device is attached to.
-+
-+
-+ ospfLsdbTable OBJECT-TYPE
-+ SYNTAX SEQUENCE OF OspfLsdbEntry
-+ MAX-ACCESS not-accessible
-+ STATUS current
-+ DESCRIPTION
-+ "The OSPF Process's Link State Database."
-+ REFERENCE
-+ "OSPF Version 2, Section 12 Link State Adver-
-+ tisements"
-+ ::= { ospf 4 }
-+
-+
-+ ospfLsdbEntry OBJECT-TYPE
-+ SYNTAX OspfLsdbEntry
-+ MAX-ACCESS not-accessible
-+ STATUS current
-+ DESCRIPTION
-+ "A single Link State Advertisement."
-+ INDEX { ospfLsdbAreaId, ospfLsdbType,
-+ ospfLsdbLsid, ospfLsdbRouterId }
-+ ::= { ospfLsdbTable 1 }
-+
-+OspfLsdbEntry ::=
-+ SEQUENCE {
-+ ospfLsdbAreaId
-+ AreaID,
-+ ospfLsdbType
-+ INTEGER,
-+ ospfLsdbLsid
-+ IpAddress,
-+ ospfLsdbRouterId
-+ RouterID,
-+ ospfLsdbSequence
-+ Integer32,
-+ ospfLsdbAge
-+ Integer32,
-+ ospfLsdbChecksum
-+ Integer32,
-+ ospfLsdbAdvertisement
-+ OCTET STRING
-+ }
-+ ospfLsdbAreaId OBJECT-TYPE
-+ SYNTAX AreaID
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "The 32 bit identifier of the Area from which
-+ the LSA was received."
-+ REFERENCE
-+ "OSPF Version 2, Appendix C.2 Area parameters"
-+ ::= { ospfLsdbEntry 1 }
-+
-+-- External Link State Advertisements are permitted
-+-- for backward compatibility, but should be displayed in
-+-- the ospfExtLsdbTable rather than here.
-+
-+ ospfLsdbType OBJECT-TYPE
-+ SYNTAX INTEGER {
-+ routerLink (1),
-+ networkLink (2),
-+ summaryLink (3),
-+ asSummaryLink (4),
-+ asExternalLink (5), -- but see ospfExtLsdbTable
-+ multicastLink (6),
-+ nssaExternalLink (7)
-+ }
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "The type of the link state advertisement.
-+ Each link state type has a separate advertise-
-+ ment format."
-+ REFERENCE
-+ "OSPF Version 2, Appendix A.4.1 The Link State
-+ Advertisement header"
-+ ::= { ospfLsdbEntry 2 }
-+
-+ ospfLsdbLsid OBJECT-TYPE
-+ SYNTAX IpAddress
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "The Link State ID is an LS Type Specific field
-+ containing either a Router ID or an IP Address;
-+ it identifies the piece of the routing domain
-+ that is being described by the advertisement."
-+ REFERENCE
-+ "OSPF Version 2, Section 12.1.4 Link State ID"
-+ ::= { ospfLsdbEntry 3 }
-+ ospfLsdbRouterId OBJECT-TYPE
-+ SYNTAX RouterID
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "The 32 bit number that uniquely identifies the
-+ originating router in the Autonomous System."
-+ REFERENCE
-+ "OSPF Version 2, Appendix C.1 Global parameters"
-+ ::= { ospfLsdbEntry 4 }
-+
-+-- Note that the OSPF Sequence Number is a 32 bit signed
-+-- integer. It starts with the value '80000001'h,
-+-- or -'7FFFFFFF'h, and increments until '7FFFFFFF'h
-+-- Thus, a typical sequence number will be very negative.
-+
-+ ospfLsdbSequence OBJECT-TYPE
-+ SYNTAX Integer32
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "The sequence number field is a signed 32-bit
-+ integer. It is used to detect old and dupli-
-+ cate link state advertisements. The space of
-+ sequence numbers is linearly ordered. The
-+ larger the sequence number the more recent the
-+ advertisement."
-+ REFERENCE
-+ "OSPF Version 2, Section 12.1.6 LS sequence
-+ number"
-+ ::= { ospfLsdbEntry 5 }
-+
-+
-+ ospfLsdbAge OBJECT-TYPE
-+ SYNTAX Integer32 -- Should be 0..MaxAge
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "This field is the age of the link state adver-
-+ tisement in seconds."
-+ REFERENCE
-+ "OSPF Version 2, Section 12.1.1 LS age"
-+ ::= { ospfLsdbEntry 6 }
-+
-+ ospfLsdbChecksum OBJECT-TYPE
-+ SYNTAX Integer32
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "This field is the checksum of the complete
-+ contents of the advertisement, excepting the
-+ age field. The age field is excepted so that
-+ an advertisement's age can be incremented
-+ without updating the checksum. The checksum
-+ used is the same that is used for ISO connec-
-+ tionless datagrams; it is commonly referred to
-+ as the Fletcher checksum."
-+ REFERENCE
-+ "OSPF Version 2, Section 12.1.7 LS checksum"
-+ ::= { ospfLsdbEntry 7 }
-+
-+
-+ ospfLsdbAdvertisement OBJECT-TYPE
-+ SYNTAX OCTET STRING (SIZE (1..65535))
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "The entire Link State Advertisement, including
-+ its header."
-+ REFERENCE
-+ "OSPF Version 2, Section 12 Link State Adver-
-+ tisements"
-+ ::= { ospfLsdbEntry 8 }
-+
-+
-+-- Address Range Table
-+
-+-- The Address Range Table acts as an adjunct to the Area
-+-- Table; It describes those Address Range Summaries that
-+-- are configured to be propagated from an Area to reduce
-+-- the amount of information about it which is known beyond
-+-- its borders.
-+
-+ ospfAreaRangeTable OBJECT-TYPE
-+ SYNTAX SEQUENCE OF OspfAreaRangeEntry
-+ MAX-ACCESS not-accessible
-+ STATUS obsolete
-+ DESCRIPTION
-+ "A range if IP addresses specified by an IP
-+ address/IP network mask pair. For example,
-+ class B address range of X.X.X.X with a network
-+ mask of 255.255.0.0 includes all IP addresses
-+ from X.X.0.0 to X.X.255.255"
-+ REFERENCE
-+ "OSPF Version 2, Appendix C.2 Area parameters"
-+ ::= { ospf 5 }
-+ ospfAreaRangeEntry OBJECT-TYPE
-+ SYNTAX OspfAreaRangeEntry
-+ MAX-ACCESS not-accessible
-+ STATUS obsolete
-+ DESCRIPTION
-+ "A range if IP addresses specified by an IP
-+ address/IP network mask pair. For example,
-+ class B address range of X.X.X.X with a network
-+ mask of 255.255.0.0 includes all IP addresses
-+ from X.X.0.0 to X.X.255.255"
-+ REFERENCE
-+ "OSPF Version 2, Appendix C.2 Area parameters"
-+ INDEX { ospfAreaRangeAreaId, ospfAreaRangeNet }
-+ ::= { ospfAreaRangeTable 1 }
-+
-+OspfAreaRangeEntry ::=
-+ SEQUENCE {
-+ ospfAreaRangeAreaId
-+ AreaID,
-+ ospfAreaRangeNet
-+ IpAddress,
-+ ospfAreaRangeMask
-+ IpAddress,
-+ ospfAreaRangeStatus
-+ RowStatus,
-+ ospfAreaRangeEffect
-+ INTEGER
-+ }
-+
-+ ospfAreaRangeAreaId OBJECT-TYPE
-+ SYNTAX AreaID
-+ MAX-ACCESS read-only
-+ STATUS obsolete
-+ DESCRIPTION
-+ "The Area the Address Range is to be found
-+ within."
-+ REFERENCE
-+ "OSPF Version 2, Appendix C.2 Area parameters"
-+ ::= { ospfAreaRangeEntry 1 }
-+
-+
-+ ospfAreaRangeNet OBJECT-TYPE
-+ SYNTAX IpAddress
-+ MAX-ACCESS read-only
-+ STATUS obsolete
-+ DESCRIPTION
-+ "The IP Address of the Net or Subnet indicated
-+ by the range."
-+ REFERENCE
-+ "OSPF Version 2, Appendix C.2 Area parameters"
-+ ::= { ospfAreaRangeEntry 2 }
-+
-+
-+ ospfAreaRangeMask OBJECT-TYPE
-+ SYNTAX IpAddress
-+ MAX-ACCESS read-create
-+ STATUS obsolete
-+ DESCRIPTION
-+ "The Subnet Mask that pertains to the Net or
-+ Subnet."
-+ REFERENCE
-+ "OSPF Version 2, Appendix C.2 Area parameters"
-+ ::= { ospfAreaRangeEntry 3 }
-+
-+ ospfAreaRangeStatus OBJECT-TYPE
-+ SYNTAX RowStatus
-+ MAX-ACCESS read-create
-+ STATUS obsolete
-+ DESCRIPTION
-+ "This variable displays the status of the en-
-+ try. Setting it to 'invalid' has the effect of
-+ rendering it inoperative. The internal effect
-+ (row removal) is implementation dependent."
-+ ::= { ospfAreaRangeEntry 4 }
-+
-+
-+ ospfAreaRangeEffect OBJECT-TYPE
-+ SYNTAX INTEGER {
-+ advertiseMatching (1),
-+ doNotAdvertiseMatching (2)
-+ }
-+ MAX-ACCESS read-create
-+ STATUS obsolete
-+ DESCRIPTION
-+ "Subnets subsumed by ranges either trigger the
-+ advertisement of the indicated summary (adver-
-+ tiseMatching), or result in the subnet's not
-+ being advertised at all outside the area."
-+ DEFVAL { advertiseMatching }
-+ ::= { ospfAreaRangeEntry 5 }
-+
-+
-+
-+-- OSPF Host Table
-+
-+-- The Host/Metric Table indicates what hosts are directly
-+-- attached to the Router, and what metrics and types of
-+-- service should be advertised for them.
-+
-+ ospfHostTable OBJECT-TYPE
-+ SYNTAX SEQUENCE OF OspfHostEntry
-+ MAX-ACCESS not-accessible
-+ STATUS current
-+ DESCRIPTION
-+ "The list of Hosts, and their metrics, that the
-+ router will advertise as host routes."
-+ REFERENCE
-+ "OSPF Version 2, Appendix C.6 Host route param-
-+ eters"
-+ ::= { ospf 6 }
-+
-+
-+ ospfHostEntry OBJECT-TYPE
-+ SYNTAX OspfHostEntry
-+ MAX-ACCESS not-accessible
-+ STATUS current
-+ DESCRIPTION
-+ "A metric to be advertised, for a given type of
-+ service, when a given host is reachable."
-+ INDEX { ospfHostIpAddress, ospfHostTOS }
-+ ::= { ospfHostTable 1 }
-+
-+OspfHostEntry ::=
-+ SEQUENCE {
-+ ospfHostIpAddress
-+ IpAddress,
-+ ospfHostTOS
-+ TOSType,
-+ ospfHostMetric
-+ Metric,
-+ ospfHostStatus
-+ RowStatus,
-+ ospfHostAreaID
-+ AreaID
-+ }
-+
-+ ospfHostIpAddress OBJECT-TYPE
-+ SYNTAX IpAddress
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "The IP Address of the Host."
-+ REFERENCE
-+ "OSPF Version 2, Appendix C.6 Host route parame-
-+ ters"
-+ ::= { ospfHostEntry 1 }
-+
-+
-+ ospfHostTOS OBJECT-TYPE
-+ SYNTAX TOSType
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "The Type of Service of the route being config-
-+ ured."
-+ REFERENCE
-+ "OSPF Version 2, Appendix C.6 Host route parame-
-+ ters"
-+ ::= { ospfHostEntry 2 }
-+
-+
-+ ospfHostMetric OBJECT-TYPE
-+ SYNTAX Metric
-+ MAX-ACCESS read-create
-+ STATUS current
-+ DESCRIPTION
-+ "The Metric to be advertised."
-+ REFERENCE
-+ "OSPF Version 2, Appendix C.6 Host route parame-
-+ ters"
-+ ::= { ospfHostEntry 3 }
-+
-+ ospfHostStatus OBJECT-TYPE
-+ SYNTAX RowStatus
-+ MAX-ACCESS read-create
-+ STATUS current
-+ DESCRIPTION
-+ "This variable displays the status of the en-
-+ try. Setting it to 'invalid' has the effect of
-+ rendering it inoperative. The internal effect
-+ (row removal) is implementation dependent."
-+ ::= { ospfHostEntry 4 }
-+
-+
-+ ospfHostAreaID OBJECT-TYPE
-+ SYNTAX AreaID
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "The Area the Host Entry is to be found within.
-+ By default, the area that a subsuming OSPF in-
-+ terface is in, or 0.0.0.0"
-+ REFERENCE
-+ "OSPF Version 2, Appendix C.2 Area parameters"
-+ ::= { ospfHostEntry 5 }
-+
-+
-+-- OSPF Interface Table
-+
-+-- The OSPF Interface Table augments the ipAddrTable
-+-- with OSPF specific information.
-+
-+ ospfIfTable OBJECT-TYPE
-+ SYNTAX SEQUENCE OF OspfIfEntry
-+ MAX-ACCESS not-accessible
-+ STATUS current
-+ DESCRIPTION
-+ "The OSPF Interface Table describes the inter-
-+ faces from the viewpoint of OSPF."
-+ REFERENCE
-+ "OSPF Version 2, Appendix C.3 Router interface
-+ parameters"
-+ ::= { ospf 7 }
-+
-+
-+ ospfIfEntry OBJECT-TYPE
-+ SYNTAX OspfIfEntry
-+ MAX-ACCESS not-accessible
-+ STATUS current
-+ DESCRIPTION
-+ "The OSPF Interface Entry describes one inter-
-+ face from the viewpoint of OSPF."
-+ INDEX { ospfIfIpAddress, ospfAddressLessIf }
-+ ::= { ospfIfTable 1 }
-+
-+OspfIfEntry ::=
-+ SEQUENCE {
-+ ospfIfIpAddress
-+ IpAddress,
-+ ospfAddressLessIf
-+ Integer32,
-+ ospfIfAreaId
-+ AreaID,
-+ ospfIfType
-+ INTEGER,
-+ ospfIfAdminStat
-+ Status,
-+ ospfIfRtrPriority
-+ DesignatedRouterPriority,
-+ ospfIfTransitDelay
-+ UpToMaxAge,
-+ ospfIfRetransInterval
-+ UpToMaxAge,
-+ ospfIfHelloInterval
-+ HelloRange,
-+ ospfIfRtrDeadInterval
-+ PositiveInteger,
-+ ospfIfPollInterval
-+ PositiveInteger,
-+ ospfIfState
-+ INTEGER,
-+ ospfIfDesignatedRouter
-+ IpAddress,
-+ ospfIfBackupDesignatedRouter
-+ IpAddress,
-+ ospfIfEvents
-+ Counter32,
-+ ospfIfAuthType
-+ INTEGER,
-+ ospfIfAuthKey
-+ OCTET STRING,
-+ ospfIfStatus
-+ RowStatus,
-+ ospfIfMulticastForwarding
-+ INTEGER,
-+ ospfIfDemand
-+ TruthValue
-+ }
-+
-+ ospfIfIpAddress OBJECT-TYPE
-+ SYNTAX IpAddress
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "The IP address of this OSPF interface."
-+ ::= { ospfIfEntry 1 }
-+
-+ ospfAddressLessIf OBJECT-TYPE
-+ SYNTAX Integer32
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "For the purpose of easing the instancing of
-+ addressed and addressless interfaces; This
-+ variable takes the value 0 on interfaces with
-+ IP Addresses, and the corresponding value of
-+ ifIndex for interfaces having no IP Address."
-+ ::= { ospfIfEntry 2 }
-+ ospfIfAreaId OBJECT-TYPE
-+ SYNTAX AreaID
-+ MAX-ACCESS read-create
-+ STATUS current
-+ DESCRIPTION
-+ "A 32-bit integer uniquely identifying the area
-+ to which the interface connects. Area ID
-+ 0.0.0.0 is used for the OSPF backbone."
-+ DEFVAL { '00000000'H } -- 0.0.0.0
-+ ::= { ospfIfEntry 3 }
-+
-+ ospfIfType OBJECT-TYPE
-+ SYNTAX INTEGER {
-+ broadcast (1),
-+ nbma (2),
-+ pointToPoint (3),
-+ pointToMultipoint (5)
-+ }
-+ MAX-ACCESS read-create
-+ STATUS current
-+ DESCRIPTION
-+ "The OSPF interface type.
-+
-+ By way of a default, this field may be intuited
-+ from the corresponding value of ifType. Broad-
-+ cast LANs, such as Ethernet and IEEE 802.5,
-+ take the value 'broadcast', X.25 and similar
-+ technologies take the value 'nbma', and links
-+ that are definitively point to point take the
-+ value 'pointToPoint'."
-+ ::= { ospfIfEntry 4 }
-+
-+
-+ ospfIfAdminStat OBJECT-TYPE
-+ SYNTAX Status
-+ MAX-ACCESS read-create
-+ STATUS current
-+ DESCRIPTION
-+ "The OSPF interface's administrative status.
-+ The value formed on the interface, and the in-
-+ terface will be advertised as an internal route
-+ to some area. The value 'disabled' denotes
-+ that the interface is external to OSPF."
-+ DEFVAL { enabled }
-+ ::= { ospfIfEntry 5 }
-+
-+ ospfIfRtrPriority OBJECT-TYPE
-+ SYNTAX DesignatedRouterPriority
-+ MAX-ACCESS read-create
-+ STATUS current
-+ DESCRIPTION
-+ "The priority of this interface. Used in
-+ multi-access networks, this field is used in
-+ the designated router election algorithm. The
-+ value 0 signifies that the router is not eligi-
-+ ble to become the designated router on this
-+ particular network. In the event of a tie in
-+ this value, routers will use their Router ID as
-+ a tie breaker."
-+ DEFVAL { 1 }
-+ ::= { ospfIfEntry 6 }
-+
-+
-+ ospfIfTransitDelay OBJECT-TYPE
-+ SYNTAX UpToMaxAge
-+ MAX-ACCESS read-create
-+ STATUS current
-+ DESCRIPTION
-+ "The estimated number of seconds it takes to
-+ transmit a link state update packet over this
-+ interface."
-+ DEFVAL { 1 }
-+ ::= { ospfIfEntry 7 }
-+
-+
-+ ospfIfRetransInterval OBJECT-TYPE
-+ SYNTAX UpToMaxAge
-+ MAX-ACCESS read-create
-+ STATUS current
-+ DESCRIPTION
-+ "The number of seconds between link-state ad-
-+ vertisement retransmissions, for adjacencies
-+ belonging to this interface. This value is
-+ also used when retransmitting database descrip-
-+ tion and link-state request packets."
-+ DEFVAL { 5 }
-+ ::= { ospfIfEntry 8 }
-+
-+
-+ ospfIfHelloInterval OBJECT-TYPE
-+ SYNTAX HelloRange
-+ MAX-ACCESS read-create
-+ STATUS current
-+ DESCRIPTION
-+ "The length of time, in seconds, between the
-+ Hello packets that the router sends on the in-
-+ terface. This value must be the same for all
-+ routers attached to a common network."
-+ DEFVAL { 10 }
-+ ::= { ospfIfEntry 9 }
-+
-+
-+ ospfIfRtrDeadInterval OBJECT-TYPE
-+ SYNTAX PositiveInteger
-+ MAX-ACCESS read-create
-+ STATUS current
-+ DESCRIPTION
-+ "The number of seconds that a router's Hello
-+ packets have not been seen before it's neigh-
-+ bors declare the router down. This should be
-+ some multiple of the Hello interval. This
-+ value must be the same for all routers attached
-+ to a common network."
-+ DEFVAL { 40 }
-+ ::= { ospfIfEntry 10 }
-+
-+
-+ ospfIfPollInterval OBJECT-TYPE
-+ SYNTAX PositiveInteger
-+ MAX-ACCESS read-create
-+ STATUS current
-+ DESCRIPTION
-+ "The larger time interval, in seconds, between
-+ the Hello packets sent to an inactive non-
-+ broadcast multi- access neighbor."
-+ DEFVAL { 120 }
-+ ::= { ospfIfEntry 11 }
-+
-+
-+ ospfIfState OBJECT-TYPE
-+ SYNTAX INTEGER {
-+ down (1),
-+ loopback (2),
-+ waiting (3),
-+ pointToPoint (4),
-+ designatedRouter (5),
-+ backupDesignatedRouter (6),
-+ otherDesignatedRouter (7)
-+ }
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "The OSPF Interface State."
-+ DEFVAL { down }
-+ ::= { ospfIfEntry 12 }
-+
-+
-+ ospfIfDesignatedRouter OBJECT-TYPE
-+ SYNTAX IpAddress
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "The IP Address of the Designated Router."
-+ DEFVAL { '00000000'H } -- 0.0.0.0
-+ ::= { ospfIfEntry 13 }
-+
-+
-+ ospfIfBackupDesignatedRouter OBJECT-TYPE
-+ SYNTAX IpAddress
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "The IP Address of the Backup Designated
-+ Router."
-+ DEFVAL { '00000000'H } -- 0.0.0.0
-+ ::= { ospfIfEntry 14 }
-+
-+ ospfIfEvents OBJECT-TYPE
-+ SYNTAX Counter32
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "The number of times this OSPF interface has
-+ changed its state, or an error has occurred."
-+ ::= { ospfIfEntry 15 }
-+
-+
-+ ospfIfAuthKey OBJECT-TYPE
-+ SYNTAX OCTET STRING (SIZE (0..256))
-+ MAX-ACCESS read-create
-+ STATUS current
-+ DESCRIPTION
-+ "The Authentication Key. If the Area's Author-
-+ ization Type is simplePassword, and the key
-+ length is shorter than 8 octets, the agent will
-+ left adjust and zero fill to 8 octets.
-+
-+ Note that unauthenticated interfaces need no
-+ authentication key, and simple password authen-
-+ tication cannot use a key of more than 8 oc-
-+ tets. Larger keys are useful only with authen-
-+ tication mechanisms not specified in this docu-
-+ ment.
-+
-+ When read, ospfIfAuthKey always returns an Oc-
-+ tet String of length zero."
-+ REFERENCE
-+ "OSPF Version 2, Section 9 The Interface Data
-+ Structure"
-+ DEFVAL { '0000000000000000'H } -- 0.0.0.0.0.0.0.0
-+ ::= { ospfIfEntry 16 }
-+
-+ ospfIfStatus OBJECT-TYPE
-+ SYNTAX RowStatus
-+ MAX-ACCESS read-create
-+ STATUS current
-+ DESCRIPTION
-+ "This variable displays the status of the en-
-+ try. Setting it to 'invalid' has the effect of
-+ rendering it inoperative. The internal effect
-+ (row removal) is implementation dependent."
-+ ::= { ospfIfEntry 17 }
-+
-+
-+ ospfIfMulticastForwarding OBJECT-TYPE
-+ SYNTAX INTEGER {
-+ blocked (1), -- no multicast forwarding
-+ multicast (2), -- using multicast address
-+ unicast (3) -- to each OSPF neighbor
-+ }
-+ MAX-ACCESS read-create
-+ STATUS current
-+ DESCRIPTION
-+ "The way multicasts should forwarded on this
-+ interface; not forwarded, forwarded as data
-+ link multicasts, or forwarded as data link uni-
-+ casts. Data link multicasting is not meaning-
-+ ful on point to point and NBMA interfaces, and
-+ setting ospfMulticastForwarding to 0 effective-
-+ ly disables all multicast forwarding."
-+ DEFVAL { blocked }
-+ ::= { ospfIfEntry 18 }
-+
-+
-+ ospfIfDemand OBJECT-TYPE
-+ SYNTAX TruthValue
-+ MAX-ACCESS read-create
-+ STATUS current
-+ DESCRIPTION
-+ "Indicates whether Demand OSPF procedures (hel-
-+ lo supression to FULL neighbors and setting the
-+ DoNotAge flag on proogated LSAs) should be per-
-+ formed on this interface."
-+ DEFVAL { false }
-+ ::= { ospfIfEntry 19 }
-+
-+
-+ ospfIfAuthType OBJECT-TYPE
-+ SYNTAX INTEGER (0..255)
-+ -- none (0),
-+ -- simplePassword (1)
-+ -- md5 (2)
-+ -- reserved for specification by IANA (> 2)
-+ MAX-ACCESS read-create
-+ STATUS current
-+ DESCRIPTION
-+ "The authentication type specified for an in-
-+ terface. Additional authentication types may
-+ be assigned locally."
-+ REFERENCE
-+ "OSPF Version 2, Appendix E Authentication"
-+ DEFVAL { 0 } -- no authentication, by default
-+ ::= { ospfIfEntry 20 }
-+
-+
-+-- OSPF Interface Metric Table
-+
-+-- The Metric Table describes the metrics to be advertised
-+-- for a specified interface at the various types of service.
-+-- As such, this table is an adjunct of the OSPF Interface
-+-- Table.
-+
-+-- Types of service, as defined by RFC 791, have the ability
-+-- to request low delay, high bandwidth, or reliable linkage.
-+
-+-- For the purposes of this specification, the measure of
-+-- bandwidth
-+
-+-- Metric = 10^8 / ifSpeed
-+
-+-- is the default value. For multiple link interfaces, note
-+-- that ifSpeed is the sum of the individual link speeds.
-+-- This yields a number having the following typical values:
-+
-+-- Network Type/bit rate Metric
-+
-+-- >= 100 MBPS 1
-+-- Ethernet/802.3 10
-+-- E1 48
-+-- T1 (ESF) 65
-+-- 64 KBPS 1562
-+-- 56 KBPS 1785
-+-- 19.2 KBPS 5208
-+-- 9.6 KBPS 10416
-+
-+-- Routes that are not specified use the default (TOS 0) metric
-+
-+ ospfIfMetricTable OBJECT-TYPE
-+ SYNTAX SEQUENCE OF OspfIfMetricEntry
-+ MAX-ACCESS not-accessible
-+ STATUS current
-+ DESCRIPTION
-+ "The TOS metrics for a non-virtual interface
-+ identified by the interface index."
-+ REFERENCE
-+ "OSPF Version 2, Appendix C.3 Router interface
-+ parameters"
-+ ::= { ospf 8 }
-+
-+ ospfIfMetricEntry OBJECT-TYPE
-+ SYNTAX OspfIfMetricEntry
-+ MAX-ACCESS not-accessible
-+ STATUS current
-+ DESCRIPTION
-+ "A particular TOS metric for a non-virtual in-
-+ terface identified by the interface index."
-+ REFERENCE
-+ "OSPF Version 2, Appendix C.3 Router interface
-+ parameters"
-+ INDEX { ospfIfMetricIpAddress,
-+ ospfIfMetricAddressLessIf,
-+ ospfIfMetricTOS }
-+ ::= { ospfIfMetricTable 1 }
-+
-+OspfIfMetricEntry ::=
-+ SEQUENCE {
-+ ospfIfMetricIpAddress
-+ IpAddress,
-+ ospfIfMetricAddressLessIf
-+ Integer32,
-+ ospfIfMetricTOS
-+ TOSType,
-+ ospfIfMetricValue
-+ Metric,
-+ ospfIfMetricStatus
-+ RowStatus
-+ }
-+
-+ ospfIfMetricIpAddress OBJECT-TYPE
-+ SYNTAX IpAddress
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "The IP address of this OSPF interface. On row
-+ creation, this can be derived from the in-
-+ stance."
-+ ::= { ospfIfMetricEntry 1 }
-+
-+ ospfIfMetricAddressLessIf OBJECT-TYPE
-+ SYNTAX Integer32
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "For the purpose of easing the instancing of
-+ addressed and addressless interfaces; This
-+ variable takes the value 0 on interfaces with
-+ IP Addresses, and the value of ifIndex for in-
-+ terfaces having no IP Address. On row crea-
-+ tion, this can be derived from the instance."
-+ ::= { ospfIfMetricEntry 2 }
-+
-+
-+ ospfIfMetricTOS OBJECT-TYPE
-+ SYNTAX TOSType
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "The type of service metric being referenced.
-+ On row creation, this can be derived from the
-+ instance."
-+ ::= { ospfIfMetricEntry 3 }
-+
-+
-+ ospfIfMetricValue OBJECT-TYPE
-+ SYNTAX Metric
-+ MAX-ACCESS read-create
-+ STATUS current
-+ DESCRIPTION
-+ "The metric of using this type of service on
-+ this interface. The default value of the TOS 0
-+ Metric is 10^8 / ifSpeed."
-+ ::= { ospfIfMetricEntry 4 }
-+
-+ ospfIfMetricStatus OBJECT-TYPE
-+ SYNTAX RowStatus
-+ MAX-ACCESS read-create
-+ STATUS current
-+ DESCRIPTION
-+ "This variable displays the status of the en-
-+ try. Setting it to 'invalid' has the effect of
-+ rendering it inoperative. The internal effect
-+ (row removal) is implementation dependent."
-+ ::= { ospfIfMetricEntry 5 }
-+
-+
-+-- OSPF Virtual Interface Table
-+
-+-- The Virtual Interface Table describes the virtual
-+-- links that the OSPF Process is configured to
-+-- carry on.
-+
-+ ospfVirtIfTable OBJECT-TYPE
-+ SYNTAX SEQUENCE OF OspfVirtIfEntry
-+ MAX-ACCESS not-accessible
-+ STATUS current
-+ DESCRIPTION
-+ "Information about this router's virtual inter-
-+ faces."
-+ REFERENCE
-+ "OSPF Version 2, Appendix C.4 Virtual link
-+ parameters"
-+ ::= { ospf 9 }
-+
-+
-+ ospfVirtIfEntry OBJECT-TYPE
-+ SYNTAX OspfVirtIfEntry
-+ MAX-ACCESS not-accessible
-+ STATUS current
-+ DESCRIPTION
-+ "Information about a single Virtual Interface."
-+ INDEX { ospfVirtIfAreaId, ospfVirtIfNeighbor }
-+ ::= { ospfVirtIfTable 1 }
-+
-+OspfVirtIfEntry ::=
-+ SEQUENCE {
-+ ospfVirtIfAreaId
-+ AreaID,
-+ ospfVirtIfNeighbor
-+ RouterID,
-+ ospfVirtIfTransitDelay
-+ UpToMaxAge,
-+ ospfVirtIfRetransInterval
-+ UpToMaxAge,
-+ ospfVirtIfHelloInterval
-+ HelloRange,
-+ ospfVirtIfRtrDeadInterval
-+ PositiveInteger,
-+ ospfVirtIfState
-+ INTEGER,
-+ ospfVirtIfEvents
-+ Counter32,
-+ ospfVirtIfAuthType
-+ INTEGER,
-+ ospfVirtIfAuthKey
-+ OCTET STRING,
-+ ospfVirtIfStatus
-+ RowStatus
-+ }
-+
-+ ospfVirtIfAreaId OBJECT-TYPE
-+ SYNTAX AreaID
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "The Transit Area that the Virtual Link
-+ traverses. By definition, this is not 0.0.0.0"
-+ ::= { ospfVirtIfEntry 1 }
-+
-+
-+ ospfVirtIfNeighbor OBJECT-TYPE
-+ SYNTAX RouterID
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "The Router ID of the Virtual Neighbor."
-+ ::= { ospfVirtIfEntry 2 }
-+
-+
-+ ospfVirtIfTransitDelay OBJECT-TYPE
-+ SYNTAX UpToMaxAge
-+ MAX-ACCESS read-create
-+ STATUS current
-+ DESCRIPTION
-+ "The estimated number of seconds it takes to
-+ transmit a link- state update packet over this
-+ interface."
-+ DEFVAL { 1 }
-+ ::= { ospfVirtIfEntry 3 }
-+
-+
-+ ospfVirtIfRetransInterval OBJECT-TYPE
-+ SYNTAX UpToMaxAge
-+ MAX-ACCESS read-create
-+ STATUS current
-+ DESCRIPTION
-+ "The number of seconds between link-state ad-
-+ vertisement retransmissions, for adjacencies
-+ belonging to this interface. This value is
-+ also used when retransmitting database descrip-
-+ tion and link-state request packets. This
-+ value should be well over the expected round-
-+ trip time."
-+ DEFVAL { 5 }
-+ ::= { ospfVirtIfEntry 4 }
-+
-+
-+ ospfVirtIfHelloInterval OBJECT-TYPE
-+ SYNTAX HelloRange
-+ MAX-ACCESS read-create
-+ STATUS current
-+ DESCRIPTION
-+ "The length of time, in seconds, between the
-+ Hello packets that the router sends on the in-
-+ terface. This value must be the same for the
-+ virtual neighbor."
-+ DEFVAL { 10 }
-+ ::= { ospfVirtIfEntry 5 }
-+
-+
-+ ospfVirtIfRtrDeadInterval OBJECT-TYPE
-+ SYNTAX PositiveInteger
-+ MAX-ACCESS read-create
-+ STATUS current
-+ DESCRIPTION
-+ "The number of seconds that a router's Hello
-+ packets have not been seen before it's neigh-
-+ bors declare the router down. This should be
-+ some multiple of the Hello interval. This
-+ value must be the same for the virtual neigh-
-+ bor."
-+ DEFVAL { 60 }
-+ ::= { ospfVirtIfEntry 6 }
-+
-+
-+ ospfVirtIfState OBJECT-TYPE
-+ SYNTAX INTEGER {
-+ down (1), -- these use the same encoding
-+ pointToPoint (4) -- as the ospfIfTable
-+ }
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "OSPF virtual interface states."
-+ DEFVAL { down }
-+ ::= { ospfVirtIfEntry 7 }
-+
-+
-+ ospfVirtIfEvents OBJECT-TYPE
-+ SYNTAX Counter32
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "The number of state changes or error events on
-+ this Virtual Link"
-+ ::= { ospfVirtIfEntry 8 }
-+
-+
-+ ospfVirtIfAuthKey OBJECT-TYPE
-+ SYNTAX OCTET STRING (SIZE(0..256))
-+ MAX-ACCESS read-create
-+ STATUS current
-+ DESCRIPTION
-+ "If Authentication Type is simplePassword, the
-+ device will left adjust and zero fill to 8 oc-
-+ tets.
-+
-+ Note that unauthenticated interfaces need no
-+ authentication key, and simple password authen-
-+ tication cannot use a key of more than 8 oc-
-+ tets. Larger keys are useful only with authen-
-+ tication mechanisms not specified in this docu-
-+ ment.
-+
-+ When read, ospfVifAuthKey always returns a
-+ string of length zero."
-+ REFERENCE
-+ "OSPF Version 2, Section 9 The Interface Data
-+ Structure"
-+ DEFVAL { '0000000000000000'H } -- 0.0.0.0.0.0.0.0
-+ ::= { ospfVirtIfEntry 9 }
-+
-+
-+ ospfVirtIfStatus OBJECT-TYPE
-+ SYNTAX RowStatus
-+ MAX-ACCESS read-create
-+ STATUS current
-+ DESCRIPTION
-+ "This variable displays the status of the en-
-+ try. Setting it to 'invalid' has the effect of
-+ rendering it inoperative. The internal effect
-+ (row removal) is implementation dependent."
-+ ::= { ospfVirtIfEntry 10 }
-+
-+
-+ ospfVirtIfAuthType OBJECT-TYPE
-+ SYNTAX INTEGER (0..255)
-+ -- none (0),
-+ -- simplePassword (1)
-+ -- md5 (2)
-+ -- reserved for specification by IANA (> 2)
-+ MAX-ACCESS read-create
-+ STATUS current
-+ DESCRIPTION
-+ "The authentication type specified for a virtu-
-+ al interface. Additional authentication types
-+ may be assigned locally."
-+ REFERENCE
-+ "OSPF Version 2, Appendix E Authentication"
-+ DEFVAL { 0 } -- no authentication, by default
-+ ::= { ospfVirtIfEntry 11 }
-+
-+
-+-- OSPF Neighbor Table
-+
-+-- The OSPF Neighbor Table describes all neighbors in
-+-- the locality of the subject router.
-+
-+ ospfNbrTable OBJECT-TYPE
-+ SYNTAX SEQUENCE OF OspfNbrEntry
-+ MAX-ACCESS not-accessible
-+ STATUS current
-+ DESCRIPTION
-+ "A table of non-virtual neighbor information."
-+ REFERENCE
-+ "OSPF Version 2, Section 10 The Neighbor Data
-+ Structure"
-+ ::= { ospf 10 }
-+
-+
-+ ospfNbrEntry OBJECT-TYPE
-+ SYNTAX OspfNbrEntry
-+ MAX-ACCESS not-accessible
-+ STATUS current
-+ DESCRIPTION
-+ "The information regarding a single neighbor."
-+ REFERENCE
-+ "OSPF Version 2, Section 10 The Neighbor Data
-+ Structure"
-+ INDEX { ospfNbrIpAddr, ospfNbrAddressLessIndex }
-+ ::= { ospfNbrTable 1 }
-+
-+OspfNbrEntry ::=
-+ SEQUENCE {
-+ ospfNbrIpAddr
-+ IpAddress,
-+ ospfNbrAddressLessIndex
-+ InterfaceIndex,
-+ ospfNbrRtrId
-+ RouterID,
-+ ospfNbrOptions
-+ Integer32,
-+ ospfNbrPriority
-+ DesignatedRouterPriority,
-+ ospfNbrState
-+ INTEGER,
-+ ospfNbrEvents
-+ Counter32,
-+ ospfNbrLsRetransQLen
-+ Gauge32,
-+ ospfNbmaNbrStatus
-+ RowStatus,
-+ ospfNbmaNbrPermanence
-+ INTEGER,
-+ ospfNbrHelloSuppressed
-+ TruthValue
-+ }
-+
-+ ospfNbrIpAddr OBJECT-TYPE
-+ SYNTAX IpAddress
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "The IP address this neighbor is using in its
-+ IP Source Address. Note that, on addressless
-+ links, this will not be 0.0.0.0, but the ad-
-+ dress of another of the neighbor's interfaces."
-+ ::= { ospfNbrEntry 1 }
-+
-+
-+ ospfNbrAddressLessIndex OBJECT-TYPE
-+ SYNTAX InterfaceIndex
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "On an interface having an IP Address, zero.
-+ On addressless interfaces, the corresponding
-+ value of ifIndex in the Internet Standard MIB.
-+ On row creation, this can be derived from the
-+ instance."
-+ ::= { ospfNbrEntry 2 }
-+
-+
-+ ospfNbrRtrId OBJECT-TYPE
-+ SYNTAX RouterID
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "A 32-bit integer (represented as a type IpAd-
-+ dress) uniquely identifying the neighboring
-+ router in the Autonomous System."
-+ DEFVAL { '00000000'H } -- 0.0.0.0
-+ ::= { ospfNbrEntry 3 }
-+
-+
-+ ospfNbrOptions OBJECT-TYPE
-+ SYNTAX Integer32
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "A Bit Mask corresponding to the neighbor's op-
-+ tions field.
-+
-+ Bit 0, if set, indicates that the system will
-+ operate on Type of Service metrics other than
-+ TOS 0. If zero, the neighbor will ignore all
-+ metrics except the TOS 0 metric.
-+
-+ Bit 1, if set, indicates that the associated
-+ area accepts and operates on external informa-
-+ tion; if zero, it is a stub area.
-+
-+ Bit 2, if set, indicates that the system is ca-
-+ pable of routing IP Multicast datagrams; i.e.,
-+ that it implements the Multicast Extensions to
-+ OSPF.
-+
-+ Bit 3, if set, indicates that the associated
-+ area is an NSSA. These areas are capable of
-+ carrying type 7 external advertisements, which
-+ are translated into type 5 external advertise-
-+ ments at NSSA borders."
-+ REFERENCE
-+ "OSPF Version 2, Section 12.1.2 Options"
-+ DEFVAL { 0 }
-+ ::= { ospfNbrEntry 4 }
-+
-+
-+ ospfNbrPriority OBJECT-TYPE
-+ SYNTAX DesignatedRouterPriority
-+ MAX-ACCESS read-create
-+ STATUS current
-+ DESCRIPTION
-+ "The priority of this neighbor in the designat-
-+ ed router election algorithm. The value 0 sig-
-+ nifies that the neighbor is not eligible to be-
-+ come the designated router on this particular
-+ network."
-+ DEFVAL { 1 }
-+ ::= { ospfNbrEntry 5 }
-+
-+
-+ ospfNbrState OBJECT-TYPE
-+ SYNTAX INTEGER {
-+ down (1),
-+ attempt (2),
-+ init (3),
-+ twoWay (4),
-+ exchangeStart (5),
-+ exchange (6),
-+ loading (7),
-+ full (8)
-+ }
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "The State of the relationship with this Neigh-
-+ bor."
-+ REFERENCE
-+ "OSPF Version 2, Section 10.1 Neighbor States"
-+ DEFVAL { down }
-+ ::= { ospfNbrEntry 6 }
-+
-+
-+ ospfNbrEvents OBJECT-TYPE
-+ SYNTAX Counter32
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "The number of times this neighbor relationship
-+ has changed state, or an error has occurred."
-+ ::= { ospfNbrEntry 7 }
-+
-+
-+ ospfNbrLsRetransQLen OBJECT-TYPE
-+ SYNTAX Gauge32
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "The current length of the retransmission
-+ queue."
-+ ::= { ospfNbrEntry 8 }
-+
-+
-+ ospfNbmaNbrStatus OBJECT-TYPE
-+ SYNTAX RowStatus
-+ MAX-ACCESS read-create
-+ STATUS current
-+ DESCRIPTION
-+ "This variable displays the status of the en-
-+ try. Setting it to 'invalid' has the effect of
-+ rendering it inoperative. The internal effect
-+ (row removal) is implementation dependent."
-+ ::= { ospfNbrEntry 9 }
-+
-+
-+ ospfNbmaNbrPermanence OBJECT-TYPE
-+ SYNTAX INTEGER {
-+ dynamic (1), -- learned through protocol
-+ permanent (2) -- configured address
-+ }
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "This variable displays the status of the en-
-+ try. 'dynamic' and 'permanent' refer to how
-+ the neighbor became known."
-+ DEFVAL { permanent }
-+ ::= { ospfNbrEntry 10 }
-+
-+
-+ ospfNbrHelloSuppressed OBJECT-TYPE
-+ SYNTAX TruthValue
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "Indicates whether Hellos are being suppressed
-+ to the neighbor"
-+ ::= { ospfNbrEntry 11 }
-+
-+
-+-- OSPF Virtual Neighbor Table
-+
-+-- This table describes all virtual neighbors.
-+-- Since Virtual Links are configured in the
-+-- virtual interface table, this table is read-only.
-+
-+ ospfVirtNbrTable OBJECT-TYPE
-+ SYNTAX SEQUENCE OF OspfVirtNbrEntry
-+ MAX-ACCESS not-accessible
-+ STATUS current
-+ DESCRIPTION
-+ "A table of virtual neighbor information."
-+ REFERENCE
-+ "OSPF Version 2, Section 15 Virtual Links"
-+ ::= { ospf 11 }
-+
-+
-+ ospfVirtNbrEntry OBJECT-TYPE
-+ SYNTAX OspfVirtNbrEntry
-+ MAX-ACCESS not-accessible
-+ STATUS current
-+ DESCRIPTION
-+ "Virtual neighbor information."
-+ INDEX { ospfVirtNbrArea, ospfVirtNbrRtrId }
-+ ::= { ospfVirtNbrTable 1 }
-+
-+OspfVirtNbrEntry ::=
-+ SEQUENCE {
-+ ospfVirtNbrArea
-+ AreaID,
-+ ospfVirtNbrRtrId
-+ RouterID,
-+ ospfVirtNbrIpAddr
-+ IpAddress,
-+ ospfVirtNbrOptions
-+ Integer32,
-+ ospfVirtNbrState
-+ INTEGER,
-+ ospfVirtNbrEvents
-+ Counter32,
-+ ospfVirtNbrLsRetransQLen
-+ Gauge32,
-+ ospfVirtNbrHelloSuppressed
-+ TruthValue
-+ }
-+
-+ ospfVirtNbrArea OBJECT-TYPE
-+ SYNTAX AreaID
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "The Transit Area Identifier."
-+ ::= { ospfVirtNbrEntry 1 }
-+
-+
-+ ospfVirtNbrRtrId OBJECT-TYPE
-+ SYNTAX RouterID
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "A 32-bit integer uniquely identifying the
-+ neighboring router in the Autonomous System."
-+ ::= { ospfVirtNbrEntry 2 }
-+
-+
-+ ospfVirtNbrIpAddr OBJECT-TYPE
-+ SYNTAX IpAddress
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "The IP address this Virtual Neighbor is us-
-+ ing."
-+ ::= { ospfVirtNbrEntry 3 }
-+
-+
-+ ospfVirtNbrOptions OBJECT-TYPE
-+ SYNTAX Integer32
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "A Bit Mask corresponding to the neighbor's op-
-+ tions field.
-+
-+ Bit 1, if set, indicates that the system will
-+ operate on Type of Service metrics other than
-+ TOS 0. If zero, the neighbor will ignore all
-+ metrics except the TOS 0 metric.
-+
-+ Bit 2, if set, indicates that the system is
-+ Network Multicast capable; ie, that it imple-
-+ ments OSPF Multicast Routing."
-+ ::= { ospfVirtNbrEntry 4 }
-+ ospfVirtNbrState OBJECT-TYPE
-+ SYNTAX INTEGER {
-+ down (1),
-+ attempt (2),
-+ init (3),
-+ twoWay (4),
-+ exchangeStart (5),
-+ exchange (6),
-+ loading (7),
-+ full (8)
-+ }
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "The state of the Virtual Neighbor Relation-
-+ ship."
-+ ::= { ospfVirtNbrEntry 5 }
-+
-+
-+ ospfVirtNbrEvents OBJECT-TYPE
-+ SYNTAX Counter32
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "The number of times this virtual link has
-+ changed its state, or an error has occurred."
-+ ::= { ospfVirtNbrEntry 6 }
-+
-+
-+ ospfVirtNbrLsRetransQLen OBJECT-TYPE
-+ SYNTAX Gauge32
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "The current length of the retransmission
-+ queue."
-+ ::= { ospfVirtNbrEntry 7 }
-+
-+
-+ ospfVirtNbrHelloSuppressed OBJECT-TYPE
-+ SYNTAX TruthValue
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "Indicates whether Hellos are being suppressed
-+ to the neighbor"
-+ ::= { ospfVirtNbrEntry 8 }
-+
-+-- OSPF Link State Database, External
-+
-+-- The Link State Database contains the Link State
-+-- Advertisements from throughout the areas that the
-+-- device is attached to.
-+
-+-- This table is identical to the OSPF LSDB Table in
-+-- format, but contains only External Link State
-+-- Advertisements. The purpose is to allow external
-+-- LSAs to be displayed once for the router rather
-+-- than once in each non-stub area.
-+
-+ ospfExtLsdbTable OBJECT-TYPE
-+ SYNTAX SEQUENCE OF OspfExtLsdbEntry
-+ MAX-ACCESS not-accessible
-+ STATUS current
-+ DESCRIPTION
-+ "The OSPF Process's Links State Database."
-+ REFERENCE
-+ "OSPF Version 2, Section 12 Link State Adver-
-+ tisements"
-+ ::= { ospf 12 }
-+
-+
-+ ospfExtLsdbEntry OBJECT-TYPE
-+ SYNTAX OspfExtLsdbEntry
-+ MAX-ACCESS not-accessible
-+ STATUS current
-+ DESCRIPTION
-+ "A single Link State Advertisement."
-+ INDEX { ospfExtLsdbType, ospfExtLsdbLsid, ospfExtLsdbRouterId }
-+ ::= { ospfExtLsdbTable 1 }
-+
-+OspfExtLsdbEntry ::=
-+ SEQUENCE {
-+ ospfExtLsdbType
-+ INTEGER,
-+ ospfExtLsdbLsid
-+ IpAddress,
-+ ospfExtLsdbRouterId
-+ RouterID,
-+ ospfExtLsdbSequence
-+ Integer32,
-+ ospfExtLsdbAge
-+ Integer32,
-+ ospfExtLsdbChecksum
-+ Integer32,
-+ ospfExtLsdbAdvertisement
-+ OCTET STRING
-+ }
-+
-+ ospfExtLsdbType OBJECT-TYPE
-+ SYNTAX INTEGER {
-+ asExternalLink (5)
-+ }
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "The type of the link state advertisement.
-+ Each link state type has a separate advertise-
-+ ment format."
-+ REFERENCE
-+ "OSPF Version 2, Appendix A.4.1 The Link State
-+ Advertisement header"
-+ ::= { ospfExtLsdbEntry 1 }
-+
-+
-+ ospfExtLsdbLsid OBJECT-TYPE
-+ SYNTAX IpAddress
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "The Link State ID is an LS Type Specific field
-+ containing either a Router ID or an IP Address;
-+ it identifies the piece of the routing domain
-+ that is being described by the advertisement."
-+ REFERENCE
-+ "OSPF Version 2, Section 12.1.4 Link State ID"
-+ ::= { ospfExtLsdbEntry 2 }
-+
-+
-+ ospfExtLsdbRouterId OBJECT-TYPE
-+ SYNTAX RouterID
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "The 32 bit number that uniquely identifies the
-+ originating router in the Autonomous System."
-+ REFERENCE
-+ "OSPF Version 2, Appendix C.1 Global parameters"
-+ ::= { ospfExtLsdbEntry 3 }
-+
-+-- Note that the OSPF Sequence Number is a 32 bit signed
-+-- integer. It starts with the value '80000001'h,
-+-- or -'7FFFFFFF'h, and increments until '7FFFFFFF'h
-+-- Thus, a typical sequence number will be very negative.
-+ ospfExtLsdbSequence OBJECT-TYPE
-+ SYNTAX Integer32
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "The sequence number field is a signed 32-bit
-+ integer. It is used to detect old and dupli-
-+ cate link state advertisements. The space of
-+ sequence numbers is linearly ordered. The
-+ larger the sequence number the more recent the
-+ advertisement."
-+ REFERENCE
-+ "OSPF Version 2, Section 12.1.6 LS sequence
-+ number"
-+ ::= { ospfExtLsdbEntry 4 }
-+
-+
-+ ospfExtLsdbAge OBJECT-TYPE
-+ SYNTAX Integer32 -- Should be 0..MaxAge
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "This field is the age of the link state adver-
-+ tisement in seconds."
-+ REFERENCE
-+ "OSPF Version 2, Section 12.1.1 LS age"
-+ ::= { ospfExtLsdbEntry 5 }
-+
-+
-+ ospfExtLsdbChecksum OBJECT-TYPE
-+ SYNTAX Integer32
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "This field is the checksum of the complete
-+ contents of the advertisement, excepting the
-+ age field. The age field is excepted so that
-+ an advertisement's age can be incremented
-+ without updating the checksum. The checksum
-+ used is the same that is used for ISO connec-
-+ tionless datagrams; it is commonly referred to
-+ as the Fletcher checksum."
-+ REFERENCE
-+ "OSPF Version 2, Section 12.1.7 LS checksum"
-+ ::= { ospfExtLsdbEntry 6 }
-+
-+
-+ ospfExtLsdbAdvertisement OBJECT-TYPE
-+ SYNTAX OCTET STRING (SIZE(36))
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "The entire Link State Advertisement, including
-+ its header."
-+ REFERENCE
-+ "OSPF Version 2, Section 12 Link State Adver-
-+ tisements"
-+ ::= { ospfExtLsdbEntry 7 }
-+
-+
-+-- OSPF Use of the CIDR Route Table
-+
-+ospfRouteGroup OBJECT IDENTIFIER ::= { ospf 13 }
-+
-+-- The IP Forwarding Table defines a number of objects for use by
-+-- the routing protocol to externalize its information. Most of
-+-- the variables (ipForwardDest, ipForwardMask, ipForwardPolicy,
-+-- ipForwardNextHop, ipForwardIfIndex, ipForwardType,
-+-- ipForwardProto, ipForwardAge, and ipForwardNextHopAS) are
-+-- defined there.
-+
-+-- Those that leave some discretion are defined here.
-+
-+-- ipCidrRouteProto is, of course, ospf (13).
-+
-+-- ipCidrRouteAge is the time since the route was first calculated,
-+-- as opposed to the time since the last SPF run.
-+
-+-- ipCidrRouteInfo is an OBJECT IDENTIFIER for use by the routing
-+-- protocol. The following values shall be found there depending
-+-- on the way the route was calculated.
-+
-+ospfIntraArea OBJECT IDENTIFIER ::= { ospfRouteGroup 1 }
-+ospfInterArea OBJECT IDENTIFIER ::= { ospfRouteGroup 2 }
-+ospfExternalType1 OBJECT IDENTIFIER ::= { ospfRouteGroup 3 }
-+ospfExternalType2 OBJECT IDENTIFIER ::= { ospfRouteGroup 4 }
-+
-+-- ipCidrRouteMetric1 is, by definition, the primary routing
-+-- metric. Therefore, it should be the metric that route
-+-- selection is based on. For intra-area and inter-area routes,
-+-- it is an OSPF metric. For External Type 1 (comparable value)
-+-- routes, it is an OSPF metric plus the External Metric. For
-+-- external Type 2 (non-comparable value) routes, it is the
-+-- external metric.
-+
-+-- ipCidrRouteMetric2 is, by definition, a secondary routing
-+-- metric. Therefore, it should be the metric that breaks a tie
-+-- among routes having equal metric1 values and the same
-+-- calculation rule. For intra-area, inter-area routes, and
-+-- External Type 1 (comparable value) routes, it is unused. For
-+-- external Type 2 (non-comparable value) routes, it is the metric
-+-- to the AS border router.
-+
-+-- ipCidrRouteMetric3, ipCidrRouteMetric4, and ipCidrRouteMetric5 are
-+-- unused.
-+
-+--
-+-- The OSPF Area Aggregate Table
-+--
-+-- This table replaces the OSPF Area Summary Table, being an
-+-- extension of that for CIDR routers.
-+
-+ ospfAreaAggregateTable OBJECT-TYPE
-+ SYNTAX SEQUENCE OF OspfAreaAggregateEntry
-+ MAX-ACCESS not-accessible
-+ STATUS current
-+ DESCRIPTION
-+ "A range of IP addresses specified by an IP
-+ address/IP network mask pair. For example,
-+ class B address range of X.X.X.X with a network
-+ mask of 255.255.0.0 includes all IP addresses
-+ from X.X.0.0 to X.X.255.255. Note that if
-+ ranges are configured such that one range sub-
-+ sumes another range (e.g., 10.0.0.0 mask
-+ 255.0.0.0 and 10.1.0.0 mask 255.255.0.0), the
-+ most specific match is the preferred one."
-+ REFERENCE
-+ "OSPF Version 2, Appendix C.2 Area parameters"
-+ ::= { ospf 14 }
-+
-+
-+ ospfAreaAggregateEntry OBJECT-TYPE
-+ SYNTAX OspfAreaAggregateEntry
-+ MAX-ACCESS not-accessible
-+ STATUS current
-+ DESCRIPTION
-+ "A range of IP addresses specified by an IP
-+ address/IP network mask pair. For example,
-+ class B address range of X.X.X.X with a network
-+ mask of 255.255.0.0 includes all IP addresses
-+ from X.X.0.0 to X.X.255.255. Note that if
-+ ranges are range configured such that one range
-+ subsumes another range (e.g., 10.0.0.0 mask
-+ 255.0.0.0 and 10.1.0.0 mask 255.255.0.0), the
-+ most specific match is the preferred one."
-+ REFERENCE
-+ "OSPF Version 2, Appendix C.2 Area parameters"
-+ INDEX { ospfAreaAggregateAreaID, ospfAreaAggregateLsdbType,
-+ ospfAreaAggregateNet, ospfAreaAggregateMask }
-+ ::= { ospfAreaAggregateTable 1 }
-+
-+
-+OspfAreaAggregateEntry ::=
-+ SEQUENCE {
-+ ospfAreaAggregateAreaID
-+ AreaID,
-+ ospfAreaAggregateLsdbType
-+ INTEGER,
-+ ospfAreaAggregateNet
-+ IpAddress,
-+ ospfAreaAggregateMask
-+ IpAddress,
-+ ospfAreaAggregateStatus
-+ RowStatus,
-+ ospfAreaAggregateEffect
-+ INTEGER
-+ }
-+
-+ ospfAreaAggregateAreaID OBJECT-TYPE
-+ SYNTAX AreaID
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "The Area the Address Aggregate is to be found
-+ within."
-+ REFERENCE
-+ "OSPF Version 2, Appendix C.2 Area parameters"
-+ ::= { ospfAreaAggregateEntry 1 }
-+
-+
-+ ospfAreaAggregateLsdbType OBJECT-TYPE
-+ SYNTAX INTEGER {
-+ summaryLink (3),
-+ nssaExternalLink (7)
-+ }
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "The type of the Address Aggregate. This field
-+ specifies the Lsdb type that this Address Ag-
-+ gregate applies to."
-+ REFERENCE
-+ "OSPF Version 2, Appendix A.4.1 The Link State
-+ Advertisement header"
-+ ::= { ospfAreaAggregateEntry 2 }
-+
-+
-+ ospfAreaAggregateNet OBJECT-TYPE
-+ SYNTAX IpAddress
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "The IP Address of the Net or Subnet indicated
-+ by the range."
-+ REFERENCE
-+ "OSPF Version 2, Appendix C.2 Area parameters"
-+ ::= { ospfAreaAggregateEntry 3 }
-+
-+
-+ ospfAreaAggregateMask OBJECT-TYPE
-+ SYNTAX IpAddress
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "The Subnet Mask that pertains to the Net or
-+ Subnet."
-+ REFERENCE
-+ "OSPF Version 2, Appendix C.2 Area parameters"
-+ ::= { ospfAreaAggregateEntry 4 }
-+
-+
-+ ospfAreaAggregateStatus OBJECT-TYPE
-+ SYNTAX RowStatus
-+ MAX-ACCESS read-create
-+ STATUS current
-+ DESCRIPTION
-+ "This variable displays the status of the en-
-+ try. Setting it to 'invalid' has the effect of
-+ rendering it inoperative. The internal effect
-+ (row removal) is implementation dependent."
-+ ::= { ospfAreaAggregateEntry 5 }
-+
-+
-+ ospfAreaAggregateEffect OBJECT-TYPE
-+ SYNTAX INTEGER {
-+ advertiseMatching (1),
-+ doNotAdvertiseMatching (2)
-+ }
-+ MAX-ACCESS read-create
-+ STATUS current
-+ DESCRIPTION
-+ "Subnets subsumed by ranges either trigger the
-+ advertisement of the indicated aggregate (ad-
-+ vertiseMatching), or result in the subnet's not
-+ being advertised at all outside the area."
-+ DEFVAL { advertiseMatching }
-+ ::= { ospfAreaAggregateEntry 6 }
-+
-+
-+-- conformance information
-+
-+ospfConformance OBJECT IDENTIFIER ::= { ospf 15 }
-+
-+ospfGroups OBJECT IDENTIFIER ::= { ospfConformance 1 }
-+ospfCompliances OBJECT IDENTIFIER ::= { ospfConformance 2 }
-+
-+-- compliance statements
-+
-+ ospfCompliance MODULE-COMPLIANCE
-+ STATUS current
-+ DESCRIPTION
-+ "The compliance statement "
-+ MODULE -- this module
-+ MANDATORY-GROUPS {
-+ ospfBasicGroup,
-+ ospfAreaGroup,
-+ ospfStubAreaGroup,
-+ ospfIfGroup,
-+ ospfIfMetricGroup,
-+ ospfVirtIfGroup,
-+ ospfNbrGroup,
-+ ospfVirtNbrGroup,
-+ ospfAreaAggregateGroup
-+ }
-+ ::= { ospfCompliances 1 }
-+
-+
-+-- units of conformance
-+
-+ ospfBasicGroup OBJECT-GROUP
-+ OBJECTS {
-+ ospfRouterId,
-+ ospfAdminStat,
-+ ospfVersionNumber,
-+ ospfAreaBdrRtrStatus,
-+ ospfASBdrRtrStatus,
-+ ospfExternLsaCount,
-+ ospfExternLsaCksumSum,
-+ ospfTOSSupport,
-+ ospfOriginateNewLsas,
-+ ospfRxNewLsas,
-+ ospfExtLsdbLimit,
-+ ospfMulticastExtensions,
-+ ospfExitOverflowInterval,
-+ ospfDemandExtensions
-+ }
-+ STATUS current
-+ DESCRIPTION
-+ "These objects are required for OSPF systems."
-+ ::= { ospfGroups 1 }
-+
-+
-+ ospfAreaGroup OBJECT-GROUP
-+ OBJECTS {
-+ ospfAreaId,
-+ ospfImportAsExtern,
-+ ospfSpfRuns,
-+ ospfAreaBdrRtrCount,
-+ ospfAsBdrRtrCount,
-+ ospfAreaLsaCount,
-+ ospfAreaLsaCksumSum,
-+ ospfAreaSummary,
-+ ospfAreaStatus
-+ }
-+ STATUS current
-+ DESCRIPTION
-+ "These objects are required for OSPF systems
-+ supporting areas."
-+ ::= { ospfGroups 2 }
-+
-+
-+ ospfStubAreaGroup OBJECT-GROUP
-+ OBJECTS {
-+ ospfStubAreaId,
-+ ospfStubTOS,
-+ ospfStubMetric,
-+ ospfStubStatus,
-+ ospfStubMetricType
-+ }
-+ STATUS current
-+ DESCRIPTION
-+ "These objects are required for OSPF systems
-+ supporting stub areas."
-+ ::= { ospfGroups 3 }
-+
-+
-+ ospfLsdbGroup OBJECT-GROUP
-+ OBJECTS {
-+ ospfLsdbAreaId,
-+ ospfLsdbType,
-+ ospfLsdbLsid,
-+ ospfLsdbRouterId,
-+ ospfLsdbSequence,
-+ ospfLsdbAge,
-+ ospfLsdbChecksum,
-+ ospfLsdbAdvertisement
-+ }
-+ STATUS current
-+ DESCRIPTION
-+ "These objects are required for OSPF systems
-+ that display their link state database."
-+ ::= { ospfGroups 4 }
-+
-+
-+ ospfAreaRangeGroup OBJECT-GROUP
-+ OBJECTS {
-+ ospfAreaRangeAreaId,
-+ ospfAreaRangeNet,
-+ ospfAreaRangeMask,
-+ ospfAreaRangeStatus,
-+ ospfAreaRangeEffect
-+ }
-+ STATUS obsolete
-+ DESCRIPTION
-+ "These objects are required for non-CIDR OSPF
-+ systems that support multiple areas."
-+ ::= { ospfGroups 5 }
-+
-+
-+ ospfHostGroup OBJECT-GROUP
-+ OBJECTS {
-+ ospfHostIpAddress,
-+ ospfHostTOS,
-+ ospfHostMetric,
-+ ospfHostStatus,
-+ ospfHostAreaID
-+ }
-+ STATUS current
-+ DESCRIPTION
-+ "These objects are required for OSPF systems
-+ that support attached hosts."
-+ ::= { ospfGroups 6 }
-+
-+
-+ ospfIfGroup OBJECT-GROUP
-+ OBJECTS {
-+ ospfIfIpAddress,
-+ ospfAddressLessIf,
-+ ospfIfAreaId,
-+ ospfIfType,
-+ ospfIfAdminStat,
-+ ospfIfRtrPriority,
-+ ospfIfTransitDelay,
-+ ospfIfRetransInterval,
-+ ospfIfHelloInterval,
-+ ospfIfRtrDeadInterval,
-+ ospfIfPollInterval,
-+ ospfIfState,
-+ ospfIfDesignatedRouter,
-+ ospfIfBackupDesignatedRouter,
-+ ospfIfEvents,
-+ ospfIfAuthType,
-+ ospfIfAuthKey,
-+ ospfIfStatus,
-+ ospfIfMulticastForwarding,
-+ ospfIfDemand
-+ }
-+ STATUS current
-+ DESCRIPTION
-+ "These objects are required for OSPF systems."
-+ ::= { ospfGroups 7 }
-+
-+
-+ ospfIfMetricGroup OBJECT-GROUP
-+ OBJECTS {
-+ ospfIfMetricIpAddress,
-+ ospfIfMetricAddressLessIf,
-+ ospfIfMetricTOS,
-+ ospfIfMetricValue,
-+ ospfIfMetricStatus
-+ }
-+ STATUS current
-+ DESCRIPTION
-+ "These objects are required for OSPF systems."
-+ ::= { ospfGroups 8 }
-+
-+
-+ ospfVirtIfGroup OBJECT-GROUP
-+ OBJECTS {
-+ ospfVirtIfAreaId,
-+ ospfVirtIfNeighbor,
-+ ospfVirtIfTransitDelay,
-+ ospfVirtIfRetransInterval,
-+ ospfVirtIfHelloInterval,
-+ ospfVirtIfRtrDeadInterval,
-+ ospfVirtIfState,
-+ ospfVirtIfEvents,
-+ ospfVirtIfAuthType,
-+ ospfVirtIfAuthKey,
-+ ospfVirtIfStatus
-+ }
-+ STATUS current
-+ DESCRIPTION
-+ "These objects are required for OSPF systems."
-+ ::= { ospfGroups 9 }
-+
-+
-+ ospfNbrGroup OBJECT-GROUP
-+ OBJECTS {
-+ ospfNbrIpAddr,
-+ ospfNbrAddressLessIndex,
-+ ospfNbrRtrId,
-+ ospfNbrOptions,
-+ ospfNbrPriority,
-+ ospfNbrState,
-+ ospfNbrEvents,
-+ ospfNbrLsRetransQLen,
-+ ospfNbmaNbrStatus,
-+ ospfNbmaNbrPermanence,
-+ ospfNbrHelloSuppressed
-+ }
-+ STATUS current
-+ DESCRIPTION
-+ "These objects are required for OSPF systems."
-+ ::= { ospfGroups 10 }
-+
-+
-+ ospfVirtNbrGroup OBJECT-GROUP
-+ OBJECTS {
-+ ospfVirtNbrArea,
-+ ospfVirtNbrRtrId,
-+ ospfVirtNbrIpAddr,
-+ ospfVirtNbrOptions,
-+ ospfVirtNbrState,
-+ ospfVirtNbrEvents,
-+ ospfVirtNbrLsRetransQLen,
-+ ospfVirtNbrHelloSuppressed
-+ }
-+ STATUS current
-+ DESCRIPTION
-+ "These objects are required for OSPF systems."
-+ ::= { ospfGroups 11 }
-+
-+
-+ ospfExtLsdbGroup OBJECT-GROUP
-+ OBJECTS {
-+ ospfExtLsdbType,
-+ ospfExtLsdbLsid,
-+ ospfExtLsdbRouterId,
-+ ospfExtLsdbSequence,
-+ ospfExtLsdbAge,
-+ ospfExtLsdbChecksum,
-+ ospfExtLsdbAdvertisement
-+ }
-+ STATUS current
-+ DESCRIPTION
-+ "These objects are required for OSPF systems
-+ that display their link state database."
-+ ::= { ospfGroups 12 }
-+
-+
-+ ospfAreaAggregateGroup OBJECT-GROUP
-+ OBJECTS {
-+ ospfAreaAggregateAreaID,
-+ ospfAreaAggregateLsdbType,
-+ ospfAreaAggregateNet,
-+ ospfAreaAggregateMask,
-+ ospfAreaAggregateStatus,
-+ ospfAreaAggregateEffect
-+ }
-+ STATUS current
-+ DESCRIPTION
-+ "These objects are required for OSPF systems."
-+ ::= { ospfGroups 13 }
-+
-+END
-diff -ruN net-snmp-5.4.1.orig/mibs/OSPF-TRAP-MIB.txt net-snmp-5.4.1/mibs/OSPF-TRAP-MIB.txt
---- net-snmp-5.4.1.orig/mibs/OSPF-TRAP-MIB.txt 1970-01-01 01:00:00.000000000 +0100
-+++ net-snmp-5.4.1/mibs/OSPF-TRAP-MIB.txt 2007-09-20 16:30:52.000000000 +0200
-@@ -0,0 +1,443 @@
-+OSPF-TRAP-MIB DEFINITIONS ::= BEGIN
-+
-+ IMPORTS
-+ MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE, IpAddress
-+ FROM SNMPv2-SMI
-+ MODULE-COMPLIANCE, OBJECT-GROUP
-+ FROM SNMPv2-CONF
-+ ospfRouterId, ospfIfIpAddress, ospfAddressLessIf, ospfIfState,
-+ ospfVirtIfAreaId, ospfVirtIfNeighbor, ospfVirtIfState,
-+ ospfNbrIpAddr, ospfNbrAddressLessIndex, ospfNbrRtrId,
-+ ospfNbrState, ospfVirtNbrArea, ospfVirtNbrRtrId, ospfVirtNbrState,
-+ ospfLsdbType, ospfLsdbLsid, ospfLsdbRouterId, ospfLsdbAreaId,
-+ ospfExtLsdbLimit, ospf
-+ FROM OSPF-MIB;
-+
-+ ospfTrap MODULE-IDENTITY
-+ LAST-UPDATED "9501201225Z" -- Fri Jan 20 12:25:50 PST 1995
-+ ORGANIZATION "IETF OSPF Working Group"
-+ CONTACT-INFO
-+ " Fred Baker
-+ Postal: Cisco Systems
-+ 519 Lado Drive
-+ Santa Barbara, California 93111
-+ Tel: +1 805 681 0115
-+ E-Mail: fred at cisco.com
-+
-+ Rob Coltun
-+ Postal: RainbowBridge Communications
-+ Tel: (301) 340-9416
-+ E-Mail: rcoltun at rainbow-bridge.com"
-+ DESCRIPTION
-+ "The MIB module to describe traps for the OSPF
-+ Version 2 Protocol."
-+ ::= { ospf 16 }
-+
-+-- Trap Support Objects
-+
-+-- The following are support objects for the OSPF traps.
-+
-+ospfTrapControl OBJECT IDENTIFIER ::= { ospfTrap 1 }
-+ospfTraps OBJECT IDENTIFIER ::= { ospfTrap 2 }
-+
-+ ospfSetTrap OBJECT-TYPE
-+ SYNTAX OCTET STRING (SIZE(4))
-+ MAX-ACCESS read-write
-+ STATUS current
-+ DESCRIPTION
-+ "A four-octet string serving as a bit map for
-+ the trap events defined by the OSPF traps. This
-+ object is used to enable and disable specific
-+ OSPF traps where a 1 in the bit field
-+ represents enabled. The right-most bit (least
-+ significant) represents trap 0."
-+ ::= { ospfTrapControl 1 }
-+
-+
-+ ospfConfigErrorType OBJECT-TYPE
-+ SYNTAX INTEGER {
-+ badVersion (1),
-+ areaMismatch (2),
-+ unknownNbmaNbr (3), -- Router is Dr eligible
-+ unknownVirtualNbr (4),
-+ authTypeMismatch(5),
-+ authFailure (6),
-+ netMaskMismatch (7),
-+ helloIntervalMismatch (8),
-+ deadIntervalMismatch (9),
-+ optionMismatch (10) }
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "Potential types of configuration conflicts.
-+ Used by the ospfConfigError and ospfConfigVir-
-+ tError traps."
-+ ::= { ospfTrapControl 2 }
-+
-+
-+ ospfPacketType OBJECT-TYPE
-+ SYNTAX INTEGER {
-+ hello (1),
-+ dbDescript (2),
-+ lsReq (3),
-+ lsUpdate (4),
-+ lsAck (5) }
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "OSPF packet types."
-+ ::= { ospfTrapControl 3 }
-+
-+
-+ ospfPacketSrc OBJECT-TYPE
-+ SYNTAX IpAddress
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "The IP address of an inbound packet that can-
-+ not be identified by a neighbor instance."
-+ ::= { ospfTrapControl 4 }
-+
-+
-+-- Traps
-+
-+
-+ ospfIfStateChange NOTIFICATION-TYPE
-+ OBJECTS {
-+ ospfRouterId, -- The originator of the trap
-+ ospfIfIpAddress,
-+ ospfAddressLessIf,
-+ ospfIfState -- The new state
-+ }
-+ STATUS current
-+ DESCRIPTION
-+ "An ospfIfStateChange trap signifies that there
-+ has been a change in the state of a non-virtual
-+ OSPF interface. This trap should be generated
-+ when the interface state regresses (e.g., goes
-+ from Dr to Down) or progresses to a terminal
-+ state (i.e., Point-to-Point, DR Other, Dr, or
-+ Backup)."
-+ ::= { ospfTraps 16 }
-+
-+
-+ ospfVirtIfStateChange NOTIFICATION-TYPE
-+ OBJECTS {
-+ ospfRouterId, -- The originator of the trap
-+ ospfVirtIfAreaId,
-+ ospfVirtIfNeighbor,
-+ ospfVirtIfState -- The new state
-+ }
-+ STATUS current
-+ DESCRIPTION
-+ "An ospfIfStateChange trap signifies that there
-+ has been a change in the state of an OSPF vir-
-+ tual interface.
-+ This trap should be generated when the inter-
-+ face state regresses (e.g., goes from Point-
-+ to-Point to Down) or progresses to a terminal
-+ state (i.e., Point-to-Point)."
-+ ::= { ospfTraps 1 }
-+
-+
-+ ospfNbrStateChange NOTIFICATION-TYPE
-+ OBJECTS {
-+ ospfRouterId, -- The originator of the trap
-+ ospfNbrIpAddr,
-+ ospfNbrAddressLessIndex,
-+ ospfNbrRtrId,
-+ ospfNbrState -- The new state
-+ }
-+ STATUS current
-+ DESCRIPTION
-+ "An ospfNbrStateChange trap signifies that
-+ there has been a change in the state of a non-
-+ virtual OSPF neighbor. This trap should be
-+ generated when the neighbor state regresses
-+ (e.g., goes from Attempt or Full to 1-Way or
-+ Down) or progresses to a terminal state (e.g.,
-+ 2-Way or Full). When an neighbor transitions
-+ from or to Full on non-broadcast multi-access
-+ and broadcast networks, the trap should be gen-
-+ erated by the designated router. A designated
-+ router transitioning to Down will be noted by
-+ ospfIfStateChange."
-+ ::= { ospfTraps 2 }
-+
-+
-+ ospfVirtNbrStateChange NOTIFICATION-TYPE
-+ OBJECTS {
-+ ospfRouterId, -- The originator of the trap
-+ ospfVirtNbrArea,
-+ ospfVirtNbrRtrId,
-+ ospfVirtNbrState -- The new state
-+ }
-+ STATUS current
-+ DESCRIPTION
-+ "An ospfIfStateChange trap signifies that there
-+ has been a change in the state of an OSPF vir-
-+ tual neighbor. This trap should be generated
-+ when the neighbor state regresses (e.g., goes
-+ from Attempt or Full to 1-Way or Down) or
-+ progresses to a terminal state (e.g., Full)."
-+ ::= { ospfTraps 3 }
-+ ospfIfConfigError NOTIFICATION-TYPE
-+ OBJECTS {
-+ ospfRouterId, -- The originator of the trap
-+ ospfIfIpAddress,
-+ ospfAddressLessIf,
-+ ospfPacketSrc, -- The source IP address
-+ ospfConfigErrorType, -- Type of error
-+ ospfPacketType
-+ }
-+ STATUS current
-+ DESCRIPTION
-+ "An ospfIfConfigError trap signifies that a
-+ packet has been received on a non-virtual in-
-+ terface from a router whose configuration
-+ parameters conflict with this router's confi-
-+ guration parameters. Note that the event op-
-+ tionMismatch should cause a trap only if it
-+ prevents an adjacency from forming."
-+ ::= { ospfTraps 4 }
-+
-+
-+ ospfVirtIfConfigError NOTIFICATION-TYPE
-+ OBJECTS {
-+ ospfRouterId, -- The originator of the trap
-+ ospfVirtIfAreaId,
-+ ospfVirtIfNeighbor,
-+ ospfConfigErrorType, -- Type of error
-+ ospfPacketType
-+ }
-+ STATUS current
-+ DESCRIPTION
-+ "An ospfConfigError trap signifies that a pack-
-+ et has been received on a virtual interface
-+ from a router whose configuration parameters
-+ conflict with this router's configuration
-+ parameters. Note that the event optionMismatch
-+ should cause a trap only if it prevents an ad-
-+ jacency from forming."
-+ ::= { ospfTraps 5 }
-+
-+
-+ ospfIfAuthFailure NOTIFICATION-TYPE
-+ OBJECTS {
-+ ospfRouterId, -- The originator of the trap
-+ ospfIfIpAddress,
-+ ospfAddressLessIf,
-+ ospfPacketSrc, -- The source IP address
-+ ospfConfigErrorType, -- authTypeMismatch or
-+ -- authFailure
-+ ospfPacketType
-+ }
-+ STATUS current
-+ DESCRIPTION
-+ "An ospfIfAuthFailure trap signifies that a
-+ packet has been received on a non-virtual in-
-+ terface from a router whose authentication key
-+ or authentication type conflicts with this
-+ router's authentication key or authentication
-+ type."
-+ ::= { ospfTraps 6 }
-+
-+
-+ ospfVirtIfAuthFailure NOTIFICATION-TYPE
-+ OBJECTS {
-+ ospfRouterId, -- The originator of the trap
-+ ospfVirtIfAreaId,
-+ ospfVirtIfNeighbor,
-+ ospfConfigErrorType, -- authTypeMismatch or
-+ -- authFailure
-+ ospfPacketType
-+ }
-+ STATUS current
-+ DESCRIPTION
-+ "An ospfVirtIfAuthFailure trap signifies that a
-+ packet has been received on a virtual interface
-+ from a router whose authentication key or au-
-+ thentication type conflicts with this router's
-+ authentication key or authentication type."
-+ ::= { ospfTraps 7 }
-+
-+
-+ ospfIfRxBadPacket NOTIFICATION-TYPE
-+ OBJECTS {
-+ ospfRouterId, -- The originator of the trap
-+ ospfIfIpAddress,
-+ ospfAddressLessIf,
-+ ospfPacketSrc, -- The source IP address
-+ ospfPacketType
-+ }
-+ STATUS current
-+ DESCRIPTION
-+ "An ospfIfRxBadPacket trap signifies that an
-+ OSPF packet has been received on a non-virtual
-+ interface that cannot be parsed."
-+ ::= { ospfTraps 8 }
-+
-+ ospfVirtIfRxBadPacket NOTIFICATION-TYPE
-+ OBJECTS {
-+ ospfRouterId, -- The originator of the trap
-+ ospfVirtIfAreaId,
-+ ospfVirtIfNeighbor,
-+ ospfPacketType
-+ }
-+ STATUS current
-+ DESCRIPTION
-+ "An ospfRxBadPacket trap signifies that an OSPF
-+ packet has been received on a virtual interface
-+ that cannot be parsed."
-+ ::= { ospfTraps 9 }
-+
-+
-+ ospfTxRetransmit NOTIFICATION-TYPE
-+ OBJECTS {
-+ ospfRouterId, -- The originator of the trap
-+ ospfIfIpAddress,
-+ ospfAddressLessIf,
-+ ospfNbrRtrId, -- Destination
-+ ospfPacketType,
-+ ospfLsdbType,
-+ ospfLsdbLsid,
-+ ospfLsdbRouterId
-+ }
-+ STATUS current
-+ DESCRIPTION
-+ "An ospfTxRetransmit trap signifies than an
-+ OSPF packet has been retransmitted on a non-
-+ virtual interface. All packets that may be re-
-+ transmitted are associated with an LSDB entry.
-+ The LS type, LS ID, and Router ID are used to
-+ identify the LSDB entry."
-+ ::= { ospfTraps 10 }
-+
-+
-+ ospfVirtIfTxRetransmit NOTIFICATION-TYPE
-+ OBJECTS {
-+ ospfRouterId, -- The originator of the trap
-+ ospfVirtIfAreaId,
-+ ospfVirtIfNeighbor,
-+ ospfPacketType,
-+ ospfLsdbType,
-+ ospfLsdbLsid,
-+ ospfLsdbRouterId
-+ }
-+ STATUS current
-+ DESCRIPTION
-+ "An ospfTxRetransmit trap signifies than an
-+ OSPF packet has been retransmitted on a virtual
-+ interface. All packets that may be retransmit-
-+ ted are associated with an LSDB entry. The LS
-+ type, LS ID, and Router ID are used to identify
-+ the LSDB entry."
-+ ::= { ospfTraps 11 }
-+
-+
-+ ospfOriginateLsa NOTIFICATION-TYPE
-+ OBJECTS {
-+ ospfRouterId, -- The originator of the trap
-+ ospfLsdbAreaId, -- 0.0.0.0 for AS Externals
-+ ospfLsdbType,
-+ ospfLsdbLsid,
-+ ospfLsdbRouterId
-+ }
-+ STATUS current
-+ DESCRIPTION
-+ "An ospfOriginateLsa trap signifies that a new
-+ LSA has been originated by this router. This
-+ trap should not be invoked for simple refreshes
-+ of LSAs (which happesn every 30 minutes), but
-+ instead will only be invoked when an LSA is
-+ (re)originated due to a topology change. Addi-
-+ tionally, this trap does not include LSAs that
-+ are being flushed because they have reached
-+ MaxAge."
-+ ::= { ospfTraps 12 }
-+
-+
-+ ospfMaxAgeLsa NOTIFICATION-TYPE
-+ OBJECTS {
-+ ospfRouterId, -- The originator of the trap
-+ ospfLsdbAreaId, -- 0.0.0.0 for AS Externals
-+ ospfLsdbType,
-+ ospfLsdbLsid,
-+ ospfLsdbRouterId
-+ }
-+ STATUS current
-+ DESCRIPTION
-+ "An ospfMaxAgeLsa trap signifies that one of
-+ the LSA in the router's link-state database has
-+ aged to MaxAge."
-+ ::= { ospfTraps 13 }
-+
-+
-+ ospfLsdbOverflow NOTIFICATION-TYPE
-+ OBJECTS {
-+ ospfRouterId, -- The originator of the trap
-+ ospfExtLsdbLimit
-+ }
-+ STATUS current
-+ DESCRIPTION
-+ "An ospfLsdbOverflow trap signifies that the
-+ number of LSAs in the router's link-state data-
-+ base has exceeded ospfExtLsdbLimit."
-+ ::= { ospfTraps 14 }
-+
-+
-+ ospfLsdbApproachingOverflow NOTIFICATION-TYPE
-+ OBJECTS {
-+ ospfRouterId, -- The originator of the trap
-+ ospfExtLsdbLimit
-+ }
-+ STATUS current
-+ DESCRIPTION
-+ "An ospfLsdbApproachingOverflow trap signifies
-+ that the number of LSAs in the router's link-
-+ state database has exceeded ninety percent of
-+ ospfExtLsdbLimit."
-+ ::= { ospfTraps 15 }
-+
-+
-+-- conformance information
-+
-+ospfTrapConformance OBJECT IDENTIFIER ::= { ospfTrap 3 }
-+
-+ospfTrapGroups OBJECT IDENTIFIER ::= { ospfTrapConformance 1 }
-+ospfTrapCompliances OBJECT IDENTIFIER ::= { ospfTrapConformance 2 }
-+
-+-- compliance statements
-+
-+ ospfTrapCompliance MODULE-COMPLIANCE
-+ STATUS current
-+ DESCRIPTION
-+ "The compliance statement "
-+ MODULE -- this module
-+ MANDATORY-GROUPS { ospfTrapControlGroup }
-+
-+
-+ GROUP ospfTrapControlGroup
-+ DESCRIPTION
-+ "This group is optional but recommended for all
-+ OSPF systems"
-+ ::= { ospfTrapCompliances 1 }
-+
-+
-+-- units of conformance
-+
-+ ospfTrapControlGroup OBJECT-GROUP
-+ OBJECTS {
-+ ospfSetTrap,
-+ ospfConfigErrorType,
-+ ospfPacketType,
-+ ospfPacketSrc
-+ }
-+ STATUS current
-+ DESCRIPTION
-+ "These objects are required to control traps
-+ from OSPF systems."
-+ ::= { ospfTrapGroups 1 }
-+
-+
-+END
-diff -ruN net-snmp-5.4.1.orig/mibs/RIPv2-MIB.txt net-snmp-5.4.1/mibs/RIPv2-MIB.txt
---- net-snmp-5.4.1.orig/mibs/RIPv2-MIB.txt 1970-01-01 01:00:00.000000000 +0100
-+++ net-snmp-5.4.1/mibs/RIPv2-MIB.txt 2007-09-20 16:30:52.000000000 +0200
-@@ -0,0 +1,530 @@
-+ RIPv2-MIB DEFINITIONS ::= BEGIN
-+
-+ IMPORTS
-+ MODULE-IDENTITY, OBJECT-TYPE, Counter32,
-+ TimeTicks, IpAddress FROM SNMPv2-SMI
-+ TEXTUAL-CONVENTION, RowStatus FROM SNMPv2-TC
-+ MODULE-COMPLIANCE, OBJECT-GROUP FROM SNMPv2-CONF
-+ mib-2 FROM RFC1213-MIB;
-+
-+ -- This MIB module uses the extended OBJECT-TYPE macro as
-+ -- defined in [9].
-+
-+ rip2 MODULE-IDENTITY
-+ LAST-UPDATED "9407272253Z" -- Wed Jul 27 22:53:04 PDT 1994
-+ ORGANIZATION "IETF RIP-II Working Group"
-+ CONTACT-INFO
-+ " Fred Baker
-+ Postal: Cisco Systems
-+ 519 Lado Drive
-+ Santa Barbara, California 93111
-+ Tel: +1 805 681 0115
-+ E-Mail: fbaker at cisco.com
-+
-+ Postal: Gary Malkin
-+ Xylogics, Inc.
-+ 53 Third Avenue
-+ Burlington, MA 01803
-+
-+ Phone: (617) 272-8140
-+ EMail: gmalkin at Xylogics.COM"
-+ DESCRIPTION
-+ "The MIB module to describe the RIP2 Version 2 Protocol"
-+ ::= { mib-2 23 }
-+
-+ -- RIP-2 Management Information Base
-+
-+ -- the RouteTag type represents the contents of the
-+ -- Route Domain field in the packet header or route entry.
-+ -- The use of the Route Domain is deprecated.
-+
-+ RouteTag ::= TEXTUAL-CONVENTION
-+ STATUS current
-+ DESCRIPTION
-+ "the RouteTag type represents the contents of the Route Domain
-+ field in the packet header or route entry"
-+ SYNTAX OCTET STRING (SIZE (2))
-+
-+--4.1 Global Counters
-+
-+-- The RIP-2 Globals Group.
-+-- Implementation of this group is mandatory for systems
-+-- which implement RIP-2.
-+
-+-- These counters are intended to facilitate debugging quickly
-+-- changing routes or failing neighbors
-+
-+rip2Globals OBJECT IDENTIFIER ::= { rip2 1 }
-+
-+ rip2GlobalRouteChanges OBJECT-TYPE
-+ SYNTAX Counter32
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "The number of route changes made to the IP Route
-+ Database by RIP. This does not include the refresh
-+ of a route's age."
-+ ::= { rip2Globals 1 }
-+
-+ rip2GlobalQueries OBJECT-TYPE
-+ SYNTAX Counter32
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "The number of responses sent to RIP queries
-+ from other systems."
-+ ::= { rip2Globals 2 }
-+
-+--4.2 RIP Interface Tables
-+
-+-- RIP Interfaces Groups
-+-- Implementation of these Groups is mandatory for systems
-+-- which implement RIP-2.
-+
-+-- The RIP Interface Status Table.
-+
-+ rip2IfStatTable OBJECT-TYPE
-+ SYNTAX SEQUENCE OF Rip2IfStatEntry
-+ MAX-ACCESS not-accessible
-+ STATUS current
-+ DESCRIPTION
-+ "A list of subnets which require separate
-+ status monitoring in RIP."
-+ ::= { rip2 2 }
-+
-+ rip2IfStatEntry OBJECT-TYPE
-+ SYNTAX Rip2IfStatEntry
-+ MAX-ACCESS not-accessible
-+ STATUS current
-+ DESCRIPTION
-+ "A Single Routing Domain in a single Subnet."
-+ INDEX { rip2IfStatAddress }
-+ ::= { rip2IfStatTable 1 }
-+
-+ Rip2IfStatEntry ::=
-+ SEQUENCE {
-+ rip2IfStatAddress
-+ IpAddress,
-+ rip2IfStatRcvBadPackets
-+ Counter32,
-+ rip2IfStatRcvBadRoutes
-+ Counter32,
-+ rip2IfStatSentUpdates
-+ Counter32,
-+ rip2IfStatStatus
-+ RowStatus
-+ }
-+
-+ rip2IfStatAddress OBJECT-TYPE
-+ SYNTAX IpAddress
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "The IP Address of this system on the indicated
-+ subnet. For unnumbered interfaces, the value 0.0.0.N,
-+ where the least significant 24 bits (N) is the ifIndex
-+ for the IP Interface in network byte order."
-+ ::= { rip2IfStatEntry 1 }
-+
-+ rip2IfStatRcvBadPackets OBJECT-TYPE
-+ SYNTAX Counter32
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "The number of RIP response packets received by
-+ the RIP process which were subsequently discarded
-+ for any reason (e.g. a version 0 packet, or an
-+ unknown command type)."
-+ ::= { rip2IfStatEntry 2 }
-+
-+ rip2IfStatRcvBadRoutes OBJECT-TYPE
-+ SYNTAX Counter32
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "The number of routes, in valid RIP packets,
-+ which were ignored for any reason (e.g. unknown
-+ address family, or invalid metric)."
-+ ::= { rip2IfStatEntry 3 }
-+
-+ rip2IfStatSentUpdates OBJECT-TYPE
-+ SYNTAX Counter32
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "The number of triggered RIP updates actually
-+ sent on this interface. This explicitly does
-+ NOT include full updates sent containing new
-+ information."
-+ ::= { rip2IfStatEntry 4 }
-+
-+ rip2IfStatStatus OBJECT-TYPE
-+ SYNTAX RowStatus
-+ MAX-ACCESS read-create
-+ STATUS current
-+ DESCRIPTION
-+ "Writing invalid has the effect of deleting
-+ this interface."
-+ ::= { rip2IfStatEntry 5 }
-+
-+-- The RIP Interface Configuration Table.
-+
-+ rip2IfConfTable OBJECT-TYPE
-+ SYNTAX SEQUENCE OF Rip2IfConfEntry
-+ MAX-ACCESS not-accessible
-+ STATUS current
-+ DESCRIPTION
-+ "A list of subnets which require separate
-+ configuration in RIP."
-+ ::= { rip2 3 }
-+
-+ rip2IfConfEntry OBJECT-TYPE
-+ SYNTAX Rip2IfConfEntry
-+ MAX-ACCESS not-accessible
-+ STATUS current
-+ DESCRIPTION
-+ "A Single Routing Domain in a single Subnet."
-+ INDEX { rip2IfConfAddress }
-+ ::= { rip2IfConfTable 1 }
-+
-+ Rip2IfConfEntry ::=
-+ SEQUENCE {
-+ rip2IfConfAddress
-+ IpAddress,
-+ rip2IfConfDomain
-+ RouteTag,
-+ rip2IfConfAuthType
-+ INTEGER,
-+ rip2IfConfAuthKey
-+ OCTET STRING (SIZE(0..16)),
-+ rip2IfConfSend
-+ INTEGER,
-+ rip2IfConfReceive
-+ INTEGER,
-+ rip2IfConfDefaultMetric
-+ INTEGER,
-+ rip2IfConfStatus
-+ RowStatus,
-+ rip2IfConfSrcAddress
-+ IpAddress
-+ }
-+
-+ rip2IfConfAddress OBJECT-TYPE
-+ SYNTAX IpAddress
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "The IP Address of this system on the indicated
-+ subnet. For unnumbered interfaces, the value 0.0.0.N,
-+ where the least significant 24 bits (N) is the ifIndex
-+ for the IP Interface in network byte order."
-+ ::= { rip2IfConfEntry 1 }
-+
-+ rip2IfConfDomain OBJECT-TYPE
-+ SYNTAX RouteTag
-+ MAX-ACCESS read-create
-+ STATUS obsolete
-+ DESCRIPTION
-+ "Value inserted into the Routing Domain field
-+ of all RIP packets sent on this interface."
-+ DEFVAL { '0000'h }
-+ ::= { rip2IfConfEntry 2 }
-+
-+ rip2IfConfAuthType OBJECT-TYPE
-+ SYNTAX INTEGER {
-+ noAuthentication (1),
-+ simplePassword (2),
-+ md5 (3)
-+ }
-+ MAX-ACCESS read-create
-+ STATUS current
-+ DESCRIPTION
-+ "The type of Authentication used on this
-+ interface."
-+ DEFVAL { noAuthentication }
-+ ::= { rip2IfConfEntry 3 }
-+
-+ rip2IfConfAuthKey OBJECT-TYPE
-+ SYNTAX OCTET STRING (SIZE(0..16))
-+ MAX-ACCESS read-create
-+ STATUS current
-+ DESCRIPTION
-+ "The value to be used as the Authentication Key
-+ whenever the corresponding instance of
-+ rip2IfConfAuthType has a value other than
-+ noAuthentication. A modification of the corresponding
-+ instance of rip2IfConfAuthType does not modify
-+ the rip2IfConfAuthKey value. If a string shorter
-+ than 16 octets is supplied, it will be left-
-+ justified and padded to 16 octets, on the right,
-+ with nulls (0x00).
-+
-+ Reading this object always results in an OCTET
-+ STRING of length zero; authentication may not
-+ be bypassed by reading the MIB object."
-+ DEFVAL { ''h }
-+ ::= { rip2IfConfEntry 4 }
-+
-+ rip2IfConfSend OBJECT-TYPE
-+ SYNTAX INTEGER {
-+ doNotSend (1),
-+ ripVersion1 (2),
-+ rip1Compatible (3),
-+ ripVersion2 (4),
-+ ripV1Demand (5),
-+ ripV2Demand (6)
-+ }
-+ MAX-ACCESS read-create
-+ STATUS current
-+ DESCRIPTION
-+ "What the router sends on this interface.
-+ ripVersion1 implies sending RIP updates compliant
-+ with RFC 1058. rip1Compatible implies
-+ broadcasting RIP-2 updates using RFC 1058 route
-+ subsumption rules. ripVersion2 implies
-+ multicasting RIP-2 updates. ripV1Demand indicates
-+ the use of Demand RIP on a WAN interface under RIP
-+ Version 1 rules. ripV2Demand indicates the use of
-+ Demand RIP on a WAN interface under Version 2 rules."
-+ DEFVAL { rip1Compatible }
-+ ::= { rip2IfConfEntry 5 }
-+
-+ rip2IfConfReceive OBJECT-TYPE
-+ SYNTAX INTEGER {
-+ rip1 (1),
-+ rip2 (2),
-+ rip1OrRip2 (3),
-+ doNotRecieve (4)
-+ }
-+ MAX-ACCESS read-create
-+ STATUS current
-+ DESCRIPTION
-+ "This indicates which version of RIP updates
-+ are to be accepted. Note that rip2 and
-+ rip1OrRip2 implies reception of multicast
-+ packets."
-+ DEFVAL { rip1OrRip2 }
-+ ::= { rip2IfConfEntry 6 }
-+
-+ rip2IfConfDefaultMetric OBJECT-TYPE
-+ SYNTAX INTEGER ( 0..15 )
-+ MAX-ACCESS read-create
-+ STATUS current
-+ DESCRIPTION
-+ "This variable indicates the metric that is to
-+ be used for the default route entry in RIP updates
-+ originated on this interface. A value of zero
-+ indicates that no default route should be
-+ originated; in this case, a default route via
-+ another router may be propagated."
-+ ::= { rip2IfConfEntry 7 }
-+
-+ rip2IfConfStatus OBJECT-TYPE
-+ SYNTAX RowStatus
-+ MAX-ACCESS read-create
-+ STATUS current
-+ DESCRIPTION
-+ "Writing invalid has the effect of deleting
-+ this interface."
-+ ::= { rip2IfConfEntry 8 }
-+
-+ rip2IfConfSrcAddress OBJECT-TYPE
-+ SYNTAX IpAddress
-+ MAX-ACCESS read-create
-+ STATUS current
-+ DESCRIPTION
-+ "The IP Address this system will use as a source
-+ address on this interface. If it is a numbered
-+ interface, this MUST be the same value as
-+ rip2IfConfAddress. On unnumbered interfaces,
-+ it must be the value of rip2IfConfAddress for
-+ some interface on the system."
-+ ::= { rip2IfConfEntry 9 }
-+
-+--4.3 Peer Table
-+
-+-- Peer Table
-+
-+-- The RIP Peer Group
-+-- Implementation of this Group is Optional
-+
-+-- This group provides information about active peer
-+-- relationships intended to assist in debugging. An
-+-- active peer is a router from which a valid RIP
-+-- updated has been heard in the last 180 seconds.
-+
-+ rip2PeerTable OBJECT-TYPE
-+ SYNTAX SEQUENCE OF Rip2PeerEntry
-+ MAX-ACCESS not-accessible
-+ STATUS current
-+ DESCRIPTION
-+ "A list of RIP Peers."
-+ ::= { rip2 4 }
-+
-+ rip2PeerEntry OBJECT-TYPE
-+ SYNTAX Rip2PeerEntry
-+ MAX-ACCESS not-accessible
-+ STATUS current
-+ DESCRIPTION
-+ "Information regarding a single routing peer."
-+ INDEX { rip2PeerAddress, rip2PeerDomain }
-+ ::= { rip2PeerTable 1 }
-+
-+ Rip2PeerEntry ::=
-+ SEQUENCE {
-+ rip2PeerAddress
-+ IpAddress,
-+ rip2PeerDomain
-+ RouteTag,
-+ rip2PeerLastUpdate
-+ TimeTicks,
-+ rip2PeerVersion
-+ INTEGER,
-+ rip2PeerRcvBadPackets
-+ Counter32,
-+ rip2PeerRcvBadRoutes
-+ Counter32
-+ }
-+
-+ rip2PeerAddress OBJECT-TYPE
-+ SYNTAX IpAddress
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "The IP Address that the peer is using as its source
-+ address. Note that on an unnumbered link, this may
-+ not be a member of any subnet on the system."
-+ ::= { rip2PeerEntry 1 }
-+
-+ rip2PeerDomain OBJECT-TYPE
-+ SYNTAX RouteTag
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "The value in the Routing Domain field in RIP
-+ packets received from the peer. As domain suuport
-+ is deprecated, this must be zero."
-+ ::= { rip2PeerEntry 2 }
-+
-+ rip2PeerLastUpdate OBJECT-TYPE
-+ SYNTAX TimeTicks
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "The value of sysUpTime when the most recent
-+ RIP update was received from this system."
-+ ::= { rip2PeerEntry 3 }
-+
-+ rip2PeerVersion OBJECT-TYPE
-+ SYNTAX INTEGER ( 0..255 )
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "The RIP version number in the header of the
-+ last RIP packet received."
-+ ::= { rip2PeerEntry 4 }
-+
-+ rip2PeerRcvBadPackets OBJECT-TYPE
-+ SYNTAX Counter32
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "The number of RIP response packets from this
-+ peer discarded as invalid."
-+ ::= { rip2PeerEntry 5 }
-+
-+
-+ rip2PeerRcvBadRoutes OBJECT-TYPE
-+ SYNTAX Counter32
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "The number of routes from this peer that were
-+ ignored because the entry format was invalid."
-+ ::= { rip2PeerEntry 6 }
-+
-+-- conformance information
-+
-+rip2Conformance OBJECT IDENTIFIER ::= { rip2 5 }
-+
-+rip2Groups OBJECT IDENTIFIER ::= { rip2Conformance 1 }
-+rip2Compliances OBJECT IDENTIFIER ::= { rip2Conformance 2 }
-+
-+-- compliance statements
-+rip2Compliance MODULE-COMPLIANCE
-+ STATUS current
-+ DESCRIPTION
-+ "The compliance statement "
-+ MODULE -- this module
-+ MANDATORY-GROUPS {
-+ rip2GlobalGroup,
-+ rip2IfStatGroup,
-+ rip2IfConfGroup,
-+ rip2PeerGroup
-+ }
-+ GROUP rip2GlobalGroup
-+ DESCRIPTION
-+ "This group defines global controls for RIP-II systems."
-+ GROUP rip2IfStatGroup
-+ DESCRIPTION
-+ "This group defines interface statistics for RIP-II systems."
-+ GROUP rip2IfConfGroup
-+ DESCRIPTION
-+ "This group defines interface configuration for RIP-II systems."
-+ GROUP rip2PeerGroup
-+ DESCRIPTION
-+ "This group defines peer information for RIP-II systems."
-+ ::= { rip2Compliances 1 }
-+
-+-- units of conformance
-+
-+rip2GlobalGroup OBJECT-GROUP
-+ OBJECTS {
-+ rip2GlobalRouteChanges,
-+ rip2GlobalQueries
-+ }
-+ STATUS current
-+ DESCRIPTION
-+ "This group defines global controls for RIP-II systems."
-+ ::= { rip2Groups 1 }
-+rip2IfStatGroup OBJECT-GROUP
-+ OBJECTS {
-+ rip2IfStatAddress,
-+ rip2IfStatRcvBadPackets,
-+ rip2IfStatRcvBadRoutes,
-+ rip2IfStatSentUpdates,
-+ rip2IfStatStatus
-+ }
-+ STATUS current
-+ DESCRIPTION
-+ "This group defines interface statistics for RIP-II systems."
-+ ::= { rip2Groups 2 }
-+rip2IfConfGroup OBJECT-GROUP
-+ OBJECTS {
-+ rip2IfConfAddress,
-+ rip2IfConfAuthType,
-+ rip2IfConfAuthKey,
-+ rip2IfConfSend,
-+ rip2IfConfReceive,
-+ rip2IfConfDefaultMetric,
-+ rip2IfConfStatus,
-+ rip2IfConfSrcAddress
-+ }
-+ STATUS current
-+ DESCRIPTION
-+ "This group defines interface configuration for RIP-II systems."
-+ ::= { rip2Groups 3 }
-+rip2PeerGroup OBJECT-GROUP
-+ OBJECTS {
-+ rip2PeerAddress,
-+ rip2PeerDomain,
-+ rip2PeerLastUpdate,
-+ rip2PeerVersion,
-+ rip2PeerRcvBadPackets,
-+ rip2PeerRcvBadRoutes
-+ }
-+ STATUS current
-+ DESCRIPTION
-+ "This group defines peer information for RIP-II systems."
-+ ::= { rip2Groups 4 }
-+END
-diff -ruN net-snmp-5.4.1.orig/mibs/SOURCE-ROUTING-MIB.txt net-snmp-5.4.1/mibs/SOURCE-ROUTING-MIB.txt
---- net-snmp-5.4.1.orig/mibs/SOURCE-ROUTING-MIB.txt 1970-01-01 01:00:00.000000000 +0100
-+++ net-snmp-5.4.1/mibs/SOURCE-ROUTING-MIB.txt 2007-09-20 16:30:52.000000000 +0200
-@@ -0,0 +1,452 @@
-+SOURCE-ROUTING-MIB DEFINITIONS ::= BEGIN
-+
-+IMPORTS
-+ Counter, Gauge
-+ FROM RFC1155-SMI
-+ dot1dBridge, dot1dSr
-+ FROM BRIDGE-MIB
-+ OBJECT-TYPE
-+ FROM RFC-1212;
-+
-+-- groups in the SR MIB
-+
-+-- dot1dSr is imported from the Bridge MIB
-+
-+dot1dPortPair OBJECT IDENTIFIER ::= { dot1dBridge 10 }
-+
-+-- the dot1dSr group
-+
-+-- this group is implemented by those bridges that
-+-- support the source route bridging mode, including Source
-+-- Routing and SRT bridges.
-+
-+dot1dSrPortTable OBJECT-TYPE
-+ SYNTAX SEQUENCE OF Dot1dSrPortEntry
-+ ACCESS not-accessible
-+ STATUS mandatory
-+ DESCRIPTION
-+ "A table that contains information about every
-+ port that is associated with this source route
-+ bridge."
-+ ::= { dot1dSr 1 }
-+
-+dot1dSrPortEntry OBJECT-TYPE
-+ SYNTAX Dot1dSrPortEntry
-+ ACCESS not-accessible
-+ STATUS mandatory
-+ DESCRIPTION
-+ "A list of information for each port of a source
-+ route bridge."
-+ INDEX { dot1dSrPort }
-+
-+ ::= { dot1dSrPortTable 1 }
-+
-+Dot1dSrPortEntry ::=
-+ SEQUENCE {
-+ dot1dSrPort
-+ INTEGER,
-+ dot1dSrPortHopCount
-+ INTEGER,
-+ dot1dSrPortLocalSegment
-+ INTEGER,
-+ dot1dSrPortBridgeNum
-+ INTEGER,
-+ dot1dSrPortTargetSegment
-+ INTEGER,
-+ dot1dSrPortLargestFrame
-+ INTEGER,
-+ dot1dSrPortSTESpanMode
-+ INTEGER,
-+ dot1dSrPortSpecInFrames
-+ Counter,
-+ dot1dSrPortSpecOutFrames
-+ Counter,
-+ dot1dSrPortApeInFrames
-+ Counter,
-+ dot1dSrPortApeOutFrames
-+ Counter,
-+ dot1dSrPortSteInFrames
-+ Counter,
-+ dot1dSrPortSteOutFrames
-+ Counter,
-+ dot1dSrPortSegmentMismatchDiscards
-+ Counter,
-+ dot1dSrPortDuplicateSegmentDiscards
-+ Counter,
-+ dot1dSrPortHopCountExceededDiscards
-+ Counter,
-+ dot1dSrPortDupLanIdOrTreeErrors
-+ Counter,
-+ dot1dSrPortLanIdMismatches
-+ Counter
-+ }
-+
-+dot1dSrPort OBJECT-TYPE
-+ SYNTAX INTEGER (1..65535)
-+ ACCESS read-only
-+ STATUS mandatory
-+ DESCRIPTION
-+ "The port number of the port for which this entry
-+
-+ contains Source Route management information."
-+ ::= { dot1dSrPortEntry 1 }
-+
-+dot1dSrPortHopCount OBJECT-TYPE
-+ SYNTAX INTEGER
-+ ACCESS read-write
-+ STATUS mandatory
-+ DESCRIPTION
-+ "The maximum number of routing descriptors allowed
-+ in an All Paths or Spanning Tree Explorer frames."
-+ ::= { dot1dSrPortEntry 2 }
-+
-+dot1dSrPortLocalSegment OBJECT-TYPE
-+ SYNTAX INTEGER
-+ ACCESS read-write
-+ STATUS mandatory
-+ DESCRIPTION
-+ "The segment number that uniquely identifies the
-+ segment to which this port is connected. Current
-+ source routing protocols limit this value to the
-+ range: 0 through 4095. (The value 0 is used by
-+ some management applications for special test
-+ cases.) A value of 65535 signifies that no segment
-+ number is assigned to this port."
-+ ::= { dot1dSrPortEntry 3 }
-+
-+dot1dSrPortBridgeNum OBJECT-TYPE
-+ SYNTAX INTEGER
-+ ACCESS read-write
-+ STATUS mandatory
-+ DESCRIPTION
-+ "A bridge number uniquely identifies a bridge when
-+ more than one bridge is used to span the same two
-+ segments. Current source routing protocols limit
-+ this value to the range: 0 through 15. A value of
-+ 65535 signifies that no bridge number is assigned
-+ to this bridge."
-+ ::= { dot1dSrPortEntry 4 }
-+
-+dot1dSrPortTargetSegment OBJECT-TYPE
-+ SYNTAX INTEGER
-+ ACCESS read-write
-+ STATUS mandatory
-+ DESCRIPTION
-+ "The segment number that corresponds to the target
-+ segment this port is considered to be connected to
-+ by the bridge. Current source routing protocols
-+ limit this value to the range: 0 through 4095.
-+
-+ (The value 0 is used by some management
-+ applications for special test cases.) A value of
-+ 65535 signifies that no target segment is assigned
-+ to this port."
-+ ::= { dot1dSrPortEntry 5 }
-+
-+-- It would be nice if we could use ifMtu as the size of the
-+-- largest frame, but we can't because ifMtu is defined to be
-+-- the size that the (inter-)network layer can use which can
-+-- differ from the MAC layer (especially if several layers of
-+-- encapsulation are used).
-+
-+dot1dSrPortLargestFrame OBJECT-TYPE
-+ SYNTAX INTEGER
-+ ACCESS read-write
-+ STATUS mandatory
-+ DESCRIPTION
-+ "The maximum size of the INFO field (LLC and
-+ above) that this port can send/receive. It does
-+ not include any MAC level (framing) octets. The
-+ value of this object is used by this bridge to
-+ determine whether a modification of the
-+ LargestFrame (LF, see [14]) field of the Routing
-+ Control field of the Routing Information Field is
-+ necessary.
-+
-+ 64 valid values are defined by the IEEE 802.5M SRT
-+ Addendum: 516, 635, 754, 873, 993, 1112, 1231,
-+ 1350, 1470, 1542, 1615, 1688, 1761, 1833, 1906,
-+ 1979, 2052, 2345, 2638, 2932, 3225, 3518, 3812,
-+ 4105, 4399, 4865, 5331, 5798, 6264, 6730, 7197,
-+ 7663, 8130, 8539, 8949, 9358, 9768, 10178, 10587,
-+ 10997, 11407, 12199, 12992, 13785, 14578, 15370,
-+ 16163, 16956, 17749, 20730, 23711, 26693, 29674,
-+ 32655, 35637, 38618, 41600, 44591, 47583, 50575,
-+ 53567, 56559, 59551, and 65535.
-+
-+ An illegal value will not be accepted by the
-+ bridge."
-+ ::= { dot1dSrPortEntry 6 }
-+
-+dot1dSrPortSTESpanMode OBJECT-TYPE
-+ SYNTAX INTEGER {
-+ auto-span(1),
-+ disabled(2),
-+ forced(3)
-+ }
-+ ACCESS read-write
-+ STATUS mandatory
-+ DESCRIPTION
-+ "Determines how this port behaves when presented
-+ with a Spanning Tree Explorer frame. The value
-+ 'disabled(2)' indicates that the port will not
-+ accept or send Spanning Tree Explorer packets; any
-+ STE packets received will be silently discarded.
-+ The value 'forced(3)' indicates the port will
-+ always accept and propagate Spanning Tree Explorer
-+ frames. This allows a manually configured
-+ Spanning Tree for this class of packet to be
-+ configured. Note that unlike transparent
-+ bridging, this is not catastrophic to the network
-+ if there are loops. The value 'auto-span(1)' can
-+ only be returned by a bridge that both implements
-+ the Spanning Tree Protocol and has use of the
-+ protocol enabled on this port. The behavior of the
-+ port for Spanning Tree Explorer frames is
-+ determined by the state of dot1dStpPortState. If
-+ the port is in the 'forwarding' state, the frame
-+ will be accepted or propagated. Otherwise, it
-+ will be silently discarded."
-+ ::= { dot1dSrPortEntry 7 }
-+
-+dot1dSrPortSpecInFrames OBJECT-TYPE
-+ SYNTAX Counter
-+ ACCESS read-only
-+ STATUS mandatory
-+ DESCRIPTION
-+ "The number of Specifically Routed frames, also
-+ referred to as Source Routed Frames, that have
-+ been received from this port's segment."
-+ ::= { dot1dSrPortEntry 8 }
-+
-+dot1dSrPortSpecOutFrames OBJECT-TYPE
-+ SYNTAX Counter
-+ ACCESS read-only
-+ STATUS mandatory
-+ DESCRIPTION
-+ "The number of Specifically Routed frames, also
-+ referred to as Source Routed Frames, that this
-+ port has transmitted on its segment."
-+ ::= { dot1dSrPortEntry 9 }
-+
-+dot1dSrPortApeInFrames OBJECT-TYPE
-+ SYNTAX Counter
-+ ACCESS read-only
-+ STATUS mandatory
-+ DESCRIPTION
-+ "The number of All Paths Explorer frames, also
-+ referred to as All Routes Explorer frames, that
-+ have been received by this port from its segment."
-+ ::= { dot1dSrPortEntry 10 }
-+
-+dot1dSrPortApeOutFrames OBJECT-TYPE
-+ SYNTAX Counter
-+ ACCESS read-only
-+ STATUS mandatory
-+ DESCRIPTION
-+ "The number of all Paths Explorer Frames, also
-+ referred to as All Routes Explorer frames, that
-+ have been transmitted by this port on its
-+ segment."
-+ ::= { dot1dSrPortEntry 11 }
-+
-+dot1dSrPortSteInFrames OBJECT-TYPE
-+ SYNTAX Counter
-+ ACCESS read-only
-+ STATUS mandatory
-+ DESCRIPTION
-+ "The number of spanning tree explorer frames that
-+ have been received by this port from its segment."
-+ ::= { dot1dSrPortEntry 12 }
-+
-+dot1dSrPortSteOutFrames OBJECT-TYPE
-+ SYNTAX Counter
-+ ACCESS read-only
-+ STATUS mandatory
-+ DESCRIPTION
-+ "The number of spanning tree explorer frames that
-+ have been transmitted by this port on its
-+ segment."
-+ ::= { dot1dSrPortEntry 13 }
-+
-+dot1dSrPortSegmentMismatchDiscards OBJECT-TYPE
-+ SYNTAX Counter
-+ ACCESS read-only
-+ STATUS mandatory
-+ DESCRIPTION
-+ "The number of explorer frames that have been
-+ discarded by this port because the routing
-+ descriptor field contained an invalid adjacent
-+ segment value."
-+ ::= { dot1dSrPortEntry 14 }
-+
-+dot1dSrPortDuplicateSegmentDiscards OBJECT-TYPE
-+ SYNTAX Counter
-+ ACCESS read-only
-+ STATUS mandatory
-+ DESCRIPTION
-+ "The number of frames that have been discarded by
-+ this port because the routing descriptor field
-+ contained a duplicate segment identifier."
-+ ::= { dot1dSrPortEntry 15 }
-+
-+dot1dSrPortHopCountExceededDiscards OBJECT-TYPE
-+ SYNTAX Counter
-+ ACCESS read-only
-+ STATUS mandatory
-+ DESCRIPTION
-+ "The number of explorer frames that have been
-+ discarded by this port because the Routing
-+ Information Field has exceeded the maximum route
-+ descriptor length."
-+ ::= { dot1dSrPortEntry 16 }
-+
-+dot1dSrPortDupLanIdOrTreeErrors OBJECT-TYPE
-+ SYNTAX Counter
-+ ACCESS read-only
-+ STATUS mandatory
-+ DESCRIPTION
-+ "The number of duplicate LAN IDs or Tree errors.
-+ This helps in detection of problems in networks
-+ containing older IBM Source Routing Bridges."
-+ ::= { dot1dSrPortEntry 17 }
-+
-+dot1dSrPortLanIdMismatches OBJECT-TYPE
-+ SYNTAX Counter
-+ ACCESS read-only
-+ STATUS mandatory
-+ DESCRIPTION
-+ "The number of ARE and STE frames that were
-+ discarded because the last LAN ID in the routing
-+ information field did not equal the LAN-in ID.
-+ This error can occur in implementations which do
-+ only a LAN-in ID and Bridge Number check instead
-+ of a LAN-in ID, Bridge Number, and LAN-out ID
-+ check before they forward broadcast frames."
-+ ::= { dot1dSrPortEntry 18 }
-+
-+-- scalar object in dot1dSr
-+
-+dot1dSrBridgeLfMode OBJECT-TYPE
-+ SYNTAX INTEGER {
-+ mode3(1),
-+ mode6(2)
-+ }
-+ ACCESS read-write
-+ STATUS mandatory
-+ DESCRIPTION
-+ "Indicates whether the bridge operates using older
-+ 3 bit length negotiation fields or the newer 6 bit
-+ length field in its RIF."
-+ ::= { dot1dSr 2 }
-+
-+-- The Port-Pair Database
-+
-+-- Implementation of this group is optional.
-+
-+-- This group is implemented by those bridges that support
-+-- the direct multiport model of the source route bridging
-+-- mode as defined in the IEEE 802.5 SRT Addendum to
-+-- 802.1d.
-+
-+-- Bridges implementing this group may report 65535 for
-+-- dot1dSrPortBridgeNumber and dot1dSrPortTargetSegment,
-+-- indicating that those objects are not applicable.
-+
-+dot1dPortPairTableSize OBJECT-TYPE
-+ SYNTAX Gauge
-+ ACCESS read-only
-+ STATUS mandatory
-+ DESCRIPTION
-+ "The total number of entries in the Bridge Port
-+ Pair Database."
-+ ::= { dot1dPortPair 1 }
-+
-+-- the Bridge Port-Pair table
-+
-+-- this table represents port pairs within a bridge forming
-+-- a unique bridge path, as defined in the IEEE 802.5M SRT
-+-- Addendum.
-+
-+dot1dPortPairTable OBJECT-TYPE
-+ SYNTAX SEQUENCE OF Dot1dPortPairEntry
-+ ACCESS not-accessible
-+ STATUS mandatory
-+ DESCRIPTION
-+ "A table that contains information about every
-+
-+ port pair database entity associated with this
-+ source routing bridge."
-+ ::= { dot1dPortPair 2 }
-+
-+dot1dPortPairEntry OBJECT-TYPE
-+ SYNTAX Dot1dPortPairEntry
-+ ACCESS not-accessible
-+ STATUS mandatory
-+ DESCRIPTION
-+ "A list of information for each port pair entity
-+ of a bridge."
-+ INDEX { dot1dPortPairLowPort, dot1dPortPairHighPort }
-+ ::= { dot1dPortPairTable 1 }
-+
-+Dot1dPortPairEntry ::=
-+ SEQUENCE {
-+ dot1dPortPairLowPort
-+ INTEGER,
-+ dot1dPortPairHighPort
-+ INTEGER,
-+ dot1dPortPairBridgeNum
-+ INTEGER,
-+ dot1dPortPairBridgeState
-+ INTEGER
-+ }
-+
-+dot1dPortPairLowPort OBJECT-TYPE
-+ SYNTAX INTEGER (1..65535)
-+ ACCESS read-write
-+ STATUS mandatory
-+ DESCRIPTION
-+ "The port number of the lower numbered port for
-+ which this entry contains port pair database
-+ information."
-+ ::= { dot1dPortPairEntry 1 }
-+
-+dot1dPortPairHighPort OBJECT-TYPE
-+ SYNTAX INTEGER (1..65535)
-+ ACCESS read-write
-+ STATUS mandatory
-+ DESCRIPTION
-+ "The port number of the higher numbered port for
-+ which this entry contains port pair database
-+ information."
-+ ::= { dot1dPortPairEntry 2 }
-+
-+dot1dPortPairBridgeNum OBJECT-TYPE
-+ SYNTAX INTEGER
-+
-+ ACCESS read-write
-+ STATUS mandatory
-+ DESCRIPTION
-+ "A bridge number that uniquely identifies the path
-+ provided by this source routing bridge between the
-+ segments connected to dot1dPortPairLowPort and
-+ dot1dPortPairHighPort. The purpose of bridge
-+ number is to disambiguate between multiple paths
-+ connecting the same two LANs."
-+ ::= { dot1dPortPairEntry 3 }
-+
-+dot1dPortPairBridgeState OBJECT-TYPE
-+ SYNTAX INTEGER {
-+ enabled(1),
-+ disabled(2),
-+ invalid(3)
-+ }
-+ ACCESS read-write
-+ STATUS mandatory
-+ DESCRIPTION
-+ "The state of dot1dPortPairBridgeNum. Writing
-+ 'invalid(3)' to this object removes the
-+ corresponding entry."
-+ ::= { dot1dPortPairEntry 4 }
-+
-+END
Added: branches/net-snmp54/debian/patches/58_download_mibs.README
===================================================================
--- branches/net-snmp54/debian/patches/58_download_mibs.README (rev 0)
+++ branches/net-snmp54/debian/patches/58_download_mibs.README 2009-11-06 18:11:10 UTC (rev 295)
@@ -0,0 +1 @@
+Patch to enable MIB file download during or after installation
Added: branches/net-snmp54/debian/patches/58_download_mibs.patch
===================================================================
--- branches/net-snmp54/debian/patches/58_download_mibs.patch (rev 0)
+++ branches/net-snmp54/debian/patches/58_download_mibs.patch 2009-11-06 18:11:10 UTC (rev 295)
@@ -0,0 +1,628 @@
+Index: net-snmp-5.4.2.1/mibs/Makefile.mib
+===================================================================
+--- net-snmp-5.4.2.1.orig/mibs/Makefile.mib 2009-11-06 18:25:24.000000000 +0100
++++ net-snmp-5.4.2.1/mibs/Makefile.mib 2009-11-06 18:27:03.000000000 +0100
+@@ -1,182 +1,45 @@
+-# RFCHOST = ftp://ftp.nordu.net
+ RFCHOST = ftp://ftp.ietf.org
+ RFCDIR = rfc
+
+ IANAHOST = http://www.iana.org
+ IANADIR = assignments
+
+-PREFIX = /usr/local
+-ALLDIR = $(PREFIX)/share/snmp/rfc.orig
+-INSTDIR = $(PREFIX)/share/snmp/rfc
+-
+-MIBS = SNMPv2-TC.txt SNMPv2-TM.txt SNMPv2-SMI.txt SNMPv2-MIB.txt \
+- SNMPv2-CONF.txt HCNUM-TC.txt INET-ADDRESS-MIB.txt \
+- SNMP-FRAMEWORK-MIB.txt SNMP-MPD-MIB.txt SNMP-USER-BASED-SM-MIB.txt \
+- SNMP-VIEW-BASED-ACM-MIB.txt SNMP-COMMUNITY-MIB.txt \
+- SNMP-TARGET-MIB.txt SNMP-NOTIFICATION-MIB.txt SNMP-PROXY-MIB.txt \
+- AGENTX-MIB.txt SMUX-MIB.txt \
+- DISMAN-SCRIPT-MIB.txt DISMAN-SCHEDULE-MIB.txt \
+- IANA-LANGUAGE-MIB.txt IANA-ADDRESS-FAMILY-NUMBERS-MIB.txt \
+- IF-MIB.txt IF-INVERTED-STACK-MIB.txt \
+- IP-MIB.txt IP-FORWARD-MIB.txt TCP-MIB.txt UDP-MIB.txt \
+- IANAifType-MIB.txt EtherLike-MIB.txt \
+- IPV6-TC.txt IPV6-MIB.txt IPV6-ICMP-MIB.txt \
+- IPV6-TCP-MIB.txt IPV6-UDP-MIB.txt \
+- HOST-RESOURCES-MIB.txt HOST-RESOURCES-TYPES.txt \
+- NETWORK-SERVICES-MIB.txt MTA-MIB.txt \
+- RMON-MIB.txt \
+- RFC1155-SMI.txt RFC1213-MIB.txt \
+- SCTP-MIB.txt
++PREFIX = /usr
++INSTDIR = $(PREFIX)/share/mibs
++RFCTMP = $(INSTDIR)/ietf.orig
++IANATMP = $(INSTDIR)/iana.orig
+
+-MIBDEPS = Makefile.mib mibfetch smistrip
+-
+-all: $(MIBS)
++all: rfc
+
+ allmibs: ianamibs rfcmibs
+
+ rfc: allmibs
+- rm -fr $(INSTDIR)
+- mkdir $(INSTDIR)
+- cp $(ALLDIR)/* $(INSTDIR)
+- if test `uname` = SunOS ; \
+- then gpatch -d $(INSTDIR) < rfcmibs.diff; \
+- else patch -d $(INSTDIR) < rfcmibs.diff; \
+- fi
+- rm -f $(INSTDIR)/*orig
+-
+-clean:
+- rm $(MIBS)
+-
+-SNMP-FRAMEWORK-MIB.txt: $(MIBDEPS)
+- ./mibfetch $(RFCHOST) $(RFCDIR) 3411
+-
+-SNMP-MPD-MIB.txt: $(MIBDEPS)
+- ./mibfetch $(RFCHOST) $(RFCDIR) 3412 SNMP-MPD-MIB
+-
+-SNMP-TARGET-MIB.txt SNMP-NOTIFICATION-MIB.txt SNMP-PROXY-MIB.txt: $(MIBDEPS)
+- ./mibfetch $(RFCHOST) $(RFCDIR) 3413
+-
+-SNMP-USER-BASED-SM-MIB.txt: $(MIBDEPS)
+- ./mibfetch $(RFCHOST) $(RFCDIR) 3414 SNMP-USER-BASED-SM-MIB
+-
+-SNMP-VIEW-BASED-ACM-MIB.txt: $(MIBDEPS)
+- ./mibfetch $(RFCHOST) $(RFCDIR) 3415
+-
+-SNMP-COMMUNITY-MIB.txt: $(MIBDEPS)
+- ./mibfetch $(RFCHOST) $(RFCDIR) 2576
+-
+-SNMPv2-SMI.txt: $(MIBDEPS)
+- ./mibfetch $(RFCHOST) $(RFCDIR) 2578 SNMPv2-SMI
+-
+-SNMPv2-TC.txt: $(MIBDEPS)
+- ./mibfetch $(RFCHOST) $(RFCDIR) 2579
+-
+-SNMPv2-CONF.txt: $(MIBDEPS)
+- ./mibfetch $(RFCHOST) $(RFCDIR) 2580
+-
+-SNMPv2-TM.txt: $(MIBDEPS)
+- ./mibfetch $(RFCHOST) $(RFCDIR) 3417
+-
+-SNMPv2-MIB.txt: $(MIBDEPS)
+- ./mibfetch $(RFCHOST) $(RFCDIR) 3418
+-
+-AGENTX-MIB.txt: $(MIBDEPS)
+- ./mibfetch $(RFCHOST) $(RFCDIR) 2742
+-
+-SMUX-MIB.txt: $(MIBDEPS)
+- ./mibfetch $(RFCHOST) $(RFCDIR) 1227 SMUX-MIB
+-
+-DISMAN-SCHEDULE-MIB.txt: $(MIBDEPS)
+- ./mibfetch $(RFCHOST) $(RFCDIR) 3231
+-
+-DISMAN-SCRIPT-MIB.txt: $(MIBDEPS)
+- ./mibfetch $(RFCHOST) $(RFCDIR) 3165
+-
+-IF-MIB.txt: $(MIBDEPS)
+- ./mibfetch $(RFCHOST) $(RFCDIR) 2863
+-
+-IF-INVERTED-STACK-MIB.txt: $(MIBDEPS)
+- ./mibfetch $(RFCHOST) $(RFCDIR) 2864
+-
+-HCNUM-TC.txt: $(MIBDEPS)
+- ./mibfetch $(RFCHOST) $(RFCDIR) 2856
+-
+-INET-ADDRESS-MIB.txt: $(MIBDEPS)
+- ./mibfetch $(RFCHOST) $(RFCDIR) 4001
+-
+-EtherLike-MIB.txt: $(MIBDEPS)
+- ./mibfetch $(RFCHOST) $(RFCDIR) 3635
+-
+-IANAifType-MIB.txt: $(MIBDEPS)
+- ./mibfetch -x $(IANAHOST) $(IANADIR) ianaiftype-mib
+-
+-IANA-LANGUAGE-MIB.txt: $(MIBDEPS)
+- ./mibfetch -x $(IANAHOST) $(IANADIR) ianalanguage-mib
+-
+-IANA-ADDRESS-FAMILY-NUMBERS-MIB.txt: $(MIBDEPS)
+- ./mibfetch -x $(IANAHOST) $(IANADIR) ianaaddressfamilynumbers-mib
+-
+-IP-MIB.txt: $(MIBDEPS)
+- ./mibfetch $(RFCHOST) $(RFCDIR) 2011
+-
+-IP-FORWARD-MIB.txt: $(MIBDEPS)
+- ./mibfetch $(RFCHOST) $(RFCDIR) 2096
+-
+-TCP-MIB.txt: $(MIBDEPS)
+- ./mibfetch $(RFCHOST) $(RFCDIR) 4022
+-
+-UDP-MIB.txt: $(MIBDEPS)
+- ./mibfetch $(RFCHOST) $(RFCDIR) 2013
+-
+-IPV6-TC.txt IPV6-MIB.txt: $(MIBDEPS)
+- ./mibfetch $(RFCHOST) $(RFCDIR) 2465
+-
+-IPV6-ICMP-MIB.txt: $(MIBDEPS)
+- ./mibfetch $(RFCHOST) $(RFCDIR) 2466
+-
+-IPV6-TCP-MIB.txt: $(MIBDEPS)
+- ./mibfetch $(RFCHOST) $(RFCDIR) 2452
+-
+-IPV6-UDP-MIB.txt: $(MIBDEPS)
+- ./mibfetch $(RFCHOST) $(RFCDIR) 2454
+-
+-HOST-RESOURCES-MIB.txt HOST-RESOURCES-TYPES.txt: $(MIBDEPS)
+- ./mibfetch $(RFCHOST) $(RFCDIR) 2790
+-
+-RMON-MIB.txt: $(MIBDEPS)
+- ./mibfetch $(RFCHOST) $(RFCDIR) 2819
+-
+-NETWORK-SERVICES-MIB.txt: $(MIBDEPS)
+- ./mibfetch $(RFCHOST) $(RFCDIR) 2788
+-
+-MTA-MIB.txt: $(MIBDEPS)
+- ./mibfetch $(RFCHOST) $(RFCDIR) 2789
+-
+-RFC1155-SMI.txt: $(MIBDEPS)
+- ./mibfetch $(RFCHOST) $(RFCDIR) 1155
+-
+-RFC1213-MIB.txt: $(MIBDEPS)
+- ./mibfetch $(RFCHOST) $(RFCDIR) 1213
+-
+-SCTP.txt: $(MIBDEPS)
+- ./mibfetch $(RFCHOST) $(RFCDIR) 3873
++ patch -d $(RFCTMP) < rfcmibs.diff; \
++ rm -f $(RFCTMP)/*orig
++ rm -fr $(INSTDIR)/iana
++ rm -fr $(INSTDIR)/ietf
++ mkdir $(INSTDIR)/iana
++ mkdir $(INSTDIR)/ietf
++ cp $(IANATMP)/* $(INSTDIR)/iana
++ cp $(RFCTMP)/* $(INSTDIR)/ietf
++ rm -fr *orig
+
+ ianamibs: ianalist
+- [ -d $(ALLDIR) ] || mkdir $(ALLDIR)
++ [ -d $(IANATMP) ] || mkdir $(IANATMP)
+ cat ianalist | while read file mibs; \
+ do \
+ if [ "$$file" != "#" ]; \
+ then \
+- ./mibfetch -d $(ALLDIR) -x $(IANAHOST) $(IANADIR) $$file $$mibs; \
++ ./mibfetch -d $(IANATMP) -x $(IANAHOST) $(IANADIR) $$file $$mibs; \
+ fi; \
+ done
+
+ rfcmibs: rfclist
+- [ -d $(ALLDIR) ] || mkdir $(ALLDIR)
++ [ -d $(RFCTMP) ] || mkdir $(RFCTMP)
+ cat rfclist | while read rfc mibs; \
+ do \
+ if [ "$$rfc" != "#" ]; \
+ then \
+- ./mibfetch -d $(ALLDIR) $(RFCHOST) $(RFCDIR) $$rfc $$mibs; \
++ ./mibfetch -d $(RFCTMP) $(RFCHOST) $(RFCDIR) $$rfc $$mibs; \
+ fi; \
+ done
+Index: net-snmp-5.4.2.1/mibs/mibfetch
+===================================================================
+--- net-snmp-5.4.2.1.orig/mibs/mibfetch 2009-11-06 18:25:23.000000000 +0100
++++ net-snmp-5.4.2.1/mibs/mibfetch 2009-11-06 18:26:07.000000000 +0100
+@@ -48,4 +48,4 @@
+ # ncftpget -FV ftp://$host/$dir/$file
+ wget -O - -q -nv $host/$dir/$file | \
+ tr -d \\r | \
+- ./smistrip $verbose -x .txt $mdir $mibs -
++ ./smistrip $verbose $mdir $mibs -
+Index: net-snmp-5.4.2.1/mibs/rfcmibs.diff
+===================================================================
+--- net-snmp-5.4.2.1.orig/mibs/rfcmibs.diff 2009-11-06 18:25:23.000000000 +0100
++++ net-snmp-5.4.2.1/mibs/rfcmibs.diff 2009-11-06 18:26:07.000000000 +0100
+@@ -1,7 +1,6 @@
+-Only in /usr/local/share/snmp/rfc: .index
+-diff -ru /usr/local/share/snmp/rfc.orig/ADSL-LINE-MIB.txt /usr/local/share/snmp/rfc/ADSL-LINE-MIB.txt
+---- /usr/local/share/snmp/rfc.orig/ADSL-LINE-MIB.txt Sat Mar 3 17:27:00 2001
+-+++ /usr/local/share/snmp/rfc/ADSL-LINE-MIB.txt Tue Jan 23 00:42:41 2001
++diff -ru /usr/local/share/snmp/rfc.orig/ADSL-LINE-MIB /usr/local/share/snmp/rfc/ADSL-LINE-MIB
++--- /usr/local/share/snmp/rfc.orig/ADSL-LINE-MIB Sat Mar 3 17:27:00 2001
+++++ /usr/local/share/snmp/rfc/ADSL-LINE-MIB Tue Jan 23 00:42:41 2001
+ @@ -3379,7 +3379,6 @@
+ static profiles are implemented."
+
+@@ -10,9 +9,9 @@
+ MIN-ACCESS read-write
+ DESCRIPTION
+ "Read-write access is applicable when
+-diff -ru /usr/local/share/snmp/rfc.orig/DLSW-MIB.txt /usr/local/share/snmp/rfc/DLSW-MIB.txt
+---- /usr/local/share/snmp/rfc.orig/DLSW-MIB.txt Sat Mar 3 17:18:28 2001
+-+++ /usr/local/share/snmp/rfc/DLSW-MIB.txt Tue Jan 23 00:13:40 2001
++diff -ru /usr/local/share/snmp/rfc.orig/DLSW-MIB /usr/local/share/snmp/rfc/DLSW-MIB
++--- /usr/local/share/snmp/rfc.orig/DLSW-MIB Sat Mar 3 17:18:28 2001
+++++ /usr/local/share/snmp/rfc/DLSW-MIB Tue Jan 23 00:13:40 2001
+ @@ -7,7 +7,7 @@
+
+ Counter32, Gauge32, TimeTicks,
+@@ -286,9 +285,9 @@
+
+ -- ...................................................................
+ -- Node Conformance Group
+-diff -ru /usr/local/share/snmp/rfc.orig/DSA-MIB.txt /usr/local/share/snmp/rfc/DSA-MIB.txt
+---- /usr/local/share/snmp/rfc.orig/DSA-MIB.txt Sat Mar 3 17:15:36 2001
+-+++ /usr/local/share/snmp/rfc/DSA-MIB.txt Thu Feb 22 00:33:45 2001
++diff -ru /usr/local/share/snmp/rfc.orig/DSA-MIB /usr/local/share/snmp/rfc/DSA-MIB
++--- /usr/local/share/snmp/rfc.orig/DSA-MIB Sat Mar 3 17:15:36 2001
+++++ /usr/local/share/snmp/rfc/DSA-MIB Thu Feb 22 00:33:45 2001
+ @@ -10,7 +10,7 @@
+ mib-2
+ FROM RFC1213-MIB
+@@ -298,9 +297,9 @@
+
+ dsaMIB MODULE-IDENTITY
+ LAST-UPDATED "9311250000Z"
+-diff -ru /usr/local/share/snmp/rfc.orig/FDDI-SMT73-MIB.txt /usr/local/share/snmp/rfc/FDDI-SMT73-MIB.txt
+---- /usr/local/share/snmp/rfc.orig/FDDI-SMT73-MIB.txt Sat Mar 3 17:15:09 2001
+-+++ /usr/local/share/snmp/rfc/FDDI-SMT73-MIB.txt Tue Jan 23 00:11:46 2001
++diff -ru /usr/local/share/snmp/rfc.orig/FDDI-SMT73-MIB /usr/local/share/snmp/rfc/FDDI-SMT73-MIB
++--- /usr/local/share/snmp/rfc.orig/FDDI-SMT73-MIB Sat Mar 3 17:15:09 2001
+++++ /usr/local/share/snmp/rfc/FDDI-SMT73-MIB Tue Jan 23 00:11:46 2001
+ @@ -3,6 +3,8 @@
+ IMPORTS
+ Counter
+@@ -310,9 +309,9 @@
+ OBJECT-TYPE
+ FROM RFC-1212;
+
+-diff -ru /usr/local/share/snmp/rfc.orig/HPR-MIB.txt /usr/local/share/snmp/rfc/HPR-MIB.txt
+---- /usr/local/share/snmp/rfc.orig/HPR-MIB.txt Sat Mar 3 17:19:54 2001
+-+++ /usr/local/share/snmp/rfc/HPR-MIB.txt Tue Jan 23 00:25:54 2001
++diff -ru /usr/local/share/snmp/rfc.orig/HPR-MIB /usr/local/share/snmp/rfc/HPR-MIB
++--- /usr/local/share/snmp/rfc.orig/HPR-MIB Sat Mar 3 17:19:54 2001
+++++ /usr/local/share/snmp/rfc/HPR-MIB Tue Jan 23 00:25:54 2001
+ @@ -18,7 +18,7 @@
+ FROM APPN-MIB;
+
+@@ -322,9 +321,9 @@
+ ORGANIZATION "AIW APPN / HPR MIB SIG"
+ CONTACT-INFO
+ "
+-diff -ru /usr/local/share/snmp/rfc.orig/MIP-MIB.txt /usr/local/share/snmp/rfc/MIP-MIB.txt
+---- /usr/local/share/snmp/rfc.orig/MIP-MIB.txt Sat Mar 3 17:17:42 2001
+-+++ /usr/local/share/snmp/rfc/MIP-MIB.txt Tue Jan 23 00:25:27 2001
++diff -ru /usr/local/share/snmp/rfc.orig/MIP-MIB /usr/local/share/snmp/rfc/MIP-MIB
++--- /usr/local/share/snmp/rfc.orig/MIP-MIB Sat Mar 3 17:17:42 2001
+++++ /usr/local/share/snmp/rfc/MIP-MIB Tue Jan 23 00:25:27 2001
+ @@ -1,7 +1,7 @@
+ MIP-MIB DEFINITIONS ::= BEGIN
+
+@@ -343,9 +342,9 @@
+ NOTIFICATIONS { mipAuthFailure }
+ STATUS current
+ DESCRIPTION
+-diff -ru /usr/local/share/snmp/rfc.orig/Modem-MIB.txt /usr/local/share/snmp/rfc/Modem-MIB.txt
+---- /usr/local/share/snmp/rfc.orig/Modem-MIB.txt Sat Mar 3 17:16:35 2001
+-+++ /usr/local/share/snmp/rfc/Modem-MIB.txt Mon Jan 22 23:53:08 2001
++diff -ru /usr/local/share/snmp/rfc.orig/Modem-MIB /usr/local/share/snmp/rfc/Modem-MIB
++--- /usr/local/share/snmp/rfc.orig/Modem-MIB Sat Mar 3 17:16:35 2001
+++++ /usr/local/share/snmp/rfc/Modem-MIB Mon Jan 22 23:53:08 2001
+ @@ -23,7 +23,7 @@
+ E-mail: waldbusser at cmu.edu"
+ DESCRIPTION
+@@ -355,9 +354,9 @@
+
+ mdmMib OBJECT IDENTIFIER ::= { mib-2 38 }
+
+-diff -ru /usr/local/share/snmp/rfc.orig/PPP-LCP-MIB.txt /usr/local/share/snmp/rfc/PPP-LCP-MIB.txt
+---- /usr/local/share/snmp/rfc.orig/PPP-LCP-MIB.txt Sat Mar 3 17:14:46 2001
+-+++ /usr/local/share/snmp/rfc/PPP-LCP-MIB.txt Sat Mar 3 23:13:27 2001
++diff -ru /usr/local/share/snmp/rfc.orig/PPP-LCP-MIB /usr/local/share/snmp/rfc/PPP-LCP-MIB
++--- /usr/local/share/snmp/rfc.orig/PPP-LCP-MIB Sat Mar 3 17:14:46 2001
+++++ /usr/local/share/snmp/rfc/PPP-LCP-MIB Sat Mar 3 23:13:27 2001
+ @@ -182,7 +182,7 @@
+ ::= { pppLinkStatusEntry 5 }
+
+@@ -394,9 +393,9 @@
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+-diff -ru /usr/local/share/snmp/rfc.orig/RDBMS-MIB.txt /usr/local/share/snmp/rfc/RDBMS-MIB.txt
+---- /usr/local/share/snmp/rfc.orig/RDBMS-MIB.txt Sat Mar 3 17:16:41 2001
+-+++ /usr/local/share/snmp/rfc/RDBMS-MIB.txt Tue Jan 23 00:24:04 2001
++diff -ru /usr/local/share/snmp/rfc.orig/RDBMS-MIB /usr/local/share/snmp/rfc/RDBMS-MIB
++--- /usr/local/share/snmp/rfc.orig/RDBMS-MIB Sat Mar 3 17:16:41 2001
+++++ /usr/local/share/snmp/rfc/RDBMS-MIB Tue Jan 23 00:24:04 2001
+ @@ -6,8 +6,8 @@
+ FROM SNMPv2-SMI
+ DisplayString, DateAndTime, AutonomousType
+@@ -419,10 +418,10 @@
+ MODULE RDBMS-MIB
+ MANDATORY-GROUPS { rdbmsGroup }
+
+-Only in /usr/local/share/snmp/rfc: RFC-1215.txt
+-diff -ru /usr/local/share/snmp/rfc.orig/RFC1414-MIB.txt /usr/local/share/snmp/rfc/RFC1414-MIB.txt
+---- /usr/local/share/snmp/rfc.orig/RFC1414-MIB.txt Sat Mar 3 17:14:37 2001
+-+++ /usr/local/share/snmp/rfc/RFC1414-MIB.txt Tue Feb 20 00:25:21 2001
++Only in /usr/local/share/snmp/rfc: RFC-1215
++diff -ru /usr/local/share/snmp/rfc.orig/RFC1414-MIB /usr/local/share/snmp/rfc/RFC1414-MIB
++--- /usr/local/share/snmp/rfc.orig/RFC1414-MIB Sat Mar 3 17:14:37 2001
+++++ /usr/local/share/snmp/rfc/RFC1414-MIB Tue Feb 20 00:25:21 2001
+ @@ -3,6 +3,7 @@
+ IMPORTS
+ OBJECT-TYPE
+@@ -431,9 +430,9 @@
+ tcpConnLocalAddress, tcpConnLocalPort,
+ tcpConnRemAddress, tcpConnRemPort
+ FROM RFC1213-MIB;
+-diff -ru /usr/local/share/snmp/rfc.orig/SNA-NAU-MIB.txt /usr/local/share/snmp/rfc/SNA-NAU-MIB.txt
+---- /usr/local/share/snmp/rfc.orig/SNA-NAU-MIB.txt Sat Mar 3 17:16:24 2001
+-+++ /usr/local/share/snmp/rfc/SNA-NAU-MIB.txt Mon Jan 22 23:57:44 2001
++diff -ru /usr/local/share/snmp/rfc.orig/SNA-NAU-MIB /usr/local/share/snmp/rfc/SNA-NAU-MIB
++--- /usr/local/share/snmp/rfc.orig/SNA-NAU-MIB Sat Mar 3 17:16:24 2001
+++++ /usr/local/share/snmp/rfc/SNA-NAU-MIB Mon Jan 22 23:57:44 2001
+ @@ -17,7 +17,7 @@
+ DisplayString, RowStatus, TimeStamp, InstancePointer
+ FROM SNMPv2-TC
+@@ -443,9 +442,9 @@
+ OBJECT-TYPE, MODULE-IDENTITY, NOTIFICATION-TYPE
+ FROM SNMPv2-SMI
+
+-diff -ru /usr/local/share/snmp/rfc.orig/TCPIPX-MIB.txt /usr/local/share/snmp/rfc/TCPIPX-MIB.txt
+---- /usr/local/share/snmp/rfc.orig/TCPIPX-MIB.txt Sat Mar 3 17:17:17 2001
+-+++ /usr/local/share/snmp/rfc/TCPIPX-MIB.txt Sat Mar 3 16:51:11 2001
++diff -ru /usr/local/share/snmp/rfc.orig/TCPIPX-MIB /usr/local/share/snmp/rfc/TCPIPX-MIB
++--- /usr/local/share/snmp/rfc.orig/TCPIPX-MIB Sat Mar 3 17:17:17 2001
+++++ /usr/local/share/snmp/rfc/TCPIPX-MIB Sat Mar 3 16:51:11 2001
+ @@ -1,6 +1,8 @@
+ TCPIPX-MIB DEFINITIONS ::= BEGIN
+
+@@ -464,9 +463,9 @@
+
+ -- TCP/IPX MIB object idenfifiers
+
+-diff -ru /usr/local/share/snmp/rfc.orig/UPS-MIB.txt /usr/local/share/snmp/rfc/UPS-MIB.txt
+---- /usr/local/share/snmp/rfc.orig/UPS-MIB.txt Sat Mar 3 17:16:01 2001
+-+++ /usr/local/share/snmp/rfc/UPS-MIB.txt Mon Jan 22 23:55:45 2001
++diff -ru /usr/local/share/snmp/rfc.orig/UPS-MIB /usr/local/share/snmp/rfc/UPS-MIB
++--- /usr/local/share/snmp/rfc.orig/UPS-MIB Sat Mar 3 17:16:01 2001
+++++ /usr/local/share/snmp/rfc/UPS-MIB Mon Jan 22 23:55:45 2001
+ @@ -2,7 +2,7 @@
+
+ IMPORTS
+@@ -476,9 +475,9 @@
+ FROM SNMPv2-SMI
+ DisplayString, TimeStamp, TimeInterval, TestAndIncr,
+ AutonomousType
+-diff -ru /usr/local/share/snmp/rfc.orig/SMUX-MIB.txt /usr/local/share/snmp/rfc/SMUX-MIB.txt
+---- /usr/local/share/snmp/rfc.orig/SMUX-MIB.txt 2002-06-15 15:31:22.000000000 +0200
+-+++ /usr/local/share/snmp/rfc/SMUX-MIB.txt 2002-06-15 15:31:22.000000000 +0200
++diff -ru /usr/local/share/snmp/rfc.orig/SMUX-MIB /usr/local/share/snmp/rfc/SMUX-MIB
++--- /usr/local/share/snmp/rfc.orig/SMUX-MIB 2002-06-15 15:31:22.000000000 +0200
+++++ /usr/local/share/snmp/rfc/SMUX-MIB 2002-06-15 15:31:22.000000000 +0200
+ @@ -3,6 +3,8 @@
+ IMPORTS
+ enterprises
+Index: net-snmp-5.4.2.1/mibs/rfclist
+===================================================================
+--- net-snmp-5.4.2.1.orig/mibs/rfclist 2009-11-06 18:25:23.000000000 +0100
++++ net-snmp-5.4.2.1/mibs/rfclist 2009-11-06 18:26:07.000000000 +0100
+@@ -1,4 +1,4 @@
+-# updated 2005-03-14
++# updated 2007-10-15
+ 1155 RFC1155-SMI
+ 1213 RFC1213-MIB
+ 1227 SMUX-MIB
+@@ -6,6 +6,8 @@
+ 1381 RFC1381-MIB
+ 1382 RFC1382-MIB
+ 1414 RFC1414-MIB
++1447 SNMPv2-PARTY-MIB
++1451 SNMPv2-M2M-MIB
+ 1461 MIOX25-MIB
+ 1471 PPP-LCP-MIB
+ 1472 PPP-SEC-MIB
+@@ -16,10 +18,11 @@
+ 1525 SOURCE-ROUTING-MIB
+ 1559 DECNET-PHIV-MIB
+ 1567 DSA-MIB
++1592 DPI20-MIB
++1593 IBM-6611-APPN-MIB
+ 1611 DNS-SERVER-MIB
+ 1612 DNS-RESOLVER-MIB
+ 1628 UPS-MIB
+-1657 BGP4-MIB
+ 1658 CHARACTER-MIB
+ 1659 RS-232-MIB
+ 1660 PARALLEL-MIB
+@@ -33,10 +36,9 @@
+ 1748 TOKENRING-MIB
+ 1749 TOKENRING-STATION-SR-MIB
+ 1792 TCPIPX-MIB
+-1850 OSPF-MIB:OSPF-TRAP-MIB
++1910 SNMPv2-USEC-MIB
+ 2006 MIP-MIB
+ 2020 DOT12-IF-MIB
+-2021 RMON2-MIB
+ 2024 DLSW-MIB
+ 2051 APPC-MIB
+ 2108 SNMP-REPEATER-MIB
+@@ -51,17 +53,15 @@
+ 2266 DOT12-RPTR-MIB
+ 2287 SYSAPPL-MIB
+ 2320 IPOA-MIB
+-2366 IPATM-IPMC-MIB
++2417 IPATM-IPMC-MIB
+ 2452 IPV6-TCP-MIB
+ 2454 IPV6-UDP-MIB
+ 2455 APPN-MIB
+ 2456 APPN-TRAP-MIB
+ 2457 EBN-MIB
+-2465 IPV6-TC:IPV6-MIB
++2465 IPV6-MIB:IPV6-TC
+ 2466 IPV6-ICMP-MIB
+ 2494 DS0-MIB:DS0BUNDLE-MIB
+-2495 DS1-MIB
+-2496 DS3-MIB
+ 2512 ATM-ACCOUNTING-INFORMATION-MIB
+ 2513 ACCOUNTING-CONTROL-MIB
+ 2514 ATM-TC-MIB
+@@ -69,7 +69,6 @@
+ 2561 TN3270E-MIB
+ 2562 TN3270E-RT-MIB
+ 2564 APPLICATION-MIB
+-2576 SNMP-COMMUNITY-MIB
+ 2578 SNMPv2-SMI
+ 2579 SNMPv2-TC
+ 2580 SNMPv2-CONF
+@@ -77,15 +76,8 @@
+ 2594 WWW-MIB
+ 2605 DIRECTORY-SERVER-MIB
+ 2613 SMON-MIB
+-2618 RADIUS-AUTH-CLIENT-MIB
+-2619 RADIUS-AUTH-SERVER-MIB
+-2620 RADIUS-ACC-CLIENT-MIB
+-2621 RADIUS-ACC-SERVER-MIB
+-2662 ADSL-TC-MIB:ADSL-LINE-MIB
++2662 ADSL-LINE-MIB:ADSL-TC-MIB
+ 2666 ETHER-CHIPSET-MIB
+-2669 DOCS-CABLE-DEVICE-MIB
+-2670 DOCS-IF-MIB
+-2674 P-BRIDGE-MIB:Q-BRIDGE-MIB
+ 2677 NHRP-MIB
+ 2707 Job-Monitoring-MIB
+ 2720 FLOW-METER-MIB
+@@ -102,7 +94,6 @@
+ 2863 IF-MIB
+ 2864 IF-INVERTED-STACK-MIB
+ 2922 PTOPO-MIB
+-2925 DISMAN-PING-MIB:DISMAN-TRACEROUTE-MIB:DISMAN-NSLOOKUP-MIB
+ 2932 IPMROUTE-STD-MIB
+ 2933 IGMP-STD-MIB
+ 2934 PIM-MIB
+@@ -119,19 +110,21 @@
+ 3083 DOCS-BPI-MIB
+ 3144 INTERFACETOPN-MIB
+ 3165 DISMAN-SCRIPT-MIB
++3176 SFLOW-MIB
+ 3201 CIRCUIT-IF-MIB
+ 3202 FRSLD-MIB
+ 3231 DISMAN-SCHEDULE-MIB
+ 3273 HC-RMON-MIB
+-3276 HDSL2-SHDSL-LINE-MIB
++3287 DSMON-MIB
+ 3289 DIFFSERV-DSCP-TC:DIFFSERV-MIB
+ 3295 GSMP-MIB
+-3371 L2TP-MIB
++3371 L2TP-MIB
+ 3411 SNMP-FRAMEWORK-MIB
+ 3412 SNMP-MPD-MIB
+-3413 SNMP-TARGET-MIB:SNMP-NOTIFICATION-MIB:SNMP-PROXY-MIB
++3413 SNMP-NOTIFICATION-MIB:SNMP-PROXY-MIB:SNMP-TARGET-MIB
+ 3414 SNMP-USER-BASED-SM-MIB
+ 3415 SNMP-VIEW-BASED-ACM-MIB
++3416 SNMPv2-PDU
+ 3417 SNMPv2-TM
+ 3418 SNMPv2-MIB
+ 3419 TRANSPORT-ADDRESS-MIB
+@@ -140,6 +133,7 @@
+ 3440 ADSL-LINE-EXT-MIB
+ 3498 APS-MIB
+ 3559 MALLOC-MIB
++3584 SNMP-COMMUNITY-MIB
+ 3591 OPT-IF-MIB
+ 3592 SONET-MIB
+ 3593 PerfHist-TC-MIB
+@@ -147,25 +141,24 @@
+ 3606 ATM2-MIB
+ 3621 POWER-ETHERNET-MIB
+ 3635 EtherLike-MIB
+-3636 MAU-MIB
+-3637 ETHER-WIS
+ 3705 HC-PerfHist-TC-MIB
+ 3728 VDSL-LINE-MIB
+ 3729 APM-MIB
+ 3747 DIFFSERV-CONFIG-MIB
+ 3805 Printer-MIB
+ 3806 Finisher-MIB
+-# 3808 IANA-CHARSET-MIB
+ 3811 MPLS-TC-STD-MIB
+ 3812 MPLS-TE-STD-MIB
+ 3813 MPLS-LSR-STD-MIB
+ 3814 MPLS-FTN-STD-MIB
+-3815 MPLS-LDP-STD-MIB:MPLS-LDP-ATM-STD-MIB:MPLS-LDP-FRAME-RELAY-STD-MIB:MPLS-LDP-GENERIC-STD-MIB
+-3816 ROHC-MIB:ROHC-UNCOMPRESSED-MIB:ROHC-RTP-MIB
++3815 MPLS-LDP-ATM-STD-MIB:MPLS-LDP-FRAME-RELAY-STD-MIB:MPLS-LDP-GENERIC-STD-MIB:MPLS-LDP-STD-MIB
++3816 ROHC-MIB:ROHC-RTP-MIB:ROHC-UNCOMPRESSED-MIB
+ 3826 SNMP-USM-AES-MIB
++3872 TRIP-MIB:TRIP-TC-MIB
+ 3873 SCTP-MIB
+-3877 ALARM-MIB:ITU-ALARM-TC-MIB:ITU-ALARM-MIB
++3877 ALARM-MIB:ITU-ALARM-MIB:ITU-ALARM-TC-MIB
+ 3878 ARC-MIB
++3896 DS3-MIB
+ 3970 TE-MIB
+ 4001 INET-ADDRESS-MIB
+ 4008 NAT-MIB
+@@ -180,9 +173,64 @@
+ 4131 DOCS-IETF-BPI2-MIB
+ 4133 ENTITY-MIB
+ 4149 SSPM-MIB
++4150 TPM-MIB
+ 4188 BRIDGE-MIB
+ 4220 TE-LINK-STD-MIB
+ 4265 VPN-TC-STD-MIB
+-4268 ENTITY-STATE-TC-MIB:ENTITY-STATE-MIB
++4268 ENTITY-STATE-MIB:ENTITY-STATE-TC-MIB
++4273 BGP4-MIB
+ 4292 IP-FORWARD-MIB
+ 4293 IP-MIB
++4295 MOBILEIPV6-MIB
++4318 RSTP-MIB
++4319 HDSL2-SHDSL-LINE-MIB
++4323 DOCS-IETF-QOS-MIB
++4363 P-BRIDGE-MIB:Q-BRIDGE-MIB
++4368 MPLS-LC-ATM-STD-MIB:MPLS-LC-FR-STD-MIB
++4369 IFCP-MGMT-MIB
++4382 MPLS-L3VPN-STD-MIB
++4404 FCIP-MGMT-MIB
++4438 T11-FC-NAME-SERVER-MIB
++4439 T11-FC-FABRIC-ADDR-MGR-MIB:T11-TC-MIB
++4444 ISIS-MIB
++4455 SCSI-MIB
++4498 AGGREGATE-MIB:TIME-AGGREGATE-MIB
++4502 RMON2-MIB
++4544 ISCSI-MIB
++4545 IPS-AUTH-MIB
++4546 DOCS-IF-MIB
++4547 DOCS-IETF-CABLE-DEVICE-NOTIFICATION-MIB
++4560 DISMAN-NSLOOKUP-MIB:DISMAN-PING-MIB:DISMAN-TRACEROUTE-MIB
++4624 MSDP-MIB
++4625 T11-FC-ROUTE-MIB
++4626 T11-FC-FSPF-MIB
++4631 LMP-MIB
++4639 DOCS-CABLE-DEVICE-MIB
++4668 RADIUS-AUTH-CLIENT-MIB
++4669 RADIUS-AUTH-SERVER-MIB
++4670 RADIUS-ACC-CLIENT-MIB
++4671 RADIUS-ACC-SERVER-MIB
++4672 RADIUS-DYNAUTH-CLIENT-MIB
++4673 RADIUS-DYNAUTH-SERVER-MIB
++4682 PKTC-IETF-MTA-MIB
++4706 ADSL2-LINE-MIB:ADSL2-LINE-TC-MIB
++4711 RAQMON-MIB
++4712 RAQMON-RDS-MIB
++4747 T11-FC-VIRTUAL-FABRIC-MIB
++4750 OSPF-MIB:OSPF-TRAP-MIB
++4780 SIP-COMMON-MIB:SIP-SERVER-MIB:SIP-TC-MIB:SIP-UA-MIB
++4789 SNMP-IEEE802-TM-MIB
++4801 GMPLS-TC-STD-MIB
++4802 GMPLS-TE-STD-MIB
++4803 GMPLS-LABEL-STD-MIB:GMPLS-LSR-STD-MIB
++4805 DS1-MIB
++4807 IPSEC-SPD-MIB
++4836 MAU-MIB
++4837 DOT3-EPON-MIB
++4878 DOT3-OAM-MIB
++4898 TCP-ESTATS-MIB
++4935 T11-FC-FABRIC-CONFIG-SERVER-MIB
++4936 T11-FC-FABRIC-LOCK-MIB:T11-FC-ZONE-SERVER-MIB
++4939 ISNS-MIB
++4983 T11-FC-RSCN-MIB
++5017 URI-TC-MIB
Modified: branches/net-snmp54/debian/patches/series
===================================================================
--- branches/net-snmp54/debian/patches/series 2009-11-06 18:09:35 UTC (rev 294)
+++ branches/net-snmp54/debian/patches/series 2009-11-06 18:11:10 UTC (rev 295)
@@ -11,3 +11,4 @@
44_nlist_kvm.patch
56_manpage.patch
57_fix_ipv6_memleak.patch
+58_download_mibs.patch
Modified: branches/net-snmp54/debian/rules
===================================================================
--- branches/net-snmp54/debian/rules 2009-11-06 18:09:35 UTC (rev 294)
+++ branches/net-snmp54/debian/rules 2009-11-06 18:11:10 UTC (rev 295)
@@ -51,6 +51,7 @@
--with-mib-modules="$(MIB_MODULES)" \
--enable-mfd-rewrites \
--with-mnttab=/etc/mtab \
+ --with-mibdirs="\$HOME/.snmp/mibs:/usr/share/mibs/iana:/usr/share/mibs/ietf:/usr/share/mibs/netsnmp" \
--with-defaults
pre-build::
Modified: branches/net-snmp54/debian/snmpd.default
===================================================================
--- branches/net-snmp54/debian/snmpd.default 2009-11-06 18:09:35 UTC (rev 294)
+++ branches/net-snmp54/debian/snmpd.default 2009-11-06 18:11:10 UTC (rev 295)
@@ -2,7 +2,7 @@
# MIB directories. /usr/share/snmp/mibs is the default, but
# including it here avoids some strange problems.
-export MIBDIRS=/usr/share/snmp/mibs
+export MIBDIRS=/usr/share/mibs/iana:/usr/share/mibs/ietf:/usr/share/mibs/netsnmp
# snmpd control (yes means start daemon).
SNMPDRUN=yes
Modified: branches/net-snmp54/debian/snmpd.init
===================================================================
--- branches/net-snmp54/debian/snmpd.init 2009-11-06 18:09:35 UTC (rev 294)
+++ branches/net-snmp54/debian/snmpd.init 2009-11-06 18:11:10 UTC (rev 295)
@@ -21,7 +21,7 @@
test -x /usr/sbin/snmptrapd || exit 0
# Defaults
-export MIBDIRS=/usr/share/snmp/mibs
+export MIBDIRS=/usr/share/mibs/iana:/usr/share/mibs/ietf:/usr/share/mibs/netsnmp
SNMPDRUN=yes
SNMPDOPTS='-Lsd -Lf /dev/null -p /var/run/snmpd.pid'
TRAPDRUN=no
Modified: branches/net-snmp54-dev/debian/control
===================================================================
--- branches/net-snmp54-dev/debian/control 2009-11-06 18:09:35 UTC (rev 294)
+++ branches/net-snmp54-dev/debian/control 2009-11-06 18:11:10 UTC (rev 295)
@@ -46,7 +46,7 @@
Replaces: snmp (<=3.6.2-3), libsnmp, zebra, zebra-pj, quagga, libsnmp-dev (<< 5.4~dfsg), libsnmp9-dev (<< 5.4~dfsg), libsnmp5-dev
Provides: libsnmp
Conflicts: libsnmp, libsnmp-dev (<< 5.4~dfsg), libsnmp9-dev (<< 5.4~dfsg), libsnmp5-dev
-Depends: ${misc:Depends}
+Depends: ${misc:Depends}, gawk, wget
Description: SNMP (Simple Network Management Protocol) MIBs and documentation
The Simple Network Management Protocol (SNMP) provides a framework
for the exchange of management information between agents (servers)
Added: branches/net-snmp54-dev/debian/libsnmp-base.config
===================================================================
--- branches/net-snmp54-dev/debian/libsnmp-base.config (rev 0)
+++ branches/net-snmp54-dev/debian/libsnmp-base.config 2009-11-06 18:11:10 UTC (rev 295)
@@ -0,0 +1,12 @@
+#!/bin/sh
+
+set -e
+
+. /usr/share/debconf/confmodule
+
+db_version 2.0
+
+db_input high libsnmp-base/download_mibs || true
+db_go
+
+exit 0
Added: branches/net-snmp54-dev/debian/libsnmp-base.postinst
===================================================================
--- branches/net-snmp54-dev/debian/libsnmp-base.postinst (rev 0)
+++ branches/net-snmp54-dev/debian/libsnmp-base.postinst 2009-11-06 18:11:10 UTC (rev 295)
@@ -0,0 +1,13 @@
+#!/bin/sh
+
+set -e
+
+. /usr/share/debconf/confmodule
+db_version 2.0
+
+db_get libsnmp-base/download_mibs
+if [ "$RET" = "true" ]; then
+ cd /usr/share/mibs; make -f Makefile.mib
+fi
+
+#DEBHELPER#
Modified: branches/net-snmp54-dev/debian/libsnmp-base.prerm
===================================================================
--- branches/net-snmp54-dev/debian/libsnmp-base.prerm 2009-11-06 18:09:35 UTC (rev 294)
+++ branches/net-snmp54-dev/debian/libsnmp-base.prerm 2009-11-06 18:11:10 UTC (rev 295)
@@ -2,7 +2,9 @@
set -e
-rm -f /usr/share/snmp/mibs/.index
+rm -f /usr/share/mibs/netsnmp/.index
+rm -f /usr/share/mibs/ietf/.index
+rm -f /usr/share/mibs/iana/.index
#DEBHELPER#
Added: branches/net-snmp54-dev/debian/libsnmp-base.templates
===================================================================
--- branches/net-snmp54-dev/debian/libsnmp-base.templates (rev 0)
+++ branches/net-snmp54-dev/debian/libsnmp-base.templates 2009-11-06 18:11:10 UTC (rev 295)
@@ -0,0 +1,6 @@
+Template: libsnmp-base/download_mibs
+Type: boolean
+_Description: Download and extract MIBs from RFCs and IANA?
+ Various snmp software needs extracted MIBs from RFCs and IANA -
+ which cannot be shipped - to be working. These MIBs can be
+ automatically fetched and extracted as part of installing this package.
Modified: branches/net-snmp54-dev/debian/patches/03_makefiles.patch
===================================================================
--- branches/net-snmp54-dev/debian/patches/03_makefiles.patch 2009-11-06 18:09:35 UTC (rev 294)
+++ branches/net-snmp54-dev/debian/patches/03_makefiles.patch 2009-11-06 18:11:10 UTC (rev 295)
@@ -1,7 +1,7 @@
Index: net-snmp-5.4.2.1/local/Makefile.in
===================================================================
---- net-snmp-5.4.2.1.orig/local/Makefile.in 2009-11-06 15:03:06.000000000 +0100
-+++ net-snmp-5.4.2.1/local/Makefile.in 2009-11-06 15:05:53.000000000 +0100
+--- net-snmp-5.4.2.1.orig/local/Makefile.in 2009-11-06 17:21:05.000000000 +0100
++++ net-snmp-5.4.2.1/local/Makefile.in 2009-11-06 17:25:10.000000000 +0100
@@ -100,7 +100,7 @@
mib2c.made: $(srcdir)/mib2c
@@ -13,11 +13,14 @@
fi
Index: net-snmp-5.4.2.1/Makefile.top
===================================================================
---- net-snmp-5.4.2.1.orig/Makefile.top 2009-11-06 15:03:06.000000000 +0100
-+++ net-snmp-5.4.2.1/Makefile.top 2009-11-06 15:05:53.000000000 +0100
-@@ -26,6 +26,7 @@
+--- net-snmp-5.4.2.1.orig/Makefile.top 2009-11-06 17:21:05.000000000 +0100
++++ net-snmp-5.4.2.1/Makefile.top 2009-11-06 17:25:41.000000000 +0100
+@@ -24,8 +24,9 @@
+ man5dir = $(mandir)/man5
+ man8dir = $(mandir)/man8
snmplibdir = $(datadir)/snmp
- mibdir = $(snmplibdir)/mibs
+-mibdir = $(snmplibdir)/mibs
++mibdir = $(datadir)/mibs/netsnmp
persistentdir = @PERSISTENT_DIRECTORY@
+sysconfdir = @sysconfdir@
DESTDIR = @INSTALL_PREFIX@
@@ -25,17 +28,21 @@
Index: net-snmp-5.4.2.1/mibs/Makefile.in
===================================================================
---- net-snmp-5.4.2.1.orig/mibs/Makefile.in 2009-11-06 15:03:06.000000000 +0100
-+++ net-snmp-5.4.2.1/mibs/Makefile.in 2009-11-06 15:07:25.000000000 +0100
-@@ -13,57 +13,35 @@
+--- net-snmp-5.4.2.1.orig/mibs/Makefile.in 2009-11-06 17:21:05.000000000 +0100
++++ net-snmp-5.4.2.1/mibs/Makefile.in 2009-11-06 17:25:10.000000000 +0100
+@@ -13,53 +13,33 @@
OTHERUNINSTALL=mibsuninstall
-V1MIBS = RFC1155-SMI.txt RFC1213-MIB.txt RFC-1215.txt
--
++NETSNMPMIBS = NET-SNMP-TC NET-SNMP-MIB NET-SNMP-AGENT-MIB \
++ NET-SNMP-EXAMPLES-MIB NET-SNMP-EXTEND-MIB
+
-V2MIBS = SNMPv2-CONF.txt SNMPv2-SMI.txt SNMPv2-TC.txt SNMPv2-TM.txt \
- SNMPv2-MIB.txt
--
++UCDMIBS = UCD-SNMP-MIB UCD-DEMO-MIB UCD-IPFWACC-MIB \
++ UCD-DLMOD-MIB UCD-DISKIO-MIB
+
-V3MIBS = SNMP-FRAMEWORK-MIB.txt SNMP-MPD-MIB.txt SNMP-TARGET-MIB.txt \
- SNMP-NOTIFICATION-MIB.txt SNMP-PROXY-MIB.txt \
- SNMP-USER-BASED-SM-MIB.txt SNMP-VIEW-BASED-ACM-MIB.txt \
@@ -60,20 +67,19 @@
- SNMP-USM-DH-OBJECTS-MIB.txt \
- SCTP-MIB.txt
-
- NETSNMPMIBS = NET-SNMP-TC.txt NET-SNMP-MIB.txt NET-SNMP-AGENT-MIB.txt \
- NET-SNMP-EXAMPLES-MIB.txt NET-SNMP-EXTEND-MIB.txt
-
- UCDMIBS = UCD-SNMP-MIB.txt UCD-DEMO-MIB.txt UCD-IPFWACC-MIB.txt \
- UCD-DLMOD-MIB.txt UCD-DISKIO-MIB.txt
-
+-NETSNMPMIBS = NET-SNMP-TC.txt NET-SNMP-MIB.txt NET-SNMP-AGENT-MIB.txt \
+- NET-SNMP-EXAMPLES-MIB.txt NET-SNMP-EXTEND-MIB.txt
+-
+-UCDMIBS = UCD-SNMP-MIB.txt UCD-DEMO-MIB.txt UCD-IPFWACC-MIB.txt \
+- UCD-DLMOD-MIB.txt UCD-DISKIO-MIB.txt
+-
-DEFAULTMIBS = @default_mibs_install@
-+EXTRAMIBS = BGP4-MIB.txt BRIDGE-MIB.txt GNOME-SMI.txt OSPF-MIB.txt \
-+ OSPF-TRAP-MIB.txt RIPv2-MIB.txt SOURCE-ROUTING-MIB.txt \
-+ LM-SENSORS-MIB.txt
-
+-
-MIBS = $(V1MIBS) $(V2MIBS) $(V3MIBS) $(RFCMIBS) \
- $(AGENTMIBS) $(IANAMIBS) \
- $(NETSNMPMIBS) $(UCDMIBS) $(DEFAULTMIBS)
++EXTRAMIBS = GNOME-SMI LM-SENSORS-MIB
++
+MIBS = $(NETSNMPMIBS) $(UCDMIBS) $(EXTRAMIBS)
+
+HELPERS = Makefile.mib ianalist rfclist rfcmibs.diff
@@ -83,51 +89,37 @@
mibsinstall: installdirs
- @for i in $(MIBS) ; do \
-+ @for i in $(MIBS) $(HELPERS) ; do \
- $(INSTALL_DATA) $(srcdir)/$$i $(INSTALL_PREFIX)$(mibdir) ; \
- echo "install: installed $$i in $(INSTALL_PREFIX)$(mibdir)" ; \
- done
-+ @for i in $(BINHELPERS) ; do \
-+ $(INSTALL) $(srcdir)/$$i $(INSTALL_PREFIX)$(mibdir) ; \
-+ echo "install: installed $$i in $(INSTALL_PREFIX)$(mibdir)" ; \
+- $(INSTALL_DATA) $(srcdir)/$$i $(INSTALL_PREFIX)$(mibdir) ; \
+- echo "install: installed $$i in $(INSTALL_PREFIX)$(mibdir)" ; \
++ @for i in $(MIBS); do \
++ $(INSTALL_DATA) $(srcdir)/$$i.txt $(INSTALL_PREFIX)$(mibdir)/$$i ; \
++ echo "install: installed $$i.txt in $(INSTALL_PREFIX)$(mibdir)/$$i" ; \
+ done
++ @for i in $(HELPERS); do \
++ $(INSTALL_DATA) $(srcdir)/$$i $(INSTALL_PREFIX)$(datadir)/mibs ; \
++ echo "install: installed $$i in $(INSTALL_PREFIX)$(datadir)/mibs" ; \
++ done
++ @for i in $(BINHELPERS) ; do \
++ $(INSTALL) $(srcdir)/$$i $(INSTALL_PREFIX)$(datadir)/mibs ; \
++ echo "install: installed $$i in $(INSTALL_PREFIX)$(datadir)/mibs" ; \
+ done
mibsuninstall: installdirs
-- @for i in $(MIBS) ; do \
-+ @for i in $(MIBS) $(HELPERS) $(BINHELPERS) ; do \
+@@ -67,6 +47,10 @@
rm -f $(INSTALL_PREFIX)$(mibdir)/$$i ; \
echo "removed $$i from $(INSTALL_PREFIX)$(mibdir)" ; \
done
-Index: net-snmp-5.4.2.1/mibs/Makefile.mib
-===================================================================
---- net-snmp-5.4.2.1.orig/mibs/Makefile.mib 2009-11-06 15:03:06.000000000 +0100
-+++ net-snmp-5.4.2.1/mibs/Makefile.mib 2009-11-06 15:05:53.000000000 +0100
-@@ -5,9 +5,9 @@
- IANAHOST = http://www.iana.org
- IANADIR = assignments
++ @for i in $(HELPERS) $(BINHELPERS) ; do \
++ rm -f $(INSTALL_PREFIX)$(mibdir)/$$i ; \
++ echo "removed $$i from $(INSTALL_PREFIX)$(datadir)/mibs" ; \
++ done
--PREFIX = /usr/local
--ALLDIR = $(PREFIX)/share/snmp/rfc.orig
--INSTDIR = $(PREFIX)/share/snmp/rfc
-+PREFIX = /usr
-+ALLDIR = /var/tmp/rfc.orig
-+INSTDIR = $(PREFIX)/share/snmp/mibs
-
- MIBS = SNMPv2-TC.txt SNMPv2-TM.txt SNMPv2-SMI.txt SNMPv2-MIB.txt \
- SNMPv2-CONF.txt HCNUM-TC.txt INET-ADDRESS-MIB.txt \
-@@ -158,7 +158,7 @@
- RFC1213-MIB.txt: $(MIBDEPS)
- ./mibfetch $(RFCHOST) $(RFCDIR) 1213
-
--SCTP.txt: $(MIBDEPS)
-+SCTP-MIB.txt: $(MIBDEPS)
- ./mibfetch $(RFCHOST) $(RFCDIR) 3873
-
- ianamibs: ianalist
+ installdirs:
+ @$(SHELL) $(srcdir)/../mkinstalldirs $(INSTALL_PREFIX)$(mibdir)
Index: net-snmp-5.4.2.1/Makefile.in
===================================================================
---- net-snmp-5.4.2.1.orig/Makefile.in 2009-11-06 15:03:06.000000000 +0100
-+++ net-snmp-5.4.2.1/Makefile.in 2009-11-06 15:05:53.000000000 +0100
+--- net-snmp-5.4.2.1.orig/Makefile.in 2009-11-06 17:21:05.000000000 +0100
++++ net-snmp-5.4.2.1/Makefile.in 2009-11-06 17:25:10.000000000 +0100
@@ -156,7 +156,7 @@
#
# override LD_RUN_PATH to avoid dependencies on the build directory
Modified: branches/net-snmp54-dev/debian/patches/06_extramibs.patch
===================================================================
--- branches/net-snmp54-dev/debian/patches/06_extramibs.patch 2009-11-06 18:09:35 UTC (rev 294)
+++ branches/net-snmp54-dev/debian/patches/06_extramibs.patch 2009-11-06 18:11:10 UTC (rev 295)
@@ -1,2015 +1,3 @@
-diff -ruN net-snmp-5.4.1.orig/mibs/BGP4-MIB.txt net-snmp-5.4.1/mibs/BGP4-MIB.txt
---- net-snmp-5.4.1.orig/mibs/BGP4-MIB.txt 1970-01-01 01:00:00.000000000 +0100
-+++ net-snmp-5.4.1/mibs/BGP4-MIB.txt 2007-09-20 16:30:52.000000000 +0200
-@@ -0,0 +1,929 @@
-+ BGP4-MIB DEFINITIONS ::= BEGIN
-+
-+ IMPORTS
-+ MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE,
-+ IpAddress, Integer32, Counter32, Gauge32, mib-2
-+ FROM SNMPv2-SMI
-+ MODULE-COMPLIANCE, OBJECT-GROUP, NOTIFICATION-GROUP
-+ FROM SNMPv2-CONF;
-+
-+ bgp MODULE-IDENTITY
-+ LAST-UPDATED "9902100000Z"
-+ ORGANIZATION "IETF IDR Working Group"
-+ CONTACT-INFO "E-mail: idr at merit.net
-+
-+ Susan Hares (Editor)
-+ Merit Network
-+ 4251 Plymouth Road
-+ Suite C
-+ Ann Arbor, MI 48105-2785
-+ Tel: +1 734 936 2095
-+ Fax: +1 734 647 3185
-+ E-mail: skh at merit.edu
-+
-+ Jeff Johnson (Editor)
-+ RedBack Networks, Inc.
-+ 1389 Moffett Park Drive
-+ Sunnyvale, CA 94089-1134
-+ Tel: +1 408 548 3516
-+ Fax: +1 408 548 3599
-+ E-mail: jeff at redback.com"
-+ DESCRIPTION
-+ "The MIB module for BGP-4."
-+ REVISION "9902100000Z"
-+ DESCRIPTION
-+ "Corrected duplicate OBJECT IDENTIFIER
-+ assignment in the conformance information."
-+ REVISION "9601080000Z"
-+ DESCRIPTION
-+ "1) Fixed the definitions of the traps to
-+ make them equivalent to their initial
-+ definition in RFC 1269.
-+ 2) Added compliance and conformance info."
-+ ::= { mib-2 15 }
-+
-+ bgpVersion OBJECT-TYPE
-+ SYNTAX OCTET STRING (SIZE (1..255))
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "Vector of supported BGP protocol version
-+ numbers. Each peer negotiates the version
-+ from this vector. Versions are identified
-+ via the string of bits contained within this
-+ object. The first octet contains bits 0 to
-+ 7, the second octet contains bits 8 to 15,
-+ and so on, with the most significant bit
-+ referring to the lowest bit number in the
-+ octet (e.g., the MSB of the first octet
-+ refers to bit 0). If a bit, i, is present
-+ and set, then the version (i+1) of the BGP
-+ is supported."
-+ ::= { bgp 1 }
-+
-+ bgpLocalAs OBJECT-TYPE
-+ SYNTAX INTEGER (0..65535)
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "The local autonomous system number."
-+ ::= { bgp 2 }
-+
-+
-+
-+ -- BGP Peer table. This table contains, one entry per BGP
-+ -- peer, information about the BGP peer.
-+
-+ bgpPeerTable OBJECT-TYPE
-+ SYNTAX SEQUENCE OF BgpPeerEntry
-+ MAX-ACCESS not-accessible
-+ STATUS current
-+ DESCRIPTION
-+ "BGP peer table. This table contains,
-+ one entry per BGP peer, information about the
-+ connections with BGP peers."
-+ ::= { bgp 3 }
-+
-+ bgpPeerEntry OBJECT-TYPE
-+ SYNTAX BgpPeerEntry
-+ MAX-ACCESS not-accessible
-+ STATUS current
-+ DESCRIPTION
-+ "Entry containing information about the
-+ connection with a BGP peer."
-+ INDEX { bgpPeerRemoteAddr }
-+ ::= { bgpPeerTable 1 }
-+
-+ BgpPeerEntry ::= SEQUENCE {
-+ bgpPeerIdentifier
-+ IpAddress,
-+ bgpPeerState
-+ INTEGER,
-+ bgpPeerAdminStatus
-+ INTEGER,
-+ bgpPeerNegotiatedVersion
-+ Integer32,
-+ bgpPeerLocalAddr
-+ IpAddress,
-+ bgpPeerLocalPort
-+ INTEGER,
-+ bgpPeerRemoteAddr
-+ IpAddress,
-+ bgpPeerRemotePort
-+ INTEGER,
-+ bgpPeerRemoteAs
-+ INTEGER,
-+ bgpPeerInUpdates
-+ Counter32,
-+ bgpPeerOutUpdates
-+ Counter32,
-+ bgpPeerInTotalMessages
-+ Counter32,
-+ bgpPeerOutTotalMessages
-+ Counter32,
-+ bgpPeerLastError
-+ OCTET STRING,
-+ bgpPeerFsmEstablishedTransitions
-+ Counter32,
-+ bgpPeerFsmEstablishedTime
-+ Gauge32,
-+ bgpPeerConnectRetryInterval
-+ INTEGER,
-+ bgpPeerHoldTime
-+ INTEGER,
-+ bgpPeerKeepAlive
-+ INTEGER,
-+ bgpPeerHoldTimeConfigured
-+ INTEGER,
-+ bgpPeerKeepAliveConfigured
-+ INTEGER,
-+ bgpPeerMinASOriginationInterval
-+ INTEGER,
-+ bgpPeerMinRouteAdvertisementInterval
-+ INTEGER,
-+ bgpPeerInUpdateElapsedTime
-+ Gauge32
-+ }
-+
-+ bgpPeerIdentifier OBJECT-TYPE
-+ SYNTAX IpAddress
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "The BGP Identifier of this entry's BGP peer."
-+ ::= { bgpPeerEntry 1 }
-+
-+ bgpPeerState OBJECT-TYPE
-+ SYNTAX INTEGER {
-+ idle(1),
-+ connect(2),
-+ active(3),
-+ opensent(4),
-+ openconfirm(5),
-+ established(6)
-+ }
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "The BGP peer connection state."
-+ ::= { bgpPeerEntry 2 }
-+
-+ bgpPeerAdminStatus OBJECT-TYPE
-+ SYNTAX INTEGER {
-+ stop(1),
-+ start(2)
-+ }
-+ MAX-ACCESS read-write
-+ STATUS current
-+ DESCRIPTION
-+ "The desired state of the BGP connection. A
-+ transition from 'stop' to 'start' will cause
-+ the BGP Start Event to be generated. A
-+ transition from 'start' to 'stop' will cause
-+ the BGP Stop Event to be generated. This
-+ parameter can be used to restart BGP peer
-+ connections. Care should be used in providing
-+ write access to this object without adequate
-+ authentication."
-+ ::= { bgpPeerEntry 3 }
-+
-+ bgpPeerNegotiatedVersion OBJECT-TYPE
-+ SYNTAX Integer32
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "The negotiated version of BGP running between
-+ the two peers."
-+ ::= { bgpPeerEntry 4 }
-+
-+ bgpPeerLocalAddr OBJECT-TYPE
-+ SYNTAX IpAddress
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "The local IP address of this entry's BGP
-+ connection."
-+ ::= { bgpPeerEntry 5 }
-+
-+ bgpPeerLocalPort OBJECT-TYPE
-+ SYNTAX INTEGER (0..65535)
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "The local port for the TCP connection between
-+ the BGP peers."
-+ ::= { bgpPeerEntry 6 }
-+
-+ bgpPeerRemoteAddr OBJECT-TYPE
-+ SYNTAX IpAddress
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "The remote IP address of this entry's BGP
-+ peer."
-+ ::= { bgpPeerEntry 7 }
-+
-+ bgpPeerRemotePort OBJECT-TYPE
-+ SYNTAX INTEGER (0..65535)
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "The remote port for the TCP connection between
-+ the BGP peers. Note that the objects
-+ bgpPeerLocalAddr, bgpPeerLocalPort,
-+ bgpPeerRemoteAddr and bgpPeerRemotePort
-+ provide the appropriate reference to the
-+ standard MIB TCP connection table."
-+ ::= { bgpPeerEntry 8 }
-+
-+ bgpPeerRemoteAs OBJECT-TYPE
-+ SYNTAX INTEGER (0..65535)
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "The remote autonomous system number."
-+ ::= { bgpPeerEntry 9 }
-+
-+ bgpPeerInUpdates OBJECT-TYPE
-+ SYNTAX Counter32
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "The number of BGP UPDATE messages received on
-+ this connection. This object should be
-+ initialized to zero (0) when the connection is
-+ established."
-+ ::= { bgpPeerEntry 10 }
-+
-+ bgpPeerOutUpdates OBJECT-TYPE
-+ SYNTAX Counter32
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "The number of BGP UPDATE messages transmitted
-+ on this connection. This object should be
-+ initialized to zero (0) when the connection is
-+ established."
-+ ::= { bgpPeerEntry 11 }
-+
-+ bgpPeerInTotalMessages OBJECT-TYPE
-+ SYNTAX Counter32
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "The total number of messages received from the
-+ remote peer on this connection. This object
-+ should be initialized to zero when the
-+ connection is established."
-+ ::= { bgpPeerEntry 12 }
-+
-+ bgpPeerOutTotalMessages OBJECT-TYPE
-+ SYNTAX Counter32
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "The total number of messages transmitted to
-+ the remote peer on this connection. This object
-+ should be initialized to zero when the
-+ connection is established."
-+ ::= { bgpPeerEntry 13 }
-+
-+ bgpPeerLastError OBJECT-TYPE
-+ SYNTAX OCTET STRING (SIZE (2))
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "The last error code and subcode seen by this
-+ peer on this connection. If no error has
-+ occurred, this field is zero. Otherwise, the
-+ first byte of this two byte OCTET STRING
-+ contains the error code, and the second byte
-+ contains the subcode."
-+ ::= { bgpPeerEntry 14 }
-+
-+ bgpPeerFsmEstablishedTransitions OBJECT-TYPE
-+ SYNTAX Counter32
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "The total number of times the BGP FSM
-+ transitioned into the established state."
-+ ::= { bgpPeerEntry 15 }
-+
-+ bgpPeerFsmEstablishedTime OBJECT-TYPE
-+ SYNTAX Gauge32
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "This timer indicates how long (in seconds) this
-+ peer has been in the Established state or how long
-+ since this peer was last in the Established state.
-+ It is set to zero when a new peer is configured or
-+ the router is booted."
-+ ::= { bgpPeerEntry 16 }
-+
-+ bgpPeerConnectRetryInterval OBJECT-TYPE
-+ SYNTAX INTEGER (1..65535)
-+ MAX-ACCESS read-write
-+ STATUS current
-+ DESCRIPTION
-+ "Time interval in seconds for the ConnectRetry
-+ timer. The suggested value for this timer is
-+ 120 seconds."
-+ ::= { bgpPeerEntry 17 }
-+
-+ bgpPeerHoldTime OBJECT-TYPE
-+ SYNTAX INTEGER ( 0 | 3..65535 )
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "Time interval in seconds for the Hold Timer
-+ established with the peer. The value of this
-+ object is calculated by this BGP speaker by
-+ using the smaller of the value in
-+ bgpPeerHoldTimeConfigured and the Hold Time
-+ received in the OPEN message. This value
-+ must be at lease three seconds if it is not
-+ zero (0) in which case the Hold Timer has
-+ not been established with the peer, or, the
-+ value of bgpPeerHoldTimeConfigured is zero (0)."
-+ ::= { bgpPeerEntry 18 }
-+
-+ bgpPeerKeepAlive OBJECT-TYPE
-+ SYNTAX INTEGER ( 0 | 1..21845 )
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "Time interval in seconds for the KeepAlive
-+ timer established with the peer. The value of
-+ this object is calculated by this BGP speaker
-+ such that, when compared with bgpPeerHoldTime,
-+ it has the same proportion as what
-+ bgpPeerKeepAliveConfigured has when compared
-+ with bgpPeerHoldTimeConfigured. If the value
-+ of this object is zero (0), it indicates that
-+ the KeepAlive timer has not been established
-+ with the peer, or, the value of
-+ bgpPeerKeepAliveConfigured is zero (0)."
-+ ::= { bgpPeerEntry 19 }
-+
-+ bgpPeerHoldTimeConfigured OBJECT-TYPE
-+ SYNTAX INTEGER ( 0 | 3..65535 )
-+ MAX-ACCESS read-write
-+ STATUS current
-+ DESCRIPTION
-+ "Time interval in seconds for the Hold Time
-+ configured for this BGP speaker with this peer.
-+ This value is placed in an OPEN message sent to
-+ this peer by this BGP speaker, and is compared
-+ with the Hold Time field in an OPEN message
-+ received from the peer when determining the Hold
-+ Time (bgpPeerHoldTime) with the peer. This value
-+ must not be less than three seconds if it is not
-+ zero (0) in which case the Hold Time is NOT to be
-+ established with the peer. The suggested value for
-+ this timer is 90 seconds."
-+ ::= { bgpPeerEntry 20 }
-+
-+ bgpPeerKeepAliveConfigured OBJECT-TYPE
-+ SYNTAX INTEGER ( 0 | 1..21845 )
-+ MAX-ACCESS read-write
-+ STATUS current
-+ DESCRIPTION
-+ "Time interval in seconds for the KeepAlive timer
-+ configured for this BGP speaker with this peer.
-+ The value of this object will only determine the
-+ KEEPALIVE messages' frequency relative to the value
-+ specified in bgpPeerHoldTimeConfigured; the actual
-+ time interval for the KEEPALIVE messages is
-+ indicated by bgpPeerKeepAlive. A reasonable
-+ maximum value for this timer would be configured to
-+ be one third of that of bgpPeerHoldTimeConfigured.
-+ If the value of this object is zero (0), no
-+ periodical KEEPALIVE messages are sent to the peer
-+ after the BGP connection has been established. The
-+ suggested value for this timer is 30 seconds."
-+ ::= { bgpPeerEntry 21 }
-+
-+ bgpPeerMinASOriginationInterval OBJECT-TYPE
-+ SYNTAX INTEGER (1..65535)
-+ MAX-ACCESS read-write
-+ STATUS current
-+ DESCRIPTION
-+ "Time interval in seconds for the
-+ MinASOriginationInterval timer.
-+ The suggested value for this timer is 15 seconds."
-+ ::= { bgpPeerEntry 22 }
-+
-+ bgpPeerMinRouteAdvertisementInterval OBJECT-TYPE
-+ SYNTAX INTEGER (1..65535)
-+ MAX-ACCESS read-write
-+ STATUS current
-+ DESCRIPTION
-+ "Time interval in seconds for the
-+ MinRouteAdvertisementInterval timer.
-+ The suggested value for this timer is 30 seconds."
-+ ::= { bgpPeerEntry 23 }
-+
-+ bgpPeerInUpdateElapsedTime OBJECT-TYPE
-+ SYNTAX Gauge32
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "Elapsed time in seconds since the last BGP
-+ UPDATE message was received from the peer.
-+ Each time bgpPeerInUpdates is incremented,
-+ the value of this object is set to zero (0)."
-+ ::= { bgpPeerEntry 24 }
-+
-+
-+
-+ bgpIdentifier OBJECT-TYPE
-+ SYNTAX IpAddress
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "The BGP Identifier of local system."
-+ ::= { bgp 4 }
-+
-+
-+
-+ -- Received Path Attribute Table. This table contains,
-+ -- one entry per path to a network, path attributes
-+ -- received from all peers running BGP version 3 or less.
-+ -- This table is obsolete, having been replaced in
-+ -- functionality with the bgp4PathAttrTable.
-+
-+ bgpRcvdPathAttrTable OBJECT-TYPE
-+ SYNTAX SEQUENCE OF BgpPathAttrEntry
-+ MAX-ACCESS not-accessible
-+ STATUS obsolete
-+ DESCRIPTION
-+ "The BGP Received Path Attribute Table contains
-+ information about paths to destination networks
-+ received from all peers running BGP version 3 or
-+ less."
-+ ::= { bgp 5 }
-+
-+ bgpPathAttrEntry OBJECT-TYPE
-+ SYNTAX BgpPathAttrEntry
-+ MAX-ACCESS not-accessible
-+ STATUS obsolete
-+ DESCRIPTION
-+ "Information about a path to a network."
-+ INDEX { bgpPathAttrDestNetwork,
-+ bgpPathAttrPeer }
-+ ::= { bgpRcvdPathAttrTable 1 }
-+
-+ BgpPathAttrEntry ::= SEQUENCE {
-+ bgpPathAttrPeer
-+ IpAddress,
-+ bgpPathAttrDestNetwork
-+ IpAddress,
-+ bgpPathAttrOrigin
-+ INTEGER,
-+ bgpPathAttrASPath
-+ OCTET STRING,
-+ bgpPathAttrNextHop
-+ IpAddress,
-+ bgpPathAttrInterASMetric
-+ Integer32
-+ }
-+
-+ bgpPathAttrPeer OBJECT-TYPE
-+ SYNTAX IpAddress
-+ MAX-ACCESS read-only
-+ STATUS obsolete
-+ DESCRIPTION
-+ "The IP address of the peer where the path
-+ information was learned."
-+ ::= { bgpPathAttrEntry 1 }
-+
-+ bgpPathAttrDestNetwork OBJECT-TYPE
-+ SYNTAX IpAddress
-+ MAX-ACCESS read-only
-+ STATUS obsolete
-+ DESCRIPTION
-+ "The address of the destination network."
-+ ::= { bgpPathAttrEntry 2 }
-+
-+ bgpPathAttrOrigin OBJECT-TYPE
-+ SYNTAX INTEGER {
-+ igp(1),-- networks are interior
-+ egp(2),-- networks learned via EGP
-+ incomplete(3) -- undetermined
-+ }
-+ MAX-ACCESS read-only
-+ STATUS obsolete
-+ DESCRIPTION
-+ "The ultimate origin of the path information."
-+ ::= { bgpPathAttrEntry 3 }
-+
-+ bgpPathAttrASPath OBJECT-TYPE
-+ SYNTAX OCTET STRING (SIZE (2..255))
-+ MAX-ACCESS read-only
-+ STATUS obsolete
-+ DESCRIPTION
-+ "The set of ASs that must be traversed to reach
-+ the network. This object is probably best
-+ represented as SEQUENCE OF INTEGER. For SMI
-+ compatibility, though, it is represented as
-+ OCTET STRING. Each AS is represented as a pair
-+ of octets according to the following algorithm:
-+
-+ first-byte-of-pair = ASNumber / 256;
-+ second-byte-of-pair = ASNumber & 255;"
-+ ::= { bgpPathAttrEntry 4 }
-+
-+ bgpPathAttrNextHop OBJECT-TYPE
-+ SYNTAX IpAddress
-+ MAX-ACCESS read-only
-+ STATUS obsolete
-+ DESCRIPTION
-+ "The address of the border router that should
-+ be used for the destination network."
-+ ::= { bgpPathAttrEntry 5 }
-+
-+ bgpPathAttrInterASMetric OBJECT-TYPE
-+ SYNTAX Integer32
-+ MAX-ACCESS read-only
-+ STATUS obsolete
-+ DESCRIPTION
-+ "The optional inter-AS metric. If this
-+ attribute has not been provided for this route,
-+ the value for this object is 0."
-+ ::= { bgpPathAttrEntry 6 }
-+
-+
-+
-+ -- BGP-4 Received Path Attribute Table. This table contains,
-+ -- one entry per path to a network, path attributes
-+ -- received from all peers running BGP-4.
-+
-+ bgp4PathAttrTable OBJECT-TYPE
-+ SYNTAX SEQUENCE OF Bgp4PathAttrEntry
-+ MAX-ACCESS not-accessible
-+ STATUS current
-+ DESCRIPTION
-+ "The BGP-4 Received Path Attribute Table contains
-+ information about paths to destination networks
-+ received from all BGP4 peers."
-+ ::= { bgp 6 }
-+
-+ bgp4PathAttrEntry OBJECT-TYPE
-+ SYNTAX Bgp4PathAttrEntry
-+ MAX-ACCESS not-accessible
-+ STATUS current
-+ DESCRIPTION
-+ "Information about a path to a network."
-+ INDEX { bgp4PathAttrIpAddrPrefix,
-+ bgp4PathAttrIpAddrPrefixLen,
-+ bgp4PathAttrPeer }
-+ ::= { bgp4PathAttrTable 1 }
-+
-+ Bgp4PathAttrEntry ::= SEQUENCE {
-+ bgp4PathAttrPeer
-+ IpAddress,
-+ bgp4PathAttrIpAddrPrefixLen
-+ INTEGER,
-+ bgp4PathAttrIpAddrPrefix
-+ IpAddress,
-+ bgp4PathAttrOrigin
-+ INTEGER,
-+ bgp4PathAttrASPathSegment
-+ OCTET STRING,
-+ bgp4PathAttrNextHop
-+ IpAddress,
-+ bgp4PathAttrMultiExitDisc
-+ INTEGER,
-+ bgp4PathAttrLocalPref
-+ INTEGER,
-+ bgp4PathAttrAtomicAggregate
-+ INTEGER,
-+ bgp4PathAttrAggregatorAS
-+ INTEGER,
-+ bgp4PathAttrAggregatorAddr
-+ IpAddress,
-+ bgp4PathAttrCalcLocalPref
-+ INTEGER,
-+ bgp4PathAttrBest
-+ INTEGER,
-+ bgp4PathAttrUnknown
-+ OCTET STRING
-+ }
-+
-+ bgp4PathAttrPeer OBJECT-TYPE
-+ SYNTAX IpAddress
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "The IP address of the peer where the path
-+ information was learned."
-+ ::= { bgp4PathAttrEntry 1 }
-+ bgp4PathAttrIpAddrPrefixLen OBJECT-TYPE
-+ SYNTAX INTEGER (0..32)
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "Length in bits of the IP address prefix in the
-+ Network Layer Reachability Information field."
-+ ::= { bgp4PathAttrEntry 2 }
-+
-+ bgp4PathAttrIpAddrPrefix OBJECT-TYPE
-+ SYNTAX IpAddress
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "An IP address prefix in the Network Layer
-+ Reachability Information field. This object
-+ is an IP address containing the prefix with
-+ length specified by bgp4PathAttrIpAddrPrefixLen.
-+ Any bits beyond the length specified by
-+ bgp4PathAttrIpAddrPrefixLen are zeroed."
-+ ::= { bgp4PathAttrEntry 3 }
-+
-+ bgp4PathAttrOrigin OBJECT-TYPE
-+ SYNTAX INTEGER {
-+ igp(1),-- networks are interior
-+ egp(2),-- networks learned via EGP
-+ incomplete(3) -- undetermined
-+ }
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "The ultimate origin of the path information."
-+ ::= { bgp4PathAttrEntry 4 }
-+
-+ bgp4PathAttrASPathSegment OBJECT-TYPE
-+ SYNTAX OCTET STRING (SIZE (2..255))
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "The sequence of AS path segments. Each AS
-+ path segment is represented by a triple
-+ <type, length, value>.
-+
-+ The type is a 1-octet field which has two
-+ possible values:
-+ 1 AS_SET: unordered set of ASs a
-+ route in the UPDATE message
-+ has traversed
-+ 2 AS_SEQUENCE: ordered set of ASs
-+ a route in the UPDATE message
-+ has traversed.
-+
-+ The length is a 1-octet field containing the
-+ number of ASs in the value field.
-+
-+ The value field contains one or more AS
-+ numbers, each AS is represented in the octet
-+ string as a pair of octets according to the
-+ following algorithm:
-+
-+ first-byte-of-pair = ASNumber / 256;
-+ second-byte-of-pair = ASNumber & 255;"
-+ ::= { bgp4PathAttrEntry 5 }
-+
-+ bgp4PathAttrNextHop OBJECT-TYPE
-+ SYNTAX IpAddress
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "The address of the border router that should
-+ be used for the destination network."
-+ ::= { bgp4PathAttrEntry 6 }
-+
-+ bgp4PathAttrMultiExitDisc OBJECT-TYPE
-+ SYNTAX INTEGER (-1..2147483647)
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "This metric is used to discriminate between
-+ multiple exit points to an adjacent autonomous
-+ system. A value of -1 indicates the absence of
-+ this attribute."
-+ ::= { bgp4PathAttrEntry 7 }
-+
-+ bgp4PathAttrLocalPref OBJECT-TYPE
-+ SYNTAX INTEGER (-1..2147483647)
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "The originating BGP4 speaker's degree of
-+ preference for an advertised route. A value of
-+ -1 indicates the absence of this attribute."
-+ ::= { bgp4PathAttrEntry 8 }
-+
-+ bgp4PathAttrAtomicAggregate OBJECT-TYPE
-+ SYNTAX INTEGER {
-+ lessSpecificRrouteNotSelected(1),
-+ lessSpecificRouteSelected(2)
-+ }
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "Whether or not a system has selected
-+ a less specific route without selecting a
-+ more specific route."
-+ ::= { bgp4PathAttrEntry 9 }
-+
-+ bgp4PathAttrAggregatorAS OBJECT-TYPE
-+ SYNTAX INTEGER (0..65535)
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "The AS number of the last BGP4 speaker that
-+ performed route aggregation. A value of zero (0)
-+ indicates the absence of this attribute."
-+ ::= { bgp4PathAttrEntry 10 }
-+
-+ bgp4PathAttrAggregatorAddr OBJECT-TYPE
-+ SYNTAX IpAddress
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "The IP address of the last BGP4 speaker that
-+ performed route aggregation. A value of
-+ 0.0.0.0 indicates the absence of this attribute."
-+ ::= { bgp4PathAttrEntry 11 }
-+
-+ bgp4PathAttrCalcLocalPref OBJECT-TYPE
-+ SYNTAX INTEGER (-1..2147483647)
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "The degree of preference calculated by the
-+ receiving BGP4 speaker for an advertised route.
-+ A value of -1 indicates the absence of this
-+ attribute."
-+ ::= { bgp4PathAttrEntry 12 }
-+
-+ bgp4PathAttrBest OBJECT-TYPE
-+ SYNTAX INTEGER {
-+ false(1),-- not chosen as best route
-+ true(2) -- chosen as best route
-+ }
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "An indication of whether or not this route
-+ was chosen as the best BGP4 route."
-+ ::= { bgp4PathAttrEntry 13 }
-+
-+ bgp4PathAttrUnknown OBJECT-TYPE
-+ SYNTAX OCTET STRING (SIZE(0..255))
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "One or more path attributes not understood
-+ by this BGP4 speaker. Size zero (0) indicates
-+ the absence of such attribute(s). Octets
-+ beyond the maximum size, if any, are not
-+ recorded by this object."
-+ ::= { bgp4PathAttrEntry 14 }
-+
-+
-+ -- Traps.
-+
-+ -- note that in RFC 1657, bgpTraps was incorrectly
-+ -- assigned a value of { bgp 7 }, and each of the
-+ -- traps had the bgpPeerRemoteAddr object inappropriately
-+ -- removed from their OBJECTS clause. The following
-+ -- definitions restore the semantics of the traps as
-+ -- they were initially defined in RFC 1269.
-+
-+ -- { bgp 7 } is unused
-+
-+ bgpTraps OBJECT IDENTIFIER ::= { bgp 0 }
-+
-+ bgpEstablished NOTIFICATION-TYPE
-+ OBJECTS { bgpPeerRemoteAddr,
-+ bgpPeerLastError,
-+ bgpPeerState }
-+ STATUS current
-+ DESCRIPTION
-+ "The BGP Established event is generated when
-+ the BGP FSM enters the ESTABLISHED state."
-+ ::= { bgpTraps 1 }
-+
-+ bgpBackwardTransition NOTIFICATION-TYPE
-+ OBJECTS { bgpPeerRemoteAddr,
-+ bgpPeerLastError,
-+ bgpPeerState }
-+ STATUS current
-+ DESCRIPTION
-+ "The BGPBackwardTransition Event is generated
-+ when the BGP FSM moves from a higher numbered
-+ state to a lower numbered state."
-+ ::= { bgpTraps 2 }
-+
-+ -- conformance information
-+
-+ bgpMIBConformance OBJECT IDENTIFIER ::= { bgp 8 }
-+ bgpMIBCompliances OBJECT IDENTIFIER ::= { bgpMIBConformance 1 }
-+ bgpMIBGroups OBJECT IDENTIFIER ::= { bgpMIBConformance 2 }
-+
-+ -- compliance statements
-+
-+ bgpMIBCompliance MODULE-COMPLIANCE
-+ STATUS current
-+ DESCRIPTION
-+ "The compliance statement for entities which
-+ implement the BGP4 mib."
-+ MODULE -- this module
-+ MANDATORY-GROUPS { bgp4MIBGlobalsGroup,
-+ bgp4MIBPeerGroup,
-+ bgp4MIBPathAttrGroup,
-+ bgp4MIBNotificationGroup }
-+ ::= { bgpMIBCompliances 1 }
-+
-+ -- units of conformance
-+
-+ bgp4MIBGlobalsGroup OBJECT-GROUP
-+ OBJECTS { bgpVersion,
-+ bgpLocalAs,
-+ bgpIdentifier }
-+ STATUS current
-+ DESCRIPTION
-+ "A collection of objects providing information
-+ on global BGP state."
-+ ::= { bgpMIBGroups 1 }
-+
-+ bgp4MIBPeerGroup OBJECT-GROUP
-+ OBJECTS { bgpPeerIdentifier,
-+ bgpPeerState,
-+ bgpPeerAdminStatus,
-+ bgpPeerNegotiatedVersion,
-+ bgpPeerLocalAddr,
-+ bgpPeerLocalPort,
-+ bgpPeerRemoteAddr,
-+ bgpPeerRemotePort,
-+ bgpPeerRemoteAs,
-+ bgpPeerInUpdates,
-+ bgpPeerOutUpdates,
-+ bgpPeerInTotalMessages,
-+ bgpPeerOutTotalMessages,
-+ bgpPeerLastError,
-+ bgpPeerFsmEstablishedTransitions,
-+ bgpPeerFsmEstablishedTime,
-+ bgpPeerConnectRetryInterval,
-+ bgpPeerHoldTime,
-+ bgpPeerKeepAlive,
-+ bgpPeerHoldTimeConfigured,
-+ bgpPeerKeepAliveConfigured,
-+ bgpPeerMinASOriginationInterval,
-+ bgpPeerMinRouteAdvertisementInterval,
-+ bgpPeerInUpdateElapsedTime }
-+ STATUS current
-+ DESCRIPTION
-+ "A collection of objects for managing
-+ BGP peers."
-+ ::= { bgpMIBGroups 2 }
-+
-+ bgp4MIBRcvdPathAttrGroup OBJECT-GROUP
-+ OBJECTS { bgpPathAttrPeer,
-+ bgpPathAttrDestNetwork,
-+ bgpPathAttrOrigin,
-+ bgpPathAttrASPath,
-+ bgpPathAttrNextHop,
-+ bgpPathAttrInterASMetric }
-+ STATUS obsolete
-+ DESCRIPTION
-+ "A collection of objects for managing BGP
-+ path entries.
-+
-+ This conformance group is obsolete,
-+ replaced by bgp4MIBPathAttrGroup."
-+ ::= { bgpMIBGroups 3 }
-+
-+ bgp4MIBPathAttrGroup OBJECT-GROUP
-+ OBJECTS { bgp4PathAttrPeer,
-+ bgp4PathAttrIpAddrPrefixLen,
-+ bgp4PathAttrIpAddrPrefix,
-+ bgp4PathAttrOrigin,
-+ bgp4PathAttrASPathSegment,
-+ bgp4PathAttrNextHop,
-+ bgp4PathAttrMultiExitDisc,
-+ bgp4PathAttrLocalPref,
-+ bgp4PathAttrAtomicAggregate,
-+ bgp4PathAttrAggregatorAS,
-+ bgp4PathAttrAggregatorAddr,
-+ bgp4PathAttrCalcLocalPref,
-+ bgp4PathAttrBest,
-+ bgp4PathAttrUnknown }
-+ STATUS current
-+ DESCRIPTION
-+ "A collection of objects for managing
-+ BGP path entries."
-+ ::= { bgpMIBGroups 4 }
-+
-+ bgp4MIBNotificationGroup NOTIFICATION-GROUP
-+ NOTIFICATIONS { bgpEstablished,
-+ bgpBackwardTransition }
-+ STATUS current
-+ DESCRIPTION
-+ "A collection of notifications for signaling
-+ changes in BGP peer relationships."
-+ ::= { bgpMIBGroups 5 }
-+
-+ END
-diff -ruN net-snmp-5.4.1.orig/mibs/BRIDGE-MIB.txt net-snmp-5.4.1/mibs/BRIDGE-MIB.txt
---- net-snmp-5.4.1.orig/mibs/BRIDGE-MIB.txt 1970-01-01 01:00:00.000000000 +0100
-+++ net-snmp-5.4.1/mibs/BRIDGE-MIB.txt 2007-09-20 16:30:52.000000000 +0200
-@@ -0,0 +1,1075 @@
-+BRIDGE-MIB DEFINITIONS ::= BEGIN
-+
-+IMPORTS
-+ Counter, TimeTicks
-+ FROM RFC1155-SMI
-+ mib-2
-+ FROM RFC1213-MIB
-+ OBJECT-TYPE
-+ FROM RFC-1212
-+ TRAP-TYPE
-+ FROM RFC-1215;
-+
-+-- All representations of MAC addresses in this MIB Module
-+-- use, as a textual convention (i.e. this convention does
-+-- not affect their encoding), the data type:
-+MacAddress ::= OCTET STRING (SIZE (6)) -- a 6 octet address
-+ -- in the
-+ -- "canonical"
-+ -- order
-+-- defined by IEEE 802.1a, i.e., as if it were transmitted
-+-- least significant bit first, even though 802.5 (in
-+-- contrast to other n802.x protocols) requires MAC
-+-- addresses to be transmitted most significant bit first.
-+--
-+-- 16-bit addresses, if needed, are represented by setting
-+-- their upper 4 octets to all 0's, i.e., AAFF would be
-+-- represented as 00000000AAFF.
-+
-+-- Similarly, all representations of Bridge-Id in this MIB
-+-- Module use, as a textual convention (i.e. this
-+-- convention does not affect their encoding), the data
-+-- type:
-+BridgeId ::= OCTET STRING (SIZE (8)) -- the
-+ -- Bridge-Identifier
-+ -- as used in the
-+ -- Spanning Tree
-+-- Protocol to uniquely identify a bridge. Its first two
-+-- octets (in network byte order) contain a priority
-+-- value and its last 6 octets contain the MAC address
-+-- used to refer to a bridge in a unique fashion
-+-- (typically, the numerically smallest MAC address
-+-- of all ports on the bridge).
-+
-+-- Several objects in this MIB module represent values of
-+-- timers used by the Spanning Tree Protocol. In this
-+-- MIB, these timers have values in units of hundreths of
-+-- a second (i.e. 1/100 secs).
-+-- These timers, when stored in a Spanning Tree Protocol's
-+-- BPDU, are in units of 1/256 seconds. Note, however,
-+-- that 802.1D-1990 specifies a settable granularity of
-+-- no more than 1 second for these timers. To avoid
-+-- ambiguity, a data type is defined here as a textual
-+-- convention and all representation of these timers
-+-- in this MIB module are defined using this data type. An
-+-- algorithm is also defined for converting between the
-+-- different units, to ensure a timer's value is not
-+-- distorted by multiple conversions.
-+-- The data type is:
-+
-+Timeout ::= INTEGER -- a STP timer in units of 1/100 seconds
-+
-+-- To convert a Timeout value into a value in units of
-+-- 1/256 seconds, the following algorithm should be used:
-+--
-+-- b = floor( (n * 256) / 100)
-+--
-+-- where:
-+-- floor = quotient [ignore remainder]
-+-- n is the value in 1/100 second units
-+-- b is the value in 1/256 second units
-+--
-+-- To convert the value from 1/256 second units back to
-+-- 1/100 seconds, the following algorithm should be used:
-+--
-+-- n = ceiling( (b * 100) / 256)
-+--
-+-- where:
-+-- ceiling = quotient [if remainder is 0], or
-+-- quotient + 1 [if remainder is non-zero]
-+-- n is the value in 1/100 second units
-+-- b is the value in 1/256 second units
-+--
-+-- Note: it is important that the arithmetic operations are
-+-- done in the order specified (i.e., multiply first, divide
-+-- second).
-+
-+ dot1dBridge OBJECT IDENTIFIER ::= { mib-2 17 }
-+
-+-- groups in the Bridge MIB
-+
-+dot1dBase OBJECT IDENTIFIER ::= { dot1dBridge 1 }
-+
-+dot1dStp OBJECT IDENTIFIER ::= { dot1dBridge 2 }
-+
-+dot1dSr OBJECT IDENTIFIER ::= { dot1dBridge 3 }
-+-- separately documented
-+
-+dot1dTp OBJECT IDENTIFIER ::= { dot1dBridge 4 }
-+
-+dot1dStatic OBJECT IDENTIFIER ::= { dot1dBridge 5 }
-+
-+-- the dot1dBase group
-+
-+-- Implementation of the dot1dBase group is mandatory for all
-+-- bridges.
-+
-+dot1dBaseBridgeAddress OBJECT-TYPE
-+ SYNTAX MacAddress
-+ ACCESS read-only
-+ STATUS mandatory
-+ DESCRIPTION
-+ "The MAC address used by this bridge when it must
-+ be referred to in a unique fashion. It is
-+ recommended that this be the numerically smallest
-+ MAC address of all ports that belong to this
-+ bridge. However it is only required to be unique.
-+ When concatenated with dot1dStpPriority a unique
-+ BridgeIdentifier is formed which is used in the
-+ Spanning Tree Protocol."
-+ REFERENCE
-+ "IEEE 802.1D-1990: Sections 6.4.1.1.3 and 3.12.5"
-+ ::= { dot1dBase 1 }
-+
-+dot1dBaseNumPorts OBJECT-TYPE
-+ SYNTAX INTEGER
-+ ACCESS read-only
-+ STATUS mandatory
-+ DESCRIPTION
-+ "The number of ports controlled by this bridging
-+ entity."
-+ REFERENCE
-+ "IEEE 802.1D-1990: Section 6.4.1.1.3"
-+ ::= { dot1dBase 2 }
-+
-+dot1dBaseType OBJECT-TYPE
-+ SYNTAX INTEGER {
-+ unknown(1),
-+ transparent-only(2),
-+ sourceroute-only(3),
-+ srt(4)
-+ }
-+ ACCESS read-only
-+ STATUS mandatory
-+ DESCRIPTION
-+ "Indicates what type of bridging this bridge can
-+ perform. If a bridge is actually performing a
-+ certain type of bridging this will be indicated by
-+ entries in the port table for the given type."
-+ ::= { dot1dBase 3 }
-+
-+-- The Generic Bridge Port Table
-+
-+dot1dBasePortTable OBJECT-TYPE
-+ SYNTAX SEQUENCE OF Dot1dBasePortEntry
-+ ACCESS not-accessible
-+ STATUS mandatory
-+ DESCRIPTION
-+ "A table that contains generic information about
-+ every port that is associated with this bridge.
-+ Transparent, source-route, and srt ports are
-+ included."
-+ ::= { dot1dBase 4 }
-+
-+dot1dBasePortEntry OBJECT-TYPE
-+ SYNTAX Dot1dBasePortEntry
-+ ACCESS not-accessible
-+ STATUS mandatory
-+ DESCRIPTION
-+ "A list of information for each port of the
-+ bridge."
-+ REFERENCE
-+ "IEEE 802.1D-1990: Section 6.4.2, 6.6.1"
-+ INDEX { dot1dBasePort }
-+ ::= { dot1dBasePortTable 1 }
-+
-+Dot1dBasePortEntry ::=
-+ SEQUENCE {
-+ dot1dBasePort
-+ INTEGER,
-+ dot1dBasePortIfIndex
-+ INTEGER,
-+ dot1dBasePortCircuit
-+
-+ OBJECT IDENTIFIER,
-+ dot1dBasePortDelayExceededDiscards
-+ Counter,
-+ dot1dBasePortMtuExceededDiscards
-+ Counter
-+ }
-+
-+dot1dBasePort OBJECT-TYPE
-+ SYNTAX INTEGER (1..65535)
-+ ACCESS read-only
-+ STATUS mandatory
-+ DESCRIPTION
-+ "The port number of the port for which this entry
-+ contains bridge management information."
-+ ::= { dot1dBasePortEntry 1 }
-+
-+dot1dBasePortIfIndex OBJECT-TYPE
-+ SYNTAX INTEGER
-+ ACCESS read-only
-+ STATUS mandatory
-+ DESCRIPTION
-+ "The value of the instance of the ifIndex object,
-+ defined in MIB-II, for the interface corresponding
-+ to this port."
-+ ::= { dot1dBasePortEntry 2 }
-+
-+dot1dBasePortCircuit OBJECT-TYPE
-+ SYNTAX OBJECT IDENTIFIER
-+ ACCESS read-only
-+ STATUS mandatory
-+ DESCRIPTION
-+ "For a port which (potentially) has the same value
-+ of dot1dBasePortIfIndex as another port on the
-+ same bridge, this object contains the name of an
-+ object instance unique to this port. For example,
-+ in the case where multiple ports correspond one-
-+ to-one with multiple X.25 virtual circuits, this
-+ value might identify an (e.g., the first) object
-+ instance associated with the X.25 virtual circuit
-+ corresponding to this port.
-+
-+ For a port which has a unique value of
-+ dot1dBasePortIfIndex, this object can have the
-+ value { 0 0 }."
-+ ::= { dot1dBasePortEntry 3 }
-+
-+dot1dBasePortDelayExceededDiscards OBJECT-TYPE
-+ SYNTAX Counter
-+
-+ ACCESS read-only
-+ STATUS mandatory
-+ DESCRIPTION
-+ "The number of frames discarded by this port due
-+ to excessive transit delay through the bridge. It
-+ is incremented by both transparent and source
-+ route bridges."
-+ REFERENCE
-+ "IEEE 802.1D-1990: Section 6.6.1.1.3"
-+ ::= { dot1dBasePortEntry 4 }
-+
-+dot1dBasePortMtuExceededDiscards OBJECT-TYPE
-+ SYNTAX Counter
-+ ACCESS read-only
-+ STATUS mandatory
-+ DESCRIPTION
-+ "The number of frames discarded by this port due
-+ to an excessive size. It is incremented by both
-+ transparent and source route bridges."
-+ REFERENCE
-+ "IEEE 802.1D-1990: Section 6.6.1.1.3"
-+ ::= { dot1dBasePortEntry 5 }
-+
-+-- the dot1dStp group
-+
-+-- Implementation of the dot1dStp group is optional. It is
-+-- implemented by those bridges that support the Spanning Tree
-+-- Protocol.
-+
-+dot1dStpProtocolSpecification OBJECT-TYPE
-+ SYNTAX INTEGER {
-+ unknown(1),
-+ decLb100(2),
-+ ieee8021d(3)
-+ }
-+ ACCESS read-only
-+ STATUS mandatory
-+ DESCRIPTION
-+ "An indication of what version of the Spanning
-+ Tree Protocol is being run. The value
-+ 'decLb100(2)' indicates the DEC LANbridge 100
-+ Spanning Tree protocol. IEEE 802.1d
-+ implementations will return 'ieee8021d(3)'. If
-+ future versions of the IEEE Spanning Tree Protocol
-+ are released that are incompatible with the
-+ current version a new value will be defined."
-+
-+ ::= { dot1dStp 1 }
-+
-+dot1dStpPriority OBJECT-TYPE
-+ SYNTAX INTEGER (0..65535)
-+ ACCESS read-write
-+ STATUS mandatory
-+ DESCRIPTION
-+ "The value of the write-able portion of the Bridge
-+ ID, i.e., the first two octets of the (8 octet
-+ long) Bridge ID. The other (last) 6 octets of the
-+ Bridge ID are given by the value of
-+ dot1dBaseBridgeAddress."
-+ REFERENCE
-+ "IEEE 802.1D-1990: Section 4.5.3.7"
-+ ::= { dot1dStp 2 }
-+
-+dot1dStpTimeSinceTopologyChange OBJECT-TYPE
-+ SYNTAX TimeTicks
-+ ACCESS read-only
-+ STATUS mandatory
-+ DESCRIPTION
-+ "The time (in hundredths of a second) since the
-+ last time a topology change was detected by the
-+ bridge entity."
-+ REFERENCE
-+ "IEEE 802.1D-1990: Section 6.8.1.1.3"
-+ ::= { dot1dStp 3 }
-+
-+dot1dStpTopChanges OBJECT-TYPE
-+ SYNTAX Counter
-+ ACCESS read-only
-+ STATUS mandatory
-+ DESCRIPTION
-+ "The total number of topology changes detected by
-+ this bridge since the management entity was last
-+ reset or initialized."
-+ REFERENCE
-+ "IEEE 802.1D-1990: Section 6.8.1.1.3"
-+ ::= { dot1dStp 4 }
-+
-+dot1dStpDesignatedRoot OBJECT-TYPE
-+ SYNTAX BridgeId
-+ ACCESS read-only
-+ STATUS mandatory
-+ DESCRIPTION
-+ "The bridge identifier of the root of the spanning
-+ tree as determined by the Spanning Tree Protocol
-+ as executed by this node. This value is used as
-+
-+ the Root Identifier parameter in all Configuration
-+ Bridge PDUs originated by this node."
-+ REFERENCE
-+ "IEEE 802.1D-1990: Section 4.5.3.1"
-+ ::= { dot1dStp 5 }
-+
-+dot1dStpRootCost OBJECT-TYPE
-+ SYNTAX INTEGER
-+ ACCESS read-only
-+ STATUS mandatory
-+ DESCRIPTION
-+ "The cost of the path to the root as seen from
-+ this bridge."
-+ REFERENCE
-+ "IEEE 802.1D-1990: Section 4.5.3.2"
-+ ::= { dot1dStp 6 }
-+
-+dot1dStpRootPort OBJECT-TYPE
-+ SYNTAX INTEGER
-+ ACCESS read-only
-+ STATUS mandatory
-+ DESCRIPTION
-+ "The port number of the port which offers the
-+ lowest cost path from this bridge to the root
-+ bridge."
-+ REFERENCE
-+ "IEEE 802.1D-1990: Section 4.5.3.3"
-+ ::= { dot1dStp 7 }
-+
-+dot1dStpMaxAge OBJECT-TYPE
-+ SYNTAX Timeout
-+ ACCESS read-only
-+ STATUS mandatory
-+ DESCRIPTION
-+ "The maximum age of Spanning Tree Protocol
-+ information learned from the network on any port
-+ before it is discarded, in units of hundredths of
-+ a second. This is the actual value that this
-+ bridge is currently using."
-+ REFERENCE
-+ "IEEE 802.1D-1990: Section 4.5.3.4"
-+ ::= { dot1dStp 8 }
-+
-+dot1dStpHelloTime OBJECT-TYPE
-+ SYNTAX Timeout
-+ ACCESS read-only
-+ STATUS mandatory
-+ DESCRIPTION
-+
-+ "The amount of time between the transmission of
-+ Configuration bridge PDUs by this node on any port
-+ when it is the root of the spanning tree or trying
-+ to become so, in units of hundredths of a second.
-+ This is the actual value that this bridge is
-+ currently using."
-+ REFERENCE
-+ "IEEE 802.1D-1990: Section 4.5.3.5"
-+ ::= { dot1dStp 9 }
-+
-+dot1dStpHoldTime OBJECT-TYPE
-+ SYNTAX INTEGER
-+ ACCESS read-only
-+ STATUS mandatory
-+ DESCRIPTION
-+ "This time value determines the interval length
-+ during which no more than two Configuration bridge
-+ PDUs shall be transmitted by this node, in units
-+ of hundredths of a second."
-+ REFERENCE
-+ "IEEE 802.1D-1990: Section 4.5.3.14"
-+ ::= { dot1dStp 10 }
-+
-+dot1dStpForwardDelay OBJECT-TYPE
-+ SYNTAX Timeout
-+ ACCESS read-only
-+ STATUS mandatory
-+ DESCRIPTION
-+ "This time value, measured in units of hundredths
-+ of a second, controls how fast a port changes its
-+ spanning state when moving towards the Forwarding
-+ state. The value determines how long the port
-+ stays in each of the Listening and Learning
-+ states, which precede the Forwarding state. This
-+ value is also used, when a topology change has
-+ been detected and is underway, to age all dynamic
-+ entries in the Forwarding Database. [Note that
-+ this value is the one that this bridge is
-+ currently using, in contrast to
-+ dot1dStpBridgeForwardDelay which is the value that
-+ this bridge and all others would start using
-+ if/when this bridge were to become the root.]"
-+ REFERENCE
-+ "IEEE 802.1D-1990: Section 4.5.3.6"
-+ ::= { dot1dStp 11 }
-+
-+dot1dStpBridgeMaxAge OBJECT-TYPE
-+ SYNTAX Timeout (600..4000)
-+
-+ ACCESS read-write
-+ STATUS mandatory
-+ DESCRIPTION
-+ "The value that all bridges use for MaxAge when
-+ this bridge is acting as the root. Note that
-+ 802.1D-1990 specifies that the range for this
-+ parameter is related to the value of
-+ dot1dStpBridgeHelloTime. The granularity of this
-+ timer is specified by 802.1D-1990 to be 1 second.
-+ An agent may return a badValue error if a set is
-+ attempted to a value which is not a whole number
-+ of seconds."
-+ REFERENCE
-+ "IEEE 802.1D-1990: Section 4.5.3.8"
-+ ::= { dot1dStp 12 }
-+
-+dot1dStpBridgeHelloTime OBJECT-TYPE
-+ SYNTAX Timeout (100..1000)
-+ ACCESS read-write
-+ STATUS mandatory
-+ DESCRIPTION
-+ "The value that all bridges use for HelloTime when
-+ this bridge is acting as the root. The
-+ granularity of this timer is specified by 802.1D-
-+ 1990 to be 1 second. An agent may return a
-+ badValue error if a set is attempted to a value
-+ which is not a whole number of seconds."
-+ REFERENCE
-+ "IEEE 802.1D-1990: Section 4.5.3.9"
-+ ::= { dot1dStp 13 }
-+
-+dot1dStpBridgeForwardDelay OBJECT-TYPE
-+ SYNTAX Timeout (400..3000)
-+ ACCESS read-write
-+ STATUS mandatory
-+ DESCRIPTION
-+ "The value that all bridges use for ForwardDelay
-+ when this bridge is acting as the root. Note that
-+ 802.1D-1990 specifies that the range for this
-+ parameter is related to the value of
-+ dot1dStpBridgeMaxAge. The granularity of this
-+ timer is specified by 802.1D-1990 to be 1 second.
-+ An agent may return a badValue error if a set is
-+ attempted to a value which is not a whole number
-+ of seconds."
-+ REFERENCE
-+ "IEEE 802.1D-1990: Section 4.5.3.10"
-+ ::= { dot1dStp 14 }
-+
-+-- The Spanning Tree Port Table
-+
-+dot1dStpPortTable OBJECT-TYPE
-+ SYNTAX SEQUENCE OF Dot1dStpPortEntry
-+ ACCESS not-accessible
-+ STATUS mandatory
-+ DESCRIPTION
-+ "A table that contains port-specific information
-+ for the Spanning Tree Protocol."
-+ ::= { dot1dStp 15 }
-+
-+dot1dStpPortEntry OBJECT-TYPE
-+ SYNTAX Dot1dStpPortEntry
-+ ACCESS not-accessible
-+ STATUS mandatory
-+ DESCRIPTION
-+ "A list of information maintained by every port
-+ about the Spanning Tree Protocol state for that
-+ port."
-+ INDEX { dot1dStpPort }
-+ ::= { dot1dStpPortTable 1 }
-+
-+Dot1dStpPortEntry ::=
-+ SEQUENCE {
-+ dot1dStpPort
-+ INTEGER,
-+ dot1dStpPortPriority
-+ INTEGER,
-+ dot1dStpPortState
-+ INTEGER,
-+ dot1dStpPortEnable
-+ INTEGER,
-+ dot1dStpPortPathCost
-+ INTEGER,
-+ dot1dStpPortDesignatedRoot
-+ BridgeId,
-+ dot1dStpPortDesignatedCost
-+ INTEGER,
-+ dot1dStpPortDesignatedBridge
-+ BridgeId,
-+ dot1dStpPortDesignatedPort
-+ OCTET STRING,
-+ dot1dStpPortForwardTransitions
-+ Counter
-+ }
-+
-+dot1dStpPort OBJECT-TYPE
-+ SYNTAX INTEGER (1..65535)
-+
-+ ACCESS read-only
-+ STATUS mandatory
-+ DESCRIPTION
-+ "The port number of the port for which this entry
-+ contains Spanning Tree Protocol management
-+ information."
-+ REFERENCE
-+ "IEEE 802.1D-1990: Section 6.8.2.1.2"
-+ ::= { dot1dStpPortEntry 1 }
-+
-+dot1dStpPortPriority OBJECT-TYPE
-+ SYNTAX INTEGER (0..255)
-+ ACCESS read-write
-+ STATUS mandatory
-+ DESCRIPTION
-+ "The value of the priority field which is
-+ contained in the first (in network byte order)
-+ octet of the (2 octet long) Port ID. The other
-+ octet of the Port ID is given by the value of
-+ dot1dStpPort."
-+ REFERENCE
-+ "IEEE 802.1D-1990: Section 4.5.5.1"
-+ ::= { dot1dStpPortEntry 2 }
-+
-+dot1dStpPortState OBJECT-TYPE
-+ SYNTAX INTEGER {
-+ disabled(1),
-+ blocking(2),
-+ listening(3),
-+ learning(4),
-+ forwarding(5),
-+ broken(6)
-+ }
-+ ACCESS read-only
-+ STATUS mandatory
-+ DESCRIPTION
-+ "The port's current state as defined by
-+ application of the Spanning Tree Protocol. This
-+ state controls what action a port takes on
-+ reception of a frame. If the bridge has detected
-+ a port that is malfunctioning it will place that
-+ port into the broken(6) state. For ports which
-+ are disabled (see dot1dStpPortEnable), this object
-+ will have a value of disabled(1)."
-+ REFERENCE
-+ "IEEE 802.1D-1990: Section 4.5.5.2"
-+ ::= { dot1dStpPortEntry 3 }
-+
-+dot1dStpPortEnable OBJECT-TYPE
-+ SYNTAX INTEGER {
-+ enabled(1),
-+ disabled(2)
-+ }
-+ ACCESS read-write
-+ STATUS mandatory
-+ DESCRIPTION
-+ "The enabled/disabled status of the port."
-+ REFERENCE
-+ "IEEE 802.1D-1990: Section 4.5.5.2"
-+ ::= { dot1dStpPortEntry 4 }
-+
-+dot1dStpPortPathCost OBJECT-TYPE
-+ SYNTAX INTEGER (1..65535)
-+ ACCESS read-write
-+ STATUS mandatory
-+ DESCRIPTION
-+ "The contribution of this port to the path cost of
-+ paths towards the spanning tree root which include
-+ this port. 802.1D-1990 recommends that the
-+ default value of this parameter be in inverse
-+ proportion to the speed of the attached LAN."
-+ REFERENCE
-+ "IEEE 802.1D-1990: Section 4.5.5.3"
-+ ::= { dot1dStpPortEntry 5 }
-+
-+dot1dStpPortDesignatedRoot OBJECT-TYPE
-+ SYNTAX BridgeId
-+ ACCESS read-only
-+ STATUS mandatory
-+ DESCRIPTION
-+ "The unique Bridge Identifier of the Bridge
-+ recorded as the Root in the Configuration BPDUs
-+ transmitted by the Designated Bridge for the
-+ segment to which the port is attached."
-+ REFERENCE
-+ "IEEE 802.1D-1990: Section 4.5.5.4"
-+ ::= { dot1dStpPortEntry 6 }
-+
-+dot1dStpPortDesignatedCost OBJECT-TYPE
-+ SYNTAX INTEGER
-+ ACCESS read-only
-+ STATUS mandatory
-+ DESCRIPTION
-+ "The path cost of the Designated Port of the
-+ segment connected to this port. This value is
-+ compared to the Root Path Cost field in received
-+
-+ bridge PDUs."
-+ REFERENCE
-+ "IEEE 802.1D-1990: Section 4.5.5.5"
-+ ::= { dot1dStpPortEntry 7 }
-+
-+dot1dStpPortDesignatedBridge OBJECT-TYPE
-+ SYNTAX BridgeId
-+ ACCESS read-only
-+ STATUS mandatory
-+ DESCRIPTION
-+ "The Bridge Identifier of the bridge which this
-+ port considers to be the Designated Bridge for
-+ this port's segment."
-+ REFERENCE
-+ "IEEE 802.1D-1990: Section 4.5.5.6"
-+ ::= { dot1dStpPortEntry 8 }
-+
-+dot1dStpPortDesignatedPort OBJECT-TYPE
-+ SYNTAX OCTET STRING (SIZE (2))
-+ ACCESS read-only
-+ STATUS mandatory
-+ DESCRIPTION
-+ "The Port Identifier of the port on the Designated
-+ Bridge for this port's segment."
-+ REFERENCE
-+ "IEEE 802.1D-1990: Section 4.5.5.7"
-+ ::= { dot1dStpPortEntry 9 }
-+
-+dot1dStpPortForwardTransitions OBJECT-TYPE
-+ SYNTAX Counter
-+ ACCESS read-only
-+ STATUS mandatory
-+ DESCRIPTION
-+ "The number of times this port has transitioned
-+ from the Learning state to the Forwarding state."
-+ ::= { dot1dStpPortEntry 10 }
-+
-+-- the dot1dTp group
-+
-+-- Implementation of the dot1dTp group is optional. It is
-+-- implemented by those bridges that support the transparent
-+-- bridging mode. A transparent or SRT bridge will implement
-+-- this group.
-+
-+dot1dTpLearnedEntryDiscards OBJECT-TYPE
-+ SYNTAX Counter
-+
-+ ACCESS read-only
-+ STATUS mandatory
-+ DESCRIPTION
-+ "The total number of Forwarding Database entries,
-+ which have been or would have been learnt, but
-+ have been discarded due to a lack of space to
-+ store them in the Forwarding Database. If this
-+ counter is increasing, it indicates that the
-+ Forwarding Database is regularly becoming full (a
-+ condition which has unpleasant performance effects
-+ on the subnetwork). If this counter has a
-+ significant value but is not presently increasing,
-+ it indicates that the problem has been occurring
-+ but is not persistent."
-+ REFERENCE
-+ "IEEE 802.1D-1990: Section 6.7.1.1.3"
-+ ::= { dot1dTp 1 }
-+
-+dot1dTpAgingTime OBJECT-TYPE
-+ SYNTAX INTEGER (10..1000000)
-+ ACCESS read-write
-+ STATUS mandatory
-+ DESCRIPTION
-+ "The timeout period in seconds for aging out
-+ dynamically learned forwarding information.
-+ 802.1D-1990 recommends a default of 300 seconds."
-+ REFERENCE
-+ "IEEE 802.1D-1990: Section 6.7.1.1.3"
-+ ::= { dot1dTp 2 }
-+
-+-- The Forwarding Database for Transparent Bridges
-+
-+dot1dTpFdbTable OBJECT-TYPE
-+ SYNTAX SEQUENCE OF Dot1dTpFdbEntry
-+ ACCESS not-accessible
-+ STATUS mandatory
-+ DESCRIPTION
-+ "A table that contains information about unicast
-+ entries for which the bridge has forwarding and/or
-+ filtering information. This information is used
-+ by the transparent bridging function in
-+ determining how to propagate a received frame."
-+ ::= { dot1dTp 3 }
-+
-+dot1dTpFdbEntry OBJECT-TYPE
-+ SYNTAX Dot1dTpFdbEntry
-+ ACCESS not-accessible
-+ STATUS mandatory
-+ DESCRIPTION
-+ "Information about a specific unicast MAC address
-+ for which the bridge has some forwarding and/or
-+ filtering information."
-+ INDEX { dot1dTpFdbAddress }
-+ ::= { dot1dTpFdbTable 1 }
-+
-+Dot1dTpFdbEntry ::=
-+ SEQUENCE {
-+ dot1dTpFdbAddress
-+ MacAddress,
-+ dot1dTpFdbPort
-+ INTEGER,
-+ dot1dTpFdbStatus
-+ INTEGER
-+ }
-+
-+dot1dTpFdbAddress OBJECT-TYPE
-+ SYNTAX MacAddress
-+ ACCESS read-only
-+ STATUS mandatory
-+ DESCRIPTION
-+ "A unicast MAC address for which the bridge has
-+ forwarding and/or filtering information."
-+ REFERENCE
-+ "IEEE 802.1D-1990: Section 3.9.1, 3.9.2"
-+ ::= { dot1dTpFdbEntry 1 }
-+
-+dot1dTpFdbPort OBJECT-TYPE
-+ SYNTAX INTEGER
-+ ACCESS read-only
-+ STATUS mandatory
-+ DESCRIPTION
-+ "Either the value '0', or the port number of the
-+ port on which a frame having a source address
-+ equal to the value of the corresponding instance
-+ of dot1dTpFdbAddress has been seen. A value of
-+ '0' indicates that the port number has not been
-+ learned but that the bridge does have some
-+ forwarding/filtering information about this
-+ address (e.g. in the dot1dStaticTable).
-+ Implementors are encouraged to assign the port
-+ value to this object whenever it is learned even
-+ for addresses for which the corresponding value of
-+ dot1dTpFdbStatus is not learned(3)."
-+ ::= { dot1dTpFdbEntry 2 }
-+
-+dot1dTpFdbStatus OBJECT-TYPE
-+ SYNTAX INTEGER {
-+ other(1),
-+ invalid(2),
-+ learned(3),
-+ self(4),
-+ mgmt(5)
-+ }
-+ ACCESS read-only
-+ STATUS mandatory
-+ DESCRIPTION
-+ "The status of this entry. The meanings of the
-+ values are:
-+ other(1) : none of the following. This would
-+ include the case where some other
-+ MIB object (not the corresponding
-+ instance of dot1dTpFdbPort, nor an
-+ entry in the dot1dStaticTable) is
-+ being used to determine if and how
-+ frames addressed to the value of
-+ the corresponding instance of
-+ dot1dTpFdbAddress are being
-+ forwarded.
-+ invalid(2) : this entry is not longer valid
-+ (e.g., it was learned but has since
-+ aged-out), but has not yet been
-+ flushed from the table.
-+ learned(3) : the value of the corresponding
-+ instance of dot1dTpFdbPort was
-+ learned, and is being used.
-+ self(4) : the value of the corresponding
-+ instance of dot1dTpFdbAddress
-+ represents one of the bridge's
-+ addresses. The corresponding
-+ instance of dot1dTpFdbPort
-+ indicates which of the bridge's
-+ ports has this address.
-+ mgmt(5) : the value of the corresponding
-+ instance of dot1dTpFdbAddress is
-+ also the value of an existing
-+ instance of dot1dStaticAddress."
-+ ::= { dot1dTpFdbEntry 3 }
-+
-+-- Port Table for Transparent Bridges
-+
-+dot1dTpPortTable OBJECT-TYPE
-+ SYNTAX SEQUENCE OF Dot1dTpPortEntry
-+ ACCESS not-accessible
-+ STATUS mandatory
-+ DESCRIPTION
-+ "A table that contains information about every
-+ port that is associated with this transparent
-+ bridge."
-+ ::= { dot1dTp 4 }
-+
-+dot1dTpPortEntry OBJECT-TYPE
-+ SYNTAX Dot1dTpPortEntry
-+ ACCESS not-accessible
-+ STATUS mandatory
-+ DESCRIPTION
-+ "A list of information for each port of a
-+ transparent bridge."
-+ INDEX { dot1dTpPort }
-+ ::= { dot1dTpPortTable 1 }
-+
-+Dot1dTpPortEntry ::=
-+ SEQUENCE {
-+ dot1dTpPort
-+ INTEGER,
-+ dot1dTpPortMaxInfo
-+ INTEGER,
-+ dot1dTpPortInFrames
-+ Counter,
-+ dot1dTpPortOutFrames
-+ Counter,
-+ dot1dTpPortInDiscards
-+ Counter
-+ }
-+
-+dot1dTpPort OBJECT-TYPE
-+ SYNTAX INTEGER (1..65535)
-+ ACCESS read-only
-+ STATUS mandatory
-+ DESCRIPTION
-+ "The port number of the port for which this entry
-+ contains Transparent bridging management
-+ information."
-+ ::= { dot1dTpPortEntry 1 }
-+
-+-- It would be nice if we could use ifMtu as the size of the
-+-- largest INFO field, but we can't because ifMtu is defined
-+-- to be the size that the (inter-)network layer can use which
-+-- can differ from the MAC layer (especially if several layers
-+-- of encapsulation are used).
-+
-+dot1dTpPortMaxInfo OBJECT-TYPE
-+ SYNTAX INTEGER
-+ ACCESS read-only
-+ STATUS mandatory
-+ DESCRIPTION
-+ "The maximum size of the INFO (non-MAC) field that
-+ this port will receive or transmit."
-+ ::= { dot1dTpPortEntry 2 }
-+
-+dot1dTpPortInFrames OBJECT-TYPE
-+ SYNTAX Counter
-+ ACCESS read-only
-+ STATUS mandatory
-+ DESCRIPTION
-+ "The number of frames that have been received by
-+ this port from its segment. Note that a frame
-+ received on the interface corresponding to this
-+ port is only counted by this object if and only if
-+ it is for a protocol being processed by the local
-+ bridging function, including bridge management
-+ frames."
-+ REFERENCE
-+ "IEEE 802.1D-1990: Section 6.6.1.1.3"
-+ ::= { dot1dTpPortEntry 3 }
-+
-+dot1dTpPortOutFrames OBJECT-TYPE
-+ SYNTAX Counter
-+ ACCESS read-only
-+ STATUS mandatory
-+ DESCRIPTION
-+ "The number of frames that have been transmitted
-+ by this port to its segment. Note that a frame
-+ transmitted on the interface corresponding to this
-+ port is only counted by this object if and only if
-+ it is for a protocol being processed by the local
-+ bridging function, including bridge management
-+ frames."
-+ REFERENCE
-+ "IEEE 802.1D-1990: Section 6.6.1.1.3"
-+ ::= { dot1dTpPortEntry 4 }
-+
-+dot1dTpPortInDiscards OBJECT-TYPE
-+ SYNTAX Counter
-+ ACCESS read-only
-+ STATUS mandatory
-+ DESCRIPTION
-+ "Count of valid frames received which were
-+ discarded (i.e., filtered) by the Forwarding
-+ Process."
-+ REFERENCE
-+ "IEEE 802.1D-1990: Section 6.6.1.1.3"
-+ ::= { dot1dTpPortEntry 5 }
-+-- The Static (Destination-Address Filtering) Database
-+
-+-- Implementation of this group is optional.
-+
-+dot1dStaticTable OBJECT-TYPE
-+ SYNTAX SEQUENCE OF Dot1dStaticEntry
-+ ACCESS not-accessible
-+ STATUS mandatory
-+ DESCRIPTION
-+ "A table containing filtering information
-+ configured into the bridge by (local or network)
-+ management specifying the set of ports to which
-+ frames received from specific ports and containing
-+ specific destination addresses are allowed to be
-+ forwarded. The value of zero in this table as the
-+ port number from which frames with a specific
-+ destination address are received, is used to
-+ specify all ports for which there is no specific
-+ entry in this table for that particular
-+ destination address. Entries are valid for
-+ unicast and for group/broadcast addresses."
-+ REFERENCE
-+ "IEEE 802.1D-1990: Section 6.7.2"
-+ ::= { dot1dStatic 1 }
-+
-+dot1dStaticEntry OBJECT-TYPE
-+ SYNTAX Dot1dStaticEntry
-+ ACCESS not-accessible
-+ STATUS mandatory
-+ DESCRIPTION
-+ "Filtering information configured into the bridge
-+ by (local or network) management specifying the
-+ set of ports to which frames received from a
-+ specific port and containing a specific
-+ destination address are allowed to be forwarded."
-+ REFERENCE
-+ "IEEE 802.1D-1990: Section 6.7.2"
-+ INDEX { dot1dStaticAddress, dot1dStaticReceivePort }
-+ ::= { dot1dStaticTable 1 }
-+
-+Dot1dStaticEntry ::=
-+ SEQUENCE {
-+ dot1dStaticAddress
-+ MacAddress,
-+ dot1dStaticReceivePort
-+ INTEGER,
-+ dot1dStaticAllowedToGoTo
-+ OCTET STRING,
-+ dot1dStaticStatus
-+ INTEGER
-+ }
-+
-+dot1dStaticAddress OBJECT-TYPE
-+ SYNTAX MacAddress
-+ ACCESS read-write
-+ STATUS mandatory
-+ DESCRIPTION
-+ "The destination MAC address in a frame to which
-+ this entry's filtering information applies. This
-+ object can take the value of a unicast address, a
-+ group address or the broadcast address."
-+ REFERENCE
-+ "IEEE 802.1D-1990: Section 3.9.1, 3.9.2"
-+ ::= { dot1dStaticEntry 1 }
-+
-+dot1dStaticReceivePort OBJECT-TYPE
-+ SYNTAX INTEGER
-+ ACCESS read-write
-+ STATUS mandatory
-+ DESCRIPTION
-+ "Either the value '0', or the port number of the
-+ port from which a frame must be received in order
-+ for this entry's filtering information to apply.
-+ A value of zero indicates that this entry applies
-+ on all ports of the bridge for which there is no
-+ other applicable entry."
-+ ::= { dot1dStaticEntry 2 }
-+
-+dot1dStaticAllowedToGoTo OBJECT-TYPE
-+ SYNTAX OCTET STRING
-+ ACCESS read-write
-+ STATUS mandatory
-+ DESCRIPTION
-+ "The set of ports to which frames received from a
-+ specific port and destined for a specific MAC
-+
-+ address, are allowed to be forwarded. Each octet
-+ within the value of this object specifies a set of
-+ eight ports, with the first octet specifying ports
-+ 1 through 8, the second octet specifying ports 9
-+ through 16, etc. Within each octet, the most
-+ significant bit represents the lowest numbered
-+ port, and the least significant bit represents the
-+ highest numbered port. Thus, each port of the
-+ bridge is represented by a single bit within the
-+ value of this object. If that bit has a value of
-+ '1' then that port is included in the set of
-+ ports; the port is not included if its bit has a
-+ value of '0'. (Note that the setting of the bit
-+ corresponding to the port from which a frame is
-+ received is irrelevant.) The default value of
-+ this object is a string of ones of appropriate
-+ length."
-+ ::= { dot1dStaticEntry 3 }
-+
-+dot1dStaticStatus OBJECT-TYPE
-+ SYNTAX INTEGER {
-+ other(1),
-+ invalid(2),
-+ permanent(3),
-+ deleteOnReset(4),
-+ deleteOnTimeout(5)
-+ }
-+ ACCESS read-write
-+ STATUS mandatory
-+ DESCRIPTION
-+ "This object indicates the status of this entry.
-+ The default value is permanent(3).
-+ other(1) - this entry is currently in use but
-+ the conditions under which it will
-+ remain so are different from each of the
-+ following values.
-+ invalid(2) - writing this value to the object
-+ removes the corresponding entry.
-+ permanent(3) - this entry is currently in use
-+ and will remain so after the next reset
-+ of the bridge.
-+ deleteOnReset(4) - this entry is currently in
-+ use and will remain so until the next
-+ reset of the bridge.
-+ deleteOnTimeout(5) - this entry is currently
-+ in use and will remain so until it is
-+ aged out."
-+
-+ ::= { dot1dStaticEntry 4 }
-+
-+-- Traps for use by Bridges
-+
-+-- Traps for the Spanning Tree Protocol
-+
-+newRoot TRAP-TYPE
-+ ENTERPRISE dot1dBridge
-+ DESCRIPTION
-+ "The newRoot trap indicates that the sending agent
-+ has become the new root of the Spanning Tree; the
-+ trap is sent by a bridge soon after its election
-+ as the new root, e.g., upon expiration of the
-+ Topology Change Timer immediately subsequent to
-+ its election. Implementation of this trap is
-+ optional."
-+ ::= 1
-+
-+topologyChange TRAP-TYPE
-+ ENTERPRISE dot1dBridge
-+ DESCRIPTION
-+ "A topologyChange trap is sent by a bridge when
-+ any of its configured ports transitions from the
-+ Learning state to the Forwarding state, or from
-+ the Forwarding state to the Blocking state. The
-+ trap is not sent if a newRoot trap is sent for the
-+ same transition. Implementation of this trap is
-+ optional."
-+ ::= 2
-+
-+END
diff -ruN net-snmp-5.4.1.orig/mibs/GNOME-SMI.txt net-snmp-5.4.1/mibs/GNOME-SMI.txt
--- net-snmp-5.4.1.orig/mibs/GNOME-SMI.txt 1970-01-01 01:00:00.000000000 +0100
+++ net-snmp-5.4.1/mibs/GNOME-SMI.txt 2007-09-20 16:33:55.000000000 +0200
@@ -2102,4167 +90,3 @@
+-- more to come if necessary.
+
+END
-diff -ruN net-snmp-5.4.1.orig/mibs/OSPF-MIB.txt net-snmp-5.4.1/mibs/OSPF-MIB.txt
---- net-snmp-5.4.1.orig/mibs/OSPF-MIB.txt 1970-01-01 01:00:00.000000000 +0100
-+++ net-snmp-5.4.1/mibs/OSPF-MIB.txt 2007-09-20 16:30:52.000000000 +0200
-@@ -0,0 +1,2723 @@
-+OSPF-MIB DEFINITIONS ::= BEGIN
-+
-+ IMPORTS
-+ MODULE-IDENTITY, OBJECT-TYPE, Counter32, Gauge32,
-+ Integer32, IpAddress
-+ FROM SNMPv2-SMI
-+ TEXTUAL-CONVENTION, TruthValue, RowStatus
-+ FROM SNMPv2-TC
-+ MODULE-COMPLIANCE, OBJECT-GROUP FROM SNMPv2-CONF
-+ mib-2 FROM RFC1213-MIB;
-+
-+-- This MIB module uses the extended OBJECT-TYPE macro as
-+-- defined in [9].
-+
-+ospf MODULE-IDENTITY
-+ LAST-UPDATED "9501201225Z" -- Fri Jan 20 12:25:50 PST 1995
-+ ORGANIZATION "IETF OSPF Working Group"
-+ CONTACT-INFO
-+ " Fred Baker
-+ Postal: Cisco Systems
-+ 519 Lado Drive
-+ Santa Barbara, California 93111
-+ Tel: +1 805 681 0115
-+ E-Mail: fred at cisco.com
-+
-+ Rob Coltun
-+ Postal: RainbowBridge Communications
-+ Tel: (301) 340-9416
-+ E-Mail: rcoltun at rainbow-bridge.com"
-+ DESCRIPTION
-+ "The MIB module to describe the OSPF Version 2
-+ Protocol"
-+ ::= { mib-2 14 }
-+
-+-- The Area ID, in OSPF, has the same format as an IP Address,
-+-- but has the function of defining a summarization point for
-+-- Link State Advertisements
-+
-+AreaID ::= TEXTUAL-CONVENTION
-+ STATUS current
-+ DESCRIPTION
-+ "An OSPF Area Identifier."
-+ SYNTAX IpAddress
-+
-+
-+-- The Router ID, in OSPF, has the same format as an IP Address,
-+-- but identifies the router independent of its IP Address.
-+
-+RouterID ::= TEXTUAL-CONVENTION
-+ STATUS current
-+ DESCRIPTION
-+ "A OSPF Router Identifier."
-+ SYNTAX IpAddress
-+
-+
-+-- The OSPF Metric is defined as an unsigned value in the range
-+
-+Metric ::= TEXTUAL-CONVENTION
-+ STATUS current
-+ DESCRIPTION
-+ "The OSPF Internal Metric."
-+ SYNTAX Integer32 (0..'FFFF'h)
-+
-+BigMetric ::= TEXTUAL-CONVENTION
-+ STATUS current
-+ DESCRIPTION
-+ "The OSPF External Metric."
-+ SYNTAX Integer32 (0..'FFFFFF'h)
-+
-+-- Status Values
-+
-+Status ::= TEXTUAL-CONVENTION
-+ STATUS current
-+ DESCRIPTION
-+ "The status of an interface: 'enabled' indicates that
-+ it is willing to communicate with other OSPF Routers,
-+ while 'disabled' indicates that it is not."
-+ SYNTAX INTEGER { enabled (1), disabled (2) }
-+
-+-- Time Durations measured in seconds
-+
-+PositiveInteger ::= TEXTUAL-CONVENTION
-+ STATUS current
-+ DESCRIPTION
-+ "A positive integer. Values in excess are precluded as
-+ unnecessary and prone to interoperability issues."
-+ SYNTAX Integer32 (0..'7FFFFFFF'h)
-+
-+HelloRange ::= TEXTUAL-CONVENTION
-+ STATUS current
-+ DESCRIPTION
-+ "The range of intervals on which hello messages are
-+ exchanged."
-+ SYNTAX Integer32 (1..'FFFF'h)
-+
-+UpToMaxAge ::= TEXTUAL-CONVENTION
-+ STATUS current
-+ DESCRIPTION
-+ "The values that one might find or configure for
-+ variables bounded by the maximum age of an LSA."
-+ SYNTAX Integer32 (0..3600)
-+
-+
-+-- The range of ifIndex
-+
-+InterfaceIndex ::= TEXTUAL-CONVENTION
-+ STATUS current
-+ DESCRIPTION
-+ "The range of ifIndex."
-+ SYNTAX Integer32
-+
-+
-+-- Potential Priorities for the Designated Router Election
-+
-+DesignatedRouterPriority ::= TEXTUAL-CONVENTION
-+ STATUS current
-+ DESCRIPTION
-+ "The values defined for the priority of a system for
-+ becoming the designated router."
-+ SYNTAX Integer32 (0..'FF'h)
-+
-+TOSType ::= TEXTUAL-CONVENTION
-+ STATUS current
-+ DESCRIPTION
-+ "Type of Service is defined as a mapping to the IP Type of
-+ Service Flags as defined in the IP Forwarding Table MIB
-+
-+ +-----+-----+-----+-----+-----+-----+-----+-----+
-+ | | | |
-+ | PRECEDENCE | TYPE OF SERVICE | 0 |
-+ | | | |
-+ +-----+-----+-----+-----+-----+-----+-----+-----+
-+
-+ IP TOS IP TOS
-+ Field Policy Field Policy
-+
-+ Contents Code Contents Code
-+ 0 0 0 0 ==> 0 0 0 0 1 ==> 2
-+ 0 0 1 0 ==> 4 0 0 1 1 ==> 6
-+ 0 1 0 0 ==> 8 0 1 0 1 ==> 10
-+ 0 1 1 0 ==> 12 0 1 1 1 ==> 14
-+ 1 0 0 0 ==> 16 1 0 0 1 ==> 18
-+ 1 0 1 0 ==> 20 1 0 1 1 ==> 22
-+ 1 1 0 0 ==> 24 1 1 0 1 ==> 26
-+ 1 1 1 0 ==> 28 1 1 1 1 ==> 30
-+
-+ The remaining values are left for future definition."
-+ SYNTAX Integer32 (0..30)
-+
-+
-+-- OSPF General Variables
-+
-+-- These parameters apply globally to the Router's
-+-- OSPF Process.
-+
-+ospfGeneralGroup OBJECT IDENTIFIER ::= { ospf 1 }
-+
-+
-+ ospfRouterId OBJECT-TYPE
-+ SYNTAX RouterID
-+ MAX-ACCESS read-write
-+ STATUS current
-+ DESCRIPTION
-+ "A 32-bit integer uniquely identifying the
-+ router in the Autonomous System.
-+
-+ By convention, to ensure uniqueness, this
-+ should default to the value of one of the
-+ router's IP interface addresses."
-+ REFERENCE
-+ "OSPF Version 2, C.1 Global parameters"
-+ ::= { ospfGeneralGroup 1 }
-+
-+
-+ ospfAdminStat OBJECT-TYPE
-+ SYNTAX Status
-+ MAX-ACCESS read-write
-+ STATUS current
-+ DESCRIPTION
-+ "The administrative status of OSPF in the
-+ router. The value 'enabled' denotes that the
-+ OSPF Process is active on at least one inter-
-+ face; 'disabled' disables it on all inter-
-+ faces."
-+ ::= { ospfGeneralGroup 2 }
-+
-+ ospfVersionNumber OBJECT-TYPE
-+ SYNTAX INTEGER { version2 (2) }
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "The current version number of the OSPF proto-
-+ col is 2."
-+ REFERENCE
-+ "OSPF Version 2, Title"
-+ ::= { ospfGeneralGroup 3 }
-+
-+
-+ ospfAreaBdrRtrStatus OBJECT-TYPE
-+ SYNTAX TruthValue
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "A flag to note whether this router is an area
-+ border router."
-+ REFERENCE
-+ "OSPF Version 2, Section 3 Splitting the AS into
-+ Areas"
-+ ::= { ospfGeneralGroup 4 }
-+
-+
-+ ospfASBdrRtrStatus OBJECT-TYPE
-+ SYNTAX TruthValue
-+ MAX-ACCESS read-write
-+ STATUS current
-+ DESCRIPTION
-+ "A flag to note whether this router is config-
-+ ured as an Autonomous System border router."
-+ REFERENCE
-+ "OSPF Version 2, Section 3.3 Classification of
-+ routers"
-+ ::= { ospfGeneralGroup 5 }
-+
-+ ospfExternLsaCount OBJECT-TYPE
-+ SYNTAX Gauge32
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "The number of external (LS type 5) link-state
-+ advertisements in the link-state database."
-+ REFERENCE
-+ "OSPF Version 2, Appendix A.4.5 AS external link
-+ advertisements"
-+ ::= { ospfGeneralGroup 6 }
-+
-+
-+ ospfExternLsaCksumSum OBJECT-TYPE
-+ SYNTAX Integer32
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "The 32-bit unsigned sum of the LS checksums of
-+ the external link-state advertisements con-
-+ tained in the link-state database. This sum
-+ can be used to determine if there has been a
-+ change in a router's link state database, and
-+ to compare the link-state database of two
-+ routers."
-+ ::= { ospfGeneralGroup 7 }
-+
-+
-+ ospfTOSSupport OBJECT-TYPE
-+ SYNTAX TruthValue
-+ MAX-ACCESS read-write
-+ STATUS current
-+ DESCRIPTION
-+ "The router's support for type-of-service rout-
-+ ing."
-+ REFERENCE
-+ "OSPF Version 2, Appendix F.1.2 Optional TOS
-+ support"
-+ ::= { ospfGeneralGroup 8 }
-+
-+ ospfOriginateNewLsas OBJECT-TYPE
-+ SYNTAX Counter32
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "The number of new link-state advertisements
-+ that have been originated. This number is in-
-+ cremented each time the router originates a new
-+ LSA."
-+ ::= { ospfGeneralGroup 9 }
-+
-+
-+ ospfRxNewLsas OBJECT-TYPE
-+ SYNTAX Counter32
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "The number of link-state advertisements re-
-+ ceived determined to be new instantiations.
-+ This number does not include newer instantia-
-+ tions of self-originated link-state advertise-
-+ ments."
-+ ::= { ospfGeneralGroup 10 }
-+
-+ ospfExtLsdbLimit OBJECT-TYPE
-+ SYNTAX Integer32 (-1..'7FFFFFFF'h)
-+ MAX-ACCESS read-write
-+ STATUS current
-+ DESCRIPTION
-+ "The maximum number of non-default AS-
-+ external-LSAs entries that can be stored in the
-+ link-state database. If the value is -1, then
-+ there is no limit.
-+
-+ When the number of non-default AS-external-LSAs
-+ in a router's link-state database reaches
-+ ospfExtLsdbLimit, the router enters Overflow-
-+ State. The router never holds more than
-+ ospfExtLsdbLimit non-default AS-external-LSAs
-+ in its database. OspfExtLsdbLimit MUST be set
-+ identically in all routers attached to the OSPF
-+ backbone and/or any regular OSPF area. (i.e.,
-+ OSPF stub areas and NSSAs are excluded)."
-+ DEFVAL { -1 }
-+ ::= { ospfGeneralGroup 11 }
-+
-+ ospfMulticastExtensions OBJECT-TYPE
-+ SYNTAX Integer32
-+ MAX-ACCESS read-write
-+ STATUS current
-+ DESCRIPTION
-+ "A Bit Mask indicating whether the router is
-+ forwarding IP multicast (Class D) datagrams
-+ based on the algorithms defined in the Multi-
-+ cast Extensions to OSPF.
-+
-+ Bit 0, if set, indicates that the router can
-+ forward IP multicast datagrams in the router's
-+ directly attached areas (called intra-area mul-
-+ ticast routing).
-+
-+ Bit 1, if set, indicates that the router can
-+ forward IP multicast datagrams between OSPF
-+ areas (called inter-area multicast routing).
-+
-+ Bit 2, if set, indicates that the router can
-+ forward IP multicast datagrams between Auto-
-+ nomous Systems (called inter-AS multicast rout-
-+ ing).
-+
-+ Only certain combinations of bit settings are
-+ allowed, namely: 0 (no multicast forwarding is
-+ enabled), 1 (intra-area multicasting only), 3
-+ (intra-area and inter-area multicasting), 5
-+ (intra-area and inter-AS multicasting) and 7
-+ (multicasting everywhere). By default, no mul-
-+ ticast forwarding is enabled."
-+ DEFVAL { 0 }
-+ ::= { ospfGeneralGroup 12 }
-+
-+ ospfExitOverflowInterval OBJECT-TYPE
-+ SYNTAX PositiveInteger
-+ MAX-ACCESS read-write
-+ STATUS current
-+ DESCRIPTION
-+ "The number of seconds that, after entering
-+ OverflowState, a router will attempt to leave
-+ OverflowState. This allows the router to again
-+ originate non-default AS-external-LSAs. When
-+ set to 0, the router will not leave Overflow-
-+ State until restarted."
-+ DEFVAL { 0 }
-+ ::= { ospfGeneralGroup 13 }
-+
-+
-+ ospfDemandExtensions OBJECT-TYPE
-+ SYNTAX TruthValue
-+ MAX-ACCESS read-write
-+ STATUS current
-+ DESCRIPTION
-+ "The router's support for demand routing."
-+ REFERENCE
-+ "OSPF Version 2, Appendix on Demand Routing"
-+ ::= { ospfGeneralGroup 14 }
-+
-+
-+-- The OSPF Area Data Structure contains information
-+-- regarding the various areas. The interfaces and
-+-- virtual links are configured as part of these areas.
-+-- Area 0.0.0.0, by definition, is the Backbone Area
-+
-+
-+ ospfAreaTable OBJECT-TYPE
-+ SYNTAX SEQUENCE OF OspfAreaEntry
-+ MAX-ACCESS not-accessible
-+ STATUS current
-+ DESCRIPTION
-+ "Information describing the configured parame-
-+ ters and cumulative statistics of the router's
-+ attached areas."
-+ REFERENCE
-+ "OSPF Version 2, Section 6 The Area Data Struc-
-+ ture"
-+ ::= { ospf 2 }
-+
-+
-+ ospfAreaEntry OBJECT-TYPE
-+ SYNTAX OspfAreaEntry
-+ MAX-ACCESS not-accessible
-+ STATUS current
-+ DESCRIPTION
-+ "Information describing the configured parame-
-+ ters and cumulative statistics of one of the
-+ router's attached areas."
-+ INDEX { ospfAreaId }
-+ ::= { ospfAreaTable 1 }
-+
-+OspfAreaEntry ::=
-+ SEQUENCE {
-+ ospfAreaId
-+ AreaID,
-+ ospfAuthType
-+ Integer32,
-+ ospfImportAsExtern
-+ INTEGER,
-+ ospfSpfRuns
-+ Counter32,
-+ ospfAreaBdrRtrCount
-+ Gauge32,
-+ ospfAsBdrRtrCount
-+ Gauge32,
-+ ospfAreaLsaCount
-+ Gauge32,
-+ ospfAreaLsaCksumSum
-+ Integer32,
-+ ospfAreaSummary
-+ INTEGER,
-+ ospfAreaStatus
-+ RowStatus
-+ }
-+
-+ ospfAreaId OBJECT-TYPE
-+ SYNTAX AreaID
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "A 32-bit integer uniquely identifying an area.
-+ Area ID 0.0.0.0 is used for the OSPF backbone."
-+ REFERENCE
-+ "OSPF Version 2, Appendix C.2 Area parameters"
-+ ::= { ospfAreaEntry 1 }
-+
-+
-+ ospfAuthType OBJECT-TYPE
-+ SYNTAX Integer32
-+ -- none (0),
-+ -- simplePassword (1)
-+ -- md5 (2)
-+ -- reserved for specification by IANA (> 2)
-+ MAX-ACCESS read-create
-+ STATUS obsolete
-+ DESCRIPTION
-+ "The authentication type specified for an area.
-+ Additional authentication types may be assigned
-+ locally on a per Area basis."
-+ REFERENCE
-+ "OSPF Version 2, Appendix E Authentication"
-+ DEFVAL { 0 } -- no authentication, by default
-+ ::= { ospfAreaEntry 2 }
-+
-+ ospfImportAsExtern OBJECT-TYPE
-+ SYNTAX INTEGER {
-+ importExternal (1),
-+ importNoExternal (2),
-+ importNssa (3)
-+ }
-+ MAX-ACCESS read-create
-+ STATUS current
-+ DESCRIPTION
-+ "The area's support for importing AS external
-+ link- state advertisements."
-+ REFERENCE
-+ "OSPF Version 2, Appendix C.2 Area parameters"
-+ DEFVAL { importExternal }
-+ ::= { ospfAreaEntry 3 }
-+
-+
-+ ospfSpfRuns OBJECT-TYPE
-+ SYNTAX Counter32
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "The number of times that the intra-area route
-+ table has been calculated using this area's
-+ link-state database. This is typically done
-+ using Dijkstra's algorithm."
-+ ::= { ospfAreaEntry 4 }
-+
-+
-+ ospfAreaBdrRtrCount OBJECT-TYPE
-+ SYNTAX Gauge32
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "The total number of area border routers reach-
-+ able within this area. This is initially zero,
-+ and is calculated in each SPF Pass."
-+ ::= { ospfAreaEntry 5 }
-+
-+ ospfAsBdrRtrCount OBJECT-TYPE
-+ SYNTAX Gauge32
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "The total number of Autonomous System border
-+ routers reachable within this area. This is
-+ initially zero, and is calculated in each SPF
-+ Pass."
-+ ::= { ospfAreaEntry 6 }
-+
-+
-+ ospfAreaLsaCount OBJECT-TYPE
-+ SYNTAX Gauge32
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "The total number of link-state advertisements
-+ in this area's link-state database, excluding
-+ AS External LSA's."
-+ ::= { ospfAreaEntry 7 }
-+
-+
-+ ospfAreaLsaCksumSum OBJECT-TYPE
-+ SYNTAX Integer32
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "The 32-bit unsigned sum of the link-state ad-
-+ vertisements' LS checksums contained in this
-+ area's link-state database. This sum excludes
-+ external (LS type 5) link-state advertisements.
-+ The sum can be used to determine if there has
-+ been a change in a router's link state data-
-+ base, and to compare the link-state database of
-+ two routers."
-+ DEFVAL { 0 }
-+ ::= { ospfAreaEntry 8 }
-+
-+ ospfAreaSummary OBJECT-TYPE
-+ SYNTAX INTEGER {
-+ noAreaSummary (1),
-+ sendAreaSummary (2)
-+ }
-+ MAX-ACCESS read-create
-+ STATUS current
-+ DESCRIPTION
-+ "The variable ospfAreaSummary controls the im-
-+ port of summary LSAs into stub areas. It has
-+ no effect on other areas.
-+
-+ If it is noAreaSummary, the router will neither
-+ originate nor propagate summary LSAs into the
-+ stub area. It will rely entirely on its de-
-+ fault route.
-+
-+ If it is sendAreaSummary, the router will both
-+ summarize and propagate summary LSAs."
-+ DEFVAL { noAreaSummary }
-+ ::= { ospfAreaEntry 9 }
-+
-+
-+ ospfAreaStatus OBJECT-TYPE
-+ SYNTAX RowStatus
-+ MAX-ACCESS read-create
-+ STATUS current
-+ DESCRIPTION
-+ "This variable displays the status of the en-
-+ try. Setting it to 'invalid' has the effect of
-+ rendering it inoperative. The internal effect
-+ (row removal) is implementation dependent."
-+ ::= { ospfAreaEntry 10 }
-+
-+
-+-- OSPF Area Default Metric Table
-+
-+-- The OSPF Area Default Metric Table describes the metrics
-+-- that a default Area Border Router will advertise into a
-+-- Stub area.
-+
-+
-+ ospfStubAreaTable OBJECT-TYPE
-+ SYNTAX SEQUENCE OF OspfStubAreaEntry
-+ MAX-ACCESS not-accessible
-+ STATUS current
-+ DESCRIPTION
-+ "The set of metrics that will be advertised by
-+ a default Area Border Router into a stub area."
-+ REFERENCE
-+ "OSPF Version 2, Appendix C.2, Area Parameters"
-+ ::= { ospf 3 }
-+
-+
-+ ospfStubAreaEntry OBJECT-TYPE
-+ SYNTAX OspfStubAreaEntry
-+ MAX-ACCESS not-accessible
-+ STATUS current
-+ DESCRIPTION
-+ "The metric for a given Type of Service that
-+ will be advertised by a default Area Border
-+ Router into a stub area."
-+ REFERENCE
-+ "OSPF Version 2, Appendix C.2, Area Parameters"
-+ INDEX { ospfStubAreaId, ospfStubTOS }
-+ ::= { ospfStubAreaTable 1 }
-+
-+OspfStubAreaEntry ::=
-+ SEQUENCE {
-+ ospfStubAreaId
-+ AreaID,
-+ ospfStubTOS
-+ TOSType,
-+ ospfStubMetric
-+ BigMetric,
-+ ospfStubStatus
-+ RowStatus,
-+ ospfStubMetricType
-+ INTEGER
-+ }
-+
-+ ospfStubAreaId OBJECT-TYPE
-+ SYNTAX AreaID
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "The 32 bit identifier for the Stub Area. On
-+ creation, this can be derived from the in-
-+ stance."
-+ ::= { ospfStubAreaEntry 1 }
-+
-+
-+ ospfStubTOS OBJECT-TYPE
-+ SYNTAX TOSType
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "The Type of Service associated with the
-+ metric. On creation, this can be derived from
-+ the instance."
-+ ::= { ospfStubAreaEntry 2 }
-+
-+
-+ ospfStubMetric OBJECT-TYPE
-+ SYNTAX BigMetric
-+ MAX-ACCESS read-create
-+ STATUS current
-+ DESCRIPTION
-+ "The metric value applied at the indicated type
-+ of service. By default, this equals the least
-+ metric at the type of service among the inter-
-+ faces to other areas."
-+ ::= { ospfStubAreaEntry 3 }
-+
-+
-+ ospfStubStatus OBJECT-TYPE
-+ SYNTAX RowStatus
-+ MAX-ACCESS read-create
-+ STATUS current
-+ DESCRIPTION
-+ "This variable displays the status of the en-
-+ try. Setting it to 'invalid' has the effect of
-+ rendering it inoperative. The internal effect
-+ (row removal) is implementation dependent."
-+ ::= { ospfStubAreaEntry 4 }
-+
-+ ospfStubMetricType OBJECT-TYPE
-+ SYNTAX INTEGER {
-+ ospfMetric (1), -- OSPF Metric
-+ comparableCost (2), -- external type 1
-+ nonComparable (3) -- external type 2
-+ }
-+ MAX-ACCESS read-create
-+ STATUS current
-+ DESCRIPTION
-+ "This variable displays the type of metric ad-
-+ vertised as a default route."
-+ DEFVAL { ospfMetric }
-+ ::= { ospfStubAreaEntry 5 }
-+
-+-- OSPF Link State Database
-+
-+-- The Link State Database contains the Link State
-+-- Advertisements from throughout the areas that the
-+-- device is attached to.
-+
-+
-+ ospfLsdbTable OBJECT-TYPE
-+ SYNTAX SEQUENCE OF OspfLsdbEntry
-+ MAX-ACCESS not-accessible
-+ STATUS current
-+ DESCRIPTION
-+ "The OSPF Process's Link State Database."
-+ REFERENCE
-+ "OSPF Version 2, Section 12 Link State Adver-
-+ tisements"
-+ ::= { ospf 4 }
-+
-+
-+ ospfLsdbEntry OBJECT-TYPE
-+ SYNTAX OspfLsdbEntry
-+ MAX-ACCESS not-accessible
-+ STATUS current
-+ DESCRIPTION
-+ "A single Link State Advertisement."
-+ INDEX { ospfLsdbAreaId, ospfLsdbType,
-+ ospfLsdbLsid, ospfLsdbRouterId }
-+ ::= { ospfLsdbTable 1 }
-+
-+OspfLsdbEntry ::=
-+ SEQUENCE {
-+ ospfLsdbAreaId
-+ AreaID,
-+ ospfLsdbType
-+ INTEGER,
-+ ospfLsdbLsid
-+ IpAddress,
-+ ospfLsdbRouterId
-+ RouterID,
-+ ospfLsdbSequence
-+ Integer32,
-+ ospfLsdbAge
-+ Integer32,
-+ ospfLsdbChecksum
-+ Integer32,
-+ ospfLsdbAdvertisement
-+ OCTET STRING
-+ }
-+ ospfLsdbAreaId OBJECT-TYPE
-+ SYNTAX AreaID
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "The 32 bit identifier of the Area from which
-+ the LSA was received."
-+ REFERENCE
-+ "OSPF Version 2, Appendix C.2 Area parameters"
-+ ::= { ospfLsdbEntry 1 }
-+
-+-- External Link State Advertisements are permitted
-+-- for backward compatibility, but should be displayed in
-+-- the ospfExtLsdbTable rather than here.
-+
-+ ospfLsdbType OBJECT-TYPE
-+ SYNTAX INTEGER {
-+ routerLink (1),
-+ networkLink (2),
-+ summaryLink (3),
-+ asSummaryLink (4),
-+ asExternalLink (5), -- but see ospfExtLsdbTable
-+ multicastLink (6),
-+ nssaExternalLink (7)
-+ }
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "The type of the link state advertisement.
-+ Each link state type has a separate advertise-
-+ ment format."
-+ REFERENCE
-+ "OSPF Version 2, Appendix A.4.1 The Link State
-+ Advertisement header"
-+ ::= { ospfLsdbEntry 2 }
-+
-+ ospfLsdbLsid OBJECT-TYPE
-+ SYNTAX IpAddress
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "The Link State ID is an LS Type Specific field
-+ containing either a Router ID or an IP Address;
-+ it identifies the piece of the routing domain
-+ that is being described by the advertisement."
-+ REFERENCE
-+ "OSPF Version 2, Section 12.1.4 Link State ID"
-+ ::= { ospfLsdbEntry 3 }
-+ ospfLsdbRouterId OBJECT-TYPE
-+ SYNTAX RouterID
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "The 32 bit number that uniquely identifies the
-+ originating router in the Autonomous System."
-+ REFERENCE
-+ "OSPF Version 2, Appendix C.1 Global parameters"
-+ ::= { ospfLsdbEntry 4 }
-+
-+-- Note that the OSPF Sequence Number is a 32 bit signed
-+-- integer. It starts with the value '80000001'h,
-+-- or -'7FFFFFFF'h, and increments until '7FFFFFFF'h
-+-- Thus, a typical sequence number will be very negative.
-+
-+ ospfLsdbSequence OBJECT-TYPE
-+ SYNTAX Integer32
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "The sequence number field is a signed 32-bit
-+ integer. It is used to detect old and dupli-
-+ cate link state advertisements. The space of
-+ sequence numbers is linearly ordered. The
-+ larger the sequence number the more recent the
-+ advertisement."
-+ REFERENCE
-+ "OSPF Version 2, Section 12.1.6 LS sequence
-+ number"
-+ ::= { ospfLsdbEntry 5 }
-+
-+
-+ ospfLsdbAge OBJECT-TYPE
-+ SYNTAX Integer32 -- Should be 0..MaxAge
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "This field is the age of the link state adver-
-+ tisement in seconds."
-+ REFERENCE
-+ "OSPF Version 2, Section 12.1.1 LS age"
-+ ::= { ospfLsdbEntry 6 }
-+
-+ ospfLsdbChecksum OBJECT-TYPE
-+ SYNTAX Integer32
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "This field is the checksum of the complete
-+ contents of the advertisement, excepting the
-+ age field. The age field is excepted so that
-+ an advertisement's age can be incremented
-+ without updating the checksum. The checksum
-+ used is the same that is used for ISO connec-
-+ tionless datagrams; it is commonly referred to
-+ as the Fletcher checksum."
-+ REFERENCE
-+ "OSPF Version 2, Section 12.1.7 LS checksum"
-+ ::= { ospfLsdbEntry 7 }
-+
-+
-+ ospfLsdbAdvertisement OBJECT-TYPE
-+ SYNTAX OCTET STRING (SIZE (1..65535))
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "The entire Link State Advertisement, including
-+ its header."
-+ REFERENCE
-+ "OSPF Version 2, Section 12 Link State Adver-
-+ tisements"
-+ ::= { ospfLsdbEntry 8 }
-+
-+
-+-- Address Range Table
-+
-+-- The Address Range Table acts as an adjunct to the Area
-+-- Table; It describes those Address Range Summaries that
-+-- are configured to be propagated from an Area to reduce
-+-- the amount of information about it which is known beyond
-+-- its borders.
-+
-+ ospfAreaRangeTable OBJECT-TYPE
-+ SYNTAX SEQUENCE OF OspfAreaRangeEntry
-+ MAX-ACCESS not-accessible
-+ STATUS obsolete
-+ DESCRIPTION
-+ "A range if IP addresses specified by an IP
-+ address/IP network mask pair. For example,
-+ class B address range of X.X.X.X with a network
-+ mask of 255.255.0.0 includes all IP addresses
-+ from X.X.0.0 to X.X.255.255"
-+ REFERENCE
-+ "OSPF Version 2, Appendix C.2 Area parameters"
-+ ::= { ospf 5 }
-+ ospfAreaRangeEntry OBJECT-TYPE
-+ SYNTAX OspfAreaRangeEntry
-+ MAX-ACCESS not-accessible
-+ STATUS obsolete
-+ DESCRIPTION
-+ "A range if IP addresses specified by an IP
-+ address/IP network mask pair. For example,
-+ class B address range of X.X.X.X with a network
-+ mask of 255.255.0.0 includes all IP addresses
-+ from X.X.0.0 to X.X.255.255"
-+ REFERENCE
-+ "OSPF Version 2, Appendix C.2 Area parameters"
-+ INDEX { ospfAreaRangeAreaId, ospfAreaRangeNet }
-+ ::= { ospfAreaRangeTable 1 }
-+
-+OspfAreaRangeEntry ::=
-+ SEQUENCE {
-+ ospfAreaRangeAreaId
-+ AreaID,
-+ ospfAreaRangeNet
-+ IpAddress,
-+ ospfAreaRangeMask
-+ IpAddress,
-+ ospfAreaRangeStatus
-+ RowStatus,
-+ ospfAreaRangeEffect
-+ INTEGER
-+ }
-+
-+ ospfAreaRangeAreaId OBJECT-TYPE
-+ SYNTAX AreaID
-+ MAX-ACCESS read-only
-+ STATUS obsolete
-+ DESCRIPTION
-+ "The Area the Address Range is to be found
-+ within."
-+ REFERENCE
-+ "OSPF Version 2, Appendix C.2 Area parameters"
-+ ::= { ospfAreaRangeEntry 1 }
-+
-+
-+ ospfAreaRangeNet OBJECT-TYPE
-+ SYNTAX IpAddress
-+ MAX-ACCESS read-only
-+ STATUS obsolete
-+ DESCRIPTION
-+ "The IP Address of the Net or Subnet indicated
-+ by the range."
-+ REFERENCE
-+ "OSPF Version 2, Appendix C.2 Area parameters"
-+ ::= { ospfAreaRangeEntry 2 }
-+
-+
-+ ospfAreaRangeMask OBJECT-TYPE
-+ SYNTAX IpAddress
-+ MAX-ACCESS read-create
-+ STATUS obsolete
-+ DESCRIPTION
-+ "The Subnet Mask that pertains to the Net or
-+ Subnet."
-+ REFERENCE
-+ "OSPF Version 2, Appendix C.2 Area parameters"
-+ ::= { ospfAreaRangeEntry 3 }
-+
-+ ospfAreaRangeStatus OBJECT-TYPE
-+ SYNTAX RowStatus
-+ MAX-ACCESS read-create
-+ STATUS obsolete
-+ DESCRIPTION
-+ "This variable displays the status of the en-
-+ try. Setting it to 'invalid' has the effect of
-+ rendering it inoperative. The internal effect
-+ (row removal) is implementation dependent."
-+ ::= { ospfAreaRangeEntry 4 }
-+
-+
-+ ospfAreaRangeEffect OBJECT-TYPE
-+ SYNTAX INTEGER {
-+ advertiseMatching (1),
-+ doNotAdvertiseMatching (2)
-+ }
-+ MAX-ACCESS read-create
-+ STATUS obsolete
-+ DESCRIPTION
-+ "Subnets subsumed by ranges either trigger the
-+ advertisement of the indicated summary (adver-
-+ tiseMatching), or result in the subnet's not
-+ being advertised at all outside the area."
-+ DEFVAL { advertiseMatching }
-+ ::= { ospfAreaRangeEntry 5 }
-+
-+
-+
-+-- OSPF Host Table
-+
-+-- The Host/Metric Table indicates what hosts are directly
-+-- attached to the Router, and what metrics and types of
-+-- service should be advertised for them.
-+
-+ ospfHostTable OBJECT-TYPE
-+ SYNTAX SEQUENCE OF OspfHostEntry
-+ MAX-ACCESS not-accessible
-+ STATUS current
-+ DESCRIPTION
-+ "The list of Hosts, and their metrics, that the
-+ router will advertise as host routes."
-+ REFERENCE
-+ "OSPF Version 2, Appendix C.6 Host route param-
-+ eters"
-+ ::= { ospf 6 }
-+
-+
-+ ospfHostEntry OBJECT-TYPE
-+ SYNTAX OspfHostEntry
-+ MAX-ACCESS not-accessible
-+ STATUS current
-+ DESCRIPTION
-+ "A metric to be advertised, for a given type of
-+ service, when a given host is reachable."
-+ INDEX { ospfHostIpAddress, ospfHostTOS }
-+ ::= { ospfHostTable 1 }
-+
-+OspfHostEntry ::=
-+ SEQUENCE {
-+ ospfHostIpAddress
-+ IpAddress,
-+ ospfHostTOS
-+ TOSType,
-+ ospfHostMetric
-+ Metric,
-+ ospfHostStatus
-+ RowStatus,
-+ ospfHostAreaID
-+ AreaID
-+ }
-+
-+ ospfHostIpAddress OBJECT-TYPE
-+ SYNTAX IpAddress
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "The IP Address of the Host."
-+ REFERENCE
-+ "OSPF Version 2, Appendix C.6 Host route parame-
-+ ters"
-+ ::= { ospfHostEntry 1 }
-+
-+
-+ ospfHostTOS OBJECT-TYPE
-+ SYNTAX TOSType
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "The Type of Service of the route being config-
-+ ured."
-+ REFERENCE
-+ "OSPF Version 2, Appendix C.6 Host route parame-
-+ ters"
-+ ::= { ospfHostEntry 2 }
-+
-+
-+ ospfHostMetric OBJECT-TYPE
-+ SYNTAX Metric
-+ MAX-ACCESS read-create
-+ STATUS current
-+ DESCRIPTION
-+ "The Metric to be advertised."
-+ REFERENCE
-+ "OSPF Version 2, Appendix C.6 Host route parame-
-+ ters"
-+ ::= { ospfHostEntry 3 }
-+
-+ ospfHostStatus OBJECT-TYPE
-+ SYNTAX RowStatus
-+ MAX-ACCESS read-create
-+ STATUS current
-+ DESCRIPTION
-+ "This variable displays the status of the en-
-+ try. Setting it to 'invalid' has the effect of
-+ rendering it inoperative. The internal effect
-+ (row removal) is implementation dependent."
-+ ::= { ospfHostEntry 4 }
-+
-+
-+ ospfHostAreaID OBJECT-TYPE
-+ SYNTAX AreaID
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "The Area the Host Entry is to be found within.
-+ By default, the area that a subsuming OSPF in-
-+ terface is in, or 0.0.0.0"
-+ REFERENCE
-+ "OSPF Version 2, Appendix C.2 Area parameters"
-+ ::= { ospfHostEntry 5 }
-+
-+
-+-- OSPF Interface Table
-+
-+-- The OSPF Interface Table augments the ipAddrTable
-+-- with OSPF specific information.
-+
-+ ospfIfTable OBJECT-TYPE
-+ SYNTAX SEQUENCE OF OspfIfEntry
-+ MAX-ACCESS not-accessible
-+ STATUS current
-+ DESCRIPTION
-+ "The OSPF Interface Table describes the inter-
-+ faces from the viewpoint of OSPF."
-+ REFERENCE
-+ "OSPF Version 2, Appendix C.3 Router interface
-+ parameters"
-+ ::= { ospf 7 }
-+
-+
-+ ospfIfEntry OBJECT-TYPE
-+ SYNTAX OspfIfEntry
-+ MAX-ACCESS not-accessible
-+ STATUS current
-+ DESCRIPTION
-+ "The OSPF Interface Entry describes one inter-
-+ face from the viewpoint of OSPF."
-+ INDEX { ospfIfIpAddress, ospfAddressLessIf }
-+ ::= { ospfIfTable 1 }
-+
-+OspfIfEntry ::=
-+ SEQUENCE {
-+ ospfIfIpAddress
-+ IpAddress,
-+ ospfAddressLessIf
-+ Integer32,
-+ ospfIfAreaId
-+ AreaID,
-+ ospfIfType
-+ INTEGER,
-+ ospfIfAdminStat
-+ Status,
-+ ospfIfRtrPriority
-+ DesignatedRouterPriority,
-+ ospfIfTransitDelay
-+ UpToMaxAge,
-+ ospfIfRetransInterval
-+ UpToMaxAge,
-+ ospfIfHelloInterval
-+ HelloRange,
-+ ospfIfRtrDeadInterval
-+ PositiveInteger,
-+ ospfIfPollInterval
-+ PositiveInteger,
-+ ospfIfState
-+ INTEGER,
-+ ospfIfDesignatedRouter
-+ IpAddress,
-+ ospfIfBackupDesignatedRouter
-+ IpAddress,
-+ ospfIfEvents
-+ Counter32,
-+ ospfIfAuthType
-+ INTEGER,
-+ ospfIfAuthKey
-+ OCTET STRING,
-+ ospfIfStatus
-+ RowStatus,
-+ ospfIfMulticastForwarding
-+ INTEGER,
-+ ospfIfDemand
-+ TruthValue
-+ }
-+
-+ ospfIfIpAddress OBJECT-TYPE
-+ SYNTAX IpAddress
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "The IP address of this OSPF interface."
-+ ::= { ospfIfEntry 1 }
-+
-+ ospfAddressLessIf OBJECT-TYPE
-+ SYNTAX Integer32
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "For the purpose of easing the instancing of
-+ addressed and addressless interfaces; This
-+ variable takes the value 0 on interfaces with
-+ IP Addresses, and the corresponding value of
-+ ifIndex for interfaces having no IP Address."
-+ ::= { ospfIfEntry 2 }
-+ ospfIfAreaId OBJECT-TYPE
-+ SYNTAX AreaID
-+ MAX-ACCESS read-create
-+ STATUS current
-+ DESCRIPTION
-+ "A 32-bit integer uniquely identifying the area
-+ to which the interface connects. Area ID
-+ 0.0.0.0 is used for the OSPF backbone."
-+ DEFVAL { '00000000'H } -- 0.0.0.0
-+ ::= { ospfIfEntry 3 }
-+
-+ ospfIfType OBJECT-TYPE
-+ SYNTAX INTEGER {
-+ broadcast (1),
-+ nbma (2),
-+ pointToPoint (3),
-+ pointToMultipoint (5)
-+ }
-+ MAX-ACCESS read-create
-+ STATUS current
-+ DESCRIPTION
-+ "The OSPF interface type.
-+
-+ By way of a default, this field may be intuited
-+ from the corresponding value of ifType. Broad-
-+ cast LANs, such as Ethernet and IEEE 802.5,
-+ take the value 'broadcast', X.25 and similar
-+ technologies take the value 'nbma', and links
-+ that are definitively point to point take the
-+ value 'pointToPoint'."
-+ ::= { ospfIfEntry 4 }
-+
-+
-+ ospfIfAdminStat OBJECT-TYPE
-+ SYNTAX Status
-+ MAX-ACCESS read-create
-+ STATUS current
-+ DESCRIPTION
-+ "The OSPF interface's administrative status.
-+ The value formed on the interface, and the in-
-+ terface will be advertised as an internal route
-+ to some area. The value 'disabled' denotes
-+ that the interface is external to OSPF."
-+ DEFVAL { enabled }
-+ ::= { ospfIfEntry 5 }
-+
-+ ospfIfRtrPriority OBJECT-TYPE
-+ SYNTAX DesignatedRouterPriority
-+ MAX-ACCESS read-create
-+ STATUS current
-+ DESCRIPTION
-+ "The priority of this interface. Used in
-+ multi-access networks, this field is used in
-+ the designated router election algorithm. The
-+ value 0 signifies that the router is not eligi-
-+ ble to become the designated router on this
-+ particular network. In the event of a tie in
-+ this value, routers will use their Router ID as
-+ a tie breaker."
-+ DEFVAL { 1 }
-+ ::= { ospfIfEntry 6 }
-+
-+
-+ ospfIfTransitDelay OBJECT-TYPE
-+ SYNTAX UpToMaxAge
-+ MAX-ACCESS read-create
-+ STATUS current
-+ DESCRIPTION
-+ "The estimated number of seconds it takes to
-+ transmit a link state update packet over this
-+ interface."
-+ DEFVAL { 1 }
-+ ::= { ospfIfEntry 7 }
-+
-+
-+ ospfIfRetransInterval OBJECT-TYPE
-+ SYNTAX UpToMaxAge
-+ MAX-ACCESS read-create
-+ STATUS current
-+ DESCRIPTION
-+ "The number of seconds between link-state ad-
-+ vertisement retransmissions, for adjacencies
-+ belonging to this interface. This value is
-+ also used when retransmitting database descrip-
-+ tion and link-state request packets."
-+ DEFVAL { 5 }
-+ ::= { ospfIfEntry 8 }
-+
-+
-+ ospfIfHelloInterval OBJECT-TYPE
-+ SYNTAX HelloRange
-+ MAX-ACCESS read-create
-+ STATUS current
-+ DESCRIPTION
-+ "The length of time, in seconds, between the
-+ Hello packets that the router sends on the in-
-+ terface. This value must be the same for all
-+ routers attached to a common network."
-+ DEFVAL { 10 }
-+ ::= { ospfIfEntry 9 }
-+
-+
-+ ospfIfRtrDeadInterval OBJECT-TYPE
-+ SYNTAX PositiveInteger
-+ MAX-ACCESS read-create
-+ STATUS current
-+ DESCRIPTION
-+ "The number of seconds that a router's Hello
-+ packets have not been seen before it's neigh-
-+ bors declare the router down. This should be
-+ some multiple of the Hello interval. This
-+ value must be the same for all routers attached
-+ to a common network."
-+ DEFVAL { 40 }
-+ ::= { ospfIfEntry 10 }
-+
-+
-+ ospfIfPollInterval OBJECT-TYPE
-+ SYNTAX PositiveInteger
-+ MAX-ACCESS read-create
-+ STATUS current
-+ DESCRIPTION
-+ "The larger time interval, in seconds, between
-+ the Hello packets sent to an inactive non-
-+ broadcast multi- access neighbor."
-+ DEFVAL { 120 }
-+ ::= { ospfIfEntry 11 }
-+
-+
-+ ospfIfState OBJECT-TYPE
-+ SYNTAX INTEGER {
-+ down (1),
-+ loopback (2),
-+ waiting (3),
-+ pointToPoint (4),
-+ designatedRouter (5),
-+ backupDesignatedRouter (6),
-+ otherDesignatedRouter (7)
-+ }
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "The OSPF Interface State."
-+ DEFVAL { down }
-+ ::= { ospfIfEntry 12 }
-+
-+
-+ ospfIfDesignatedRouter OBJECT-TYPE
-+ SYNTAX IpAddress
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "The IP Address of the Designated Router."
-+ DEFVAL { '00000000'H } -- 0.0.0.0
-+ ::= { ospfIfEntry 13 }
-+
-+
-+ ospfIfBackupDesignatedRouter OBJECT-TYPE
-+ SYNTAX IpAddress
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "The IP Address of the Backup Designated
-+ Router."
-+ DEFVAL { '00000000'H } -- 0.0.0.0
-+ ::= { ospfIfEntry 14 }
-+
-+ ospfIfEvents OBJECT-TYPE
-+ SYNTAX Counter32
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "The number of times this OSPF interface has
-+ changed its state, or an error has occurred."
-+ ::= { ospfIfEntry 15 }
-+
-+
-+ ospfIfAuthKey OBJECT-TYPE
-+ SYNTAX OCTET STRING (SIZE (0..256))
-+ MAX-ACCESS read-create
-+ STATUS current
-+ DESCRIPTION
-+ "The Authentication Key. If the Area's Author-
-+ ization Type is simplePassword, and the key
-+ length is shorter than 8 octets, the agent will
-+ left adjust and zero fill to 8 octets.
-+
-+ Note that unauthenticated interfaces need no
-+ authentication key, and simple password authen-
-+ tication cannot use a key of more than 8 oc-
-+ tets. Larger keys are useful only with authen-
-+ tication mechanisms not specified in this docu-
-+ ment.
-+
-+ When read, ospfIfAuthKey always returns an Oc-
-+ tet String of length zero."
-+ REFERENCE
-+ "OSPF Version 2, Section 9 The Interface Data
-+ Structure"
-+ DEFVAL { '0000000000000000'H } -- 0.0.0.0.0.0.0.0
-+ ::= { ospfIfEntry 16 }
-+
-+ ospfIfStatus OBJECT-TYPE
-+ SYNTAX RowStatus
-+ MAX-ACCESS read-create
-+ STATUS current
-+ DESCRIPTION
-+ "This variable displays the status of the en-
-+ try. Setting it to 'invalid' has the effect of
-+ rendering it inoperative. The internal effect
-+ (row removal) is implementation dependent."
-+ ::= { ospfIfEntry 17 }
-+
-+
-+ ospfIfMulticastForwarding OBJECT-TYPE
-+ SYNTAX INTEGER {
-+ blocked (1), -- no multicast forwarding
-+ multicast (2), -- using multicast address
-+ unicast (3) -- to each OSPF neighbor
-+ }
-+ MAX-ACCESS read-create
-+ STATUS current
-+ DESCRIPTION
-+ "The way multicasts should forwarded on this
-+ interface; not forwarded, forwarded as data
-+ link multicasts, or forwarded as data link uni-
-+ casts. Data link multicasting is not meaning-
-+ ful on point to point and NBMA interfaces, and
-+ setting ospfMulticastForwarding to 0 effective-
-+ ly disables all multicast forwarding."
-+ DEFVAL { blocked }
-+ ::= { ospfIfEntry 18 }
-+
-+
-+ ospfIfDemand OBJECT-TYPE
-+ SYNTAX TruthValue
-+ MAX-ACCESS read-create
-+ STATUS current
-+ DESCRIPTION
-+ "Indicates whether Demand OSPF procedures (hel-
-+ lo supression to FULL neighbors and setting the
-+ DoNotAge flag on proogated LSAs) should be per-
-+ formed on this interface."
-+ DEFVAL { false }
-+ ::= { ospfIfEntry 19 }
-+
-+
-+ ospfIfAuthType OBJECT-TYPE
-+ SYNTAX INTEGER (0..255)
-+ -- none (0),
-+ -- simplePassword (1)
-+ -- md5 (2)
-+ -- reserved for specification by IANA (> 2)
-+ MAX-ACCESS read-create
-+ STATUS current
-+ DESCRIPTION
-+ "The authentication type specified for an in-
-+ terface. Additional authentication types may
-+ be assigned locally."
-+ REFERENCE
-+ "OSPF Version 2, Appendix E Authentication"
-+ DEFVAL { 0 } -- no authentication, by default
-+ ::= { ospfIfEntry 20 }
-+
-+
-+-- OSPF Interface Metric Table
-+
-+-- The Metric Table describes the metrics to be advertised
-+-- for a specified interface at the various types of service.
-+-- As such, this table is an adjunct of the OSPF Interface
-+-- Table.
-+
-+-- Types of service, as defined by RFC 791, have the ability
-+-- to request low delay, high bandwidth, or reliable linkage.
-+
-+-- For the purposes of this specification, the measure of
-+-- bandwidth
-+
-+-- Metric = 10^8 / ifSpeed
-+
-+-- is the default value. For multiple link interfaces, note
-+-- that ifSpeed is the sum of the individual link speeds.
-+-- This yields a number having the following typical values:
-+
-+-- Network Type/bit rate Metric
-+
-+-- >= 100 MBPS 1
-+-- Ethernet/802.3 10
-+-- E1 48
-+-- T1 (ESF) 65
-+-- 64 KBPS 1562
-+-- 56 KBPS 1785
-+-- 19.2 KBPS 5208
-+-- 9.6 KBPS 10416
-+
-+-- Routes that are not specified use the default (TOS 0) metric
-+
-+ ospfIfMetricTable OBJECT-TYPE
-+ SYNTAX SEQUENCE OF OspfIfMetricEntry
-+ MAX-ACCESS not-accessible
-+ STATUS current
-+ DESCRIPTION
-+ "The TOS metrics for a non-virtual interface
-+ identified by the interface index."
-+ REFERENCE
-+ "OSPF Version 2, Appendix C.3 Router interface
-+ parameters"
-+ ::= { ospf 8 }
-+
-+ ospfIfMetricEntry OBJECT-TYPE
-+ SYNTAX OspfIfMetricEntry
-+ MAX-ACCESS not-accessible
-+ STATUS current
-+ DESCRIPTION
-+ "A particular TOS metric for a non-virtual in-
-+ terface identified by the interface index."
-+ REFERENCE
-+ "OSPF Version 2, Appendix C.3 Router interface
-+ parameters"
-+ INDEX { ospfIfMetricIpAddress,
-+ ospfIfMetricAddressLessIf,
-+ ospfIfMetricTOS }
-+ ::= { ospfIfMetricTable 1 }
-+
-+OspfIfMetricEntry ::=
-+ SEQUENCE {
-+ ospfIfMetricIpAddress
-+ IpAddress,
-+ ospfIfMetricAddressLessIf
-+ Integer32,
-+ ospfIfMetricTOS
-+ TOSType,
-+ ospfIfMetricValue
-+ Metric,
-+ ospfIfMetricStatus
-+ RowStatus
-+ }
-+
-+ ospfIfMetricIpAddress OBJECT-TYPE
-+ SYNTAX IpAddress
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "The IP address of this OSPF interface. On row
-+ creation, this can be derived from the in-
-+ stance."
-+ ::= { ospfIfMetricEntry 1 }
-+
-+ ospfIfMetricAddressLessIf OBJECT-TYPE
-+ SYNTAX Integer32
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "For the purpose of easing the instancing of
-+ addressed and addressless interfaces; This
-+ variable takes the value 0 on interfaces with
-+ IP Addresses, and the value of ifIndex for in-
-+ terfaces having no IP Address. On row crea-
-+ tion, this can be derived from the instance."
-+ ::= { ospfIfMetricEntry 2 }
-+
-+
-+ ospfIfMetricTOS OBJECT-TYPE
-+ SYNTAX TOSType
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "The type of service metric being referenced.
-+ On row creation, this can be derived from the
-+ instance."
-+ ::= { ospfIfMetricEntry 3 }
-+
-+
-+ ospfIfMetricValue OBJECT-TYPE
-+ SYNTAX Metric
-+ MAX-ACCESS read-create
-+ STATUS current
-+ DESCRIPTION
-+ "The metric of using this type of service on
-+ this interface. The default value of the TOS 0
-+ Metric is 10^8 / ifSpeed."
-+ ::= { ospfIfMetricEntry 4 }
-+
-+ ospfIfMetricStatus OBJECT-TYPE
-+ SYNTAX RowStatus
-+ MAX-ACCESS read-create
-+ STATUS current
-+ DESCRIPTION
-+ "This variable displays the status of the en-
-+ try. Setting it to 'invalid' has the effect of
-+ rendering it inoperative. The internal effect
-+ (row removal) is implementation dependent."
-+ ::= { ospfIfMetricEntry 5 }
-+
-+
-+-- OSPF Virtual Interface Table
-+
-+-- The Virtual Interface Table describes the virtual
-+-- links that the OSPF Process is configured to
-+-- carry on.
-+
-+ ospfVirtIfTable OBJECT-TYPE
-+ SYNTAX SEQUENCE OF OspfVirtIfEntry
-+ MAX-ACCESS not-accessible
-+ STATUS current
-+ DESCRIPTION
-+ "Information about this router's virtual inter-
-+ faces."
-+ REFERENCE
-+ "OSPF Version 2, Appendix C.4 Virtual link
-+ parameters"
-+ ::= { ospf 9 }
-+
-+
-+ ospfVirtIfEntry OBJECT-TYPE
-+ SYNTAX OspfVirtIfEntry
-+ MAX-ACCESS not-accessible
-+ STATUS current
-+ DESCRIPTION
-+ "Information about a single Virtual Interface."
-+ INDEX { ospfVirtIfAreaId, ospfVirtIfNeighbor }
-+ ::= { ospfVirtIfTable 1 }
-+
-+OspfVirtIfEntry ::=
-+ SEQUENCE {
-+ ospfVirtIfAreaId
-+ AreaID,
-+ ospfVirtIfNeighbor
-+ RouterID,
-+ ospfVirtIfTransitDelay
-+ UpToMaxAge,
-+ ospfVirtIfRetransInterval
-+ UpToMaxAge,
-+ ospfVirtIfHelloInterval
-+ HelloRange,
-+ ospfVirtIfRtrDeadInterval
-+ PositiveInteger,
-+ ospfVirtIfState
-+ INTEGER,
-+ ospfVirtIfEvents
-+ Counter32,
-+ ospfVirtIfAuthType
-+ INTEGER,
-+ ospfVirtIfAuthKey
-+ OCTET STRING,
-+ ospfVirtIfStatus
-+ RowStatus
-+ }
-+
-+ ospfVirtIfAreaId OBJECT-TYPE
-+ SYNTAX AreaID
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "The Transit Area that the Virtual Link
-+ traverses. By definition, this is not 0.0.0.0"
-+ ::= { ospfVirtIfEntry 1 }
-+
-+
-+ ospfVirtIfNeighbor OBJECT-TYPE
-+ SYNTAX RouterID
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "The Router ID of the Virtual Neighbor."
-+ ::= { ospfVirtIfEntry 2 }
-+
-+
-+ ospfVirtIfTransitDelay OBJECT-TYPE
-+ SYNTAX UpToMaxAge
-+ MAX-ACCESS read-create
-+ STATUS current
-+ DESCRIPTION
-+ "The estimated number of seconds it takes to
-+ transmit a link- state update packet over this
-+ interface."
-+ DEFVAL { 1 }
-+ ::= { ospfVirtIfEntry 3 }
-+
-+
-+ ospfVirtIfRetransInterval OBJECT-TYPE
-+ SYNTAX UpToMaxAge
-+ MAX-ACCESS read-create
-+ STATUS current
-+ DESCRIPTION
-+ "The number of seconds between link-state ad-
-+ vertisement retransmissions, for adjacencies
-+ belonging to this interface. This value is
-+ also used when retransmitting database descrip-
-+ tion and link-state request packets. This
-+ value should be well over the expected round-
-+ trip time."
-+ DEFVAL { 5 }
-+ ::= { ospfVirtIfEntry 4 }
-+
-+
-+ ospfVirtIfHelloInterval OBJECT-TYPE
-+ SYNTAX HelloRange
-+ MAX-ACCESS read-create
-+ STATUS current
-+ DESCRIPTION
-+ "The length of time, in seconds, between the
-+ Hello packets that the router sends on the in-
-+ terface. This value must be the same for the
-+ virtual neighbor."
-+ DEFVAL { 10 }
-+ ::= { ospfVirtIfEntry 5 }
-+
-+
-+ ospfVirtIfRtrDeadInterval OBJECT-TYPE
-+ SYNTAX PositiveInteger
-+ MAX-ACCESS read-create
-+ STATUS current
-+ DESCRIPTION
-+ "The number of seconds that a router's Hello
-+ packets have not been seen before it's neigh-
-+ bors declare the router down. This should be
-+ some multiple of the Hello interval. This
-+ value must be the same for the virtual neigh-
-+ bor."
-+ DEFVAL { 60 }
-+ ::= { ospfVirtIfEntry 6 }
-+
-+
-+ ospfVirtIfState OBJECT-TYPE
-+ SYNTAX INTEGER {
-+ down (1), -- these use the same encoding
-+ pointToPoint (4) -- as the ospfIfTable
-+ }
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "OSPF virtual interface states."
-+ DEFVAL { down }
-+ ::= { ospfVirtIfEntry 7 }
-+
-+
-+ ospfVirtIfEvents OBJECT-TYPE
-+ SYNTAX Counter32
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "The number of state changes or error events on
-+ this Virtual Link"
-+ ::= { ospfVirtIfEntry 8 }
-+
-+
-+ ospfVirtIfAuthKey OBJECT-TYPE
-+ SYNTAX OCTET STRING (SIZE(0..256))
-+ MAX-ACCESS read-create
-+ STATUS current
-+ DESCRIPTION
-+ "If Authentication Type is simplePassword, the
-+ device will left adjust and zero fill to 8 oc-
-+ tets.
-+
-+ Note that unauthenticated interfaces need no
-+ authentication key, and simple password authen-
-+ tication cannot use a key of more than 8 oc-
-+ tets. Larger keys are useful only with authen-
-+ tication mechanisms not specified in this docu-
-+ ment.
-+
-+ When read, ospfVifAuthKey always returns a
-+ string of length zero."
-+ REFERENCE
-+ "OSPF Version 2, Section 9 The Interface Data
-+ Structure"
-+ DEFVAL { '0000000000000000'H } -- 0.0.0.0.0.0.0.0
-+ ::= { ospfVirtIfEntry 9 }
-+
-+
-+ ospfVirtIfStatus OBJECT-TYPE
-+ SYNTAX RowStatus
-+ MAX-ACCESS read-create
-+ STATUS current
-+ DESCRIPTION
-+ "This variable displays the status of the en-
-+ try. Setting it to 'invalid' has the effect of
-+ rendering it inoperative. The internal effect
-+ (row removal) is implementation dependent."
-+ ::= { ospfVirtIfEntry 10 }
-+
-+
-+ ospfVirtIfAuthType OBJECT-TYPE
-+ SYNTAX INTEGER (0..255)
-+ -- none (0),
-+ -- simplePassword (1)
-+ -- md5 (2)
-+ -- reserved for specification by IANA (> 2)
-+ MAX-ACCESS read-create
-+ STATUS current
-+ DESCRIPTION
-+ "The authentication type specified for a virtu-
-+ al interface. Additional authentication types
-+ may be assigned locally."
-+ REFERENCE
-+ "OSPF Version 2, Appendix E Authentication"
-+ DEFVAL { 0 } -- no authentication, by default
-+ ::= { ospfVirtIfEntry 11 }
-+
-+
-+-- OSPF Neighbor Table
-+
-+-- The OSPF Neighbor Table describes all neighbors in
-+-- the locality of the subject router.
-+
-+ ospfNbrTable OBJECT-TYPE
-+ SYNTAX SEQUENCE OF OspfNbrEntry
-+ MAX-ACCESS not-accessible
-+ STATUS current
-+ DESCRIPTION
-+ "A table of non-virtual neighbor information."
-+ REFERENCE
-+ "OSPF Version 2, Section 10 The Neighbor Data
-+ Structure"
-+ ::= { ospf 10 }
-+
-+
-+ ospfNbrEntry OBJECT-TYPE
-+ SYNTAX OspfNbrEntry
-+ MAX-ACCESS not-accessible
-+ STATUS current
-+ DESCRIPTION
-+ "The information regarding a single neighbor."
-+ REFERENCE
-+ "OSPF Version 2, Section 10 The Neighbor Data
-+ Structure"
-+ INDEX { ospfNbrIpAddr, ospfNbrAddressLessIndex }
-+ ::= { ospfNbrTable 1 }
-+
-+OspfNbrEntry ::=
-+ SEQUENCE {
-+ ospfNbrIpAddr
-+ IpAddress,
-+ ospfNbrAddressLessIndex
-+ InterfaceIndex,
-+ ospfNbrRtrId
-+ RouterID,
-+ ospfNbrOptions
-+ Integer32,
-+ ospfNbrPriority
-+ DesignatedRouterPriority,
-+ ospfNbrState
-+ INTEGER,
-+ ospfNbrEvents
-+ Counter32,
-+ ospfNbrLsRetransQLen
-+ Gauge32,
-+ ospfNbmaNbrStatus
-+ RowStatus,
-+ ospfNbmaNbrPermanence
-+ INTEGER,
-+ ospfNbrHelloSuppressed
-+ TruthValue
-+ }
-+
-+ ospfNbrIpAddr OBJECT-TYPE
-+ SYNTAX IpAddress
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "The IP address this neighbor is using in its
-+ IP Source Address. Note that, on addressless
-+ links, this will not be 0.0.0.0, but the ad-
-+ dress of another of the neighbor's interfaces."
-+ ::= { ospfNbrEntry 1 }
-+
-+
-+ ospfNbrAddressLessIndex OBJECT-TYPE
-+ SYNTAX InterfaceIndex
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "On an interface having an IP Address, zero.
-+ On addressless interfaces, the corresponding
-+ value of ifIndex in the Internet Standard MIB.
-+ On row creation, this can be derived from the
-+ instance."
-+ ::= { ospfNbrEntry 2 }
-+
-+
-+ ospfNbrRtrId OBJECT-TYPE
-+ SYNTAX RouterID
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "A 32-bit integer (represented as a type IpAd-
-+ dress) uniquely identifying the neighboring
-+ router in the Autonomous System."
-+ DEFVAL { '00000000'H } -- 0.0.0.0
-+ ::= { ospfNbrEntry 3 }
-+
-+
-+ ospfNbrOptions OBJECT-TYPE
-+ SYNTAX Integer32
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "A Bit Mask corresponding to the neighbor's op-
-+ tions field.
-+
-+ Bit 0, if set, indicates that the system will
-+ operate on Type of Service metrics other than
-+ TOS 0. If zero, the neighbor will ignore all
-+ metrics except the TOS 0 metric.
-+
-+ Bit 1, if set, indicates that the associated
-+ area accepts and operates on external informa-
-+ tion; if zero, it is a stub area.
-+
-+ Bit 2, if set, indicates that the system is ca-
-+ pable of routing IP Multicast datagrams; i.e.,
-+ that it implements the Multicast Extensions to
-+ OSPF.
-+
-+ Bit 3, if set, indicates that the associated
-+ area is an NSSA. These areas are capable of
-+ carrying type 7 external advertisements, which
-+ are translated into type 5 external advertise-
-+ ments at NSSA borders."
-+ REFERENCE
-+ "OSPF Version 2, Section 12.1.2 Options"
-+ DEFVAL { 0 }
-+ ::= { ospfNbrEntry 4 }
-+
-+
-+ ospfNbrPriority OBJECT-TYPE
-+ SYNTAX DesignatedRouterPriority
-+ MAX-ACCESS read-create
-+ STATUS current
-+ DESCRIPTION
-+ "The priority of this neighbor in the designat-
-+ ed router election algorithm. The value 0 sig-
-+ nifies that the neighbor is not eligible to be-
-+ come the designated router on this particular
-+ network."
-+ DEFVAL { 1 }
-+ ::= { ospfNbrEntry 5 }
-+
-+
-+ ospfNbrState OBJECT-TYPE
-+ SYNTAX INTEGER {
-+ down (1),
-+ attempt (2),
-+ init (3),
-+ twoWay (4),
-+ exchangeStart (5),
-+ exchange (6),
-+ loading (7),
-+ full (8)
-+ }
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "The State of the relationship with this Neigh-
-+ bor."
-+ REFERENCE
-+ "OSPF Version 2, Section 10.1 Neighbor States"
-+ DEFVAL { down }
-+ ::= { ospfNbrEntry 6 }
-+
-+
-+ ospfNbrEvents OBJECT-TYPE
-+ SYNTAX Counter32
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "The number of times this neighbor relationship
-+ has changed state, or an error has occurred."
-+ ::= { ospfNbrEntry 7 }
-+
-+
-+ ospfNbrLsRetransQLen OBJECT-TYPE
-+ SYNTAX Gauge32
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "The current length of the retransmission
-+ queue."
-+ ::= { ospfNbrEntry 8 }
-+
-+
-+ ospfNbmaNbrStatus OBJECT-TYPE
-+ SYNTAX RowStatus
-+ MAX-ACCESS read-create
-+ STATUS current
-+ DESCRIPTION
-+ "This variable displays the status of the en-
-+ try. Setting it to 'invalid' has the effect of
-+ rendering it inoperative. The internal effect
-+ (row removal) is implementation dependent."
-+ ::= { ospfNbrEntry 9 }
-+
-+
-+ ospfNbmaNbrPermanence OBJECT-TYPE
-+ SYNTAX INTEGER {
-+ dynamic (1), -- learned through protocol
-+ permanent (2) -- configured address
-+ }
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "This variable displays the status of the en-
-+ try. 'dynamic' and 'permanent' refer to how
-+ the neighbor became known."
-+ DEFVAL { permanent }
-+ ::= { ospfNbrEntry 10 }
-+
-+
-+ ospfNbrHelloSuppressed OBJECT-TYPE
-+ SYNTAX TruthValue
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "Indicates whether Hellos are being suppressed
-+ to the neighbor"
-+ ::= { ospfNbrEntry 11 }
-+
-+
-+-- OSPF Virtual Neighbor Table
-+
-+-- This table describes all virtual neighbors.
-+-- Since Virtual Links are configured in the
-+-- virtual interface table, this table is read-only.
-+
-+ ospfVirtNbrTable OBJECT-TYPE
-+ SYNTAX SEQUENCE OF OspfVirtNbrEntry
-+ MAX-ACCESS not-accessible
-+ STATUS current
-+ DESCRIPTION
-+ "A table of virtual neighbor information."
-+ REFERENCE
-+ "OSPF Version 2, Section 15 Virtual Links"
-+ ::= { ospf 11 }
-+
-+
-+ ospfVirtNbrEntry OBJECT-TYPE
-+ SYNTAX OspfVirtNbrEntry
-+ MAX-ACCESS not-accessible
-+ STATUS current
-+ DESCRIPTION
-+ "Virtual neighbor information."
-+ INDEX { ospfVirtNbrArea, ospfVirtNbrRtrId }
-+ ::= { ospfVirtNbrTable 1 }
-+
-+OspfVirtNbrEntry ::=
-+ SEQUENCE {
-+ ospfVirtNbrArea
-+ AreaID,
-+ ospfVirtNbrRtrId
-+ RouterID,
-+ ospfVirtNbrIpAddr
-+ IpAddress,
-+ ospfVirtNbrOptions
-+ Integer32,
-+ ospfVirtNbrState
-+ INTEGER,
-+ ospfVirtNbrEvents
-+ Counter32,
-+ ospfVirtNbrLsRetransQLen
-+ Gauge32,
-+ ospfVirtNbrHelloSuppressed
-+ TruthValue
-+ }
-+
-+ ospfVirtNbrArea OBJECT-TYPE
-+ SYNTAX AreaID
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "The Transit Area Identifier."
-+ ::= { ospfVirtNbrEntry 1 }
-+
-+
-+ ospfVirtNbrRtrId OBJECT-TYPE
-+ SYNTAX RouterID
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "A 32-bit integer uniquely identifying the
-+ neighboring router in the Autonomous System."
-+ ::= { ospfVirtNbrEntry 2 }
-+
-+
-+ ospfVirtNbrIpAddr OBJECT-TYPE
-+ SYNTAX IpAddress
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "The IP address this Virtual Neighbor is us-
-+ ing."
-+ ::= { ospfVirtNbrEntry 3 }
-+
-+
-+ ospfVirtNbrOptions OBJECT-TYPE
-+ SYNTAX Integer32
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "A Bit Mask corresponding to the neighbor's op-
-+ tions field.
-+
-+ Bit 1, if set, indicates that the system will
-+ operate on Type of Service metrics other than
-+ TOS 0. If zero, the neighbor will ignore all
-+ metrics except the TOS 0 metric.
-+
-+ Bit 2, if set, indicates that the system is
-+ Network Multicast capable; ie, that it imple-
-+ ments OSPF Multicast Routing."
-+ ::= { ospfVirtNbrEntry 4 }
-+ ospfVirtNbrState OBJECT-TYPE
-+ SYNTAX INTEGER {
-+ down (1),
-+ attempt (2),
-+ init (3),
-+ twoWay (4),
-+ exchangeStart (5),
-+ exchange (6),
-+ loading (7),
-+ full (8)
-+ }
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "The state of the Virtual Neighbor Relation-
-+ ship."
-+ ::= { ospfVirtNbrEntry 5 }
-+
-+
-+ ospfVirtNbrEvents OBJECT-TYPE
-+ SYNTAX Counter32
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "The number of times this virtual link has
-+ changed its state, or an error has occurred."
-+ ::= { ospfVirtNbrEntry 6 }
-+
-+
-+ ospfVirtNbrLsRetransQLen OBJECT-TYPE
-+ SYNTAX Gauge32
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "The current length of the retransmission
-+ queue."
-+ ::= { ospfVirtNbrEntry 7 }
-+
-+
-+ ospfVirtNbrHelloSuppressed OBJECT-TYPE
-+ SYNTAX TruthValue
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "Indicates whether Hellos are being suppressed
-+ to the neighbor"
-+ ::= { ospfVirtNbrEntry 8 }
-+
-+-- OSPF Link State Database, External
-+
-+-- The Link State Database contains the Link State
-+-- Advertisements from throughout the areas that the
-+-- device is attached to.
-+
-+-- This table is identical to the OSPF LSDB Table in
-+-- format, but contains only External Link State
-+-- Advertisements. The purpose is to allow external
-+-- LSAs to be displayed once for the router rather
-+-- than once in each non-stub area.
-+
-+ ospfExtLsdbTable OBJECT-TYPE
-+ SYNTAX SEQUENCE OF OspfExtLsdbEntry
-+ MAX-ACCESS not-accessible
-+ STATUS current
-+ DESCRIPTION
-+ "The OSPF Process's Links State Database."
-+ REFERENCE
-+ "OSPF Version 2, Section 12 Link State Adver-
-+ tisements"
-+ ::= { ospf 12 }
-+
-+
-+ ospfExtLsdbEntry OBJECT-TYPE
-+ SYNTAX OspfExtLsdbEntry
-+ MAX-ACCESS not-accessible
-+ STATUS current
-+ DESCRIPTION
-+ "A single Link State Advertisement."
-+ INDEX { ospfExtLsdbType, ospfExtLsdbLsid, ospfExtLsdbRouterId }
-+ ::= { ospfExtLsdbTable 1 }
-+
-+OspfExtLsdbEntry ::=
-+ SEQUENCE {
-+ ospfExtLsdbType
-+ INTEGER,
-+ ospfExtLsdbLsid
-+ IpAddress,
-+ ospfExtLsdbRouterId
-+ RouterID,
-+ ospfExtLsdbSequence
-+ Integer32,
-+ ospfExtLsdbAge
-+ Integer32,
-+ ospfExtLsdbChecksum
-+ Integer32,
-+ ospfExtLsdbAdvertisement
-+ OCTET STRING
-+ }
-+
-+ ospfExtLsdbType OBJECT-TYPE
-+ SYNTAX INTEGER {
-+ asExternalLink (5)
-+ }
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "The type of the link state advertisement.
-+ Each link state type has a separate advertise-
-+ ment format."
-+ REFERENCE
-+ "OSPF Version 2, Appendix A.4.1 The Link State
-+ Advertisement header"
-+ ::= { ospfExtLsdbEntry 1 }
-+
-+
-+ ospfExtLsdbLsid OBJECT-TYPE
-+ SYNTAX IpAddress
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "The Link State ID is an LS Type Specific field
-+ containing either a Router ID or an IP Address;
-+ it identifies the piece of the routing domain
-+ that is being described by the advertisement."
-+ REFERENCE
-+ "OSPF Version 2, Section 12.1.4 Link State ID"
-+ ::= { ospfExtLsdbEntry 2 }
-+
-+
-+ ospfExtLsdbRouterId OBJECT-TYPE
-+ SYNTAX RouterID
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "The 32 bit number that uniquely identifies the
-+ originating router in the Autonomous System."
-+ REFERENCE
-+ "OSPF Version 2, Appendix C.1 Global parameters"
-+ ::= { ospfExtLsdbEntry 3 }
-+
-+-- Note that the OSPF Sequence Number is a 32 bit signed
-+-- integer. It starts with the value '80000001'h,
-+-- or -'7FFFFFFF'h, and increments until '7FFFFFFF'h
-+-- Thus, a typical sequence number will be very negative.
-+ ospfExtLsdbSequence OBJECT-TYPE
-+ SYNTAX Integer32
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "The sequence number field is a signed 32-bit
-+ integer. It is used to detect old and dupli-
-+ cate link state advertisements. The space of
-+ sequence numbers is linearly ordered. The
-+ larger the sequence number the more recent the
-+ advertisement."
-+ REFERENCE
-+ "OSPF Version 2, Section 12.1.6 LS sequence
-+ number"
-+ ::= { ospfExtLsdbEntry 4 }
-+
-+
-+ ospfExtLsdbAge OBJECT-TYPE
-+ SYNTAX Integer32 -- Should be 0..MaxAge
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "This field is the age of the link state adver-
-+ tisement in seconds."
-+ REFERENCE
-+ "OSPF Version 2, Section 12.1.1 LS age"
-+ ::= { ospfExtLsdbEntry 5 }
-+
-+
-+ ospfExtLsdbChecksum OBJECT-TYPE
-+ SYNTAX Integer32
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "This field is the checksum of the complete
-+ contents of the advertisement, excepting the
-+ age field. The age field is excepted so that
-+ an advertisement's age can be incremented
-+ without updating the checksum. The checksum
-+ used is the same that is used for ISO connec-
-+ tionless datagrams; it is commonly referred to
-+ as the Fletcher checksum."
-+ REFERENCE
-+ "OSPF Version 2, Section 12.1.7 LS checksum"
-+ ::= { ospfExtLsdbEntry 6 }
-+
-+
-+ ospfExtLsdbAdvertisement OBJECT-TYPE
-+ SYNTAX OCTET STRING (SIZE(36))
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "The entire Link State Advertisement, including
-+ its header."
-+ REFERENCE
-+ "OSPF Version 2, Section 12 Link State Adver-
-+ tisements"
-+ ::= { ospfExtLsdbEntry 7 }
-+
-+
-+-- OSPF Use of the CIDR Route Table
-+
-+ospfRouteGroup OBJECT IDENTIFIER ::= { ospf 13 }
-+
-+-- The IP Forwarding Table defines a number of objects for use by
-+-- the routing protocol to externalize its information. Most of
-+-- the variables (ipForwardDest, ipForwardMask, ipForwardPolicy,
-+-- ipForwardNextHop, ipForwardIfIndex, ipForwardType,
-+-- ipForwardProto, ipForwardAge, and ipForwardNextHopAS) are
-+-- defined there.
-+
-+-- Those that leave some discretion are defined here.
-+
-+-- ipCidrRouteProto is, of course, ospf (13).
-+
-+-- ipCidrRouteAge is the time since the route was first calculated,
-+-- as opposed to the time since the last SPF run.
-+
-+-- ipCidrRouteInfo is an OBJECT IDENTIFIER for use by the routing
-+-- protocol. The following values shall be found there depending
-+-- on the way the route was calculated.
-+
-+ospfIntraArea OBJECT IDENTIFIER ::= { ospfRouteGroup 1 }
-+ospfInterArea OBJECT IDENTIFIER ::= { ospfRouteGroup 2 }
-+ospfExternalType1 OBJECT IDENTIFIER ::= { ospfRouteGroup 3 }
-+ospfExternalType2 OBJECT IDENTIFIER ::= { ospfRouteGroup 4 }
-+
-+-- ipCidrRouteMetric1 is, by definition, the primary routing
-+-- metric. Therefore, it should be the metric that route
-+-- selection is based on. For intra-area and inter-area routes,
-+-- it is an OSPF metric. For External Type 1 (comparable value)
-+-- routes, it is an OSPF metric plus the External Metric. For
-+-- external Type 2 (non-comparable value) routes, it is the
-+-- external metric.
-+
-+-- ipCidrRouteMetric2 is, by definition, a secondary routing
-+-- metric. Therefore, it should be the metric that breaks a tie
-+-- among routes having equal metric1 values and the same
-+-- calculation rule. For intra-area, inter-area routes, and
-+-- External Type 1 (comparable value) routes, it is unused. For
-+-- external Type 2 (non-comparable value) routes, it is the metric
-+-- to the AS border router.
-+
-+-- ipCidrRouteMetric3, ipCidrRouteMetric4, and ipCidrRouteMetric5 are
-+-- unused.
-+
-+--
-+-- The OSPF Area Aggregate Table
-+--
-+-- This table replaces the OSPF Area Summary Table, being an
-+-- extension of that for CIDR routers.
-+
-+ ospfAreaAggregateTable OBJECT-TYPE
-+ SYNTAX SEQUENCE OF OspfAreaAggregateEntry
-+ MAX-ACCESS not-accessible
-+ STATUS current
-+ DESCRIPTION
-+ "A range of IP addresses specified by an IP
-+ address/IP network mask pair. For example,
-+ class B address range of X.X.X.X with a network
-+ mask of 255.255.0.0 includes all IP addresses
-+ from X.X.0.0 to X.X.255.255. Note that if
-+ ranges are configured such that one range sub-
-+ sumes another range (e.g., 10.0.0.0 mask
-+ 255.0.0.0 and 10.1.0.0 mask 255.255.0.0), the
-+ most specific match is the preferred one."
-+ REFERENCE
-+ "OSPF Version 2, Appendix C.2 Area parameters"
-+ ::= { ospf 14 }
-+
-+
-+ ospfAreaAggregateEntry OBJECT-TYPE
-+ SYNTAX OspfAreaAggregateEntry
-+ MAX-ACCESS not-accessible
-+ STATUS current
-+ DESCRIPTION
-+ "A range of IP addresses specified by an IP
-+ address/IP network mask pair. For example,
-+ class B address range of X.X.X.X with a network
-+ mask of 255.255.0.0 includes all IP addresses
-+ from X.X.0.0 to X.X.255.255. Note that if
-+ ranges are range configured such that one range
-+ subsumes another range (e.g., 10.0.0.0 mask
-+ 255.0.0.0 and 10.1.0.0 mask 255.255.0.0), the
-+ most specific match is the preferred one."
-+ REFERENCE
-+ "OSPF Version 2, Appendix C.2 Area parameters"
-+ INDEX { ospfAreaAggregateAreaID, ospfAreaAggregateLsdbType,
-+ ospfAreaAggregateNet, ospfAreaAggregateMask }
-+ ::= { ospfAreaAggregateTable 1 }
-+
-+
-+OspfAreaAggregateEntry ::=
-+ SEQUENCE {
-+ ospfAreaAggregateAreaID
-+ AreaID,
-+ ospfAreaAggregateLsdbType
-+ INTEGER,
-+ ospfAreaAggregateNet
-+ IpAddress,
-+ ospfAreaAggregateMask
-+ IpAddress,
-+ ospfAreaAggregateStatus
-+ RowStatus,
-+ ospfAreaAggregateEffect
-+ INTEGER
-+ }
-+
-+ ospfAreaAggregateAreaID OBJECT-TYPE
-+ SYNTAX AreaID
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "The Area the Address Aggregate is to be found
-+ within."
-+ REFERENCE
-+ "OSPF Version 2, Appendix C.2 Area parameters"
-+ ::= { ospfAreaAggregateEntry 1 }
-+
-+
-+ ospfAreaAggregateLsdbType OBJECT-TYPE
-+ SYNTAX INTEGER {
-+ summaryLink (3),
-+ nssaExternalLink (7)
-+ }
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "The type of the Address Aggregate. This field
-+ specifies the Lsdb type that this Address Ag-
-+ gregate applies to."
-+ REFERENCE
-+ "OSPF Version 2, Appendix A.4.1 The Link State
-+ Advertisement header"
-+ ::= { ospfAreaAggregateEntry 2 }
-+
-+
-+ ospfAreaAggregateNet OBJECT-TYPE
-+ SYNTAX IpAddress
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "The IP Address of the Net or Subnet indicated
-+ by the range."
-+ REFERENCE
-+ "OSPF Version 2, Appendix C.2 Area parameters"
-+ ::= { ospfAreaAggregateEntry 3 }
-+
-+
-+ ospfAreaAggregateMask OBJECT-TYPE
-+ SYNTAX IpAddress
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "The Subnet Mask that pertains to the Net or
-+ Subnet."
-+ REFERENCE
-+ "OSPF Version 2, Appendix C.2 Area parameters"
-+ ::= { ospfAreaAggregateEntry 4 }
-+
-+
-+ ospfAreaAggregateStatus OBJECT-TYPE
-+ SYNTAX RowStatus
-+ MAX-ACCESS read-create
-+ STATUS current
-+ DESCRIPTION
-+ "This variable displays the status of the en-
-+ try. Setting it to 'invalid' has the effect of
-+ rendering it inoperative. The internal effect
-+ (row removal) is implementation dependent."
-+ ::= { ospfAreaAggregateEntry 5 }
-+
-+
-+ ospfAreaAggregateEffect OBJECT-TYPE
-+ SYNTAX INTEGER {
-+ advertiseMatching (1),
-+ doNotAdvertiseMatching (2)
-+ }
-+ MAX-ACCESS read-create
-+ STATUS current
-+ DESCRIPTION
-+ "Subnets subsumed by ranges either trigger the
-+ advertisement of the indicated aggregate (ad-
-+ vertiseMatching), or result in the subnet's not
-+ being advertised at all outside the area."
-+ DEFVAL { advertiseMatching }
-+ ::= { ospfAreaAggregateEntry 6 }
-+
-+
-+-- conformance information
-+
-+ospfConformance OBJECT IDENTIFIER ::= { ospf 15 }
-+
-+ospfGroups OBJECT IDENTIFIER ::= { ospfConformance 1 }
-+ospfCompliances OBJECT IDENTIFIER ::= { ospfConformance 2 }
-+
-+-- compliance statements
-+
-+ ospfCompliance MODULE-COMPLIANCE
-+ STATUS current
-+ DESCRIPTION
-+ "The compliance statement "
-+ MODULE -- this module
-+ MANDATORY-GROUPS {
-+ ospfBasicGroup,
-+ ospfAreaGroup,
-+ ospfStubAreaGroup,
-+ ospfIfGroup,
-+ ospfIfMetricGroup,
-+ ospfVirtIfGroup,
-+ ospfNbrGroup,
-+ ospfVirtNbrGroup,
-+ ospfAreaAggregateGroup
-+ }
-+ ::= { ospfCompliances 1 }
-+
-+
-+-- units of conformance
-+
-+ ospfBasicGroup OBJECT-GROUP
-+ OBJECTS {
-+ ospfRouterId,
-+ ospfAdminStat,
-+ ospfVersionNumber,
-+ ospfAreaBdrRtrStatus,
-+ ospfASBdrRtrStatus,
-+ ospfExternLsaCount,
-+ ospfExternLsaCksumSum,
-+ ospfTOSSupport,
-+ ospfOriginateNewLsas,
-+ ospfRxNewLsas,
-+ ospfExtLsdbLimit,
-+ ospfMulticastExtensions,
-+ ospfExitOverflowInterval,
-+ ospfDemandExtensions
-+ }
-+ STATUS current
-+ DESCRIPTION
-+ "These objects are required for OSPF systems."
-+ ::= { ospfGroups 1 }
-+
-+
-+ ospfAreaGroup OBJECT-GROUP
-+ OBJECTS {
-+ ospfAreaId,
-+ ospfImportAsExtern,
-+ ospfSpfRuns,
-+ ospfAreaBdrRtrCount,
-+ ospfAsBdrRtrCount,
-+ ospfAreaLsaCount,
-+ ospfAreaLsaCksumSum,
-+ ospfAreaSummary,
-+ ospfAreaStatus
-+ }
-+ STATUS current
-+ DESCRIPTION
-+ "These objects are required for OSPF systems
-+ supporting areas."
-+ ::= { ospfGroups 2 }
-+
-+
-+ ospfStubAreaGroup OBJECT-GROUP
-+ OBJECTS {
-+ ospfStubAreaId,
-+ ospfStubTOS,
-+ ospfStubMetric,
-+ ospfStubStatus,
-+ ospfStubMetricType
-+ }
-+ STATUS current
-+ DESCRIPTION
-+ "These objects are required for OSPF systems
-+ supporting stub areas."
-+ ::= { ospfGroups 3 }
-+
-+
-+ ospfLsdbGroup OBJECT-GROUP
-+ OBJECTS {
-+ ospfLsdbAreaId,
-+ ospfLsdbType,
-+ ospfLsdbLsid,
-+ ospfLsdbRouterId,
-+ ospfLsdbSequence,
-+ ospfLsdbAge,
-+ ospfLsdbChecksum,
-+ ospfLsdbAdvertisement
-+ }
-+ STATUS current
-+ DESCRIPTION
-+ "These objects are required for OSPF systems
-+ that display their link state database."
-+ ::= { ospfGroups 4 }
-+
-+
-+ ospfAreaRangeGroup OBJECT-GROUP
-+ OBJECTS {
-+ ospfAreaRangeAreaId,
-+ ospfAreaRangeNet,
-+ ospfAreaRangeMask,
-+ ospfAreaRangeStatus,
-+ ospfAreaRangeEffect
-+ }
-+ STATUS obsolete
-+ DESCRIPTION
-+ "These objects are required for non-CIDR OSPF
-+ systems that support multiple areas."
-+ ::= { ospfGroups 5 }
-+
-+
-+ ospfHostGroup OBJECT-GROUP
-+ OBJECTS {
-+ ospfHostIpAddress,
-+ ospfHostTOS,
-+ ospfHostMetric,
-+ ospfHostStatus,
-+ ospfHostAreaID
-+ }
-+ STATUS current
-+ DESCRIPTION
-+ "These objects are required for OSPF systems
-+ that support attached hosts."
-+ ::= { ospfGroups 6 }
-+
-+
-+ ospfIfGroup OBJECT-GROUP
-+ OBJECTS {
-+ ospfIfIpAddress,
-+ ospfAddressLessIf,
-+ ospfIfAreaId,
-+ ospfIfType,
-+ ospfIfAdminStat,
-+ ospfIfRtrPriority,
-+ ospfIfTransitDelay,
-+ ospfIfRetransInterval,
-+ ospfIfHelloInterval,
-+ ospfIfRtrDeadInterval,
-+ ospfIfPollInterval,
-+ ospfIfState,
-+ ospfIfDesignatedRouter,
-+ ospfIfBackupDesignatedRouter,
-+ ospfIfEvents,
-+ ospfIfAuthType,
-+ ospfIfAuthKey,
-+ ospfIfStatus,
-+ ospfIfMulticastForwarding,
-+ ospfIfDemand
-+ }
-+ STATUS current
-+ DESCRIPTION
-+ "These objects are required for OSPF systems."
-+ ::= { ospfGroups 7 }
-+
-+
-+ ospfIfMetricGroup OBJECT-GROUP
-+ OBJECTS {
-+ ospfIfMetricIpAddress,
-+ ospfIfMetricAddressLessIf,
-+ ospfIfMetricTOS,
-+ ospfIfMetricValue,
-+ ospfIfMetricStatus
-+ }
-+ STATUS current
-+ DESCRIPTION
-+ "These objects are required for OSPF systems."
-+ ::= { ospfGroups 8 }
-+
-+
-+ ospfVirtIfGroup OBJECT-GROUP
-+ OBJECTS {
-+ ospfVirtIfAreaId,
-+ ospfVirtIfNeighbor,
-+ ospfVirtIfTransitDelay,
-+ ospfVirtIfRetransInterval,
-+ ospfVirtIfHelloInterval,
-+ ospfVirtIfRtrDeadInterval,
-+ ospfVirtIfState,
-+ ospfVirtIfEvents,
-+ ospfVirtIfAuthType,
-+ ospfVirtIfAuthKey,
-+ ospfVirtIfStatus
-+ }
-+ STATUS current
-+ DESCRIPTION
-+ "These objects are required for OSPF systems."
-+ ::= { ospfGroups 9 }
-+
-+
-+ ospfNbrGroup OBJECT-GROUP
-+ OBJECTS {
-+ ospfNbrIpAddr,
-+ ospfNbrAddressLessIndex,
-+ ospfNbrRtrId,
-+ ospfNbrOptions,
-+ ospfNbrPriority,
-+ ospfNbrState,
-+ ospfNbrEvents,
-+ ospfNbrLsRetransQLen,
-+ ospfNbmaNbrStatus,
-+ ospfNbmaNbrPermanence,
-+ ospfNbrHelloSuppressed
-+ }
-+ STATUS current
-+ DESCRIPTION
-+ "These objects are required for OSPF systems."
-+ ::= { ospfGroups 10 }
-+
-+
-+ ospfVirtNbrGroup OBJECT-GROUP
-+ OBJECTS {
-+ ospfVirtNbrArea,
-+ ospfVirtNbrRtrId,
-+ ospfVirtNbrIpAddr,
-+ ospfVirtNbrOptions,
-+ ospfVirtNbrState,
-+ ospfVirtNbrEvents,
-+ ospfVirtNbrLsRetransQLen,
-+ ospfVirtNbrHelloSuppressed
-+ }
-+ STATUS current
-+ DESCRIPTION
-+ "These objects are required for OSPF systems."
-+ ::= { ospfGroups 11 }
-+
-+
-+ ospfExtLsdbGroup OBJECT-GROUP
-+ OBJECTS {
-+ ospfExtLsdbType,
-+ ospfExtLsdbLsid,
-+ ospfExtLsdbRouterId,
-+ ospfExtLsdbSequence,
-+ ospfExtLsdbAge,
-+ ospfExtLsdbChecksum,
-+ ospfExtLsdbAdvertisement
-+ }
-+ STATUS current
-+ DESCRIPTION
-+ "These objects are required for OSPF systems
-+ that display their link state database."
-+ ::= { ospfGroups 12 }
-+
-+
-+ ospfAreaAggregateGroup OBJECT-GROUP
-+ OBJECTS {
-+ ospfAreaAggregateAreaID,
-+ ospfAreaAggregateLsdbType,
-+ ospfAreaAggregateNet,
-+ ospfAreaAggregateMask,
-+ ospfAreaAggregateStatus,
-+ ospfAreaAggregateEffect
-+ }
-+ STATUS current
-+ DESCRIPTION
-+ "These objects are required for OSPF systems."
-+ ::= { ospfGroups 13 }
-+
-+END
-diff -ruN net-snmp-5.4.1.orig/mibs/OSPF-TRAP-MIB.txt net-snmp-5.4.1/mibs/OSPF-TRAP-MIB.txt
---- net-snmp-5.4.1.orig/mibs/OSPF-TRAP-MIB.txt 1970-01-01 01:00:00.000000000 +0100
-+++ net-snmp-5.4.1/mibs/OSPF-TRAP-MIB.txt 2007-09-20 16:30:52.000000000 +0200
-@@ -0,0 +1,443 @@
-+OSPF-TRAP-MIB DEFINITIONS ::= BEGIN
-+
-+ IMPORTS
-+ MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE, IpAddress
-+ FROM SNMPv2-SMI
-+ MODULE-COMPLIANCE, OBJECT-GROUP
-+ FROM SNMPv2-CONF
-+ ospfRouterId, ospfIfIpAddress, ospfAddressLessIf, ospfIfState,
-+ ospfVirtIfAreaId, ospfVirtIfNeighbor, ospfVirtIfState,
-+ ospfNbrIpAddr, ospfNbrAddressLessIndex, ospfNbrRtrId,
-+ ospfNbrState, ospfVirtNbrArea, ospfVirtNbrRtrId, ospfVirtNbrState,
-+ ospfLsdbType, ospfLsdbLsid, ospfLsdbRouterId, ospfLsdbAreaId,
-+ ospfExtLsdbLimit, ospf
-+ FROM OSPF-MIB;
-+
-+ ospfTrap MODULE-IDENTITY
-+ LAST-UPDATED "9501201225Z" -- Fri Jan 20 12:25:50 PST 1995
-+ ORGANIZATION "IETF OSPF Working Group"
-+ CONTACT-INFO
-+ " Fred Baker
-+ Postal: Cisco Systems
-+ 519 Lado Drive
-+ Santa Barbara, California 93111
-+ Tel: +1 805 681 0115
-+ E-Mail: fred at cisco.com
-+
-+ Rob Coltun
-+ Postal: RainbowBridge Communications
-+ Tel: (301) 340-9416
-+ E-Mail: rcoltun at rainbow-bridge.com"
-+ DESCRIPTION
-+ "The MIB module to describe traps for the OSPF
-+ Version 2 Protocol."
-+ ::= { ospf 16 }
-+
-+-- Trap Support Objects
-+
-+-- The following are support objects for the OSPF traps.
-+
-+ospfTrapControl OBJECT IDENTIFIER ::= { ospfTrap 1 }
-+ospfTraps OBJECT IDENTIFIER ::= { ospfTrap 2 }
-+
-+ ospfSetTrap OBJECT-TYPE
-+ SYNTAX OCTET STRING (SIZE(4))
-+ MAX-ACCESS read-write
-+ STATUS current
-+ DESCRIPTION
-+ "A four-octet string serving as a bit map for
-+ the trap events defined by the OSPF traps. This
-+ object is used to enable and disable specific
-+ OSPF traps where a 1 in the bit field
-+ represents enabled. The right-most bit (least
-+ significant) represents trap 0."
-+ ::= { ospfTrapControl 1 }
-+
-+
-+ ospfConfigErrorType OBJECT-TYPE
-+ SYNTAX INTEGER {
-+ badVersion (1),
-+ areaMismatch (2),
-+ unknownNbmaNbr (3), -- Router is Dr eligible
-+ unknownVirtualNbr (4),
-+ authTypeMismatch(5),
-+ authFailure (6),
-+ netMaskMismatch (7),
-+ helloIntervalMismatch (8),
-+ deadIntervalMismatch (9),
-+ optionMismatch (10) }
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "Potential types of configuration conflicts.
-+ Used by the ospfConfigError and ospfConfigVir-
-+ tError traps."
-+ ::= { ospfTrapControl 2 }
-+
-+
-+ ospfPacketType OBJECT-TYPE
-+ SYNTAX INTEGER {
-+ hello (1),
-+ dbDescript (2),
-+ lsReq (3),
-+ lsUpdate (4),
-+ lsAck (5) }
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "OSPF packet types."
-+ ::= { ospfTrapControl 3 }
-+
-+
-+ ospfPacketSrc OBJECT-TYPE
-+ SYNTAX IpAddress
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "The IP address of an inbound packet that can-
-+ not be identified by a neighbor instance."
-+ ::= { ospfTrapControl 4 }
-+
-+
-+-- Traps
-+
-+
-+ ospfIfStateChange NOTIFICATION-TYPE
-+ OBJECTS {
-+ ospfRouterId, -- The originator of the trap
-+ ospfIfIpAddress,
-+ ospfAddressLessIf,
-+ ospfIfState -- The new state
-+ }
-+ STATUS current
-+ DESCRIPTION
-+ "An ospfIfStateChange trap signifies that there
-+ has been a change in the state of a non-virtual
-+ OSPF interface. This trap should be generated
-+ when the interface state regresses (e.g., goes
-+ from Dr to Down) or progresses to a terminal
-+ state (i.e., Point-to-Point, DR Other, Dr, or
-+ Backup)."
-+ ::= { ospfTraps 16 }
-+
-+
-+ ospfVirtIfStateChange NOTIFICATION-TYPE
-+ OBJECTS {
-+ ospfRouterId, -- The originator of the trap
-+ ospfVirtIfAreaId,
-+ ospfVirtIfNeighbor,
-+ ospfVirtIfState -- The new state
-+ }
-+ STATUS current
-+ DESCRIPTION
-+ "An ospfIfStateChange trap signifies that there
-+ has been a change in the state of an OSPF vir-
-+ tual interface.
-+ This trap should be generated when the inter-
-+ face state regresses (e.g., goes from Point-
-+ to-Point to Down) or progresses to a terminal
-+ state (i.e., Point-to-Point)."
-+ ::= { ospfTraps 1 }
-+
-+
-+ ospfNbrStateChange NOTIFICATION-TYPE
-+ OBJECTS {
-+ ospfRouterId, -- The originator of the trap
-+ ospfNbrIpAddr,
-+ ospfNbrAddressLessIndex,
-+ ospfNbrRtrId,
-+ ospfNbrState -- The new state
-+ }
-+ STATUS current
-+ DESCRIPTION
-+ "An ospfNbrStateChange trap signifies that
-+ there has been a change in the state of a non-
-+ virtual OSPF neighbor. This trap should be
-+ generated when the neighbor state regresses
-+ (e.g., goes from Attempt or Full to 1-Way or
-+ Down) or progresses to a terminal state (e.g.,
-+ 2-Way or Full). When an neighbor transitions
-+ from or to Full on non-broadcast multi-access
-+ and broadcast networks, the trap should be gen-
-+ erated by the designated router. A designated
-+ router transitioning to Down will be noted by
-+ ospfIfStateChange."
-+ ::= { ospfTraps 2 }
-+
-+
-+ ospfVirtNbrStateChange NOTIFICATION-TYPE
-+ OBJECTS {
-+ ospfRouterId, -- The originator of the trap
-+ ospfVirtNbrArea,
-+ ospfVirtNbrRtrId,
-+ ospfVirtNbrState -- The new state
-+ }
-+ STATUS current
-+ DESCRIPTION
-+ "An ospfIfStateChange trap signifies that there
-+ has been a change in the state of an OSPF vir-
-+ tual neighbor. This trap should be generated
-+ when the neighbor state regresses (e.g., goes
-+ from Attempt or Full to 1-Way or Down) or
-+ progresses to a terminal state (e.g., Full)."
-+ ::= { ospfTraps 3 }
-+ ospfIfConfigError NOTIFICATION-TYPE
-+ OBJECTS {
-+ ospfRouterId, -- The originator of the trap
-+ ospfIfIpAddress,
-+ ospfAddressLessIf,
-+ ospfPacketSrc, -- The source IP address
-+ ospfConfigErrorType, -- Type of error
-+ ospfPacketType
-+ }
-+ STATUS current
-+ DESCRIPTION
-+ "An ospfIfConfigError trap signifies that a
-+ packet has been received on a non-virtual in-
-+ terface from a router whose configuration
-+ parameters conflict with this router's confi-
-+ guration parameters. Note that the event op-
-+ tionMismatch should cause a trap only if it
-+ prevents an adjacency from forming."
-+ ::= { ospfTraps 4 }
-+
-+
-+ ospfVirtIfConfigError NOTIFICATION-TYPE
-+ OBJECTS {
-+ ospfRouterId, -- The originator of the trap
-+ ospfVirtIfAreaId,
-+ ospfVirtIfNeighbor,
-+ ospfConfigErrorType, -- Type of error
-+ ospfPacketType
-+ }
-+ STATUS current
-+ DESCRIPTION
-+ "An ospfConfigError trap signifies that a pack-
-+ et has been received on a virtual interface
-+ from a router whose configuration parameters
-+ conflict with this router's configuration
-+ parameters. Note that the event optionMismatch
-+ should cause a trap only if it prevents an ad-
-+ jacency from forming."
-+ ::= { ospfTraps 5 }
-+
-+
-+ ospfIfAuthFailure NOTIFICATION-TYPE
-+ OBJECTS {
-+ ospfRouterId, -- The originator of the trap
-+ ospfIfIpAddress,
-+ ospfAddressLessIf,
-+ ospfPacketSrc, -- The source IP address
-+ ospfConfigErrorType, -- authTypeMismatch or
-+ -- authFailure
-+ ospfPacketType
-+ }
-+ STATUS current
-+ DESCRIPTION
-+ "An ospfIfAuthFailure trap signifies that a
-+ packet has been received on a non-virtual in-
-+ terface from a router whose authentication key
-+ or authentication type conflicts with this
-+ router's authentication key or authentication
-+ type."
-+ ::= { ospfTraps 6 }
-+
-+
-+ ospfVirtIfAuthFailure NOTIFICATION-TYPE
-+ OBJECTS {
-+ ospfRouterId, -- The originator of the trap
-+ ospfVirtIfAreaId,
-+ ospfVirtIfNeighbor,
-+ ospfConfigErrorType, -- authTypeMismatch or
-+ -- authFailure
-+ ospfPacketType
-+ }
-+ STATUS current
-+ DESCRIPTION
-+ "An ospfVirtIfAuthFailure trap signifies that a
-+ packet has been received on a virtual interface
-+ from a router whose authentication key or au-
-+ thentication type conflicts with this router's
-+ authentication key or authentication type."
-+ ::= { ospfTraps 7 }
-+
-+
-+ ospfIfRxBadPacket NOTIFICATION-TYPE
-+ OBJECTS {
-+ ospfRouterId, -- The originator of the trap
-+ ospfIfIpAddress,
-+ ospfAddressLessIf,
-+ ospfPacketSrc, -- The source IP address
-+ ospfPacketType
-+ }
-+ STATUS current
-+ DESCRIPTION
-+ "An ospfIfRxBadPacket trap signifies that an
-+ OSPF packet has been received on a non-virtual
-+ interface that cannot be parsed."
-+ ::= { ospfTraps 8 }
-+
-+ ospfVirtIfRxBadPacket NOTIFICATION-TYPE
-+ OBJECTS {
-+ ospfRouterId, -- The originator of the trap
-+ ospfVirtIfAreaId,
-+ ospfVirtIfNeighbor,
-+ ospfPacketType
-+ }
-+ STATUS current
-+ DESCRIPTION
-+ "An ospfRxBadPacket trap signifies that an OSPF
-+ packet has been received on a virtual interface
-+ that cannot be parsed."
-+ ::= { ospfTraps 9 }
-+
-+
-+ ospfTxRetransmit NOTIFICATION-TYPE
-+ OBJECTS {
-+ ospfRouterId, -- The originator of the trap
-+ ospfIfIpAddress,
-+ ospfAddressLessIf,
-+ ospfNbrRtrId, -- Destination
-+ ospfPacketType,
-+ ospfLsdbType,
-+ ospfLsdbLsid,
-+ ospfLsdbRouterId
-+ }
-+ STATUS current
-+ DESCRIPTION
-+ "An ospfTxRetransmit trap signifies than an
-+ OSPF packet has been retransmitted on a non-
-+ virtual interface. All packets that may be re-
-+ transmitted are associated with an LSDB entry.
-+ The LS type, LS ID, and Router ID are used to
-+ identify the LSDB entry."
-+ ::= { ospfTraps 10 }
-+
-+
-+ ospfVirtIfTxRetransmit NOTIFICATION-TYPE
-+ OBJECTS {
-+ ospfRouterId, -- The originator of the trap
-+ ospfVirtIfAreaId,
-+ ospfVirtIfNeighbor,
-+ ospfPacketType,
-+ ospfLsdbType,
-+ ospfLsdbLsid,
-+ ospfLsdbRouterId
-+ }
-+ STATUS current
-+ DESCRIPTION
-+ "An ospfTxRetransmit trap signifies than an
-+ OSPF packet has been retransmitted on a virtual
-+ interface. All packets that may be retransmit-
-+ ted are associated with an LSDB entry. The LS
-+ type, LS ID, and Router ID are used to identify
-+ the LSDB entry."
-+ ::= { ospfTraps 11 }
-+
-+
-+ ospfOriginateLsa NOTIFICATION-TYPE
-+ OBJECTS {
-+ ospfRouterId, -- The originator of the trap
-+ ospfLsdbAreaId, -- 0.0.0.0 for AS Externals
-+ ospfLsdbType,
-+ ospfLsdbLsid,
-+ ospfLsdbRouterId
-+ }
-+ STATUS current
-+ DESCRIPTION
-+ "An ospfOriginateLsa trap signifies that a new
-+ LSA has been originated by this router. This
-+ trap should not be invoked for simple refreshes
-+ of LSAs (which happesn every 30 minutes), but
-+ instead will only be invoked when an LSA is
-+ (re)originated due to a topology change. Addi-
-+ tionally, this trap does not include LSAs that
-+ are being flushed because they have reached
-+ MaxAge."
-+ ::= { ospfTraps 12 }
-+
-+
-+ ospfMaxAgeLsa NOTIFICATION-TYPE
-+ OBJECTS {
-+ ospfRouterId, -- The originator of the trap
-+ ospfLsdbAreaId, -- 0.0.0.0 for AS Externals
-+ ospfLsdbType,
-+ ospfLsdbLsid,
-+ ospfLsdbRouterId
-+ }
-+ STATUS current
-+ DESCRIPTION
-+ "An ospfMaxAgeLsa trap signifies that one of
-+ the LSA in the router's link-state database has
-+ aged to MaxAge."
-+ ::= { ospfTraps 13 }
-+
-+
-+ ospfLsdbOverflow NOTIFICATION-TYPE
-+ OBJECTS {
-+ ospfRouterId, -- The originator of the trap
-+ ospfExtLsdbLimit
-+ }
-+ STATUS current
-+ DESCRIPTION
-+ "An ospfLsdbOverflow trap signifies that the
-+ number of LSAs in the router's link-state data-
-+ base has exceeded ospfExtLsdbLimit."
-+ ::= { ospfTraps 14 }
-+
-+
-+ ospfLsdbApproachingOverflow NOTIFICATION-TYPE
-+ OBJECTS {
-+ ospfRouterId, -- The originator of the trap
-+ ospfExtLsdbLimit
-+ }
-+ STATUS current
-+ DESCRIPTION
-+ "An ospfLsdbApproachingOverflow trap signifies
-+ that the number of LSAs in the router's link-
-+ state database has exceeded ninety percent of
-+ ospfExtLsdbLimit."
-+ ::= { ospfTraps 15 }
-+
-+
-+-- conformance information
-+
-+ospfTrapConformance OBJECT IDENTIFIER ::= { ospfTrap 3 }
-+
-+ospfTrapGroups OBJECT IDENTIFIER ::= { ospfTrapConformance 1 }
-+ospfTrapCompliances OBJECT IDENTIFIER ::= { ospfTrapConformance 2 }
-+
-+-- compliance statements
-+
-+ ospfTrapCompliance MODULE-COMPLIANCE
-+ STATUS current
-+ DESCRIPTION
-+ "The compliance statement "
-+ MODULE -- this module
-+ MANDATORY-GROUPS { ospfTrapControlGroup }
-+
-+
-+ GROUP ospfTrapControlGroup
-+ DESCRIPTION
-+ "This group is optional but recommended for all
-+ OSPF systems"
-+ ::= { ospfTrapCompliances 1 }
-+
-+
-+-- units of conformance
-+
-+ ospfTrapControlGroup OBJECT-GROUP
-+ OBJECTS {
-+ ospfSetTrap,
-+ ospfConfigErrorType,
-+ ospfPacketType,
-+ ospfPacketSrc
-+ }
-+ STATUS current
-+ DESCRIPTION
-+ "These objects are required to control traps
-+ from OSPF systems."
-+ ::= { ospfTrapGroups 1 }
-+
-+
-+END
-diff -ruN net-snmp-5.4.1.orig/mibs/RIPv2-MIB.txt net-snmp-5.4.1/mibs/RIPv2-MIB.txt
---- net-snmp-5.4.1.orig/mibs/RIPv2-MIB.txt 1970-01-01 01:00:00.000000000 +0100
-+++ net-snmp-5.4.1/mibs/RIPv2-MIB.txt 2007-09-20 16:30:52.000000000 +0200
-@@ -0,0 +1,530 @@
-+ RIPv2-MIB DEFINITIONS ::= BEGIN
-+
-+ IMPORTS
-+ MODULE-IDENTITY, OBJECT-TYPE, Counter32,
-+ TimeTicks, IpAddress FROM SNMPv2-SMI
-+ TEXTUAL-CONVENTION, RowStatus FROM SNMPv2-TC
-+ MODULE-COMPLIANCE, OBJECT-GROUP FROM SNMPv2-CONF
-+ mib-2 FROM RFC1213-MIB;
-+
-+ -- This MIB module uses the extended OBJECT-TYPE macro as
-+ -- defined in [9].
-+
-+ rip2 MODULE-IDENTITY
-+ LAST-UPDATED "9407272253Z" -- Wed Jul 27 22:53:04 PDT 1994
-+ ORGANIZATION "IETF RIP-II Working Group"
-+ CONTACT-INFO
-+ " Fred Baker
-+ Postal: Cisco Systems
-+ 519 Lado Drive
-+ Santa Barbara, California 93111
-+ Tel: +1 805 681 0115
-+ E-Mail: fbaker at cisco.com
-+
-+ Postal: Gary Malkin
-+ Xylogics, Inc.
-+ 53 Third Avenue
-+ Burlington, MA 01803
-+
-+ Phone: (617) 272-8140
-+ EMail: gmalkin at Xylogics.COM"
-+ DESCRIPTION
-+ "The MIB module to describe the RIP2 Version 2 Protocol"
-+ ::= { mib-2 23 }
-+
-+ -- RIP-2 Management Information Base
-+
-+ -- the RouteTag type represents the contents of the
-+ -- Route Domain field in the packet header or route entry.
-+ -- The use of the Route Domain is deprecated.
-+
-+ RouteTag ::= TEXTUAL-CONVENTION
-+ STATUS current
-+ DESCRIPTION
-+ "the RouteTag type represents the contents of the Route Domain
-+ field in the packet header or route entry"
-+ SYNTAX OCTET STRING (SIZE (2))
-+
-+--4.1 Global Counters
-+
-+-- The RIP-2 Globals Group.
-+-- Implementation of this group is mandatory for systems
-+-- which implement RIP-2.
-+
-+-- These counters are intended to facilitate debugging quickly
-+-- changing routes or failing neighbors
-+
-+rip2Globals OBJECT IDENTIFIER ::= { rip2 1 }
-+
-+ rip2GlobalRouteChanges OBJECT-TYPE
-+ SYNTAX Counter32
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "The number of route changes made to the IP Route
-+ Database by RIP. This does not include the refresh
-+ of a route's age."
-+ ::= { rip2Globals 1 }
-+
-+ rip2GlobalQueries OBJECT-TYPE
-+ SYNTAX Counter32
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "The number of responses sent to RIP queries
-+ from other systems."
-+ ::= { rip2Globals 2 }
-+
-+--4.2 RIP Interface Tables
-+
-+-- RIP Interfaces Groups
-+-- Implementation of these Groups is mandatory for systems
-+-- which implement RIP-2.
-+
-+-- The RIP Interface Status Table.
-+
-+ rip2IfStatTable OBJECT-TYPE
-+ SYNTAX SEQUENCE OF Rip2IfStatEntry
-+ MAX-ACCESS not-accessible
-+ STATUS current
-+ DESCRIPTION
-+ "A list of subnets which require separate
-+ status monitoring in RIP."
-+ ::= { rip2 2 }
-+
-+ rip2IfStatEntry OBJECT-TYPE
-+ SYNTAX Rip2IfStatEntry
-+ MAX-ACCESS not-accessible
-+ STATUS current
-+ DESCRIPTION
-+ "A Single Routing Domain in a single Subnet."
-+ INDEX { rip2IfStatAddress }
-+ ::= { rip2IfStatTable 1 }
-+
-+ Rip2IfStatEntry ::=
-+ SEQUENCE {
-+ rip2IfStatAddress
-+ IpAddress,
-+ rip2IfStatRcvBadPackets
-+ Counter32,
-+ rip2IfStatRcvBadRoutes
-+ Counter32,
-+ rip2IfStatSentUpdates
-+ Counter32,
-+ rip2IfStatStatus
-+ RowStatus
-+ }
-+
-+ rip2IfStatAddress OBJECT-TYPE
-+ SYNTAX IpAddress
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "The IP Address of this system on the indicated
-+ subnet. For unnumbered interfaces, the value 0.0.0.N,
-+ where the least significant 24 bits (N) is the ifIndex
-+ for the IP Interface in network byte order."
-+ ::= { rip2IfStatEntry 1 }
-+
-+ rip2IfStatRcvBadPackets OBJECT-TYPE
-+ SYNTAX Counter32
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "The number of RIP response packets received by
-+ the RIP process which were subsequently discarded
-+ for any reason (e.g. a version 0 packet, or an
-+ unknown command type)."
-+ ::= { rip2IfStatEntry 2 }
-+
-+ rip2IfStatRcvBadRoutes OBJECT-TYPE
-+ SYNTAX Counter32
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "The number of routes, in valid RIP packets,
-+ which were ignored for any reason (e.g. unknown
-+ address family, or invalid metric)."
-+ ::= { rip2IfStatEntry 3 }
-+
-+ rip2IfStatSentUpdates OBJECT-TYPE
-+ SYNTAX Counter32
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "The number of triggered RIP updates actually
-+ sent on this interface. This explicitly does
-+ NOT include full updates sent containing new
-+ information."
-+ ::= { rip2IfStatEntry 4 }
-+
-+ rip2IfStatStatus OBJECT-TYPE
-+ SYNTAX RowStatus
-+ MAX-ACCESS read-create
-+ STATUS current
-+ DESCRIPTION
-+ "Writing invalid has the effect of deleting
-+ this interface."
-+ ::= { rip2IfStatEntry 5 }
-+
-+-- The RIP Interface Configuration Table.
-+
-+ rip2IfConfTable OBJECT-TYPE
-+ SYNTAX SEQUENCE OF Rip2IfConfEntry
-+ MAX-ACCESS not-accessible
-+ STATUS current
-+ DESCRIPTION
-+ "A list of subnets which require separate
-+ configuration in RIP."
-+ ::= { rip2 3 }
-+
-+ rip2IfConfEntry OBJECT-TYPE
-+ SYNTAX Rip2IfConfEntry
-+ MAX-ACCESS not-accessible
-+ STATUS current
-+ DESCRIPTION
-+ "A Single Routing Domain in a single Subnet."
-+ INDEX { rip2IfConfAddress }
-+ ::= { rip2IfConfTable 1 }
-+
-+ Rip2IfConfEntry ::=
-+ SEQUENCE {
-+ rip2IfConfAddress
-+ IpAddress,
-+ rip2IfConfDomain
-+ RouteTag,
-+ rip2IfConfAuthType
-+ INTEGER,
-+ rip2IfConfAuthKey
-+ OCTET STRING (SIZE(0..16)),
-+ rip2IfConfSend
-+ INTEGER,
-+ rip2IfConfReceive
-+ INTEGER,
-+ rip2IfConfDefaultMetric
-+ INTEGER,
-+ rip2IfConfStatus
-+ RowStatus,
-+ rip2IfConfSrcAddress
-+ IpAddress
-+ }
-+
-+ rip2IfConfAddress OBJECT-TYPE
-+ SYNTAX IpAddress
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "The IP Address of this system on the indicated
-+ subnet. For unnumbered interfaces, the value 0.0.0.N,
-+ where the least significant 24 bits (N) is the ifIndex
-+ for the IP Interface in network byte order."
-+ ::= { rip2IfConfEntry 1 }
-+
-+ rip2IfConfDomain OBJECT-TYPE
-+ SYNTAX RouteTag
-+ MAX-ACCESS read-create
-+ STATUS obsolete
-+ DESCRIPTION
-+ "Value inserted into the Routing Domain field
-+ of all RIP packets sent on this interface."
-+ DEFVAL { '0000'h }
-+ ::= { rip2IfConfEntry 2 }
-+
-+ rip2IfConfAuthType OBJECT-TYPE
-+ SYNTAX INTEGER {
-+ noAuthentication (1),
-+ simplePassword (2),
-+ md5 (3)
-+ }
-+ MAX-ACCESS read-create
-+ STATUS current
-+ DESCRIPTION
-+ "The type of Authentication used on this
-+ interface."
-+ DEFVAL { noAuthentication }
-+ ::= { rip2IfConfEntry 3 }
-+
-+ rip2IfConfAuthKey OBJECT-TYPE
-+ SYNTAX OCTET STRING (SIZE(0..16))
-+ MAX-ACCESS read-create
-+ STATUS current
-+ DESCRIPTION
-+ "The value to be used as the Authentication Key
-+ whenever the corresponding instance of
-+ rip2IfConfAuthType has a value other than
-+ noAuthentication. A modification of the corresponding
-+ instance of rip2IfConfAuthType does not modify
-+ the rip2IfConfAuthKey value. If a string shorter
-+ than 16 octets is supplied, it will be left-
-+ justified and padded to 16 octets, on the right,
-+ with nulls (0x00).
-+
-+ Reading this object always results in an OCTET
-+ STRING of length zero; authentication may not
-+ be bypassed by reading the MIB object."
-+ DEFVAL { ''h }
-+ ::= { rip2IfConfEntry 4 }
-+
-+ rip2IfConfSend OBJECT-TYPE
-+ SYNTAX INTEGER {
-+ doNotSend (1),
-+ ripVersion1 (2),
-+ rip1Compatible (3),
-+ ripVersion2 (4),
-+ ripV1Demand (5),
-+ ripV2Demand (6)
-+ }
-+ MAX-ACCESS read-create
-+ STATUS current
-+ DESCRIPTION
-+ "What the router sends on this interface.
-+ ripVersion1 implies sending RIP updates compliant
-+ with RFC 1058. rip1Compatible implies
-+ broadcasting RIP-2 updates using RFC 1058 route
-+ subsumption rules. ripVersion2 implies
-+ multicasting RIP-2 updates. ripV1Demand indicates
-+ the use of Demand RIP on a WAN interface under RIP
-+ Version 1 rules. ripV2Demand indicates the use of
-+ Demand RIP on a WAN interface under Version 2 rules."
-+ DEFVAL { rip1Compatible }
-+ ::= { rip2IfConfEntry 5 }
-+
-+ rip2IfConfReceive OBJECT-TYPE
-+ SYNTAX INTEGER {
-+ rip1 (1),
-+ rip2 (2),
-+ rip1OrRip2 (3),
-+ doNotRecieve (4)
-+ }
-+ MAX-ACCESS read-create
-+ STATUS current
-+ DESCRIPTION
-+ "This indicates which version of RIP updates
-+ are to be accepted. Note that rip2 and
-+ rip1OrRip2 implies reception of multicast
-+ packets."
-+ DEFVAL { rip1OrRip2 }
-+ ::= { rip2IfConfEntry 6 }
-+
-+ rip2IfConfDefaultMetric OBJECT-TYPE
-+ SYNTAX INTEGER ( 0..15 )
-+ MAX-ACCESS read-create
-+ STATUS current
-+ DESCRIPTION
-+ "This variable indicates the metric that is to
-+ be used for the default route entry in RIP updates
-+ originated on this interface. A value of zero
-+ indicates that no default route should be
-+ originated; in this case, a default route via
-+ another router may be propagated."
-+ ::= { rip2IfConfEntry 7 }
-+
-+ rip2IfConfStatus OBJECT-TYPE
-+ SYNTAX RowStatus
-+ MAX-ACCESS read-create
-+ STATUS current
-+ DESCRIPTION
-+ "Writing invalid has the effect of deleting
-+ this interface."
-+ ::= { rip2IfConfEntry 8 }
-+
-+ rip2IfConfSrcAddress OBJECT-TYPE
-+ SYNTAX IpAddress
-+ MAX-ACCESS read-create
-+ STATUS current
-+ DESCRIPTION
-+ "The IP Address this system will use as a source
-+ address on this interface. If it is a numbered
-+ interface, this MUST be the same value as
-+ rip2IfConfAddress. On unnumbered interfaces,
-+ it must be the value of rip2IfConfAddress for
-+ some interface on the system."
-+ ::= { rip2IfConfEntry 9 }
-+
-+--4.3 Peer Table
-+
-+-- Peer Table
-+
-+-- The RIP Peer Group
-+-- Implementation of this Group is Optional
-+
-+-- This group provides information about active peer
-+-- relationships intended to assist in debugging. An
-+-- active peer is a router from which a valid RIP
-+-- updated has been heard in the last 180 seconds.
-+
-+ rip2PeerTable OBJECT-TYPE
-+ SYNTAX SEQUENCE OF Rip2PeerEntry
-+ MAX-ACCESS not-accessible
-+ STATUS current
-+ DESCRIPTION
-+ "A list of RIP Peers."
-+ ::= { rip2 4 }
-+
-+ rip2PeerEntry OBJECT-TYPE
-+ SYNTAX Rip2PeerEntry
-+ MAX-ACCESS not-accessible
-+ STATUS current
-+ DESCRIPTION
-+ "Information regarding a single routing peer."
-+ INDEX { rip2PeerAddress, rip2PeerDomain }
-+ ::= { rip2PeerTable 1 }
-+
-+ Rip2PeerEntry ::=
-+ SEQUENCE {
-+ rip2PeerAddress
-+ IpAddress,
-+ rip2PeerDomain
-+ RouteTag,
-+ rip2PeerLastUpdate
-+ TimeTicks,
-+ rip2PeerVersion
-+ INTEGER,
-+ rip2PeerRcvBadPackets
-+ Counter32,
-+ rip2PeerRcvBadRoutes
-+ Counter32
-+ }
-+
-+ rip2PeerAddress OBJECT-TYPE
-+ SYNTAX IpAddress
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "The IP Address that the peer is using as its source
-+ address. Note that on an unnumbered link, this may
-+ not be a member of any subnet on the system."
-+ ::= { rip2PeerEntry 1 }
-+
-+ rip2PeerDomain OBJECT-TYPE
-+ SYNTAX RouteTag
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "The value in the Routing Domain field in RIP
-+ packets received from the peer. As domain suuport
-+ is deprecated, this must be zero."
-+ ::= { rip2PeerEntry 2 }
-+
-+ rip2PeerLastUpdate OBJECT-TYPE
-+ SYNTAX TimeTicks
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "The value of sysUpTime when the most recent
-+ RIP update was received from this system."
-+ ::= { rip2PeerEntry 3 }
-+
-+ rip2PeerVersion OBJECT-TYPE
-+ SYNTAX INTEGER ( 0..255 )
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "The RIP version number in the header of the
-+ last RIP packet received."
-+ ::= { rip2PeerEntry 4 }
-+
-+ rip2PeerRcvBadPackets OBJECT-TYPE
-+ SYNTAX Counter32
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "The number of RIP response packets from this
-+ peer discarded as invalid."
-+ ::= { rip2PeerEntry 5 }
-+
-+
-+ rip2PeerRcvBadRoutes OBJECT-TYPE
-+ SYNTAX Counter32
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "The number of routes from this peer that were
-+ ignored because the entry format was invalid."
-+ ::= { rip2PeerEntry 6 }
-+
-+-- conformance information
-+
-+rip2Conformance OBJECT IDENTIFIER ::= { rip2 5 }
-+
-+rip2Groups OBJECT IDENTIFIER ::= { rip2Conformance 1 }
-+rip2Compliances OBJECT IDENTIFIER ::= { rip2Conformance 2 }
-+
-+-- compliance statements
-+rip2Compliance MODULE-COMPLIANCE
-+ STATUS current
-+ DESCRIPTION
-+ "The compliance statement "
-+ MODULE -- this module
-+ MANDATORY-GROUPS {
-+ rip2GlobalGroup,
-+ rip2IfStatGroup,
-+ rip2IfConfGroup,
-+ rip2PeerGroup
-+ }
-+ GROUP rip2GlobalGroup
-+ DESCRIPTION
-+ "This group defines global controls for RIP-II systems."
-+ GROUP rip2IfStatGroup
-+ DESCRIPTION
-+ "This group defines interface statistics for RIP-II systems."
-+ GROUP rip2IfConfGroup
-+ DESCRIPTION
-+ "This group defines interface configuration for RIP-II systems."
-+ GROUP rip2PeerGroup
-+ DESCRIPTION
-+ "This group defines peer information for RIP-II systems."
-+ ::= { rip2Compliances 1 }
-+
-+-- units of conformance
-+
-+rip2GlobalGroup OBJECT-GROUP
-+ OBJECTS {
-+ rip2GlobalRouteChanges,
-+ rip2GlobalQueries
-+ }
-+ STATUS current
-+ DESCRIPTION
-+ "This group defines global controls for RIP-II systems."
-+ ::= { rip2Groups 1 }
-+rip2IfStatGroup OBJECT-GROUP
-+ OBJECTS {
-+ rip2IfStatAddress,
-+ rip2IfStatRcvBadPackets,
-+ rip2IfStatRcvBadRoutes,
-+ rip2IfStatSentUpdates,
-+ rip2IfStatStatus
-+ }
-+ STATUS current
-+ DESCRIPTION
-+ "This group defines interface statistics for RIP-II systems."
-+ ::= { rip2Groups 2 }
-+rip2IfConfGroup OBJECT-GROUP
-+ OBJECTS {
-+ rip2IfConfAddress,
-+ rip2IfConfAuthType,
-+ rip2IfConfAuthKey,
-+ rip2IfConfSend,
-+ rip2IfConfReceive,
-+ rip2IfConfDefaultMetric,
-+ rip2IfConfStatus,
-+ rip2IfConfSrcAddress
-+ }
-+ STATUS current
-+ DESCRIPTION
-+ "This group defines interface configuration for RIP-II systems."
-+ ::= { rip2Groups 3 }
-+rip2PeerGroup OBJECT-GROUP
-+ OBJECTS {
-+ rip2PeerAddress,
-+ rip2PeerDomain,
-+ rip2PeerLastUpdate,
-+ rip2PeerVersion,
-+ rip2PeerRcvBadPackets,
-+ rip2PeerRcvBadRoutes
-+ }
-+ STATUS current
-+ DESCRIPTION
-+ "This group defines peer information for RIP-II systems."
-+ ::= { rip2Groups 4 }
-+END
-diff -ruN net-snmp-5.4.1.orig/mibs/SOURCE-ROUTING-MIB.txt net-snmp-5.4.1/mibs/SOURCE-ROUTING-MIB.txt
---- net-snmp-5.4.1.orig/mibs/SOURCE-ROUTING-MIB.txt 1970-01-01 01:00:00.000000000 +0100
-+++ net-snmp-5.4.1/mibs/SOURCE-ROUTING-MIB.txt 2007-09-20 16:30:52.000000000 +0200
-@@ -0,0 +1,452 @@
-+SOURCE-ROUTING-MIB DEFINITIONS ::= BEGIN
-+
-+IMPORTS
-+ Counter, Gauge
-+ FROM RFC1155-SMI
-+ dot1dBridge, dot1dSr
-+ FROM BRIDGE-MIB
-+ OBJECT-TYPE
-+ FROM RFC-1212;
-+
-+-- groups in the SR MIB
-+
-+-- dot1dSr is imported from the Bridge MIB
-+
-+dot1dPortPair OBJECT IDENTIFIER ::= { dot1dBridge 10 }
-+
-+-- the dot1dSr group
-+
-+-- this group is implemented by those bridges that
-+-- support the source route bridging mode, including Source
-+-- Routing and SRT bridges.
-+
-+dot1dSrPortTable OBJECT-TYPE
-+ SYNTAX SEQUENCE OF Dot1dSrPortEntry
-+ ACCESS not-accessible
-+ STATUS mandatory
-+ DESCRIPTION
-+ "A table that contains information about every
-+ port that is associated with this source route
-+ bridge."
-+ ::= { dot1dSr 1 }
-+
-+dot1dSrPortEntry OBJECT-TYPE
-+ SYNTAX Dot1dSrPortEntry
-+ ACCESS not-accessible
-+ STATUS mandatory
-+ DESCRIPTION
-+ "A list of information for each port of a source
-+ route bridge."
-+ INDEX { dot1dSrPort }
-+
-+ ::= { dot1dSrPortTable 1 }
-+
-+Dot1dSrPortEntry ::=
-+ SEQUENCE {
-+ dot1dSrPort
-+ INTEGER,
-+ dot1dSrPortHopCount
-+ INTEGER,
-+ dot1dSrPortLocalSegment
-+ INTEGER,
-+ dot1dSrPortBridgeNum
-+ INTEGER,
-+ dot1dSrPortTargetSegment
-+ INTEGER,
-+ dot1dSrPortLargestFrame
-+ INTEGER,
-+ dot1dSrPortSTESpanMode
-+ INTEGER,
-+ dot1dSrPortSpecInFrames
-+ Counter,
-+ dot1dSrPortSpecOutFrames
-+ Counter,
-+ dot1dSrPortApeInFrames
-+ Counter,
-+ dot1dSrPortApeOutFrames
-+ Counter,
-+ dot1dSrPortSteInFrames
-+ Counter,
-+ dot1dSrPortSteOutFrames
-+ Counter,
-+ dot1dSrPortSegmentMismatchDiscards
-+ Counter,
-+ dot1dSrPortDuplicateSegmentDiscards
-+ Counter,
-+ dot1dSrPortHopCountExceededDiscards
-+ Counter,
-+ dot1dSrPortDupLanIdOrTreeErrors
-+ Counter,
-+ dot1dSrPortLanIdMismatches
-+ Counter
-+ }
-+
-+dot1dSrPort OBJECT-TYPE
-+ SYNTAX INTEGER (1..65535)
-+ ACCESS read-only
-+ STATUS mandatory
-+ DESCRIPTION
-+ "The port number of the port for which this entry
-+
-+ contains Source Route management information."
-+ ::= { dot1dSrPortEntry 1 }
-+
-+dot1dSrPortHopCount OBJECT-TYPE
-+ SYNTAX INTEGER
-+ ACCESS read-write
-+ STATUS mandatory
-+ DESCRIPTION
-+ "The maximum number of routing descriptors allowed
-+ in an All Paths or Spanning Tree Explorer frames."
-+ ::= { dot1dSrPortEntry 2 }
-+
-+dot1dSrPortLocalSegment OBJECT-TYPE
-+ SYNTAX INTEGER
-+ ACCESS read-write
-+ STATUS mandatory
-+ DESCRIPTION
-+ "The segment number that uniquely identifies the
-+ segment to which this port is connected. Current
-+ source routing protocols limit this value to the
-+ range: 0 through 4095. (The value 0 is used by
-+ some management applications for special test
-+ cases.) A value of 65535 signifies that no segment
-+ number is assigned to this port."
-+ ::= { dot1dSrPortEntry 3 }
-+
-+dot1dSrPortBridgeNum OBJECT-TYPE
-+ SYNTAX INTEGER
-+ ACCESS read-write
-+ STATUS mandatory
-+ DESCRIPTION
-+ "A bridge number uniquely identifies a bridge when
-+ more than one bridge is used to span the same two
-+ segments. Current source routing protocols limit
-+ this value to the range: 0 through 15. A value of
-+ 65535 signifies that no bridge number is assigned
-+ to this bridge."
-+ ::= { dot1dSrPortEntry 4 }
-+
-+dot1dSrPortTargetSegment OBJECT-TYPE
-+ SYNTAX INTEGER
-+ ACCESS read-write
-+ STATUS mandatory
-+ DESCRIPTION
-+ "The segment number that corresponds to the target
-+ segment this port is considered to be connected to
-+ by the bridge. Current source routing protocols
-+ limit this value to the range: 0 through 4095.
-+
-+ (The value 0 is used by some management
-+ applications for special test cases.) A value of
-+ 65535 signifies that no target segment is assigned
-+ to this port."
-+ ::= { dot1dSrPortEntry 5 }
-+
-+-- It would be nice if we could use ifMtu as the size of the
-+-- largest frame, but we can't because ifMtu is defined to be
-+-- the size that the (inter-)network layer can use which can
-+-- differ from the MAC layer (especially if several layers of
-+-- encapsulation are used).
-+
-+dot1dSrPortLargestFrame OBJECT-TYPE
-+ SYNTAX INTEGER
-+ ACCESS read-write
-+ STATUS mandatory
-+ DESCRIPTION
-+ "The maximum size of the INFO field (LLC and
-+ above) that this port can send/receive. It does
-+ not include any MAC level (framing) octets. The
-+ value of this object is used by this bridge to
-+ determine whether a modification of the
-+ LargestFrame (LF, see [14]) field of the Routing
-+ Control field of the Routing Information Field is
-+ necessary.
-+
-+ 64 valid values are defined by the IEEE 802.5M SRT
-+ Addendum: 516, 635, 754, 873, 993, 1112, 1231,
-+ 1350, 1470, 1542, 1615, 1688, 1761, 1833, 1906,
-+ 1979, 2052, 2345, 2638, 2932, 3225, 3518, 3812,
-+ 4105, 4399, 4865, 5331, 5798, 6264, 6730, 7197,
-+ 7663, 8130, 8539, 8949, 9358, 9768, 10178, 10587,
-+ 10997, 11407, 12199, 12992, 13785, 14578, 15370,
-+ 16163, 16956, 17749, 20730, 23711, 26693, 29674,
-+ 32655, 35637, 38618, 41600, 44591, 47583, 50575,
-+ 53567, 56559, 59551, and 65535.
-+
-+ An illegal value will not be accepted by the
-+ bridge."
-+ ::= { dot1dSrPortEntry 6 }
-+
-+dot1dSrPortSTESpanMode OBJECT-TYPE
-+ SYNTAX INTEGER {
-+ auto-span(1),
-+ disabled(2),
-+ forced(3)
-+ }
-+ ACCESS read-write
-+ STATUS mandatory
-+ DESCRIPTION
-+ "Determines how this port behaves when presented
-+ with a Spanning Tree Explorer frame. The value
-+ 'disabled(2)' indicates that the port will not
-+ accept or send Spanning Tree Explorer packets; any
-+ STE packets received will be silently discarded.
-+ The value 'forced(3)' indicates the port will
-+ always accept and propagate Spanning Tree Explorer
-+ frames. This allows a manually configured
-+ Spanning Tree for this class of packet to be
-+ configured. Note that unlike transparent
-+ bridging, this is not catastrophic to the network
-+ if there are loops. The value 'auto-span(1)' can
-+ only be returned by a bridge that both implements
-+ the Spanning Tree Protocol and has use of the
-+ protocol enabled on this port. The behavior of the
-+ port for Spanning Tree Explorer frames is
-+ determined by the state of dot1dStpPortState. If
-+ the port is in the 'forwarding' state, the frame
-+ will be accepted or propagated. Otherwise, it
-+ will be silently discarded."
-+ ::= { dot1dSrPortEntry 7 }
-+
-+dot1dSrPortSpecInFrames OBJECT-TYPE
-+ SYNTAX Counter
-+ ACCESS read-only
-+ STATUS mandatory
-+ DESCRIPTION
-+ "The number of Specifically Routed frames, also
-+ referred to as Source Routed Frames, that have
-+ been received from this port's segment."
-+ ::= { dot1dSrPortEntry 8 }
-+
-+dot1dSrPortSpecOutFrames OBJECT-TYPE
-+ SYNTAX Counter
-+ ACCESS read-only
-+ STATUS mandatory
-+ DESCRIPTION
-+ "The number of Specifically Routed frames, also
-+ referred to as Source Routed Frames, that this
-+ port has transmitted on its segment."
-+ ::= { dot1dSrPortEntry 9 }
-+
-+dot1dSrPortApeInFrames OBJECT-TYPE
-+ SYNTAX Counter
-+ ACCESS read-only
-+ STATUS mandatory
-+ DESCRIPTION
-+ "The number of All Paths Explorer frames, also
-+ referred to as All Routes Explorer frames, that
-+ have been received by this port from its segment."
-+ ::= { dot1dSrPortEntry 10 }
-+
-+dot1dSrPortApeOutFrames OBJECT-TYPE
-+ SYNTAX Counter
-+ ACCESS read-only
-+ STATUS mandatory
-+ DESCRIPTION
-+ "The number of all Paths Explorer Frames, also
-+ referred to as All Routes Explorer frames, that
-+ have been transmitted by this port on its
-+ segment."
-+ ::= { dot1dSrPortEntry 11 }
-+
-+dot1dSrPortSteInFrames OBJECT-TYPE
-+ SYNTAX Counter
-+ ACCESS read-only
-+ STATUS mandatory
-+ DESCRIPTION
-+ "The number of spanning tree explorer frames that
-+ have been received by this port from its segment."
-+ ::= { dot1dSrPortEntry 12 }
-+
-+dot1dSrPortSteOutFrames OBJECT-TYPE
-+ SYNTAX Counter
-+ ACCESS read-only
-+ STATUS mandatory
-+ DESCRIPTION
-+ "The number of spanning tree explorer frames that
-+ have been transmitted by this port on its
-+ segment."
-+ ::= { dot1dSrPortEntry 13 }
-+
-+dot1dSrPortSegmentMismatchDiscards OBJECT-TYPE
-+ SYNTAX Counter
-+ ACCESS read-only
-+ STATUS mandatory
-+ DESCRIPTION
-+ "The number of explorer frames that have been
-+ discarded by this port because the routing
-+ descriptor field contained an invalid adjacent
-+ segment value."
-+ ::= { dot1dSrPortEntry 14 }
-+
-+dot1dSrPortDuplicateSegmentDiscards OBJECT-TYPE
-+ SYNTAX Counter
-+ ACCESS read-only
-+ STATUS mandatory
-+ DESCRIPTION
-+ "The number of frames that have been discarded by
-+ this port because the routing descriptor field
-+ contained a duplicate segment identifier."
-+ ::= { dot1dSrPortEntry 15 }
-+
-+dot1dSrPortHopCountExceededDiscards OBJECT-TYPE
-+ SYNTAX Counter
-+ ACCESS read-only
-+ STATUS mandatory
-+ DESCRIPTION
-+ "The number of explorer frames that have been
-+ discarded by this port because the Routing
-+ Information Field has exceeded the maximum route
-+ descriptor length."
-+ ::= { dot1dSrPortEntry 16 }
-+
-+dot1dSrPortDupLanIdOrTreeErrors OBJECT-TYPE
-+ SYNTAX Counter
-+ ACCESS read-only
-+ STATUS mandatory
-+ DESCRIPTION
-+ "The number of duplicate LAN IDs or Tree errors.
-+ This helps in detection of problems in networks
-+ containing older IBM Source Routing Bridges."
-+ ::= { dot1dSrPortEntry 17 }
-+
-+dot1dSrPortLanIdMismatches OBJECT-TYPE
-+ SYNTAX Counter
-+ ACCESS read-only
-+ STATUS mandatory
-+ DESCRIPTION
-+ "The number of ARE and STE frames that were
-+ discarded because the last LAN ID in the routing
-+ information field did not equal the LAN-in ID.
-+ This error can occur in implementations which do
-+ only a LAN-in ID and Bridge Number check instead
-+ of a LAN-in ID, Bridge Number, and LAN-out ID
-+ check before they forward broadcast frames."
-+ ::= { dot1dSrPortEntry 18 }
-+
-+-- scalar object in dot1dSr
-+
-+dot1dSrBridgeLfMode OBJECT-TYPE
-+ SYNTAX INTEGER {
-+ mode3(1),
-+ mode6(2)
-+ }
-+ ACCESS read-write
-+ STATUS mandatory
-+ DESCRIPTION
-+ "Indicates whether the bridge operates using older
-+ 3 bit length negotiation fields or the newer 6 bit
-+ length field in its RIF."
-+ ::= { dot1dSr 2 }
-+
-+-- The Port-Pair Database
-+
-+-- Implementation of this group is optional.
-+
-+-- This group is implemented by those bridges that support
-+-- the direct multiport model of the source route bridging
-+-- mode as defined in the IEEE 802.5 SRT Addendum to
-+-- 802.1d.
-+
-+-- Bridges implementing this group may report 65535 for
-+-- dot1dSrPortBridgeNumber and dot1dSrPortTargetSegment,
-+-- indicating that those objects are not applicable.
-+
-+dot1dPortPairTableSize OBJECT-TYPE
-+ SYNTAX Gauge
-+ ACCESS read-only
-+ STATUS mandatory
-+ DESCRIPTION
-+ "The total number of entries in the Bridge Port
-+ Pair Database."
-+ ::= { dot1dPortPair 1 }
-+
-+-- the Bridge Port-Pair table
-+
-+-- this table represents port pairs within a bridge forming
-+-- a unique bridge path, as defined in the IEEE 802.5M SRT
-+-- Addendum.
-+
-+dot1dPortPairTable OBJECT-TYPE
-+ SYNTAX SEQUENCE OF Dot1dPortPairEntry
-+ ACCESS not-accessible
-+ STATUS mandatory
-+ DESCRIPTION
-+ "A table that contains information about every
-+
-+ port pair database entity associated with this
-+ source routing bridge."
-+ ::= { dot1dPortPair 2 }
-+
-+dot1dPortPairEntry OBJECT-TYPE
-+ SYNTAX Dot1dPortPairEntry
-+ ACCESS not-accessible
-+ STATUS mandatory
-+ DESCRIPTION
-+ "A list of information for each port pair entity
-+ of a bridge."
-+ INDEX { dot1dPortPairLowPort, dot1dPortPairHighPort }
-+ ::= { dot1dPortPairTable 1 }
-+
-+Dot1dPortPairEntry ::=
-+ SEQUENCE {
-+ dot1dPortPairLowPort
-+ INTEGER,
-+ dot1dPortPairHighPort
-+ INTEGER,
-+ dot1dPortPairBridgeNum
-+ INTEGER,
-+ dot1dPortPairBridgeState
-+ INTEGER
-+ }
-+
-+dot1dPortPairLowPort OBJECT-TYPE
-+ SYNTAX INTEGER (1..65535)
-+ ACCESS read-write
-+ STATUS mandatory
-+ DESCRIPTION
-+ "The port number of the lower numbered port for
-+ which this entry contains port pair database
-+ information."
-+ ::= { dot1dPortPairEntry 1 }
-+
-+dot1dPortPairHighPort OBJECT-TYPE
-+ SYNTAX INTEGER (1..65535)
-+ ACCESS read-write
-+ STATUS mandatory
-+ DESCRIPTION
-+ "The port number of the higher numbered port for
-+ which this entry contains port pair database
-+ information."
-+ ::= { dot1dPortPairEntry 2 }
-+
-+dot1dPortPairBridgeNum OBJECT-TYPE
-+ SYNTAX INTEGER
-+
-+ ACCESS read-write
-+ STATUS mandatory
-+ DESCRIPTION
-+ "A bridge number that uniquely identifies the path
-+ provided by this source routing bridge between the
-+ segments connected to dot1dPortPairLowPort and
-+ dot1dPortPairHighPort. The purpose of bridge
-+ number is to disambiguate between multiple paths
-+ connecting the same two LANs."
-+ ::= { dot1dPortPairEntry 3 }
-+
-+dot1dPortPairBridgeState OBJECT-TYPE
-+ SYNTAX INTEGER {
-+ enabled(1),
-+ disabled(2),
-+ invalid(3)
-+ }
-+ ACCESS read-write
-+ STATUS mandatory
-+ DESCRIPTION
-+ "The state of dot1dPortPairBridgeNum. Writing
-+ 'invalid(3)' to this object removes the
-+ corresponding entry."
-+ ::= { dot1dPortPairEntry 4 }
-+
-+END
Added: branches/net-snmp54-dev/debian/patches/58_download_mibs.README
===================================================================
--- branches/net-snmp54-dev/debian/patches/58_download_mibs.README (rev 0)
+++ branches/net-snmp54-dev/debian/patches/58_download_mibs.README 2009-11-06 18:11:10 UTC (rev 295)
@@ -0,0 +1 @@
+Patch to enable MIB file download during or after installation
Added: branches/net-snmp54-dev/debian/patches/58_download_mibs.patch
===================================================================
--- branches/net-snmp54-dev/debian/patches/58_download_mibs.patch (rev 0)
+++ branches/net-snmp54-dev/debian/patches/58_download_mibs.patch 2009-11-06 18:11:10 UTC (rev 295)
@@ -0,0 +1,628 @@
+Index: net-snmp-5.4.2.1/mibs/Makefile.mib
+===================================================================
+--- net-snmp-5.4.2.1.orig/mibs/Makefile.mib 2009-11-06 18:25:24.000000000 +0100
++++ net-snmp-5.4.2.1/mibs/Makefile.mib 2009-11-06 18:27:03.000000000 +0100
+@@ -1,182 +1,45 @@
+-# RFCHOST = ftp://ftp.nordu.net
+ RFCHOST = ftp://ftp.ietf.org
+ RFCDIR = rfc
+
+ IANAHOST = http://www.iana.org
+ IANADIR = assignments
+
+-PREFIX = /usr/local
+-ALLDIR = $(PREFIX)/share/snmp/rfc.orig
+-INSTDIR = $(PREFIX)/share/snmp/rfc
+-
+-MIBS = SNMPv2-TC.txt SNMPv2-TM.txt SNMPv2-SMI.txt SNMPv2-MIB.txt \
+- SNMPv2-CONF.txt HCNUM-TC.txt INET-ADDRESS-MIB.txt \
+- SNMP-FRAMEWORK-MIB.txt SNMP-MPD-MIB.txt SNMP-USER-BASED-SM-MIB.txt \
+- SNMP-VIEW-BASED-ACM-MIB.txt SNMP-COMMUNITY-MIB.txt \
+- SNMP-TARGET-MIB.txt SNMP-NOTIFICATION-MIB.txt SNMP-PROXY-MIB.txt \
+- AGENTX-MIB.txt SMUX-MIB.txt \
+- DISMAN-SCRIPT-MIB.txt DISMAN-SCHEDULE-MIB.txt \
+- IANA-LANGUAGE-MIB.txt IANA-ADDRESS-FAMILY-NUMBERS-MIB.txt \
+- IF-MIB.txt IF-INVERTED-STACK-MIB.txt \
+- IP-MIB.txt IP-FORWARD-MIB.txt TCP-MIB.txt UDP-MIB.txt \
+- IANAifType-MIB.txt EtherLike-MIB.txt \
+- IPV6-TC.txt IPV6-MIB.txt IPV6-ICMP-MIB.txt \
+- IPV6-TCP-MIB.txt IPV6-UDP-MIB.txt \
+- HOST-RESOURCES-MIB.txt HOST-RESOURCES-TYPES.txt \
+- NETWORK-SERVICES-MIB.txt MTA-MIB.txt \
+- RMON-MIB.txt \
+- RFC1155-SMI.txt RFC1213-MIB.txt \
+- SCTP-MIB.txt
++PREFIX = /usr
++INSTDIR = $(PREFIX)/share/mibs
++RFCTMP = $(INSTDIR)/ietf.orig
++IANATMP = $(INSTDIR)/iana.orig
+
+-MIBDEPS = Makefile.mib mibfetch smistrip
+-
+-all: $(MIBS)
++all: rfc
+
+ allmibs: ianamibs rfcmibs
+
+ rfc: allmibs
+- rm -fr $(INSTDIR)
+- mkdir $(INSTDIR)
+- cp $(ALLDIR)/* $(INSTDIR)
+- if test `uname` = SunOS ; \
+- then gpatch -d $(INSTDIR) < rfcmibs.diff; \
+- else patch -d $(INSTDIR) < rfcmibs.diff; \
+- fi
+- rm -f $(INSTDIR)/*orig
+-
+-clean:
+- rm $(MIBS)
+-
+-SNMP-FRAMEWORK-MIB.txt: $(MIBDEPS)
+- ./mibfetch $(RFCHOST) $(RFCDIR) 3411
+-
+-SNMP-MPD-MIB.txt: $(MIBDEPS)
+- ./mibfetch $(RFCHOST) $(RFCDIR) 3412 SNMP-MPD-MIB
+-
+-SNMP-TARGET-MIB.txt SNMP-NOTIFICATION-MIB.txt SNMP-PROXY-MIB.txt: $(MIBDEPS)
+- ./mibfetch $(RFCHOST) $(RFCDIR) 3413
+-
+-SNMP-USER-BASED-SM-MIB.txt: $(MIBDEPS)
+- ./mibfetch $(RFCHOST) $(RFCDIR) 3414 SNMP-USER-BASED-SM-MIB
+-
+-SNMP-VIEW-BASED-ACM-MIB.txt: $(MIBDEPS)
+- ./mibfetch $(RFCHOST) $(RFCDIR) 3415
+-
+-SNMP-COMMUNITY-MIB.txt: $(MIBDEPS)
+- ./mibfetch $(RFCHOST) $(RFCDIR) 2576
+-
+-SNMPv2-SMI.txt: $(MIBDEPS)
+- ./mibfetch $(RFCHOST) $(RFCDIR) 2578 SNMPv2-SMI
+-
+-SNMPv2-TC.txt: $(MIBDEPS)
+- ./mibfetch $(RFCHOST) $(RFCDIR) 2579
+-
+-SNMPv2-CONF.txt: $(MIBDEPS)
+- ./mibfetch $(RFCHOST) $(RFCDIR) 2580
+-
+-SNMPv2-TM.txt: $(MIBDEPS)
+- ./mibfetch $(RFCHOST) $(RFCDIR) 3417
+-
+-SNMPv2-MIB.txt: $(MIBDEPS)
+- ./mibfetch $(RFCHOST) $(RFCDIR) 3418
+-
+-AGENTX-MIB.txt: $(MIBDEPS)
+- ./mibfetch $(RFCHOST) $(RFCDIR) 2742
+-
+-SMUX-MIB.txt: $(MIBDEPS)
+- ./mibfetch $(RFCHOST) $(RFCDIR) 1227 SMUX-MIB
+-
+-DISMAN-SCHEDULE-MIB.txt: $(MIBDEPS)
+- ./mibfetch $(RFCHOST) $(RFCDIR) 3231
+-
+-DISMAN-SCRIPT-MIB.txt: $(MIBDEPS)
+- ./mibfetch $(RFCHOST) $(RFCDIR) 3165
+-
+-IF-MIB.txt: $(MIBDEPS)
+- ./mibfetch $(RFCHOST) $(RFCDIR) 2863
+-
+-IF-INVERTED-STACK-MIB.txt: $(MIBDEPS)
+- ./mibfetch $(RFCHOST) $(RFCDIR) 2864
+-
+-HCNUM-TC.txt: $(MIBDEPS)
+- ./mibfetch $(RFCHOST) $(RFCDIR) 2856
+-
+-INET-ADDRESS-MIB.txt: $(MIBDEPS)
+- ./mibfetch $(RFCHOST) $(RFCDIR) 4001
+-
+-EtherLike-MIB.txt: $(MIBDEPS)
+- ./mibfetch $(RFCHOST) $(RFCDIR) 3635
+-
+-IANAifType-MIB.txt: $(MIBDEPS)
+- ./mibfetch -x $(IANAHOST) $(IANADIR) ianaiftype-mib
+-
+-IANA-LANGUAGE-MIB.txt: $(MIBDEPS)
+- ./mibfetch -x $(IANAHOST) $(IANADIR) ianalanguage-mib
+-
+-IANA-ADDRESS-FAMILY-NUMBERS-MIB.txt: $(MIBDEPS)
+- ./mibfetch -x $(IANAHOST) $(IANADIR) ianaaddressfamilynumbers-mib
+-
+-IP-MIB.txt: $(MIBDEPS)
+- ./mibfetch $(RFCHOST) $(RFCDIR) 2011
+-
+-IP-FORWARD-MIB.txt: $(MIBDEPS)
+- ./mibfetch $(RFCHOST) $(RFCDIR) 2096
+-
+-TCP-MIB.txt: $(MIBDEPS)
+- ./mibfetch $(RFCHOST) $(RFCDIR) 4022
+-
+-UDP-MIB.txt: $(MIBDEPS)
+- ./mibfetch $(RFCHOST) $(RFCDIR) 2013
+-
+-IPV6-TC.txt IPV6-MIB.txt: $(MIBDEPS)
+- ./mibfetch $(RFCHOST) $(RFCDIR) 2465
+-
+-IPV6-ICMP-MIB.txt: $(MIBDEPS)
+- ./mibfetch $(RFCHOST) $(RFCDIR) 2466
+-
+-IPV6-TCP-MIB.txt: $(MIBDEPS)
+- ./mibfetch $(RFCHOST) $(RFCDIR) 2452
+-
+-IPV6-UDP-MIB.txt: $(MIBDEPS)
+- ./mibfetch $(RFCHOST) $(RFCDIR) 2454
+-
+-HOST-RESOURCES-MIB.txt HOST-RESOURCES-TYPES.txt: $(MIBDEPS)
+- ./mibfetch $(RFCHOST) $(RFCDIR) 2790
+-
+-RMON-MIB.txt: $(MIBDEPS)
+- ./mibfetch $(RFCHOST) $(RFCDIR) 2819
+-
+-NETWORK-SERVICES-MIB.txt: $(MIBDEPS)
+- ./mibfetch $(RFCHOST) $(RFCDIR) 2788
+-
+-MTA-MIB.txt: $(MIBDEPS)
+- ./mibfetch $(RFCHOST) $(RFCDIR) 2789
+-
+-RFC1155-SMI.txt: $(MIBDEPS)
+- ./mibfetch $(RFCHOST) $(RFCDIR) 1155
+-
+-RFC1213-MIB.txt: $(MIBDEPS)
+- ./mibfetch $(RFCHOST) $(RFCDIR) 1213
+-
+-SCTP.txt: $(MIBDEPS)
+- ./mibfetch $(RFCHOST) $(RFCDIR) 3873
++ patch -d $(RFCTMP) < rfcmibs.diff; \
++ rm -f $(RFCTMP)/*orig
++ rm -fr $(INSTDIR)/iana
++ rm -fr $(INSTDIR)/ietf
++ mkdir $(INSTDIR)/iana
++ mkdir $(INSTDIR)/ietf
++ cp $(IANATMP)/* $(INSTDIR)/iana
++ cp $(RFCTMP)/* $(INSTDIR)/ietf
++ rm -fr *orig
+
+ ianamibs: ianalist
+- [ -d $(ALLDIR) ] || mkdir $(ALLDIR)
++ [ -d $(IANATMP) ] || mkdir $(IANATMP)
+ cat ianalist | while read file mibs; \
+ do \
+ if [ "$$file" != "#" ]; \
+ then \
+- ./mibfetch -d $(ALLDIR) -x $(IANAHOST) $(IANADIR) $$file $$mibs; \
++ ./mibfetch -d $(IANATMP) -x $(IANAHOST) $(IANADIR) $$file $$mibs; \
+ fi; \
+ done
+
+ rfcmibs: rfclist
+- [ -d $(ALLDIR) ] || mkdir $(ALLDIR)
++ [ -d $(RFCTMP) ] || mkdir $(RFCTMP)
+ cat rfclist | while read rfc mibs; \
+ do \
+ if [ "$$rfc" != "#" ]; \
+ then \
+- ./mibfetch -d $(ALLDIR) $(RFCHOST) $(RFCDIR) $$rfc $$mibs; \
++ ./mibfetch -d $(RFCTMP) $(RFCHOST) $(RFCDIR) $$rfc $$mibs; \
+ fi; \
+ done
+Index: net-snmp-5.4.2.1/mibs/mibfetch
+===================================================================
+--- net-snmp-5.4.2.1.orig/mibs/mibfetch 2009-11-06 18:25:23.000000000 +0100
++++ net-snmp-5.4.2.1/mibs/mibfetch 2009-11-06 18:26:07.000000000 +0100
+@@ -48,4 +48,4 @@
+ # ncftpget -FV ftp://$host/$dir/$file
+ wget -O - -q -nv $host/$dir/$file | \
+ tr -d \\r | \
+- ./smistrip $verbose -x .txt $mdir $mibs -
++ ./smistrip $verbose $mdir $mibs -
+Index: net-snmp-5.4.2.1/mibs/rfcmibs.diff
+===================================================================
+--- net-snmp-5.4.2.1.orig/mibs/rfcmibs.diff 2009-11-06 18:25:23.000000000 +0100
++++ net-snmp-5.4.2.1/mibs/rfcmibs.diff 2009-11-06 18:26:07.000000000 +0100
+@@ -1,7 +1,6 @@
+-Only in /usr/local/share/snmp/rfc: .index
+-diff -ru /usr/local/share/snmp/rfc.orig/ADSL-LINE-MIB.txt /usr/local/share/snmp/rfc/ADSL-LINE-MIB.txt
+---- /usr/local/share/snmp/rfc.orig/ADSL-LINE-MIB.txt Sat Mar 3 17:27:00 2001
+-+++ /usr/local/share/snmp/rfc/ADSL-LINE-MIB.txt Tue Jan 23 00:42:41 2001
++diff -ru /usr/local/share/snmp/rfc.orig/ADSL-LINE-MIB /usr/local/share/snmp/rfc/ADSL-LINE-MIB
++--- /usr/local/share/snmp/rfc.orig/ADSL-LINE-MIB Sat Mar 3 17:27:00 2001
+++++ /usr/local/share/snmp/rfc/ADSL-LINE-MIB Tue Jan 23 00:42:41 2001
+ @@ -3379,7 +3379,6 @@
+ static profiles are implemented."
+
+@@ -10,9 +9,9 @@
+ MIN-ACCESS read-write
+ DESCRIPTION
+ "Read-write access is applicable when
+-diff -ru /usr/local/share/snmp/rfc.orig/DLSW-MIB.txt /usr/local/share/snmp/rfc/DLSW-MIB.txt
+---- /usr/local/share/snmp/rfc.orig/DLSW-MIB.txt Sat Mar 3 17:18:28 2001
+-+++ /usr/local/share/snmp/rfc/DLSW-MIB.txt Tue Jan 23 00:13:40 2001
++diff -ru /usr/local/share/snmp/rfc.orig/DLSW-MIB /usr/local/share/snmp/rfc/DLSW-MIB
++--- /usr/local/share/snmp/rfc.orig/DLSW-MIB Sat Mar 3 17:18:28 2001
+++++ /usr/local/share/snmp/rfc/DLSW-MIB Tue Jan 23 00:13:40 2001
+ @@ -7,7 +7,7 @@
+
+ Counter32, Gauge32, TimeTicks,
+@@ -286,9 +285,9 @@
+
+ -- ...................................................................
+ -- Node Conformance Group
+-diff -ru /usr/local/share/snmp/rfc.orig/DSA-MIB.txt /usr/local/share/snmp/rfc/DSA-MIB.txt
+---- /usr/local/share/snmp/rfc.orig/DSA-MIB.txt Sat Mar 3 17:15:36 2001
+-+++ /usr/local/share/snmp/rfc/DSA-MIB.txt Thu Feb 22 00:33:45 2001
++diff -ru /usr/local/share/snmp/rfc.orig/DSA-MIB /usr/local/share/snmp/rfc/DSA-MIB
++--- /usr/local/share/snmp/rfc.orig/DSA-MIB Sat Mar 3 17:15:36 2001
+++++ /usr/local/share/snmp/rfc/DSA-MIB Thu Feb 22 00:33:45 2001
+ @@ -10,7 +10,7 @@
+ mib-2
+ FROM RFC1213-MIB
+@@ -298,9 +297,9 @@
+
+ dsaMIB MODULE-IDENTITY
+ LAST-UPDATED "9311250000Z"
+-diff -ru /usr/local/share/snmp/rfc.orig/FDDI-SMT73-MIB.txt /usr/local/share/snmp/rfc/FDDI-SMT73-MIB.txt
+---- /usr/local/share/snmp/rfc.orig/FDDI-SMT73-MIB.txt Sat Mar 3 17:15:09 2001
+-+++ /usr/local/share/snmp/rfc/FDDI-SMT73-MIB.txt Tue Jan 23 00:11:46 2001
++diff -ru /usr/local/share/snmp/rfc.orig/FDDI-SMT73-MIB /usr/local/share/snmp/rfc/FDDI-SMT73-MIB
++--- /usr/local/share/snmp/rfc.orig/FDDI-SMT73-MIB Sat Mar 3 17:15:09 2001
+++++ /usr/local/share/snmp/rfc/FDDI-SMT73-MIB Tue Jan 23 00:11:46 2001
+ @@ -3,6 +3,8 @@
+ IMPORTS
+ Counter
+@@ -310,9 +309,9 @@
+ OBJECT-TYPE
+ FROM RFC-1212;
+
+-diff -ru /usr/local/share/snmp/rfc.orig/HPR-MIB.txt /usr/local/share/snmp/rfc/HPR-MIB.txt
+---- /usr/local/share/snmp/rfc.orig/HPR-MIB.txt Sat Mar 3 17:19:54 2001
+-+++ /usr/local/share/snmp/rfc/HPR-MIB.txt Tue Jan 23 00:25:54 2001
++diff -ru /usr/local/share/snmp/rfc.orig/HPR-MIB /usr/local/share/snmp/rfc/HPR-MIB
++--- /usr/local/share/snmp/rfc.orig/HPR-MIB Sat Mar 3 17:19:54 2001
+++++ /usr/local/share/snmp/rfc/HPR-MIB Tue Jan 23 00:25:54 2001
+ @@ -18,7 +18,7 @@
+ FROM APPN-MIB;
+
+@@ -322,9 +321,9 @@
+ ORGANIZATION "AIW APPN / HPR MIB SIG"
+ CONTACT-INFO
+ "
+-diff -ru /usr/local/share/snmp/rfc.orig/MIP-MIB.txt /usr/local/share/snmp/rfc/MIP-MIB.txt
+---- /usr/local/share/snmp/rfc.orig/MIP-MIB.txt Sat Mar 3 17:17:42 2001
+-+++ /usr/local/share/snmp/rfc/MIP-MIB.txt Tue Jan 23 00:25:27 2001
++diff -ru /usr/local/share/snmp/rfc.orig/MIP-MIB /usr/local/share/snmp/rfc/MIP-MIB
++--- /usr/local/share/snmp/rfc.orig/MIP-MIB Sat Mar 3 17:17:42 2001
+++++ /usr/local/share/snmp/rfc/MIP-MIB Tue Jan 23 00:25:27 2001
+ @@ -1,7 +1,7 @@
+ MIP-MIB DEFINITIONS ::= BEGIN
+
+@@ -343,9 +342,9 @@
+ NOTIFICATIONS { mipAuthFailure }
+ STATUS current
+ DESCRIPTION
+-diff -ru /usr/local/share/snmp/rfc.orig/Modem-MIB.txt /usr/local/share/snmp/rfc/Modem-MIB.txt
+---- /usr/local/share/snmp/rfc.orig/Modem-MIB.txt Sat Mar 3 17:16:35 2001
+-+++ /usr/local/share/snmp/rfc/Modem-MIB.txt Mon Jan 22 23:53:08 2001
++diff -ru /usr/local/share/snmp/rfc.orig/Modem-MIB /usr/local/share/snmp/rfc/Modem-MIB
++--- /usr/local/share/snmp/rfc.orig/Modem-MIB Sat Mar 3 17:16:35 2001
+++++ /usr/local/share/snmp/rfc/Modem-MIB Mon Jan 22 23:53:08 2001
+ @@ -23,7 +23,7 @@
+ E-mail: waldbusser at cmu.edu"
+ DESCRIPTION
+@@ -355,9 +354,9 @@
+
+ mdmMib OBJECT IDENTIFIER ::= { mib-2 38 }
+
+-diff -ru /usr/local/share/snmp/rfc.orig/PPP-LCP-MIB.txt /usr/local/share/snmp/rfc/PPP-LCP-MIB.txt
+---- /usr/local/share/snmp/rfc.orig/PPP-LCP-MIB.txt Sat Mar 3 17:14:46 2001
+-+++ /usr/local/share/snmp/rfc/PPP-LCP-MIB.txt Sat Mar 3 23:13:27 2001
++diff -ru /usr/local/share/snmp/rfc.orig/PPP-LCP-MIB /usr/local/share/snmp/rfc/PPP-LCP-MIB
++--- /usr/local/share/snmp/rfc.orig/PPP-LCP-MIB Sat Mar 3 17:14:46 2001
+++++ /usr/local/share/snmp/rfc/PPP-LCP-MIB Sat Mar 3 23:13:27 2001
+ @@ -182,7 +182,7 @@
+ ::= { pppLinkStatusEntry 5 }
+
+@@ -394,9 +393,9 @@
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+-diff -ru /usr/local/share/snmp/rfc.orig/RDBMS-MIB.txt /usr/local/share/snmp/rfc/RDBMS-MIB.txt
+---- /usr/local/share/snmp/rfc.orig/RDBMS-MIB.txt Sat Mar 3 17:16:41 2001
+-+++ /usr/local/share/snmp/rfc/RDBMS-MIB.txt Tue Jan 23 00:24:04 2001
++diff -ru /usr/local/share/snmp/rfc.orig/RDBMS-MIB /usr/local/share/snmp/rfc/RDBMS-MIB
++--- /usr/local/share/snmp/rfc.orig/RDBMS-MIB Sat Mar 3 17:16:41 2001
+++++ /usr/local/share/snmp/rfc/RDBMS-MIB Tue Jan 23 00:24:04 2001
+ @@ -6,8 +6,8 @@
+ FROM SNMPv2-SMI
+ DisplayString, DateAndTime, AutonomousType
+@@ -419,10 +418,10 @@
+ MODULE RDBMS-MIB
+ MANDATORY-GROUPS { rdbmsGroup }
+
+-Only in /usr/local/share/snmp/rfc: RFC-1215.txt
+-diff -ru /usr/local/share/snmp/rfc.orig/RFC1414-MIB.txt /usr/local/share/snmp/rfc/RFC1414-MIB.txt
+---- /usr/local/share/snmp/rfc.orig/RFC1414-MIB.txt Sat Mar 3 17:14:37 2001
+-+++ /usr/local/share/snmp/rfc/RFC1414-MIB.txt Tue Feb 20 00:25:21 2001
++Only in /usr/local/share/snmp/rfc: RFC-1215
++diff -ru /usr/local/share/snmp/rfc.orig/RFC1414-MIB /usr/local/share/snmp/rfc/RFC1414-MIB
++--- /usr/local/share/snmp/rfc.orig/RFC1414-MIB Sat Mar 3 17:14:37 2001
+++++ /usr/local/share/snmp/rfc/RFC1414-MIB Tue Feb 20 00:25:21 2001
+ @@ -3,6 +3,7 @@
+ IMPORTS
+ OBJECT-TYPE
+@@ -431,9 +430,9 @@
+ tcpConnLocalAddress, tcpConnLocalPort,
+ tcpConnRemAddress, tcpConnRemPort
+ FROM RFC1213-MIB;
+-diff -ru /usr/local/share/snmp/rfc.orig/SNA-NAU-MIB.txt /usr/local/share/snmp/rfc/SNA-NAU-MIB.txt
+---- /usr/local/share/snmp/rfc.orig/SNA-NAU-MIB.txt Sat Mar 3 17:16:24 2001
+-+++ /usr/local/share/snmp/rfc/SNA-NAU-MIB.txt Mon Jan 22 23:57:44 2001
++diff -ru /usr/local/share/snmp/rfc.orig/SNA-NAU-MIB /usr/local/share/snmp/rfc/SNA-NAU-MIB
++--- /usr/local/share/snmp/rfc.orig/SNA-NAU-MIB Sat Mar 3 17:16:24 2001
+++++ /usr/local/share/snmp/rfc/SNA-NAU-MIB Mon Jan 22 23:57:44 2001
+ @@ -17,7 +17,7 @@
+ DisplayString, RowStatus, TimeStamp, InstancePointer
+ FROM SNMPv2-TC
+@@ -443,9 +442,9 @@
+ OBJECT-TYPE, MODULE-IDENTITY, NOTIFICATION-TYPE
+ FROM SNMPv2-SMI
+
+-diff -ru /usr/local/share/snmp/rfc.orig/TCPIPX-MIB.txt /usr/local/share/snmp/rfc/TCPIPX-MIB.txt
+---- /usr/local/share/snmp/rfc.orig/TCPIPX-MIB.txt Sat Mar 3 17:17:17 2001
+-+++ /usr/local/share/snmp/rfc/TCPIPX-MIB.txt Sat Mar 3 16:51:11 2001
++diff -ru /usr/local/share/snmp/rfc.orig/TCPIPX-MIB /usr/local/share/snmp/rfc/TCPIPX-MIB
++--- /usr/local/share/snmp/rfc.orig/TCPIPX-MIB Sat Mar 3 17:17:17 2001
+++++ /usr/local/share/snmp/rfc/TCPIPX-MIB Sat Mar 3 16:51:11 2001
+ @@ -1,6 +1,8 @@
+ TCPIPX-MIB DEFINITIONS ::= BEGIN
+
+@@ -464,9 +463,9 @@
+
+ -- TCP/IPX MIB object idenfifiers
+
+-diff -ru /usr/local/share/snmp/rfc.orig/UPS-MIB.txt /usr/local/share/snmp/rfc/UPS-MIB.txt
+---- /usr/local/share/snmp/rfc.orig/UPS-MIB.txt Sat Mar 3 17:16:01 2001
+-+++ /usr/local/share/snmp/rfc/UPS-MIB.txt Mon Jan 22 23:55:45 2001
++diff -ru /usr/local/share/snmp/rfc.orig/UPS-MIB /usr/local/share/snmp/rfc/UPS-MIB
++--- /usr/local/share/snmp/rfc.orig/UPS-MIB Sat Mar 3 17:16:01 2001
+++++ /usr/local/share/snmp/rfc/UPS-MIB Mon Jan 22 23:55:45 2001
+ @@ -2,7 +2,7 @@
+
+ IMPORTS
+@@ -476,9 +475,9 @@
+ FROM SNMPv2-SMI
+ DisplayString, TimeStamp, TimeInterval, TestAndIncr,
+ AutonomousType
+-diff -ru /usr/local/share/snmp/rfc.orig/SMUX-MIB.txt /usr/local/share/snmp/rfc/SMUX-MIB.txt
+---- /usr/local/share/snmp/rfc.orig/SMUX-MIB.txt 2002-06-15 15:31:22.000000000 +0200
+-+++ /usr/local/share/snmp/rfc/SMUX-MIB.txt 2002-06-15 15:31:22.000000000 +0200
++diff -ru /usr/local/share/snmp/rfc.orig/SMUX-MIB /usr/local/share/snmp/rfc/SMUX-MIB
++--- /usr/local/share/snmp/rfc.orig/SMUX-MIB 2002-06-15 15:31:22.000000000 +0200
+++++ /usr/local/share/snmp/rfc/SMUX-MIB 2002-06-15 15:31:22.000000000 +0200
+ @@ -3,6 +3,8 @@
+ IMPORTS
+ enterprises
+Index: net-snmp-5.4.2.1/mibs/rfclist
+===================================================================
+--- net-snmp-5.4.2.1.orig/mibs/rfclist 2009-11-06 18:25:23.000000000 +0100
++++ net-snmp-5.4.2.1/mibs/rfclist 2009-11-06 18:26:07.000000000 +0100
+@@ -1,4 +1,4 @@
+-# updated 2005-03-14
++# updated 2007-10-15
+ 1155 RFC1155-SMI
+ 1213 RFC1213-MIB
+ 1227 SMUX-MIB
+@@ -6,6 +6,8 @@
+ 1381 RFC1381-MIB
+ 1382 RFC1382-MIB
+ 1414 RFC1414-MIB
++1447 SNMPv2-PARTY-MIB
++1451 SNMPv2-M2M-MIB
+ 1461 MIOX25-MIB
+ 1471 PPP-LCP-MIB
+ 1472 PPP-SEC-MIB
+@@ -16,10 +18,11 @@
+ 1525 SOURCE-ROUTING-MIB
+ 1559 DECNET-PHIV-MIB
+ 1567 DSA-MIB
++1592 DPI20-MIB
++1593 IBM-6611-APPN-MIB
+ 1611 DNS-SERVER-MIB
+ 1612 DNS-RESOLVER-MIB
+ 1628 UPS-MIB
+-1657 BGP4-MIB
+ 1658 CHARACTER-MIB
+ 1659 RS-232-MIB
+ 1660 PARALLEL-MIB
+@@ -33,10 +36,9 @@
+ 1748 TOKENRING-MIB
+ 1749 TOKENRING-STATION-SR-MIB
+ 1792 TCPIPX-MIB
+-1850 OSPF-MIB:OSPF-TRAP-MIB
++1910 SNMPv2-USEC-MIB
+ 2006 MIP-MIB
+ 2020 DOT12-IF-MIB
+-2021 RMON2-MIB
+ 2024 DLSW-MIB
+ 2051 APPC-MIB
+ 2108 SNMP-REPEATER-MIB
+@@ -51,17 +53,15 @@
+ 2266 DOT12-RPTR-MIB
+ 2287 SYSAPPL-MIB
+ 2320 IPOA-MIB
+-2366 IPATM-IPMC-MIB
++2417 IPATM-IPMC-MIB
+ 2452 IPV6-TCP-MIB
+ 2454 IPV6-UDP-MIB
+ 2455 APPN-MIB
+ 2456 APPN-TRAP-MIB
+ 2457 EBN-MIB
+-2465 IPV6-TC:IPV6-MIB
++2465 IPV6-MIB:IPV6-TC
+ 2466 IPV6-ICMP-MIB
+ 2494 DS0-MIB:DS0BUNDLE-MIB
+-2495 DS1-MIB
+-2496 DS3-MIB
+ 2512 ATM-ACCOUNTING-INFORMATION-MIB
+ 2513 ACCOUNTING-CONTROL-MIB
+ 2514 ATM-TC-MIB
+@@ -69,7 +69,6 @@
+ 2561 TN3270E-MIB
+ 2562 TN3270E-RT-MIB
+ 2564 APPLICATION-MIB
+-2576 SNMP-COMMUNITY-MIB
+ 2578 SNMPv2-SMI
+ 2579 SNMPv2-TC
+ 2580 SNMPv2-CONF
+@@ -77,15 +76,8 @@
+ 2594 WWW-MIB
+ 2605 DIRECTORY-SERVER-MIB
+ 2613 SMON-MIB
+-2618 RADIUS-AUTH-CLIENT-MIB
+-2619 RADIUS-AUTH-SERVER-MIB
+-2620 RADIUS-ACC-CLIENT-MIB
+-2621 RADIUS-ACC-SERVER-MIB
+-2662 ADSL-TC-MIB:ADSL-LINE-MIB
++2662 ADSL-LINE-MIB:ADSL-TC-MIB
+ 2666 ETHER-CHIPSET-MIB
+-2669 DOCS-CABLE-DEVICE-MIB
+-2670 DOCS-IF-MIB
+-2674 P-BRIDGE-MIB:Q-BRIDGE-MIB
+ 2677 NHRP-MIB
+ 2707 Job-Monitoring-MIB
+ 2720 FLOW-METER-MIB
+@@ -102,7 +94,6 @@
+ 2863 IF-MIB
+ 2864 IF-INVERTED-STACK-MIB
+ 2922 PTOPO-MIB
+-2925 DISMAN-PING-MIB:DISMAN-TRACEROUTE-MIB:DISMAN-NSLOOKUP-MIB
+ 2932 IPMROUTE-STD-MIB
+ 2933 IGMP-STD-MIB
+ 2934 PIM-MIB
+@@ -119,19 +110,21 @@
+ 3083 DOCS-BPI-MIB
+ 3144 INTERFACETOPN-MIB
+ 3165 DISMAN-SCRIPT-MIB
++3176 SFLOW-MIB
+ 3201 CIRCUIT-IF-MIB
+ 3202 FRSLD-MIB
+ 3231 DISMAN-SCHEDULE-MIB
+ 3273 HC-RMON-MIB
+-3276 HDSL2-SHDSL-LINE-MIB
++3287 DSMON-MIB
+ 3289 DIFFSERV-DSCP-TC:DIFFSERV-MIB
+ 3295 GSMP-MIB
+-3371 L2TP-MIB
++3371 L2TP-MIB
+ 3411 SNMP-FRAMEWORK-MIB
+ 3412 SNMP-MPD-MIB
+-3413 SNMP-TARGET-MIB:SNMP-NOTIFICATION-MIB:SNMP-PROXY-MIB
++3413 SNMP-NOTIFICATION-MIB:SNMP-PROXY-MIB:SNMP-TARGET-MIB
+ 3414 SNMP-USER-BASED-SM-MIB
+ 3415 SNMP-VIEW-BASED-ACM-MIB
++3416 SNMPv2-PDU
+ 3417 SNMPv2-TM
+ 3418 SNMPv2-MIB
+ 3419 TRANSPORT-ADDRESS-MIB
+@@ -140,6 +133,7 @@
+ 3440 ADSL-LINE-EXT-MIB
+ 3498 APS-MIB
+ 3559 MALLOC-MIB
++3584 SNMP-COMMUNITY-MIB
+ 3591 OPT-IF-MIB
+ 3592 SONET-MIB
+ 3593 PerfHist-TC-MIB
+@@ -147,25 +141,24 @@
+ 3606 ATM2-MIB
+ 3621 POWER-ETHERNET-MIB
+ 3635 EtherLike-MIB
+-3636 MAU-MIB
+-3637 ETHER-WIS
+ 3705 HC-PerfHist-TC-MIB
+ 3728 VDSL-LINE-MIB
+ 3729 APM-MIB
+ 3747 DIFFSERV-CONFIG-MIB
+ 3805 Printer-MIB
+ 3806 Finisher-MIB
+-# 3808 IANA-CHARSET-MIB
+ 3811 MPLS-TC-STD-MIB
+ 3812 MPLS-TE-STD-MIB
+ 3813 MPLS-LSR-STD-MIB
+ 3814 MPLS-FTN-STD-MIB
+-3815 MPLS-LDP-STD-MIB:MPLS-LDP-ATM-STD-MIB:MPLS-LDP-FRAME-RELAY-STD-MIB:MPLS-LDP-GENERIC-STD-MIB
+-3816 ROHC-MIB:ROHC-UNCOMPRESSED-MIB:ROHC-RTP-MIB
++3815 MPLS-LDP-ATM-STD-MIB:MPLS-LDP-FRAME-RELAY-STD-MIB:MPLS-LDP-GENERIC-STD-MIB:MPLS-LDP-STD-MIB
++3816 ROHC-MIB:ROHC-RTP-MIB:ROHC-UNCOMPRESSED-MIB
+ 3826 SNMP-USM-AES-MIB
++3872 TRIP-MIB:TRIP-TC-MIB
+ 3873 SCTP-MIB
+-3877 ALARM-MIB:ITU-ALARM-TC-MIB:ITU-ALARM-MIB
++3877 ALARM-MIB:ITU-ALARM-MIB:ITU-ALARM-TC-MIB
+ 3878 ARC-MIB
++3896 DS3-MIB
+ 3970 TE-MIB
+ 4001 INET-ADDRESS-MIB
+ 4008 NAT-MIB
+@@ -180,9 +173,64 @@
+ 4131 DOCS-IETF-BPI2-MIB
+ 4133 ENTITY-MIB
+ 4149 SSPM-MIB
++4150 TPM-MIB
+ 4188 BRIDGE-MIB
+ 4220 TE-LINK-STD-MIB
+ 4265 VPN-TC-STD-MIB
+-4268 ENTITY-STATE-TC-MIB:ENTITY-STATE-MIB
++4268 ENTITY-STATE-MIB:ENTITY-STATE-TC-MIB
++4273 BGP4-MIB
+ 4292 IP-FORWARD-MIB
+ 4293 IP-MIB
++4295 MOBILEIPV6-MIB
++4318 RSTP-MIB
++4319 HDSL2-SHDSL-LINE-MIB
++4323 DOCS-IETF-QOS-MIB
++4363 P-BRIDGE-MIB:Q-BRIDGE-MIB
++4368 MPLS-LC-ATM-STD-MIB:MPLS-LC-FR-STD-MIB
++4369 IFCP-MGMT-MIB
++4382 MPLS-L3VPN-STD-MIB
++4404 FCIP-MGMT-MIB
++4438 T11-FC-NAME-SERVER-MIB
++4439 T11-FC-FABRIC-ADDR-MGR-MIB:T11-TC-MIB
++4444 ISIS-MIB
++4455 SCSI-MIB
++4498 AGGREGATE-MIB:TIME-AGGREGATE-MIB
++4502 RMON2-MIB
++4544 ISCSI-MIB
++4545 IPS-AUTH-MIB
++4546 DOCS-IF-MIB
++4547 DOCS-IETF-CABLE-DEVICE-NOTIFICATION-MIB
++4560 DISMAN-NSLOOKUP-MIB:DISMAN-PING-MIB:DISMAN-TRACEROUTE-MIB
++4624 MSDP-MIB
++4625 T11-FC-ROUTE-MIB
++4626 T11-FC-FSPF-MIB
++4631 LMP-MIB
++4639 DOCS-CABLE-DEVICE-MIB
++4668 RADIUS-AUTH-CLIENT-MIB
++4669 RADIUS-AUTH-SERVER-MIB
++4670 RADIUS-ACC-CLIENT-MIB
++4671 RADIUS-ACC-SERVER-MIB
++4672 RADIUS-DYNAUTH-CLIENT-MIB
++4673 RADIUS-DYNAUTH-SERVER-MIB
++4682 PKTC-IETF-MTA-MIB
++4706 ADSL2-LINE-MIB:ADSL2-LINE-TC-MIB
++4711 RAQMON-MIB
++4712 RAQMON-RDS-MIB
++4747 T11-FC-VIRTUAL-FABRIC-MIB
++4750 OSPF-MIB:OSPF-TRAP-MIB
++4780 SIP-COMMON-MIB:SIP-SERVER-MIB:SIP-TC-MIB:SIP-UA-MIB
++4789 SNMP-IEEE802-TM-MIB
++4801 GMPLS-TC-STD-MIB
++4802 GMPLS-TE-STD-MIB
++4803 GMPLS-LABEL-STD-MIB:GMPLS-LSR-STD-MIB
++4805 DS1-MIB
++4807 IPSEC-SPD-MIB
++4836 MAU-MIB
++4837 DOT3-EPON-MIB
++4878 DOT3-OAM-MIB
++4898 TCP-ESTATS-MIB
++4935 T11-FC-FABRIC-CONFIG-SERVER-MIB
++4936 T11-FC-FABRIC-LOCK-MIB:T11-FC-ZONE-SERVER-MIB
++4939 ISNS-MIB
++4983 T11-FC-RSCN-MIB
++5017 URI-TC-MIB
Modified: branches/net-snmp54-dev/debian/patches/series
===================================================================
--- branches/net-snmp54-dev/debian/patches/series 2009-11-06 18:09:35 UTC (rev 294)
+++ branches/net-snmp54-dev/debian/patches/series 2009-11-06 18:11:10 UTC (rev 295)
@@ -9,3 +9,4 @@
31_silence_subcontainer.patch
32_mnttab_path.patch
56_manpage.patch
+58_download_mibs.patch
Modified: branches/net-snmp54-dev/debian/rules
===================================================================
--- branches/net-snmp54-dev/debian/rules 2009-11-06 18:09:35 UTC (rev 294)
+++ branches/net-snmp54-dev/debian/rules 2009-11-06 18:11:10 UTC (rev 295)
@@ -51,6 +51,7 @@
--with-mib-modules="$(MIB_MODULES)" \
--enable-mfd-rewrites \
--with-mnttab=/etc/mtab \
+ --with-mibdirs="\$HOME/.snmp/mibs:/usr/share/mibs/iana:/usr/share/mibs/ietf:/usr/share/mibs/netsnmp" \
--with-defaults
pre-build::
Modified: branches/net-snmp54-dev/debian/snmpd.default
===================================================================
--- branches/net-snmp54-dev/debian/snmpd.default 2009-11-06 18:09:35 UTC (rev 294)
+++ branches/net-snmp54-dev/debian/snmpd.default 2009-11-06 18:11:10 UTC (rev 295)
@@ -2,7 +2,7 @@
# MIB directories. /usr/share/snmp/mibs is the default, but
# including it here avoids some strange problems.
-export MIBDIRS=/usr/share/snmp/mibs
+export MIBDIRS=/usr/share/mibs/iana:/usr/share/mibs/ietf:/usr/share/mibs/netsnmp
# snmpd control (yes means start daemon).
SNMPDRUN=yes
Modified: branches/net-snmp54-dev/debian/snmpd.init
===================================================================
--- branches/net-snmp54-dev/debian/snmpd.init 2009-11-06 18:09:35 UTC (rev 294)
+++ branches/net-snmp54-dev/debian/snmpd.init 2009-11-06 18:11:10 UTC (rev 295)
@@ -21,7 +21,7 @@
test -x /usr/sbin/snmptrapd || exit 0
# Defaults
-export MIBDIRS=/usr/share/snmp/mibs
+export MIBDIRS=/usr/share/mibs/iana:/usr/share/mibs/ietf:/usr/share/mibs/netsnmp
SNMPDRUN=yes
SNMPDOPTS='-Lsd -Lf /dev/null -p /var/run/snmpd.pid'
TRAPDRUN=no
Modified: trunk/debian/control
===================================================================
--- trunk/debian/control 2009-11-06 18:09:35 UTC (rev 294)
+++ trunk/debian/control 2009-11-06 18:11:10 UTC (rev 295)
@@ -46,7 +46,7 @@
Replaces: snmp (<=3.6.2-3), libsnmp, zebra, zebra-pj, quagga, libsnmp-dev (<< 5.4~dfsg), libsnmp9-dev (<< 5.4~dfsg), libsnmp5-dev
Provides: libsnmp
Conflicts: libsnmp, libsnmp-dev (<< 5.4~dfsg), libsnmp9-dev (<< 5.4~dfsg), libsnmp5-dev
-Depends: ${misc:Depends}
+Depends: ${misc:Depends}, gawk, wget
Description: SNMP (Simple Network Management Protocol) MIBs and documentation
The Simple Network Management Protocol (SNMP) provides a framework
for the exchange of management information between agents (servers)
Added: trunk/debian/libsnmp-base.config
===================================================================
--- trunk/debian/libsnmp-base.config (rev 0)
+++ trunk/debian/libsnmp-base.config 2009-11-06 18:11:10 UTC (rev 295)
@@ -0,0 +1,12 @@
+#!/bin/sh
+
+set -e
+
+. /usr/share/debconf/confmodule
+
+db_version 2.0
+
+db_input high libsnmp-base/download_mibs || true
+db_go
+
+exit 0
Modified: trunk/debian/libsnmp-base.install
===================================================================
--- trunk/debian/libsnmp-base.install 2009-11-06 18:09:35 UTC (rev 294)
+++ trunk/debian/libsnmp-base.install 2009-11-06 18:11:10 UTC (rev 295)
@@ -1,4 +1,4 @@
-debian/tmp/usr/share/snmp/mibs
+debian/tmp/usr/share/mibs
debian/tmp/usr/share/snmp/mib2c-data
debian/tmp/usr/share/man/man5/mib2c.conf.5snmp
debian/tmp/usr/share/man/man5/snmp.conf.5snmp
Added: trunk/debian/libsnmp-base.postinst
===================================================================
--- trunk/debian/libsnmp-base.postinst (rev 0)
+++ trunk/debian/libsnmp-base.postinst 2009-11-06 18:11:10 UTC (rev 295)
@@ -0,0 +1,13 @@
+#!/bin/sh
+
+set -e
+
+. /usr/share/debconf/confmodule
+db_version 2.0
+
+db_get libsnmp-base/download_mibs
+if [ "$RET" = "true" ]; then
+ cd /usr/share/mibs; make -f Makefile.mib
+fi
+
+#DEBHELPER#
Modified: trunk/debian/libsnmp-base.prerm
===================================================================
--- trunk/debian/libsnmp-base.prerm 2009-11-06 18:09:35 UTC (rev 294)
+++ trunk/debian/libsnmp-base.prerm 2009-11-06 18:11:10 UTC (rev 295)
@@ -2,7 +2,9 @@
set -e
-rm -f /usr/share/snmp/mibs/.index
+rm -f /usr/share/mibs/netsnmp/.index
+rm -f /usr/share/mibs/ietf/.index
+rm -f /usr/share/mibs/iana/.index
#DEBHELPER#
Added: trunk/debian/libsnmp-base.templates
===================================================================
--- trunk/debian/libsnmp-base.templates (rev 0)
+++ trunk/debian/libsnmp-base.templates 2009-11-06 18:11:10 UTC (rev 295)
@@ -0,0 +1,6 @@
+Template: libsnmp-base/download_mibs
+Type: boolean
+_Description: Download and extract MIBs from RFCs and IANA?
+ Various snmp software needs extracted MIBs from RFCs and IANA -
+ which cannot be shipped - to be working. These MIBs can be
+ automatically fetched and extracted as part of installing this package.
Modified: trunk/debian/patches/03_makefiles.patch
===================================================================
--- trunk/debian/patches/03_makefiles.patch 2009-11-06 18:09:35 UTC (rev 294)
+++ trunk/debian/patches/03_makefiles.patch 2009-11-06 18:11:10 UTC (rev 295)
@@ -1,7 +1,7 @@
Index: net-snmp-5.4.2.1/local/Makefile.in
===================================================================
---- net-snmp-5.4.2.1.orig/local/Makefile.in 2009-11-06 15:03:06.000000000 +0100
-+++ net-snmp-5.4.2.1/local/Makefile.in 2009-11-06 15:05:53.000000000 +0100
+--- net-snmp-5.4.2.1.orig/local/Makefile.in 2009-11-06 17:21:05.000000000 +0100
++++ net-snmp-5.4.2.1/local/Makefile.in 2009-11-06 17:25:10.000000000 +0100
@@ -100,7 +100,7 @@
mib2c.made: $(srcdir)/mib2c
@@ -13,11 +13,14 @@
fi
Index: net-snmp-5.4.2.1/Makefile.top
===================================================================
---- net-snmp-5.4.2.1.orig/Makefile.top 2009-11-06 15:03:06.000000000 +0100
-+++ net-snmp-5.4.2.1/Makefile.top 2009-11-06 15:05:53.000000000 +0100
-@@ -26,6 +26,7 @@
+--- net-snmp-5.4.2.1.orig/Makefile.top 2009-11-06 17:21:05.000000000 +0100
++++ net-snmp-5.4.2.1/Makefile.top 2009-11-06 17:25:41.000000000 +0100
+@@ -24,8 +24,9 @@
+ man5dir = $(mandir)/man5
+ man8dir = $(mandir)/man8
snmplibdir = $(datadir)/snmp
- mibdir = $(snmplibdir)/mibs
+-mibdir = $(snmplibdir)/mibs
++mibdir = $(datadir)/mibs/netsnmp
persistentdir = @PERSISTENT_DIRECTORY@
+sysconfdir = @sysconfdir@
DESTDIR = @INSTALL_PREFIX@
@@ -25,17 +28,21 @@
Index: net-snmp-5.4.2.1/mibs/Makefile.in
===================================================================
---- net-snmp-5.4.2.1.orig/mibs/Makefile.in 2009-11-06 15:03:06.000000000 +0100
-+++ net-snmp-5.4.2.1/mibs/Makefile.in 2009-11-06 15:07:25.000000000 +0100
-@@ -13,57 +13,35 @@
+--- net-snmp-5.4.2.1.orig/mibs/Makefile.in 2009-11-06 17:21:05.000000000 +0100
++++ net-snmp-5.4.2.1/mibs/Makefile.in 2009-11-06 17:25:10.000000000 +0100
+@@ -13,53 +13,33 @@
OTHERUNINSTALL=mibsuninstall
-V1MIBS = RFC1155-SMI.txt RFC1213-MIB.txt RFC-1215.txt
--
++NETSNMPMIBS = NET-SNMP-TC NET-SNMP-MIB NET-SNMP-AGENT-MIB \
++ NET-SNMP-EXAMPLES-MIB NET-SNMP-EXTEND-MIB
+
-V2MIBS = SNMPv2-CONF.txt SNMPv2-SMI.txt SNMPv2-TC.txt SNMPv2-TM.txt \
- SNMPv2-MIB.txt
--
++UCDMIBS = UCD-SNMP-MIB UCD-DEMO-MIB UCD-IPFWACC-MIB \
++ UCD-DLMOD-MIB UCD-DISKIO-MIB
+
-V3MIBS = SNMP-FRAMEWORK-MIB.txt SNMP-MPD-MIB.txt SNMP-TARGET-MIB.txt \
- SNMP-NOTIFICATION-MIB.txt SNMP-PROXY-MIB.txt \
- SNMP-USER-BASED-SM-MIB.txt SNMP-VIEW-BASED-ACM-MIB.txt \
@@ -60,20 +67,19 @@
- SNMP-USM-DH-OBJECTS-MIB.txt \
- SCTP-MIB.txt
-
- NETSNMPMIBS = NET-SNMP-TC.txt NET-SNMP-MIB.txt NET-SNMP-AGENT-MIB.txt \
- NET-SNMP-EXAMPLES-MIB.txt NET-SNMP-EXTEND-MIB.txt
-
- UCDMIBS = UCD-SNMP-MIB.txt UCD-DEMO-MIB.txt UCD-IPFWACC-MIB.txt \
- UCD-DLMOD-MIB.txt UCD-DISKIO-MIB.txt
-
+-NETSNMPMIBS = NET-SNMP-TC.txt NET-SNMP-MIB.txt NET-SNMP-AGENT-MIB.txt \
+- NET-SNMP-EXAMPLES-MIB.txt NET-SNMP-EXTEND-MIB.txt
+-
+-UCDMIBS = UCD-SNMP-MIB.txt UCD-DEMO-MIB.txt UCD-IPFWACC-MIB.txt \
+- UCD-DLMOD-MIB.txt UCD-DISKIO-MIB.txt
+-
-DEFAULTMIBS = @default_mibs_install@
-+EXTRAMIBS = BGP4-MIB.txt BRIDGE-MIB.txt GNOME-SMI.txt OSPF-MIB.txt \
-+ OSPF-TRAP-MIB.txt RIPv2-MIB.txt SOURCE-ROUTING-MIB.txt \
-+ LM-SENSORS-MIB.txt
-
+-
-MIBS = $(V1MIBS) $(V2MIBS) $(V3MIBS) $(RFCMIBS) \
- $(AGENTMIBS) $(IANAMIBS) \
- $(NETSNMPMIBS) $(UCDMIBS) $(DEFAULTMIBS)
++EXTRAMIBS = GNOME-SMI LM-SENSORS-MIB
++
+MIBS = $(NETSNMPMIBS) $(UCDMIBS) $(EXTRAMIBS)
+
+HELPERS = Makefile.mib ianalist rfclist rfcmibs.diff
@@ -83,51 +89,37 @@
mibsinstall: installdirs
- @for i in $(MIBS) ; do \
-+ @for i in $(MIBS) $(HELPERS) ; do \
- $(INSTALL_DATA) $(srcdir)/$$i $(INSTALL_PREFIX)$(mibdir) ; \
- echo "install: installed $$i in $(INSTALL_PREFIX)$(mibdir)" ; \
- done
-+ @for i in $(BINHELPERS) ; do \
-+ $(INSTALL) $(srcdir)/$$i $(INSTALL_PREFIX)$(mibdir) ; \
-+ echo "install: installed $$i in $(INSTALL_PREFIX)$(mibdir)" ; \
+- $(INSTALL_DATA) $(srcdir)/$$i $(INSTALL_PREFIX)$(mibdir) ; \
+- echo "install: installed $$i in $(INSTALL_PREFIX)$(mibdir)" ; \
++ @for i in $(MIBS); do \
++ $(INSTALL_DATA) $(srcdir)/$$i.txt $(INSTALL_PREFIX)$(mibdir)/$$i ; \
++ echo "install: installed $$i.txt in $(INSTALL_PREFIX)$(mibdir)/$$i" ; \
+ done
++ @for i in $(HELPERS); do \
++ $(INSTALL_DATA) $(srcdir)/$$i $(INSTALL_PREFIX)$(datadir)/mibs ; \
++ echo "install: installed $$i in $(INSTALL_PREFIX)$(datadir)/mibs" ; \
++ done
++ @for i in $(BINHELPERS) ; do \
++ $(INSTALL) $(srcdir)/$$i $(INSTALL_PREFIX)$(datadir)/mibs ; \
++ echo "install: installed $$i in $(INSTALL_PREFIX)$(datadir)/mibs" ; \
+ done
mibsuninstall: installdirs
-- @for i in $(MIBS) ; do \
-+ @for i in $(MIBS) $(HELPERS) $(BINHELPERS) ; do \
+@@ -67,6 +47,10 @@
rm -f $(INSTALL_PREFIX)$(mibdir)/$$i ; \
echo "removed $$i from $(INSTALL_PREFIX)$(mibdir)" ; \
done
-Index: net-snmp-5.4.2.1/mibs/Makefile.mib
-===================================================================
---- net-snmp-5.4.2.1.orig/mibs/Makefile.mib 2009-11-06 15:03:06.000000000 +0100
-+++ net-snmp-5.4.2.1/mibs/Makefile.mib 2009-11-06 15:05:53.000000000 +0100
-@@ -5,9 +5,9 @@
- IANAHOST = http://www.iana.org
- IANADIR = assignments
++ @for i in $(HELPERS) $(BINHELPERS) ; do \
++ rm -f $(INSTALL_PREFIX)$(mibdir)/$$i ; \
++ echo "removed $$i from $(INSTALL_PREFIX)$(datadir)/mibs" ; \
++ done
--PREFIX = /usr/local
--ALLDIR = $(PREFIX)/share/snmp/rfc.orig
--INSTDIR = $(PREFIX)/share/snmp/rfc
-+PREFIX = /usr
-+ALLDIR = /var/tmp/rfc.orig
-+INSTDIR = $(PREFIX)/share/snmp/mibs
-
- MIBS = SNMPv2-TC.txt SNMPv2-TM.txt SNMPv2-SMI.txt SNMPv2-MIB.txt \
- SNMPv2-CONF.txt HCNUM-TC.txt INET-ADDRESS-MIB.txt \
-@@ -158,7 +158,7 @@
- RFC1213-MIB.txt: $(MIBDEPS)
- ./mibfetch $(RFCHOST) $(RFCDIR) 1213
-
--SCTP.txt: $(MIBDEPS)
-+SCTP-MIB.txt: $(MIBDEPS)
- ./mibfetch $(RFCHOST) $(RFCDIR) 3873
-
- ianamibs: ianalist
+ installdirs:
+ @$(SHELL) $(srcdir)/../mkinstalldirs $(INSTALL_PREFIX)$(mibdir)
Index: net-snmp-5.4.2.1/Makefile.in
===================================================================
---- net-snmp-5.4.2.1.orig/Makefile.in 2009-11-06 15:03:06.000000000 +0100
-+++ net-snmp-5.4.2.1/Makefile.in 2009-11-06 15:05:53.000000000 +0100
+--- net-snmp-5.4.2.1.orig/Makefile.in 2009-11-06 17:21:05.000000000 +0100
++++ net-snmp-5.4.2.1/Makefile.in 2009-11-06 17:25:10.000000000 +0100
@@ -156,7 +156,7 @@
#
# override LD_RUN_PATH to avoid dependencies on the build directory
Modified: trunk/debian/patches/06_extramibs.patch
===================================================================
--- trunk/debian/patches/06_extramibs.patch 2009-11-06 18:09:35 UTC (rev 294)
+++ trunk/debian/patches/06_extramibs.patch 2009-11-06 18:11:10 UTC (rev 295)
@@ -1,2015 +1,3 @@
-diff -ruN net-snmp-5.4.1.orig/mibs/BGP4-MIB.txt net-snmp-5.4.1/mibs/BGP4-MIB.txt
---- net-snmp-5.4.1.orig/mibs/BGP4-MIB.txt 1970-01-01 01:00:00.000000000 +0100
-+++ net-snmp-5.4.1/mibs/BGP4-MIB.txt 2007-09-20 16:30:52.000000000 +0200
-@@ -0,0 +1,929 @@
-+ BGP4-MIB DEFINITIONS ::= BEGIN
-+
-+ IMPORTS
-+ MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE,
-+ IpAddress, Integer32, Counter32, Gauge32, mib-2
-+ FROM SNMPv2-SMI
-+ MODULE-COMPLIANCE, OBJECT-GROUP, NOTIFICATION-GROUP
-+ FROM SNMPv2-CONF;
-+
-+ bgp MODULE-IDENTITY
-+ LAST-UPDATED "9902100000Z"
-+ ORGANIZATION "IETF IDR Working Group"
-+ CONTACT-INFO "E-mail: idr at merit.net
-+
-+ Susan Hares (Editor)
-+ Merit Network
-+ 4251 Plymouth Road
-+ Suite C
-+ Ann Arbor, MI 48105-2785
-+ Tel: +1 734 936 2095
-+ Fax: +1 734 647 3185
-+ E-mail: skh at merit.edu
-+
-+ Jeff Johnson (Editor)
-+ RedBack Networks, Inc.
-+ 1389 Moffett Park Drive
-+ Sunnyvale, CA 94089-1134
-+ Tel: +1 408 548 3516
-+ Fax: +1 408 548 3599
-+ E-mail: jeff at redback.com"
-+ DESCRIPTION
-+ "The MIB module for BGP-4."
-+ REVISION "9902100000Z"
-+ DESCRIPTION
-+ "Corrected duplicate OBJECT IDENTIFIER
-+ assignment in the conformance information."
-+ REVISION "9601080000Z"
-+ DESCRIPTION
-+ "1) Fixed the definitions of the traps to
-+ make them equivalent to their initial
-+ definition in RFC 1269.
-+ 2) Added compliance and conformance info."
-+ ::= { mib-2 15 }
-+
-+ bgpVersion OBJECT-TYPE
-+ SYNTAX OCTET STRING (SIZE (1..255))
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "Vector of supported BGP protocol version
-+ numbers. Each peer negotiates the version
-+ from this vector. Versions are identified
-+ via the string of bits contained within this
-+ object. The first octet contains bits 0 to
-+ 7, the second octet contains bits 8 to 15,
-+ and so on, with the most significant bit
-+ referring to the lowest bit number in the
-+ octet (e.g., the MSB of the first octet
-+ refers to bit 0). If a bit, i, is present
-+ and set, then the version (i+1) of the BGP
-+ is supported."
-+ ::= { bgp 1 }
-+
-+ bgpLocalAs OBJECT-TYPE
-+ SYNTAX INTEGER (0..65535)
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "The local autonomous system number."
-+ ::= { bgp 2 }
-+
-+
-+
-+ -- BGP Peer table. This table contains, one entry per BGP
-+ -- peer, information about the BGP peer.
-+
-+ bgpPeerTable OBJECT-TYPE
-+ SYNTAX SEQUENCE OF BgpPeerEntry
-+ MAX-ACCESS not-accessible
-+ STATUS current
-+ DESCRIPTION
-+ "BGP peer table. This table contains,
-+ one entry per BGP peer, information about the
-+ connections with BGP peers."
-+ ::= { bgp 3 }
-+
-+ bgpPeerEntry OBJECT-TYPE
-+ SYNTAX BgpPeerEntry
-+ MAX-ACCESS not-accessible
-+ STATUS current
-+ DESCRIPTION
-+ "Entry containing information about the
-+ connection with a BGP peer."
-+ INDEX { bgpPeerRemoteAddr }
-+ ::= { bgpPeerTable 1 }
-+
-+ BgpPeerEntry ::= SEQUENCE {
-+ bgpPeerIdentifier
-+ IpAddress,
-+ bgpPeerState
-+ INTEGER,
-+ bgpPeerAdminStatus
-+ INTEGER,
-+ bgpPeerNegotiatedVersion
-+ Integer32,
-+ bgpPeerLocalAddr
-+ IpAddress,
-+ bgpPeerLocalPort
-+ INTEGER,
-+ bgpPeerRemoteAddr
-+ IpAddress,
-+ bgpPeerRemotePort
-+ INTEGER,
-+ bgpPeerRemoteAs
-+ INTEGER,
-+ bgpPeerInUpdates
-+ Counter32,
-+ bgpPeerOutUpdates
-+ Counter32,
-+ bgpPeerInTotalMessages
-+ Counter32,
-+ bgpPeerOutTotalMessages
-+ Counter32,
-+ bgpPeerLastError
-+ OCTET STRING,
-+ bgpPeerFsmEstablishedTransitions
-+ Counter32,
-+ bgpPeerFsmEstablishedTime
-+ Gauge32,
-+ bgpPeerConnectRetryInterval
-+ INTEGER,
-+ bgpPeerHoldTime
-+ INTEGER,
-+ bgpPeerKeepAlive
-+ INTEGER,
-+ bgpPeerHoldTimeConfigured
-+ INTEGER,
-+ bgpPeerKeepAliveConfigured
-+ INTEGER,
-+ bgpPeerMinASOriginationInterval
-+ INTEGER,
-+ bgpPeerMinRouteAdvertisementInterval
-+ INTEGER,
-+ bgpPeerInUpdateElapsedTime
-+ Gauge32
-+ }
-+
-+ bgpPeerIdentifier OBJECT-TYPE
-+ SYNTAX IpAddress
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "The BGP Identifier of this entry's BGP peer."
-+ ::= { bgpPeerEntry 1 }
-+
-+ bgpPeerState OBJECT-TYPE
-+ SYNTAX INTEGER {
-+ idle(1),
-+ connect(2),
-+ active(3),
-+ opensent(4),
-+ openconfirm(5),
-+ established(6)
-+ }
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "The BGP peer connection state."
-+ ::= { bgpPeerEntry 2 }
-+
-+ bgpPeerAdminStatus OBJECT-TYPE
-+ SYNTAX INTEGER {
-+ stop(1),
-+ start(2)
-+ }
-+ MAX-ACCESS read-write
-+ STATUS current
-+ DESCRIPTION
-+ "The desired state of the BGP connection. A
-+ transition from 'stop' to 'start' will cause
-+ the BGP Start Event to be generated. A
-+ transition from 'start' to 'stop' will cause
-+ the BGP Stop Event to be generated. This
-+ parameter can be used to restart BGP peer
-+ connections. Care should be used in providing
-+ write access to this object without adequate
-+ authentication."
-+ ::= { bgpPeerEntry 3 }
-+
-+ bgpPeerNegotiatedVersion OBJECT-TYPE
-+ SYNTAX Integer32
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "The negotiated version of BGP running between
-+ the two peers."
-+ ::= { bgpPeerEntry 4 }
-+
-+ bgpPeerLocalAddr OBJECT-TYPE
-+ SYNTAX IpAddress
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "The local IP address of this entry's BGP
-+ connection."
-+ ::= { bgpPeerEntry 5 }
-+
-+ bgpPeerLocalPort OBJECT-TYPE
-+ SYNTAX INTEGER (0..65535)
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "The local port for the TCP connection between
-+ the BGP peers."
-+ ::= { bgpPeerEntry 6 }
-+
-+ bgpPeerRemoteAddr OBJECT-TYPE
-+ SYNTAX IpAddress
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "The remote IP address of this entry's BGP
-+ peer."
-+ ::= { bgpPeerEntry 7 }
-+
-+ bgpPeerRemotePort OBJECT-TYPE
-+ SYNTAX INTEGER (0..65535)
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "The remote port for the TCP connection between
-+ the BGP peers. Note that the objects
-+ bgpPeerLocalAddr, bgpPeerLocalPort,
-+ bgpPeerRemoteAddr and bgpPeerRemotePort
-+ provide the appropriate reference to the
-+ standard MIB TCP connection table."
-+ ::= { bgpPeerEntry 8 }
-+
-+ bgpPeerRemoteAs OBJECT-TYPE
-+ SYNTAX INTEGER (0..65535)
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "The remote autonomous system number."
-+ ::= { bgpPeerEntry 9 }
-+
-+ bgpPeerInUpdates OBJECT-TYPE
-+ SYNTAX Counter32
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "The number of BGP UPDATE messages received on
-+ this connection. This object should be
-+ initialized to zero (0) when the connection is
-+ established."
-+ ::= { bgpPeerEntry 10 }
-+
-+ bgpPeerOutUpdates OBJECT-TYPE
-+ SYNTAX Counter32
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "The number of BGP UPDATE messages transmitted
-+ on this connection. This object should be
-+ initialized to zero (0) when the connection is
-+ established."
-+ ::= { bgpPeerEntry 11 }
-+
-+ bgpPeerInTotalMessages OBJECT-TYPE
-+ SYNTAX Counter32
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "The total number of messages received from the
-+ remote peer on this connection. This object
-+ should be initialized to zero when the
-+ connection is established."
-+ ::= { bgpPeerEntry 12 }
-+
-+ bgpPeerOutTotalMessages OBJECT-TYPE
-+ SYNTAX Counter32
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "The total number of messages transmitted to
-+ the remote peer on this connection. This object
-+ should be initialized to zero when the
-+ connection is established."
-+ ::= { bgpPeerEntry 13 }
-+
-+ bgpPeerLastError OBJECT-TYPE
-+ SYNTAX OCTET STRING (SIZE (2))
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "The last error code and subcode seen by this
-+ peer on this connection. If no error has
-+ occurred, this field is zero. Otherwise, the
-+ first byte of this two byte OCTET STRING
-+ contains the error code, and the second byte
-+ contains the subcode."
-+ ::= { bgpPeerEntry 14 }
-+
-+ bgpPeerFsmEstablishedTransitions OBJECT-TYPE
-+ SYNTAX Counter32
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "The total number of times the BGP FSM
-+ transitioned into the established state."
-+ ::= { bgpPeerEntry 15 }
-+
-+ bgpPeerFsmEstablishedTime OBJECT-TYPE
-+ SYNTAX Gauge32
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "This timer indicates how long (in seconds) this
-+ peer has been in the Established state or how long
-+ since this peer was last in the Established state.
-+ It is set to zero when a new peer is configured or
-+ the router is booted."
-+ ::= { bgpPeerEntry 16 }
-+
-+ bgpPeerConnectRetryInterval OBJECT-TYPE
-+ SYNTAX INTEGER (1..65535)
-+ MAX-ACCESS read-write
-+ STATUS current
-+ DESCRIPTION
-+ "Time interval in seconds for the ConnectRetry
-+ timer. The suggested value for this timer is
-+ 120 seconds."
-+ ::= { bgpPeerEntry 17 }
-+
-+ bgpPeerHoldTime OBJECT-TYPE
-+ SYNTAX INTEGER ( 0 | 3..65535 )
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "Time interval in seconds for the Hold Timer
-+ established with the peer. The value of this
-+ object is calculated by this BGP speaker by
-+ using the smaller of the value in
-+ bgpPeerHoldTimeConfigured and the Hold Time
-+ received in the OPEN message. This value
-+ must be at lease three seconds if it is not
-+ zero (0) in which case the Hold Timer has
-+ not been established with the peer, or, the
-+ value of bgpPeerHoldTimeConfigured is zero (0)."
-+ ::= { bgpPeerEntry 18 }
-+
-+ bgpPeerKeepAlive OBJECT-TYPE
-+ SYNTAX INTEGER ( 0 | 1..21845 )
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "Time interval in seconds for the KeepAlive
-+ timer established with the peer. The value of
-+ this object is calculated by this BGP speaker
-+ such that, when compared with bgpPeerHoldTime,
-+ it has the same proportion as what
-+ bgpPeerKeepAliveConfigured has when compared
-+ with bgpPeerHoldTimeConfigured. If the value
-+ of this object is zero (0), it indicates that
-+ the KeepAlive timer has not been established
-+ with the peer, or, the value of
-+ bgpPeerKeepAliveConfigured is zero (0)."
-+ ::= { bgpPeerEntry 19 }
-+
-+ bgpPeerHoldTimeConfigured OBJECT-TYPE
-+ SYNTAX INTEGER ( 0 | 3..65535 )
-+ MAX-ACCESS read-write
-+ STATUS current
-+ DESCRIPTION
-+ "Time interval in seconds for the Hold Time
-+ configured for this BGP speaker with this peer.
-+ This value is placed in an OPEN message sent to
-+ this peer by this BGP speaker, and is compared
-+ with the Hold Time field in an OPEN message
-+ received from the peer when determining the Hold
-+ Time (bgpPeerHoldTime) with the peer. This value
-+ must not be less than three seconds if it is not
-+ zero (0) in which case the Hold Time is NOT to be
-+ established with the peer. The suggested value for
-+ this timer is 90 seconds."
-+ ::= { bgpPeerEntry 20 }
-+
-+ bgpPeerKeepAliveConfigured OBJECT-TYPE
-+ SYNTAX INTEGER ( 0 | 1..21845 )
-+ MAX-ACCESS read-write
-+ STATUS current
-+ DESCRIPTION
-+ "Time interval in seconds for the KeepAlive timer
-+ configured for this BGP speaker with this peer.
-+ The value of this object will only determine the
-+ KEEPALIVE messages' frequency relative to the value
-+ specified in bgpPeerHoldTimeConfigured; the actual
-+ time interval for the KEEPALIVE messages is
-+ indicated by bgpPeerKeepAlive. A reasonable
-+ maximum value for this timer would be configured to
-+ be one third of that of bgpPeerHoldTimeConfigured.
-+ If the value of this object is zero (0), no
-+ periodical KEEPALIVE messages are sent to the peer
-+ after the BGP connection has been established. The
-+ suggested value for this timer is 30 seconds."
-+ ::= { bgpPeerEntry 21 }
-+
-+ bgpPeerMinASOriginationInterval OBJECT-TYPE
-+ SYNTAX INTEGER (1..65535)
-+ MAX-ACCESS read-write
-+ STATUS current
-+ DESCRIPTION
-+ "Time interval in seconds for the
-+ MinASOriginationInterval timer.
-+ The suggested value for this timer is 15 seconds."
-+ ::= { bgpPeerEntry 22 }
-+
-+ bgpPeerMinRouteAdvertisementInterval OBJECT-TYPE
-+ SYNTAX INTEGER (1..65535)
-+ MAX-ACCESS read-write
-+ STATUS current
-+ DESCRIPTION
-+ "Time interval in seconds for the
-+ MinRouteAdvertisementInterval timer.
-+ The suggested value for this timer is 30 seconds."
-+ ::= { bgpPeerEntry 23 }
-+
-+ bgpPeerInUpdateElapsedTime OBJECT-TYPE
-+ SYNTAX Gauge32
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "Elapsed time in seconds since the last BGP
-+ UPDATE message was received from the peer.
-+ Each time bgpPeerInUpdates is incremented,
-+ the value of this object is set to zero (0)."
-+ ::= { bgpPeerEntry 24 }
-+
-+
-+
-+ bgpIdentifier OBJECT-TYPE
-+ SYNTAX IpAddress
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "The BGP Identifier of local system."
-+ ::= { bgp 4 }
-+
-+
-+
-+ -- Received Path Attribute Table. This table contains,
-+ -- one entry per path to a network, path attributes
-+ -- received from all peers running BGP version 3 or less.
-+ -- This table is obsolete, having been replaced in
-+ -- functionality with the bgp4PathAttrTable.
-+
-+ bgpRcvdPathAttrTable OBJECT-TYPE
-+ SYNTAX SEQUENCE OF BgpPathAttrEntry
-+ MAX-ACCESS not-accessible
-+ STATUS obsolete
-+ DESCRIPTION
-+ "The BGP Received Path Attribute Table contains
-+ information about paths to destination networks
-+ received from all peers running BGP version 3 or
-+ less."
-+ ::= { bgp 5 }
-+
-+ bgpPathAttrEntry OBJECT-TYPE
-+ SYNTAX BgpPathAttrEntry
-+ MAX-ACCESS not-accessible
-+ STATUS obsolete
-+ DESCRIPTION
-+ "Information about a path to a network."
-+ INDEX { bgpPathAttrDestNetwork,
-+ bgpPathAttrPeer }
-+ ::= { bgpRcvdPathAttrTable 1 }
-+
-+ BgpPathAttrEntry ::= SEQUENCE {
-+ bgpPathAttrPeer
-+ IpAddress,
-+ bgpPathAttrDestNetwork
-+ IpAddress,
-+ bgpPathAttrOrigin
-+ INTEGER,
-+ bgpPathAttrASPath
-+ OCTET STRING,
-+ bgpPathAttrNextHop
-+ IpAddress,
-+ bgpPathAttrInterASMetric
-+ Integer32
-+ }
-+
-+ bgpPathAttrPeer OBJECT-TYPE
-+ SYNTAX IpAddress
-+ MAX-ACCESS read-only
-+ STATUS obsolete
-+ DESCRIPTION
-+ "The IP address of the peer where the path
-+ information was learned."
-+ ::= { bgpPathAttrEntry 1 }
-+
-+ bgpPathAttrDestNetwork OBJECT-TYPE
-+ SYNTAX IpAddress
-+ MAX-ACCESS read-only
-+ STATUS obsolete
-+ DESCRIPTION
-+ "The address of the destination network."
-+ ::= { bgpPathAttrEntry 2 }
-+
-+ bgpPathAttrOrigin OBJECT-TYPE
-+ SYNTAX INTEGER {
-+ igp(1),-- networks are interior
-+ egp(2),-- networks learned via EGP
-+ incomplete(3) -- undetermined
-+ }
-+ MAX-ACCESS read-only
-+ STATUS obsolete
-+ DESCRIPTION
-+ "The ultimate origin of the path information."
-+ ::= { bgpPathAttrEntry 3 }
-+
-+ bgpPathAttrASPath OBJECT-TYPE
-+ SYNTAX OCTET STRING (SIZE (2..255))
-+ MAX-ACCESS read-only
-+ STATUS obsolete
-+ DESCRIPTION
-+ "The set of ASs that must be traversed to reach
-+ the network. This object is probably best
-+ represented as SEQUENCE OF INTEGER. For SMI
-+ compatibility, though, it is represented as
-+ OCTET STRING. Each AS is represented as a pair
-+ of octets according to the following algorithm:
-+
-+ first-byte-of-pair = ASNumber / 256;
-+ second-byte-of-pair = ASNumber & 255;"
-+ ::= { bgpPathAttrEntry 4 }
-+
-+ bgpPathAttrNextHop OBJECT-TYPE
-+ SYNTAX IpAddress
-+ MAX-ACCESS read-only
-+ STATUS obsolete
-+ DESCRIPTION
-+ "The address of the border router that should
-+ be used for the destination network."
-+ ::= { bgpPathAttrEntry 5 }
-+
-+ bgpPathAttrInterASMetric OBJECT-TYPE
-+ SYNTAX Integer32
-+ MAX-ACCESS read-only
-+ STATUS obsolete
-+ DESCRIPTION
-+ "The optional inter-AS metric. If this
-+ attribute has not been provided for this route,
-+ the value for this object is 0."
-+ ::= { bgpPathAttrEntry 6 }
-+
-+
-+
-+ -- BGP-4 Received Path Attribute Table. This table contains,
-+ -- one entry per path to a network, path attributes
-+ -- received from all peers running BGP-4.
-+
-+ bgp4PathAttrTable OBJECT-TYPE
-+ SYNTAX SEQUENCE OF Bgp4PathAttrEntry
-+ MAX-ACCESS not-accessible
-+ STATUS current
-+ DESCRIPTION
-+ "The BGP-4 Received Path Attribute Table contains
-+ information about paths to destination networks
-+ received from all BGP4 peers."
-+ ::= { bgp 6 }
-+
-+ bgp4PathAttrEntry OBJECT-TYPE
-+ SYNTAX Bgp4PathAttrEntry
-+ MAX-ACCESS not-accessible
-+ STATUS current
-+ DESCRIPTION
-+ "Information about a path to a network."
-+ INDEX { bgp4PathAttrIpAddrPrefix,
-+ bgp4PathAttrIpAddrPrefixLen,
-+ bgp4PathAttrPeer }
-+ ::= { bgp4PathAttrTable 1 }
-+
-+ Bgp4PathAttrEntry ::= SEQUENCE {
-+ bgp4PathAttrPeer
-+ IpAddress,
-+ bgp4PathAttrIpAddrPrefixLen
-+ INTEGER,
-+ bgp4PathAttrIpAddrPrefix
-+ IpAddress,
-+ bgp4PathAttrOrigin
-+ INTEGER,
-+ bgp4PathAttrASPathSegment
-+ OCTET STRING,
-+ bgp4PathAttrNextHop
-+ IpAddress,
-+ bgp4PathAttrMultiExitDisc
-+ INTEGER,
-+ bgp4PathAttrLocalPref
-+ INTEGER,
-+ bgp4PathAttrAtomicAggregate
-+ INTEGER,
-+ bgp4PathAttrAggregatorAS
-+ INTEGER,
-+ bgp4PathAttrAggregatorAddr
-+ IpAddress,
-+ bgp4PathAttrCalcLocalPref
-+ INTEGER,
-+ bgp4PathAttrBest
-+ INTEGER,
-+ bgp4PathAttrUnknown
-+ OCTET STRING
-+ }
-+
-+ bgp4PathAttrPeer OBJECT-TYPE
-+ SYNTAX IpAddress
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "The IP address of the peer where the path
-+ information was learned."
-+ ::= { bgp4PathAttrEntry 1 }
-+ bgp4PathAttrIpAddrPrefixLen OBJECT-TYPE
-+ SYNTAX INTEGER (0..32)
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "Length in bits of the IP address prefix in the
-+ Network Layer Reachability Information field."
-+ ::= { bgp4PathAttrEntry 2 }
-+
-+ bgp4PathAttrIpAddrPrefix OBJECT-TYPE
-+ SYNTAX IpAddress
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "An IP address prefix in the Network Layer
-+ Reachability Information field. This object
-+ is an IP address containing the prefix with
-+ length specified by bgp4PathAttrIpAddrPrefixLen.
-+ Any bits beyond the length specified by
-+ bgp4PathAttrIpAddrPrefixLen are zeroed."
-+ ::= { bgp4PathAttrEntry 3 }
-+
-+ bgp4PathAttrOrigin OBJECT-TYPE
-+ SYNTAX INTEGER {
-+ igp(1),-- networks are interior
-+ egp(2),-- networks learned via EGP
-+ incomplete(3) -- undetermined
-+ }
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "The ultimate origin of the path information."
-+ ::= { bgp4PathAttrEntry 4 }
-+
-+ bgp4PathAttrASPathSegment OBJECT-TYPE
-+ SYNTAX OCTET STRING (SIZE (2..255))
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "The sequence of AS path segments. Each AS
-+ path segment is represented by a triple
-+ <type, length, value>.
-+
-+ The type is a 1-octet field which has two
-+ possible values:
-+ 1 AS_SET: unordered set of ASs a
-+ route in the UPDATE message
-+ has traversed
-+ 2 AS_SEQUENCE: ordered set of ASs
-+ a route in the UPDATE message
-+ has traversed.
-+
-+ The length is a 1-octet field containing the
-+ number of ASs in the value field.
-+
-+ The value field contains one or more AS
-+ numbers, each AS is represented in the octet
-+ string as a pair of octets according to the
-+ following algorithm:
-+
-+ first-byte-of-pair = ASNumber / 256;
-+ second-byte-of-pair = ASNumber & 255;"
-+ ::= { bgp4PathAttrEntry 5 }
-+
-+ bgp4PathAttrNextHop OBJECT-TYPE
-+ SYNTAX IpAddress
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "The address of the border router that should
-+ be used for the destination network."
-+ ::= { bgp4PathAttrEntry 6 }
-+
-+ bgp4PathAttrMultiExitDisc OBJECT-TYPE
-+ SYNTAX INTEGER (-1..2147483647)
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "This metric is used to discriminate between
-+ multiple exit points to an adjacent autonomous
-+ system. A value of -1 indicates the absence of
-+ this attribute."
-+ ::= { bgp4PathAttrEntry 7 }
-+
-+ bgp4PathAttrLocalPref OBJECT-TYPE
-+ SYNTAX INTEGER (-1..2147483647)
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "The originating BGP4 speaker's degree of
-+ preference for an advertised route. A value of
-+ -1 indicates the absence of this attribute."
-+ ::= { bgp4PathAttrEntry 8 }
-+
-+ bgp4PathAttrAtomicAggregate OBJECT-TYPE
-+ SYNTAX INTEGER {
-+ lessSpecificRrouteNotSelected(1),
-+ lessSpecificRouteSelected(2)
-+ }
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "Whether or not a system has selected
-+ a less specific route without selecting a
-+ more specific route."
-+ ::= { bgp4PathAttrEntry 9 }
-+
-+ bgp4PathAttrAggregatorAS OBJECT-TYPE
-+ SYNTAX INTEGER (0..65535)
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "The AS number of the last BGP4 speaker that
-+ performed route aggregation. A value of zero (0)
-+ indicates the absence of this attribute."
-+ ::= { bgp4PathAttrEntry 10 }
-+
-+ bgp4PathAttrAggregatorAddr OBJECT-TYPE
-+ SYNTAX IpAddress
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "The IP address of the last BGP4 speaker that
-+ performed route aggregation. A value of
-+ 0.0.0.0 indicates the absence of this attribute."
-+ ::= { bgp4PathAttrEntry 11 }
-+
-+ bgp4PathAttrCalcLocalPref OBJECT-TYPE
-+ SYNTAX INTEGER (-1..2147483647)
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "The degree of preference calculated by the
-+ receiving BGP4 speaker for an advertised route.
-+ A value of -1 indicates the absence of this
-+ attribute."
-+ ::= { bgp4PathAttrEntry 12 }
-+
-+ bgp4PathAttrBest OBJECT-TYPE
-+ SYNTAX INTEGER {
-+ false(1),-- not chosen as best route
-+ true(2) -- chosen as best route
-+ }
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "An indication of whether or not this route
-+ was chosen as the best BGP4 route."
-+ ::= { bgp4PathAttrEntry 13 }
-+
-+ bgp4PathAttrUnknown OBJECT-TYPE
-+ SYNTAX OCTET STRING (SIZE(0..255))
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "One or more path attributes not understood
-+ by this BGP4 speaker. Size zero (0) indicates
-+ the absence of such attribute(s). Octets
-+ beyond the maximum size, if any, are not
-+ recorded by this object."
-+ ::= { bgp4PathAttrEntry 14 }
-+
-+
-+ -- Traps.
-+
-+ -- note that in RFC 1657, bgpTraps was incorrectly
-+ -- assigned a value of { bgp 7 }, and each of the
-+ -- traps had the bgpPeerRemoteAddr object inappropriately
-+ -- removed from their OBJECTS clause. The following
-+ -- definitions restore the semantics of the traps as
-+ -- they were initially defined in RFC 1269.
-+
-+ -- { bgp 7 } is unused
-+
-+ bgpTraps OBJECT IDENTIFIER ::= { bgp 0 }
-+
-+ bgpEstablished NOTIFICATION-TYPE
-+ OBJECTS { bgpPeerRemoteAddr,
-+ bgpPeerLastError,
-+ bgpPeerState }
-+ STATUS current
-+ DESCRIPTION
-+ "The BGP Established event is generated when
-+ the BGP FSM enters the ESTABLISHED state."
-+ ::= { bgpTraps 1 }
-+
-+ bgpBackwardTransition NOTIFICATION-TYPE
-+ OBJECTS { bgpPeerRemoteAddr,
-+ bgpPeerLastError,
-+ bgpPeerState }
-+ STATUS current
-+ DESCRIPTION
-+ "The BGPBackwardTransition Event is generated
-+ when the BGP FSM moves from a higher numbered
-+ state to a lower numbered state."
-+ ::= { bgpTraps 2 }
-+
-+ -- conformance information
-+
-+ bgpMIBConformance OBJECT IDENTIFIER ::= { bgp 8 }
-+ bgpMIBCompliances OBJECT IDENTIFIER ::= { bgpMIBConformance 1 }
-+ bgpMIBGroups OBJECT IDENTIFIER ::= { bgpMIBConformance 2 }
-+
-+ -- compliance statements
-+
-+ bgpMIBCompliance MODULE-COMPLIANCE
-+ STATUS current
-+ DESCRIPTION
-+ "The compliance statement for entities which
-+ implement the BGP4 mib."
-+ MODULE -- this module
-+ MANDATORY-GROUPS { bgp4MIBGlobalsGroup,
-+ bgp4MIBPeerGroup,
-+ bgp4MIBPathAttrGroup,
-+ bgp4MIBNotificationGroup }
-+ ::= { bgpMIBCompliances 1 }
-+
-+ -- units of conformance
-+
-+ bgp4MIBGlobalsGroup OBJECT-GROUP
-+ OBJECTS { bgpVersion,
-+ bgpLocalAs,
-+ bgpIdentifier }
-+ STATUS current
-+ DESCRIPTION
-+ "A collection of objects providing information
-+ on global BGP state."
-+ ::= { bgpMIBGroups 1 }
-+
-+ bgp4MIBPeerGroup OBJECT-GROUP
-+ OBJECTS { bgpPeerIdentifier,
-+ bgpPeerState,
-+ bgpPeerAdminStatus,
-+ bgpPeerNegotiatedVersion,
-+ bgpPeerLocalAddr,
-+ bgpPeerLocalPort,
-+ bgpPeerRemoteAddr,
-+ bgpPeerRemotePort,
-+ bgpPeerRemoteAs,
-+ bgpPeerInUpdates,
-+ bgpPeerOutUpdates,
-+ bgpPeerInTotalMessages,
-+ bgpPeerOutTotalMessages,
-+ bgpPeerLastError,
-+ bgpPeerFsmEstablishedTransitions,
-+ bgpPeerFsmEstablishedTime,
-+ bgpPeerConnectRetryInterval,
-+ bgpPeerHoldTime,
-+ bgpPeerKeepAlive,
-+ bgpPeerHoldTimeConfigured,
-+ bgpPeerKeepAliveConfigured,
-+ bgpPeerMinASOriginationInterval,
-+ bgpPeerMinRouteAdvertisementInterval,
-+ bgpPeerInUpdateElapsedTime }
-+ STATUS current
-+ DESCRIPTION
-+ "A collection of objects for managing
-+ BGP peers."
-+ ::= { bgpMIBGroups 2 }
-+
-+ bgp4MIBRcvdPathAttrGroup OBJECT-GROUP
-+ OBJECTS { bgpPathAttrPeer,
-+ bgpPathAttrDestNetwork,
-+ bgpPathAttrOrigin,
-+ bgpPathAttrASPath,
-+ bgpPathAttrNextHop,
-+ bgpPathAttrInterASMetric }
-+ STATUS obsolete
-+ DESCRIPTION
-+ "A collection of objects for managing BGP
-+ path entries.
-+
-+ This conformance group is obsolete,
-+ replaced by bgp4MIBPathAttrGroup."
-+ ::= { bgpMIBGroups 3 }
-+
-+ bgp4MIBPathAttrGroup OBJECT-GROUP
-+ OBJECTS { bgp4PathAttrPeer,
-+ bgp4PathAttrIpAddrPrefixLen,
-+ bgp4PathAttrIpAddrPrefix,
-+ bgp4PathAttrOrigin,
-+ bgp4PathAttrASPathSegment,
-+ bgp4PathAttrNextHop,
-+ bgp4PathAttrMultiExitDisc,
-+ bgp4PathAttrLocalPref,
-+ bgp4PathAttrAtomicAggregate,
-+ bgp4PathAttrAggregatorAS,
-+ bgp4PathAttrAggregatorAddr,
-+ bgp4PathAttrCalcLocalPref,
-+ bgp4PathAttrBest,
-+ bgp4PathAttrUnknown }
-+ STATUS current
-+ DESCRIPTION
-+ "A collection of objects for managing
-+ BGP path entries."
-+ ::= { bgpMIBGroups 4 }
-+
-+ bgp4MIBNotificationGroup NOTIFICATION-GROUP
-+ NOTIFICATIONS { bgpEstablished,
-+ bgpBackwardTransition }
-+ STATUS current
-+ DESCRIPTION
-+ "A collection of notifications for signaling
-+ changes in BGP peer relationships."
-+ ::= { bgpMIBGroups 5 }
-+
-+ END
-diff -ruN net-snmp-5.4.1.orig/mibs/BRIDGE-MIB.txt net-snmp-5.4.1/mibs/BRIDGE-MIB.txt
---- net-snmp-5.4.1.orig/mibs/BRIDGE-MIB.txt 1970-01-01 01:00:00.000000000 +0100
-+++ net-snmp-5.4.1/mibs/BRIDGE-MIB.txt 2007-09-20 16:30:52.000000000 +0200
-@@ -0,0 +1,1075 @@
-+BRIDGE-MIB DEFINITIONS ::= BEGIN
-+
-+IMPORTS
-+ Counter, TimeTicks
-+ FROM RFC1155-SMI
-+ mib-2
-+ FROM RFC1213-MIB
-+ OBJECT-TYPE
-+ FROM RFC-1212
-+ TRAP-TYPE
-+ FROM RFC-1215;
-+
-+-- All representations of MAC addresses in this MIB Module
-+-- use, as a textual convention (i.e. this convention does
-+-- not affect their encoding), the data type:
-+MacAddress ::= OCTET STRING (SIZE (6)) -- a 6 octet address
-+ -- in the
-+ -- "canonical"
-+ -- order
-+-- defined by IEEE 802.1a, i.e., as if it were transmitted
-+-- least significant bit first, even though 802.5 (in
-+-- contrast to other n802.x protocols) requires MAC
-+-- addresses to be transmitted most significant bit first.
-+--
-+-- 16-bit addresses, if needed, are represented by setting
-+-- their upper 4 octets to all 0's, i.e., AAFF would be
-+-- represented as 00000000AAFF.
-+
-+-- Similarly, all representations of Bridge-Id in this MIB
-+-- Module use, as a textual convention (i.e. this
-+-- convention does not affect their encoding), the data
-+-- type:
-+BridgeId ::= OCTET STRING (SIZE (8)) -- the
-+ -- Bridge-Identifier
-+ -- as used in the
-+ -- Spanning Tree
-+-- Protocol to uniquely identify a bridge. Its first two
-+-- octets (in network byte order) contain a priority
-+-- value and its last 6 octets contain the MAC address
-+-- used to refer to a bridge in a unique fashion
-+-- (typically, the numerically smallest MAC address
-+-- of all ports on the bridge).
-+
-+-- Several objects in this MIB module represent values of
-+-- timers used by the Spanning Tree Protocol. In this
-+-- MIB, these timers have values in units of hundreths of
-+-- a second (i.e. 1/100 secs).
-+-- These timers, when stored in a Spanning Tree Protocol's
-+-- BPDU, are in units of 1/256 seconds. Note, however,
-+-- that 802.1D-1990 specifies a settable granularity of
-+-- no more than 1 second for these timers. To avoid
-+-- ambiguity, a data type is defined here as a textual
-+-- convention and all representation of these timers
-+-- in this MIB module are defined using this data type. An
-+-- algorithm is also defined for converting between the
-+-- different units, to ensure a timer's value is not
-+-- distorted by multiple conversions.
-+-- The data type is:
-+
-+Timeout ::= INTEGER -- a STP timer in units of 1/100 seconds
-+
-+-- To convert a Timeout value into a value in units of
-+-- 1/256 seconds, the following algorithm should be used:
-+--
-+-- b = floor( (n * 256) / 100)
-+--
-+-- where:
-+-- floor = quotient [ignore remainder]
-+-- n is the value in 1/100 second units
-+-- b is the value in 1/256 second units
-+--
-+-- To convert the value from 1/256 second units back to
-+-- 1/100 seconds, the following algorithm should be used:
-+--
-+-- n = ceiling( (b * 100) / 256)
-+--
-+-- where:
-+-- ceiling = quotient [if remainder is 0], or
-+-- quotient + 1 [if remainder is non-zero]
-+-- n is the value in 1/100 second units
-+-- b is the value in 1/256 second units
-+--
-+-- Note: it is important that the arithmetic operations are
-+-- done in the order specified (i.e., multiply first, divide
-+-- second).
-+
-+ dot1dBridge OBJECT IDENTIFIER ::= { mib-2 17 }
-+
-+-- groups in the Bridge MIB
-+
-+dot1dBase OBJECT IDENTIFIER ::= { dot1dBridge 1 }
-+
-+dot1dStp OBJECT IDENTIFIER ::= { dot1dBridge 2 }
-+
-+dot1dSr OBJECT IDENTIFIER ::= { dot1dBridge 3 }
-+-- separately documented
-+
-+dot1dTp OBJECT IDENTIFIER ::= { dot1dBridge 4 }
-+
-+dot1dStatic OBJECT IDENTIFIER ::= { dot1dBridge 5 }
-+
-+-- the dot1dBase group
-+
-+-- Implementation of the dot1dBase group is mandatory for all
-+-- bridges.
-+
-+dot1dBaseBridgeAddress OBJECT-TYPE
-+ SYNTAX MacAddress
-+ ACCESS read-only
-+ STATUS mandatory
-+ DESCRIPTION
-+ "The MAC address used by this bridge when it must
-+ be referred to in a unique fashion. It is
-+ recommended that this be the numerically smallest
-+ MAC address of all ports that belong to this
-+ bridge. However it is only required to be unique.
-+ When concatenated with dot1dStpPriority a unique
-+ BridgeIdentifier is formed which is used in the
-+ Spanning Tree Protocol."
-+ REFERENCE
-+ "IEEE 802.1D-1990: Sections 6.4.1.1.3 and 3.12.5"
-+ ::= { dot1dBase 1 }
-+
-+dot1dBaseNumPorts OBJECT-TYPE
-+ SYNTAX INTEGER
-+ ACCESS read-only
-+ STATUS mandatory
-+ DESCRIPTION
-+ "The number of ports controlled by this bridging
-+ entity."
-+ REFERENCE
-+ "IEEE 802.1D-1990: Section 6.4.1.1.3"
-+ ::= { dot1dBase 2 }
-+
-+dot1dBaseType OBJECT-TYPE
-+ SYNTAX INTEGER {
-+ unknown(1),
-+ transparent-only(2),
-+ sourceroute-only(3),
-+ srt(4)
-+ }
-+ ACCESS read-only
-+ STATUS mandatory
-+ DESCRIPTION
-+ "Indicates what type of bridging this bridge can
-+ perform. If a bridge is actually performing a
-+ certain type of bridging this will be indicated by
-+ entries in the port table for the given type."
-+ ::= { dot1dBase 3 }
-+
-+-- The Generic Bridge Port Table
-+
-+dot1dBasePortTable OBJECT-TYPE
-+ SYNTAX SEQUENCE OF Dot1dBasePortEntry
-+ ACCESS not-accessible
-+ STATUS mandatory
-+ DESCRIPTION
-+ "A table that contains generic information about
-+ every port that is associated with this bridge.
-+ Transparent, source-route, and srt ports are
-+ included."
-+ ::= { dot1dBase 4 }
-+
-+dot1dBasePortEntry OBJECT-TYPE
-+ SYNTAX Dot1dBasePortEntry
-+ ACCESS not-accessible
-+ STATUS mandatory
-+ DESCRIPTION
-+ "A list of information for each port of the
-+ bridge."
-+ REFERENCE
-+ "IEEE 802.1D-1990: Section 6.4.2, 6.6.1"
-+ INDEX { dot1dBasePort }
-+ ::= { dot1dBasePortTable 1 }
-+
-+Dot1dBasePortEntry ::=
-+ SEQUENCE {
-+ dot1dBasePort
-+ INTEGER,
-+ dot1dBasePortIfIndex
-+ INTEGER,
-+ dot1dBasePortCircuit
-+
-+ OBJECT IDENTIFIER,
-+ dot1dBasePortDelayExceededDiscards
-+ Counter,
-+ dot1dBasePortMtuExceededDiscards
-+ Counter
-+ }
-+
-+dot1dBasePort OBJECT-TYPE
-+ SYNTAX INTEGER (1..65535)
-+ ACCESS read-only
-+ STATUS mandatory
-+ DESCRIPTION
-+ "The port number of the port for which this entry
-+ contains bridge management information."
-+ ::= { dot1dBasePortEntry 1 }
-+
-+dot1dBasePortIfIndex OBJECT-TYPE
-+ SYNTAX INTEGER
-+ ACCESS read-only
-+ STATUS mandatory
-+ DESCRIPTION
-+ "The value of the instance of the ifIndex object,
-+ defined in MIB-II, for the interface corresponding
-+ to this port."
-+ ::= { dot1dBasePortEntry 2 }
-+
-+dot1dBasePortCircuit OBJECT-TYPE
-+ SYNTAX OBJECT IDENTIFIER
-+ ACCESS read-only
-+ STATUS mandatory
-+ DESCRIPTION
-+ "For a port which (potentially) has the same value
-+ of dot1dBasePortIfIndex as another port on the
-+ same bridge, this object contains the name of an
-+ object instance unique to this port. For example,
-+ in the case where multiple ports correspond one-
-+ to-one with multiple X.25 virtual circuits, this
-+ value might identify an (e.g., the first) object
-+ instance associated with the X.25 virtual circuit
-+ corresponding to this port.
-+
-+ For a port which has a unique value of
-+ dot1dBasePortIfIndex, this object can have the
-+ value { 0 0 }."
-+ ::= { dot1dBasePortEntry 3 }
-+
-+dot1dBasePortDelayExceededDiscards OBJECT-TYPE
-+ SYNTAX Counter
-+
-+ ACCESS read-only
-+ STATUS mandatory
-+ DESCRIPTION
-+ "The number of frames discarded by this port due
-+ to excessive transit delay through the bridge. It
-+ is incremented by both transparent and source
-+ route bridges."
-+ REFERENCE
-+ "IEEE 802.1D-1990: Section 6.6.1.1.3"
-+ ::= { dot1dBasePortEntry 4 }
-+
-+dot1dBasePortMtuExceededDiscards OBJECT-TYPE
-+ SYNTAX Counter
-+ ACCESS read-only
-+ STATUS mandatory
-+ DESCRIPTION
-+ "The number of frames discarded by this port due
-+ to an excessive size. It is incremented by both
-+ transparent and source route bridges."
-+ REFERENCE
-+ "IEEE 802.1D-1990: Section 6.6.1.1.3"
-+ ::= { dot1dBasePortEntry 5 }
-+
-+-- the dot1dStp group
-+
-+-- Implementation of the dot1dStp group is optional. It is
-+-- implemented by those bridges that support the Spanning Tree
-+-- Protocol.
-+
-+dot1dStpProtocolSpecification OBJECT-TYPE
-+ SYNTAX INTEGER {
-+ unknown(1),
-+ decLb100(2),
-+ ieee8021d(3)
-+ }
-+ ACCESS read-only
-+ STATUS mandatory
-+ DESCRIPTION
-+ "An indication of what version of the Spanning
-+ Tree Protocol is being run. The value
-+ 'decLb100(2)' indicates the DEC LANbridge 100
-+ Spanning Tree protocol. IEEE 802.1d
-+ implementations will return 'ieee8021d(3)'. If
-+ future versions of the IEEE Spanning Tree Protocol
-+ are released that are incompatible with the
-+ current version a new value will be defined."
-+
-+ ::= { dot1dStp 1 }
-+
-+dot1dStpPriority OBJECT-TYPE
-+ SYNTAX INTEGER (0..65535)
-+ ACCESS read-write
-+ STATUS mandatory
-+ DESCRIPTION
-+ "The value of the write-able portion of the Bridge
-+ ID, i.e., the first two octets of the (8 octet
-+ long) Bridge ID. The other (last) 6 octets of the
-+ Bridge ID are given by the value of
-+ dot1dBaseBridgeAddress."
-+ REFERENCE
-+ "IEEE 802.1D-1990: Section 4.5.3.7"
-+ ::= { dot1dStp 2 }
-+
-+dot1dStpTimeSinceTopologyChange OBJECT-TYPE
-+ SYNTAX TimeTicks
-+ ACCESS read-only
-+ STATUS mandatory
-+ DESCRIPTION
-+ "The time (in hundredths of a second) since the
-+ last time a topology change was detected by the
-+ bridge entity."
-+ REFERENCE
-+ "IEEE 802.1D-1990: Section 6.8.1.1.3"
-+ ::= { dot1dStp 3 }
-+
-+dot1dStpTopChanges OBJECT-TYPE
-+ SYNTAX Counter
-+ ACCESS read-only
-+ STATUS mandatory
-+ DESCRIPTION
-+ "The total number of topology changes detected by
-+ this bridge since the management entity was last
-+ reset or initialized."
-+ REFERENCE
-+ "IEEE 802.1D-1990: Section 6.8.1.1.3"
-+ ::= { dot1dStp 4 }
-+
-+dot1dStpDesignatedRoot OBJECT-TYPE
-+ SYNTAX BridgeId
-+ ACCESS read-only
-+ STATUS mandatory
-+ DESCRIPTION
-+ "The bridge identifier of the root of the spanning
-+ tree as determined by the Spanning Tree Protocol
-+ as executed by this node. This value is used as
-+
-+ the Root Identifier parameter in all Configuration
-+ Bridge PDUs originated by this node."
-+ REFERENCE
-+ "IEEE 802.1D-1990: Section 4.5.3.1"
-+ ::= { dot1dStp 5 }
-+
-+dot1dStpRootCost OBJECT-TYPE
-+ SYNTAX INTEGER
-+ ACCESS read-only
-+ STATUS mandatory
-+ DESCRIPTION
-+ "The cost of the path to the root as seen from
-+ this bridge."
-+ REFERENCE
-+ "IEEE 802.1D-1990: Section 4.5.3.2"
-+ ::= { dot1dStp 6 }
-+
-+dot1dStpRootPort OBJECT-TYPE
-+ SYNTAX INTEGER
-+ ACCESS read-only
-+ STATUS mandatory
-+ DESCRIPTION
-+ "The port number of the port which offers the
-+ lowest cost path from this bridge to the root
-+ bridge."
-+ REFERENCE
-+ "IEEE 802.1D-1990: Section 4.5.3.3"
-+ ::= { dot1dStp 7 }
-+
-+dot1dStpMaxAge OBJECT-TYPE
-+ SYNTAX Timeout
-+ ACCESS read-only
-+ STATUS mandatory
-+ DESCRIPTION
-+ "The maximum age of Spanning Tree Protocol
-+ information learned from the network on any port
-+ before it is discarded, in units of hundredths of
-+ a second. This is the actual value that this
-+ bridge is currently using."
-+ REFERENCE
-+ "IEEE 802.1D-1990: Section 4.5.3.4"
-+ ::= { dot1dStp 8 }
-+
-+dot1dStpHelloTime OBJECT-TYPE
-+ SYNTAX Timeout
-+ ACCESS read-only
-+ STATUS mandatory
-+ DESCRIPTION
-+
-+ "The amount of time between the transmission of
-+ Configuration bridge PDUs by this node on any port
-+ when it is the root of the spanning tree or trying
-+ to become so, in units of hundredths of a second.
-+ This is the actual value that this bridge is
-+ currently using."
-+ REFERENCE
-+ "IEEE 802.1D-1990: Section 4.5.3.5"
-+ ::= { dot1dStp 9 }
-+
-+dot1dStpHoldTime OBJECT-TYPE
-+ SYNTAX INTEGER
-+ ACCESS read-only
-+ STATUS mandatory
-+ DESCRIPTION
-+ "This time value determines the interval length
-+ during which no more than two Configuration bridge
-+ PDUs shall be transmitted by this node, in units
-+ of hundredths of a second."
-+ REFERENCE
-+ "IEEE 802.1D-1990: Section 4.5.3.14"
-+ ::= { dot1dStp 10 }
-+
-+dot1dStpForwardDelay OBJECT-TYPE
-+ SYNTAX Timeout
-+ ACCESS read-only
-+ STATUS mandatory
-+ DESCRIPTION
-+ "This time value, measured in units of hundredths
-+ of a second, controls how fast a port changes its
-+ spanning state when moving towards the Forwarding
-+ state. The value determines how long the port
-+ stays in each of the Listening and Learning
-+ states, which precede the Forwarding state. This
-+ value is also used, when a topology change has
-+ been detected and is underway, to age all dynamic
-+ entries in the Forwarding Database. [Note that
-+ this value is the one that this bridge is
-+ currently using, in contrast to
-+ dot1dStpBridgeForwardDelay which is the value that
-+ this bridge and all others would start using
-+ if/when this bridge were to become the root.]"
-+ REFERENCE
-+ "IEEE 802.1D-1990: Section 4.5.3.6"
-+ ::= { dot1dStp 11 }
-+
-+dot1dStpBridgeMaxAge OBJECT-TYPE
-+ SYNTAX Timeout (600..4000)
-+
-+ ACCESS read-write
-+ STATUS mandatory
-+ DESCRIPTION
-+ "The value that all bridges use for MaxAge when
-+ this bridge is acting as the root. Note that
-+ 802.1D-1990 specifies that the range for this
-+ parameter is related to the value of
-+ dot1dStpBridgeHelloTime. The granularity of this
-+ timer is specified by 802.1D-1990 to be 1 second.
-+ An agent may return a badValue error if a set is
-+ attempted to a value which is not a whole number
-+ of seconds."
-+ REFERENCE
-+ "IEEE 802.1D-1990: Section 4.5.3.8"
-+ ::= { dot1dStp 12 }
-+
-+dot1dStpBridgeHelloTime OBJECT-TYPE
-+ SYNTAX Timeout (100..1000)
-+ ACCESS read-write
-+ STATUS mandatory
-+ DESCRIPTION
-+ "The value that all bridges use for HelloTime when
-+ this bridge is acting as the root. The
-+ granularity of this timer is specified by 802.1D-
-+ 1990 to be 1 second. An agent may return a
-+ badValue error if a set is attempted to a value
-+ which is not a whole number of seconds."
-+ REFERENCE
-+ "IEEE 802.1D-1990: Section 4.5.3.9"
-+ ::= { dot1dStp 13 }
-+
-+dot1dStpBridgeForwardDelay OBJECT-TYPE
-+ SYNTAX Timeout (400..3000)
-+ ACCESS read-write
-+ STATUS mandatory
-+ DESCRIPTION
-+ "The value that all bridges use for ForwardDelay
-+ when this bridge is acting as the root. Note that
-+ 802.1D-1990 specifies that the range for this
-+ parameter is related to the value of
-+ dot1dStpBridgeMaxAge. The granularity of this
-+ timer is specified by 802.1D-1990 to be 1 second.
-+ An agent may return a badValue error if a set is
-+ attempted to a value which is not a whole number
-+ of seconds."
-+ REFERENCE
-+ "IEEE 802.1D-1990: Section 4.5.3.10"
-+ ::= { dot1dStp 14 }
-+
-+-- The Spanning Tree Port Table
-+
-+dot1dStpPortTable OBJECT-TYPE
-+ SYNTAX SEQUENCE OF Dot1dStpPortEntry
-+ ACCESS not-accessible
-+ STATUS mandatory
-+ DESCRIPTION
-+ "A table that contains port-specific information
-+ for the Spanning Tree Protocol."
-+ ::= { dot1dStp 15 }
-+
-+dot1dStpPortEntry OBJECT-TYPE
-+ SYNTAX Dot1dStpPortEntry
-+ ACCESS not-accessible
-+ STATUS mandatory
-+ DESCRIPTION
-+ "A list of information maintained by every port
-+ about the Spanning Tree Protocol state for that
-+ port."
-+ INDEX { dot1dStpPort }
-+ ::= { dot1dStpPortTable 1 }
-+
-+Dot1dStpPortEntry ::=
-+ SEQUENCE {
-+ dot1dStpPort
-+ INTEGER,
-+ dot1dStpPortPriority
-+ INTEGER,
-+ dot1dStpPortState
-+ INTEGER,
-+ dot1dStpPortEnable
-+ INTEGER,
-+ dot1dStpPortPathCost
-+ INTEGER,
-+ dot1dStpPortDesignatedRoot
-+ BridgeId,
-+ dot1dStpPortDesignatedCost
-+ INTEGER,
-+ dot1dStpPortDesignatedBridge
-+ BridgeId,
-+ dot1dStpPortDesignatedPort
-+ OCTET STRING,
-+ dot1dStpPortForwardTransitions
-+ Counter
-+ }
-+
-+dot1dStpPort OBJECT-TYPE
-+ SYNTAX INTEGER (1..65535)
-+
-+ ACCESS read-only
-+ STATUS mandatory
-+ DESCRIPTION
-+ "The port number of the port for which this entry
-+ contains Spanning Tree Protocol management
-+ information."
-+ REFERENCE
-+ "IEEE 802.1D-1990: Section 6.8.2.1.2"
-+ ::= { dot1dStpPortEntry 1 }
-+
-+dot1dStpPortPriority OBJECT-TYPE
-+ SYNTAX INTEGER (0..255)
-+ ACCESS read-write
-+ STATUS mandatory
-+ DESCRIPTION
-+ "The value of the priority field which is
-+ contained in the first (in network byte order)
-+ octet of the (2 octet long) Port ID. The other
-+ octet of the Port ID is given by the value of
-+ dot1dStpPort."
-+ REFERENCE
-+ "IEEE 802.1D-1990: Section 4.5.5.1"
-+ ::= { dot1dStpPortEntry 2 }
-+
-+dot1dStpPortState OBJECT-TYPE
-+ SYNTAX INTEGER {
-+ disabled(1),
-+ blocking(2),
-+ listening(3),
-+ learning(4),
-+ forwarding(5),
-+ broken(6)
-+ }
-+ ACCESS read-only
-+ STATUS mandatory
-+ DESCRIPTION
-+ "The port's current state as defined by
-+ application of the Spanning Tree Protocol. This
-+ state controls what action a port takes on
-+ reception of a frame. If the bridge has detected
-+ a port that is malfunctioning it will place that
-+ port into the broken(6) state. For ports which
-+ are disabled (see dot1dStpPortEnable), this object
-+ will have a value of disabled(1)."
-+ REFERENCE
-+ "IEEE 802.1D-1990: Section 4.5.5.2"
-+ ::= { dot1dStpPortEntry 3 }
-+
-+dot1dStpPortEnable OBJECT-TYPE
-+ SYNTAX INTEGER {
-+ enabled(1),
-+ disabled(2)
-+ }
-+ ACCESS read-write
-+ STATUS mandatory
-+ DESCRIPTION
-+ "The enabled/disabled status of the port."
-+ REFERENCE
-+ "IEEE 802.1D-1990: Section 4.5.5.2"
-+ ::= { dot1dStpPortEntry 4 }
-+
-+dot1dStpPortPathCost OBJECT-TYPE
-+ SYNTAX INTEGER (1..65535)
-+ ACCESS read-write
-+ STATUS mandatory
-+ DESCRIPTION
-+ "The contribution of this port to the path cost of
-+ paths towards the spanning tree root which include
-+ this port. 802.1D-1990 recommends that the
-+ default value of this parameter be in inverse
-+ proportion to the speed of the attached LAN."
-+ REFERENCE
-+ "IEEE 802.1D-1990: Section 4.5.5.3"
-+ ::= { dot1dStpPortEntry 5 }
-+
-+dot1dStpPortDesignatedRoot OBJECT-TYPE
-+ SYNTAX BridgeId
-+ ACCESS read-only
-+ STATUS mandatory
-+ DESCRIPTION
-+ "The unique Bridge Identifier of the Bridge
-+ recorded as the Root in the Configuration BPDUs
-+ transmitted by the Designated Bridge for the
-+ segment to which the port is attached."
-+ REFERENCE
-+ "IEEE 802.1D-1990: Section 4.5.5.4"
-+ ::= { dot1dStpPortEntry 6 }
-+
-+dot1dStpPortDesignatedCost OBJECT-TYPE
-+ SYNTAX INTEGER
-+ ACCESS read-only
-+ STATUS mandatory
-+ DESCRIPTION
-+ "The path cost of the Designated Port of the
-+ segment connected to this port. This value is
-+ compared to the Root Path Cost field in received
-+
-+ bridge PDUs."
-+ REFERENCE
-+ "IEEE 802.1D-1990: Section 4.5.5.5"
-+ ::= { dot1dStpPortEntry 7 }
-+
-+dot1dStpPortDesignatedBridge OBJECT-TYPE
-+ SYNTAX BridgeId
-+ ACCESS read-only
-+ STATUS mandatory
-+ DESCRIPTION
-+ "The Bridge Identifier of the bridge which this
-+ port considers to be the Designated Bridge for
-+ this port's segment."
-+ REFERENCE
-+ "IEEE 802.1D-1990: Section 4.5.5.6"
-+ ::= { dot1dStpPortEntry 8 }
-+
-+dot1dStpPortDesignatedPort OBJECT-TYPE
-+ SYNTAX OCTET STRING (SIZE (2))
-+ ACCESS read-only
-+ STATUS mandatory
-+ DESCRIPTION
-+ "The Port Identifier of the port on the Designated
-+ Bridge for this port's segment."
-+ REFERENCE
-+ "IEEE 802.1D-1990: Section 4.5.5.7"
-+ ::= { dot1dStpPortEntry 9 }
-+
-+dot1dStpPortForwardTransitions OBJECT-TYPE
-+ SYNTAX Counter
-+ ACCESS read-only
-+ STATUS mandatory
-+ DESCRIPTION
-+ "The number of times this port has transitioned
-+ from the Learning state to the Forwarding state."
-+ ::= { dot1dStpPortEntry 10 }
-+
-+-- the dot1dTp group
-+
-+-- Implementation of the dot1dTp group is optional. It is
-+-- implemented by those bridges that support the transparent
-+-- bridging mode. A transparent or SRT bridge will implement
-+-- this group.
-+
-+dot1dTpLearnedEntryDiscards OBJECT-TYPE
-+ SYNTAX Counter
-+
-+ ACCESS read-only
-+ STATUS mandatory
-+ DESCRIPTION
-+ "The total number of Forwarding Database entries,
-+ which have been or would have been learnt, but
-+ have been discarded due to a lack of space to
-+ store them in the Forwarding Database. If this
-+ counter is increasing, it indicates that the
-+ Forwarding Database is regularly becoming full (a
-+ condition which has unpleasant performance effects
-+ on the subnetwork). If this counter has a
-+ significant value but is not presently increasing,
-+ it indicates that the problem has been occurring
-+ but is not persistent."
-+ REFERENCE
-+ "IEEE 802.1D-1990: Section 6.7.1.1.3"
-+ ::= { dot1dTp 1 }
-+
-+dot1dTpAgingTime OBJECT-TYPE
-+ SYNTAX INTEGER (10..1000000)
-+ ACCESS read-write
-+ STATUS mandatory
-+ DESCRIPTION
-+ "The timeout period in seconds for aging out
-+ dynamically learned forwarding information.
-+ 802.1D-1990 recommends a default of 300 seconds."
-+ REFERENCE
-+ "IEEE 802.1D-1990: Section 6.7.1.1.3"
-+ ::= { dot1dTp 2 }
-+
-+-- The Forwarding Database for Transparent Bridges
-+
-+dot1dTpFdbTable OBJECT-TYPE
-+ SYNTAX SEQUENCE OF Dot1dTpFdbEntry
-+ ACCESS not-accessible
-+ STATUS mandatory
-+ DESCRIPTION
-+ "A table that contains information about unicast
-+ entries for which the bridge has forwarding and/or
-+ filtering information. This information is used
-+ by the transparent bridging function in
-+ determining how to propagate a received frame."
-+ ::= { dot1dTp 3 }
-+
-+dot1dTpFdbEntry OBJECT-TYPE
-+ SYNTAX Dot1dTpFdbEntry
-+ ACCESS not-accessible
-+ STATUS mandatory
-+ DESCRIPTION
-+ "Information about a specific unicast MAC address
-+ for which the bridge has some forwarding and/or
-+ filtering information."
-+ INDEX { dot1dTpFdbAddress }
-+ ::= { dot1dTpFdbTable 1 }
-+
-+Dot1dTpFdbEntry ::=
-+ SEQUENCE {
-+ dot1dTpFdbAddress
-+ MacAddress,
-+ dot1dTpFdbPort
-+ INTEGER,
-+ dot1dTpFdbStatus
-+ INTEGER
-+ }
-+
-+dot1dTpFdbAddress OBJECT-TYPE
-+ SYNTAX MacAddress
-+ ACCESS read-only
-+ STATUS mandatory
-+ DESCRIPTION
-+ "A unicast MAC address for which the bridge has
-+ forwarding and/or filtering information."
-+ REFERENCE
-+ "IEEE 802.1D-1990: Section 3.9.1, 3.9.2"
-+ ::= { dot1dTpFdbEntry 1 }
-+
-+dot1dTpFdbPort OBJECT-TYPE
-+ SYNTAX INTEGER
-+ ACCESS read-only
-+ STATUS mandatory
-+ DESCRIPTION
-+ "Either the value '0', or the port number of the
-+ port on which a frame having a source address
-+ equal to the value of the corresponding instance
-+ of dot1dTpFdbAddress has been seen. A value of
-+ '0' indicates that the port number has not been
-+ learned but that the bridge does have some
-+ forwarding/filtering information about this
-+ address (e.g. in the dot1dStaticTable).
-+ Implementors are encouraged to assign the port
-+ value to this object whenever it is learned even
-+ for addresses for which the corresponding value of
-+ dot1dTpFdbStatus is not learned(3)."
-+ ::= { dot1dTpFdbEntry 2 }
-+
-+dot1dTpFdbStatus OBJECT-TYPE
-+ SYNTAX INTEGER {
-+ other(1),
-+ invalid(2),
-+ learned(3),
-+ self(4),
-+ mgmt(5)
-+ }
-+ ACCESS read-only
-+ STATUS mandatory
-+ DESCRIPTION
-+ "The status of this entry. The meanings of the
-+ values are:
-+ other(1) : none of the following. This would
-+ include the case where some other
-+ MIB object (not the corresponding
-+ instance of dot1dTpFdbPort, nor an
-+ entry in the dot1dStaticTable) is
-+ being used to determine if and how
-+ frames addressed to the value of
-+ the corresponding instance of
-+ dot1dTpFdbAddress are being
-+ forwarded.
-+ invalid(2) : this entry is not longer valid
-+ (e.g., it was learned but has since
-+ aged-out), but has not yet been
-+ flushed from the table.
-+ learned(3) : the value of the corresponding
-+ instance of dot1dTpFdbPort was
-+ learned, and is being used.
-+ self(4) : the value of the corresponding
-+ instance of dot1dTpFdbAddress
-+ represents one of the bridge's
-+ addresses. The corresponding
-+ instance of dot1dTpFdbPort
-+ indicates which of the bridge's
-+ ports has this address.
-+ mgmt(5) : the value of the corresponding
-+ instance of dot1dTpFdbAddress is
-+ also the value of an existing
-+ instance of dot1dStaticAddress."
-+ ::= { dot1dTpFdbEntry 3 }
-+
-+-- Port Table for Transparent Bridges
-+
-+dot1dTpPortTable OBJECT-TYPE
-+ SYNTAX SEQUENCE OF Dot1dTpPortEntry
-+ ACCESS not-accessible
-+ STATUS mandatory
-+ DESCRIPTION
-+ "A table that contains information about every
-+ port that is associated with this transparent
-+ bridge."
-+ ::= { dot1dTp 4 }
-+
-+dot1dTpPortEntry OBJECT-TYPE
-+ SYNTAX Dot1dTpPortEntry
-+ ACCESS not-accessible
-+ STATUS mandatory
-+ DESCRIPTION
-+ "A list of information for each port of a
-+ transparent bridge."
-+ INDEX { dot1dTpPort }
-+ ::= { dot1dTpPortTable 1 }
-+
-+Dot1dTpPortEntry ::=
-+ SEQUENCE {
-+ dot1dTpPort
-+ INTEGER,
-+ dot1dTpPortMaxInfo
-+ INTEGER,
-+ dot1dTpPortInFrames
-+ Counter,
-+ dot1dTpPortOutFrames
-+ Counter,
-+ dot1dTpPortInDiscards
-+ Counter
-+ }
-+
-+dot1dTpPort OBJECT-TYPE
-+ SYNTAX INTEGER (1..65535)
-+ ACCESS read-only
-+ STATUS mandatory
-+ DESCRIPTION
-+ "The port number of the port for which this entry
-+ contains Transparent bridging management
-+ information."
-+ ::= { dot1dTpPortEntry 1 }
-+
-+-- It would be nice if we could use ifMtu as the size of the
-+-- largest INFO field, but we can't because ifMtu is defined
-+-- to be the size that the (inter-)network layer can use which
-+-- can differ from the MAC layer (especially if several layers
-+-- of encapsulation are used).
-+
-+dot1dTpPortMaxInfo OBJECT-TYPE
-+ SYNTAX INTEGER
-+ ACCESS read-only
-+ STATUS mandatory
-+ DESCRIPTION
-+ "The maximum size of the INFO (non-MAC) field that
-+ this port will receive or transmit."
-+ ::= { dot1dTpPortEntry 2 }
-+
-+dot1dTpPortInFrames OBJECT-TYPE
-+ SYNTAX Counter
-+ ACCESS read-only
-+ STATUS mandatory
-+ DESCRIPTION
-+ "The number of frames that have been received by
-+ this port from its segment. Note that a frame
-+ received on the interface corresponding to this
-+ port is only counted by this object if and only if
-+ it is for a protocol being processed by the local
-+ bridging function, including bridge management
-+ frames."
-+ REFERENCE
-+ "IEEE 802.1D-1990: Section 6.6.1.1.3"
-+ ::= { dot1dTpPortEntry 3 }
-+
-+dot1dTpPortOutFrames OBJECT-TYPE
-+ SYNTAX Counter
-+ ACCESS read-only
-+ STATUS mandatory
-+ DESCRIPTION
-+ "The number of frames that have been transmitted
-+ by this port to its segment. Note that a frame
-+ transmitted on the interface corresponding to this
-+ port is only counted by this object if and only if
-+ it is for a protocol being processed by the local
-+ bridging function, including bridge management
-+ frames."
-+ REFERENCE
-+ "IEEE 802.1D-1990: Section 6.6.1.1.3"
-+ ::= { dot1dTpPortEntry 4 }
-+
-+dot1dTpPortInDiscards OBJECT-TYPE
-+ SYNTAX Counter
-+ ACCESS read-only
-+ STATUS mandatory
-+ DESCRIPTION
-+ "Count of valid frames received which were
-+ discarded (i.e., filtered) by the Forwarding
-+ Process."
-+ REFERENCE
-+ "IEEE 802.1D-1990: Section 6.6.1.1.3"
-+ ::= { dot1dTpPortEntry 5 }
-+-- The Static (Destination-Address Filtering) Database
-+
-+-- Implementation of this group is optional.
-+
-+dot1dStaticTable OBJECT-TYPE
-+ SYNTAX SEQUENCE OF Dot1dStaticEntry
-+ ACCESS not-accessible
-+ STATUS mandatory
-+ DESCRIPTION
-+ "A table containing filtering information
-+ configured into the bridge by (local or network)
-+ management specifying the set of ports to which
-+ frames received from specific ports and containing
-+ specific destination addresses are allowed to be
-+ forwarded. The value of zero in this table as the
-+ port number from which frames with a specific
-+ destination address are received, is used to
-+ specify all ports for which there is no specific
-+ entry in this table for that particular
-+ destination address. Entries are valid for
-+ unicast and for group/broadcast addresses."
-+ REFERENCE
-+ "IEEE 802.1D-1990: Section 6.7.2"
-+ ::= { dot1dStatic 1 }
-+
-+dot1dStaticEntry OBJECT-TYPE
-+ SYNTAX Dot1dStaticEntry
-+ ACCESS not-accessible
-+ STATUS mandatory
-+ DESCRIPTION
-+ "Filtering information configured into the bridge
-+ by (local or network) management specifying the
-+ set of ports to which frames received from a
-+ specific port and containing a specific
-+ destination address are allowed to be forwarded."
-+ REFERENCE
-+ "IEEE 802.1D-1990: Section 6.7.2"
-+ INDEX { dot1dStaticAddress, dot1dStaticReceivePort }
-+ ::= { dot1dStaticTable 1 }
-+
-+Dot1dStaticEntry ::=
-+ SEQUENCE {
-+ dot1dStaticAddress
-+ MacAddress,
-+ dot1dStaticReceivePort
-+ INTEGER,
-+ dot1dStaticAllowedToGoTo
-+ OCTET STRING,
-+ dot1dStaticStatus
-+ INTEGER
-+ }
-+
-+dot1dStaticAddress OBJECT-TYPE
-+ SYNTAX MacAddress
-+ ACCESS read-write
-+ STATUS mandatory
-+ DESCRIPTION
-+ "The destination MAC address in a frame to which
-+ this entry's filtering information applies. This
-+ object can take the value of a unicast address, a
-+ group address or the broadcast address."
-+ REFERENCE
-+ "IEEE 802.1D-1990: Section 3.9.1, 3.9.2"
-+ ::= { dot1dStaticEntry 1 }
-+
-+dot1dStaticReceivePort OBJECT-TYPE
-+ SYNTAX INTEGER
-+ ACCESS read-write
-+ STATUS mandatory
-+ DESCRIPTION
-+ "Either the value '0', or the port number of the
-+ port from which a frame must be received in order
-+ for this entry's filtering information to apply.
-+ A value of zero indicates that this entry applies
-+ on all ports of the bridge for which there is no
-+ other applicable entry."
-+ ::= { dot1dStaticEntry 2 }
-+
-+dot1dStaticAllowedToGoTo OBJECT-TYPE
-+ SYNTAX OCTET STRING
-+ ACCESS read-write
-+ STATUS mandatory
-+ DESCRIPTION
-+ "The set of ports to which frames received from a
-+ specific port and destined for a specific MAC
-+
-+ address, are allowed to be forwarded. Each octet
-+ within the value of this object specifies a set of
-+ eight ports, with the first octet specifying ports
-+ 1 through 8, the second octet specifying ports 9
-+ through 16, etc. Within each octet, the most
-+ significant bit represents the lowest numbered
-+ port, and the least significant bit represents the
-+ highest numbered port. Thus, each port of the
-+ bridge is represented by a single bit within the
-+ value of this object. If that bit has a value of
-+ '1' then that port is included in the set of
-+ ports; the port is not included if its bit has a
-+ value of '0'. (Note that the setting of the bit
-+ corresponding to the port from which a frame is
-+ received is irrelevant.) The default value of
-+ this object is a string of ones of appropriate
-+ length."
-+ ::= { dot1dStaticEntry 3 }
-+
-+dot1dStaticStatus OBJECT-TYPE
-+ SYNTAX INTEGER {
-+ other(1),
-+ invalid(2),
-+ permanent(3),
-+ deleteOnReset(4),
-+ deleteOnTimeout(5)
-+ }
-+ ACCESS read-write
-+ STATUS mandatory
-+ DESCRIPTION
-+ "This object indicates the status of this entry.
-+ The default value is permanent(3).
-+ other(1) - this entry is currently in use but
-+ the conditions under which it will
-+ remain so are different from each of the
-+ following values.
-+ invalid(2) - writing this value to the object
-+ removes the corresponding entry.
-+ permanent(3) - this entry is currently in use
-+ and will remain so after the next reset
-+ of the bridge.
-+ deleteOnReset(4) - this entry is currently in
-+ use and will remain so until the next
-+ reset of the bridge.
-+ deleteOnTimeout(5) - this entry is currently
-+ in use and will remain so until it is
-+ aged out."
-+
-+ ::= { dot1dStaticEntry 4 }
-+
-+-- Traps for use by Bridges
-+
-+-- Traps for the Spanning Tree Protocol
-+
-+newRoot TRAP-TYPE
-+ ENTERPRISE dot1dBridge
-+ DESCRIPTION
-+ "The newRoot trap indicates that the sending agent
-+ has become the new root of the Spanning Tree; the
-+ trap is sent by a bridge soon after its election
-+ as the new root, e.g., upon expiration of the
-+ Topology Change Timer immediately subsequent to
-+ its election. Implementation of this trap is
-+ optional."
-+ ::= 1
-+
-+topologyChange TRAP-TYPE
-+ ENTERPRISE dot1dBridge
-+ DESCRIPTION
-+ "A topologyChange trap is sent by a bridge when
-+ any of its configured ports transitions from the
-+ Learning state to the Forwarding state, or from
-+ the Forwarding state to the Blocking state. The
-+ trap is not sent if a newRoot trap is sent for the
-+ same transition. Implementation of this trap is
-+ optional."
-+ ::= 2
-+
-+END
diff -ruN net-snmp-5.4.1.orig/mibs/GNOME-SMI.txt net-snmp-5.4.1/mibs/GNOME-SMI.txt
--- net-snmp-5.4.1.orig/mibs/GNOME-SMI.txt 1970-01-01 01:00:00.000000000 +0100
+++ net-snmp-5.4.1/mibs/GNOME-SMI.txt 2007-09-20 16:33:55.000000000 +0200
@@ -2102,4167 +90,3 @@
+-- more to come if necessary.
+
+END
-diff -ruN net-snmp-5.4.1.orig/mibs/OSPF-MIB.txt net-snmp-5.4.1/mibs/OSPF-MIB.txt
---- net-snmp-5.4.1.orig/mibs/OSPF-MIB.txt 1970-01-01 01:00:00.000000000 +0100
-+++ net-snmp-5.4.1/mibs/OSPF-MIB.txt 2007-09-20 16:30:52.000000000 +0200
-@@ -0,0 +1,2723 @@
-+OSPF-MIB DEFINITIONS ::= BEGIN
-+
-+ IMPORTS
-+ MODULE-IDENTITY, OBJECT-TYPE, Counter32, Gauge32,
-+ Integer32, IpAddress
-+ FROM SNMPv2-SMI
-+ TEXTUAL-CONVENTION, TruthValue, RowStatus
-+ FROM SNMPv2-TC
-+ MODULE-COMPLIANCE, OBJECT-GROUP FROM SNMPv2-CONF
-+ mib-2 FROM RFC1213-MIB;
-+
-+-- This MIB module uses the extended OBJECT-TYPE macro as
-+-- defined in [9].
-+
-+ospf MODULE-IDENTITY
-+ LAST-UPDATED "9501201225Z" -- Fri Jan 20 12:25:50 PST 1995
-+ ORGANIZATION "IETF OSPF Working Group"
-+ CONTACT-INFO
-+ " Fred Baker
-+ Postal: Cisco Systems
-+ 519 Lado Drive
-+ Santa Barbara, California 93111
-+ Tel: +1 805 681 0115
-+ E-Mail: fred at cisco.com
-+
-+ Rob Coltun
-+ Postal: RainbowBridge Communications
-+ Tel: (301) 340-9416
-+ E-Mail: rcoltun at rainbow-bridge.com"
-+ DESCRIPTION
-+ "The MIB module to describe the OSPF Version 2
-+ Protocol"
-+ ::= { mib-2 14 }
-+
-+-- The Area ID, in OSPF, has the same format as an IP Address,
-+-- but has the function of defining a summarization point for
-+-- Link State Advertisements
-+
-+AreaID ::= TEXTUAL-CONVENTION
-+ STATUS current
-+ DESCRIPTION
-+ "An OSPF Area Identifier."
-+ SYNTAX IpAddress
-+
-+
-+-- The Router ID, in OSPF, has the same format as an IP Address,
-+-- but identifies the router independent of its IP Address.
-+
-+RouterID ::= TEXTUAL-CONVENTION
-+ STATUS current
-+ DESCRIPTION
-+ "A OSPF Router Identifier."
-+ SYNTAX IpAddress
-+
-+
-+-- The OSPF Metric is defined as an unsigned value in the range
-+
-+Metric ::= TEXTUAL-CONVENTION
-+ STATUS current
-+ DESCRIPTION
-+ "The OSPF Internal Metric."
-+ SYNTAX Integer32 (0..'FFFF'h)
-+
-+BigMetric ::= TEXTUAL-CONVENTION
-+ STATUS current
-+ DESCRIPTION
-+ "The OSPF External Metric."
-+ SYNTAX Integer32 (0..'FFFFFF'h)
-+
-+-- Status Values
-+
-+Status ::= TEXTUAL-CONVENTION
-+ STATUS current
-+ DESCRIPTION
-+ "The status of an interface: 'enabled' indicates that
-+ it is willing to communicate with other OSPF Routers,
-+ while 'disabled' indicates that it is not."
-+ SYNTAX INTEGER { enabled (1), disabled (2) }
-+
-+-- Time Durations measured in seconds
-+
-+PositiveInteger ::= TEXTUAL-CONVENTION
-+ STATUS current
-+ DESCRIPTION
-+ "A positive integer. Values in excess are precluded as
-+ unnecessary and prone to interoperability issues."
-+ SYNTAX Integer32 (0..'7FFFFFFF'h)
-+
-+HelloRange ::= TEXTUAL-CONVENTION
-+ STATUS current
-+ DESCRIPTION
-+ "The range of intervals on which hello messages are
-+ exchanged."
-+ SYNTAX Integer32 (1..'FFFF'h)
-+
-+UpToMaxAge ::= TEXTUAL-CONVENTION
-+ STATUS current
-+ DESCRIPTION
-+ "The values that one might find or configure for
-+ variables bounded by the maximum age of an LSA."
-+ SYNTAX Integer32 (0..3600)
-+
-+
-+-- The range of ifIndex
-+
-+InterfaceIndex ::= TEXTUAL-CONVENTION
-+ STATUS current
-+ DESCRIPTION
-+ "The range of ifIndex."
-+ SYNTAX Integer32
-+
-+
-+-- Potential Priorities for the Designated Router Election
-+
-+DesignatedRouterPriority ::= TEXTUAL-CONVENTION
-+ STATUS current
-+ DESCRIPTION
-+ "The values defined for the priority of a system for
-+ becoming the designated router."
-+ SYNTAX Integer32 (0..'FF'h)
-+
-+TOSType ::= TEXTUAL-CONVENTION
-+ STATUS current
-+ DESCRIPTION
-+ "Type of Service is defined as a mapping to the IP Type of
-+ Service Flags as defined in the IP Forwarding Table MIB
-+
-+ +-----+-----+-----+-----+-----+-----+-----+-----+
-+ | | | |
-+ | PRECEDENCE | TYPE OF SERVICE | 0 |
-+ | | | |
-+ +-----+-----+-----+-----+-----+-----+-----+-----+
-+
-+ IP TOS IP TOS
-+ Field Policy Field Policy
-+
-+ Contents Code Contents Code
-+ 0 0 0 0 ==> 0 0 0 0 1 ==> 2
-+ 0 0 1 0 ==> 4 0 0 1 1 ==> 6
-+ 0 1 0 0 ==> 8 0 1 0 1 ==> 10
-+ 0 1 1 0 ==> 12 0 1 1 1 ==> 14
-+ 1 0 0 0 ==> 16 1 0 0 1 ==> 18
-+ 1 0 1 0 ==> 20 1 0 1 1 ==> 22
-+ 1 1 0 0 ==> 24 1 1 0 1 ==> 26
-+ 1 1 1 0 ==> 28 1 1 1 1 ==> 30
-+
-+ The remaining values are left for future definition."
-+ SYNTAX Integer32 (0..30)
-+
-+
-+-- OSPF General Variables
-+
-+-- These parameters apply globally to the Router's
-+-- OSPF Process.
-+
-+ospfGeneralGroup OBJECT IDENTIFIER ::= { ospf 1 }
-+
-+
-+ ospfRouterId OBJECT-TYPE
-+ SYNTAX RouterID
-+ MAX-ACCESS read-write
-+ STATUS current
-+ DESCRIPTION
-+ "A 32-bit integer uniquely identifying the
-+ router in the Autonomous System.
-+
-+ By convention, to ensure uniqueness, this
-+ should default to the value of one of the
-+ router's IP interface addresses."
-+ REFERENCE
-+ "OSPF Version 2, C.1 Global parameters"
-+ ::= { ospfGeneralGroup 1 }
-+
-+
-+ ospfAdminStat OBJECT-TYPE
-+ SYNTAX Status
-+ MAX-ACCESS read-write
-+ STATUS current
-+ DESCRIPTION
-+ "The administrative status of OSPF in the
-+ router. The value 'enabled' denotes that the
-+ OSPF Process is active on at least one inter-
-+ face; 'disabled' disables it on all inter-
-+ faces."
-+ ::= { ospfGeneralGroup 2 }
-+
-+ ospfVersionNumber OBJECT-TYPE
-+ SYNTAX INTEGER { version2 (2) }
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "The current version number of the OSPF proto-
-+ col is 2."
-+ REFERENCE
-+ "OSPF Version 2, Title"
-+ ::= { ospfGeneralGroup 3 }
-+
-+
-+ ospfAreaBdrRtrStatus OBJECT-TYPE
-+ SYNTAX TruthValue
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "A flag to note whether this router is an area
-+ border router."
-+ REFERENCE
-+ "OSPF Version 2, Section 3 Splitting the AS into
-+ Areas"
-+ ::= { ospfGeneralGroup 4 }
-+
-+
-+ ospfASBdrRtrStatus OBJECT-TYPE
-+ SYNTAX TruthValue
-+ MAX-ACCESS read-write
-+ STATUS current
-+ DESCRIPTION
-+ "A flag to note whether this router is config-
-+ ured as an Autonomous System border router."
-+ REFERENCE
-+ "OSPF Version 2, Section 3.3 Classification of
-+ routers"
-+ ::= { ospfGeneralGroup 5 }
-+
-+ ospfExternLsaCount OBJECT-TYPE
-+ SYNTAX Gauge32
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "The number of external (LS type 5) link-state
-+ advertisements in the link-state database."
-+ REFERENCE
-+ "OSPF Version 2, Appendix A.4.5 AS external link
-+ advertisements"
-+ ::= { ospfGeneralGroup 6 }
-+
-+
-+ ospfExternLsaCksumSum OBJECT-TYPE
-+ SYNTAX Integer32
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "The 32-bit unsigned sum of the LS checksums of
-+ the external link-state advertisements con-
-+ tained in the link-state database. This sum
-+ can be used to determine if there has been a
-+ change in a router's link state database, and
-+ to compare the link-state database of two
-+ routers."
-+ ::= { ospfGeneralGroup 7 }
-+
-+
-+ ospfTOSSupport OBJECT-TYPE
-+ SYNTAX TruthValue
-+ MAX-ACCESS read-write
-+ STATUS current
-+ DESCRIPTION
-+ "The router's support for type-of-service rout-
-+ ing."
-+ REFERENCE
-+ "OSPF Version 2, Appendix F.1.2 Optional TOS
-+ support"
-+ ::= { ospfGeneralGroup 8 }
-+
-+ ospfOriginateNewLsas OBJECT-TYPE
-+ SYNTAX Counter32
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "The number of new link-state advertisements
-+ that have been originated. This number is in-
-+ cremented each time the router originates a new
-+ LSA."
-+ ::= { ospfGeneralGroup 9 }
-+
-+
-+ ospfRxNewLsas OBJECT-TYPE
-+ SYNTAX Counter32
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "The number of link-state advertisements re-
-+ ceived determined to be new instantiations.
-+ This number does not include newer instantia-
-+ tions of self-originated link-state advertise-
-+ ments."
-+ ::= { ospfGeneralGroup 10 }
-+
-+ ospfExtLsdbLimit OBJECT-TYPE
-+ SYNTAX Integer32 (-1..'7FFFFFFF'h)
-+ MAX-ACCESS read-write
-+ STATUS current
-+ DESCRIPTION
-+ "The maximum number of non-default AS-
-+ external-LSAs entries that can be stored in the
-+ link-state database. If the value is -1, then
-+ there is no limit.
-+
-+ When the number of non-default AS-external-LSAs
-+ in a router's link-state database reaches
-+ ospfExtLsdbLimit, the router enters Overflow-
-+ State. The router never holds more than
-+ ospfExtLsdbLimit non-default AS-external-LSAs
-+ in its database. OspfExtLsdbLimit MUST be set
-+ identically in all routers attached to the OSPF
-+ backbone and/or any regular OSPF area. (i.e.,
-+ OSPF stub areas and NSSAs are excluded)."
-+ DEFVAL { -1 }
-+ ::= { ospfGeneralGroup 11 }
-+
-+ ospfMulticastExtensions OBJECT-TYPE
-+ SYNTAX Integer32
-+ MAX-ACCESS read-write
-+ STATUS current
-+ DESCRIPTION
-+ "A Bit Mask indicating whether the router is
-+ forwarding IP multicast (Class D) datagrams
-+ based on the algorithms defined in the Multi-
-+ cast Extensions to OSPF.
-+
-+ Bit 0, if set, indicates that the router can
-+ forward IP multicast datagrams in the router's
-+ directly attached areas (called intra-area mul-
-+ ticast routing).
-+
-+ Bit 1, if set, indicates that the router can
-+ forward IP multicast datagrams between OSPF
-+ areas (called inter-area multicast routing).
-+
-+ Bit 2, if set, indicates that the router can
-+ forward IP multicast datagrams between Auto-
-+ nomous Systems (called inter-AS multicast rout-
-+ ing).
-+
-+ Only certain combinations of bit settings are
-+ allowed, namely: 0 (no multicast forwarding is
-+ enabled), 1 (intra-area multicasting only), 3
-+ (intra-area and inter-area multicasting), 5
-+ (intra-area and inter-AS multicasting) and 7
-+ (multicasting everywhere). By default, no mul-
-+ ticast forwarding is enabled."
-+ DEFVAL { 0 }
-+ ::= { ospfGeneralGroup 12 }
-+
-+ ospfExitOverflowInterval OBJECT-TYPE
-+ SYNTAX PositiveInteger
-+ MAX-ACCESS read-write
-+ STATUS current
-+ DESCRIPTION
-+ "The number of seconds that, after entering
-+ OverflowState, a router will attempt to leave
-+ OverflowState. This allows the router to again
-+ originate non-default AS-external-LSAs. When
-+ set to 0, the router will not leave Overflow-
-+ State until restarted."
-+ DEFVAL { 0 }
-+ ::= { ospfGeneralGroup 13 }
-+
-+
-+ ospfDemandExtensions OBJECT-TYPE
-+ SYNTAX TruthValue
-+ MAX-ACCESS read-write
-+ STATUS current
-+ DESCRIPTION
-+ "The router's support for demand routing."
-+ REFERENCE
-+ "OSPF Version 2, Appendix on Demand Routing"
-+ ::= { ospfGeneralGroup 14 }
-+
-+
-+-- The OSPF Area Data Structure contains information
-+-- regarding the various areas. The interfaces and
-+-- virtual links are configured as part of these areas.
-+-- Area 0.0.0.0, by definition, is the Backbone Area
-+
-+
-+ ospfAreaTable OBJECT-TYPE
-+ SYNTAX SEQUENCE OF OspfAreaEntry
-+ MAX-ACCESS not-accessible
-+ STATUS current
-+ DESCRIPTION
-+ "Information describing the configured parame-
-+ ters and cumulative statistics of the router's
-+ attached areas."
-+ REFERENCE
-+ "OSPF Version 2, Section 6 The Area Data Struc-
-+ ture"
-+ ::= { ospf 2 }
-+
-+
-+ ospfAreaEntry OBJECT-TYPE
-+ SYNTAX OspfAreaEntry
-+ MAX-ACCESS not-accessible
-+ STATUS current
-+ DESCRIPTION
-+ "Information describing the configured parame-
-+ ters and cumulative statistics of one of the
-+ router's attached areas."
-+ INDEX { ospfAreaId }
-+ ::= { ospfAreaTable 1 }
-+
-+OspfAreaEntry ::=
-+ SEQUENCE {
-+ ospfAreaId
-+ AreaID,
-+ ospfAuthType
-+ Integer32,
-+ ospfImportAsExtern
-+ INTEGER,
-+ ospfSpfRuns
-+ Counter32,
-+ ospfAreaBdrRtrCount
-+ Gauge32,
-+ ospfAsBdrRtrCount
-+ Gauge32,
-+ ospfAreaLsaCount
-+ Gauge32,
-+ ospfAreaLsaCksumSum
-+ Integer32,
-+ ospfAreaSummary
-+ INTEGER,
-+ ospfAreaStatus
-+ RowStatus
-+ }
-+
-+ ospfAreaId OBJECT-TYPE
-+ SYNTAX AreaID
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "A 32-bit integer uniquely identifying an area.
-+ Area ID 0.0.0.0 is used for the OSPF backbone."
-+ REFERENCE
-+ "OSPF Version 2, Appendix C.2 Area parameters"
-+ ::= { ospfAreaEntry 1 }
-+
-+
-+ ospfAuthType OBJECT-TYPE
-+ SYNTAX Integer32
-+ -- none (0),
-+ -- simplePassword (1)
-+ -- md5 (2)
-+ -- reserved for specification by IANA (> 2)
-+ MAX-ACCESS read-create
-+ STATUS obsolete
-+ DESCRIPTION
-+ "The authentication type specified for an area.
-+ Additional authentication types may be assigned
-+ locally on a per Area basis."
-+ REFERENCE
-+ "OSPF Version 2, Appendix E Authentication"
-+ DEFVAL { 0 } -- no authentication, by default
-+ ::= { ospfAreaEntry 2 }
-+
-+ ospfImportAsExtern OBJECT-TYPE
-+ SYNTAX INTEGER {
-+ importExternal (1),
-+ importNoExternal (2),
-+ importNssa (3)
-+ }
-+ MAX-ACCESS read-create
-+ STATUS current
-+ DESCRIPTION
-+ "The area's support for importing AS external
-+ link- state advertisements."
-+ REFERENCE
-+ "OSPF Version 2, Appendix C.2 Area parameters"
-+ DEFVAL { importExternal }
-+ ::= { ospfAreaEntry 3 }
-+
-+
-+ ospfSpfRuns OBJECT-TYPE
-+ SYNTAX Counter32
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "The number of times that the intra-area route
-+ table has been calculated using this area's
-+ link-state database. This is typically done
-+ using Dijkstra's algorithm."
-+ ::= { ospfAreaEntry 4 }
-+
-+
-+ ospfAreaBdrRtrCount OBJECT-TYPE
-+ SYNTAX Gauge32
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "The total number of area border routers reach-
-+ able within this area. This is initially zero,
-+ and is calculated in each SPF Pass."
-+ ::= { ospfAreaEntry 5 }
-+
-+ ospfAsBdrRtrCount OBJECT-TYPE
-+ SYNTAX Gauge32
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "The total number of Autonomous System border
-+ routers reachable within this area. This is
-+ initially zero, and is calculated in each SPF
-+ Pass."
-+ ::= { ospfAreaEntry 6 }
-+
-+
-+ ospfAreaLsaCount OBJECT-TYPE
-+ SYNTAX Gauge32
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "The total number of link-state advertisements
-+ in this area's link-state database, excluding
-+ AS External LSA's."
-+ ::= { ospfAreaEntry 7 }
-+
-+
-+ ospfAreaLsaCksumSum OBJECT-TYPE
-+ SYNTAX Integer32
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "The 32-bit unsigned sum of the link-state ad-
-+ vertisements' LS checksums contained in this
-+ area's link-state database. This sum excludes
-+ external (LS type 5) link-state advertisements.
-+ The sum can be used to determine if there has
-+ been a change in a router's link state data-
-+ base, and to compare the link-state database of
-+ two routers."
-+ DEFVAL { 0 }
-+ ::= { ospfAreaEntry 8 }
-+
-+ ospfAreaSummary OBJECT-TYPE
-+ SYNTAX INTEGER {
-+ noAreaSummary (1),
-+ sendAreaSummary (2)
-+ }
-+ MAX-ACCESS read-create
-+ STATUS current
-+ DESCRIPTION
-+ "The variable ospfAreaSummary controls the im-
-+ port of summary LSAs into stub areas. It has
-+ no effect on other areas.
-+
-+ If it is noAreaSummary, the router will neither
-+ originate nor propagate summary LSAs into the
-+ stub area. It will rely entirely on its de-
-+ fault route.
-+
-+ If it is sendAreaSummary, the router will both
-+ summarize and propagate summary LSAs."
-+ DEFVAL { noAreaSummary }
-+ ::= { ospfAreaEntry 9 }
-+
-+
-+ ospfAreaStatus OBJECT-TYPE
-+ SYNTAX RowStatus
-+ MAX-ACCESS read-create
-+ STATUS current
-+ DESCRIPTION
-+ "This variable displays the status of the en-
-+ try. Setting it to 'invalid' has the effect of
-+ rendering it inoperative. The internal effect
-+ (row removal) is implementation dependent."
-+ ::= { ospfAreaEntry 10 }
-+
-+
-+-- OSPF Area Default Metric Table
-+
-+-- The OSPF Area Default Metric Table describes the metrics
-+-- that a default Area Border Router will advertise into a
-+-- Stub area.
-+
-+
-+ ospfStubAreaTable OBJECT-TYPE
-+ SYNTAX SEQUENCE OF OspfStubAreaEntry
-+ MAX-ACCESS not-accessible
-+ STATUS current
-+ DESCRIPTION
-+ "The set of metrics that will be advertised by
-+ a default Area Border Router into a stub area."
-+ REFERENCE
-+ "OSPF Version 2, Appendix C.2, Area Parameters"
-+ ::= { ospf 3 }
-+
-+
-+ ospfStubAreaEntry OBJECT-TYPE
-+ SYNTAX OspfStubAreaEntry
-+ MAX-ACCESS not-accessible
-+ STATUS current
-+ DESCRIPTION
-+ "The metric for a given Type of Service that
-+ will be advertised by a default Area Border
-+ Router into a stub area."
-+ REFERENCE
-+ "OSPF Version 2, Appendix C.2, Area Parameters"
-+ INDEX { ospfStubAreaId, ospfStubTOS }
-+ ::= { ospfStubAreaTable 1 }
-+
-+OspfStubAreaEntry ::=
-+ SEQUENCE {
-+ ospfStubAreaId
-+ AreaID,
-+ ospfStubTOS
-+ TOSType,
-+ ospfStubMetric
-+ BigMetric,
-+ ospfStubStatus
-+ RowStatus,
-+ ospfStubMetricType
-+ INTEGER
-+ }
-+
-+ ospfStubAreaId OBJECT-TYPE
-+ SYNTAX AreaID
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "The 32 bit identifier for the Stub Area. On
-+ creation, this can be derived from the in-
-+ stance."
-+ ::= { ospfStubAreaEntry 1 }
-+
-+
-+ ospfStubTOS OBJECT-TYPE
-+ SYNTAX TOSType
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "The Type of Service associated with the
-+ metric. On creation, this can be derived from
-+ the instance."
-+ ::= { ospfStubAreaEntry 2 }
-+
-+
-+ ospfStubMetric OBJECT-TYPE
-+ SYNTAX BigMetric
-+ MAX-ACCESS read-create
-+ STATUS current
-+ DESCRIPTION
-+ "The metric value applied at the indicated type
-+ of service. By default, this equals the least
-+ metric at the type of service among the inter-
-+ faces to other areas."
-+ ::= { ospfStubAreaEntry 3 }
-+
-+
-+ ospfStubStatus OBJECT-TYPE
-+ SYNTAX RowStatus
-+ MAX-ACCESS read-create
-+ STATUS current
-+ DESCRIPTION
-+ "This variable displays the status of the en-
-+ try. Setting it to 'invalid' has the effect of
-+ rendering it inoperative. The internal effect
-+ (row removal) is implementation dependent."
-+ ::= { ospfStubAreaEntry 4 }
-+
-+ ospfStubMetricType OBJECT-TYPE
-+ SYNTAX INTEGER {
-+ ospfMetric (1), -- OSPF Metric
-+ comparableCost (2), -- external type 1
-+ nonComparable (3) -- external type 2
-+ }
-+ MAX-ACCESS read-create
-+ STATUS current
-+ DESCRIPTION
-+ "This variable displays the type of metric ad-
-+ vertised as a default route."
-+ DEFVAL { ospfMetric }
-+ ::= { ospfStubAreaEntry 5 }
-+
-+-- OSPF Link State Database
-+
-+-- The Link State Database contains the Link State
-+-- Advertisements from throughout the areas that the
-+-- device is attached to.
-+
-+
-+ ospfLsdbTable OBJECT-TYPE
-+ SYNTAX SEQUENCE OF OspfLsdbEntry
-+ MAX-ACCESS not-accessible
-+ STATUS current
-+ DESCRIPTION
-+ "The OSPF Process's Link State Database."
-+ REFERENCE
-+ "OSPF Version 2, Section 12 Link State Adver-
-+ tisements"
-+ ::= { ospf 4 }
-+
-+
-+ ospfLsdbEntry OBJECT-TYPE
-+ SYNTAX OspfLsdbEntry
-+ MAX-ACCESS not-accessible
-+ STATUS current
-+ DESCRIPTION
-+ "A single Link State Advertisement."
-+ INDEX { ospfLsdbAreaId, ospfLsdbType,
-+ ospfLsdbLsid, ospfLsdbRouterId }
-+ ::= { ospfLsdbTable 1 }
-+
-+OspfLsdbEntry ::=
-+ SEQUENCE {
-+ ospfLsdbAreaId
-+ AreaID,
-+ ospfLsdbType
-+ INTEGER,
-+ ospfLsdbLsid
-+ IpAddress,
-+ ospfLsdbRouterId
-+ RouterID,
-+ ospfLsdbSequence
-+ Integer32,
-+ ospfLsdbAge
-+ Integer32,
-+ ospfLsdbChecksum
-+ Integer32,
-+ ospfLsdbAdvertisement
-+ OCTET STRING
-+ }
-+ ospfLsdbAreaId OBJECT-TYPE
-+ SYNTAX AreaID
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "The 32 bit identifier of the Area from which
-+ the LSA was received."
-+ REFERENCE
-+ "OSPF Version 2, Appendix C.2 Area parameters"
-+ ::= { ospfLsdbEntry 1 }
-+
-+-- External Link State Advertisements are permitted
-+-- for backward compatibility, but should be displayed in
-+-- the ospfExtLsdbTable rather than here.
-+
-+ ospfLsdbType OBJECT-TYPE
-+ SYNTAX INTEGER {
-+ routerLink (1),
-+ networkLink (2),
-+ summaryLink (3),
-+ asSummaryLink (4),
-+ asExternalLink (5), -- but see ospfExtLsdbTable
-+ multicastLink (6),
-+ nssaExternalLink (7)
-+ }
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "The type of the link state advertisement.
-+ Each link state type has a separate advertise-
-+ ment format."
-+ REFERENCE
-+ "OSPF Version 2, Appendix A.4.1 The Link State
-+ Advertisement header"
-+ ::= { ospfLsdbEntry 2 }
-+
-+ ospfLsdbLsid OBJECT-TYPE
-+ SYNTAX IpAddress
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "The Link State ID is an LS Type Specific field
-+ containing either a Router ID or an IP Address;
-+ it identifies the piece of the routing domain
-+ that is being described by the advertisement."
-+ REFERENCE
-+ "OSPF Version 2, Section 12.1.4 Link State ID"
-+ ::= { ospfLsdbEntry 3 }
-+ ospfLsdbRouterId OBJECT-TYPE
-+ SYNTAX RouterID
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "The 32 bit number that uniquely identifies the
-+ originating router in the Autonomous System."
-+ REFERENCE
-+ "OSPF Version 2, Appendix C.1 Global parameters"
-+ ::= { ospfLsdbEntry 4 }
-+
-+-- Note that the OSPF Sequence Number is a 32 bit signed
-+-- integer. It starts with the value '80000001'h,
-+-- or -'7FFFFFFF'h, and increments until '7FFFFFFF'h
-+-- Thus, a typical sequence number will be very negative.
-+
-+ ospfLsdbSequence OBJECT-TYPE
-+ SYNTAX Integer32
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "The sequence number field is a signed 32-bit
-+ integer. It is used to detect old and dupli-
-+ cate link state advertisements. The space of
-+ sequence numbers is linearly ordered. The
-+ larger the sequence number the more recent the
-+ advertisement."
-+ REFERENCE
-+ "OSPF Version 2, Section 12.1.6 LS sequence
-+ number"
-+ ::= { ospfLsdbEntry 5 }
-+
-+
-+ ospfLsdbAge OBJECT-TYPE
-+ SYNTAX Integer32 -- Should be 0..MaxAge
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "This field is the age of the link state adver-
-+ tisement in seconds."
-+ REFERENCE
-+ "OSPF Version 2, Section 12.1.1 LS age"
-+ ::= { ospfLsdbEntry 6 }
-+
-+ ospfLsdbChecksum OBJECT-TYPE
-+ SYNTAX Integer32
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "This field is the checksum of the complete
-+ contents of the advertisement, excepting the
-+ age field. The age field is excepted so that
-+ an advertisement's age can be incremented
-+ without updating the checksum. The checksum
-+ used is the same that is used for ISO connec-
-+ tionless datagrams; it is commonly referred to
-+ as the Fletcher checksum."
-+ REFERENCE
-+ "OSPF Version 2, Section 12.1.7 LS checksum"
-+ ::= { ospfLsdbEntry 7 }
-+
-+
-+ ospfLsdbAdvertisement OBJECT-TYPE
-+ SYNTAX OCTET STRING (SIZE (1..65535))
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "The entire Link State Advertisement, including
-+ its header."
-+ REFERENCE
-+ "OSPF Version 2, Section 12 Link State Adver-
-+ tisements"
-+ ::= { ospfLsdbEntry 8 }
-+
-+
-+-- Address Range Table
-+
-+-- The Address Range Table acts as an adjunct to the Area
-+-- Table; It describes those Address Range Summaries that
-+-- are configured to be propagated from an Area to reduce
-+-- the amount of information about it which is known beyond
-+-- its borders.
-+
-+ ospfAreaRangeTable OBJECT-TYPE
-+ SYNTAX SEQUENCE OF OspfAreaRangeEntry
-+ MAX-ACCESS not-accessible
-+ STATUS obsolete
-+ DESCRIPTION
-+ "A range if IP addresses specified by an IP
-+ address/IP network mask pair. For example,
-+ class B address range of X.X.X.X with a network
-+ mask of 255.255.0.0 includes all IP addresses
-+ from X.X.0.0 to X.X.255.255"
-+ REFERENCE
-+ "OSPF Version 2, Appendix C.2 Area parameters"
-+ ::= { ospf 5 }
-+ ospfAreaRangeEntry OBJECT-TYPE
-+ SYNTAX OspfAreaRangeEntry
-+ MAX-ACCESS not-accessible
-+ STATUS obsolete
-+ DESCRIPTION
-+ "A range if IP addresses specified by an IP
-+ address/IP network mask pair. For example,
-+ class B address range of X.X.X.X with a network
-+ mask of 255.255.0.0 includes all IP addresses
-+ from X.X.0.0 to X.X.255.255"
-+ REFERENCE
-+ "OSPF Version 2, Appendix C.2 Area parameters"
-+ INDEX { ospfAreaRangeAreaId, ospfAreaRangeNet }
-+ ::= { ospfAreaRangeTable 1 }
-+
-+OspfAreaRangeEntry ::=
-+ SEQUENCE {
-+ ospfAreaRangeAreaId
-+ AreaID,
-+ ospfAreaRangeNet
-+ IpAddress,
-+ ospfAreaRangeMask
-+ IpAddress,
-+ ospfAreaRangeStatus
-+ RowStatus,
-+ ospfAreaRangeEffect
-+ INTEGER
-+ }
-+
-+ ospfAreaRangeAreaId OBJECT-TYPE
-+ SYNTAX AreaID
-+ MAX-ACCESS read-only
-+ STATUS obsolete
-+ DESCRIPTION
-+ "The Area the Address Range is to be found
-+ within."
-+ REFERENCE
-+ "OSPF Version 2, Appendix C.2 Area parameters"
-+ ::= { ospfAreaRangeEntry 1 }
-+
-+
-+ ospfAreaRangeNet OBJECT-TYPE
-+ SYNTAX IpAddress
-+ MAX-ACCESS read-only
-+ STATUS obsolete
-+ DESCRIPTION
-+ "The IP Address of the Net or Subnet indicated
-+ by the range."
-+ REFERENCE
-+ "OSPF Version 2, Appendix C.2 Area parameters"
-+ ::= { ospfAreaRangeEntry 2 }
-+
-+
-+ ospfAreaRangeMask OBJECT-TYPE
-+ SYNTAX IpAddress
-+ MAX-ACCESS read-create
-+ STATUS obsolete
-+ DESCRIPTION
-+ "The Subnet Mask that pertains to the Net or
-+ Subnet."
-+ REFERENCE
-+ "OSPF Version 2, Appendix C.2 Area parameters"
-+ ::= { ospfAreaRangeEntry 3 }
-+
-+ ospfAreaRangeStatus OBJECT-TYPE
-+ SYNTAX RowStatus
-+ MAX-ACCESS read-create
-+ STATUS obsolete
-+ DESCRIPTION
-+ "This variable displays the status of the en-
-+ try. Setting it to 'invalid' has the effect of
-+ rendering it inoperative. The internal effect
-+ (row removal) is implementation dependent."
-+ ::= { ospfAreaRangeEntry 4 }
-+
-+
-+ ospfAreaRangeEffect OBJECT-TYPE
-+ SYNTAX INTEGER {
-+ advertiseMatching (1),
-+ doNotAdvertiseMatching (2)
-+ }
-+ MAX-ACCESS read-create
-+ STATUS obsolete
-+ DESCRIPTION
-+ "Subnets subsumed by ranges either trigger the
-+ advertisement of the indicated summary (adver-
-+ tiseMatching), or result in the subnet's not
-+ being advertised at all outside the area."
-+ DEFVAL { advertiseMatching }
-+ ::= { ospfAreaRangeEntry 5 }
-+
-+
-+
-+-- OSPF Host Table
-+
-+-- The Host/Metric Table indicates what hosts are directly
-+-- attached to the Router, and what metrics and types of
-+-- service should be advertised for them.
-+
-+ ospfHostTable OBJECT-TYPE
-+ SYNTAX SEQUENCE OF OspfHostEntry
-+ MAX-ACCESS not-accessible
-+ STATUS current
-+ DESCRIPTION
-+ "The list of Hosts, and their metrics, that the
-+ router will advertise as host routes."
-+ REFERENCE
-+ "OSPF Version 2, Appendix C.6 Host route param-
-+ eters"
-+ ::= { ospf 6 }
-+
-+
-+ ospfHostEntry OBJECT-TYPE
-+ SYNTAX OspfHostEntry
-+ MAX-ACCESS not-accessible
-+ STATUS current
-+ DESCRIPTION
-+ "A metric to be advertised, for a given type of
-+ service, when a given host is reachable."
-+ INDEX { ospfHostIpAddress, ospfHostTOS }
-+ ::= { ospfHostTable 1 }
-+
-+OspfHostEntry ::=
-+ SEQUENCE {
-+ ospfHostIpAddress
-+ IpAddress,
-+ ospfHostTOS
-+ TOSType,
-+ ospfHostMetric
-+ Metric,
-+ ospfHostStatus
-+ RowStatus,
-+ ospfHostAreaID
-+ AreaID
-+ }
-+
-+ ospfHostIpAddress OBJECT-TYPE
-+ SYNTAX IpAddress
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "The IP Address of the Host."
-+ REFERENCE
-+ "OSPF Version 2, Appendix C.6 Host route parame-
-+ ters"
-+ ::= { ospfHostEntry 1 }
-+
-+
-+ ospfHostTOS OBJECT-TYPE
-+ SYNTAX TOSType
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "The Type of Service of the route being config-
-+ ured."
-+ REFERENCE
-+ "OSPF Version 2, Appendix C.6 Host route parame-
-+ ters"
-+ ::= { ospfHostEntry 2 }
-+
-+
-+ ospfHostMetric OBJECT-TYPE
-+ SYNTAX Metric
-+ MAX-ACCESS read-create
-+ STATUS current
-+ DESCRIPTION
-+ "The Metric to be advertised."
-+ REFERENCE
-+ "OSPF Version 2, Appendix C.6 Host route parame-
-+ ters"
-+ ::= { ospfHostEntry 3 }
-+
-+ ospfHostStatus OBJECT-TYPE
-+ SYNTAX RowStatus
-+ MAX-ACCESS read-create
-+ STATUS current
-+ DESCRIPTION
-+ "This variable displays the status of the en-
-+ try. Setting it to 'invalid' has the effect of
-+ rendering it inoperative. The internal effect
-+ (row removal) is implementation dependent."
-+ ::= { ospfHostEntry 4 }
-+
-+
-+ ospfHostAreaID OBJECT-TYPE
-+ SYNTAX AreaID
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "The Area the Host Entry is to be found within.
-+ By default, the area that a subsuming OSPF in-
-+ terface is in, or 0.0.0.0"
-+ REFERENCE
-+ "OSPF Version 2, Appendix C.2 Area parameters"
-+ ::= { ospfHostEntry 5 }
-+
-+
-+-- OSPF Interface Table
-+
-+-- The OSPF Interface Table augments the ipAddrTable
-+-- with OSPF specific information.
-+
-+ ospfIfTable OBJECT-TYPE
-+ SYNTAX SEQUENCE OF OspfIfEntry
-+ MAX-ACCESS not-accessible
-+ STATUS current
-+ DESCRIPTION
-+ "The OSPF Interface Table describes the inter-
-+ faces from the viewpoint of OSPF."
-+ REFERENCE
-+ "OSPF Version 2, Appendix C.3 Router interface
-+ parameters"
-+ ::= { ospf 7 }
-+
-+
-+ ospfIfEntry OBJECT-TYPE
-+ SYNTAX OspfIfEntry
-+ MAX-ACCESS not-accessible
-+ STATUS current
-+ DESCRIPTION
-+ "The OSPF Interface Entry describes one inter-
-+ face from the viewpoint of OSPF."
-+ INDEX { ospfIfIpAddress, ospfAddressLessIf }
-+ ::= { ospfIfTable 1 }
-+
-+OspfIfEntry ::=
-+ SEQUENCE {
-+ ospfIfIpAddress
-+ IpAddress,
-+ ospfAddressLessIf
-+ Integer32,
-+ ospfIfAreaId
-+ AreaID,
-+ ospfIfType
-+ INTEGER,
-+ ospfIfAdminStat
-+ Status,
-+ ospfIfRtrPriority
-+ DesignatedRouterPriority,
-+ ospfIfTransitDelay
-+ UpToMaxAge,
-+ ospfIfRetransInterval
-+ UpToMaxAge,
-+ ospfIfHelloInterval
-+ HelloRange,
-+ ospfIfRtrDeadInterval
-+ PositiveInteger,
-+ ospfIfPollInterval
-+ PositiveInteger,
-+ ospfIfState
-+ INTEGER,
-+ ospfIfDesignatedRouter
-+ IpAddress,
-+ ospfIfBackupDesignatedRouter
-+ IpAddress,
-+ ospfIfEvents
-+ Counter32,
-+ ospfIfAuthType
-+ INTEGER,
-+ ospfIfAuthKey
-+ OCTET STRING,
-+ ospfIfStatus
-+ RowStatus,
-+ ospfIfMulticastForwarding
-+ INTEGER,
-+ ospfIfDemand
-+ TruthValue
-+ }
-+
-+ ospfIfIpAddress OBJECT-TYPE
-+ SYNTAX IpAddress
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "The IP address of this OSPF interface."
-+ ::= { ospfIfEntry 1 }
-+
-+ ospfAddressLessIf OBJECT-TYPE
-+ SYNTAX Integer32
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "For the purpose of easing the instancing of
-+ addressed and addressless interfaces; This
-+ variable takes the value 0 on interfaces with
-+ IP Addresses, and the corresponding value of
-+ ifIndex for interfaces having no IP Address."
-+ ::= { ospfIfEntry 2 }
-+ ospfIfAreaId OBJECT-TYPE
-+ SYNTAX AreaID
-+ MAX-ACCESS read-create
-+ STATUS current
-+ DESCRIPTION
-+ "A 32-bit integer uniquely identifying the area
-+ to which the interface connects. Area ID
-+ 0.0.0.0 is used for the OSPF backbone."
-+ DEFVAL { '00000000'H } -- 0.0.0.0
-+ ::= { ospfIfEntry 3 }
-+
-+ ospfIfType OBJECT-TYPE
-+ SYNTAX INTEGER {
-+ broadcast (1),
-+ nbma (2),
-+ pointToPoint (3),
-+ pointToMultipoint (5)
-+ }
-+ MAX-ACCESS read-create
-+ STATUS current
-+ DESCRIPTION
-+ "The OSPF interface type.
-+
-+ By way of a default, this field may be intuited
-+ from the corresponding value of ifType. Broad-
-+ cast LANs, such as Ethernet and IEEE 802.5,
-+ take the value 'broadcast', X.25 and similar
-+ technologies take the value 'nbma', and links
-+ that are definitively point to point take the
-+ value 'pointToPoint'."
-+ ::= { ospfIfEntry 4 }
-+
-+
-+ ospfIfAdminStat OBJECT-TYPE
-+ SYNTAX Status
-+ MAX-ACCESS read-create
-+ STATUS current
-+ DESCRIPTION
-+ "The OSPF interface's administrative status.
-+ The value formed on the interface, and the in-
-+ terface will be advertised as an internal route
-+ to some area. The value 'disabled' denotes
-+ that the interface is external to OSPF."
-+ DEFVAL { enabled }
-+ ::= { ospfIfEntry 5 }
-+
-+ ospfIfRtrPriority OBJECT-TYPE
-+ SYNTAX DesignatedRouterPriority
-+ MAX-ACCESS read-create
-+ STATUS current
-+ DESCRIPTION
-+ "The priority of this interface. Used in
-+ multi-access networks, this field is used in
-+ the designated router election algorithm. The
-+ value 0 signifies that the router is not eligi-
-+ ble to become the designated router on this
-+ particular network. In the event of a tie in
-+ this value, routers will use their Router ID as
-+ a tie breaker."
-+ DEFVAL { 1 }
-+ ::= { ospfIfEntry 6 }
-+
-+
-+ ospfIfTransitDelay OBJECT-TYPE
-+ SYNTAX UpToMaxAge
-+ MAX-ACCESS read-create
-+ STATUS current
-+ DESCRIPTION
-+ "The estimated number of seconds it takes to
-+ transmit a link state update packet over this
-+ interface."
-+ DEFVAL { 1 }
-+ ::= { ospfIfEntry 7 }
-+
-+
-+ ospfIfRetransInterval OBJECT-TYPE
-+ SYNTAX UpToMaxAge
-+ MAX-ACCESS read-create
-+ STATUS current
-+ DESCRIPTION
-+ "The number of seconds between link-state ad-
-+ vertisement retransmissions, for adjacencies
-+ belonging to this interface. This value is
-+ also used when retransmitting database descrip-
-+ tion and link-state request packets."
-+ DEFVAL { 5 }
-+ ::= { ospfIfEntry 8 }
-+
-+
-+ ospfIfHelloInterval OBJECT-TYPE
-+ SYNTAX HelloRange
-+ MAX-ACCESS read-create
-+ STATUS current
-+ DESCRIPTION
-+ "The length of time, in seconds, between the
-+ Hello packets that the router sends on the in-
-+ terface. This value must be the same for all
-+ routers attached to a common network."
-+ DEFVAL { 10 }
-+ ::= { ospfIfEntry 9 }
-+
-+
-+ ospfIfRtrDeadInterval OBJECT-TYPE
-+ SYNTAX PositiveInteger
-+ MAX-ACCESS read-create
-+ STATUS current
-+ DESCRIPTION
-+ "The number of seconds that a router's Hello
-+ packets have not been seen before it's neigh-
-+ bors declare the router down. This should be
-+ some multiple of the Hello interval. This
-+ value must be the same for all routers attached
-+ to a common network."
-+ DEFVAL { 40 }
-+ ::= { ospfIfEntry 10 }
-+
-+
-+ ospfIfPollInterval OBJECT-TYPE
-+ SYNTAX PositiveInteger
-+ MAX-ACCESS read-create
-+ STATUS current
-+ DESCRIPTION
-+ "The larger time interval, in seconds, between
-+ the Hello packets sent to an inactive non-
-+ broadcast multi- access neighbor."
-+ DEFVAL { 120 }
-+ ::= { ospfIfEntry 11 }
-+
-+
-+ ospfIfState OBJECT-TYPE
-+ SYNTAX INTEGER {
-+ down (1),
-+ loopback (2),
-+ waiting (3),
-+ pointToPoint (4),
-+ designatedRouter (5),
-+ backupDesignatedRouter (6),
-+ otherDesignatedRouter (7)
-+ }
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "The OSPF Interface State."
-+ DEFVAL { down }
-+ ::= { ospfIfEntry 12 }
-+
-+
-+ ospfIfDesignatedRouter OBJECT-TYPE
-+ SYNTAX IpAddress
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "The IP Address of the Designated Router."
-+ DEFVAL { '00000000'H } -- 0.0.0.0
-+ ::= { ospfIfEntry 13 }
-+
-+
-+ ospfIfBackupDesignatedRouter OBJECT-TYPE
-+ SYNTAX IpAddress
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "The IP Address of the Backup Designated
-+ Router."
-+ DEFVAL { '00000000'H } -- 0.0.0.0
-+ ::= { ospfIfEntry 14 }
-+
-+ ospfIfEvents OBJECT-TYPE
-+ SYNTAX Counter32
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "The number of times this OSPF interface has
-+ changed its state, or an error has occurred."
-+ ::= { ospfIfEntry 15 }
-+
-+
-+ ospfIfAuthKey OBJECT-TYPE
-+ SYNTAX OCTET STRING (SIZE (0..256))
-+ MAX-ACCESS read-create
-+ STATUS current
-+ DESCRIPTION
-+ "The Authentication Key. If the Area's Author-
-+ ization Type is simplePassword, and the key
-+ length is shorter than 8 octets, the agent will
-+ left adjust and zero fill to 8 octets.
-+
-+ Note that unauthenticated interfaces need no
-+ authentication key, and simple password authen-
-+ tication cannot use a key of more than 8 oc-
-+ tets. Larger keys are useful only with authen-
-+ tication mechanisms not specified in this docu-
-+ ment.
-+
-+ When read, ospfIfAuthKey always returns an Oc-
-+ tet String of length zero."
-+ REFERENCE
-+ "OSPF Version 2, Section 9 The Interface Data
-+ Structure"
-+ DEFVAL { '0000000000000000'H } -- 0.0.0.0.0.0.0.0
-+ ::= { ospfIfEntry 16 }
-+
-+ ospfIfStatus OBJECT-TYPE
-+ SYNTAX RowStatus
-+ MAX-ACCESS read-create
-+ STATUS current
-+ DESCRIPTION
-+ "This variable displays the status of the en-
-+ try. Setting it to 'invalid' has the effect of
-+ rendering it inoperative. The internal effect
-+ (row removal) is implementation dependent."
-+ ::= { ospfIfEntry 17 }
-+
-+
-+ ospfIfMulticastForwarding OBJECT-TYPE
-+ SYNTAX INTEGER {
-+ blocked (1), -- no multicast forwarding
-+ multicast (2), -- using multicast address
-+ unicast (3) -- to each OSPF neighbor
-+ }
-+ MAX-ACCESS read-create
-+ STATUS current
-+ DESCRIPTION
-+ "The way multicasts should forwarded on this
-+ interface; not forwarded, forwarded as data
-+ link multicasts, or forwarded as data link uni-
-+ casts. Data link multicasting is not meaning-
-+ ful on point to point and NBMA interfaces, and
-+ setting ospfMulticastForwarding to 0 effective-
-+ ly disables all multicast forwarding."
-+ DEFVAL { blocked }
-+ ::= { ospfIfEntry 18 }
-+
-+
-+ ospfIfDemand OBJECT-TYPE
-+ SYNTAX TruthValue
-+ MAX-ACCESS read-create
-+ STATUS current
-+ DESCRIPTION
-+ "Indicates whether Demand OSPF procedures (hel-
-+ lo supression to FULL neighbors and setting the
-+ DoNotAge flag on proogated LSAs) should be per-
-+ formed on this interface."
-+ DEFVAL { false }
-+ ::= { ospfIfEntry 19 }
-+
-+
-+ ospfIfAuthType OBJECT-TYPE
-+ SYNTAX INTEGER (0..255)
-+ -- none (0),
-+ -- simplePassword (1)
-+ -- md5 (2)
-+ -- reserved for specification by IANA (> 2)
-+ MAX-ACCESS read-create
-+ STATUS current
-+ DESCRIPTION
-+ "The authentication type specified for an in-
-+ terface. Additional authentication types may
-+ be assigned locally."
-+ REFERENCE
-+ "OSPF Version 2, Appendix E Authentication"
-+ DEFVAL { 0 } -- no authentication, by default
-+ ::= { ospfIfEntry 20 }
-+
-+
-+-- OSPF Interface Metric Table
-+
-+-- The Metric Table describes the metrics to be advertised
-+-- for a specified interface at the various types of service.
-+-- As such, this table is an adjunct of the OSPF Interface
-+-- Table.
-+
-+-- Types of service, as defined by RFC 791, have the ability
-+-- to request low delay, high bandwidth, or reliable linkage.
-+
-+-- For the purposes of this specification, the measure of
-+-- bandwidth
-+
-+-- Metric = 10^8 / ifSpeed
-+
-+-- is the default value. For multiple link interfaces, note
-+-- that ifSpeed is the sum of the individual link speeds.
-+-- This yields a number having the following typical values:
-+
-+-- Network Type/bit rate Metric
-+
-+-- >= 100 MBPS 1
-+-- Ethernet/802.3 10
-+-- E1 48
-+-- T1 (ESF) 65
-+-- 64 KBPS 1562
-+-- 56 KBPS 1785
-+-- 19.2 KBPS 5208
-+-- 9.6 KBPS 10416
-+
-+-- Routes that are not specified use the default (TOS 0) metric
-+
-+ ospfIfMetricTable OBJECT-TYPE
-+ SYNTAX SEQUENCE OF OspfIfMetricEntry
-+ MAX-ACCESS not-accessible
-+ STATUS current
-+ DESCRIPTION
-+ "The TOS metrics for a non-virtual interface
-+ identified by the interface index."
-+ REFERENCE
-+ "OSPF Version 2, Appendix C.3 Router interface
-+ parameters"
-+ ::= { ospf 8 }
-+
-+ ospfIfMetricEntry OBJECT-TYPE
-+ SYNTAX OspfIfMetricEntry
-+ MAX-ACCESS not-accessible
-+ STATUS current
-+ DESCRIPTION
-+ "A particular TOS metric for a non-virtual in-
-+ terface identified by the interface index."
-+ REFERENCE
-+ "OSPF Version 2, Appendix C.3 Router interface
-+ parameters"
-+ INDEX { ospfIfMetricIpAddress,
-+ ospfIfMetricAddressLessIf,
-+ ospfIfMetricTOS }
-+ ::= { ospfIfMetricTable 1 }
-+
-+OspfIfMetricEntry ::=
-+ SEQUENCE {
-+ ospfIfMetricIpAddress
-+ IpAddress,
-+ ospfIfMetricAddressLessIf
-+ Integer32,
-+ ospfIfMetricTOS
-+ TOSType,
-+ ospfIfMetricValue
-+ Metric,
-+ ospfIfMetricStatus
-+ RowStatus
-+ }
-+
-+ ospfIfMetricIpAddress OBJECT-TYPE
-+ SYNTAX IpAddress
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "The IP address of this OSPF interface. On row
-+ creation, this can be derived from the in-
-+ stance."
-+ ::= { ospfIfMetricEntry 1 }
-+
-+ ospfIfMetricAddressLessIf OBJECT-TYPE
-+ SYNTAX Integer32
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "For the purpose of easing the instancing of
-+ addressed and addressless interfaces; This
-+ variable takes the value 0 on interfaces with
-+ IP Addresses, and the value of ifIndex for in-
-+ terfaces having no IP Address. On row crea-
-+ tion, this can be derived from the instance."
-+ ::= { ospfIfMetricEntry 2 }
-+
-+
-+ ospfIfMetricTOS OBJECT-TYPE
-+ SYNTAX TOSType
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "The type of service metric being referenced.
-+ On row creation, this can be derived from the
-+ instance."
-+ ::= { ospfIfMetricEntry 3 }
-+
-+
-+ ospfIfMetricValue OBJECT-TYPE
-+ SYNTAX Metric
-+ MAX-ACCESS read-create
-+ STATUS current
-+ DESCRIPTION
-+ "The metric of using this type of service on
-+ this interface. The default value of the TOS 0
-+ Metric is 10^8 / ifSpeed."
-+ ::= { ospfIfMetricEntry 4 }
-+
-+ ospfIfMetricStatus OBJECT-TYPE
-+ SYNTAX RowStatus
-+ MAX-ACCESS read-create
-+ STATUS current
-+ DESCRIPTION
-+ "This variable displays the status of the en-
-+ try. Setting it to 'invalid' has the effect of
-+ rendering it inoperative. The internal effect
-+ (row removal) is implementation dependent."
-+ ::= { ospfIfMetricEntry 5 }
-+
-+
-+-- OSPF Virtual Interface Table
-+
-+-- The Virtual Interface Table describes the virtual
-+-- links that the OSPF Process is configured to
-+-- carry on.
-+
-+ ospfVirtIfTable OBJECT-TYPE
-+ SYNTAX SEQUENCE OF OspfVirtIfEntry
-+ MAX-ACCESS not-accessible
-+ STATUS current
-+ DESCRIPTION
-+ "Information about this router's virtual inter-
-+ faces."
-+ REFERENCE
-+ "OSPF Version 2, Appendix C.4 Virtual link
-+ parameters"
-+ ::= { ospf 9 }
-+
-+
-+ ospfVirtIfEntry OBJECT-TYPE
-+ SYNTAX OspfVirtIfEntry
-+ MAX-ACCESS not-accessible
-+ STATUS current
-+ DESCRIPTION
-+ "Information about a single Virtual Interface."
-+ INDEX { ospfVirtIfAreaId, ospfVirtIfNeighbor }
-+ ::= { ospfVirtIfTable 1 }
-+
-+OspfVirtIfEntry ::=
-+ SEQUENCE {
-+ ospfVirtIfAreaId
-+ AreaID,
-+ ospfVirtIfNeighbor
-+ RouterID,
-+ ospfVirtIfTransitDelay
-+ UpToMaxAge,
-+ ospfVirtIfRetransInterval
-+ UpToMaxAge,
-+ ospfVirtIfHelloInterval
-+ HelloRange,
-+ ospfVirtIfRtrDeadInterval
-+ PositiveInteger,
-+ ospfVirtIfState
-+ INTEGER,
-+ ospfVirtIfEvents
-+ Counter32,
-+ ospfVirtIfAuthType
-+ INTEGER,
-+ ospfVirtIfAuthKey
-+ OCTET STRING,
-+ ospfVirtIfStatus
-+ RowStatus
-+ }
-+
-+ ospfVirtIfAreaId OBJECT-TYPE
-+ SYNTAX AreaID
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "The Transit Area that the Virtual Link
-+ traverses. By definition, this is not 0.0.0.0"
-+ ::= { ospfVirtIfEntry 1 }
-+
-+
-+ ospfVirtIfNeighbor OBJECT-TYPE
-+ SYNTAX RouterID
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "The Router ID of the Virtual Neighbor."
-+ ::= { ospfVirtIfEntry 2 }
-+
-+
-+ ospfVirtIfTransitDelay OBJECT-TYPE
-+ SYNTAX UpToMaxAge
-+ MAX-ACCESS read-create
-+ STATUS current
-+ DESCRIPTION
-+ "The estimated number of seconds it takes to
-+ transmit a link- state update packet over this
-+ interface."
-+ DEFVAL { 1 }
-+ ::= { ospfVirtIfEntry 3 }
-+
-+
-+ ospfVirtIfRetransInterval OBJECT-TYPE
-+ SYNTAX UpToMaxAge
-+ MAX-ACCESS read-create
-+ STATUS current
-+ DESCRIPTION
-+ "The number of seconds between link-state ad-
-+ vertisement retransmissions, for adjacencies
-+ belonging to this interface. This value is
-+ also used when retransmitting database descrip-
-+ tion and link-state request packets. This
-+ value should be well over the expected round-
-+ trip time."
-+ DEFVAL { 5 }
-+ ::= { ospfVirtIfEntry 4 }
-+
-+
-+ ospfVirtIfHelloInterval OBJECT-TYPE
-+ SYNTAX HelloRange
-+ MAX-ACCESS read-create
-+ STATUS current
-+ DESCRIPTION
-+ "The length of time, in seconds, between the
-+ Hello packets that the router sends on the in-
-+ terface. This value must be the same for the
-+ virtual neighbor."
-+ DEFVAL { 10 }
-+ ::= { ospfVirtIfEntry 5 }
-+
-+
-+ ospfVirtIfRtrDeadInterval OBJECT-TYPE
-+ SYNTAX PositiveInteger
-+ MAX-ACCESS read-create
-+ STATUS current
-+ DESCRIPTION
-+ "The number of seconds that a router's Hello
-+ packets have not been seen before it's neigh-
-+ bors declare the router down. This should be
-+ some multiple of the Hello interval. This
-+ value must be the same for the virtual neigh-
-+ bor."
-+ DEFVAL { 60 }
-+ ::= { ospfVirtIfEntry 6 }
-+
-+
-+ ospfVirtIfState OBJECT-TYPE
-+ SYNTAX INTEGER {
-+ down (1), -- these use the same encoding
-+ pointToPoint (4) -- as the ospfIfTable
-+ }
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "OSPF virtual interface states."
-+ DEFVAL { down }
-+ ::= { ospfVirtIfEntry 7 }
-+
-+
-+ ospfVirtIfEvents OBJECT-TYPE
-+ SYNTAX Counter32
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "The number of state changes or error events on
-+ this Virtual Link"
-+ ::= { ospfVirtIfEntry 8 }
-+
-+
-+ ospfVirtIfAuthKey OBJECT-TYPE
-+ SYNTAX OCTET STRING (SIZE(0..256))
-+ MAX-ACCESS read-create
-+ STATUS current
-+ DESCRIPTION
-+ "If Authentication Type is simplePassword, the
-+ device will left adjust and zero fill to 8 oc-
-+ tets.
-+
-+ Note that unauthenticated interfaces need no
-+ authentication key, and simple password authen-
-+ tication cannot use a key of more than 8 oc-
-+ tets. Larger keys are useful only with authen-
-+ tication mechanisms not specified in this docu-
-+ ment.
-+
-+ When read, ospfVifAuthKey always returns a
-+ string of length zero."
-+ REFERENCE
-+ "OSPF Version 2, Section 9 The Interface Data
-+ Structure"
-+ DEFVAL { '0000000000000000'H } -- 0.0.0.0.0.0.0.0
-+ ::= { ospfVirtIfEntry 9 }
-+
-+
-+ ospfVirtIfStatus OBJECT-TYPE
-+ SYNTAX RowStatus
-+ MAX-ACCESS read-create
-+ STATUS current
-+ DESCRIPTION
-+ "This variable displays the status of the en-
-+ try. Setting it to 'invalid' has the effect of
-+ rendering it inoperative. The internal effect
-+ (row removal) is implementation dependent."
-+ ::= { ospfVirtIfEntry 10 }
-+
-+
-+ ospfVirtIfAuthType OBJECT-TYPE
-+ SYNTAX INTEGER (0..255)
-+ -- none (0),
-+ -- simplePassword (1)
-+ -- md5 (2)
-+ -- reserved for specification by IANA (> 2)
-+ MAX-ACCESS read-create
-+ STATUS current
-+ DESCRIPTION
-+ "The authentication type specified for a virtu-
-+ al interface. Additional authentication types
-+ may be assigned locally."
-+ REFERENCE
-+ "OSPF Version 2, Appendix E Authentication"
-+ DEFVAL { 0 } -- no authentication, by default
-+ ::= { ospfVirtIfEntry 11 }
-+
-+
-+-- OSPF Neighbor Table
-+
-+-- The OSPF Neighbor Table describes all neighbors in
-+-- the locality of the subject router.
-+
-+ ospfNbrTable OBJECT-TYPE
-+ SYNTAX SEQUENCE OF OspfNbrEntry
-+ MAX-ACCESS not-accessible
-+ STATUS current
-+ DESCRIPTION
-+ "A table of non-virtual neighbor information."
-+ REFERENCE
-+ "OSPF Version 2, Section 10 The Neighbor Data
-+ Structure"
-+ ::= { ospf 10 }
-+
-+
-+ ospfNbrEntry OBJECT-TYPE
-+ SYNTAX OspfNbrEntry
-+ MAX-ACCESS not-accessible
-+ STATUS current
-+ DESCRIPTION
-+ "The information regarding a single neighbor."
-+ REFERENCE
-+ "OSPF Version 2, Section 10 The Neighbor Data
-+ Structure"
-+ INDEX { ospfNbrIpAddr, ospfNbrAddressLessIndex }
-+ ::= { ospfNbrTable 1 }
-+
-+OspfNbrEntry ::=
-+ SEQUENCE {
-+ ospfNbrIpAddr
-+ IpAddress,
-+ ospfNbrAddressLessIndex
-+ InterfaceIndex,
-+ ospfNbrRtrId
-+ RouterID,
-+ ospfNbrOptions
-+ Integer32,
-+ ospfNbrPriority
-+ DesignatedRouterPriority,
-+ ospfNbrState
-+ INTEGER,
-+ ospfNbrEvents
-+ Counter32,
-+ ospfNbrLsRetransQLen
-+ Gauge32,
-+ ospfNbmaNbrStatus
-+ RowStatus,
-+ ospfNbmaNbrPermanence
-+ INTEGER,
-+ ospfNbrHelloSuppressed
-+ TruthValue
-+ }
-+
-+ ospfNbrIpAddr OBJECT-TYPE
-+ SYNTAX IpAddress
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "The IP address this neighbor is using in its
-+ IP Source Address. Note that, on addressless
-+ links, this will not be 0.0.0.0, but the ad-
-+ dress of another of the neighbor's interfaces."
-+ ::= { ospfNbrEntry 1 }
-+
-+
-+ ospfNbrAddressLessIndex OBJECT-TYPE
-+ SYNTAX InterfaceIndex
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "On an interface having an IP Address, zero.
-+ On addressless interfaces, the corresponding
-+ value of ifIndex in the Internet Standard MIB.
-+ On row creation, this can be derived from the
-+ instance."
-+ ::= { ospfNbrEntry 2 }
-+
-+
-+ ospfNbrRtrId OBJECT-TYPE
-+ SYNTAX RouterID
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "A 32-bit integer (represented as a type IpAd-
-+ dress) uniquely identifying the neighboring
-+ router in the Autonomous System."
-+ DEFVAL { '00000000'H } -- 0.0.0.0
-+ ::= { ospfNbrEntry 3 }
-+
-+
-+ ospfNbrOptions OBJECT-TYPE
-+ SYNTAX Integer32
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "A Bit Mask corresponding to the neighbor's op-
-+ tions field.
-+
-+ Bit 0, if set, indicates that the system will
-+ operate on Type of Service metrics other than
-+ TOS 0. If zero, the neighbor will ignore all
-+ metrics except the TOS 0 metric.
-+
-+ Bit 1, if set, indicates that the associated
-+ area accepts and operates on external informa-
-+ tion; if zero, it is a stub area.
-+
-+ Bit 2, if set, indicates that the system is ca-
-+ pable of routing IP Multicast datagrams; i.e.,
-+ that it implements the Multicast Extensions to
-+ OSPF.
-+
-+ Bit 3, if set, indicates that the associated
-+ area is an NSSA. These areas are capable of
-+ carrying type 7 external advertisements, which
-+ are translated into type 5 external advertise-
-+ ments at NSSA borders."
-+ REFERENCE
-+ "OSPF Version 2, Section 12.1.2 Options"
-+ DEFVAL { 0 }
-+ ::= { ospfNbrEntry 4 }
-+
-+
-+ ospfNbrPriority OBJECT-TYPE
-+ SYNTAX DesignatedRouterPriority
-+ MAX-ACCESS read-create
-+ STATUS current
-+ DESCRIPTION
-+ "The priority of this neighbor in the designat-
-+ ed router election algorithm. The value 0 sig-
-+ nifies that the neighbor is not eligible to be-
-+ come the designated router on this particular
-+ network."
-+ DEFVAL { 1 }
-+ ::= { ospfNbrEntry 5 }
-+
-+
-+ ospfNbrState OBJECT-TYPE
-+ SYNTAX INTEGER {
-+ down (1),
-+ attempt (2),
-+ init (3),
-+ twoWay (4),
-+ exchangeStart (5),
-+ exchange (6),
-+ loading (7),
-+ full (8)
-+ }
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "The State of the relationship with this Neigh-
-+ bor."
-+ REFERENCE
-+ "OSPF Version 2, Section 10.1 Neighbor States"
-+ DEFVAL { down }
-+ ::= { ospfNbrEntry 6 }
-+
-+
-+ ospfNbrEvents OBJECT-TYPE
-+ SYNTAX Counter32
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "The number of times this neighbor relationship
-+ has changed state, or an error has occurred."
-+ ::= { ospfNbrEntry 7 }
-+
-+
-+ ospfNbrLsRetransQLen OBJECT-TYPE
-+ SYNTAX Gauge32
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "The current length of the retransmission
-+ queue."
-+ ::= { ospfNbrEntry 8 }
-+
-+
-+ ospfNbmaNbrStatus OBJECT-TYPE
-+ SYNTAX RowStatus
-+ MAX-ACCESS read-create
-+ STATUS current
-+ DESCRIPTION
-+ "This variable displays the status of the en-
-+ try. Setting it to 'invalid' has the effect of
-+ rendering it inoperative. The internal effect
-+ (row removal) is implementation dependent."
-+ ::= { ospfNbrEntry 9 }
-+
-+
-+ ospfNbmaNbrPermanence OBJECT-TYPE
-+ SYNTAX INTEGER {
-+ dynamic (1), -- learned through protocol
-+ permanent (2) -- configured address
-+ }
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "This variable displays the status of the en-
-+ try. 'dynamic' and 'permanent' refer to how
-+ the neighbor became known."
-+ DEFVAL { permanent }
-+ ::= { ospfNbrEntry 10 }
-+
-+
-+ ospfNbrHelloSuppressed OBJECT-TYPE
-+ SYNTAX TruthValue
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "Indicates whether Hellos are being suppressed
-+ to the neighbor"
-+ ::= { ospfNbrEntry 11 }
-+
-+
-+-- OSPF Virtual Neighbor Table
-+
-+-- This table describes all virtual neighbors.
-+-- Since Virtual Links are configured in the
-+-- virtual interface table, this table is read-only.
-+
-+ ospfVirtNbrTable OBJECT-TYPE
-+ SYNTAX SEQUENCE OF OspfVirtNbrEntry
-+ MAX-ACCESS not-accessible
-+ STATUS current
-+ DESCRIPTION
-+ "A table of virtual neighbor information."
-+ REFERENCE
-+ "OSPF Version 2, Section 15 Virtual Links"
-+ ::= { ospf 11 }
-+
-+
-+ ospfVirtNbrEntry OBJECT-TYPE
-+ SYNTAX OspfVirtNbrEntry
-+ MAX-ACCESS not-accessible
-+ STATUS current
-+ DESCRIPTION
-+ "Virtual neighbor information."
-+ INDEX { ospfVirtNbrArea, ospfVirtNbrRtrId }
-+ ::= { ospfVirtNbrTable 1 }
-+
-+OspfVirtNbrEntry ::=
-+ SEQUENCE {
-+ ospfVirtNbrArea
-+ AreaID,
-+ ospfVirtNbrRtrId
-+ RouterID,
-+ ospfVirtNbrIpAddr
-+ IpAddress,
-+ ospfVirtNbrOptions
-+ Integer32,
-+ ospfVirtNbrState
-+ INTEGER,
-+ ospfVirtNbrEvents
-+ Counter32,
-+ ospfVirtNbrLsRetransQLen
-+ Gauge32,
-+ ospfVirtNbrHelloSuppressed
-+ TruthValue
-+ }
-+
-+ ospfVirtNbrArea OBJECT-TYPE
-+ SYNTAX AreaID
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "The Transit Area Identifier."
-+ ::= { ospfVirtNbrEntry 1 }
-+
-+
-+ ospfVirtNbrRtrId OBJECT-TYPE
-+ SYNTAX RouterID
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "A 32-bit integer uniquely identifying the
-+ neighboring router in the Autonomous System."
-+ ::= { ospfVirtNbrEntry 2 }
-+
-+
-+ ospfVirtNbrIpAddr OBJECT-TYPE
-+ SYNTAX IpAddress
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "The IP address this Virtual Neighbor is us-
-+ ing."
-+ ::= { ospfVirtNbrEntry 3 }
-+
-+
-+ ospfVirtNbrOptions OBJECT-TYPE
-+ SYNTAX Integer32
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "A Bit Mask corresponding to the neighbor's op-
-+ tions field.
-+
-+ Bit 1, if set, indicates that the system will
-+ operate on Type of Service metrics other than
-+ TOS 0. If zero, the neighbor will ignore all
-+ metrics except the TOS 0 metric.
-+
-+ Bit 2, if set, indicates that the system is
-+ Network Multicast capable; ie, that it imple-
-+ ments OSPF Multicast Routing."
-+ ::= { ospfVirtNbrEntry 4 }
-+ ospfVirtNbrState OBJECT-TYPE
-+ SYNTAX INTEGER {
-+ down (1),
-+ attempt (2),
-+ init (3),
-+ twoWay (4),
-+ exchangeStart (5),
-+ exchange (6),
-+ loading (7),
-+ full (8)
-+ }
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "The state of the Virtual Neighbor Relation-
-+ ship."
-+ ::= { ospfVirtNbrEntry 5 }
-+
-+
-+ ospfVirtNbrEvents OBJECT-TYPE
-+ SYNTAX Counter32
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "The number of times this virtual link has
-+ changed its state, or an error has occurred."
-+ ::= { ospfVirtNbrEntry 6 }
-+
-+
-+ ospfVirtNbrLsRetransQLen OBJECT-TYPE
-+ SYNTAX Gauge32
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "The current length of the retransmission
-+ queue."
-+ ::= { ospfVirtNbrEntry 7 }
-+
-+
-+ ospfVirtNbrHelloSuppressed OBJECT-TYPE
-+ SYNTAX TruthValue
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "Indicates whether Hellos are being suppressed
-+ to the neighbor"
-+ ::= { ospfVirtNbrEntry 8 }
-+
-+-- OSPF Link State Database, External
-+
-+-- The Link State Database contains the Link State
-+-- Advertisements from throughout the areas that the
-+-- device is attached to.
-+
-+-- This table is identical to the OSPF LSDB Table in
-+-- format, but contains only External Link State
-+-- Advertisements. The purpose is to allow external
-+-- LSAs to be displayed once for the router rather
-+-- than once in each non-stub area.
-+
-+ ospfExtLsdbTable OBJECT-TYPE
-+ SYNTAX SEQUENCE OF OspfExtLsdbEntry
-+ MAX-ACCESS not-accessible
-+ STATUS current
-+ DESCRIPTION
-+ "The OSPF Process's Links State Database."
-+ REFERENCE
-+ "OSPF Version 2, Section 12 Link State Adver-
-+ tisements"
-+ ::= { ospf 12 }
-+
-+
-+ ospfExtLsdbEntry OBJECT-TYPE
-+ SYNTAX OspfExtLsdbEntry
-+ MAX-ACCESS not-accessible
-+ STATUS current
-+ DESCRIPTION
-+ "A single Link State Advertisement."
-+ INDEX { ospfExtLsdbType, ospfExtLsdbLsid, ospfExtLsdbRouterId }
-+ ::= { ospfExtLsdbTable 1 }
-+
-+OspfExtLsdbEntry ::=
-+ SEQUENCE {
-+ ospfExtLsdbType
-+ INTEGER,
-+ ospfExtLsdbLsid
-+ IpAddress,
-+ ospfExtLsdbRouterId
-+ RouterID,
-+ ospfExtLsdbSequence
-+ Integer32,
-+ ospfExtLsdbAge
-+ Integer32,
-+ ospfExtLsdbChecksum
-+ Integer32,
-+ ospfExtLsdbAdvertisement
-+ OCTET STRING
-+ }
-+
-+ ospfExtLsdbType OBJECT-TYPE
-+ SYNTAX INTEGER {
-+ asExternalLink (5)
-+ }
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "The type of the link state advertisement.
-+ Each link state type has a separate advertise-
-+ ment format."
-+ REFERENCE
-+ "OSPF Version 2, Appendix A.4.1 The Link State
-+ Advertisement header"
-+ ::= { ospfExtLsdbEntry 1 }
-+
-+
-+ ospfExtLsdbLsid OBJECT-TYPE
-+ SYNTAX IpAddress
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "The Link State ID is an LS Type Specific field
-+ containing either a Router ID or an IP Address;
-+ it identifies the piece of the routing domain
-+ that is being described by the advertisement."
-+ REFERENCE
-+ "OSPF Version 2, Section 12.1.4 Link State ID"
-+ ::= { ospfExtLsdbEntry 2 }
-+
-+
-+ ospfExtLsdbRouterId OBJECT-TYPE
-+ SYNTAX RouterID
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "The 32 bit number that uniquely identifies the
-+ originating router in the Autonomous System."
-+ REFERENCE
-+ "OSPF Version 2, Appendix C.1 Global parameters"
-+ ::= { ospfExtLsdbEntry 3 }
-+
-+-- Note that the OSPF Sequence Number is a 32 bit signed
-+-- integer. It starts with the value '80000001'h,
-+-- or -'7FFFFFFF'h, and increments until '7FFFFFFF'h
-+-- Thus, a typical sequence number will be very negative.
-+ ospfExtLsdbSequence OBJECT-TYPE
-+ SYNTAX Integer32
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "The sequence number field is a signed 32-bit
-+ integer. It is used to detect old and dupli-
-+ cate link state advertisements. The space of
-+ sequence numbers is linearly ordered. The
-+ larger the sequence number the more recent the
-+ advertisement."
-+ REFERENCE
-+ "OSPF Version 2, Section 12.1.6 LS sequence
-+ number"
-+ ::= { ospfExtLsdbEntry 4 }
-+
-+
-+ ospfExtLsdbAge OBJECT-TYPE
-+ SYNTAX Integer32 -- Should be 0..MaxAge
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "This field is the age of the link state adver-
-+ tisement in seconds."
-+ REFERENCE
-+ "OSPF Version 2, Section 12.1.1 LS age"
-+ ::= { ospfExtLsdbEntry 5 }
-+
-+
-+ ospfExtLsdbChecksum OBJECT-TYPE
-+ SYNTAX Integer32
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "This field is the checksum of the complete
-+ contents of the advertisement, excepting the
-+ age field. The age field is excepted so that
-+ an advertisement's age can be incremented
-+ without updating the checksum. The checksum
-+ used is the same that is used for ISO connec-
-+ tionless datagrams; it is commonly referred to
-+ as the Fletcher checksum."
-+ REFERENCE
-+ "OSPF Version 2, Section 12.1.7 LS checksum"
-+ ::= { ospfExtLsdbEntry 6 }
-+
-+
-+ ospfExtLsdbAdvertisement OBJECT-TYPE
-+ SYNTAX OCTET STRING (SIZE(36))
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "The entire Link State Advertisement, including
-+ its header."
-+ REFERENCE
-+ "OSPF Version 2, Section 12 Link State Adver-
-+ tisements"
-+ ::= { ospfExtLsdbEntry 7 }
-+
-+
-+-- OSPF Use of the CIDR Route Table
-+
-+ospfRouteGroup OBJECT IDENTIFIER ::= { ospf 13 }
-+
-+-- The IP Forwarding Table defines a number of objects for use by
-+-- the routing protocol to externalize its information. Most of
-+-- the variables (ipForwardDest, ipForwardMask, ipForwardPolicy,
-+-- ipForwardNextHop, ipForwardIfIndex, ipForwardType,
-+-- ipForwardProto, ipForwardAge, and ipForwardNextHopAS) are
-+-- defined there.
-+
-+-- Those that leave some discretion are defined here.
-+
-+-- ipCidrRouteProto is, of course, ospf (13).
-+
-+-- ipCidrRouteAge is the time since the route was first calculated,
-+-- as opposed to the time since the last SPF run.
-+
-+-- ipCidrRouteInfo is an OBJECT IDENTIFIER for use by the routing
-+-- protocol. The following values shall be found there depending
-+-- on the way the route was calculated.
-+
-+ospfIntraArea OBJECT IDENTIFIER ::= { ospfRouteGroup 1 }
-+ospfInterArea OBJECT IDENTIFIER ::= { ospfRouteGroup 2 }
-+ospfExternalType1 OBJECT IDENTIFIER ::= { ospfRouteGroup 3 }
-+ospfExternalType2 OBJECT IDENTIFIER ::= { ospfRouteGroup 4 }
-+
-+-- ipCidrRouteMetric1 is, by definition, the primary routing
-+-- metric. Therefore, it should be the metric that route
-+-- selection is based on. For intra-area and inter-area routes,
-+-- it is an OSPF metric. For External Type 1 (comparable value)
-+-- routes, it is an OSPF metric plus the External Metric. For
-+-- external Type 2 (non-comparable value) routes, it is the
-+-- external metric.
-+
-+-- ipCidrRouteMetric2 is, by definition, a secondary routing
-+-- metric. Therefore, it should be the metric that breaks a tie
-+-- among routes having equal metric1 values and the same
-+-- calculation rule. For intra-area, inter-area routes, and
-+-- External Type 1 (comparable value) routes, it is unused. For
-+-- external Type 2 (non-comparable value) routes, it is the metric
-+-- to the AS border router.
-+
-+-- ipCidrRouteMetric3, ipCidrRouteMetric4, and ipCidrRouteMetric5 are
-+-- unused.
-+
-+--
-+-- The OSPF Area Aggregate Table
-+--
-+-- This table replaces the OSPF Area Summary Table, being an
-+-- extension of that for CIDR routers.
-+
-+ ospfAreaAggregateTable OBJECT-TYPE
-+ SYNTAX SEQUENCE OF OspfAreaAggregateEntry
-+ MAX-ACCESS not-accessible
-+ STATUS current
-+ DESCRIPTION
-+ "A range of IP addresses specified by an IP
-+ address/IP network mask pair. For example,
-+ class B address range of X.X.X.X with a network
-+ mask of 255.255.0.0 includes all IP addresses
-+ from X.X.0.0 to X.X.255.255. Note that if
-+ ranges are configured such that one range sub-
-+ sumes another range (e.g., 10.0.0.0 mask
-+ 255.0.0.0 and 10.1.0.0 mask 255.255.0.0), the
-+ most specific match is the preferred one."
-+ REFERENCE
-+ "OSPF Version 2, Appendix C.2 Area parameters"
-+ ::= { ospf 14 }
-+
-+
-+ ospfAreaAggregateEntry OBJECT-TYPE
-+ SYNTAX OspfAreaAggregateEntry
-+ MAX-ACCESS not-accessible
-+ STATUS current
-+ DESCRIPTION
-+ "A range of IP addresses specified by an IP
-+ address/IP network mask pair. For example,
-+ class B address range of X.X.X.X with a network
-+ mask of 255.255.0.0 includes all IP addresses
-+ from X.X.0.0 to X.X.255.255. Note that if
-+ ranges are range configured such that one range
-+ subsumes another range (e.g., 10.0.0.0 mask
-+ 255.0.0.0 and 10.1.0.0 mask 255.255.0.0), the
-+ most specific match is the preferred one."
-+ REFERENCE
-+ "OSPF Version 2, Appendix C.2 Area parameters"
-+ INDEX { ospfAreaAggregateAreaID, ospfAreaAggregateLsdbType,
-+ ospfAreaAggregateNet, ospfAreaAggregateMask }
-+ ::= { ospfAreaAggregateTable 1 }
-+
-+
-+OspfAreaAggregateEntry ::=
-+ SEQUENCE {
-+ ospfAreaAggregateAreaID
-+ AreaID,
-+ ospfAreaAggregateLsdbType
-+ INTEGER,
-+ ospfAreaAggregateNet
-+ IpAddress,
-+ ospfAreaAggregateMask
-+ IpAddress,
-+ ospfAreaAggregateStatus
-+ RowStatus,
-+ ospfAreaAggregateEffect
-+ INTEGER
-+ }
-+
-+ ospfAreaAggregateAreaID OBJECT-TYPE
-+ SYNTAX AreaID
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "The Area the Address Aggregate is to be found
-+ within."
-+ REFERENCE
-+ "OSPF Version 2, Appendix C.2 Area parameters"
-+ ::= { ospfAreaAggregateEntry 1 }
-+
-+
-+ ospfAreaAggregateLsdbType OBJECT-TYPE
-+ SYNTAX INTEGER {
-+ summaryLink (3),
-+ nssaExternalLink (7)
-+ }
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "The type of the Address Aggregate. This field
-+ specifies the Lsdb type that this Address Ag-
-+ gregate applies to."
-+ REFERENCE
-+ "OSPF Version 2, Appendix A.4.1 The Link State
-+ Advertisement header"
-+ ::= { ospfAreaAggregateEntry 2 }
-+
-+
-+ ospfAreaAggregateNet OBJECT-TYPE
-+ SYNTAX IpAddress
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "The IP Address of the Net or Subnet indicated
-+ by the range."
-+ REFERENCE
-+ "OSPF Version 2, Appendix C.2 Area parameters"
-+ ::= { ospfAreaAggregateEntry 3 }
-+
-+
-+ ospfAreaAggregateMask OBJECT-TYPE
-+ SYNTAX IpAddress
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "The Subnet Mask that pertains to the Net or
-+ Subnet."
-+ REFERENCE
-+ "OSPF Version 2, Appendix C.2 Area parameters"
-+ ::= { ospfAreaAggregateEntry 4 }
-+
-+
-+ ospfAreaAggregateStatus OBJECT-TYPE
-+ SYNTAX RowStatus
-+ MAX-ACCESS read-create
-+ STATUS current
-+ DESCRIPTION
-+ "This variable displays the status of the en-
-+ try. Setting it to 'invalid' has the effect of
-+ rendering it inoperative. The internal effect
-+ (row removal) is implementation dependent."
-+ ::= { ospfAreaAggregateEntry 5 }
-+
-+
-+ ospfAreaAggregateEffect OBJECT-TYPE
-+ SYNTAX INTEGER {
-+ advertiseMatching (1),
-+ doNotAdvertiseMatching (2)
-+ }
-+ MAX-ACCESS read-create
-+ STATUS current
-+ DESCRIPTION
-+ "Subnets subsumed by ranges either trigger the
-+ advertisement of the indicated aggregate (ad-
-+ vertiseMatching), or result in the subnet's not
-+ being advertised at all outside the area."
-+ DEFVAL { advertiseMatching }
-+ ::= { ospfAreaAggregateEntry 6 }
-+
-+
-+-- conformance information
-+
-+ospfConformance OBJECT IDENTIFIER ::= { ospf 15 }
-+
-+ospfGroups OBJECT IDENTIFIER ::= { ospfConformance 1 }
-+ospfCompliances OBJECT IDENTIFIER ::= { ospfConformance 2 }
-+
-+-- compliance statements
-+
-+ ospfCompliance MODULE-COMPLIANCE
-+ STATUS current
-+ DESCRIPTION
-+ "The compliance statement "
-+ MODULE -- this module
-+ MANDATORY-GROUPS {
-+ ospfBasicGroup,
-+ ospfAreaGroup,
-+ ospfStubAreaGroup,
-+ ospfIfGroup,
-+ ospfIfMetricGroup,
-+ ospfVirtIfGroup,
-+ ospfNbrGroup,
-+ ospfVirtNbrGroup,
-+ ospfAreaAggregateGroup
-+ }
-+ ::= { ospfCompliances 1 }
-+
-+
-+-- units of conformance
-+
-+ ospfBasicGroup OBJECT-GROUP
-+ OBJECTS {
-+ ospfRouterId,
-+ ospfAdminStat,
-+ ospfVersionNumber,
-+ ospfAreaBdrRtrStatus,
-+ ospfASBdrRtrStatus,
-+ ospfExternLsaCount,
-+ ospfExternLsaCksumSum,
-+ ospfTOSSupport,
-+ ospfOriginateNewLsas,
-+ ospfRxNewLsas,
-+ ospfExtLsdbLimit,
-+ ospfMulticastExtensions,
-+ ospfExitOverflowInterval,
-+ ospfDemandExtensions
-+ }
-+ STATUS current
-+ DESCRIPTION
-+ "These objects are required for OSPF systems."
-+ ::= { ospfGroups 1 }
-+
-+
-+ ospfAreaGroup OBJECT-GROUP
-+ OBJECTS {
-+ ospfAreaId,
-+ ospfImportAsExtern,
-+ ospfSpfRuns,
-+ ospfAreaBdrRtrCount,
-+ ospfAsBdrRtrCount,
-+ ospfAreaLsaCount,
-+ ospfAreaLsaCksumSum,
-+ ospfAreaSummary,
-+ ospfAreaStatus
-+ }
-+ STATUS current
-+ DESCRIPTION
-+ "These objects are required for OSPF systems
-+ supporting areas."
-+ ::= { ospfGroups 2 }
-+
-+
-+ ospfStubAreaGroup OBJECT-GROUP
-+ OBJECTS {
-+ ospfStubAreaId,
-+ ospfStubTOS,
-+ ospfStubMetric,
-+ ospfStubStatus,
-+ ospfStubMetricType
-+ }
-+ STATUS current
-+ DESCRIPTION
-+ "These objects are required for OSPF systems
-+ supporting stub areas."
-+ ::= { ospfGroups 3 }
-+
-+
-+ ospfLsdbGroup OBJECT-GROUP
-+ OBJECTS {
-+ ospfLsdbAreaId,
-+ ospfLsdbType,
-+ ospfLsdbLsid,
-+ ospfLsdbRouterId,
-+ ospfLsdbSequence,
-+ ospfLsdbAge,
-+ ospfLsdbChecksum,
-+ ospfLsdbAdvertisement
-+ }
-+ STATUS current
-+ DESCRIPTION
-+ "These objects are required for OSPF systems
-+ that display their link state database."
-+ ::= { ospfGroups 4 }
-+
-+
-+ ospfAreaRangeGroup OBJECT-GROUP
-+ OBJECTS {
-+ ospfAreaRangeAreaId,
-+ ospfAreaRangeNet,
-+ ospfAreaRangeMask,
-+ ospfAreaRangeStatus,
-+ ospfAreaRangeEffect
-+ }
-+ STATUS obsolete
-+ DESCRIPTION
-+ "These objects are required for non-CIDR OSPF
-+ systems that support multiple areas."
-+ ::= { ospfGroups 5 }
-+
-+
-+ ospfHostGroup OBJECT-GROUP
-+ OBJECTS {
-+ ospfHostIpAddress,
-+ ospfHostTOS,
-+ ospfHostMetric,
-+ ospfHostStatus,
-+ ospfHostAreaID
-+ }
-+ STATUS current
-+ DESCRIPTION
-+ "These objects are required for OSPF systems
-+ that support attached hosts."
-+ ::= { ospfGroups 6 }
-+
-+
-+ ospfIfGroup OBJECT-GROUP
-+ OBJECTS {
-+ ospfIfIpAddress,
-+ ospfAddressLessIf,
-+ ospfIfAreaId,
-+ ospfIfType,
-+ ospfIfAdminStat,
-+ ospfIfRtrPriority,
-+ ospfIfTransitDelay,
-+ ospfIfRetransInterval,
-+ ospfIfHelloInterval,
-+ ospfIfRtrDeadInterval,
-+ ospfIfPollInterval,
-+ ospfIfState,
-+ ospfIfDesignatedRouter,
-+ ospfIfBackupDesignatedRouter,
-+ ospfIfEvents,
-+ ospfIfAuthType,
-+ ospfIfAuthKey,
-+ ospfIfStatus,
-+ ospfIfMulticastForwarding,
-+ ospfIfDemand
-+ }
-+ STATUS current
-+ DESCRIPTION
-+ "These objects are required for OSPF systems."
-+ ::= { ospfGroups 7 }
-+
-+
-+ ospfIfMetricGroup OBJECT-GROUP
-+ OBJECTS {
-+ ospfIfMetricIpAddress,
-+ ospfIfMetricAddressLessIf,
-+ ospfIfMetricTOS,
-+ ospfIfMetricValue,
-+ ospfIfMetricStatus
-+ }
-+ STATUS current
-+ DESCRIPTION
-+ "These objects are required for OSPF systems."
-+ ::= { ospfGroups 8 }
-+
-+
-+ ospfVirtIfGroup OBJECT-GROUP
-+ OBJECTS {
-+ ospfVirtIfAreaId,
-+ ospfVirtIfNeighbor,
-+ ospfVirtIfTransitDelay,
-+ ospfVirtIfRetransInterval,
-+ ospfVirtIfHelloInterval,
-+ ospfVirtIfRtrDeadInterval,
-+ ospfVirtIfState,
-+ ospfVirtIfEvents,
-+ ospfVirtIfAuthType,
-+ ospfVirtIfAuthKey,
-+ ospfVirtIfStatus
-+ }
-+ STATUS current
-+ DESCRIPTION
-+ "These objects are required for OSPF systems."
-+ ::= { ospfGroups 9 }
-+
-+
-+ ospfNbrGroup OBJECT-GROUP
-+ OBJECTS {
-+ ospfNbrIpAddr,
-+ ospfNbrAddressLessIndex,
-+ ospfNbrRtrId,
-+ ospfNbrOptions,
-+ ospfNbrPriority,
-+ ospfNbrState,
-+ ospfNbrEvents,
-+ ospfNbrLsRetransQLen,
-+ ospfNbmaNbrStatus,
-+ ospfNbmaNbrPermanence,
-+ ospfNbrHelloSuppressed
-+ }
-+ STATUS current
-+ DESCRIPTION
-+ "These objects are required for OSPF systems."
-+ ::= { ospfGroups 10 }
-+
-+
-+ ospfVirtNbrGroup OBJECT-GROUP
-+ OBJECTS {
-+ ospfVirtNbrArea,
-+ ospfVirtNbrRtrId,
-+ ospfVirtNbrIpAddr,
-+ ospfVirtNbrOptions,
-+ ospfVirtNbrState,
-+ ospfVirtNbrEvents,
-+ ospfVirtNbrLsRetransQLen,
-+ ospfVirtNbrHelloSuppressed
-+ }
-+ STATUS current
-+ DESCRIPTION
-+ "These objects are required for OSPF systems."
-+ ::= { ospfGroups 11 }
-+
-+
-+ ospfExtLsdbGroup OBJECT-GROUP
-+ OBJECTS {
-+ ospfExtLsdbType,
-+ ospfExtLsdbLsid,
-+ ospfExtLsdbRouterId,
-+ ospfExtLsdbSequence,
-+ ospfExtLsdbAge,
-+ ospfExtLsdbChecksum,
-+ ospfExtLsdbAdvertisement
-+ }
-+ STATUS current
-+ DESCRIPTION
-+ "These objects are required for OSPF systems
-+ that display their link state database."
-+ ::= { ospfGroups 12 }
-+
-+
-+ ospfAreaAggregateGroup OBJECT-GROUP
-+ OBJECTS {
-+ ospfAreaAggregateAreaID,
-+ ospfAreaAggregateLsdbType,
-+ ospfAreaAggregateNet,
-+ ospfAreaAggregateMask,
-+ ospfAreaAggregateStatus,
-+ ospfAreaAggregateEffect
-+ }
-+ STATUS current
-+ DESCRIPTION
-+ "These objects are required for OSPF systems."
-+ ::= { ospfGroups 13 }
-+
-+END
-diff -ruN net-snmp-5.4.1.orig/mibs/OSPF-TRAP-MIB.txt net-snmp-5.4.1/mibs/OSPF-TRAP-MIB.txt
---- net-snmp-5.4.1.orig/mibs/OSPF-TRAP-MIB.txt 1970-01-01 01:00:00.000000000 +0100
-+++ net-snmp-5.4.1/mibs/OSPF-TRAP-MIB.txt 2007-09-20 16:30:52.000000000 +0200
-@@ -0,0 +1,443 @@
-+OSPF-TRAP-MIB DEFINITIONS ::= BEGIN
-+
-+ IMPORTS
-+ MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE, IpAddress
-+ FROM SNMPv2-SMI
-+ MODULE-COMPLIANCE, OBJECT-GROUP
-+ FROM SNMPv2-CONF
-+ ospfRouterId, ospfIfIpAddress, ospfAddressLessIf, ospfIfState,
-+ ospfVirtIfAreaId, ospfVirtIfNeighbor, ospfVirtIfState,
-+ ospfNbrIpAddr, ospfNbrAddressLessIndex, ospfNbrRtrId,
-+ ospfNbrState, ospfVirtNbrArea, ospfVirtNbrRtrId, ospfVirtNbrState,
-+ ospfLsdbType, ospfLsdbLsid, ospfLsdbRouterId, ospfLsdbAreaId,
-+ ospfExtLsdbLimit, ospf
-+ FROM OSPF-MIB;
-+
-+ ospfTrap MODULE-IDENTITY
-+ LAST-UPDATED "9501201225Z" -- Fri Jan 20 12:25:50 PST 1995
-+ ORGANIZATION "IETF OSPF Working Group"
-+ CONTACT-INFO
-+ " Fred Baker
-+ Postal: Cisco Systems
-+ 519 Lado Drive
-+ Santa Barbara, California 93111
-+ Tel: +1 805 681 0115
-+ E-Mail: fred at cisco.com
-+
-+ Rob Coltun
-+ Postal: RainbowBridge Communications
-+ Tel: (301) 340-9416
-+ E-Mail: rcoltun at rainbow-bridge.com"
-+ DESCRIPTION
-+ "The MIB module to describe traps for the OSPF
-+ Version 2 Protocol."
-+ ::= { ospf 16 }
-+
-+-- Trap Support Objects
-+
-+-- The following are support objects for the OSPF traps.
-+
-+ospfTrapControl OBJECT IDENTIFIER ::= { ospfTrap 1 }
-+ospfTraps OBJECT IDENTIFIER ::= { ospfTrap 2 }
-+
-+ ospfSetTrap OBJECT-TYPE
-+ SYNTAX OCTET STRING (SIZE(4))
-+ MAX-ACCESS read-write
-+ STATUS current
-+ DESCRIPTION
-+ "A four-octet string serving as a bit map for
-+ the trap events defined by the OSPF traps. This
-+ object is used to enable and disable specific
-+ OSPF traps where a 1 in the bit field
-+ represents enabled. The right-most bit (least
-+ significant) represents trap 0."
-+ ::= { ospfTrapControl 1 }
-+
-+
-+ ospfConfigErrorType OBJECT-TYPE
-+ SYNTAX INTEGER {
-+ badVersion (1),
-+ areaMismatch (2),
-+ unknownNbmaNbr (3), -- Router is Dr eligible
-+ unknownVirtualNbr (4),
-+ authTypeMismatch(5),
-+ authFailure (6),
-+ netMaskMismatch (7),
-+ helloIntervalMismatch (8),
-+ deadIntervalMismatch (9),
-+ optionMismatch (10) }
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "Potential types of configuration conflicts.
-+ Used by the ospfConfigError and ospfConfigVir-
-+ tError traps."
-+ ::= { ospfTrapControl 2 }
-+
-+
-+ ospfPacketType OBJECT-TYPE
-+ SYNTAX INTEGER {
-+ hello (1),
-+ dbDescript (2),
-+ lsReq (3),
-+ lsUpdate (4),
-+ lsAck (5) }
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "OSPF packet types."
-+ ::= { ospfTrapControl 3 }
-+
-+
-+ ospfPacketSrc OBJECT-TYPE
-+ SYNTAX IpAddress
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "The IP address of an inbound packet that can-
-+ not be identified by a neighbor instance."
-+ ::= { ospfTrapControl 4 }
-+
-+
-+-- Traps
-+
-+
-+ ospfIfStateChange NOTIFICATION-TYPE
-+ OBJECTS {
-+ ospfRouterId, -- The originator of the trap
-+ ospfIfIpAddress,
-+ ospfAddressLessIf,
-+ ospfIfState -- The new state
-+ }
-+ STATUS current
-+ DESCRIPTION
-+ "An ospfIfStateChange trap signifies that there
-+ has been a change in the state of a non-virtual
-+ OSPF interface. This trap should be generated
-+ when the interface state regresses (e.g., goes
-+ from Dr to Down) or progresses to a terminal
-+ state (i.e., Point-to-Point, DR Other, Dr, or
-+ Backup)."
-+ ::= { ospfTraps 16 }
-+
-+
-+ ospfVirtIfStateChange NOTIFICATION-TYPE
-+ OBJECTS {
-+ ospfRouterId, -- The originator of the trap
-+ ospfVirtIfAreaId,
-+ ospfVirtIfNeighbor,
-+ ospfVirtIfState -- The new state
-+ }
-+ STATUS current
-+ DESCRIPTION
-+ "An ospfIfStateChange trap signifies that there
-+ has been a change in the state of an OSPF vir-
-+ tual interface.
-+ This trap should be generated when the inter-
-+ face state regresses (e.g., goes from Point-
-+ to-Point to Down) or progresses to a terminal
-+ state (i.e., Point-to-Point)."
-+ ::= { ospfTraps 1 }
-+
-+
-+ ospfNbrStateChange NOTIFICATION-TYPE
-+ OBJECTS {
-+ ospfRouterId, -- The originator of the trap
-+ ospfNbrIpAddr,
-+ ospfNbrAddressLessIndex,
-+ ospfNbrRtrId,
-+ ospfNbrState -- The new state
-+ }
-+ STATUS current
-+ DESCRIPTION
-+ "An ospfNbrStateChange trap signifies that
-+ there has been a change in the state of a non-
-+ virtual OSPF neighbor. This trap should be
-+ generated when the neighbor state regresses
-+ (e.g., goes from Attempt or Full to 1-Way or
-+ Down) or progresses to a terminal state (e.g.,
-+ 2-Way or Full). When an neighbor transitions
-+ from or to Full on non-broadcast multi-access
-+ and broadcast networks, the trap should be gen-
-+ erated by the designated router. A designated
-+ router transitioning to Down will be noted by
-+ ospfIfStateChange."
-+ ::= { ospfTraps 2 }
-+
-+
-+ ospfVirtNbrStateChange NOTIFICATION-TYPE
-+ OBJECTS {
-+ ospfRouterId, -- The originator of the trap
-+ ospfVirtNbrArea,
-+ ospfVirtNbrRtrId,
-+ ospfVirtNbrState -- The new state
-+ }
-+ STATUS current
-+ DESCRIPTION
-+ "An ospfIfStateChange trap signifies that there
-+ has been a change in the state of an OSPF vir-
-+ tual neighbor. This trap should be generated
-+ when the neighbor state regresses (e.g., goes
-+ from Attempt or Full to 1-Way or Down) or
-+ progresses to a terminal state (e.g., Full)."
-+ ::= { ospfTraps 3 }
-+ ospfIfConfigError NOTIFICATION-TYPE
-+ OBJECTS {
-+ ospfRouterId, -- The originator of the trap
-+ ospfIfIpAddress,
-+ ospfAddressLessIf,
-+ ospfPacketSrc, -- The source IP address
-+ ospfConfigErrorType, -- Type of error
-+ ospfPacketType
-+ }
-+ STATUS current
-+ DESCRIPTION
-+ "An ospfIfConfigError trap signifies that a
-+ packet has been received on a non-virtual in-
-+ terface from a router whose configuration
-+ parameters conflict with this router's confi-
-+ guration parameters. Note that the event op-
-+ tionMismatch should cause a trap only if it
-+ prevents an adjacency from forming."
-+ ::= { ospfTraps 4 }
-+
-+
-+ ospfVirtIfConfigError NOTIFICATION-TYPE
-+ OBJECTS {
-+ ospfRouterId, -- The originator of the trap
-+ ospfVirtIfAreaId,
-+ ospfVirtIfNeighbor,
-+ ospfConfigErrorType, -- Type of error
-+ ospfPacketType
-+ }
-+ STATUS current
-+ DESCRIPTION
-+ "An ospfConfigError trap signifies that a pack-
-+ et has been received on a virtual interface
-+ from a router whose configuration parameters
-+ conflict with this router's configuration
-+ parameters. Note that the event optionMismatch
-+ should cause a trap only if it prevents an ad-
-+ jacency from forming."
-+ ::= { ospfTraps 5 }
-+
-+
-+ ospfIfAuthFailure NOTIFICATION-TYPE
-+ OBJECTS {
-+ ospfRouterId, -- The originator of the trap
-+ ospfIfIpAddress,
-+ ospfAddressLessIf,
-+ ospfPacketSrc, -- The source IP address
-+ ospfConfigErrorType, -- authTypeMismatch or
-+ -- authFailure
-+ ospfPacketType
-+ }
-+ STATUS current
-+ DESCRIPTION
-+ "An ospfIfAuthFailure trap signifies that a
-+ packet has been received on a non-virtual in-
-+ terface from a router whose authentication key
-+ or authentication type conflicts with this
-+ router's authentication key or authentication
-+ type."
-+ ::= { ospfTraps 6 }
-+
-+
-+ ospfVirtIfAuthFailure NOTIFICATION-TYPE
-+ OBJECTS {
-+ ospfRouterId, -- The originator of the trap
-+ ospfVirtIfAreaId,
-+ ospfVirtIfNeighbor,
-+ ospfConfigErrorType, -- authTypeMismatch or
-+ -- authFailure
-+ ospfPacketType
-+ }
-+ STATUS current
-+ DESCRIPTION
-+ "An ospfVirtIfAuthFailure trap signifies that a
-+ packet has been received on a virtual interface
-+ from a router whose authentication key or au-
-+ thentication type conflicts with this router's
-+ authentication key or authentication type."
-+ ::= { ospfTraps 7 }
-+
-+
-+ ospfIfRxBadPacket NOTIFICATION-TYPE
-+ OBJECTS {
-+ ospfRouterId, -- The originator of the trap
-+ ospfIfIpAddress,
-+ ospfAddressLessIf,
-+ ospfPacketSrc, -- The source IP address
-+ ospfPacketType
-+ }
-+ STATUS current
-+ DESCRIPTION
-+ "An ospfIfRxBadPacket trap signifies that an
-+ OSPF packet has been received on a non-virtual
-+ interface that cannot be parsed."
-+ ::= { ospfTraps 8 }
-+
-+ ospfVirtIfRxBadPacket NOTIFICATION-TYPE
-+ OBJECTS {
-+ ospfRouterId, -- The originator of the trap
-+ ospfVirtIfAreaId,
-+ ospfVirtIfNeighbor,
-+ ospfPacketType
-+ }
-+ STATUS current
-+ DESCRIPTION
-+ "An ospfRxBadPacket trap signifies that an OSPF
-+ packet has been received on a virtual interface
-+ that cannot be parsed."
-+ ::= { ospfTraps 9 }
-+
-+
-+ ospfTxRetransmit NOTIFICATION-TYPE
-+ OBJECTS {
-+ ospfRouterId, -- The originator of the trap
-+ ospfIfIpAddress,
-+ ospfAddressLessIf,
-+ ospfNbrRtrId, -- Destination
-+ ospfPacketType,
-+ ospfLsdbType,
-+ ospfLsdbLsid,
-+ ospfLsdbRouterId
-+ }
-+ STATUS current
-+ DESCRIPTION
-+ "An ospfTxRetransmit trap signifies than an
-+ OSPF packet has been retransmitted on a non-
-+ virtual interface. All packets that may be re-
-+ transmitted are associated with an LSDB entry.
-+ The LS type, LS ID, and Router ID are used to
-+ identify the LSDB entry."
-+ ::= { ospfTraps 10 }
-+
-+
-+ ospfVirtIfTxRetransmit NOTIFICATION-TYPE
-+ OBJECTS {
-+ ospfRouterId, -- The originator of the trap
-+ ospfVirtIfAreaId,
-+ ospfVirtIfNeighbor,
-+ ospfPacketType,
-+ ospfLsdbType,
-+ ospfLsdbLsid,
-+ ospfLsdbRouterId
-+ }
-+ STATUS current
-+ DESCRIPTION
-+ "An ospfTxRetransmit trap signifies than an
-+ OSPF packet has been retransmitted on a virtual
-+ interface. All packets that may be retransmit-
-+ ted are associated with an LSDB entry. The LS
-+ type, LS ID, and Router ID are used to identify
-+ the LSDB entry."
-+ ::= { ospfTraps 11 }
-+
-+
-+ ospfOriginateLsa NOTIFICATION-TYPE
-+ OBJECTS {
-+ ospfRouterId, -- The originator of the trap
-+ ospfLsdbAreaId, -- 0.0.0.0 for AS Externals
-+ ospfLsdbType,
-+ ospfLsdbLsid,
-+ ospfLsdbRouterId
-+ }
-+ STATUS current
-+ DESCRIPTION
-+ "An ospfOriginateLsa trap signifies that a new
-+ LSA has been originated by this router. This
-+ trap should not be invoked for simple refreshes
-+ of LSAs (which happesn every 30 minutes), but
-+ instead will only be invoked when an LSA is
-+ (re)originated due to a topology change. Addi-
-+ tionally, this trap does not include LSAs that
-+ are being flushed because they have reached
-+ MaxAge."
-+ ::= { ospfTraps 12 }
-+
-+
-+ ospfMaxAgeLsa NOTIFICATION-TYPE
-+ OBJECTS {
-+ ospfRouterId, -- The originator of the trap
-+ ospfLsdbAreaId, -- 0.0.0.0 for AS Externals
-+ ospfLsdbType,
-+ ospfLsdbLsid,
-+ ospfLsdbRouterId
-+ }
-+ STATUS current
-+ DESCRIPTION
-+ "An ospfMaxAgeLsa trap signifies that one of
-+ the LSA in the router's link-state database has
-+ aged to MaxAge."
-+ ::= { ospfTraps 13 }
-+
-+
-+ ospfLsdbOverflow NOTIFICATION-TYPE
-+ OBJECTS {
-+ ospfRouterId, -- The originator of the trap
-+ ospfExtLsdbLimit
-+ }
-+ STATUS current
-+ DESCRIPTION
-+ "An ospfLsdbOverflow trap signifies that the
-+ number of LSAs in the router's link-state data-
-+ base has exceeded ospfExtLsdbLimit."
-+ ::= { ospfTraps 14 }
-+
-+
-+ ospfLsdbApproachingOverflow NOTIFICATION-TYPE
-+ OBJECTS {
-+ ospfRouterId, -- The originator of the trap
-+ ospfExtLsdbLimit
-+ }
-+ STATUS current
-+ DESCRIPTION
-+ "An ospfLsdbApproachingOverflow trap signifies
-+ that the number of LSAs in the router's link-
-+ state database has exceeded ninety percent of
-+ ospfExtLsdbLimit."
-+ ::= { ospfTraps 15 }
-+
-+
-+-- conformance information
-+
-+ospfTrapConformance OBJECT IDENTIFIER ::= { ospfTrap 3 }
-+
-+ospfTrapGroups OBJECT IDENTIFIER ::= { ospfTrapConformance 1 }
-+ospfTrapCompliances OBJECT IDENTIFIER ::= { ospfTrapConformance 2 }
-+
-+-- compliance statements
-+
-+ ospfTrapCompliance MODULE-COMPLIANCE
-+ STATUS current
-+ DESCRIPTION
-+ "The compliance statement "
-+ MODULE -- this module
-+ MANDATORY-GROUPS { ospfTrapControlGroup }
-+
-+
-+ GROUP ospfTrapControlGroup
-+ DESCRIPTION
-+ "This group is optional but recommended for all
-+ OSPF systems"
-+ ::= { ospfTrapCompliances 1 }
-+
-+
-+-- units of conformance
-+
-+ ospfTrapControlGroup OBJECT-GROUP
-+ OBJECTS {
-+ ospfSetTrap,
-+ ospfConfigErrorType,
-+ ospfPacketType,
-+ ospfPacketSrc
-+ }
-+ STATUS current
-+ DESCRIPTION
-+ "These objects are required to control traps
-+ from OSPF systems."
-+ ::= { ospfTrapGroups 1 }
-+
-+
-+END
-diff -ruN net-snmp-5.4.1.orig/mibs/RIPv2-MIB.txt net-snmp-5.4.1/mibs/RIPv2-MIB.txt
---- net-snmp-5.4.1.orig/mibs/RIPv2-MIB.txt 1970-01-01 01:00:00.000000000 +0100
-+++ net-snmp-5.4.1/mibs/RIPv2-MIB.txt 2007-09-20 16:30:52.000000000 +0200
-@@ -0,0 +1,530 @@
-+ RIPv2-MIB DEFINITIONS ::= BEGIN
-+
-+ IMPORTS
-+ MODULE-IDENTITY, OBJECT-TYPE, Counter32,
-+ TimeTicks, IpAddress FROM SNMPv2-SMI
-+ TEXTUAL-CONVENTION, RowStatus FROM SNMPv2-TC
-+ MODULE-COMPLIANCE, OBJECT-GROUP FROM SNMPv2-CONF
-+ mib-2 FROM RFC1213-MIB;
-+
-+ -- This MIB module uses the extended OBJECT-TYPE macro as
-+ -- defined in [9].
-+
-+ rip2 MODULE-IDENTITY
-+ LAST-UPDATED "9407272253Z" -- Wed Jul 27 22:53:04 PDT 1994
-+ ORGANIZATION "IETF RIP-II Working Group"
-+ CONTACT-INFO
-+ " Fred Baker
-+ Postal: Cisco Systems
-+ 519 Lado Drive
-+ Santa Barbara, California 93111
-+ Tel: +1 805 681 0115
-+ E-Mail: fbaker at cisco.com
-+
-+ Postal: Gary Malkin
-+ Xylogics, Inc.
-+ 53 Third Avenue
-+ Burlington, MA 01803
-+
-+ Phone: (617) 272-8140
-+ EMail: gmalkin at Xylogics.COM"
-+ DESCRIPTION
-+ "The MIB module to describe the RIP2 Version 2 Protocol"
-+ ::= { mib-2 23 }
-+
-+ -- RIP-2 Management Information Base
-+
-+ -- the RouteTag type represents the contents of the
-+ -- Route Domain field in the packet header or route entry.
-+ -- The use of the Route Domain is deprecated.
-+
-+ RouteTag ::= TEXTUAL-CONVENTION
-+ STATUS current
-+ DESCRIPTION
-+ "the RouteTag type represents the contents of the Route Domain
-+ field in the packet header or route entry"
-+ SYNTAX OCTET STRING (SIZE (2))
-+
-+--4.1 Global Counters
-+
-+-- The RIP-2 Globals Group.
-+-- Implementation of this group is mandatory for systems
-+-- which implement RIP-2.
-+
-+-- These counters are intended to facilitate debugging quickly
-+-- changing routes or failing neighbors
-+
-+rip2Globals OBJECT IDENTIFIER ::= { rip2 1 }
-+
-+ rip2GlobalRouteChanges OBJECT-TYPE
-+ SYNTAX Counter32
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "The number of route changes made to the IP Route
-+ Database by RIP. This does not include the refresh
-+ of a route's age."
-+ ::= { rip2Globals 1 }
-+
-+ rip2GlobalQueries OBJECT-TYPE
-+ SYNTAX Counter32
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "The number of responses sent to RIP queries
-+ from other systems."
-+ ::= { rip2Globals 2 }
-+
-+--4.2 RIP Interface Tables
-+
-+-- RIP Interfaces Groups
-+-- Implementation of these Groups is mandatory for systems
-+-- which implement RIP-2.
-+
-+-- The RIP Interface Status Table.
-+
-+ rip2IfStatTable OBJECT-TYPE
-+ SYNTAX SEQUENCE OF Rip2IfStatEntry
-+ MAX-ACCESS not-accessible
-+ STATUS current
-+ DESCRIPTION
-+ "A list of subnets which require separate
-+ status monitoring in RIP."
-+ ::= { rip2 2 }
-+
-+ rip2IfStatEntry OBJECT-TYPE
-+ SYNTAX Rip2IfStatEntry
-+ MAX-ACCESS not-accessible
-+ STATUS current
-+ DESCRIPTION
-+ "A Single Routing Domain in a single Subnet."
-+ INDEX { rip2IfStatAddress }
-+ ::= { rip2IfStatTable 1 }
-+
-+ Rip2IfStatEntry ::=
-+ SEQUENCE {
-+ rip2IfStatAddress
-+ IpAddress,
-+ rip2IfStatRcvBadPackets
-+ Counter32,
-+ rip2IfStatRcvBadRoutes
-+ Counter32,
-+ rip2IfStatSentUpdates
-+ Counter32,
-+ rip2IfStatStatus
-+ RowStatus
-+ }
-+
-+ rip2IfStatAddress OBJECT-TYPE
-+ SYNTAX IpAddress
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "The IP Address of this system on the indicated
-+ subnet. For unnumbered interfaces, the value 0.0.0.N,
-+ where the least significant 24 bits (N) is the ifIndex
-+ for the IP Interface in network byte order."
-+ ::= { rip2IfStatEntry 1 }
-+
-+ rip2IfStatRcvBadPackets OBJECT-TYPE
-+ SYNTAX Counter32
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "The number of RIP response packets received by
-+ the RIP process which were subsequently discarded
-+ for any reason (e.g. a version 0 packet, or an
-+ unknown command type)."
-+ ::= { rip2IfStatEntry 2 }
-+
-+ rip2IfStatRcvBadRoutes OBJECT-TYPE
-+ SYNTAX Counter32
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "The number of routes, in valid RIP packets,
-+ which were ignored for any reason (e.g. unknown
-+ address family, or invalid metric)."
-+ ::= { rip2IfStatEntry 3 }
-+
-+ rip2IfStatSentUpdates OBJECT-TYPE
-+ SYNTAX Counter32
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "The number of triggered RIP updates actually
-+ sent on this interface. This explicitly does
-+ NOT include full updates sent containing new
-+ information."
-+ ::= { rip2IfStatEntry 4 }
-+
-+ rip2IfStatStatus OBJECT-TYPE
-+ SYNTAX RowStatus
-+ MAX-ACCESS read-create
-+ STATUS current
-+ DESCRIPTION
-+ "Writing invalid has the effect of deleting
-+ this interface."
-+ ::= { rip2IfStatEntry 5 }
-+
-+-- The RIP Interface Configuration Table.
-+
-+ rip2IfConfTable OBJECT-TYPE
-+ SYNTAX SEQUENCE OF Rip2IfConfEntry
-+ MAX-ACCESS not-accessible
-+ STATUS current
-+ DESCRIPTION
-+ "A list of subnets which require separate
-+ configuration in RIP."
-+ ::= { rip2 3 }
-+
-+ rip2IfConfEntry OBJECT-TYPE
-+ SYNTAX Rip2IfConfEntry
-+ MAX-ACCESS not-accessible
-+ STATUS current
-+ DESCRIPTION
-+ "A Single Routing Domain in a single Subnet."
-+ INDEX { rip2IfConfAddress }
-+ ::= { rip2IfConfTable 1 }
-+
-+ Rip2IfConfEntry ::=
-+ SEQUENCE {
-+ rip2IfConfAddress
-+ IpAddress,
-+ rip2IfConfDomain
-+ RouteTag,
-+ rip2IfConfAuthType
-+ INTEGER,
-+ rip2IfConfAuthKey
-+ OCTET STRING (SIZE(0..16)),
-+ rip2IfConfSend
-+ INTEGER,
-+ rip2IfConfReceive
-+ INTEGER,
-+ rip2IfConfDefaultMetric
-+ INTEGER,
-+ rip2IfConfStatus
-+ RowStatus,
-+ rip2IfConfSrcAddress
-+ IpAddress
-+ }
-+
-+ rip2IfConfAddress OBJECT-TYPE
-+ SYNTAX IpAddress
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "The IP Address of this system on the indicated
-+ subnet. For unnumbered interfaces, the value 0.0.0.N,
-+ where the least significant 24 bits (N) is the ifIndex
-+ for the IP Interface in network byte order."
-+ ::= { rip2IfConfEntry 1 }
-+
-+ rip2IfConfDomain OBJECT-TYPE
-+ SYNTAX RouteTag
-+ MAX-ACCESS read-create
-+ STATUS obsolete
-+ DESCRIPTION
-+ "Value inserted into the Routing Domain field
-+ of all RIP packets sent on this interface."
-+ DEFVAL { '0000'h }
-+ ::= { rip2IfConfEntry 2 }
-+
-+ rip2IfConfAuthType OBJECT-TYPE
-+ SYNTAX INTEGER {
-+ noAuthentication (1),
-+ simplePassword (2),
-+ md5 (3)
-+ }
-+ MAX-ACCESS read-create
-+ STATUS current
-+ DESCRIPTION
-+ "The type of Authentication used on this
-+ interface."
-+ DEFVAL { noAuthentication }
-+ ::= { rip2IfConfEntry 3 }
-+
-+ rip2IfConfAuthKey OBJECT-TYPE
-+ SYNTAX OCTET STRING (SIZE(0..16))
-+ MAX-ACCESS read-create
-+ STATUS current
-+ DESCRIPTION
-+ "The value to be used as the Authentication Key
-+ whenever the corresponding instance of
-+ rip2IfConfAuthType has a value other than
-+ noAuthentication. A modification of the corresponding
-+ instance of rip2IfConfAuthType does not modify
-+ the rip2IfConfAuthKey value. If a string shorter
-+ than 16 octets is supplied, it will be left-
-+ justified and padded to 16 octets, on the right,
-+ with nulls (0x00).
-+
-+ Reading this object always results in an OCTET
-+ STRING of length zero; authentication may not
-+ be bypassed by reading the MIB object."
-+ DEFVAL { ''h }
-+ ::= { rip2IfConfEntry 4 }
-+
-+ rip2IfConfSend OBJECT-TYPE
-+ SYNTAX INTEGER {
-+ doNotSend (1),
-+ ripVersion1 (2),
-+ rip1Compatible (3),
-+ ripVersion2 (4),
-+ ripV1Demand (5),
-+ ripV2Demand (6)
-+ }
-+ MAX-ACCESS read-create
-+ STATUS current
-+ DESCRIPTION
-+ "What the router sends on this interface.
-+ ripVersion1 implies sending RIP updates compliant
-+ with RFC 1058. rip1Compatible implies
-+ broadcasting RIP-2 updates using RFC 1058 route
-+ subsumption rules. ripVersion2 implies
-+ multicasting RIP-2 updates. ripV1Demand indicates
-+ the use of Demand RIP on a WAN interface under RIP
-+ Version 1 rules. ripV2Demand indicates the use of
-+ Demand RIP on a WAN interface under Version 2 rules."
-+ DEFVAL { rip1Compatible }
-+ ::= { rip2IfConfEntry 5 }
-+
-+ rip2IfConfReceive OBJECT-TYPE
-+ SYNTAX INTEGER {
-+ rip1 (1),
-+ rip2 (2),
-+ rip1OrRip2 (3),
-+ doNotRecieve (4)
-+ }
-+ MAX-ACCESS read-create
-+ STATUS current
-+ DESCRIPTION
-+ "This indicates which version of RIP updates
-+ are to be accepted. Note that rip2 and
-+ rip1OrRip2 implies reception of multicast
-+ packets."
-+ DEFVAL { rip1OrRip2 }
-+ ::= { rip2IfConfEntry 6 }
-+
-+ rip2IfConfDefaultMetric OBJECT-TYPE
-+ SYNTAX INTEGER ( 0..15 )
-+ MAX-ACCESS read-create
-+ STATUS current
-+ DESCRIPTION
-+ "This variable indicates the metric that is to
-+ be used for the default route entry in RIP updates
-+ originated on this interface. A value of zero
-+ indicates that no default route should be
-+ originated; in this case, a default route via
-+ another router may be propagated."
-+ ::= { rip2IfConfEntry 7 }
-+
-+ rip2IfConfStatus OBJECT-TYPE
-+ SYNTAX RowStatus
-+ MAX-ACCESS read-create
-+ STATUS current
-+ DESCRIPTION
-+ "Writing invalid has the effect of deleting
-+ this interface."
-+ ::= { rip2IfConfEntry 8 }
-+
-+ rip2IfConfSrcAddress OBJECT-TYPE
-+ SYNTAX IpAddress
-+ MAX-ACCESS read-create
-+ STATUS current
-+ DESCRIPTION
-+ "The IP Address this system will use as a source
-+ address on this interface. If it is a numbered
-+ interface, this MUST be the same value as
-+ rip2IfConfAddress. On unnumbered interfaces,
-+ it must be the value of rip2IfConfAddress for
-+ some interface on the system."
-+ ::= { rip2IfConfEntry 9 }
-+
-+--4.3 Peer Table
-+
-+-- Peer Table
-+
-+-- The RIP Peer Group
-+-- Implementation of this Group is Optional
-+
-+-- This group provides information about active peer
-+-- relationships intended to assist in debugging. An
-+-- active peer is a router from which a valid RIP
-+-- updated has been heard in the last 180 seconds.
-+
-+ rip2PeerTable OBJECT-TYPE
-+ SYNTAX SEQUENCE OF Rip2PeerEntry
-+ MAX-ACCESS not-accessible
-+ STATUS current
-+ DESCRIPTION
-+ "A list of RIP Peers."
-+ ::= { rip2 4 }
-+
-+ rip2PeerEntry OBJECT-TYPE
-+ SYNTAX Rip2PeerEntry
-+ MAX-ACCESS not-accessible
-+ STATUS current
-+ DESCRIPTION
-+ "Information regarding a single routing peer."
-+ INDEX { rip2PeerAddress, rip2PeerDomain }
-+ ::= { rip2PeerTable 1 }
-+
-+ Rip2PeerEntry ::=
-+ SEQUENCE {
-+ rip2PeerAddress
-+ IpAddress,
-+ rip2PeerDomain
-+ RouteTag,
-+ rip2PeerLastUpdate
-+ TimeTicks,
-+ rip2PeerVersion
-+ INTEGER,
-+ rip2PeerRcvBadPackets
-+ Counter32,
-+ rip2PeerRcvBadRoutes
-+ Counter32
-+ }
-+
-+ rip2PeerAddress OBJECT-TYPE
-+ SYNTAX IpAddress
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "The IP Address that the peer is using as its source
-+ address. Note that on an unnumbered link, this may
-+ not be a member of any subnet on the system."
-+ ::= { rip2PeerEntry 1 }
-+
-+ rip2PeerDomain OBJECT-TYPE
-+ SYNTAX RouteTag
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "The value in the Routing Domain field in RIP
-+ packets received from the peer. As domain suuport
-+ is deprecated, this must be zero."
-+ ::= { rip2PeerEntry 2 }
-+
-+ rip2PeerLastUpdate OBJECT-TYPE
-+ SYNTAX TimeTicks
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "The value of sysUpTime when the most recent
-+ RIP update was received from this system."
-+ ::= { rip2PeerEntry 3 }
-+
-+ rip2PeerVersion OBJECT-TYPE
-+ SYNTAX INTEGER ( 0..255 )
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "The RIP version number in the header of the
-+ last RIP packet received."
-+ ::= { rip2PeerEntry 4 }
-+
-+ rip2PeerRcvBadPackets OBJECT-TYPE
-+ SYNTAX Counter32
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "The number of RIP response packets from this
-+ peer discarded as invalid."
-+ ::= { rip2PeerEntry 5 }
-+
-+
-+ rip2PeerRcvBadRoutes OBJECT-TYPE
-+ SYNTAX Counter32
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "The number of routes from this peer that were
-+ ignored because the entry format was invalid."
-+ ::= { rip2PeerEntry 6 }
-+
-+-- conformance information
-+
-+rip2Conformance OBJECT IDENTIFIER ::= { rip2 5 }
-+
-+rip2Groups OBJECT IDENTIFIER ::= { rip2Conformance 1 }
-+rip2Compliances OBJECT IDENTIFIER ::= { rip2Conformance 2 }
-+
-+-- compliance statements
-+rip2Compliance MODULE-COMPLIANCE
-+ STATUS current
-+ DESCRIPTION
-+ "The compliance statement "
-+ MODULE -- this module
-+ MANDATORY-GROUPS {
-+ rip2GlobalGroup,
-+ rip2IfStatGroup,
-+ rip2IfConfGroup,
-+ rip2PeerGroup
-+ }
-+ GROUP rip2GlobalGroup
-+ DESCRIPTION
-+ "This group defines global controls for RIP-II systems."
-+ GROUP rip2IfStatGroup
-+ DESCRIPTION
-+ "This group defines interface statistics for RIP-II systems."
-+ GROUP rip2IfConfGroup
-+ DESCRIPTION
-+ "This group defines interface configuration for RIP-II systems."
-+ GROUP rip2PeerGroup
-+ DESCRIPTION
-+ "This group defines peer information for RIP-II systems."
-+ ::= { rip2Compliances 1 }
-+
-+-- units of conformance
-+
-+rip2GlobalGroup OBJECT-GROUP
-+ OBJECTS {
-+ rip2GlobalRouteChanges,
-+ rip2GlobalQueries
-+ }
-+ STATUS current
-+ DESCRIPTION
-+ "This group defines global controls for RIP-II systems."
-+ ::= { rip2Groups 1 }
-+rip2IfStatGroup OBJECT-GROUP
-+ OBJECTS {
-+ rip2IfStatAddress,
-+ rip2IfStatRcvBadPackets,
-+ rip2IfStatRcvBadRoutes,
-+ rip2IfStatSentUpdates,
-+ rip2IfStatStatus
-+ }
-+ STATUS current
-+ DESCRIPTION
-+ "This group defines interface statistics for RIP-II systems."
-+ ::= { rip2Groups 2 }
-+rip2IfConfGroup OBJECT-GROUP
-+ OBJECTS {
-+ rip2IfConfAddress,
-+ rip2IfConfAuthType,
-+ rip2IfConfAuthKey,
-+ rip2IfConfSend,
-+ rip2IfConfReceive,
-+ rip2IfConfDefaultMetric,
-+ rip2IfConfStatus,
-+ rip2IfConfSrcAddress
-+ }
-+ STATUS current
-+ DESCRIPTION
-+ "This group defines interface configuration for RIP-II systems."
-+ ::= { rip2Groups 3 }
-+rip2PeerGroup OBJECT-GROUP
-+ OBJECTS {
-+ rip2PeerAddress,
-+ rip2PeerDomain,
-+ rip2PeerLastUpdate,
-+ rip2PeerVersion,
-+ rip2PeerRcvBadPackets,
-+ rip2PeerRcvBadRoutes
-+ }
-+ STATUS current
-+ DESCRIPTION
-+ "This group defines peer information for RIP-II systems."
-+ ::= { rip2Groups 4 }
-+END
-diff -ruN net-snmp-5.4.1.orig/mibs/SOURCE-ROUTING-MIB.txt net-snmp-5.4.1/mibs/SOURCE-ROUTING-MIB.txt
---- net-snmp-5.4.1.orig/mibs/SOURCE-ROUTING-MIB.txt 1970-01-01 01:00:00.000000000 +0100
-+++ net-snmp-5.4.1/mibs/SOURCE-ROUTING-MIB.txt 2007-09-20 16:30:52.000000000 +0200
-@@ -0,0 +1,452 @@
-+SOURCE-ROUTING-MIB DEFINITIONS ::= BEGIN
-+
-+IMPORTS
-+ Counter, Gauge
-+ FROM RFC1155-SMI
-+ dot1dBridge, dot1dSr
-+ FROM BRIDGE-MIB
-+ OBJECT-TYPE
-+ FROM RFC-1212;
-+
-+-- groups in the SR MIB
-+
-+-- dot1dSr is imported from the Bridge MIB
-+
-+dot1dPortPair OBJECT IDENTIFIER ::= { dot1dBridge 10 }
-+
-+-- the dot1dSr group
-+
-+-- this group is implemented by those bridges that
-+-- support the source route bridging mode, including Source
-+-- Routing and SRT bridges.
-+
-+dot1dSrPortTable OBJECT-TYPE
-+ SYNTAX SEQUENCE OF Dot1dSrPortEntry
-+ ACCESS not-accessible
-+ STATUS mandatory
-+ DESCRIPTION
-+ "A table that contains information about every
-+ port that is associated with this source route
-+ bridge."
-+ ::= { dot1dSr 1 }
-+
-+dot1dSrPortEntry OBJECT-TYPE
-+ SYNTAX Dot1dSrPortEntry
-+ ACCESS not-accessible
-+ STATUS mandatory
-+ DESCRIPTION
-+ "A list of information for each port of a source
-+ route bridge."
-+ INDEX { dot1dSrPort }
-+
-+ ::= { dot1dSrPortTable 1 }
-+
-+Dot1dSrPortEntry ::=
-+ SEQUENCE {
-+ dot1dSrPort
-+ INTEGER,
-+ dot1dSrPortHopCount
-+ INTEGER,
-+ dot1dSrPortLocalSegment
-+ INTEGER,
-+ dot1dSrPortBridgeNum
-+ INTEGER,
-+ dot1dSrPortTargetSegment
-+ INTEGER,
-+ dot1dSrPortLargestFrame
-+ INTEGER,
-+ dot1dSrPortSTESpanMode
-+ INTEGER,
-+ dot1dSrPortSpecInFrames
-+ Counter,
-+ dot1dSrPortSpecOutFrames
-+ Counter,
-+ dot1dSrPortApeInFrames
-+ Counter,
-+ dot1dSrPortApeOutFrames
-+ Counter,
-+ dot1dSrPortSteInFrames
-+ Counter,
-+ dot1dSrPortSteOutFrames
-+ Counter,
-+ dot1dSrPortSegmentMismatchDiscards
-+ Counter,
-+ dot1dSrPortDuplicateSegmentDiscards
-+ Counter,
-+ dot1dSrPortHopCountExceededDiscards
-+ Counter,
-+ dot1dSrPortDupLanIdOrTreeErrors
-+ Counter,
-+ dot1dSrPortLanIdMismatches
-+ Counter
-+ }
-+
-+dot1dSrPort OBJECT-TYPE
-+ SYNTAX INTEGER (1..65535)
-+ ACCESS read-only
-+ STATUS mandatory
-+ DESCRIPTION
-+ "The port number of the port for which this entry
-+
-+ contains Source Route management information."
-+ ::= { dot1dSrPortEntry 1 }
-+
-+dot1dSrPortHopCount OBJECT-TYPE
-+ SYNTAX INTEGER
-+ ACCESS read-write
-+ STATUS mandatory
-+ DESCRIPTION
-+ "The maximum number of routing descriptors allowed
-+ in an All Paths or Spanning Tree Explorer frames."
-+ ::= { dot1dSrPortEntry 2 }
-+
-+dot1dSrPortLocalSegment OBJECT-TYPE
-+ SYNTAX INTEGER
-+ ACCESS read-write
-+ STATUS mandatory
-+ DESCRIPTION
-+ "The segment number that uniquely identifies the
-+ segment to which this port is connected. Current
-+ source routing protocols limit this value to the
-+ range: 0 through 4095. (The value 0 is used by
-+ some management applications for special test
-+ cases.) A value of 65535 signifies that no segment
-+ number is assigned to this port."
-+ ::= { dot1dSrPortEntry 3 }
-+
-+dot1dSrPortBridgeNum OBJECT-TYPE
-+ SYNTAX INTEGER
-+ ACCESS read-write
-+ STATUS mandatory
-+ DESCRIPTION
-+ "A bridge number uniquely identifies a bridge when
-+ more than one bridge is used to span the same two
-+ segments. Current source routing protocols limit
-+ this value to the range: 0 through 15. A value of
-+ 65535 signifies that no bridge number is assigned
-+ to this bridge."
-+ ::= { dot1dSrPortEntry 4 }
-+
-+dot1dSrPortTargetSegment OBJECT-TYPE
-+ SYNTAX INTEGER
-+ ACCESS read-write
-+ STATUS mandatory
-+ DESCRIPTION
-+ "The segment number that corresponds to the target
-+ segment this port is considered to be connected to
-+ by the bridge. Current source routing protocols
-+ limit this value to the range: 0 through 4095.
-+
-+ (The value 0 is used by some management
-+ applications for special test cases.) A value of
-+ 65535 signifies that no target segment is assigned
-+ to this port."
-+ ::= { dot1dSrPortEntry 5 }
-+
-+-- It would be nice if we could use ifMtu as the size of the
-+-- largest frame, but we can't because ifMtu is defined to be
-+-- the size that the (inter-)network layer can use which can
-+-- differ from the MAC layer (especially if several layers of
-+-- encapsulation are used).
-+
-+dot1dSrPortLargestFrame OBJECT-TYPE
-+ SYNTAX INTEGER
-+ ACCESS read-write
-+ STATUS mandatory
-+ DESCRIPTION
-+ "The maximum size of the INFO field (LLC and
-+ above) that this port can send/receive. It does
-+ not include any MAC level (framing) octets. The
-+ value of this object is used by this bridge to
-+ determine whether a modification of the
-+ LargestFrame (LF, see [14]) field of the Routing
-+ Control field of the Routing Information Field is
-+ necessary.
-+
-+ 64 valid values are defined by the IEEE 802.5M SRT
-+ Addendum: 516, 635, 754, 873, 993, 1112, 1231,
-+ 1350, 1470, 1542, 1615, 1688, 1761, 1833, 1906,
-+ 1979, 2052, 2345, 2638, 2932, 3225, 3518, 3812,
-+ 4105, 4399, 4865, 5331, 5798, 6264, 6730, 7197,
-+ 7663, 8130, 8539, 8949, 9358, 9768, 10178, 10587,
-+ 10997, 11407, 12199, 12992, 13785, 14578, 15370,
-+ 16163, 16956, 17749, 20730, 23711, 26693, 29674,
-+ 32655, 35637, 38618, 41600, 44591, 47583, 50575,
-+ 53567, 56559, 59551, and 65535.
-+
-+ An illegal value will not be accepted by the
-+ bridge."
-+ ::= { dot1dSrPortEntry 6 }
-+
-+dot1dSrPortSTESpanMode OBJECT-TYPE
-+ SYNTAX INTEGER {
-+ auto-span(1),
-+ disabled(2),
-+ forced(3)
-+ }
-+ ACCESS read-write
-+ STATUS mandatory
-+ DESCRIPTION
-+ "Determines how this port behaves when presented
-+ with a Spanning Tree Explorer frame. The value
-+ 'disabled(2)' indicates that the port will not
-+ accept or send Spanning Tree Explorer packets; any
-+ STE packets received will be silently discarded.
-+ The value 'forced(3)' indicates the port will
-+ always accept and propagate Spanning Tree Explorer
-+ frames. This allows a manually configured
-+ Spanning Tree for this class of packet to be
-+ configured. Note that unlike transparent
-+ bridging, this is not catastrophic to the network
-+ if there are loops. The value 'auto-span(1)' can
-+ only be returned by a bridge that both implements
-+ the Spanning Tree Protocol and has use of the
-+ protocol enabled on this port. The behavior of the
-+ port for Spanning Tree Explorer frames is
-+ determined by the state of dot1dStpPortState. If
-+ the port is in the 'forwarding' state, the frame
-+ will be accepted or propagated. Otherwise, it
-+ will be silently discarded."
-+ ::= { dot1dSrPortEntry 7 }
-+
-+dot1dSrPortSpecInFrames OBJECT-TYPE
-+ SYNTAX Counter
-+ ACCESS read-only
-+ STATUS mandatory
-+ DESCRIPTION
-+ "The number of Specifically Routed frames, also
-+ referred to as Source Routed Frames, that have
-+ been received from this port's segment."
-+ ::= { dot1dSrPortEntry 8 }
-+
-+dot1dSrPortSpecOutFrames OBJECT-TYPE
-+ SYNTAX Counter
-+ ACCESS read-only
-+ STATUS mandatory
-+ DESCRIPTION
-+ "The number of Specifically Routed frames, also
-+ referred to as Source Routed Frames, that this
-+ port has transmitted on its segment."
-+ ::= { dot1dSrPortEntry 9 }
-+
-+dot1dSrPortApeInFrames OBJECT-TYPE
-+ SYNTAX Counter
-+ ACCESS read-only
-+ STATUS mandatory
-+ DESCRIPTION
-+ "The number of All Paths Explorer frames, also
-+ referred to as All Routes Explorer frames, that
-+ have been received by this port from its segment."
-+ ::= { dot1dSrPortEntry 10 }
-+
-+dot1dSrPortApeOutFrames OBJECT-TYPE
-+ SYNTAX Counter
-+ ACCESS read-only
-+ STATUS mandatory
-+ DESCRIPTION
-+ "The number of all Paths Explorer Frames, also
-+ referred to as All Routes Explorer frames, that
-+ have been transmitted by this port on its
-+ segment."
-+ ::= { dot1dSrPortEntry 11 }
-+
-+dot1dSrPortSteInFrames OBJECT-TYPE
-+ SYNTAX Counter
-+ ACCESS read-only
-+ STATUS mandatory
-+ DESCRIPTION
-+ "The number of spanning tree explorer frames that
-+ have been received by this port from its segment."
-+ ::= { dot1dSrPortEntry 12 }
-+
-+dot1dSrPortSteOutFrames OBJECT-TYPE
-+ SYNTAX Counter
-+ ACCESS read-only
-+ STATUS mandatory
-+ DESCRIPTION
-+ "The number of spanning tree explorer frames that
-+ have been transmitted by this port on its
-+ segment."
-+ ::= { dot1dSrPortEntry 13 }
-+
-+dot1dSrPortSegmentMismatchDiscards OBJECT-TYPE
-+ SYNTAX Counter
-+ ACCESS read-only
-+ STATUS mandatory
-+ DESCRIPTION
-+ "The number of explorer frames that have been
-+ discarded by this port because the routing
-+ descriptor field contained an invalid adjacent
-+ segment value."
-+ ::= { dot1dSrPortEntry 14 }
-+
-+dot1dSrPortDuplicateSegmentDiscards OBJECT-TYPE
-+ SYNTAX Counter
-+ ACCESS read-only
-+ STATUS mandatory
-+ DESCRIPTION
-+ "The number of frames that have been discarded by
-+ this port because the routing descriptor field
-+ contained a duplicate segment identifier."
-+ ::= { dot1dSrPortEntry 15 }
-+
-+dot1dSrPortHopCountExceededDiscards OBJECT-TYPE
-+ SYNTAX Counter
-+ ACCESS read-only
-+ STATUS mandatory
-+ DESCRIPTION
-+ "The number of explorer frames that have been
-+ discarded by this port because the Routing
-+ Information Field has exceeded the maximum route
-+ descriptor length."
-+ ::= { dot1dSrPortEntry 16 }
-+
-+dot1dSrPortDupLanIdOrTreeErrors OBJECT-TYPE
-+ SYNTAX Counter
-+ ACCESS read-only
-+ STATUS mandatory
-+ DESCRIPTION
-+ "The number of duplicate LAN IDs or Tree errors.
-+ This helps in detection of problems in networks
-+ containing older IBM Source Routing Bridges."
-+ ::= { dot1dSrPortEntry 17 }
-+
-+dot1dSrPortLanIdMismatches OBJECT-TYPE
-+ SYNTAX Counter
-+ ACCESS read-only
-+ STATUS mandatory
-+ DESCRIPTION
-+ "The number of ARE and STE frames that were
-+ discarded because the last LAN ID in the routing
-+ information field did not equal the LAN-in ID.
-+ This error can occur in implementations which do
-+ only a LAN-in ID and Bridge Number check instead
-+ of a LAN-in ID, Bridge Number, and LAN-out ID
-+ check before they forward broadcast frames."
-+ ::= { dot1dSrPortEntry 18 }
-+
-+-- scalar object in dot1dSr
-+
-+dot1dSrBridgeLfMode OBJECT-TYPE
-+ SYNTAX INTEGER {
-+ mode3(1),
-+ mode6(2)
-+ }
-+ ACCESS read-write
-+ STATUS mandatory
-+ DESCRIPTION
-+ "Indicates whether the bridge operates using older
-+ 3 bit length negotiation fields or the newer 6 bit
-+ length field in its RIF."
-+ ::= { dot1dSr 2 }
-+
-+-- The Port-Pair Database
-+
-+-- Implementation of this group is optional.
-+
-+-- This group is implemented by those bridges that support
-+-- the direct multiport model of the source route bridging
-+-- mode as defined in the IEEE 802.5 SRT Addendum to
-+-- 802.1d.
-+
-+-- Bridges implementing this group may report 65535 for
-+-- dot1dSrPortBridgeNumber and dot1dSrPortTargetSegment,
-+-- indicating that those objects are not applicable.
-+
-+dot1dPortPairTableSize OBJECT-TYPE
-+ SYNTAX Gauge
-+ ACCESS read-only
-+ STATUS mandatory
-+ DESCRIPTION
-+ "The total number of entries in the Bridge Port
-+ Pair Database."
-+ ::= { dot1dPortPair 1 }
-+
-+-- the Bridge Port-Pair table
-+
-+-- this table represents port pairs within a bridge forming
-+-- a unique bridge path, as defined in the IEEE 802.5M SRT
-+-- Addendum.
-+
-+dot1dPortPairTable OBJECT-TYPE
-+ SYNTAX SEQUENCE OF Dot1dPortPairEntry
-+ ACCESS not-accessible
-+ STATUS mandatory
-+ DESCRIPTION
-+ "A table that contains information about every
-+
-+ port pair database entity associated with this
-+ source routing bridge."
-+ ::= { dot1dPortPair 2 }
-+
-+dot1dPortPairEntry OBJECT-TYPE
-+ SYNTAX Dot1dPortPairEntry
-+ ACCESS not-accessible
-+ STATUS mandatory
-+ DESCRIPTION
-+ "A list of information for each port pair entity
-+ of a bridge."
-+ INDEX { dot1dPortPairLowPort, dot1dPortPairHighPort }
-+ ::= { dot1dPortPairTable 1 }
-+
-+Dot1dPortPairEntry ::=
-+ SEQUENCE {
-+ dot1dPortPairLowPort
-+ INTEGER,
-+ dot1dPortPairHighPort
-+ INTEGER,
-+ dot1dPortPairBridgeNum
-+ INTEGER,
-+ dot1dPortPairBridgeState
-+ INTEGER
-+ }
-+
-+dot1dPortPairLowPort OBJECT-TYPE
-+ SYNTAX INTEGER (1..65535)
-+ ACCESS read-write
-+ STATUS mandatory
-+ DESCRIPTION
-+ "The port number of the lower numbered port for
-+ which this entry contains port pair database
-+ information."
-+ ::= { dot1dPortPairEntry 1 }
-+
-+dot1dPortPairHighPort OBJECT-TYPE
-+ SYNTAX INTEGER (1..65535)
-+ ACCESS read-write
-+ STATUS mandatory
-+ DESCRIPTION
-+ "The port number of the higher numbered port for
-+ which this entry contains port pair database
-+ information."
-+ ::= { dot1dPortPairEntry 2 }
-+
-+dot1dPortPairBridgeNum OBJECT-TYPE
-+ SYNTAX INTEGER
-+
-+ ACCESS read-write
-+ STATUS mandatory
-+ DESCRIPTION
-+ "A bridge number that uniquely identifies the path
-+ provided by this source routing bridge between the
-+ segments connected to dot1dPortPairLowPort and
-+ dot1dPortPairHighPort. The purpose of bridge
-+ number is to disambiguate between multiple paths
-+ connecting the same two LANs."
-+ ::= { dot1dPortPairEntry 3 }
-+
-+dot1dPortPairBridgeState OBJECT-TYPE
-+ SYNTAX INTEGER {
-+ enabled(1),
-+ disabled(2),
-+ invalid(3)
-+ }
-+ ACCESS read-write
-+ STATUS mandatory
-+ DESCRIPTION
-+ "The state of dot1dPortPairBridgeNum. Writing
-+ 'invalid(3)' to this object removes the
-+ corresponding entry."
-+ ::= { dot1dPortPairEntry 4 }
-+
-+END
Added: trunk/debian/patches/58_download_mibs.README
===================================================================
--- trunk/debian/patches/58_download_mibs.README (rev 0)
+++ trunk/debian/patches/58_download_mibs.README 2009-11-06 18:11:10 UTC (rev 295)
@@ -0,0 +1 @@
+Patch to enable MIB file download during or after installation
Added: trunk/debian/patches/58_download_mibs.patch
===================================================================
--- trunk/debian/patches/58_download_mibs.patch (rev 0)
+++ trunk/debian/patches/58_download_mibs.patch 2009-11-06 18:11:10 UTC (rev 295)
@@ -0,0 +1,628 @@
+Index: net-snmp-5.4.2.1/mibs/Makefile.mib
+===================================================================
+--- net-snmp-5.4.2.1.orig/mibs/Makefile.mib 2009-11-06 18:25:24.000000000 +0100
++++ net-snmp-5.4.2.1/mibs/Makefile.mib 2009-11-06 18:27:03.000000000 +0100
+@@ -1,182 +1,45 @@
+-# RFCHOST = ftp://ftp.nordu.net
+ RFCHOST = ftp://ftp.ietf.org
+ RFCDIR = rfc
+
+ IANAHOST = http://www.iana.org
+ IANADIR = assignments
+
+-PREFIX = /usr/local
+-ALLDIR = $(PREFIX)/share/snmp/rfc.orig
+-INSTDIR = $(PREFIX)/share/snmp/rfc
+-
+-MIBS = SNMPv2-TC.txt SNMPv2-TM.txt SNMPv2-SMI.txt SNMPv2-MIB.txt \
+- SNMPv2-CONF.txt HCNUM-TC.txt INET-ADDRESS-MIB.txt \
+- SNMP-FRAMEWORK-MIB.txt SNMP-MPD-MIB.txt SNMP-USER-BASED-SM-MIB.txt \
+- SNMP-VIEW-BASED-ACM-MIB.txt SNMP-COMMUNITY-MIB.txt \
+- SNMP-TARGET-MIB.txt SNMP-NOTIFICATION-MIB.txt SNMP-PROXY-MIB.txt \
+- AGENTX-MIB.txt SMUX-MIB.txt \
+- DISMAN-SCRIPT-MIB.txt DISMAN-SCHEDULE-MIB.txt \
+- IANA-LANGUAGE-MIB.txt IANA-ADDRESS-FAMILY-NUMBERS-MIB.txt \
+- IF-MIB.txt IF-INVERTED-STACK-MIB.txt \
+- IP-MIB.txt IP-FORWARD-MIB.txt TCP-MIB.txt UDP-MIB.txt \
+- IANAifType-MIB.txt EtherLike-MIB.txt \
+- IPV6-TC.txt IPV6-MIB.txt IPV6-ICMP-MIB.txt \
+- IPV6-TCP-MIB.txt IPV6-UDP-MIB.txt \
+- HOST-RESOURCES-MIB.txt HOST-RESOURCES-TYPES.txt \
+- NETWORK-SERVICES-MIB.txt MTA-MIB.txt \
+- RMON-MIB.txt \
+- RFC1155-SMI.txt RFC1213-MIB.txt \
+- SCTP-MIB.txt
++PREFIX = /usr
++INSTDIR = $(PREFIX)/share/mibs
++RFCTMP = $(INSTDIR)/ietf.orig
++IANATMP = $(INSTDIR)/iana.orig
+
+-MIBDEPS = Makefile.mib mibfetch smistrip
+-
+-all: $(MIBS)
++all: rfc
+
+ allmibs: ianamibs rfcmibs
+
+ rfc: allmibs
+- rm -fr $(INSTDIR)
+- mkdir $(INSTDIR)
+- cp $(ALLDIR)/* $(INSTDIR)
+- if test `uname` = SunOS ; \
+- then gpatch -d $(INSTDIR) < rfcmibs.diff; \
+- else patch -d $(INSTDIR) < rfcmibs.diff; \
+- fi
+- rm -f $(INSTDIR)/*orig
+-
+-clean:
+- rm $(MIBS)
+-
+-SNMP-FRAMEWORK-MIB.txt: $(MIBDEPS)
+- ./mibfetch $(RFCHOST) $(RFCDIR) 3411
+-
+-SNMP-MPD-MIB.txt: $(MIBDEPS)
+- ./mibfetch $(RFCHOST) $(RFCDIR) 3412 SNMP-MPD-MIB
+-
+-SNMP-TARGET-MIB.txt SNMP-NOTIFICATION-MIB.txt SNMP-PROXY-MIB.txt: $(MIBDEPS)
+- ./mibfetch $(RFCHOST) $(RFCDIR) 3413
+-
+-SNMP-USER-BASED-SM-MIB.txt: $(MIBDEPS)
+- ./mibfetch $(RFCHOST) $(RFCDIR) 3414 SNMP-USER-BASED-SM-MIB
+-
+-SNMP-VIEW-BASED-ACM-MIB.txt: $(MIBDEPS)
+- ./mibfetch $(RFCHOST) $(RFCDIR) 3415
+-
+-SNMP-COMMUNITY-MIB.txt: $(MIBDEPS)
+- ./mibfetch $(RFCHOST) $(RFCDIR) 2576
+-
+-SNMPv2-SMI.txt: $(MIBDEPS)
+- ./mibfetch $(RFCHOST) $(RFCDIR) 2578 SNMPv2-SMI
+-
+-SNMPv2-TC.txt: $(MIBDEPS)
+- ./mibfetch $(RFCHOST) $(RFCDIR) 2579
+-
+-SNMPv2-CONF.txt: $(MIBDEPS)
+- ./mibfetch $(RFCHOST) $(RFCDIR) 2580
+-
+-SNMPv2-TM.txt: $(MIBDEPS)
+- ./mibfetch $(RFCHOST) $(RFCDIR) 3417
+-
+-SNMPv2-MIB.txt: $(MIBDEPS)
+- ./mibfetch $(RFCHOST) $(RFCDIR) 3418
+-
+-AGENTX-MIB.txt: $(MIBDEPS)
+- ./mibfetch $(RFCHOST) $(RFCDIR) 2742
+-
+-SMUX-MIB.txt: $(MIBDEPS)
+- ./mibfetch $(RFCHOST) $(RFCDIR) 1227 SMUX-MIB
+-
+-DISMAN-SCHEDULE-MIB.txt: $(MIBDEPS)
+- ./mibfetch $(RFCHOST) $(RFCDIR) 3231
+-
+-DISMAN-SCRIPT-MIB.txt: $(MIBDEPS)
+- ./mibfetch $(RFCHOST) $(RFCDIR) 3165
+-
+-IF-MIB.txt: $(MIBDEPS)
+- ./mibfetch $(RFCHOST) $(RFCDIR) 2863
+-
+-IF-INVERTED-STACK-MIB.txt: $(MIBDEPS)
+- ./mibfetch $(RFCHOST) $(RFCDIR) 2864
+-
+-HCNUM-TC.txt: $(MIBDEPS)
+- ./mibfetch $(RFCHOST) $(RFCDIR) 2856
+-
+-INET-ADDRESS-MIB.txt: $(MIBDEPS)
+- ./mibfetch $(RFCHOST) $(RFCDIR) 4001
+-
+-EtherLike-MIB.txt: $(MIBDEPS)
+- ./mibfetch $(RFCHOST) $(RFCDIR) 3635
+-
+-IANAifType-MIB.txt: $(MIBDEPS)
+- ./mibfetch -x $(IANAHOST) $(IANADIR) ianaiftype-mib
+-
+-IANA-LANGUAGE-MIB.txt: $(MIBDEPS)
+- ./mibfetch -x $(IANAHOST) $(IANADIR) ianalanguage-mib
+-
+-IANA-ADDRESS-FAMILY-NUMBERS-MIB.txt: $(MIBDEPS)
+- ./mibfetch -x $(IANAHOST) $(IANADIR) ianaaddressfamilynumbers-mib
+-
+-IP-MIB.txt: $(MIBDEPS)
+- ./mibfetch $(RFCHOST) $(RFCDIR) 2011
+-
+-IP-FORWARD-MIB.txt: $(MIBDEPS)
+- ./mibfetch $(RFCHOST) $(RFCDIR) 2096
+-
+-TCP-MIB.txt: $(MIBDEPS)
+- ./mibfetch $(RFCHOST) $(RFCDIR) 4022
+-
+-UDP-MIB.txt: $(MIBDEPS)
+- ./mibfetch $(RFCHOST) $(RFCDIR) 2013
+-
+-IPV6-TC.txt IPV6-MIB.txt: $(MIBDEPS)
+- ./mibfetch $(RFCHOST) $(RFCDIR) 2465
+-
+-IPV6-ICMP-MIB.txt: $(MIBDEPS)
+- ./mibfetch $(RFCHOST) $(RFCDIR) 2466
+-
+-IPV6-TCP-MIB.txt: $(MIBDEPS)
+- ./mibfetch $(RFCHOST) $(RFCDIR) 2452
+-
+-IPV6-UDP-MIB.txt: $(MIBDEPS)
+- ./mibfetch $(RFCHOST) $(RFCDIR) 2454
+-
+-HOST-RESOURCES-MIB.txt HOST-RESOURCES-TYPES.txt: $(MIBDEPS)
+- ./mibfetch $(RFCHOST) $(RFCDIR) 2790
+-
+-RMON-MIB.txt: $(MIBDEPS)
+- ./mibfetch $(RFCHOST) $(RFCDIR) 2819
+-
+-NETWORK-SERVICES-MIB.txt: $(MIBDEPS)
+- ./mibfetch $(RFCHOST) $(RFCDIR) 2788
+-
+-MTA-MIB.txt: $(MIBDEPS)
+- ./mibfetch $(RFCHOST) $(RFCDIR) 2789
+-
+-RFC1155-SMI.txt: $(MIBDEPS)
+- ./mibfetch $(RFCHOST) $(RFCDIR) 1155
+-
+-RFC1213-MIB.txt: $(MIBDEPS)
+- ./mibfetch $(RFCHOST) $(RFCDIR) 1213
+-
+-SCTP.txt: $(MIBDEPS)
+- ./mibfetch $(RFCHOST) $(RFCDIR) 3873
++ patch -d $(RFCTMP) < rfcmibs.diff; \
++ rm -f $(RFCTMP)/*orig
++ rm -fr $(INSTDIR)/iana
++ rm -fr $(INSTDIR)/ietf
++ mkdir $(INSTDIR)/iana
++ mkdir $(INSTDIR)/ietf
++ cp $(IANATMP)/* $(INSTDIR)/iana
++ cp $(RFCTMP)/* $(INSTDIR)/ietf
++ rm -fr *orig
+
+ ianamibs: ianalist
+- [ -d $(ALLDIR) ] || mkdir $(ALLDIR)
++ [ -d $(IANATMP) ] || mkdir $(IANATMP)
+ cat ianalist | while read file mibs; \
+ do \
+ if [ "$$file" != "#" ]; \
+ then \
+- ./mibfetch -d $(ALLDIR) -x $(IANAHOST) $(IANADIR) $$file $$mibs; \
++ ./mibfetch -d $(IANATMP) -x $(IANAHOST) $(IANADIR) $$file $$mibs; \
+ fi; \
+ done
+
+ rfcmibs: rfclist
+- [ -d $(ALLDIR) ] || mkdir $(ALLDIR)
++ [ -d $(RFCTMP) ] || mkdir $(RFCTMP)
+ cat rfclist | while read rfc mibs; \
+ do \
+ if [ "$$rfc" != "#" ]; \
+ then \
+- ./mibfetch -d $(ALLDIR) $(RFCHOST) $(RFCDIR) $$rfc $$mibs; \
++ ./mibfetch -d $(RFCTMP) $(RFCHOST) $(RFCDIR) $$rfc $$mibs; \
+ fi; \
+ done
+Index: net-snmp-5.4.2.1/mibs/mibfetch
+===================================================================
+--- net-snmp-5.4.2.1.orig/mibs/mibfetch 2009-11-06 18:25:23.000000000 +0100
++++ net-snmp-5.4.2.1/mibs/mibfetch 2009-11-06 18:26:07.000000000 +0100
+@@ -48,4 +48,4 @@
+ # ncftpget -FV ftp://$host/$dir/$file
+ wget -O - -q -nv $host/$dir/$file | \
+ tr -d \\r | \
+- ./smistrip $verbose -x .txt $mdir $mibs -
++ ./smistrip $verbose $mdir $mibs -
+Index: net-snmp-5.4.2.1/mibs/rfcmibs.diff
+===================================================================
+--- net-snmp-5.4.2.1.orig/mibs/rfcmibs.diff 2009-11-06 18:25:23.000000000 +0100
++++ net-snmp-5.4.2.1/mibs/rfcmibs.diff 2009-11-06 18:26:07.000000000 +0100
+@@ -1,7 +1,6 @@
+-Only in /usr/local/share/snmp/rfc: .index
+-diff -ru /usr/local/share/snmp/rfc.orig/ADSL-LINE-MIB.txt /usr/local/share/snmp/rfc/ADSL-LINE-MIB.txt
+---- /usr/local/share/snmp/rfc.orig/ADSL-LINE-MIB.txt Sat Mar 3 17:27:00 2001
+-+++ /usr/local/share/snmp/rfc/ADSL-LINE-MIB.txt Tue Jan 23 00:42:41 2001
++diff -ru /usr/local/share/snmp/rfc.orig/ADSL-LINE-MIB /usr/local/share/snmp/rfc/ADSL-LINE-MIB
++--- /usr/local/share/snmp/rfc.orig/ADSL-LINE-MIB Sat Mar 3 17:27:00 2001
+++++ /usr/local/share/snmp/rfc/ADSL-LINE-MIB Tue Jan 23 00:42:41 2001
+ @@ -3379,7 +3379,6 @@
+ static profiles are implemented."
+
+@@ -10,9 +9,9 @@
+ MIN-ACCESS read-write
+ DESCRIPTION
+ "Read-write access is applicable when
+-diff -ru /usr/local/share/snmp/rfc.orig/DLSW-MIB.txt /usr/local/share/snmp/rfc/DLSW-MIB.txt
+---- /usr/local/share/snmp/rfc.orig/DLSW-MIB.txt Sat Mar 3 17:18:28 2001
+-+++ /usr/local/share/snmp/rfc/DLSW-MIB.txt Tue Jan 23 00:13:40 2001
++diff -ru /usr/local/share/snmp/rfc.orig/DLSW-MIB /usr/local/share/snmp/rfc/DLSW-MIB
++--- /usr/local/share/snmp/rfc.orig/DLSW-MIB Sat Mar 3 17:18:28 2001
+++++ /usr/local/share/snmp/rfc/DLSW-MIB Tue Jan 23 00:13:40 2001
+ @@ -7,7 +7,7 @@
+
+ Counter32, Gauge32, TimeTicks,
+@@ -286,9 +285,9 @@
+
+ -- ...................................................................
+ -- Node Conformance Group
+-diff -ru /usr/local/share/snmp/rfc.orig/DSA-MIB.txt /usr/local/share/snmp/rfc/DSA-MIB.txt
+---- /usr/local/share/snmp/rfc.orig/DSA-MIB.txt Sat Mar 3 17:15:36 2001
+-+++ /usr/local/share/snmp/rfc/DSA-MIB.txt Thu Feb 22 00:33:45 2001
++diff -ru /usr/local/share/snmp/rfc.orig/DSA-MIB /usr/local/share/snmp/rfc/DSA-MIB
++--- /usr/local/share/snmp/rfc.orig/DSA-MIB Sat Mar 3 17:15:36 2001
+++++ /usr/local/share/snmp/rfc/DSA-MIB Thu Feb 22 00:33:45 2001
+ @@ -10,7 +10,7 @@
+ mib-2
+ FROM RFC1213-MIB
+@@ -298,9 +297,9 @@
+
+ dsaMIB MODULE-IDENTITY
+ LAST-UPDATED "9311250000Z"
+-diff -ru /usr/local/share/snmp/rfc.orig/FDDI-SMT73-MIB.txt /usr/local/share/snmp/rfc/FDDI-SMT73-MIB.txt
+---- /usr/local/share/snmp/rfc.orig/FDDI-SMT73-MIB.txt Sat Mar 3 17:15:09 2001
+-+++ /usr/local/share/snmp/rfc/FDDI-SMT73-MIB.txt Tue Jan 23 00:11:46 2001
++diff -ru /usr/local/share/snmp/rfc.orig/FDDI-SMT73-MIB /usr/local/share/snmp/rfc/FDDI-SMT73-MIB
++--- /usr/local/share/snmp/rfc.orig/FDDI-SMT73-MIB Sat Mar 3 17:15:09 2001
+++++ /usr/local/share/snmp/rfc/FDDI-SMT73-MIB Tue Jan 23 00:11:46 2001
+ @@ -3,6 +3,8 @@
+ IMPORTS
+ Counter
+@@ -310,9 +309,9 @@
+ OBJECT-TYPE
+ FROM RFC-1212;
+
+-diff -ru /usr/local/share/snmp/rfc.orig/HPR-MIB.txt /usr/local/share/snmp/rfc/HPR-MIB.txt
+---- /usr/local/share/snmp/rfc.orig/HPR-MIB.txt Sat Mar 3 17:19:54 2001
+-+++ /usr/local/share/snmp/rfc/HPR-MIB.txt Tue Jan 23 00:25:54 2001
++diff -ru /usr/local/share/snmp/rfc.orig/HPR-MIB /usr/local/share/snmp/rfc/HPR-MIB
++--- /usr/local/share/snmp/rfc.orig/HPR-MIB Sat Mar 3 17:19:54 2001
+++++ /usr/local/share/snmp/rfc/HPR-MIB Tue Jan 23 00:25:54 2001
+ @@ -18,7 +18,7 @@
+ FROM APPN-MIB;
+
+@@ -322,9 +321,9 @@
+ ORGANIZATION "AIW APPN / HPR MIB SIG"
+ CONTACT-INFO
+ "
+-diff -ru /usr/local/share/snmp/rfc.orig/MIP-MIB.txt /usr/local/share/snmp/rfc/MIP-MIB.txt
+---- /usr/local/share/snmp/rfc.orig/MIP-MIB.txt Sat Mar 3 17:17:42 2001
+-+++ /usr/local/share/snmp/rfc/MIP-MIB.txt Tue Jan 23 00:25:27 2001
++diff -ru /usr/local/share/snmp/rfc.orig/MIP-MIB /usr/local/share/snmp/rfc/MIP-MIB
++--- /usr/local/share/snmp/rfc.orig/MIP-MIB Sat Mar 3 17:17:42 2001
+++++ /usr/local/share/snmp/rfc/MIP-MIB Tue Jan 23 00:25:27 2001
+ @@ -1,7 +1,7 @@
+ MIP-MIB DEFINITIONS ::= BEGIN
+
+@@ -343,9 +342,9 @@
+ NOTIFICATIONS { mipAuthFailure }
+ STATUS current
+ DESCRIPTION
+-diff -ru /usr/local/share/snmp/rfc.orig/Modem-MIB.txt /usr/local/share/snmp/rfc/Modem-MIB.txt
+---- /usr/local/share/snmp/rfc.orig/Modem-MIB.txt Sat Mar 3 17:16:35 2001
+-+++ /usr/local/share/snmp/rfc/Modem-MIB.txt Mon Jan 22 23:53:08 2001
++diff -ru /usr/local/share/snmp/rfc.orig/Modem-MIB /usr/local/share/snmp/rfc/Modem-MIB
++--- /usr/local/share/snmp/rfc.orig/Modem-MIB Sat Mar 3 17:16:35 2001
+++++ /usr/local/share/snmp/rfc/Modem-MIB Mon Jan 22 23:53:08 2001
+ @@ -23,7 +23,7 @@
+ E-mail: waldbusser at cmu.edu"
+ DESCRIPTION
+@@ -355,9 +354,9 @@
+
+ mdmMib OBJECT IDENTIFIER ::= { mib-2 38 }
+
+-diff -ru /usr/local/share/snmp/rfc.orig/PPP-LCP-MIB.txt /usr/local/share/snmp/rfc/PPP-LCP-MIB.txt
+---- /usr/local/share/snmp/rfc.orig/PPP-LCP-MIB.txt Sat Mar 3 17:14:46 2001
+-+++ /usr/local/share/snmp/rfc/PPP-LCP-MIB.txt Sat Mar 3 23:13:27 2001
++diff -ru /usr/local/share/snmp/rfc.orig/PPP-LCP-MIB /usr/local/share/snmp/rfc/PPP-LCP-MIB
++--- /usr/local/share/snmp/rfc.orig/PPP-LCP-MIB Sat Mar 3 17:14:46 2001
+++++ /usr/local/share/snmp/rfc/PPP-LCP-MIB Sat Mar 3 23:13:27 2001
+ @@ -182,7 +182,7 @@
+ ::= { pppLinkStatusEntry 5 }
+
+@@ -394,9 +393,9 @@
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+-diff -ru /usr/local/share/snmp/rfc.orig/RDBMS-MIB.txt /usr/local/share/snmp/rfc/RDBMS-MIB.txt
+---- /usr/local/share/snmp/rfc.orig/RDBMS-MIB.txt Sat Mar 3 17:16:41 2001
+-+++ /usr/local/share/snmp/rfc/RDBMS-MIB.txt Tue Jan 23 00:24:04 2001
++diff -ru /usr/local/share/snmp/rfc.orig/RDBMS-MIB /usr/local/share/snmp/rfc/RDBMS-MIB
++--- /usr/local/share/snmp/rfc.orig/RDBMS-MIB Sat Mar 3 17:16:41 2001
+++++ /usr/local/share/snmp/rfc/RDBMS-MIB Tue Jan 23 00:24:04 2001
+ @@ -6,8 +6,8 @@
+ FROM SNMPv2-SMI
+ DisplayString, DateAndTime, AutonomousType
+@@ -419,10 +418,10 @@
+ MODULE RDBMS-MIB
+ MANDATORY-GROUPS { rdbmsGroup }
+
+-Only in /usr/local/share/snmp/rfc: RFC-1215.txt
+-diff -ru /usr/local/share/snmp/rfc.orig/RFC1414-MIB.txt /usr/local/share/snmp/rfc/RFC1414-MIB.txt
+---- /usr/local/share/snmp/rfc.orig/RFC1414-MIB.txt Sat Mar 3 17:14:37 2001
+-+++ /usr/local/share/snmp/rfc/RFC1414-MIB.txt Tue Feb 20 00:25:21 2001
++Only in /usr/local/share/snmp/rfc: RFC-1215
++diff -ru /usr/local/share/snmp/rfc.orig/RFC1414-MIB /usr/local/share/snmp/rfc/RFC1414-MIB
++--- /usr/local/share/snmp/rfc.orig/RFC1414-MIB Sat Mar 3 17:14:37 2001
+++++ /usr/local/share/snmp/rfc/RFC1414-MIB Tue Feb 20 00:25:21 2001
+ @@ -3,6 +3,7 @@
+ IMPORTS
+ OBJECT-TYPE
+@@ -431,9 +430,9 @@
+ tcpConnLocalAddress, tcpConnLocalPort,
+ tcpConnRemAddress, tcpConnRemPort
+ FROM RFC1213-MIB;
+-diff -ru /usr/local/share/snmp/rfc.orig/SNA-NAU-MIB.txt /usr/local/share/snmp/rfc/SNA-NAU-MIB.txt
+---- /usr/local/share/snmp/rfc.orig/SNA-NAU-MIB.txt Sat Mar 3 17:16:24 2001
+-+++ /usr/local/share/snmp/rfc/SNA-NAU-MIB.txt Mon Jan 22 23:57:44 2001
++diff -ru /usr/local/share/snmp/rfc.orig/SNA-NAU-MIB /usr/local/share/snmp/rfc/SNA-NAU-MIB
++--- /usr/local/share/snmp/rfc.orig/SNA-NAU-MIB Sat Mar 3 17:16:24 2001
+++++ /usr/local/share/snmp/rfc/SNA-NAU-MIB Mon Jan 22 23:57:44 2001
+ @@ -17,7 +17,7 @@
+ DisplayString, RowStatus, TimeStamp, InstancePointer
+ FROM SNMPv2-TC
+@@ -443,9 +442,9 @@
+ OBJECT-TYPE, MODULE-IDENTITY, NOTIFICATION-TYPE
+ FROM SNMPv2-SMI
+
+-diff -ru /usr/local/share/snmp/rfc.orig/TCPIPX-MIB.txt /usr/local/share/snmp/rfc/TCPIPX-MIB.txt
+---- /usr/local/share/snmp/rfc.orig/TCPIPX-MIB.txt Sat Mar 3 17:17:17 2001
+-+++ /usr/local/share/snmp/rfc/TCPIPX-MIB.txt Sat Mar 3 16:51:11 2001
++diff -ru /usr/local/share/snmp/rfc.orig/TCPIPX-MIB /usr/local/share/snmp/rfc/TCPIPX-MIB
++--- /usr/local/share/snmp/rfc.orig/TCPIPX-MIB Sat Mar 3 17:17:17 2001
+++++ /usr/local/share/snmp/rfc/TCPIPX-MIB Sat Mar 3 16:51:11 2001
+ @@ -1,6 +1,8 @@
+ TCPIPX-MIB DEFINITIONS ::= BEGIN
+
+@@ -464,9 +463,9 @@
+
+ -- TCP/IPX MIB object idenfifiers
+
+-diff -ru /usr/local/share/snmp/rfc.orig/UPS-MIB.txt /usr/local/share/snmp/rfc/UPS-MIB.txt
+---- /usr/local/share/snmp/rfc.orig/UPS-MIB.txt Sat Mar 3 17:16:01 2001
+-+++ /usr/local/share/snmp/rfc/UPS-MIB.txt Mon Jan 22 23:55:45 2001
++diff -ru /usr/local/share/snmp/rfc.orig/UPS-MIB /usr/local/share/snmp/rfc/UPS-MIB
++--- /usr/local/share/snmp/rfc.orig/UPS-MIB Sat Mar 3 17:16:01 2001
+++++ /usr/local/share/snmp/rfc/UPS-MIB Mon Jan 22 23:55:45 2001
+ @@ -2,7 +2,7 @@
+
+ IMPORTS
+@@ -476,9 +475,9 @@
+ FROM SNMPv2-SMI
+ DisplayString, TimeStamp, TimeInterval, TestAndIncr,
+ AutonomousType
+-diff -ru /usr/local/share/snmp/rfc.orig/SMUX-MIB.txt /usr/local/share/snmp/rfc/SMUX-MIB.txt
+---- /usr/local/share/snmp/rfc.orig/SMUX-MIB.txt 2002-06-15 15:31:22.000000000 +0200
+-+++ /usr/local/share/snmp/rfc/SMUX-MIB.txt 2002-06-15 15:31:22.000000000 +0200
++diff -ru /usr/local/share/snmp/rfc.orig/SMUX-MIB /usr/local/share/snmp/rfc/SMUX-MIB
++--- /usr/local/share/snmp/rfc.orig/SMUX-MIB 2002-06-15 15:31:22.000000000 +0200
+++++ /usr/local/share/snmp/rfc/SMUX-MIB 2002-06-15 15:31:22.000000000 +0200
+ @@ -3,6 +3,8 @@
+ IMPORTS
+ enterprises
+Index: net-snmp-5.4.2.1/mibs/rfclist
+===================================================================
+--- net-snmp-5.4.2.1.orig/mibs/rfclist 2009-11-06 18:25:23.000000000 +0100
++++ net-snmp-5.4.2.1/mibs/rfclist 2009-11-06 18:26:07.000000000 +0100
+@@ -1,4 +1,4 @@
+-# updated 2005-03-14
++# updated 2007-10-15
+ 1155 RFC1155-SMI
+ 1213 RFC1213-MIB
+ 1227 SMUX-MIB
+@@ -6,6 +6,8 @@
+ 1381 RFC1381-MIB
+ 1382 RFC1382-MIB
+ 1414 RFC1414-MIB
++1447 SNMPv2-PARTY-MIB
++1451 SNMPv2-M2M-MIB
+ 1461 MIOX25-MIB
+ 1471 PPP-LCP-MIB
+ 1472 PPP-SEC-MIB
+@@ -16,10 +18,11 @@
+ 1525 SOURCE-ROUTING-MIB
+ 1559 DECNET-PHIV-MIB
+ 1567 DSA-MIB
++1592 DPI20-MIB
++1593 IBM-6611-APPN-MIB
+ 1611 DNS-SERVER-MIB
+ 1612 DNS-RESOLVER-MIB
+ 1628 UPS-MIB
+-1657 BGP4-MIB
+ 1658 CHARACTER-MIB
+ 1659 RS-232-MIB
+ 1660 PARALLEL-MIB
+@@ -33,10 +36,9 @@
+ 1748 TOKENRING-MIB
+ 1749 TOKENRING-STATION-SR-MIB
+ 1792 TCPIPX-MIB
+-1850 OSPF-MIB:OSPF-TRAP-MIB
++1910 SNMPv2-USEC-MIB
+ 2006 MIP-MIB
+ 2020 DOT12-IF-MIB
+-2021 RMON2-MIB
+ 2024 DLSW-MIB
+ 2051 APPC-MIB
+ 2108 SNMP-REPEATER-MIB
+@@ -51,17 +53,15 @@
+ 2266 DOT12-RPTR-MIB
+ 2287 SYSAPPL-MIB
+ 2320 IPOA-MIB
+-2366 IPATM-IPMC-MIB
++2417 IPATM-IPMC-MIB
+ 2452 IPV6-TCP-MIB
+ 2454 IPV6-UDP-MIB
+ 2455 APPN-MIB
+ 2456 APPN-TRAP-MIB
+ 2457 EBN-MIB
+-2465 IPV6-TC:IPV6-MIB
++2465 IPV6-MIB:IPV6-TC
+ 2466 IPV6-ICMP-MIB
+ 2494 DS0-MIB:DS0BUNDLE-MIB
+-2495 DS1-MIB
+-2496 DS3-MIB
+ 2512 ATM-ACCOUNTING-INFORMATION-MIB
+ 2513 ACCOUNTING-CONTROL-MIB
+ 2514 ATM-TC-MIB
+@@ -69,7 +69,6 @@
+ 2561 TN3270E-MIB
+ 2562 TN3270E-RT-MIB
+ 2564 APPLICATION-MIB
+-2576 SNMP-COMMUNITY-MIB
+ 2578 SNMPv2-SMI
+ 2579 SNMPv2-TC
+ 2580 SNMPv2-CONF
+@@ -77,15 +76,8 @@
+ 2594 WWW-MIB
+ 2605 DIRECTORY-SERVER-MIB
+ 2613 SMON-MIB
+-2618 RADIUS-AUTH-CLIENT-MIB
+-2619 RADIUS-AUTH-SERVER-MIB
+-2620 RADIUS-ACC-CLIENT-MIB
+-2621 RADIUS-ACC-SERVER-MIB
+-2662 ADSL-TC-MIB:ADSL-LINE-MIB
++2662 ADSL-LINE-MIB:ADSL-TC-MIB
+ 2666 ETHER-CHIPSET-MIB
+-2669 DOCS-CABLE-DEVICE-MIB
+-2670 DOCS-IF-MIB
+-2674 P-BRIDGE-MIB:Q-BRIDGE-MIB
+ 2677 NHRP-MIB
+ 2707 Job-Monitoring-MIB
+ 2720 FLOW-METER-MIB
+@@ -102,7 +94,6 @@
+ 2863 IF-MIB
+ 2864 IF-INVERTED-STACK-MIB
+ 2922 PTOPO-MIB
+-2925 DISMAN-PING-MIB:DISMAN-TRACEROUTE-MIB:DISMAN-NSLOOKUP-MIB
+ 2932 IPMROUTE-STD-MIB
+ 2933 IGMP-STD-MIB
+ 2934 PIM-MIB
+@@ -119,19 +110,21 @@
+ 3083 DOCS-BPI-MIB
+ 3144 INTERFACETOPN-MIB
+ 3165 DISMAN-SCRIPT-MIB
++3176 SFLOW-MIB
+ 3201 CIRCUIT-IF-MIB
+ 3202 FRSLD-MIB
+ 3231 DISMAN-SCHEDULE-MIB
+ 3273 HC-RMON-MIB
+-3276 HDSL2-SHDSL-LINE-MIB
++3287 DSMON-MIB
+ 3289 DIFFSERV-DSCP-TC:DIFFSERV-MIB
+ 3295 GSMP-MIB
+-3371 L2TP-MIB
++3371 L2TP-MIB
+ 3411 SNMP-FRAMEWORK-MIB
+ 3412 SNMP-MPD-MIB
+-3413 SNMP-TARGET-MIB:SNMP-NOTIFICATION-MIB:SNMP-PROXY-MIB
++3413 SNMP-NOTIFICATION-MIB:SNMP-PROXY-MIB:SNMP-TARGET-MIB
+ 3414 SNMP-USER-BASED-SM-MIB
+ 3415 SNMP-VIEW-BASED-ACM-MIB
++3416 SNMPv2-PDU
+ 3417 SNMPv2-TM
+ 3418 SNMPv2-MIB
+ 3419 TRANSPORT-ADDRESS-MIB
+@@ -140,6 +133,7 @@
+ 3440 ADSL-LINE-EXT-MIB
+ 3498 APS-MIB
+ 3559 MALLOC-MIB
++3584 SNMP-COMMUNITY-MIB
+ 3591 OPT-IF-MIB
+ 3592 SONET-MIB
+ 3593 PerfHist-TC-MIB
+@@ -147,25 +141,24 @@
+ 3606 ATM2-MIB
+ 3621 POWER-ETHERNET-MIB
+ 3635 EtherLike-MIB
+-3636 MAU-MIB
+-3637 ETHER-WIS
+ 3705 HC-PerfHist-TC-MIB
+ 3728 VDSL-LINE-MIB
+ 3729 APM-MIB
+ 3747 DIFFSERV-CONFIG-MIB
+ 3805 Printer-MIB
+ 3806 Finisher-MIB
+-# 3808 IANA-CHARSET-MIB
+ 3811 MPLS-TC-STD-MIB
+ 3812 MPLS-TE-STD-MIB
+ 3813 MPLS-LSR-STD-MIB
+ 3814 MPLS-FTN-STD-MIB
+-3815 MPLS-LDP-STD-MIB:MPLS-LDP-ATM-STD-MIB:MPLS-LDP-FRAME-RELAY-STD-MIB:MPLS-LDP-GENERIC-STD-MIB
+-3816 ROHC-MIB:ROHC-UNCOMPRESSED-MIB:ROHC-RTP-MIB
++3815 MPLS-LDP-ATM-STD-MIB:MPLS-LDP-FRAME-RELAY-STD-MIB:MPLS-LDP-GENERIC-STD-MIB:MPLS-LDP-STD-MIB
++3816 ROHC-MIB:ROHC-RTP-MIB:ROHC-UNCOMPRESSED-MIB
+ 3826 SNMP-USM-AES-MIB
++3872 TRIP-MIB:TRIP-TC-MIB
+ 3873 SCTP-MIB
+-3877 ALARM-MIB:ITU-ALARM-TC-MIB:ITU-ALARM-MIB
++3877 ALARM-MIB:ITU-ALARM-MIB:ITU-ALARM-TC-MIB
+ 3878 ARC-MIB
++3896 DS3-MIB
+ 3970 TE-MIB
+ 4001 INET-ADDRESS-MIB
+ 4008 NAT-MIB
+@@ -180,9 +173,64 @@
+ 4131 DOCS-IETF-BPI2-MIB
+ 4133 ENTITY-MIB
+ 4149 SSPM-MIB
++4150 TPM-MIB
+ 4188 BRIDGE-MIB
+ 4220 TE-LINK-STD-MIB
+ 4265 VPN-TC-STD-MIB
+-4268 ENTITY-STATE-TC-MIB:ENTITY-STATE-MIB
++4268 ENTITY-STATE-MIB:ENTITY-STATE-TC-MIB
++4273 BGP4-MIB
+ 4292 IP-FORWARD-MIB
+ 4293 IP-MIB
++4295 MOBILEIPV6-MIB
++4318 RSTP-MIB
++4319 HDSL2-SHDSL-LINE-MIB
++4323 DOCS-IETF-QOS-MIB
++4363 P-BRIDGE-MIB:Q-BRIDGE-MIB
++4368 MPLS-LC-ATM-STD-MIB:MPLS-LC-FR-STD-MIB
++4369 IFCP-MGMT-MIB
++4382 MPLS-L3VPN-STD-MIB
++4404 FCIP-MGMT-MIB
++4438 T11-FC-NAME-SERVER-MIB
++4439 T11-FC-FABRIC-ADDR-MGR-MIB:T11-TC-MIB
++4444 ISIS-MIB
++4455 SCSI-MIB
++4498 AGGREGATE-MIB:TIME-AGGREGATE-MIB
++4502 RMON2-MIB
++4544 ISCSI-MIB
++4545 IPS-AUTH-MIB
++4546 DOCS-IF-MIB
++4547 DOCS-IETF-CABLE-DEVICE-NOTIFICATION-MIB
++4560 DISMAN-NSLOOKUP-MIB:DISMAN-PING-MIB:DISMAN-TRACEROUTE-MIB
++4624 MSDP-MIB
++4625 T11-FC-ROUTE-MIB
++4626 T11-FC-FSPF-MIB
++4631 LMP-MIB
++4639 DOCS-CABLE-DEVICE-MIB
++4668 RADIUS-AUTH-CLIENT-MIB
++4669 RADIUS-AUTH-SERVER-MIB
++4670 RADIUS-ACC-CLIENT-MIB
++4671 RADIUS-ACC-SERVER-MIB
++4672 RADIUS-DYNAUTH-CLIENT-MIB
++4673 RADIUS-DYNAUTH-SERVER-MIB
++4682 PKTC-IETF-MTA-MIB
++4706 ADSL2-LINE-MIB:ADSL2-LINE-TC-MIB
++4711 RAQMON-MIB
++4712 RAQMON-RDS-MIB
++4747 T11-FC-VIRTUAL-FABRIC-MIB
++4750 OSPF-MIB:OSPF-TRAP-MIB
++4780 SIP-COMMON-MIB:SIP-SERVER-MIB:SIP-TC-MIB:SIP-UA-MIB
++4789 SNMP-IEEE802-TM-MIB
++4801 GMPLS-TC-STD-MIB
++4802 GMPLS-TE-STD-MIB
++4803 GMPLS-LABEL-STD-MIB:GMPLS-LSR-STD-MIB
++4805 DS1-MIB
++4807 IPSEC-SPD-MIB
++4836 MAU-MIB
++4837 DOT3-EPON-MIB
++4878 DOT3-OAM-MIB
++4898 TCP-ESTATS-MIB
++4935 T11-FC-FABRIC-CONFIG-SERVER-MIB
++4936 T11-FC-FABRIC-LOCK-MIB:T11-FC-ZONE-SERVER-MIB
++4939 ISNS-MIB
++4983 T11-FC-RSCN-MIB
++5017 URI-TC-MIB
Modified: trunk/debian/patches/series
===================================================================
--- trunk/debian/patches/series 2009-11-06 18:09:35 UTC (rev 294)
+++ trunk/debian/patches/series 2009-11-06 18:11:10 UTC (rev 295)
@@ -6,3 +6,4 @@
08_defaultconfig.patch
25_duplicate_iftable.patch
56_manpage.patch
+58_download_mibs.patch
Modified: trunk/debian/rules
===================================================================
--- trunk/debian/rules 2009-11-06 18:09:35 UTC (rev 294)
+++ trunk/debian/rules 2009-11-06 18:11:10 UTC (rev 295)
@@ -51,6 +51,7 @@
--with-mib-modules="$(MIB_MODULES)" \
--enable-mfd-rewrites \
--with-mnttab=/etc/mtab \
+ --with-mibdirs="\$HOME/.snmp/mibs:/usr/share/mibs/iana:/usr/share/mibs/ietf:/usr/share/mibs/netsnmp" \
--with-defaults
pre-build::
Modified: trunk/debian/snmpd.default
===================================================================
--- trunk/debian/snmpd.default 2009-11-06 18:09:35 UTC (rev 294)
+++ trunk/debian/snmpd.default 2009-11-06 18:11:10 UTC (rev 295)
@@ -2,7 +2,7 @@
# MIB directories. /usr/share/snmp/mibs is the default, but
# including it here avoids some strange problems.
-export MIBDIRS=/usr/share/snmp/mibs
+export MIBDIRS=/usr/share/mibs/iana:/usr/share/mibs/ietf:/usr/share/mibs/netsnmp
# snmpd control (yes means start daemon).
SNMPDRUN=yes
Modified: trunk/debian/snmpd.init
===================================================================
--- trunk/debian/snmpd.init 2009-11-06 18:09:35 UTC (rev 294)
+++ trunk/debian/snmpd.init 2009-11-06 18:11:10 UTC (rev 295)
@@ -21,7 +21,7 @@
test -x /usr/sbin/snmptrapd || exit 0
# Defaults
-export MIBDIRS=/usr/share/snmp/mibs
+export MIBDIRS=/usr/share/mibs/iana:/usr/share/mibs/ietf:/usr/share/mibs/netsnmp
SNMPDRUN=yes
SNMPDOPTS='-Lsd -Lf /dev/null -p /var/run/snmpd.pid'
TRAPDRUN=no
More information about the Pkg-net-snmp-commits
mailing list