[Pkg-pulseaudio-devel] Bug#544237: pulseaudio: Muted after boot
Sven Arvidsson
sa at whiz.se
Sat Aug 29 22:26:58 UTC 2009
Package: pulseaudio
Version: 0.9.16~test5-1
Severity: normal
At almost every boot PulseAudio starts with the volume muted. The only
time this does not happen seems to be when I don't do a clean log out
(hit the reset button).
This is basically bug 525572 again, but as that problem seems to have
been solved for at least some people I'm filing it as a new bug.
Removing ~/.pulse and rebooting does not make any difference.
I'm attaching a verbose log of PA starting in a muted state.
There's boot an upstream bug:
http://www.pulseaudio.org/ticket/572
and a bug report for Ubuntu:
https://bugs.launchpad.net/ubuntu/+source/pulseaudio/+bug/352732
-- System Information:
Debian Release: squeeze/sid
APT prefers unstable
APT policy: (500, 'unstable'), (1, 'experimental')
Architecture: i386 (i686)
Kernel: Linux 2.6.31-rc8-custom (SMP w/2 CPU cores)
Locale: LANG=en_GB.UTF-8, LC_CTYPE=en_GB.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages pulseaudio depends on:
ii adduser 3.110 add and remove users and groups
ii consolekit 0.3.0-3 framework for defining and trackin
ii libasound2 1.0.20-3 shared library for ALSA applicatio
ii libasyncns0 0.3-1 Asyncronous name service query lib
ii libc6 2.9-25 GNU C Library: Shared libraries
ii libcap2 1:2.16-5 support for getting/setting POSIX.
ii libdbus-1-3 1.2.16-2 simple interprocess messaging syst
ii libflac8 1.2.1-2+b1 Free Lossless Audio Codec - runtim
ii libgdbm3 1.8.3-6+b1 GNU dbm database routines (runtime
ii libhal1 0.5.13-3 Hardware Abstraction Layer - share
ii libice6 2:1.0.5-1 X11 Inter-Client Exchange library
ii libltdl7 2.2.6a-4 A system independent dlopen wrappe
ii libogg0 1.1.4~dfsg-1 Ogg bitstream library
ii liboil0.3 0.3.16-1 Library of Optimized Inner Loops
ii libpulse0 0.9.16~test5-1 PulseAudio client libraries
ii libsamplerate0 0.1.7-2 audio rate conversion library
ii libsm6 2:1.1.1-1 X11 Session Management library
ii libsndfile1 1.0.20-1+b1 Library for reading/writing audio
ii libspeexdsp1 1.2~rc1-1 The Speex extended runtime library
ii libvorbis0a 1.2.0.dfsg-6 The Vorbis General Audio Compressi
ii libvorbisenc2 1.2.0.dfsg-6 The Vorbis General Audio Compressi
ii libwrap0 7.6.q-18 Wietse Venema's TCP wrappers libra
ii libx11-6 2:1.2.99.901-1 X11 client-side library
ii libxtst6 2:1.0.3-1 X11 Testing -- Resource extension
ii lsb-base 3.2-23 Linux Standard Base 3.2 init scrip
Versions of packages pulseaudio recommends:
ii gstreamer0.10-pulseaudio 0.10.15.5-1 GStreamer plugin for PulseAudio
ii libasound2-plugins 1.0.20-1 ALSA library additional plugins
ii pulseaudio-esound-compat 0.9.16~test5-1 PulseAudio ESD compatibility layer
ii pulseaudio-module-hal 0.9.16~test5-1 HAL device detection module for Pu
ii pulseaudio-module-x11 0.9.16~test5-1 X11 module for PulseAudio sound se
Versions of packages pulseaudio suggests:
ii paman 0.9.4-1 PulseAudio Manager
ii paprefs 0.9.8-1 PulseAudio Preferences
pn pavucontrol <none> (no description available)
pn pavumeter <none> (no description available)
ii pulseaudio-utils 0.9.16~test5-1 Command line tools for the PulseAu
-- no debconf information
-------------- next part --------------
I: main.c: setrlimit(RLIMIT_NICE, (31, 31)) failed: Operation not permitted
I: main.c: setrlimit(RLIMIT_RTPRIO, (9, 9)) failed: Operation not permitted
D: core-rtclock.c: Timer slack is set to 50 us.
I: core-util.c: Failed to acquire high-priority scheduling: No such file or directory
I: main.c: This is PulseAudio 0.9.16-test5
D: main.c: Compilation host: i486-pc-linux-gnu
D: main.c: Compilation CFLAGS: -g -O2 -g -Wall -O2 -Wall -W -Wextra -pipe -Wno-long-long -Winline -Wvla -Wno-overlength-strings -Wunsafe-loop-optimizations -Wundef -Wformat=2 -Wlogical-op -Wsign-compare -Wformat-security -Wmissing-include-dirs -Wformat-nonliteral -Wold-style-definition -Wpointer-arith -Winit-self -Wdeclaration-after-statement -Wfloat-equal -Wmissing-prototypes -Wstrict-prototypes -Wredundant-decls -Wmissing-declarations -Wmissing-noreturn -Wshadow -Wendif-labels -Wcast-align -Wstrict-aliasing=2 -Wwrite-strings -Wno-unused-parameter -ffast-math -Wp,-D_FORTIFY_SOURCE=2 -fno-common -fdiagnostics-show-option
D: main.c: Running on host: Linux i686 2.6.31-rc8-custom #1 SMP Sat Aug 29 23:00:24 CEST 2009
D: main.c: Found 2 CPUs.
I: main.c: Page size is 4096 bytes
D: main.c: Compiled with Valgrind support: no
D: main.c: Running in valgrind mode: no
D: main.c: Optimized build: yes
D: main.c: All asserts enabled.
I: main.c: Machine ID is d9e83238c34486d0c586c11b4a1025e1.
I: main.c: Session ID is d9e83238c34486d0c586c11b4a1025e1-1251584353.535630-2133498955.
I: main.c: Using runtime directory /home/sa/.pulse/d9e83238c34486d0c586c11b4a1025e1-runtime.
I: main.c: Using state directory /home/sa/.pulse.
I: main.c: Running in system mode: no
I: main.c: Fresh high-resolution timers available! Bon appetit!
D: memblock.c: Using shared memory pool with 1024 slots of size 64.0 KiB each, total size is 64.0 MiB, maximum usable slot size is 65496
D: database-gdbm.c: Opened GDBM database '/home/sa/.pulse/d9e83238c34486d0c586c11b4a1025e1-device-volumes.i486-pc-linux-gnu.gdbm'
I: module-device-restore.c: Sucessfully opened database file '/home/sa/.pulse/d9e83238c34486d0c586c11b4a1025e1-device-volumes'.
I: module.c: Loaded "module-device-restore" (index: #0; argument: "").
D: database-gdbm.c: Opened GDBM database '/home/sa/.pulse/d9e83238c34486d0c586c11b4a1025e1-stream-volumes.i486-pc-linux-gnu.gdbm'
I: module-stream-restore.c: Sucessfully opened database file '/home/sa/.pulse/d9e83238c34486d0c586c11b4a1025e1-stream-volumes'.
I: module.c: Loaded "module-stream-restore" (index: #1; argument: "").
D: database-gdbm.c: Opened GDBM database '/home/sa/.pulse/d9e83238c34486d0c586c11b4a1025e1-card-database.i486-pc-linux-gnu.gdbm'
I: module-card-restore.c: Sucessfully opened database file '/home/sa/.pulse/d9e83238c34486d0c586c11b4a1025e1-card-database'.
I: module.c: Loaded "module-card-restore" (index: #2; argument: "").
I: module.c: Loaded "module-augment-properties" (index: #3; argument: "").
D: cli-command.c: Checking for existance of '/usr/lib/pulse-0.9.16/modules/module-udev-detect.so': failure
W: module.c: module-detect is deprecated: Please use module-hal-detect instead of module-detect!
D: dbus-util.c: Successfully connected to D-Bus session bus 3c54124dfcff42772c68cb6c4a99a962 as :1.52
D: reserve-wrap.c: Successfully acquired reservation lock on device 'Audio0'
D: reserve-wrap.c: Successfully create reservation lock monitor for device 'Audio0'
D: alsa-util.c: Checking for superset analog-stereo (front:%f)
D: alsa-util.c: Trying front:0 with SND_PCM_NO_AUTO_FORMAT ...
D: alsa-util.c: Managed to open front:0
D: alsa-util.c: Maximum hw buffer size is 371 ms
I: alsa-sink.c: Successfully opened device front:0.
I: alsa-sink.c: Selected mapping 'Analog Stereo' (analog-stereo).
I: alsa-sink.c: Successfully enabled mmap() mode.
I: alsa-sink.c: Successfully enabled timer-based scheduling mode.
I: (alsa-lib)control.c: Invalid CTL front:0
I: alsa-mixer.c: Unable to attach to mixer front:0: No such file or directory
I: alsa-mixer.c: Successfully attached to mixer 'hw:0'
D: alsa-mixer.c: Probing path 'analog-output'
D: alsa-mixer.c: Probing path 'analog-output-headphones'
D: alsa-mixer.c: Probing path 'analog-output-mono'
D: alsa-mixer.c: Probe of element 'Master Mono' failed.
D: alsa-mixer.c: Probing path 'analog-output-lfe-on-mono'
D: alsa-mixer.c: Probe of element 'Master Mono' failed.
D: alsa-sink.c: Probed mixer paths:
D: alsa-mixer.c: Path Set 0x9370910, direction=1, probed=yes
D: alsa-mixer.c: Path analog-output (Analog Output), direction=1, priority=100, probed=yes, supported=yes, has_mute=yes, has_volume=yes, has_dB=yes, min_volume=0, max_volume=31, min_dB=-144, max_dB=0
D: alsa-mixer.c: Element Master, direction=1, switch=1, volume=1, enumeration=0, required=0, required_absent=0, mask=0x7ffffffffffff, n_channels=1, override_map=yes
D: alsa-mixer.c: Element Headphone, direction=1, switch=2, volume=0, enumeration=0, required=0, required_absent=0, mask=0x0, n_channels=0, override_map=no
D: alsa-mixer.c: Element Front, direction=1, switch=1, volume=1, enumeration=0, required=0, required_absent=0, mask=0x6, n_channels=2, override_map=yes
D: alsa-mixer.c: Element Surround, direction=1, switch=1, volume=1, enumeration=0, required=0, required_absent=0, mask=0x60, n_channels=2, override_map=yes
D: alsa-mixer.c: Element Side, direction=1, switch=1, volume=1, enumeration=0, required=0, required_absent=0, mask=0xc00, n_channels=2, override_map=yes
D: alsa-mixer.c: Element Center, direction=1, switch=1, volume=1, enumeration=0, required=0, required_absent=0, mask=0x4900000000018, n_channels=1, override_map=yes
D: alsa-mixer.c: Element LFE, direction=1, switch=1, volume=1, enumeration=0, required=0, required_absent=0, mask=0x80, n_channels=1, override_map=yes
D: alsa-mixer.c: Element PCM, direction=1, switch=0, volume=1, enumeration=0, required=0, required_absent=0, mask=0x3600000000f66, n_channels=2, override_map=yes
D: alsa-mixer.c: Path analog-output-headphones (Analog Headphones), direction=1, priority=90, probed=yes, supported=yes, has_mute=yes, has_volume=yes, has_dB=yes, min_volume=0, max_volume=31, min_dB=-97.5, max_dB=0
D: alsa-mixer.c: Element Master, direction=1, switch=1, volume=1, enumeration=0, required=0, required_absent=0, mask=0x7ffffffffffff, n_channels=1, override_map=yes
D: alsa-mixer.c: Element Headphone, direction=1, switch=1, volume=0, enumeration=0, required=4, required_absent=0, mask=0x0, n_channels=0, override_map=yes
D: alsa-mixer.c: Element Front, direction=1, switch=2, volume=2, enumeration=0, required=0, required_absent=0, mask=0x6, n_channels=2, override_map=no
D: alsa-mixer.c: Element Side, direction=1, switch=2, volume=2, enumeration=0, required=0, required_absent=0, mask=0x6, n_channels=2, override_map=no
D: alsa-mixer.c: Element Center, direction=1, switch=2, volume=2, enumeration=0, required=0, required_absent=0, mask=0x7ffffffffffff, n_channels=1, override_map=no
D: alsa-mixer.c: Element LFE, direction=1, switch=2, volume=2, enumeration=0, required=0, required_absent=0, mask=0x7ffffffffffff, n_channels=1, override_map=no
D: alsa-mixer.c: Element PCM, direction=1, switch=0, volume=1, enumeration=0, required=0, required_absent=0, mask=0x3600000000f66, n_channels=2, override_map=yes
D: dbus-util.c: Successfully connected to D-Bus system bus 8d3e5c152df117d47fd8bb784a99a94a as :1.42
D: alsa-mixer.c: Added 2 ports
I: sink.c: Created sink 0 "alsa_output.0.analog-stereo" with sample spec s16le 2ch 44100Hz and channel map front-left,front-right
I: sink.c: alsa.resolution_bits = "16"
I: sink.c: device.api = "alsa"
I: sink.c: device.class = "sound"
I: sink.c: alsa.class = "generic"
I: sink.c: alsa.subclass = "generic-mix"
I: sink.c: alsa.name = "ALC1200 Analog"
I: sink.c: alsa.id = "ALC1200 Analog"
I: sink.c: alsa.subdevice = "0"
I: sink.c: alsa.subdevice_name = "subdevice #0"
I: sink.c: alsa.device = "0"
I: sink.c: alsa.card = "0"
I: sink.c: alsa.card_name = "HDA Intel"
I: sink.c: alsa.long_card_name = "HDA Intel at 0xfe8f4000 irq 22"
I: sink.c: alsa.driver_name = "snd_hda_intel"
I: sink.c: hal.udi = "/org/freedesktop/Hal/devices/pci_8086_3a3e_sound_card_0"
I: sink.c: hal.product = "HDA Intel Sound Card"
I: sink.c: hal.card_id = "HDA Intel"
I: sink.c: device.string = "front:0"
I: sink.c: device.buffering.buffer_size = "65536"
I: sink.c: device.buffering.fragment_size = "32768"
I: sink.c: device.access_mode = "mmap+timer"
I: sink.c: device.profile.name = "analog-stereo"
I: sink.c: device.profile.description = "Analog Stereo"
I: sink.c: device.description = "HDA Intel Analog Stereo"
I: sink.c: alsa.mixer_name = "Intel G45 DEVELK"
I: sink.c: alsa.components = "HDA:10ec0888,104382fe,00100101 HDA:80862803,80860101,00100000"
I: sink.c: device.icon_name = "audio-card-analog"
I: source.c: Created source 0 "alsa_output.0.analog-stereo.monitor" with sample spec s16le 2ch 44100Hz and channel map front-left,front-right
I: source.c: device.description = "Monitor of HDA Intel Analog Stereo"
I: source.c: device.class = "monitor"
I: source.c: device.icon_name = "audio-input-microphone"
I: alsa-sink.c: Using 2 fragments of size 32768 bytes, buffer time is 371.52ms
I: alsa-sink.c: Time scheduling watermark is 20.00ms
D: alsa-sink.c: hwbuf_unused=0
D: alsa-sink.c: setting avail_min=15502
D: alsa-mixer.c: Activating path analog-output
D: alsa-mixer.c: Path analog-output (Analog Output), direction=1, priority=100, probed=yes, supported=yes, has_mute=yes, has_volume=yes, has_dB=yes, min_volume=0, max_volume=31, min_dB=-144, max_dB=0
D: alsa-mixer.c: Element Master, direction=1, switch=1, volume=1, enumeration=0, required=0, required_absent=0, mask=0x7ffffffffffff, n_channels=1, override_map=yes
D: alsa-mixer.c: Element Headphone, direction=1, switch=2, volume=0, enumeration=0, required=0, required_absent=0, mask=0x0, n_channels=0, override_map=no
D: alsa-mixer.c: Element Front, direction=1, switch=1, volume=1, enumeration=0, required=0, required_absent=0, mask=0x6, n_channels=2, override_map=yes
D: alsa-mixer.c: Element Surround, direction=1, switch=1, volume=1, enumeration=0, required=0, required_absent=0, mask=0x60, n_channels=2, override_map=yes
D: alsa-mixer.c: Element Side, direction=1, switch=1, volume=1, enumeration=0, required=0, required_absent=0, mask=0xc00, n_channels=2, override_map=yes
D: alsa-mixer.c: Element Center, direction=1, switch=1, volume=1, enumeration=0, required=0, required_absent=0, mask=0x4900000000018, n_channels=1, override_map=yes
D: alsa-mixer.c: Element LFE, direction=1, switch=1, volume=1, enumeration=0, required=0, required_absent=0, mask=0x80, n_channels=1, override_map=yes
D: alsa-mixer.c: Element PCM, direction=1, switch=0, volume=1, enumeration=0, required=0, required_absent=0, mask=0x3600000000f66, n_channels=2, override_map=yes
I: alsa-sink.c: Hardware volume ranges from -144.00 dB to 0.00 dB.
I: alsa-sink.c: No particular base volume set, fixing to 0 dB
I: alsa-sink.c: Using hardware volume control. Hardware dB scale supported.
I: alsa-sink.c: Using hardware mute control.
D: alsa-util.c: snd_pcm_dump():
D: alsa-util.c: Soft volume PCM
D: alsa-util.c: Control: PCM Playback Volume
D: alsa-util.c: min_dB: -51
D: alsa-util.c: max_dB: 0
D: alsa-util.c: resolution: 256
D: alsa-util.c: Its setup is:
D: alsa-util.c: stream : PLAYBACK
D: alsa-util.c: access : MMAP_INTERLEAVED
D: alsa-util.c: format : S16_LE
D: alsa-util.c: subformat : STD
D: alsa-util.c: channels : 2
D: alsa-util.c: rate : 44100
D: alsa-util.c: exact rate : 44100 (44100/1)
D: alsa-util.c: msbits : 16
D: alsa-util.c: buffer_size : 16384
D: alsa-util.c: period_size : 8192
D: alsa-util.c: period_time : 185759
D: alsa-util.c: tstamp_mode : ENABLE
D: alsa-util.c: period_step : 1
D: alsa-util.c: avail_min : 15502
D: alsa-util.c: period_event : 0
D: alsa-util.c: start_threshold : -1
D: alsa-util.c: stop_threshold : 1073741824
D: alsa-util.c: silence_threshold: 0
D: alsa-util.c: silence_size : 0
D: alsa-util.c: boundary : 1073741824
D: alsa-util.c: Slave: Hardware PCM card 0 'HDA Intel' device 0 subdevice 0
D: alsa-util.c: Its setup is:
D: alsa-util.c: stream : PLAYBACK
D: alsa-util.c: access : MMAP_INTERLEAVED
D: alsa-util.c: format : S16_LE
D: alsa-util.c: subformat : STD
D: alsa-util.c: channels : 2
D: alsa-util.c: rate : 44100
D: alsa-util.c: exact rate : 44100 (44100/1)
D: alsa-util.c: msbits : 16
D: alsa-util.c: buffer_size : 16384
D: alsa-util.c: period_size : 8192
D: alsa-util.c: period_time : 185759
D: alsa-util.c: tstamp_mode : ENABLE
D: alsa-util.c: period_step : 1
D: alsa-util.c: avail_min : 15502
D: alsa-util.c: period_event : 0
D: alsa-util.c: start_threshold : -1
D: alsa-util.c: stop_threshold : 1073741824
D: alsa-util.c: silence_threshold: 0
D: alsa-util.c: silence_size : 0
D: alsa-util.c: boundary : 1073741824
D: alsa-util.c: appl_ptr : 0
D: alsa-util.c: hw_ptr : 0
D: alsa-sink.c: Thread starting up
I: core-util.c: Successfully enabled SCHED_RR scheduling for thread, with priority 4, which is lower than the requested 5.
D: alsa-sink.c: Read hardware volume: 0: 2% 1: 2%
I: alsa-sink.c: Starting playback.
D: alsa-sink.c: Cutting sleep time for the initial iterations by half.
D: alsa-sink.c: Cutting sleep time for the initial iterations by half.
D: alsa-sink.c: Cutting sleep time for the initial iterations by half.
I: module.c: Loaded "module-alsa-sink" (index: #4; argument: "device_id=0").
D: alsa-util.c: Checking for superset analog-stereo (front:%f)
D: alsa-util.c: Trying front:0 with SND_PCM_NO_AUTO_FORMAT ...
D: alsa-util.c: Managed to open front:0
D: alsa-util.c: Maximum hw buffer size is 371 ms
I: alsa-source.c: Successfully opened device front:0.
I: alsa-source.c: Selected mapping 'Analog Stereo' (analog-stereo).
I: alsa-source.c: Successfully enabled mmap() mode.
I: alsa-source.c: Successfully enabled timer-based scheduling mode.
I: (alsa-lib)control.c: Invalid CTL front:0
I: alsa-mixer.c: Unable to attach to mixer front:0: No such file or directory
I: alsa-mixer.c: Successfully attached to mixer 'hw:0'
D: alsa-mixer.c: Probing path 'analog-input'
D: alsa-mixer.c: Probing path 'analog-input-microphone'
D: alsa-mixer.c: Probe of element 'Mic' failed.
D: alsa-mixer.c: Probing path 'analog-input-linein'
D: alsa-mixer.c: Probe of element 'Line' failed.
D: alsa-mixer.c: Probing path 'analog-input'
D: alsa-mixer.c: Probe of element 'Aux' failed.
D: alsa-mixer.c: Probing path 'analog-input-video'
D: alsa-mixer.c: Probe of element 'Video' failed.
D: alsa-mixer.c: Probing path 'analog-input-video'
D: alsa-mixer.c: Probe of element 'TV Tuner' failed.
D: alsa-mixer.c: Probing path 'analog-input-radio'
D: alsa-mixer.c: Probe of element 'FM' failed.
D: alsa-mixer.c: Probing path 'analog-input'
D: alsa-mixer.c: Probe of element 'Mic/Line' failed.
D: alsa-source.c: Probed mixer paths:
D: alsa-mixer.c: Path Set 0x937e8d0, direction=2, probed=yes
D: alsa-mixer.c: Path analog-input (Analog Input), direction=2, priority=100, probed=yes, supported=yes, has_mute=yes, has_volume=yes, has_dB=yes, min_volume=0, max_volume=31, min_dB=-16.5, max_dB=30
D: alsa-mixer.c: Element Capture, direction=2, switch=1, volume=1, enumeration=0, required=2, required_absent=0, mask=0x403f600000000f66, n_channels=2, override_map=yes
D: alsa-mixer.c: Element Input Source, direction=2, switch=0, volume=0, enumeration=1, required=0, required_absent=0, mask=0x0, n_channels=0, override_map=no
D: alsa-mixer.c: Option Mic (input-microphone-1/Microphone 1) index=0, priority=20
D: alsa-mixer.c: Option Front Mic (input-microphone-2/Microphone 2) index=1, priority=19
D: alsa-mixer.c: Option Line (input-linein/Line-In) index=2, priority=18
D: alsa-mixer.c: Setting input-microphone-1 (Microphone 1) priority=20
D: alsa-mixer.c: Setting input-microphone-2 (Microphone 2) priority=19
D: alsa-mixer.c: Setting input-linein (Line-In) priority=18
D: dbus-util.c: Successfully connected to D-Bus system bus 8d3e5c152df117d47fd8bb784a99a94a as :1.43
D: alsa-mixer.c: Added 3 ports
I: source.c: Created source 1 "alsa_input.0.analog-stereo" with sample spec s16le 2ch 44100Hz and channel map front-left,front-right
I: source.c: alsa.resolution_bits = "16"
I: source.c: device.api = "alsa"
I: source.c: device.class = "sound"
I: source.c: alsa.class = "generic"
I: source.c: alsa.subclass = "generic-mix"
I: source.c: alsa.name = "ALC1200 Analog"
I: source.c: alsa.id = "ALC1200 Analog"
I: source.c: alsa.subdevice = "0"
I: source.c: alsa.subdevice_name = "subdevice #0"
I: source.c: alsa.device = "0"
I: source.c: alsa.card = "0"
I: source.c: alsa.card_name = "HDA Intel"
I: source.c: alsa.long_card_name = "HDA Intel at 0xfe8f4000 irq 22"
I: source.c: alsa.driver_name = "snd_hda_intel"
I: source.c: hal.udi = "/org/freedesktop/Hal/devices/pci_8086_3a3e_sound_card_0"
I: source.c: hal.product = "HDA Intel Sound Card"
I: source.c: hal.card_id = "HDA Intel"
I: source.c: device.string = "front:0"
I: source.c: device.buffering.buffer_size = "65536"
I: source.c: device.buffering.fragment_size = "32768"
I: source.c: device.access_mode = "mmap+timer"
I: source.c: device.profile.name = "analog-stereo"
I: source.c: device.profile.description = "Analog Stereo"
I: source.c: device.description = "HDA Intel Analog Stereo"
I: source.c: alsa.mixer_name = "Intel G45 DEVELK"
I: source.c: alsa.components = "HDA:10ec0888,104382fe,00100101 HDA:80862803,80860101,00100000"
I: source.c: device.icon_name = "audio-input-microphone-analog"
I: alsa-source.c: Using 2 fragments of size 32768 bytes, buffer time is 371.52ms
I: alsa-source.c: Time scheduling watermark is 20.00ms
D: alsa-source.c: hwbuf_unused=0
D: alsa-source.c: setting avail_min=15502
D: alsa-mixer.c: Activating path analog-input
D: alsa-mixer.c: Path analog-input (Analog Input), direction=2, priority=100, probed=yes, supported=yes, has_mute=yes, has_volume=yes, has_dB=yes, min_volume=0, max_volume=31, min_dB=-16.5, max_dB=30
D: alsa-mixer.c: Element Capture, direction=2, switch=1, volume=1, enumeration=0, required=2, required_absent=0, mask=0x403f600000000f66, n_channels=2, override_map=yes
D: alsa-mixer.c: Element Input Source, direction=2, switch=0, volume=0, enumeration=1, required=0, required_absent=0, mask=0x0, n_channels=0, override_map=no
D: alsa-mixer.c: Option Mic (input-microphone-1/Microphone 1) index=0, priority=20
D: alsa-mixer.c: Option Front Mic (input-microphone-2/Microphone 2) index=1, priority=19
D: alsa-mixer.c: Option Line (input-linein/Line-In) index=2, priority=18
D: alsa-mixer.c: Setting input-microphone-1 (Microphone 1) priority=20
D: alsa-mixer.c: Setting input-microphone-2 (Microphone 2) priority=19
D: alsa-mixer.c: Setting input-linein (Line-In) priority=18
I: alsa-source.c: Hardware volume ranges from -16.50 dB to 30.00 dB.
I: alsa-source.c: Fixing base volume to -30.00 dB
I: alsa-source.c: Using hardware volume control. Hardware dB scale supported.
I: alsa-source.c: Using hardware mute control.
D: alsa-util.c: snd_pcm_dump():
D: alsa-util.c: Soft volume PCM
D: alsa-util.c: Control: PCM Playback Volume
D: alsa-util.c: min_dB: -51
D: alsa-util.c: max_dB: 0
D: alsa-util.c: resolution: 256
D: alsa-util.c: Its setup is:
D: alsa-util.c: stream : CAPTURE
D: alsa-util.c: access : MMAP_INTERLEAVED
D: alsa-util.c: format : S16_LE
D: alsa-util.c: subformat : STD
D: alsa-util.c: channels : 2
D: alsa-util.c: rate : 44100
D: alsa-util.c: exact rate : 44100 (44100/1)
D: alsa-util.c: msbits : 16
D: alsa-util.c: buffer_size : 16384
D: alsa-util.c: period_size : 8192
D: alsa-util.c: period_time : 185759
D: alsa-util.c: tstamp_mode : ENABLE
D: alsa-util.c: period_step : 1
D: alsa-util.c: avail_min : 15502
D: alsa-util.c: period_event : 0
D: alsa-util.c: start_threshold : -1
D: alsa-util.c: stop_threshold : 1073741824
D: alsa-util.c: silence_threshold: 0
D: alsa-util.c: silence_size : 0
D: alsa-util.c: boundary : 1073741824
D: alsa-util.c: Slave: Hardware PCM card 0 'HDA Intel' device 0 subdevice 0
D: alsa-util.c: Its setup is:
D: alsa-util.c: stream : CAPTURE
D: alsa-util.c: access : MMAP_INTERLEAVED
D: alsa-util.c: format : S16_LE
D: alsa-util.c: subformat : STD
D: alsa-util.c: channels : 2
D: alsa-util.c: rate : 44100
D: alsa-util.c: exact rate : 44100 (44100/1)
D: alsa-util.c: msbits : 16
D: alsa-util.c: buffer_size : 16384
D: alsa-util.c: period_size : 8192
D: alsa-util.c: period_time : 185759
D: alsa-util.c: tstamp_mode : ENABLE
D: alsa-util.c: period_step : 1
D: alsa-util.c: avail_min : 15502
D: alsa-util.c: period_event : 0
D: alsa-util.c: start_threshold : -1
D: alsa-util.c: stop_threshold : 1073741824
D: alsa-util.c: silence_threshold: 0
D: alsa-util.c: silence_size : 0
D: alsa-util.c: boundary : 1073741824
D: alsa-util.c: appl_ptr : 0
D: alsa-util.c: hw_ptr : 0
D: alsa-source.c: Read hardware volume: 0: 19% 1: 19%
D: alsa-source.c: Thread starting up
I: core-util.c: Successfully enabled SCHED_RR scheduling for thread, with priority 4, which is lower than the requested 5.
I: module.c: Loaded "module-alsa-source" (index: #5; argument: "device_id=0").
I: module-detect.c: loaded 2 modules.
I: module.c: Loaded "module-detect" (index: #6; argument: "").
D: cli-command.c: Checking for existance of '/usr/lib/pulse-0.9.16/modules/module-bluetooth-discover.so': success
D: dbus-util.c: Successfully connected to D-Bus system bus 8d3e5c152df117d47fd8bb784a99a94a as :1.44
D: bluetooth-util.c: dbus: interface=org.freedesktop.DBus, path=/org/freedesktop/DBus, member=NameAcquired
I: module.c: Loaded "module-bluetooth-discover" (index: #7; argument: "").
D: cli-command.c: Checking for existance of '/usr/lib/pulse-0.9.16/modules/module-esound-protocol-unix.so': success
I: module.c: Loaded "module-esound-protocol-unix" (index: #8; argument: "").
I: module.c: Loaded "module-native-protocol-unix" (index: #9; argument: "").
D: cli-command.c: Checking for existance of '/usr/lib/pulse-0.9.16/modules/module-gconf.so': success
I: module.c: Loaded "module-gconf" (index: #10; argument: "").
I: module.c: Loaded "module-default-device-restore" (index: #11; argument: "").
I: module.c: Loaded "module-rescue-streams" (index: #12; argument: "").
I: module.c: Loaded "module-always-sink" (index: #13; argument: "").
I: module.c: Loaded "module-intended-roles" (index: #14; argument: "").
D: module-suspend-on-idle.c: Sink alsa_output.0.analog-stereo becomes idle, timeout in 5 seconds.
D: module-suspend-on-idle.c: Source alsa_input.0.analog-stereo becomes idle, timeout in 5 seconds.
I: module.c: Loaded "module-suspend-on-idle" (index: #15; argument: "").
I: client.c: Created 0 "ConsoleKit Session /org/freedesktop/ConsoleKit/Session2"
D: module-console-kit.c: Added new session /org/freedesktop/ConsoleKit/Session2
I: module.c: Loaded "module-console-kit" (index: #16; argument: "").
I: module.c: Loaded "module-position-event-sounds" (index: #17; argument: "").
I: module.c: Loaded "module-cork-music-on-phone" (index: #18; argument: "").
D: main.c: Got org.pulseaudio.Server!
I: main.c: Daemon startup complete.
I: module.c: Unloading "module-detect" (index: #6).
I: module.c: Unloaded "module-detect" (index: #6).
D: core-subscribe.c: Dropped redundant event due to remove event.
I: module-device-restore.c: Storing volume/mute/port for device sink:alsa_output.0.analog-stereo.
I: module-device-restore.c: Storing volume/mute/port for device source:alsa_output.0.analog-stereo.monitor.
I: module-device-restore.c: Storing volume/mute/port for device source:alsa_input.0.analog-stereo.
I: module-suspend-on-idle.c: Source alsa_input.0.analog-stereo idle for too long, suspending ...
D: source.c: Suspend cause of source alsa_input.0.analog-stereo is 0x0004, suspending
I: alsa-source.c: Device suspended...
I: module-suspend-on-idle.c: Sink alsa_output.0.analog-stereo idle for too long, suspending ...
D: sink.c: Suspend cause of sink alsa_output.0.analog-stereo is 0x0004, suspending
I: alsa-sink.c: Device suspended...
D: reserve-wrap.c: Device lock status of reserve-monitor-wrapper at Audio0 changed: not busy
I: main.c: Got signal SIGINT.
I: main.c: Exiting.
I: main.c: Daemon shutdown initiated.
I: module.c: Unloading "module-device-restore" (index: #0).
I: module.c: Unloaded "module-device-restore" (index: #0).
I: module.c: Unloading "module-stream-restore" (index: #1).
I: module.c: Unloaded "module-stream-restore" (index: #1).
I: module.c: Unloading "module-card-restore" (index: #2).
I: module.c: Unloaded "module-card-restore" (index: #2).
I: module.c: Unloading "module-augment-properties" (index: #3).
I: module.c: Unloaded "module-augment-properties" (index: #3).
I: module.c: Unloading "module-alsa-sink" (index: #4).
D: alsa-sink.c: Thread shutting down
I: sink.c: Freeing sink 0 "alsa_output.0.analog-stereo"
I: source.c: Freeing source 0 "alsa_output.0.analog-stereo.monitor"
I: module.c: Unloaded "module-alsa-sink" (index: #4).
I: module.c: Unloading "module-alsa-source" (index: #5).
D: alsa-source.c: Thread shutting down
I: source.c: Freeing source 1 "alsa_input.0.analog-stereo"
I: module.c: Unloaded "module-alsa-source" (index: #5).
I: module.c: Unloading "module-bluetooth-discover" (index: #7).
I: module.c: Unloaded "module-bluetooth-discover" (index: #7).
I: module.c: Unloading "module-esound-protocol-unix" (index: #8).
I: module.c: Unloaded "module-esound-protocol-unix" (index: #8).
I: module.c: Unloading "module-native-protocol-unix" (index: #9).
I: module.c: Unloaded "module-native-protocol-unix" (index: #9).
I: module.c: Unloading "module-gconf" (index: #10).
I: module.c: Unloaded "module-gconf" (index: #10).
I: module.c: Unloading "module-default-device-restore" (index: #11).
I: module.c: Unloaded "module-default-device-restore" (index: #11).
I: module.c: Unloading "module-rescue-streams" (index: #12).
I: module.c: Unloaded "module-rescue-streams" (index: #12).
I: module.c: Unloading "module-always-sink" (index: #13).
I: module.c: Unloaded "module-always-sink" (index: #13).
I: module.c: Unloading "module-intended-roles" (index: #14).
I: module.c: Unloaded "module-intended-roles" (index: #14).
I: module.c: Unloading "module-suspend-on-idle" (index: #15).
I: module.c: Unloaded "module-suspend-on-idle" (index: #15).
I: module.c: Unloading "module-console-kit" (index: #16).
D: module-console-kit.c: Removing session /org/freedesktop/ConsoleKit/Session2
I: client.c: Freed 0 "ConsoleKit Session /org/freedesktop/ConsoleKit/Session2"
I: module.c: Unloaded "module-console-kit" (index: #16).
I: module.c: Unloading "module-position-event-sounds" (index: #17).
I: module.c: Unloaded "module-position-event-sounds" (index: #17).
I: module.c: Unloading "module-cork-music-on-phone" (index: #18).
I: module.c: Unloaded "module-cork-music-on-phone" (index: #18).
I: main.c: Daemon terminated.
More information about the Pkg-pulseaudio-devel
mailing list