Bug#999757: pulseaudio: My system has no audio and pavucontrol sees no cards in the configuration tab
Maximiliano Estudies
maxiestudies at gmail.com
Sun Oct 9 14:48:55 BST 2022
Package: pulseaudio
Version: 16.1+dfsg1-2
Followup-For: Bug #999757
X-Debbugs-Cc: maxiestudies at gmail.com
After updating pulseaudio can't see any cards or sinks. pavucontrol won't list any card in the configuration tab,
and pactl show cards returns nothing. Weirdly pacmd list-cards and pacmd list-sinks do show the correct
information but the sink state is IDLE
-- Package-specific info:
File '/etc/default/pulseaudio' does not exist
-- System Information:
Debian Release: bookworm/sid
APT prefers testing
APT policy: (500, 'testing')
Architecture: amd64 (x86_64)
Kernel: Linux 5.19.0-2-amd64 (SMP w/16 CPU threads; PREEMPT)
Locale: LANG=en_IE.UTF-8, LC_CTYPE=en_IE.UTF-8 (charmap=UTF-8), LANGUAGE not set
Shell: /bin/sh linked to /usr/bin/dash
Init: systemd (via /run/systemd/system)
LSM: AppArmor: enabled
Versions of packages pulseaudio depends on:
ii adduser 3.129
ii init-system-helpers 1.65.2
ii libasound2 1.2.7.2-1
ii libasound2-plugins 1.2.7.1-1
ii libc6 2.35-2
ii libcap2 1:2.44-1
ii libdbus-1-3 1.14.4-1
ii libfftw3-single3 3.3.8-2
ii libgcc-s1 12.2.0-3
ii libglib2.0-0 2.74.0-2
ii libgstreamer-plugins-base1.0-0 1.20.3-2
ii libgstreamer1.0-0 1.20.3-1
ii libice6 2:1.0.10-1
ii libltdl7 2.4.7-4
ii liborc-0.4-0 1:0.4.32-2
ii libpulse0 16.1+dfsg1-2
ii libsm6 2:1.2.3-1
ii libsndfile1 1.1.0-3
ii libsoxr0 0.1.3-4
ii libspeexdsp1 1.2.1-1
ii libstdc++6 12.2.0-3
ii libsystemd0 251.5-1
ii libtdb1 1.4.7-1
ii libudev1 251.5-1
ii libwebrtc-audio-processing1 0.3-1+b1
ii libwrap0 7.6.q-31
ii libx11-6 2:1.8.1-2
ii libx11-xcb1 2:1.8.1-2
ii libxcb1 1.15-1
ii libxtst6 2:1.2.3-1.1
ii lsb-base 11.4
ii pulseaudio-utils 16.1+dfsg1-2
ii sysvinit-utils [lsb-base] 3.05-6
Versions of packages pulseaudio recommends:
ii dbus-user-session 1.14.4-1
ii libpam-systemd [logind] 251.5-1
ii rtkit 0.13-4
Versions of packages pulseaudio suggests:
pn paprefs <none>
ii pavucontrol 5.0-2
pn pavumeter <none>
ii udev 251.5-1
-- Configuration Files:
/etc/pulse/default.pa changed:
.fail
load-module module-device-restore
load-module module-stream-restore
load-module module-card-restore
load-module module-augment-properties
load-module module-switch-on-port-available
.ifexists module-udev-detect.so
load-module module-udev-detect
.else
load-module module-detect
.endif
.ifexists module-jackdbus-detect.so
.nofail
load-module module-jackdbus-detect channels=2
.fail
.endif
.ifexists module-bluetooth-policy.so
load-module module-bluetooth-policy
.endif
.ifexists module-bluetooth-discover.so
load-module module-bluetooth-discover
.endif
.ifexists module-esound-protocol-unix.so
load-module module-esound-protocol-unix
.endif
load-module module-native-protocol-unix
.ifexists module-gsettings.so
.nofail
load-module module-gsettings
.fail
.endif
load-module module-default-device-restore
load-module module-always-sink
load-module module-intended-roles
.ifexists module-console-kit.so
load-module module-console-kit
.endif
.ifexists module-systemd-login.so
load-module module-systemd-login
.endif
load-module module-position-event-sounds
load-module module-role-cork
load-module module-filter-heuristics
load-module module-filter-apply
.nofail
.include /etc/pulse/default.pa.d
-- no debconf information
-------------- next part --------------
# This file is part of PulseAudio.
#
# PulseAudio is free software; you can redistribute it and/or modify
# it under the terms of the GNU Lesser General Public License as published by
# the Free Software Foundation; either version 2 of the License, or
# (at your option) any later version.
#
# PulseAudio is distributed in the hope that it will be useful, but
# WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
# General Public License for more details.
#
# You should have received a copy of the GNU Lesser General Public License
# along with PulseAudio; if not, see <http://www.gnu.org/licenses/>.
## Configuration file for PulseAudio clients. See pulse-client.conf(5) for
## more information. Default values are commented out. Use either ; or # for
## commenting.
; default-sink =
; default-source =
; default-server =
; default-dbus-server =
; autospawn = yes
; daemon-binary = /usr/bin/pulseaudio
; extra-arguments = --log-target=syslog
; cookie-file =
; enable-shm = yes
; shm-size-bytes = 0 # setting this 0 will use the system-default, usually 64 MiB
; auto-connect-localhost = no
; auto-connect-display = no
-------------- next part --------------
# This file is part of PulseAudio.
#
# PulseAudio is free software; you can redistribute it and/or modify
# it under the terms of the GNU Lesser General Public License as published by
# the Free Software Foundation; either version 2 of the License, or
# (at your option) any later version.
#
# PulseAudio is distributed in the hope that it will be useful, but
# WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
# General Public License for more details.
#
# You should have received a copy of the GNU Lesser General Public License
# along with PulseAudio; if not, see <http://www.gnu.org/licenses/>.
## Configuration file for the PulseAudio daemon. See pulse-daemon.conf(5) for
## more information. Default values are commented out. Use either ; or # for
## commenting.
; daemonize = no
; fail = yes
; allow-module-loading = yes
; allow-exit = yes
; use-pid-file = yes
; system-instance = no
; local-server-type = user
; enable-shm = yes
; enable-memfd = yes
; shm-size-bytes = 0 # setting this 0 will use the system-default, usually 64 MiB
; lock-memory = no
; cpu-limit = no
; high-priority = yes
; nice-level = -11
; realtime-scheduling = yes
; realtime-priority = 5
; exit-idle-time = 20
; scache-idle-time = 20
; dl-search-path = (depends on architecture)
; load-default-script-file = yes
; default-script-file = /etc/pulse/default.pa
; log-target = auto
; log-level = notice
; log-meta = no
; log-time = no
; log-backtrace = 0
; resample-method = speex-float-1
; avoid-resampling = false
; enable-remixing = yes
; remixing-use-all-sink-channels = yes
; remixing-produce-lfe = no
; remixing-consume-lfe = no
; lfe-crossover-freq = 0
; flat-volumes = no
; rescue-streams = yes
; rlimit-fsize = -1
; rlimit-data = -1
; rlimit-stack = -1
; rlimit-core = -1
; rlimit-as = -1
; rlimit-rss = -1
; rlimit-nproc = -1
; rlimit-nofile = 256
; rlimit-memlock = -1
; rlimit-locks = -1
; rlimit-sigpending = -1
; rlimit-msgqueue = -1
; rlimit-nice = 31
; rlimit-rtprio = 9
; rlimit-rttime = 200000
; default-sample-format = s16le
; default-sample-rate = 44100
; alternate-sample-rate = 48000
; default-sample-channels = 2
; default-channel-map = front-left,front-right
; default-fragments = 4
; default-fragment-size-msec = 25
; enable-deferred-volume = yes
; deferred-volume-safety-margin-usec = 8000
; deferred-volume-extra-delay-usec = 0
-------------- next part --------------
#!/usr/bin/pulseaudio -nF
#
# This file is part of PulseAudio.
#
# PulseAudio is free software; you can redistribute it and/or modify it
# under the terms of the GNU Lesser General Public License as published by
# the Free Software Foundation; either version 2 of the License, or
# (at your option) any later version.
#
# PulseAudio is distributed in the hope that it will be useful, but
# WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
# General Public License for more details.
#
# You should have received a copy of the GNU Lesser General Public License
# along with PulseAudio; if not, see <http://www.gnu.org/licenses/>.
# This startup script is used only if PulseAudio is started per-user
# (i.e. not in system mode)
.fail
### Automatically restore the volume of streams and devices
load-module module-device-restore
load-module module-stream-restore
load-module module-card-restore
### Automatically augment property information from .desktop files
### stored in /usr/share/application
load-module module-augment-properties
### Should be after module-*-restore but before module-*-detect
load-module module-switch-on-port-available
### Load audio drivers statically
### (it's probably better to not load these drivers manually, but instead
### use module-udev-detect -- see below -- for doing this automatically)
#load-module module-alsa-sink
#load-module module-alsa-source device=hw:1,0
#load-module module-oss device="/dev/dsp" sink_name=output source_name=input
#load-module module-oss-mmap device="/dev/dsp" sink_name=output source_name=input
#load-module module-null-sink
#load-module module-pipe-sink
### Automatically load driver modules depending on the hardware available
.ifexists module-udev-detect.so
load-module module-udev-detect
.else
### Use the static hardware detection module (for systems that lack udev support)
load-module module-detect
.endif
### Automatically connect sink and source if JACK server is present
.ifexists module-jackdbus-detect.so
.nofail
load-module module-jackdbus-detect channels=2
.fail
.endif
### Automatically load driver modules for Bluetooth hardware
.ifexists module-bluetooth-policy.so
load-module module-bluetooth-policy
.endif
.ifexists module-bluetooth-discover.so
load-module module-bluetooth-discover
.endif
### Load several protocols
.ifexists module-esound-protocol-unix.so
load-module module-esound-protocol-unix
.endif
load-module module-native-protocol-unix
### Network access (may be configured with paprefs, so leave this commented
### here if you plan to use paprefs)
#load-module module-esound-protocol-tcp
#load-module module-native-protocol-tcp
#load-module module-zeroconf-publish
### Load the RTP receiver module (also configured via paprefs, see above)
#load-module module-rtp-recv
### Load the RTP sender module (also configured via paprefs, see above)
#load-module module-null-sink sink_name=rtp format=s16be channels=2 rate=44100 sink_properties="device.description='RTP Multicast Sink'"
#load-module module-rtp-send source=rtp.monitor
### Load additional modules from GSettings. This can be configured with the paprefs tool.
### Please keep in mind that the modules configured by paprefs might conflict with manually
### loaded modules.
.ifexists module-gsettings.so
.nofail
load-module module-gsettings
.fail
.endif
### Automatically restore the default sink/source when changed by the user
### during runtime
### NOTE: This should be loaded as early as possible so that subsequent modules
### that look up the default sink/source get the right value
load-module module-default-device-restore
### Make sure we always have a sink around, even if it is a null sink.
load-module module-always-sink
### Honour intended role device property
load-module module-intended-roles
### Automatically suspend sinks/sources that become idle for too long
#load-module module-suspend-on-idle
### If autoexit on idle is enabled we want to make sure we only quit
### when no local session needs us anymore.
.ifexists module-console-kit.so
load-module module-console-kit
.endif
.ifexists module-systemd-login.so
load-module module-systemd-login
.endif
### Enable positioned event sounds
load-module module-position-event-sounds
### Cork music/video streams when a phone stream is active
load-module module-role-cork
### Modules to allow autoloading of filters (such as echo cancellation)
### on demand. module-filter-heuristics tries to determine what filters
### make sense, and module-filter-apply does the heavy-lifting of
### loading modules and rerouting streams.
load-module module-filter-heuristics
load-module module-filter-apply
### Make some devices default
#set-default-sink output
#set-default-source input
### Allow including a default.pa.d directory, which if present, can be used
### for additional configuration snippets.
### Note that those snippet files must have a .pa file extension, not .conf
.nofail
.include /etc/pulse/default.pa.d
-------------- next part --------------
#!/usr/bin/pulseaudio -nF
#
# This file is part of PulseAudio.
#
# PulseAudio is free software; you can redistribute it and/or modify it
# under the terms of the GNU Lesser General Public License as published by
# the Free Software Foundation; either version 2 of the License, or
# (at your option) any later version.
#
# PulseAudio is distributed in the hope that it will be useful, but
# WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
# General Public License for more details.
#
# You should have received a copy of the GNU Lesser General Public License
# along with PulseAudio; if not, see <http://www.gnu.org/licenses/>.
# This startup script is used only if PulseAudio is started in system
# mode.
### Automatically restore the volume of streams and devices
load-module module-device-restore
load-module module-stream-restore
load-module module-card-restore
### Automatically load driver modules depending on the hardware available
.ifexists module-udev-detect.so
load-module module-udev-detect
.else
### Use the static hardware detection module (for systems that lack udev/hal support)
load-module module-detect
.endif
### Load several protocols
.ifexists module-esound-protocol-unix.so
load-module module-esound-protocol-unix
.endif
load-module module-native-protocol-unix
### Automatically restore the default sink/source when changed by the user
### during runtime
### NOTE: This should be loaded as early as possible so that subsequent modules
### that look up the default sink/source get the right value
load-module module-default-device-restore
### Make sure we always have a sink around, even if it is a null sink.
load-module module-always-sink
### Automatically suspend sinks/sources that become idle for too long
load-module module-suspend-on-idle
### Enable positioned event sounds
load-module module-position-event-sounds
### Allow including a system.pa.d directory, which if present, can be used
### for additional configuration snippets.
### Note that those snippet files must have a .pa file extension, not .conf
.nofail
.include /etc/pulse/system.pa.d
-------------- next part --------------
null
Discard all samples (playback) or generate zero samples (capture)
lavrate
Rate Converter Plugin Using Libav/FFmpeg Library
samplerate
Rate Converter Plugin Using Samplerate Library
speexrate
Rate Converter Plugin Using Speex Resampler
jack
JACK Audio Connection Kit
oss
Open Sound System
pulse
PulseAudio Sound Server
speex
Plugin using Speex DSP (resample, agc, denoise, echo, dereverb)
upmix
Plugin for channel upmix (4,6,8)
vdownmix
Plugin for channel downmix (stereo) with a simple spacialization
rawjack
default
Playback/recording through the PulseAudio sound server
hw:CARD=Generic,DEV=3
HD-Audio Generic, HDMI 0
Direct hardware device without any conversions
hw:CARD=Generic,DEV=7
HD-Audio Generic, HDMI 1
Direct hardware device without any conversions
hw:CARD=Generic,DEV=8
HD-Audio Generic, HDMI 2
Direct hardware device without any conversions
plughw:CARD=Generic,DEV=3
HD-Audio Generic, HDMI 0
Hardware device with all software conversions
plughw:CARD=Generic,DEV=7
HD-Audio Generic, HDMI 1
Hardware device with all software conversions
plughw:CARD=Generic,DEV=8
HD-Audio Generic, HDMI 2
Hardware device with all software conversions
hdmi:CARD=Generic,DEV=0
HD-Audio Generic, HDMI 0
HDMI Audio Output
hdmi:CARD=Generic,DEV=1
HD-Audio Generic, HDMI 1
HDMI Audio Output
hdmi:CARD=Generic,DEV=2
HD-Audio Generic, HDMI 2
HDMI Audio Output
dmix:CARD=Generic,DEV=3
HD-Audio Generic, HDMI 0
Direct sample mixing device
dmix:CARD=Generic,DEV=7
HD-Audio Generic, HDMI 1
Direct sample mixing device
dmix:CARD=Generic,DEV=8
HD-Audio Generic, HDMI 2
Direct sample mixing device
usbstream:CARD=Generic
HD-Audio Generic
USB Stream Output
hw:CARD=Generic_1,DEV=0
HD-Audio Generic, ALC257 Analog
Direct hardware device without any conversions
plughw:CARD=Generic_1,DEV=0
HD-Audio Generic, ALC257 Analog
Hardware device with all software conversions
sysdefault:CARD=Generic_1
HD-Audio Generic, ALC257 Analog
Default Audio Device
front:CARD=Generic_1,DEV=0
HD-Audio Generic, ALC257 Analog
Front output / input
surround21:CARD=Generic_1,DEV=0
HD-Audio Generic, ALC257 Analog
2.1 Surround output to Front and Subwoofer speakers
surround40:CARD=Generic_1,DEV=0
HD-Audio Generic, ALC257 Analog
4.0 Surround output to Front and Rear speakers
surround41:CARD=Generic_1,DEV=0
HD-Audio Generic, ALC257 Analog
4.1 Surround output to Front, Rear and Subwoofer speakers
surround50:CARD=Generic_1,DEV=0
HD-Audio Generic, ALC257 Analog
5.0 Surround output to Front, Center and Rear speakers
surround51:CARD=Generic_1,DEV=0
HD-Audio Generic, ALC257 Analog
5.1 Surround output to Front, Center, Rear and Subwoofer speakers
surround71:CARD=Generic_1,DEV=0
HD-Audio Generic, ALC257 Analog
7.1 Surround output to Front, Center, Side, Rear and Woofer speakers
dmix:CARD=Generic_1,DEV=0
HD-Audio Generic, ALC257 Analog
Direct sample mixing device
usbstream:CARD=Generic_1
HD-Audio Generic
USB Stream Output
usbstream:CARD=acp
acp
USB Stream Output
-------------- next part --------------
Module #1
Name: libpipewire-module-rt
Argument: {
nice.level = -11
#rt.prio = 88
#rt.time.soft = -1
#rt.time.hard = -1
}
Usage counter: n/a
Properties:
module.name = "libpipewire-module-rt"
object.id = "1"
object.serial = "1"
module.author = "Wim Taymans <wim.taymans at gmail.com>"
module.description = "Use realtime thread scheduling, falling back to RTKit"
module.usage = "[nice.level=<priority: default 20(don't change)>] [rt.prio=<priority: default 88>] [rt.time.soft=<in usec: default -1] [rt.time.hard=<in usec: default -1] "
module.version = "0.3.59"
nice.level = "-11"
Module #2
Name: libpipewire-module-protocol-native
Argument:
Usage counter: n/a
Properties:
module.name = "libpipewire-module-protocol-native"
object.id = "2"
object.serial = "2"
module.author = "Wim Taymans <wim.taymans at gmail.com>"
module.description = "Native protocol using unix sockets"
module.version = "0.3.59"
Module #3
Name: libpipewire-module-profiler
Argument:
Usage counter: n/a
Properties:
module.name = "libpipewire-module-profiler"
object.id = "3"
object.serial = "3"
module.author = "Wim Taymans <wim.taymans at gmail.com>"
module.description = "Generate Profiling data"
module.version = "0.3.59"
Module #5
Name: libpipewire-module-metadata
Argument:
Usage counter: n/a
Properties:
module.name = "libpipewire-module-metadata"
object.id = "5"
object.serial = "5"
module.author = "Wim Taymans <wim.taymans at gmail.com>"
module.description = "Allow clients to create metadata store"
module.version = "0.3.59"
Module #7
Name: libpipewire-module-spa-device-factory
Argument:
Usage counter: n/a
Properties:
module.name = "libpipewire-module-spa-device-factory"
object.id = "7"
object.serial = "7"
module.author = "Wim Taymans <wim.taymans at gmail.com>"
module.description = "Provide a factory to make SPA devices"
module.version = "0.3.59"
Module #9
Name: libpipewire-module-spa-node-factory
Argument:
Usage counter: n/a
Properties:
module.name = "libpipewire-module-spa-node-factory"
object.id = "9"
object.serial = "9"
module.author = "Wim Taymans <wim.taymans at gmail.com>"
module.description = "Provide a factory to make SPA nodes"
module.version = "0.3.59"
Module #11
Name: libpipewire-module-client-node
Argument:
Usage counter: n/a
Properties:
module.name = "libpipewire-module-client-node"
object.id = "11"
object.serial = "11"
module.author = "Wim Taymans <wim.taymans at gmail.com>"
module.description = "Allow clients to create and control remote nodes"
module.version = "0.3.59"
Module #13
Name: libpipewire-module-client-device
Argument:
Usage counter: n/a
Properties:
module.name = "libpipewire-module-client-device"
object.id = "13"
object.serial = "13"
module.author = "Wim Taymans <wim.taymans at gmail.com>"
module.description = "Allow clients to create and control remote devices"
module.version = "0.3.59"
Module #15
Name: libpipewire-module-portal
Argument:
Usage counter: n/a
Properties:
module.name = "libpipewire-module-portal"
object.id = "15"
object.serial = "15"
Module #16
Name: libpipewire-module-access
Argument: {
# access.allowed to list an array of paths of allowed
# apps.
#access.allowed = [
# /usr/bin/pipewire-media-session
#]
# An array of rejected paths.
#access.rejected = [ ]
# An array of paths with restricted access.
#access.restricted = [ ]
# Anything not in the above lists gets assigned the
# access.force permission.
#access.force = flatpak
}
Usage counter: n/a
Properties:
module.name = "libpipewire-module-access"
object.id = "16"
object.serial = "16"
module.author = "Wim Taymans <wim.taymans at gmail.com>"
module.description = "Perform access check"
module.usage = "[ access.force=flatpak ] [ access.allowed=<cmd-line> ] [ access.rejected=<cmd-line> ] [ access.restricted=<cmd-line> ] "
module.version = "0.3.59"
Module #17
Name: libpipewire-module-adapter
Argument:
Usage counter: n/a
Properties:
module.name = "libpipewire-module-adapter"
object.id = "17"
object.serial = "17"
module.author = "Wim Taymans <wim.taymans at gmail.com>"
module.description = "Manage adapter nodes"
module.version = "0.3.59"
Module #19
Name: libpipewire-module-link-factory
Argument:
Usage counter: n/a
Properties:
module.name = "libpipewire-module-link-factory"
object.id = "19"
object.serial = "19"
module.author = "Wim Taymans <wim.taymans at gmail.com>"
module.description = "Allow clients to create links"
module.version = "0.3.59"
Module #21
Name: libpipewire-module-session-manager
Argument:
Usage counter: n/a
Properties:
module.name = "libpipewire-module-session-manager"
object.id = "21"
object.serial = "21"
module.author = "George Kiagiadakis <george.kiagiadakis at collabora.com>"
module.description = "Implements objects for session management"
module.version = "0.3.59"
Module #536870912
Name: module-always-sink
Argument:
Usage counter: n/a
Properties:
module.author = "Pauli Virtanen <pav at iki.fi>"
module.description = "Always keeps at least one sink loaded even if it's a null one"
module.usage = "sink_name=<name of sink>"
module.version = "0.3.59"
Sink #36
State: SUSPENDED
Name: auto_null
Description: Dummy Output
Driver: PipeWire
Sample Specification: float32le 2ch 48000Hz
Channel Map: front-left,front-right
Owner Module: 4294967295
Mute: no
Volume: front-left: 65536 / 100% / 0.00 dB, front-right: 65536 / 100% / 0.00 dB
balance 0.00
Base Volume: 65536 / 100% / 0.00 dB
Monitor Source: auto_null.monitor
Latency: 0 usec, configured 0 usec
Flags: DECIBEL_VOLUME LATENCY
Properties:
node.name = "auto_null"
device.description = "Dummy Output"
audio.rate = "48000"
audio.channels = "2"
audio.position = "FL,FR"
media.class = "Audio/Sink"
factory.name = "support.null-audio-sink"
node.virtual = "true"
monitor.channel-volumes = "true"
factory.id = "18"
clock.quantum-limit = "8192"
client.id = "35"
node.driver = "true"
factory.mode = "merge"
audio.adapt.follower = ""
library.name = "audioconvert/libspa-audioconvert"
object.id = "36"
object.serial = "36"
Formats:
pcm
Source #36
State: SUSPENDED
Name: auto_null.monitor
Description: Monitor of Dummy Output
Driver: PipeWire
Sample Specification: float32le 2ch 48000Hz
Channel Map: front-left,front-right
Owner Module: 4294967295
Mute: no
Volume: front-left: 65536 / 100% / 0.00 dB, front-right: 65536 / 100% / 0.00 dB
balance 0.00
Base Volume: 65536 / 100% / 0.00 dB
Monitor of Sink: auto_null
Latency: 0 usec, configured 0 usec
Flags: DECIBEL_VOLUME LATENCY
Properties:
node.name = "auto_null"
device.description = "Dummy Output"
audio.rate = "48000"
audio.channels = "2"
audio.position = "FL,FR"
media.class = "Audio/Sink"
factory.name = "support.null-audio-sink"
node.virtual = "true"
monitor.channel-volumes = "true"
factory.id = "18"
clock.quantum-limit = "8192"
client.id = "35"
node.driver = "true"
factory.mode = "merge"
audio.adapt.follower = ""
library.name = "audioconvert/libspa-audioconvert"
object.id = "36"
object.serial = "36"
device.class = "monitor"
Formats:
pcm
Client #35
Driver: PipeWire
Owner Module: 2
Properties:
pipewire.protocol = "protocol-native"
pipewire.sec.pid = "4138"
pipewire.sec.uid = "1000"
pipewire.sec.gid = "1000"
module.id = "2"
object.id = "35"
object.serial = "35"
config.name = "pipewire-pulse.conf"
cpu.max-align = "32"
default.clock.rate = "48000"
default.clock.quantum = "1024"
default.clock.min-quantum = "32"
default.clock.max-quantum = "2048"
default.clock.quantum-limit = "8192"
default.video.width = "640"
default.video.height = "480"
default.video.rate.num = "25"
default.video.rate.denom = "1"
log.level = "2"
clock.power-of-two-quantum = "true"
link.max-buffers = "64"
mem.warn-mlock = "false"
mem.allow-mlock = "true"
settings.check-quantum = "false"
settings.check-rate = "false"
application.name = "pipewire"
application.process.binary = "pipewire"
application.language = "en_IE.UTF-8"
application.process.id = "4138"
application.process.user = "maxi"
application.process.host = "maxi-thinkpad"
core.version = "0.3.59"
core.name = "pipewire-maxi-4138"
pipewire.access = "unrestricted"
Client #31
Driver: PipeWire
Owner Module: 2
Properties:
pipewire.protocol = "protocol-native"
pipewire.sec.pid = "4137"
pipewire.sec.uid = "1000"
pipewire.sec.gid = "1000"
module.id = "2"
object.id = "31"
object.serial = "31"
config.prefix = "media-session.d"
config.name = "media-session.conf"
cpu.max-align = "32"
default.clock.rate = "48000"
default.clock.quantum = "1024"
default.clock.min-quantum = "32"
default.clock.max-quantum = "2048"
default.clock.quantum-limit = "8192"
default.video.width = "640"
default.video.height = "480"
default.video.rate.num = "25"
default.video.rate.denom = "1"
log.level = "2"
clock.power-of-two-quantum = "true"
link.max-buffers = "64"
mem.warn-mlock = "false"
mem.allow-mlock = "true"
settings.check-quantum = "false"
settings.check-rate = "false"
application.name = "pipewire-media-session"
application.process.binary = "pipewire-media-session"
application.language = "en_IE.UTF-8"
application.process.id = "4137"
application.process.user = "maxi"
application.process.host = "maxi-thinkpad"
core.version = "0.3.59"
core.name = "pipewire-maxi-4137"
pipewire.access = "unrestricted"
Client #32
Driver: PipeWire
Owner Module: 2
Properties:
pipewire.protocol = "protocol-native"
pipewire.sec.pid = "4137"
pipewire.sec.uid = "1000"
pipewire.sec.gid = "1000"
module.id = "2"
object.id = "32"
object.serial = "32"
config.prefix = "media-session.d"
config.name = "media-session.conf"
cpu.max-align = "32"
default.clock.rate = "48000"
default.clock.quantum = "1024"
default.clock.min-quantum = "32"
default.clock.max-quantum = "2048"
default.clock.quantum-limit = "8192"
default.video.width = "640"
default.video.height = "480"
default.video.rate.num = "25"
default.video.rate.denom = "1"
log.level = "2"
clock.power-of-two-quantum = "true"
link.max-buffers = "64"
mem.warn-mlock = "false"
mem.allow-mlock = "true"
settings.check-quantum = "false"
settings.check-rate = "false"
application.name = "pipewire-media-session"
application.process.binary = "pipewire-media-session"
application.language = "en_IE.UTF-8"
application.process.id = "4137"
application.process.user = "maxi"
application.process.host = "maxi-thinkpad"
core.version = "0.3.59"
core.name = "pipewire-maxi-4137"
pipewire.access = "unrestricted"
Client #56
Driver: PipeWire
Owner Module: 2
Properties:
pipewire.protocol = "protocol-native"
pipewire.sec.pid = "4138"
pipewire.sec.uid = "1000"
pipewire.sec.gid = "1000"
module.id = "2"
object.id = "34"
object.serial = "56"
client.api = "pipewire-pulse"
pulse.server.type = "unix"
application.name = "i3status"
application.id = "org.i3wm"
application.version = "2.14-non-git"
application.process.id = "4371"
application.process.user = "maxi"
application.process.host = "maxi-thinkpad"
application.process.binary = "i3status"
application.language = "en_IE.UTF-8"
window.x11.display = ":0"
application.process.machine_id = "fa8590a621e949eaadf00594924e4718"
application.process.session_id = "2"
config.name = "pipewire-pulse.conf"
cpu.max-align = "32"
default.clock.rate = "48000"
default.clock.quantum = "1024"
default.clock.min-quantum = "32"
default.clock.max-quantum = "2048"
default.clock.quantum-limit = "8192"
default.video.width = "640"
default.video.height = "480"
default.video.rate.num = "25"
default.video.rate.denom = "1"
log.level = "2"
clock.power-of-two-quantum = "true"
link.max-buffers = "64"
mem.warn-mlock = "false"
mem.allow-mlock = "true"
settings.check-quantum = "false"
settings.check-rate = "false"
core.version = "0.3.59"
core.name = "pipewire-maxi-4138"
pipewire.access = "unrestricted"
Client #59
Driver: PipeWire
Owner Module: 2
Properties:
pipewire.protocol = "protocol-native"
pipewire.sec.pid = "4427"
pipewire.sec.uid = "1000"
pipewire.sec.gid = "1000"
module.id = "2"
object.id = "40"
object.serial = "59"
pipewire.access.portal.is_portal = "true"
portal.monitor = "Camera"
log.level = "0"
cpu.max-align = "32"
default.clock.rate = "48000"
default.clock.quantum = "1024"
default.clock.min-quantum = "32"
default.clock.max-quantum = "2048"
default.clock.quantum-limit = "8192"
default.video.width = "640"
default.video.height = "480"
default.video.rate.num = "25"
default.video.rate.denom = "1"
clock.power-of-two-quantum = "true"
link.max-buffers = "64"
mem.warn-mlock = "false"
mem.allow-mlock = "true"
settings.check-quantum = "false"
settings.check-rate = "false"
application.name = "xdg-desktop-portal"
application.process.binary = "xdg-desktop-portal"
application.language = "en_IE.UTF-8"
application.process.id = "4427"
application.process.user = "maxi"
application.process.host = "maxi-thinkpad"
window.x11.display = ":0"
core.version = "0.3.59"
core.name = "pipewire-maxi-4427"
pipewire.access = "unrestricted"
Client #106
Driver: PipeWire
Owner Module: 2
Properties:
pipewire.protocol = "protocol-native"
pipewire.sec.pid = "4138"
pipewire.sec.uid = "1000"
pipewire.sec.gid = "1000"
module.id = "2"
object.id = "45"
object.serial = "106"
client.api = "pipewire-pulse"
pulse.server.type = "unix"
application.name = "Firefox"
application.process.id = "4639"
application.process.user = "maxi"
application.process.host = "maxi-thinkpad"
application.process.binary = "firefox-esr"
application.language = "en_IE.UTF-8"
window.x11.display = ":0"
application.process.machine_id = "fa8590a621e949eaadf00594924e4718"
application.process.session_id = "2"
config.name = "pipewire-pulse.conf"
cpu.max-align = "32"
default.clock.rate = "48000"
default.clock.quantum = "1024"
default.clock.min-quantum = "32"
default.clock.max-quantum = "2048"
default.clock.quantum-limit = "8192"
default.video.width = "640"
default.video.height = "480"
default.video.rate.num = "25"
default.video.rate.denom = "1"
log.level = "2"
clock.power-of-two-quantum = "true"
link.max-buffers = "64"
mem.warn-mlock = "false"
mem.allow-mlock = "true"
settings.check-quantum = "false"
settings.check-rate = "false"
core.version = "0.3.59"
core.name = "pipewire-maxi-4138"
pipewire.access = "unrestricted"
Client #117
Driver: PipeWire
Owner Module: 2
Properties:
pipewire.protocol = "protocol-native"
pipewire.sec.pid = "4138"
pipewire.sec.uid = "1000"
pipewire.sec.gid = "1000"
module.id = "2"
object.id = "49"
object.serial = "117"
client.api = "pipewire-pulse"
pulse.server.type = "unix"
application.icon_name = "firefox-esr"
application.name = "Firefox"
application.version = "102.3.0"
application.process.id = "4639"
application.process.user = "maxi"
application.process.host = "maxi-thinkpad"
application.process.binary = "firefox-esr"
application.language = "en_IE.UTF-8"
window.x11.display = ":0"
application.process.machine_id = "fa8590a621e949eaadf00594924e4718"
application.process.session_id = "2"
config.name = "pipewire-pulse.conf"
cpu.max-align = "32"
default.clock.rate = "48000"
default.clock.quantum = "1024"
default.clock.min-quantum = "32"
default.clock.max-quantum = "2048"
default.clock.quantum-limit = "8192"
default.video.width = "640"
default.video.height = "480"
default.video.rate.num = "25"
default.video.rate.denom = "1"
log.level = "2"
clock.power-of-two-quantum = "true"
link.max-buffers = "64"
mem.warn-mlock = "false"
mem.allow-mlock = "true"
settings.check-quantum = "false"
settings.check-rate = "false"
core.version = "0.3.59"
core.name = "pipewire-maxi-4138"
pipewire.access = "unrestricted"
Client #446
Driver: PipeWire
Owner Module: 2
Properties:
pipewire.protocol = "protocol-native"
pipewire.sec.pid = "4138"
pipewire.sec.uid = "1000"
pipewire.sec.gid = "1000"
module.id = "2"
object.id = "50"
object.serial = "446"
client.api = "pipewire-pulse"
pulse.server.type = "unix"
application.process.id = "10929"
application.process.user = "maxi"
application.process.host = "maxi-thinkpad"
application.process.binary = "pactl"
application.name = "pactl"
application.language = "C"
window.x11.display = ":0"
application.process.machine_id = "fa8590a621e949eaadf00594924e4718"
application.process.session_id = "2"
config.name = "pipewire-pulse.conf"
cpu.max-align = "32"
default.clock.rate = "48000"
default.clock.quantum = "1024"
default.clock.min-quantum = "32"
default.clock.max-quantum = "2048"
default.clock.quantum-limit = "8192"
default.video.width = "640"
default.video.height = "480"
default.video.rate.num = "25"
default.video.rate.denom = "1"
log.level = "2"
clock.power-of-two-quantum = "true"
link.max-buffers = "64"
mem.warn-mlock = "false"
mem.allow-mlock = "true"
settings.check-quantum = "false"
settings.check-rate = "false"
core.version = "0.3.59"
core.name = "pipewire-maxi-4138"
pipewire.access = "unrestricted"
-------------- next part --------------
Server String: /run/user/1000/pulse/native
Library Protocol Version: 35
Server Protocol Version: 35
Is Local: yes
Client Index: 447
Tile Size: 65472
User Name: maxi
Host Name: maxi-thinkpad
Server Name: PulseAudio (on PipeWire 0.3.59)
Server Version: 15.0.0
Default Sample Specification: float32le 2ch 48000Hz
Default Channel Map: front-left,front-right
Default Sink: @DEFAULT_SINK@
Default Source: @DEFAULT_SOURCE@
Cookie: 0c45:6d72
More information about the pkg-pulseaudio-devel
mailing list