[Pkg-utopia-maintainers] Bug#568977: Kernel issues
John Talbut
jt at dpets.co.uk
Tue Feb 9 15:03:55 UTC 2010
Micheal
Thanks for looking into this.
You wrote:
>Please try with a default Debian kernel, if you can reproduce the
problem there.
I am reluctant to do this as
>Do you have your network drivers compiled statically into your kernel?
all my drivers are compiled into the kernel and the whole system is set
up around that.
Information you requested below.
John
dmesg:
Linux version 2.6.30-20091002 (2.6.30) (root at johnwtwind) (gcc version
4.3.4 (Debian 4.3.4-2) ) #1 SMP Fri Oct 2 20:44:41 BST 2009
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
NSC Geode by NSC
Cyrix CyrixInstead
Centaur CentaurHauls
Transmeta GenuineTMx86
Transmeta TransmetaCPU
UMC UMC UMC UMC
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009ec00 (usable)
BIOS-e820: 000000000009ec00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000001f5b2000 (usable)
BIOS-e820: 000000001f5b2000 - 000000001f5d5000 (ACPI NVS)
BIOS-e820: 000000001f5d5000 - 000000001f5e6000 (reserved)
BIOS-e820: 000000001f5e6000 - 000000001f5e9000 (ACPI NVS)
BIOS-e820: 000000001f5e9000 - 000000001f605000 (reserved)
BIOS-e820: 000000001f605000 - 000000001f606000 (ACPI NVS)
BIOS-e820: 000000001f606000 - 000000001f608000 (reserved)
BIOS-e820: 000000001f608000 - 000000001f611000 (ACPI data)
BIOS-e820: 000000001f611000 - 000000001f617000 (ACPI NVS)
BIOS-e820: 000000001f617000 - 000000001f700000 (reserved)
BIOS-e820: 00000000ffb00000 - 00000000ffc00000 (reserved)
BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
DMI 2.4 present.
AMI BIOS detected: BIOS may corrupt low RAM, working around it.
e820 update range: 0000000000000000 - 0000000000010000 (usable) ==>
(reserved)
last_pfn = 0x1f5b2 max_arch_pfn = 0x100000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-DBFFF write-protect
DC000-E7FFF write-through
E8000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 000000000 mask 0E0000000 write-back
1 base 01F700000 mask 0FFF00000 uncachable
2 base 01F800000 mask 0FF800000 uncachable
3 disabled
4 disabled
5 disabled
6 disabled
7 disabled
init_memory_mapping: 0000000000000000-000000001f5b2000
0000000000 - 0000400000 page 4k
0000400000 - 001f400000 page 2M
001f400000 - 001f5b2000 page 4k
kernel direct mapping tables up to 1f5b2000 @ 10000-15000
ACPI: RSDP 000f03c0 00024 (v02 MSI_NB)
ACPI: XSDT 1f60ff10 0005C (v01 MSI_NB MEGABOOK 06222004 MSFT 00010013)
ACPI: FACP 1f5e6c10 000F4 (v04 MSI_NB MEGABOOK 06222004 MSFT 00010013)
ACPI Warning (tbfadt-0370): 32/64 FACS address mismatch in FADT - two
FACS tables! [20090320]
ACPI Warning (tbfadt-0488): 32/64X FACS address mismatch in FADT -
1F611E40/000000001F611D40, using 32 [20090320]
ACPI: DSDT 1f608010 05337 (v01 MSI_NB MEGABOOK 00000000 INTL 20051117)
ACPI: FACS 1f611e40 00040
ACPI: APIC 1f610e90 0005C (v02 MSI_NB MEGABOOK 06222004 MSFT 00010013)
ACPI: MCFG 1f615c90 0003C (v01 MSI_NB MEGABOOK 06222004 MSFT 00000097)
ACPI: SLIC 1f612c10 00176 (v01 MSI_NB MEGABOOK 06222004 MSFT 00000097)
ACPI: SSDT 1f605510 004CE (v02 PmRef CpuPm 00003000 INTL 20051117)
ACPI: SSDT 1f5e8a10 00232 (v02 PmRef Cpu0Tst 00003000 INTL 20051117)
ACPI: SSDT 1f611a10 000A0 (v02 PmRef Cpu1Tst 00003000 INTL 20051117)
ACPI: Local APIC address 0xfee00000
0MB HIGHMEM available.
501MB LOWMEM available.
mapped low ram: 0 - 1f5b2000
low ram: 0 - 1f5b2000
node 0 low ram: 00000000 - 1f5b2000
node 0 bootmap 00011000 - 00014eb8
(8 early reservations) ==> bootmem [0000000000 - 001f5b2000]
#0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 -
0000001000]
#1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 -
0000002000]
#2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 -
0000007000]
#3 [0000100000 - 000090bf60] TEXT DATA BSS ==> [0000100000 -
000090bf60]
#4 [000009ec00 - 0000100000] BIOS reserved ==> [000009ec00 -
0000100000]
#5 [000090c000 - 000090f1cc] BRK ==> [000090c000 -
000090f1cc]
#6 [0000010000 - 0000011000] PGTABLE ==> [0000010000 -
0000011000]
#7 [0000011000 - 0000015000] BOOTMAP ==> [0000011000 -
0000015000]
Zone PFN ranges:
DMA 0x00000010 -> 0x00001000
Normal 0x00001000 -> 0x0001f5b2
HighMem 0x0001f5b2 -> 0x0001f5b2
Movable zone start PFN for each node
early_node_map[2] active PFN ranges
0: 0x00000010 -> 0x0000009e
0: 0x00000100 -> 0x0001f5b2
On node 0 totalpages: 128320
free_area_init_node: node 0, pgdat c07f13a0, node_mem_map c1000200
DMA zone: 32 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 3950 pages, LIFO batch:0
Normal zone: 972 pages used for memmap
Normal zone: 123366 pages, LIFO batch:31
Using APIC driver default
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Enabling APIC mode: Flat. Using 1 I/O APICs
Using ACPI (MADT) for SMP configuration information
SMP: Allowing 2 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 24
PM: Registered nosave memory: 000000000009e000 - 000000000009f000
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
Allocating PCI resources starting at 20000000 (gap: 1f700000:e0400000)
NR_CPUS:2 nr_cpumask_bits:2 nr_cpu_ids:2 nr_node_ids:1
PERCPU: Embedded 11 pages at c13f2000, static data 23292 bytes
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 127316
Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.30-20091002
root=/dev/sda1 ro vga=ext snd-hda-intel.model=targa-2ch-dig
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
NR_IRQS:320
PID hash table entries: 2048 (order: 11, 8192 bytes)
Extended CMOS year: 2000
Fast TSC calibration using PIT
Detected 1599.788 MHz processor.
spurious 8259A interrupt: IRQ7.
Console: colour VGA+ 80x25
console [tty0] enabled
Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Initializing HighMem for node 0 (00000000:00000000)
Memory: 500192k/513736k available (4645k kernel code, 12940k reserved,
2551k data, 336k init, 0k highmem)
virtual kernel memory layout:
fixmap : 0xfff9d000 - 0xfffff000 ( 392 kB)
pkmap : 0xff800000 - 0xffc00000 (4096 kB)
vmalloc : 0xdfdb2000 - 0xff7fe000 ( 506 MB)
lowmem : 0xc0000000 - 0xdf5b2000 ( 501 MB)
.init : 0xc0810000 - 0xc0864000 ( 336 kB)
.data : 0xc058958f - 0xc0807448 (2551 kB)
.text : 0xc0100000 - 0xc058958f (4645 kB)
Checking if this processor honours the WP bit even in supervisor mode...Ok.
SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
Calibrating delay loop (skipped), value calculated using timer
frequency.. 3199.57 BogoMIPS (lpj=6399152)
Mount-cache hash table entries: 512
CPU: L1 I cache: 32K, L1 D cache: 24K
CPU: L2 cache: 512K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
using mwait in idle threads.
Checking 'hlt' instruction... OK.
ACPI: Core revision 20090320
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
CPU0: Intel(R) Atom(TM) CPU N270 @ 1.60GHz stepping 02
Booting processor 1 APIC 0x1 ip 0x6000
Initializing CPU#1
Calibrating delay using timer specific routine.. 3200.18 BogoMIPS
(lpj=6400366)
CPU: L1 I cache: 32K, L1 D cache: 24K
CPU: L2 cache: 512K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#1.
CPU1: Intel(R) Atom(TM) CPU N270 @ 1.60GHz stepping 02
checking TSC synchronization [CPU#0 -> CPU#1]: passed.
Brought up 2 CPUs
Total of 2 processors activated (6399.75 BogoMIPS).
CPU0 attaching sched-domain:
domain 0: span 0-1 level SIBLING
groups: 0 1
CPU1 attaching sched-domain:
domain 0: span 0-1 level SIBLING
groups: 1 0
net_namespace: 992 bytes
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
PCI: Not using MMCONFIG.
PCI: Using configuration type 1 for base access
bio: create slab <bio-0> at 0
ACPI: EC: Look up EC in DSDT
ACPI: BIOS _OSI(Linux) query ignored
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
PCI: MCFG area at e0000000 reserved in ACPI motherboard resources
PCI: Using MMCONFIG for extended config space
ACPI: EC: non-query interrupt received, switching to interrupt mode
ACPI: EC: GPE storm detected, transactions will use polling mode
ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
ACPI: EC: driver started in poll mode
ACPI: No dock devices found.
ACPI: PCI Root Bridge [PCI0] (0000:00)
pci 0000:00:02.0: reg 10 32bit mmio: [0xdfe80000-0xdfefffff]
pci 0000:00:02.0: reg 14 io port: [0xd0f0-0xd0f7]
pci 0000:00:02.0: reg 18 32bit mmio: [0xc0000000-0xcfffffff]
pci 0000:00:02.0: reg 1c 32bit mmio: [0xdff00000-0xdff3ffff]
pci 0000:00:02.1: reg 10 32bit mmio: [0xdfe00000-0xdfe7ffff]
pci 0000:00:1b.0: reg 10 64bit mmio: [0xffe00000-0xffe03fff]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: PME# disabled
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: PME# disabled
pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.1: PME# disabled
pci 0000:00:1d.0: reg 20 io port: [0xd080-0xd09f]
pci 0000:00:1d.1: reg 20 io port: [0xd060-0xd07f]
pci 0000:00:1d.2: reg 20 io port: [0xd040-0xd05f]
pci 0000:00:1d.3: reg 20 io port: [0xd020-0xd03f]
pci 0000:00:1d.7: reg 10 32bit mmio: [0xdff40000-0xdff403ff]
pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.7: PME# disabled
pci 0000:00:1f.0: Force enabled HPET at 0xfed03000
pci 0000:00:1f.0: quirk: region 0400-047f claimed by ICH6 ACPI/GPIO/TCO
pci 0000:00:1f.0: quirk: region 0500-053f claimed by ICH6 GPIO
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 004c (mask 0007)
pci 0000:00:1f.2: reg 10 io port: [0xd0e0-0xd0e7]
pci 0000:00:1f.2: reg 14 io port: [0xd0d0-0xd0d3]
pci 0000:00:1f.2: reg 18 io port: [0xd0c0-0xd0c7]
pci 0000:00:1f.2: reg 1c io port: [0xd0b0-0xd0b3]
pci 0000:00:1f.2: reg 20 io port: [0xd0a0-0xd0af]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.2: PME# disabled
pci 0000:01:00.0: reg 10 io port: [0xc000-0xc0ff]
pci 0000:01:00.0: reg 18 64bit mmio: [0xffd10000-0xffd10fff]
pci 0000:01:00.0: reg 20 64bit mmio: [0xffd00000-0xffd0ffff]
pci 0000:01:00.0: reg 30 32bit mmio: [0xdfd00000-0xdfd0ffff]
pci 0000:01:00.0: supports D1 D2
pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:01:00.0: PME# disabled
pci 0000:00:1c.0: bridge io port: [0xc000-0xcfff]
pci 0000:00:1c.0: bridge 32bit mmio: [0xdfd00000-0xdfdfffff]
pci 0000:00:1c.0: bridge 64bit mmio pref: [0xffd00000-0xffdfffff]
pci 0000:02:00.0: reg 10 io port: [0xb000-0xb0ff]
pci 0000:02:00.0: reg 14 32bit mmio: [0xdfc00000-0xdfc03fff]
pci 0000:02:00.0: supports D1 D2
pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:02:00.0: PME# disabled
pci 0000:00:1c.1: bridge io port: [0xb000-0xbfff]
pci 0000:00:1c.1: bridge 32bit mmio: [0xdfc00000-0xdfcfffff]
pci 0000:00:1e.0: transparent bridge
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P5._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 *7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0,
disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0,
disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0,
disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 7 10 11 12 14 15)
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
ACPI: WMI: Mapper loaded
PCI: Using ACPI for IRQ routing
Bluetooth: Core ver 2.15
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
cfg80211: Calling CRDA to update world regulatory domain
hpet clockevent registered
HPET: 3 timers in total, 0 timers will be used for per-cpu timer
hpet0: at MMIO 0xfed03000, IRQs 2, 8, 0
hpet0: 3 comparators, 64-bit 14.318180 MHz counter
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 11 devices
ACPI: ACPI bus type pnp unregistered
system 00:01: iomem range 0xfed14000-0xfed17fff has been reserved
system 00:01: iomem range 0xfed19000-0xfed19fff has been reserved
system 00:01: iomem range 0xfed18000-0xfed18fff has been reserved
system 00:01: iomem range 0xe0000000-0xefffffff has been reserved
system 00:05: ioport range 0x4d0-0x4d1 has been reserved
system 00:09: ioport range 0x400-0x47f has been reserved
system 00:09: ioport range 0x1180-0x119f has been reserved
system 00:09: ioport range 0x500-0x53f has been reserved
system 00:09: iomem range 0xfec00000-0xfec00fff could not be reserved
system 00:09: iomem range 0xfee00000-0xfee00fff has been reserved
system 00:09: iomem range 0xfed20000-0xfed23fff has been reserved
system 00:09: iomem range 0xffb00000-0xffbfffff has been reserved
system 00:09: iomem range 0xfc800400-0xfc800fff has been reserved
pci 0000:00:1c.0: PCI bridge, secondary bus 0000:01
pci 0000:00:1c.0: IO window: 0xc000-0xcfff
pci 0000:00:1c.0: MEM window: 0xdfd00000-0xdfdfffff
pci 0000:00:1c.0: PREFETCH window: 0x000000ffd00000-0x000000ffdfffff
pci 0000:00:1c.1: PCI bridge, secondary bus 0000:02
pci 0000:00:1c.1: IO window: 0xb000-0xbfff
pci 0000:00:1c.1: MEM window: 0xdfc00000-0xdfcfffff
pci 0000:00:1c.1: PREFETCH window: disabled
pci 0000:00:1e.0: PCI bridge, secondary bus 0000:03
pci 0000:00:1e.0: IO window: disabled
pci 0000:00:1e.0: MEM window: disabled
pci 0000:00:1e.0: PREFETCH window: disabled
pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:1c.0: setting latency timer to 64
pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
pci 0000:00:1c.1: setting latency timer to 64
pci 0000:00:1e.0: setting latency timer to 64
pci_bus 0000:00: resource 0 io: [0x00-0xffff]
pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
pci_bus 0000:01: resource 0 io: [0xc000-0xcfff]
pci_bus 0000:01: resource 1 mem: [0xdfd00000-0xdfdfffff]
pci_bus 0000:01: resource 2 pref mem [0xffd00000-0xffdfffff]
pci_bus 0000:02: resource 0 io: [0xb000-0xbfff]
pci_bus 0000:02: resource 1 mem: [0xdfc00000-0xdfcfffff]
pci_bus 0000:03: resource 3 io: [0x00-0xffff]
pci_bus 0000:03: resource 4 mem: [0x000000-0xffffffff]
NET: Registered protocol family 2
IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
TCP established hash table entries: 16384 (order: 5, 131072 bytes)
TCP bind hash table entries: 16384 (order: 5, 131072 bytes)
TCP: Hash tables configured (established 16384 bind 16384)
TCP reno registered
NET: Registered protocol family 1
Machine check exception polling timer started.
Microcode Update Driver: v2.00 <tigran at aivazian.fsnet.co.uk>, Peter Oruba
HugeTLB registered 4 MB page size, pre-allocated 0 pages
Installing knfsd (copyright (C) 1996 okir at monad.swb.de).
NTFS driver 2.1.29 [Flags: R/W].
fuse init (API version 7.11)
msgmni has been set to 977
alg: No test for stdrng (krng)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
pci 0000:00:02.0: Boot video device
pcieport-driver 0000:00:1c.0: irq 24 for MSI/MSI-X
pcieport-driver 0000:00:1c.0: setting latency timer to 64
pcieport-driver 0000:00:1c.1: irq 25 for MSI/MSI-X
pcieport-driver 0000:00:1c.1: setting latency timer to 64
ACPI: AC Adapter [ADP1] (on-line)
input: Power Button as /class/input/input0
ACPI: Power Button [PWRF]
input: Lid Switch as /class/input/input1
ACPI: Lid Switch [LID0]
input: Power Button as /class/input/input2
ACPI: Power Button [PWRB]
input: Sleep Button as /class/input/input3
ACPI: Sleep Button [SLPB]
acpi device:1c: registered as cooling_device0
input: Video Bus as /class/input/input4
ACPI: Video Device [IGD] (multi-head: yes rom: no post: no)
ACPI: SSDT 1f5e8c90 00253 (v02 PmRef Cpu0Ist 00003000 INTL 20051117)
ACPI: SSDT 1f5e7690 00653 (v02 PmRef Cpu0Cst 00003001 INTL 20051117)
ACPI Warning (processor_throttling-0843): Invalid throttling state,
reset [20090320]
Monitor-Mwait will be used to enter C-1 state
Monitor-Mwait will be used to enter C-2 state
Monitor-Mwait will be used to enter C-3 state
Marking TSC unstable due to TSC halts in idle
ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
processor ACPI_CPU:00: registered as cooling_device1
ACPI: Processor [CPU0] (supports 8 throttling states)
ACPI: SSDT 1f5e8f10 000D0 (v02 PmRef Cpu1Ist 00003000 INTL 20051117)
ACPI: SSDT 1f611b10 00083 (v02 PmRef Cpu1Cst 00003000 INTL 20051117)
Switched to high resolution mode on CPU 0
ACPI Warning (processor_throttling-0843): Invalid throttling state,
reset [20090320]
ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
processor ACPI_CPU:01: registered as cooling_device2
ACPI: Processor [CPU1] (supports 8 throttling states)
Switched to high resolution mode on CPU 1
thermal LNXTHERM:01: registered as thermal_zone0
ACPI: Thermal Zone [THRM] (31 C)
sonypi: Sony Programmable I/O Controller Driver v1.26.
Real Time Clock Driver v1.12b
Non-volatile memory driver v1.3
intel_rng: FWH not detected
Linux agpgart interface v0.103
agpgart-intel 0000:00:00.0: Intel 945GME Chipset
agpgart-intel 0000:00:00.0: detected 7932K stolen memory
agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xc0000000
[drm] Initialized drm 1.1.0 20060810
pci 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:02.0: setting latency timer to 64
[drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
intelfb: Framebuffer driver for Intel(R)
830M/845G/852GM/855GM/865G/915G/915GM/945G/945GM/945GME/965G/965GM chipsets
intelfb: Version 0.9.6
intelfb: 00:02.0: Intel(R) 945GME, aperture size 256MB, stolen memory 7932kB
intelfb: Non-CRT device is enabled ( LVDS port ). Disabling mode switching.
intelfb: Video mode must be programmed at boot time.
Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
loop: module loaded
input: Macintosh mouse button emulation as /class/input/input5
Uniform Multi-Platform E-IDE driver
ide-gd driver 1.18
Driver 'sd' needs updating - please use bus_type methods
Driver 'sr' needs updating - please use bus_type methods
ata_piix 0000:00:1f.2: version 2.13
ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ]
ata_piix 0000:00:1f.2: setting latency timer to 64
scsi0 : ata_piix
scsi1 : ata_piix
ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xd0a0 irq 14
ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xd0a8 irq 15
PPP generic driver version 2.4.2
PPP Deflate Compression module registered
PPP BSD Compression module registered
PPP MPPE Compression module registered
NET: Registered protocol family 24
PPPoL2TP kernel driver, V1.0
SLIP: version 0.8.4-NET3.019-NEWTTY (dynamic channels, max=256).
CSLIP: code copyright 1989 Regents of the University of California.
SLIP linefill/keepalive option.
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
r8169 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
r8169 0000:01:00.0: setting latency timer to 64
r8169 0000:01:00.0: irq 26 for MSI/MSI-X
eth0: RTL8102e at 0xdfdfe000, 00:21:85:4a:93:58, XID 34a00000 IRQ 26
console [netcon0] enabled
netconsole: network logging started
Fusion MPT base driver 3.04.07
Copyright (c) 1999-2008 LSI Corporation
Fusion MPT SPI Host driver 3.04.07
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
ehci_hcd 0000:00:1d.7: setting latency timer to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1d.7: debug port 1
ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
ehci_hcd 0000:00:1d.7: irq 23, io mem 0xdff40000
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 8 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
uhci_hcd 0000:00:1d.0: setting latency timer to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000d080
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
uhci_hcd 0000:00:1d.1: setting latency timer to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000d060
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
uhci_hcd 0000:00:1d.2: setting latency timer to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000d040
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16
uhci_hcd 0000:00:1d.3: setting latency timer to 64
uhci_hcd 0000:00:1d.3: UHCI Host Controller
uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000d020
usb usb5: configuration #1 chosen from 1 choice
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
usbcore: registered new interface driver usblp
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
usbcore: registered new interface driver usbserial
USB Serial support registered for generic
usbcore: registered new interface driver usbserial_generic
usbserial: USB Serial Driver core
USB Serial support registered for GSM modem (1-port)
usbcore: registered new interface driver option
option: v0.7.2:USB Driver for GSM modems
USB Serial support registered for pl2303
usbcore: registered new interface driver pl2303
pl2303: Prolific PL2303 USB to serial adaptor driver
i8042: PNP detection disabled
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
Linux video capture interface: v2.00
V4L-Driver for Vision CPiA based cameras v1.2.3
Since in-kernel colorspace conversion is not allowed, it is disabled by
default now. Users should fix the applications in case they don't work
without conversion reenabled by setting the 'colorspace_conv' module
parameter to 1
usbcore: registered new interface driver ov511
ov511: v1.64 for Linux 2.5:ov511 USB Camera Driver
sn9c102: V4L2 driver for SN9C1xx PC Camera Controllers v1:1.47pre49
usbcore: registered new interface driver sn9c102
usbcore: registered new interface driver vicam
quickcam_messenger: v0.01:Logitech Quickcam Messenger USB
usbcore: registered new interface driver QCM
vivi-000: V4L2 device registered as /dev/video0
Video Technology Magazine Virtual Video Capture Board ver 0.6.0
successfully loaded.
usbcore: registered new interface driver uvcvideo
USB Video Class driver (v0.1.0)
coretemp: Unknown CPU model 1c
coretemp: Unknown CPU model 1c
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.05
iTCO_wdt: Found a ICH7-M or ICH7-U TCO device (Version=2, TCOBASE=0x0460)
iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised:
dm-devel at redhat.com
Bluetooth: Generic Bluetooth USB driver ver 0.5
usbcore: registered new interface driver btusb
Bluetooth: Generic Bluetooth SDIO driver ver 0.1
cpuidle: using governor ladder
cpuidle: using governor menu
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
usbcore: registered new interface driver usbhid
usbhid: v2.6:USB HID core driver
ieee80211_crypt: registered algorithm 'NULL'
ieee80211_crypt: registered algorithm 'TKIP'
ieee80211_crypt: registered algorithm 'CCMP'
ieee80211_crypt: registered algorithm 'WEP'
Linux kernel driver for RTL8180 / RTL8185 based WLAN cards
Copyright (c) 2004-2005, Andrea Merello
r8180: Initializing module
r8180: Wireless extensions version 22
r8180: Initializing proc filesystem
r8180: Configuring chip resources
r8180 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
r8180 0000:02:00.0: setting latency timer to 64
r8180: Channel plan is 2
Dot11d_Init()
r8180: MAC controller is a RTL8187SE b/g
r8180: This is a PCI NIC
r8180: usValue is 0x100
atkbd.c: Unknown key pressed (translated set 2, code 0xf7 on
isa0060/serio0).
atkbd.c: Use 'setkeycodes e077 <keycode>' to make it known.
atkbd.c: Unknown key released (translated set 2, code 0xf7 on
isa0060/serio0).
atkbd.c: Use 'setkeycodes e077 <keycode>' to make it known.
input: AT Translated Set 2 keyboard as /class/input/input6
r8180: EEPROM version 104
r8180: WW:**PLEASE** REPORT SUCCESSFUL/UNSUCCESSFUL TO Realtek!
r8180: IRQ 17
wlan0 (r8180): not using net_device_ops yet
r8180: Driver probe completed
Advanced Linux Sound Architecture Driver Version 1.0.20.
HDA Intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
HDA Intel 0000:00:1b.0: setting latency timer to 64
ata1.00: ATA-8: WDC WD800BEVT-22ZCT0, 11.01A11, max UDMA/133
ata1.00: 156301488 sectors, multi 16: LBA48 NCQ (depth 0/32)
ALSA device list:
#0: Virtual MIDI Card 1
#1: HDA Intel at 0xffe00000 irq 16
oprofile: using NMI interrupt.
nf_conntrack version 0.5.0 (8027 buckets, 32108 max)
IPv4 over IPv4 tunneling driver
GRE over IPv4 tunneling driver
ip_tables: (C) 2000-2006 Netfilter Core Team
TCP cubic registered
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
tunl0: Disabled Privacy Extensions
IPv6 over IPv4 tunneling driver
ata1.00: configured for UDMA/133
sit0: Disabled Privacy Extensions
NET: Registered protocol family 17
Bridge firewalling registered
Bluetooth: L2CAP ver 2.13
Bluetooth: L2CAP socket layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM ver 1.11
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
Using IPI No-Shortcut mode
registered taskstats version 1
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
usb 1-5: new high speed USB device using ehci_hcd and address 2
Clocksource tsc unstable (delta = -176015106 ns)
usb 1-5: configuration #1 chosen from 1 choice
uvcvideo: Found UVC 1.00 device BisonCam, NB Pro (5986:0141)
input: BisonCam, NB Pro as /class/input/input7
usb 1-6: new high speed USB device using ehci_hcd and address 3
ACPI: Battery Slot [BAT1] (battery present)
scsi 0:0:0:0: Direct-Access ATA WDC WD800BEVT-22 11.0 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors: (80.0 GB/74.5 GiB)
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't
support DPO or FUA
sda: sda1 sda2 < sda5 sda6 sda7 sda8 sda9 >
sd 0:0:0:0: [sda] Attached SCSI disk
input: ImExPS/2 Generic Explorer Mouse as /class/input/input8
usb 1-6: configuration #1 chosen from 1 choice
scsi2 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 3
usb-storage: waiting for device to settle before scanning
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with writeback data mode.
VFS: Mounted root (ext3 filesystem) readonly on device 8:1.
Freeing unused kernel memory: 336k freed
Write protecting the kernel text: 4648k
Write protecting the kernel read-only data: 2048k
scsi 2:0:0:0: Direct-Access Generic- Multi-Card 1.00 PQ: 0
ANSI: 0 CCS
sd 2:0:0:0: Attached scsi generic sg1 type 0
usb-storage: device scan complete
sd 2:0:0:0: [sdb] Attached SCSI removable disk
Adding 1477940k swap on /dev/sda7. Priority:-1 extents:1 across:1477940k
EXT3 FS on sda1, internal journal
kjournald starting. Commit interval 5 seconds
EXT3 FS on sda9, internal journal
EXT3-fs: mounted filesystem with writeback data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on sda8, internal journal
EXT3-fs: mounted filesystem with writeback data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on sda5, internal journal
EXT3-fs: mounted filesystem with writeback data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on sda6, internal journal
EXT3-fs: mounted filesystem with writeback data mode.
lsmod
Module Size Used by
(There are none)
ls -la /sys/class/net/wlan0
total 0
drwxr-xr-x 5 root root 0 2010-02-09 11:17 .
drwxr-xr-x 8 root root 0 2010-02-09 11:17 ..
-r--r--r-- 1 root root 4096 2010-02-09 14:28 address
-r--r--r-- 1 root root 4096 2010-02-09 14:28 addr_len
-r--r--r-- 1 root root 4096 2010-02-09 14:28 broadcast
-r--r--r-- 1 root root 4096 2010-02-09 14:28 carrier
lrwxrwxrwx 1 root root 0 2010-02-09 14:28 device ->
../../../devices/pci0000:00/0000:00:1c.1/0000:02:00.0
-r--r--r-- 1 root root 4096 2010-02-09 14:28 dev_id
-r--r--r-- 1 root root 4096 2010-02-09 14:28 dormant
-r--r--r-- 1 root root 4096 2010-02-09 14:28 features
-rw-r--r-- 1 root root 4096 2010-02-09 14:28 flags
-rw-r--r-- 1 root root 4096 2010-02-09 14:28 ifalias
-r--r--r-- 1 root root 4096 2010-02-09 14:28 ifindex
-r--r--r-- 1 root root 4096 2010-02-09 14:28 iflink
-r--r--r-- 1 root root 4096 2010-02-09 14:28 link_mode
-rw-r--r-- 1 root root 4096 2010-02-09 14:28 mtu
-r--r--r-- 1 root root 4096 2010-02-09 14:28 operstate
drwxr-xr-x 2 root root 0 2010-02-09 14:28 power
drwxr-xr-x 2 root root 0 2010-02-09 14:28 statistics
lrwxrwxrwx 1 root root 0 2010-02-09 14:59 subsystem -> ../../net
-rw-r--r-- 1 root root 4096 2010-02-09 14:28 tx_queue_len
-r--r--r-- 1 root root 4096 2010-02-09 14:59 type
-rw-r--r-- 1 root root 4096 2010-02-09 14:59 uevent
drwxr-xr-x 2 root root 0 2010-02-09 14:28 wireless
ls -la /sys/class/net/eth0
total 0
drwxr-xr-x 4 root root 0 2010-02-09 14:11 .
drwxr-xr-x 8 root root 0 2010-02-09 11:17 ..
-r--r--r-- 1 root root 4096 2010-02-09 14:28 address
-r--r--r-- 1 root root 4096 2010-02-09 14:28 addr_len
-r--r--r-- 1 root root 4096 2010-02-09 14:28 broadcast
-r--r--r-- 1 root root 4096 2010-02-09 14:28 carrier
lrwxrwxrwx 1 root root 0 2010-02-09 14:28 device ->
../../../devices/pci0000:00/0000:00:1c.0/0000:01:00.0
-r--r--r-- 1 root root 4096 2010-02-09 14:28 dev_id
-r--r--r-- 1 root root 4096 2010-02-09 14:28 dormant
-r--r--r-- 1 root root 4096 2010-02-09 14:28 features
-rw-r--r-- 1 root root 4096 2010-02-09 14:28 flags
-rw-r--r-- 1 root root 4096 2010-02-09 14:28 ifalias
-r--r--r-- 1 root root 4096 2010-02-09 14:28 ifindex
-r--r--r-- 1 root root 4096 2010-02-09 14:28 iflink
-r--r--r-- 1 root root 4096 2010-02-09 14:28 link_mode
-rw-r--r-- 1 root root 4096 2010-02-09 14:28 mtu
-r--r--r-- 1 root root 4096 2010-02-09 14:28 operstate
drwxr-xr-x 2 root root 0 2010-02-09 14:28 power
drwxr-xr-x 2 root root 0 2010-02-09 14:28 statistics
lrwxrwxrwx 1 root root 0 2010-02-09 15:01 subsystem -> ../../net
-rw-r--r-- 1 root root 4096 2010-02-09 14:28 tx_queue_len
-r--r--r-- 1 root root 4096 2010-02-09 15:01 type
-rw-r--r-- 1 root root 4096 2010-02-09 15:01 uevent
More information about the Pkg-utopia-maintainers
mailing list