Bug#386052: zaptel-source: Cannot initiate a call to BRI

[Cybaer]

Jens Wilke wrote:
>

Here we are (reloaded vzaphfc with error situation):

> 
> For that case I would like to see the output of:
>  ztcfg -vv

Zaptel Configuration
======================

SPAN 1: CCS/ AMI Build-out: 399-533 feet (DSX-1)

Channel map:

Channel 01: Clear channel (Default) (Slaves: 01)
Channel 02: Clear channel (Default) (Slaves: 02)
Channel 03: D-channel (Default) (Slaves: 03)

3 channels configured.

Changing signalling on channel 1 from Unused to Clear channel
Changing signalling on channel 2 from Unused to Clear channel
Changing signalling on channel 3 from Unused to HDLC with FCS check

> dmesg
> 
vzaphfc: card 0: chan B1 closed as ZTHFC1/0/1.
vzaphfc: card 0: chan B2 closed as ZTHFC1/0/2.
vzaphfc: card 0: chan D closed as ZTHFC1/0/3.
vzaphfc: card 0: shutting down card at f0088000.
vzaphfc: card 0: resetting
ACPI: PCI interrupt for device 0000:00:14.0 disabled
vzaphfc: HFC-S PCI A Zaptel Driver (V1.42) unloaded
Zapata Telephony Interface Unloaded
Zapata Telephony Interface Registered on major 196
Zaptel Version: 1.2.8 Echo Canceller: KB1
vzaphfc: HFC-S PCI A Zaptel Driver (V1.42) loading
PCI: Enabling device 0000:00:14.0 (0000 -> 0003)
ACPI: PCI Interrupt 0000:00:14.0[A] -> Link [LNKB] -> GSI 10 (level,
low) -> IRQ 10
vzaphfc: card 0: registered ZTHFC1/0/1
vzaphfc: card 0: registered ZTHFC1/0/2
vzaphfc: card 0: registered ZTHFC1/0/3
vzaphfc: card 0: resetting
vzaphfc: card 0 configured for TE mode at mem 0xeb001000 (0xf0108000) IRQ 10
Registered tone zone 3 (Netherlands)

fresh machine after restart:

cat /proc/interrupts
           CPU0
  0:      32760          XT-PIC  timer
  2:          0          XT-PIC  cascade
  5:          0          XT-PIC  uhci_hcd:usb1, uhci_hcd:usb2
  7:          0          XT-PIC  parport0
  8:          4          XT-PIC  rtc
  9:          1          XT-PIC  acpi
 10:     389809          XT-PIC  vzaphfc
 11:       1226          XT-PIC  eth0
 12:          0          XT-PIC  VIA686A
 14:       7424          XT-PIC  ide0
NMI:          0
LOC:          0
ERR:          0
MIS:          0

Thomas