[sane-devel] epson 1200 usb hangs

[Karl Heinz Kremer]

--gBBFr7Ir9EOA20Yy
Content-Type: text/plain; charset=us-ascii
Content-Disposition: inline
Content-Transfer-Encoding: quoted-printable

You don't need the vendor and product IDs in modules.conf for any
recent kernel for the 1200... And if you actually add the options
line, you need the 0x prefix, otherwise the values are not recognized.
The 1200 is however already known to the scanner driver, and therefore
the driver recognizes the scanner even if you specify wrong values
in modules.conf.=20

=2E.. at least that's the theory... If it works for you, keep on=20
using it.

Karl Heinz

On Wed, Aug 29, 2001 at 08:23:35PM -0400, Bob wrote:
> Ok, I think part of my problem may have been my own stupidity, but only=
=20
> partly and it still doesn't explain everything.
>=20
> I was getting my instructions from=20
> http://www.freecolormanagement.com/sane/usb_scanner.html
>=20
> and they have a list of vendor and product id's.  0x04b8 and 0x0104=20
> respectively for the perfection.  When I was running modprobe, I was usin=
g=20
> the 0x prefix for the numbers, as they appeared in the table of instructi=
ons.=20
>  And that worked fine earlier.  Today when I tried it, I eliminated the 0=
x=20
> prefix and it worked a lot better.  I had assumed that the 0x prefix was=
=20
> required to indicate that the numbers being passed were hex based.  Plus,=
 it=20
> worked pretty well.  Until it didn't. ;)
>=20
> Tonight it was hanging on me, but when I ran modprobe and removed the 0x=
=20
> part, it worked.  I've been scanning at 600 dpi with no problems.  I have=
n't=20
> tried 750 dpi yet, mainly because 35-40 megs per file is large enough for=
 me=20
> at this time.  When I get the dvd burner, then I'll really make some big=
=20
> pictures. ;)
>=20
> And I've found out that when it does hang, I shouldn't use xkill to kill=
=20
> xsane.  I should shut off the scanner first, wait a few minutes for xsane=
 to=20
> generate an error.  If I kill xsane,  I can't get the scanner back, but i=
f I=20
> shut it off first, I can re-run modprobe and get the scanner back.
>=20
> Thanks to all those people who offered suggestions.  I really appreciated=
 the=20
> feedback.
>=20
> And thanks to the developers for some good software.
>=20
> Bob
> _______________________________________________
> Sane-devel mailing list
> Sane-devel@www.mostang.com
> http://www.mostang.com/mailman/listinfo/sane-devel

--=20
Karl Heinz Kremer                                  khk@khk.net
PGP Key at http://www.freecolormanagement.com/download/khk.asc
EPSON Sane Backend:         http://www.freecolormanagement.com

--gBBFr7Ir9EOA20Yy
Content-Type: application/pgp-signature
Content-Disposition: inline

-----BEGIN PGP SIGNATURE-----
Version: PGP 6.5.8

iQCVAwUBO42eah4KmkKPBVxtAQEcnQP/eKyXKe10qV1EN9HjVPwgbV3HfMiC4F4H
jPHUTcJmVSwwHbzeIMlkLF9UhKABilvg2BiWqxk/nYFtsPEhJDTmVvLXNM6y968m
D5U0D8XOUK17MlKP2ASUzOJ9I3CDeMb+mm6kxlLEg4/c5bxwcXGlHYoaOxazDP77
4M2soQDuuN8=
=Xg/Z
-----END PGP SIGNATURE-----

--gBBFr7Ir9EOA20Yy--