[sane-devel] officejet scanning
Paulo Filipe Canha de Andrade
paulofilipe at netcabo.pt
Sat Nov 10 02:05:22 GMT 2001
Hi!
I have just spent 5 hours getting my officejet r45 (hp all-in-one
printing/scaning) to work in redhat 7.1. Printing is fine!:) But after
installing sane backends and frontends, xsane following the howto I
ended up with this:
[paulinho at Unixuser paulinho]$ scanimage -L
ptalMlcChannelOpen(chan=0x08054A88): error creating socket!
ptalChannelOpen(chan=0x08054A88): provider failed open!
No scanners were identified. If you were expecting something different,
check that the scanner is plugged in, turned on and detected by the
sane-find-scanner tool (if appropriate). Please read the documentation
which came with this software (README, FAQ, manpages).
========================================================================
[paulinho at Unixuser paulinho]$ scanimage -d hp:mlc:par:0
ptalMlcChannelOpen(chan=0x08054A88): error creating socket!
ptalChannelOpen(chan=0x08054A88): provider failed open!
ptalMlcChannelOpen(chan=0x08054A88): error creating socket!
ptalChannelOpen(chan=0x08054A88): provider failed open!
scanimage: open of device hp:mlc:par:0 failed: Error during device I/O
I have double checked all the steps in the howto, and i would reaaly
apreciate any help because it seems that i'm realy close.
Thankyou for your time,
--
Paulo Filipe Canha de Andrade
mailto:paulofilipe at netcabo.pt
More information about the sane-devel
mailing list