[sane-devel] Problems with Mustek MFS-06000CX / MFS-06000CZ

rayman towalis superman at bigfoot.de
Mon Nov 12 20:35:18 GMT 2001


hello everybody,

my scanner is labled Mustek MFS-06000CX but the scsi-controller
detects him as a MFS-06000CZ. anyway, sane-find-scanner didnt
detects anything. please help me.

here are some outputs of system files:

cat /proc/scsi/scsi 
Attached devices: 
Host: scsi0 Channel: 00 Id: 01 Lun: 00
  Vendor: MUSTEK   Model: MSF-06000CZ      Rev: 4.00
  Type:   Scanner                          ANSI SCSI revision: ffffffff
Host: scsi0 Channel: 00 Id: 02 Lun: 00
  Vendor: TEAC     Model: CD-ROM CD-532S   Rev: 3.0A
  Type:   CD-ROM                           ANSI SCSI revision: 02
Host: scsi0 Channel: 00 Id: 03 Lun: 00
  Vendor: Traxdata Model: CDR4120          Rev: 5.0J
  Type:   CD-ROM                           ANSI SCSI revision: 02

--------

SCSI subsystem driver Revision: 1.00
PCI: Found IRQ 11 for device 00:11.0
sym53c8xx: at PCI bus 0, device 17, function 0
sym53c8xx: setting PCI_COMMAND_PARITY...(fix-up)
sym53c8xx: 53c875 detected 
sym53c875-0: rev 0x3 on pci bus 0 device 17 function 0 irq 11
sym53c875-0: ID 7, Fast-20, Parity Checking
scsi0 : sym53c8xx-1.7.3a-20010304
  Vendor: MUSTEK  Model: MSF-06000CZ  Rev: 4.00
  Type:   Scanner                            ANSI SCSI revision: 00
  Vendor: TEAC      Model: CD-ROM CD-532S    Rev: 3.0A
  Type:   CD-ROM                             ANSI SCSI revision: 02
  Vendor: Traxdata  Model: CDR4120           Rev: 5.0J
  Type:   CD-ROM                             ANSI SCSI revision: 02
Detected scsi CD-ROM sr0 at scsi0, channel 0, id 2, lun 0
Detected scsi CD-ROM sr1 at scsi0, channel 0, id 3, lun 0
sym53c875-0-<2,*>: FAST-20 SCSI 20.0 MB/s (50.0 ns, offset 16)
sr0: scsi3-mmc drive: 68x/1x dvd-ram cd/rw xa/form2 cdda 
Uniform CD-ROM driver Revision: 3.12
sym53c875-0-<3,*>: FAST-10 SCSI 10.0 MB/s (100.0 ns, offset 15)
sr1: scsi-1 drive
Detected scsi generic sg0 at scsi0, channel 0, id 1, lun 0, type 6

----

as atachment you'll see the errlog from sane-find-scanner .

thanx for help,

rayman

[sanei_debug] Setting debug level of sanei_scsi to 128.
[sanei_debug] Setting debug level of sanei_scsi to 128.
[sanei_scsi] sanei_scsi_find_devices: vendor=(null) model=(null) type=Scanner
	bus=0 chan=0 id=1 lun=0  num=0
[sanei_scsi] lx_chk_id: 0,0  0,0  1,1  0,0
[sanei_scsi] lx_chk_devicename: matched device(direct): /dev/sg0
[sanei_scsi] get_max_buffer_size for /dev/sg0: 131072
[sanei_debug] Setting debug level of sanei_scsi to 128.
[sanei_scsi] sanei_scsi_open: sanei_scsi_max_request_size=131072 bytes
[sanei_scsi] sanei_scsi_open: SG driver version: 30117
[sanei_scsi] sanei_scsi_open_extended: using 131072 bytes as SCSI buffer
[sanei_scsi] trying to enable low level command queueing
[sanei_scsi] sanei_scsi_open: Host adapter queue depth: 2
[sanei_scsi] sanei_scsi_open: SG driver can change buffer size at run time
[sanei_scsi] sanei_scsi_open: low level command queueing enabled
[sanei_scsi] sanei_scsi_open: using new SG header structure
[sanei_scsi] scsi_req_enter: entered 0x804df08
[sanei_scsi] sanei_scsi.issue: 0x804df08
[sanei_scsi] scsi_req_enter: queue_used: 1, queue_max: 2
[sanei_scsi] sanei_scsi_req_wait: waiting for 0x804df08
[sanei_scsi] sanei_scsi.issue: 0x804df08
[sanei_scsi] sanei_scsi_req_wait: read 64 bytes
[sanei_scsi] sanei_scsi_req_wait: SCSI command complained: Success
[sanei_scsi] sense buffer: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[sanei_scsi] target status: 7f host status: 0007 driver status: 0027
[sanei_scsi] scsi_req_enter: entered 0x804df08
[sanei_scsi] sanei_scsi.issue: 0x804df08
[sanei_scsi] scsi_req_enter: queue_used: 1, queue_max: 2
[sanei_scsi] sanei_scsi_req_wait: waiting for 0x804df08
[sanei_scsi] sanei_scsi.issue: 0x804df08
[sanei_scsi] sanei_scsi_req_wait: read 64 bytes
[sanei_scsi] sanei_scsi_req_wait: SCSI command complained: Success
[sanei_scsi] sense buffer: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[sanei_scsi] target status: 7f host status: 0007 driver status: 0027
[sanei_debug] Setting debug level of sanei_scsi to 128.
[sanei_scsi] sanei_scsi_open: SG driver version: 30117
[sanei_scsi] sanei_scsi_open_extended: using 131072 bytes as SCSI buffer
[sanei_scsi] trying to enable low level command queueing
[sanei_scsi] sanei_scsi_open: Host adapter queue depth: 2
[sanei_scsi] sanei_scsi_open: SG driver can change buffer size at run time
[sanei_scsi] sanei_scsi_open: low level command queueing enabled
[sanei_scsi] sanei_scsi_open: using new SG header structure
[sanei_scsi] scsi_req_enter: entered 0x804df08
[sanei_scsi] sanei_scsi.issue: 0x804df08
[sanei_scsi] scsi_req_enter: queue_used: 1, queue_max: 2
[sanei_scsi] sanei_scsi_req_wait: waiting for 0x804df08
[sanei_scsi] sanei_scsi.issue: 0x804df08
[sanei_scsi] sanei_scsi_req_wait: read 64 bytes
[sanei_scsi] sanei_scsi_req_wait: SCSI command complained: Success
[sanei_scsi] sense buffer: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[sanei_scsi] target status: 7f host status: 0007 driver status: 0027
[sanei_scsi] scsi_req_enter: entered 0x804df08
[sanei_scsi] sanei_scsi.issue: 0x804df08
[sanei_scsi] scsi_req_enter: queue_used: 1, queue_max: 2
[sanei_scsi] sanei_scsi_req_wait: waiting for 0x804df08
[sanei_scsi] sanei_scsi.issue: 0x804df08
[sanei_scsi] sanei_scsi_req_wait: read 64 bytes
[sanei_scsi] sanei_scsi_req_wait: SCSI command complained: Success
[sanei_scsi] sense buffer: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[sanei_scsi] target status: 7f host status: 0007 driver status: 0027
[sanei_debug] Setting debug level of sanei_scsi to 128.
[sanei_scsi] sanei_scsi_open: SG driver version: 30117
[sanei_scsi] sanei_scsi_open_extended: using 131072 bytes as SCSI buffer
[sanei_scsi] trying to enable low level command queueing
[sanei_scsi] sanei_scsi_open: Host adapter queue depth: 2
[sanei_scsi] sanei_scsi_open: SG driver can change buffer size at run time
[sanei_scsi] sanei_scsi_open: low level command queueing enabled
[sanei_scsi] sanei_scsi_open: using new SG header structure
[sanei_scsi] scsi_req_enter: entered 0x804df08
[sanei_scsi] sanei_scsi.issue: 0x804df08
[sanei_scsi] scsi_req_enter: queue_used: 1, queue_max: 2
[sanei_scsi] sanei_scsi_req_wait: waiting for 0x804df08
[sanei_scsi] sanei_scsi.issue: 0x804df08
[sanei_scsi] sanei_scsi_req_wait: read 64 bytes
[sanei_scsi] scsi_req_enter: entered 0x804df08
[sanei_scsi] sanei_scsi.issue: 0x804df08
[sanei_scsi] scsi_req_enter: queue_used: 1, queue_max: 2
[sanei_scsi] sanei_scsi_req_wait: waiting for 0x804df08
[sanei_scsi] sanei_scsi.issue: 0x804df08
[sanei_scsi] sanei_scsi_req_wait: read 64 bytes
[sanei_debug] Setting debug level of sanei_scsi to 128.
[sanei_scsi] sanei_scsi_open: SG driver version: 30117
[sanei_scsi] sanei_scsi_open_extended: using 131072 bytes as SCSI buffer
[sanei_scsi] trying to enable low level command queueing
[sanei_scsi] sanei_scsi_open: Host adapter queue depth: 2
[sanei_scsi] sanei_scsi_open: SG driver can change buffer size at run time
[sanei_scsi] sanei_scsi_open: low level command queueing enabled
[sanei_scsi] sanei_scsi_open: using new SG header structure
[sanei_scsi] scsi_req_enter: entered 0x804df08
[sanei_scsi] sanei_scsi.issue: 0x804df08
[sanei_scsi] scsi_req_enter: queue_used: 1, queue_max: 2
[sanei_scsi] sanei_scsi_req_wait: waiting for 0x804df08
[sanei_scsi] sanei_scsi.issue: 0x804df08
[sanei_scsi] sanei_scsi_req_wait: read 64 bytes
[sanei_scsi] scsi_req_enter: entered 0x804df08
[sanei_scsi] sanei_scsi.issue: 0x804df08
[sanei_scsi] scsi_req_enter: queue_used: 1, queue_max: 2
[sanei_scsi] sanei_scsi_req_wait: waiting for 0x804df08
[sanei_scsi] sanei_scsi.issue: 0x804df08
[sanei_scsi] sanei_scsi_req_wait: read 64 bytes
[sanei_debug] Setting debug level of sanei_scsi to 128.
[sanei_scsi] sanei_scsi_open: open of `/dev/sg3' failed: No such device or address
[sanei_debug] Setting debug level of sanei_scsi to 128.
[sanei_scsi] sanei_scsi_open: open of `/dev/sg4' failed: No such device or address
[sanei_debug] Setting debug level of sanei_scsi to 128.
[sanei_scsi] sanei_scsi_open: open of `/dev/sg5' failed: No such device or address
[sanei_debug] Setting debug level of sanei_scsi to 128.
[sanei_scsi] sanei_scsi_open: open of `/dev/sg6' failed: No such device or address
[sanei_debug] Setting debug level of sanei_scsi to 128.
[sanei_scsi] sanei_scsi_open: open of `/dev/sg7' failed: No such device or address
[sanei_debug] Setting debug level of sanei_scsi to 128.
[sanei_scsi] sanei_scsi_open: open of `/dev/sg8' failed: No such device or address
[sanei_debug] Setting debug level of sanei_scsi to 128.
[sanei_scsi] sanei_scsi_open: open of `/dev/sg9' failed: No such device or address
[sanei_debug] Setting debug level of sanei_scsi to 128.
[sanei_scsi] sanei_scsi_open: open of `/dev/sga' failed: No such file or directory
[sanei_debug] Setting debug level of sanei_scsi to 128.
[sanei_scsi] sanei_scsi_open: open of `/dev/sgb' failed: No such file or directory
[sanei_debug] Setting debug level of sanei_scsi to 128.
[sanei_scsi] sanei_scsi_open: open of `/dev/sgc' failed: No such file or directory
[sanei_debug] Setting debug level of sanei_scsi to 128.
[sanei_scsi] sanei_scsi_open: open of `/dev/sgd' failed: No such file or directory
[sanei_debug] Setting debug level of sanei_scsi to 128.
[sanei_scsi] sanei_scsi_open: open of `/dev/sge' failed: No such file or directory
[sanei_debug] Setting debug level of sanei_scsi to 128.
[sanei_scsi] sanei_scsi_open: open of `/dev/sgf' failed: No such file or directory
[sanei_debug] Setting debug level of sanei_scsi to 128.
[sanei_scsi] sanei_scsi_open: open of `/dev/sgg' failed: No such file or directory
[sanei_debug] Setting debug level of sanei_scsi to 128.
[sanei_scsi] sanei_scsi_open: open of `/dev/sgh' failed: No such file or directory
[sanei_debug] Setting debug level of sanei_scsi to 128.
[sanei_scsi] sanei_scsi_open: open of `/dev/sgi' failed: No such file or directory
[sanei_debug] Setting debug level of sanei_scsi to 128.
[sanei_scsi] sanei_scsi_open: open of `/dev/sgj' failed: No such file or directory
[sanei_debug] Setting debug level of sanei_scsi to 128.
[sanei_scsi] sanei_scsi_open: open of `/dev/sgk' failed: No such file or directory
[sanei_debug] Setting debug level of sanei_scsi to 128.
[sanei_scsi] sanei_scsi_open: open of `/dev/sgl' failed: No such file or directory
[sanei_debug] Setting debug level of sanei_scsi to 128.
[sanei_scsi] sanei_scsi_open: open of `/dev/sgm' failed: No such file or directory
[sanei_debug] Setting debug level of sanei_scsi to 128.
[sanei_scsi] sanei_scsi_open: open of `/dev/sgn' failed: No such file or directory
[sanei_debug] Setting debug level of sanei_scsi to 128.
[sanei_scsi] sanei_scsi_open: open of `/dev/sgo' failed: No such file or directory
[sanei_debug] Setting debug level of sanei_scsi to 128.
[sanei_scsi] sanei_scsi_open: open of `/dev/sgp' failed: No such file or directory
[sanei_debug] Setting debug level of sanei_scsi to 128.
[sanei_scsi] sanei_scsi_open: open of `/dev/sgq' failed: No such file or directory
[sanei_debug] Setting debug level of sanei_scsi to 128.
[sanei_scsi] sanei_scsi_open: open of `/dev/sgr' failed: No such file or directory
[sanei_debug] Setting debug level of sanei_scsi to 128.
[sanei_scsi] sanei_scsi_open: open of `/dev/sgs' failed: No such file or directory
[sanei_debug] Setting debug level of sanei_scsi to 128.
[sanei_scsi] sanei_scsi_open: open of `/dev/sgt' failed: No such file or directory
[sanei_debug] Setting debug level of sanei_scsi to 128.
[sanei_scsi] sanei_scsi_open: open of `/dev/sgu' failed: No such file or directory
[sanei_debug] Setting debug level of sanei_scsi to 128.
[sanei_scsi] sanei_scsi_open: open of `/dev/sgv' failed: No such file or directory
[sanei_debug] Setting debug level of sanei_scsi to 128.
[sanei_scsi] sanei_scsi_open: open of `/dev/sgw' failed: No such file or directory
[sanei_debug] Setting debug level of sanei_scsi to 128.
[sanei_scsi] sanei_scsi_open: open of `/dev/sgx' failed: No such file or directory
[sanei_debug] Setting debug level of sanei_scsi to 128.
[sanei_scsi] sanei_scsi_open: open of `/dev/sgy' failed: No such file or directory
[sanei_debug] Setting debug level of sanei_scsi to 128.
[sanei_scsi] sanei_scsi_open: open of `/dev/sgz' failed: No such file or directory
# Note that sane-find-scanner will find any scanner that is connected
# to a SCSI bus.  It will even find scanners that are not supported
# at all by SANE. It won't find a scanner that is connected to a
# parallel, USB or other non-SCSI port.






More information about the sane-devel mailing list