[sane-devel] hp scanjet 7400c scsi-usb

Henning Meier-Geinitz henning@meier-geinitz.de
Sat, 10 Aug 2002 18:21:23 +0200


On Sat, Aug 10, 2002 at 03:46:37PM +0200, raoul.megelas wrote:
> 	I have a hp scanjet 7400c scanner scsi-usb.
> It does not appear in the list of supported scanners by sane-backends.

Hm? http://www.mostang.com/sane/sane-backends.html lists your sacnner
as supported by the avision backend. At least a scanner that is named
"HP 7400".

> in usb mode the scanner is not detected even tiwh -d hp:/dev/ugen1 switch.

You are using FreeBSD? Please read README.freebsd.

I don't think it will work with the hp backend.

> in scsi mode scanimage -L find it like avision scanner.
>  The following command line:
>   scanimage avision:/dev/pass1 gives:

Can't work. Use scanimage -d avision...

>   start i/o error, ane the scanner does not work.
> 	I tried to add the scanner in the hp-device.c .h and hp-scl.h files.
> This compile quite well but with the same result.
> (sane cvs version).
> 	Welcome to any suggestion to solve this problem.
> Thanks in advance.

Probably the avision maintainer can give better advice: Rene Rebe