[sane-devel] Red Hat 8.0 and CanonScan N656U

[Maurizio Tiecher]

Hallo

I ask help for a Scanner Canon N656U on USB door kindly. I have discharged the driver from Healthy, the release 1.0.9 and plustek 0_44_10.

The system is a Red Hat 8.0.

I have compiled first healthy sane-backends in /sr/ local/ src: #./configure, #make, #make install.

I have copied the plustek 0_44_10 and untarred in sane-backends.

I have commanded: #make all, # make install, #make load. 

I have had the following result the command #make load:

/s bin mod probe pt_drv] "exit1

/lib/modules/ 2.4.18-14/misc/pt_drv.o: init module: Success

Hint: insmod errors can be caused by incorrect module parameters, including invalid IO or IRQ parameters.

You may find more information in sys log or the output for dmesg.

/lib/modules/2.4.18-14/misc/ pt_drv.o: insmod /lib/modules/ 2.4.18-14/misc/pt_drv.o failed

/lib/modules/ 2.4.18-14/misc/pt_drv.o:insmod pt_drv failed

make: ***[load] Error 1

I have inducted sane-frontends always in /usr/local/src: #./configure, #make, #make install.

I have tried the command: #sane-find-scanner has had the response:

find USB scanner (vendor= 0x04a9 [Canon] product= 0x2206 [CanonScan] ) at /dev/usb/ scanner0 find USB scanner (vendor= 0x04a9 [Canon] product= 0x2206 [CanonScan] ) at libusb: 001: 003

USB device was detected. This program can't be sure if it's really a scanner. If it is your scanner, it may or may not be supported by SANE. Try scanimage -L and read the backend's manpage.

# scanimage -L:

No scanner were identified. If you were especting something different, check that the scanner is plugged in, turned ou mod detected by the sane-find-scanner toll (if appropriate). Please read the documentation whitch come whit this software /README, FAQ, manpage).

bin# rmmod scanner modprobe scanner vendor= 0x04a9 product= 0x2206

Response:

rmmod: module scanner is not loaded

rmmod: module modprobe is not loaed

rmmod: module scanner is not loaded

rmmod: module vendor= 0x04a9 is not loaded

rmmod: module product= 0x2206

I have tried to alter the line plustek.conf with Emacs inserting the vendor and product of the Canon scanner but.

I have not had no result.

#dmesg

usb.c: registered new driver usbdevfs

usb.c: registered new driver hub

usb-ohci.c: USB OHCI at number 0xcc 849000, IRQ 3

usb-ohci.c: usb-00: 01.2, Silicon Integrated System (SIS) 7001

usb.c: news USB bus registered, assigned bus number 1

usb.c: USB hub found

usb.c: 2 ports detected

usb.c: registered new driver hiddeev

usb.c: registered new driver hid

hid-core.c: v 1.8.1 Andreas Gal, vojtec Pavlich

hid-core.c: USB HID support drivers

hub.c: USB new device connect an bus 1/2, assigned device number 2

usb.c: USB device 2 /vend/prod 0x4a9/0x2206) is not climed by any active driver

pt_drv: driver version o.44_11

pt_drv: no device (s) detected, (-9020)

pt_drv: driver version o.44_11

pt_drv: no device (s) detected, (-9020)

In /proc/bus/usb/devices the scanner has seen evenly.

I have removed the # in the line dll.conf in front of the lines for Canon scanner, but it has not changed nothing. 

Could anybody help me?

Thank you Maurizio

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://alioth-lists.debian.net/pipermail/sane-devel/attachments/20021201/727ecab5/attachment.htm>