[sane-devel] Epson Perfection 1650

[Duncan Haldane]

On 12-Feb-2002 Karl Heinz Kremer wrote:
> 
> To answer your question about the scanner capabilities: You can use 48bit
> color,
> the backend however calls this 16bit (this is per color channel, so with RGB
> you end up with 3*16 bits). I don't have a 1650, but from the command set and
> the debug output I've seen, you should also be able to select up to 3200dpi -
> not that this would give you better scans, but you should be able to select
> it. 

Hmmm, 
both xscanimage and xsane show a list of  possible resolutions
between 50 and 2400 that stretch vertically from the top to the bottom of the
screen.   I havent been able to shrink  the size of the gui to see if in fact
resolutions beyond 2400 are allowed, but are inaccessible because they are
outside the visible screen, or if they not present.
The resolutions listed are:
 50  60  72  75  80  90 100 120 133 144 150 160 175 180 200
216 240 266 200 320 350 360 400 480 600 720 800 900 1200 1600 1800 2400

scanimage --help reports this list plus 3200dpi, so I suppose it is just a gui
problem when the list of available resolutions is too long to fit on the screen.

Maybe the list should be scrollable?  Or maybe I need to discover how to shrink
the size of the gui ?.


Duncan
----------------------------------
E-Mail: Duncan Haldane <f.duncan.m.haldane at worldnet.att.net>
Date: 12-Feb-2002
Time: 23:47:38

This message was sent by XFMail
----------------------------------