[sane-devel] Support for HP 7490?

Rene Rebe rene.rebe at gmx.net
Fri Jan 4 04:36:07 GMT 2002


Hello.

Your scanner might be possibly supported in a future version of the
Avision backend. At least the "ScanJet 5300C", "ScanJet 5370C" and
"scanjet 7400c" might be.

These scanners are Avision OEM scanners, using the Avision SCSI
protokol. I mainly waiting for HP to send me a test scanner (they try
to do this since the last CeBIT in 2001 ...) - because debugging
system hangs and exchanging debug values again and again (including
several days of eMail delay) isn't that funny.

Maybe some eMails to <juergen_probst at hp.com> or your countries HP
company - telling them that there is public demand for Linux support -
might help.

The hack-in-progress can be found at:

http://www.rocklinux.org/people/rene/sane/

From: Tony Dalton - SunUK IT/OPS <Tony.Dalton at Sun.COM>
Subject: [sane-devel] Support for HP 7490?
Date: Thu, 3 Jan 2002 11:45:02 +0000 (GMT)

> Hi,
> 
> I have an HP7490 and have installed sane back and front ends, but it looks like 
> the software isn't seeing the scanner:
> 
> sane-find-scanner: found SCSI scanner "hp scanjet 7400c 0.8M" at device 
> /dev/scg0c
> 
> root[sh]@media-gmp3-lab# ./xscanimage
> [xscanimage] No scanners were identified.
> 
> Am I doing something wrong or is this something to do with HP changing the scsi 
> interface on later models? hp.conf is as follows:
> 
> root[sh]@media-gmp3-lab# more hp.conf
> scsi HP
> /dev/scg0c
> 
> I just tried appending the 'c' so it'll look at the correct target, but it still 
> didn't work. I've also tried xvscan to no avail and am running out of ideas, any 
> help would be greatly appreciated.
> 
> Thanks,
> 
> Tony
> 
> _______________________________________________
> Sane-devel mailing list
> Sane-devel at www.mostang.com
> http://www.mostang.com/mailman/listinfo/sane-devel
> 



More information about the sane-devel mailing list