[sane-devel] Help with Epson1650 USB under SuSE 7.2

[Karl Heinz Kremer]

Steve,

did you add the ID for the Perfection1650 to the file /etc/usbmgr/usbmgr.conf
as I've described it on my web page (http://www.khk.net/sane/suse71.html) ?
Even though this was written for SuSE 7.1, it also applies to 7.2

Karl Heinz


On Mon, Jan 07, 2002 at 10:33:36PM +0000, Steve Westwood wrote:
> Hi. I am trying to get my Epson Perfection 1650 USB scanner working. I have 
> done everything I can find on the support sites, and RTFM till I'm crosseyed, 
> but so far no joy. Can anyone help? TIA.
> 
> The scanner is seen on the bus, but xsane reports "no devices available". 
> Below are details of the relevant files. I have tried 
> modprobe scanner vendor=0x04b8 product=0x0110 but still get a "Driver=(none)" 
> error.
> 
> /proc/bus/usb/devices
> T:  Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#=  1 Spd=12  MxCh= 4
> B:  Alloc= 11/900 us ( 1%), #Int=  1, #Iso=  0
> D:  Ver= 1.10 Cls=09(hub  ) Sub=00 Prot=00 MxPS= 8 #Cfgs=  1
> P:  Vendor=0000 ProdID=0000 Rev= 0.00
> S:  Product=USB OHCI Root Hub
> S:  SerialNumber=d921d000
> C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr=  0mA
> I:  If#= 0 Alt= 0 #EPs= 1 Cls=09(hub  ) Sub=00 Prot=00 Driver=hub
> E:  Ad=81(I) Atr=03(Int.) MxPS=   2 Ivl=255ms
> T:  Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 20 Spd=12  MxCh= 0
> D:  Ver= 1.10 Cls=ff(vend.) Sub=ff Prot=ff MxPS= 8 #Cfgs=  1
> P:  Vendor=04b8 ProdID=0110 Rev= 3.02
> S:  Manufacturer=EPSON
> S:  Product=EPSON Scanner
> C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr=  2mA
> I:  If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
> E:  Ad=01(O) Atr=02(Bulk) MxPS=  64 Ivl=  0ms
> E:  Ad=82(I) Atr=02(Bulk) MxPS=  64 Ivl=  0ms
> T:  Bus=01 Lev=01 Prnt=01 Port=01 Cnt=02 Dev#= 17 Spd=12  MxCh= 4
> D:  Ver= 1.00 Cls=09(hub  ) Sub=00 Prot=00 MxPS= 8 #Cfgs=  1
> P:  Vendor=050f ProdID=0003 Rev= 1.00
> C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=100mA
> I:  If#= 0 Alt= 0 #EPs= 1 Cls=09(hub  ) Sub=00 Prot=00 Driver=hub
> E:  Ad=81(I) Atr=03(Int.) MxPS=   1 Ivl=255ms
> 
> --------------------------------------------------------------------------------------------------
> /proc/bus/usb/drivers
>          usbdevfs
>          hub
>          hid
>  48- 63: usbscanner
> 
> ---------------------------------------------------------------------------------------------------
> /etc/sane.d/epson.conf
> # here are examples for how to configure the EPSON backend
> scsi EPSON
> #   option color_correction   1 2 3 4 5 6 7 8 9
> #
> #pio 0x278
> #pio 0x378
> #pio 0x3BC
> #scsi EPSON
> # /dev/scanner
> usb /dev/usb/scanner0
> #usb /dev/usb/test0
> 
> ----------------------------------------------------------------------------------------------------
> relevant part of /etc/usbmgr/usbmgr.conf
> # Perfection 1650Photo [Epson]
> vendor 0x04b8 product 0x0110 module scanner
> 
> -----------------------------------------------------------------------------------------------------
> /etc/usbmgr/preload.conf
> hid
> mousedev
> scanner
> 
> -----------------------------------------------------------------------------------------------------
> /etc/usbmgr/vendor/o4b8/0110/module
> scanner
> 
> -----------------------------------------------------------------------------------------------------
> 
> /dev/usb/scanner0 exists with permissions 0666
> /dev/usb/scanner and /dev/scanner exist as symlinks to /dev/usb/scanner0
> 
> What else do I need to do?
> 
> Many thanks,
> 
> Steve Westwood.
> _______________________________________________
> Sane-devel mailing list
> Sane-devel at www.mostang.com
> http://www.mostang.com/mailman/listinfo/sane-devel

-- 
Karl Heinz Kremer                                  khk at khk.net
PGP Key at                 http://www.khk.net/download/khk.asc
EPSON Sane Backend:                         http://www.khk.net
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 292 bytes
Desc: not available
URL: <http://alioth-lists.debian.net/pipermail/sane-devel/attachments/20020107/5eee1bff/attachment.sig>