[sane-devel] Upgrading to 1.0.7 - snapscan E20 not detected by scanimage

[Sylvain Petreolle]

Hi,

Upgrading to last version of sane,
my Snapscan e20 USB scanner is no longer detected by
scanimage.

sane-find-scanner found it:
sane-find-scanner: found USB scanner (vendor = 0x06bd,
product = 0x2091) at device /dev/usb/scanner0

It's listed in USB devices :
T:  Bus=02 Lev=01 Prnt=01 Port=01 Cnt=02 Dev#=  3
Spd=12  MxCh= 0
D:  Ver= 1.00 Cls=ff(vend.) Sub=ff Prot=ff MxPS= 8
#Cfgs=  1
P:  Vendor=06bd ProdID=2091 Rev= 1.00
S:  Manufacturer=AGFA
S:  Product=SNAPSCAN

What should I do to identify the problem ?
C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr=100mA
I:  If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff
Driver=usbscanner
E:  Ad=81(I) Atr=02(Bulk) MxPS=  64 Ivl=  0ms
E:  Ad=02(O) Atr=02(Bulk) MxPS=   8 Ivl=  0ms
E:  Ad=83(I) Atr=03(Int.) MxPS=   8 Ivl= 16ms

I use a RedHat 7.2 distro, latest kernel available
(2.4.9-13)


___________________________________________________________
Do You Yahoo!? -- Une adresse @yahoo.fr gratuite et en français !
Yahoo! Courrier : http://courrier.yahoo.fr