[sane-devel] Re: Mustek 600 III EP Plus problems
Mon, 3 Jun 2002 08:20:01 -0700 (PDT)
I can second the thing.
I got the same scanner and RH 7.3 and i have tried to
change port number
cat /proc/ioports indicates parport0 at 0378-037a
i used it in the mustek_pp.conf file and this is a no
And no this is not while trying to print : )
Reminder this is an upgraded sane pack released by RH
a few days ago.
Before and after the upgrade it does the same.
On Mon, 3 Jun 2002 11:40:23 +0200
Jochen Eisinger <email@example.com> wrote:
> to which port is your scanner connected? Or are you
using a printer
> while trying to scan? You could try to unload the
parport modules (or at
> least make sure they do not lock the port
> -- jochen
> [Kristen Doyle]
> > I am trying to get it working on an linux box when
i try though the
> > following comes up
> > Linux 2.4.18
> > [sanei_debug] Setting debug level of mustek_pp to
> > [mustek_pp] init: SANE v1.0.8, backend
> > [mustek_pp] I wouldn't let myself be root if I
> > [mustek_pp] init: option niceload
> > [mustek_pp] init: trying port `0x378'
> > [mustek_pp] attach: couldn't attach to `0x378'
> > [mustek_pp] attach(v1.0.9-devel): line 2538: debug
> > [mustek_pp] init: couldn't attach to port `0x378'
> > [mustek_pp] init: 'name' only allowed after 'port'
> > [mustek_pp] init: 'vendor' only allowed after
> > [mustek_pp] init: option wait-lamp 15
> > [mustek_pp] init: setting global option wait-lamp
> > [mustek_pp] init: option strip-height 16
> > [mustek_pp] init: setting global option
strip-height to 16
> > No scanners were identified. If you were expecting
> > different, check that the scanner is plugged in,
turned on and
> > detected by the sane-find-scanner tool (if
appropriate). Please read
> > the documentation which came with this software
> > manpages).[mustek_pp] exit: (...)
> > comp3:/usr/local/etc/sane.d#
> ...and I doubt complaining to the author will get
> anything but a free procmail rule.
Do You Yahoo!?
Yahoo! - Official partner of 2002 FIFA World Cup