[sane-devel] Umax Astra 2000P problem

[VOLTZ Stéphane]

      I'd be interested by the output of ./umax_pp -p -t 1 , to know how 
your scanner is detected. You can also try to put an 'astra' option in 
umax_pp.conf (in /usr/local/etc/sane.d by default) :

option astra 2000

or

option astra 1600


    I think your scanner has a 1600P CCD but is treated like a 2000P, or 
the other way round.

Regards,
    Stef

Tim Johnson wrote:

>Hello, in the past I've been able to the Umax Astra 2000P running very 
>good under Linux using the umax_pp patch.  I just installed the latest 
>Mandrake and downloaded the latest sane backends and umap_pp patch and 
>installed them.  I am able to access the scanner correctly and everything 
>appears fine until I attempt to scan something.
>
>When I scan with umax_pp -s, the colors appear off, but this image is 
>very distinguishable, everything the scans come out purple, but I assume 
>I can probably adjust this in a config file somewhere.  The real issue is 
>when attempt to use xsane or scanimage to scan.  The image is completely 
>trashed.  I normally end up with an image of almost nothing except green 
>noise.  When I attempt to adjust the images, sometimes I can see just a 
>hint of the image in the noise, but nothing anywhere close to what I 
>would call a distinguishable image.  I do not believe it is a hardware 
>problem be
>cause I have been able to scan correctly under another OS (I 
>only used it to perform this test, I promise).
>
>Anyone have any suggestions?  I have samples I can send if any of you 
>wish to see them.
>
>Thank you,
>
>-Tim
>_______________________________________________
>Sane-devel mailing list
>Sane-devel at www.mostang.com
>http://www.mostang.com/mailman/listinfo/sane-devel
>