[sane-devel] usb umax 2200 configuration issues II

john manoogian III lists at jm3.net
Mon Mar 25 16:36:46 GMT 2002


On Sun, Mar 24, 2002 at 10:35:53PM -0500, lists at jm3.net wrote:
> 
> i've been trying to get my umax 2200us working with usb [it worked well with
> scsi and sane in the past]. basically, sane 1.0.7 with the build33 patch is
...
> the only thing i can think of is that my kernel version is too
> old (2.4.2). i am downloading 2.4.18 now, in hopes that it will work.

okay, i upgraded to the 2.4.18 kernel. things are better, but not yet
functional. here's what happens now: i can run xsane, and preview, but not
scan. xsane prompts me to pick a scanner [dev/usbscanner0, /dev/usr/scanner0,
/dev/ usbscanner], so i pick the first one. xsane loads, i preview, the preview
image looks swell. i hit 'start', the scanner acts like it's going to start,
then the light goes off (i think) and then nothing happens.

i posted the results of running xsane (with debug=255) at:

  http://jm3.net/misc/sane-usb-problems/out

(the erroneous part seems to be at the very end

> [umax] do_calibration
> [umax] wait_scanner
> [umax] Sending SCSI cmd 0x00 cdb len 6, param len 0, result len 0
> [umax] error in sanei_pv8630_bulkread (got 02)
> [umax] scanner reports Error during device I/O, waiting ...
> [umax] Sending SCSI cmd 0x00 cdb len 6, param len 0, result len 0
)

could xsane thinking that i have 3 usb scanner devices be messing this up?

 jm3 / john manoogian III / jm3 at jm3.net / http://jm3.net



More information about the sane-devel mailing list