[sane-devel] usb umax 2200 configuration issues II

[Frank Zago]

Hi John,

Pull and plug the USB cable. That will reset the scanner. Try again to
scan.
If that doesn't work, Pull/plug the cable and start xsane with the
device option (eg xsane umax:/dev/usbscanner0).

Hope that helps,
  Frank.

On Mon, 25 Mar 2002, john manoogian III wrote:

> On Sun, Mar 24, 2002 at 10:35:53PM -0500, lists at jm3.net wrote:
> >
> > i've been trying to get my umax 2200us working with usb [it worked well with
> > scsi and sane in the past]. basically, sane 1.0.7 with the build33 patch is
> ...
> > the only thing i can think of is that my kernel version is too
> > old (2.4.2). i am downloading 2.4.18 now, in hopes that it will work.
>
> okay, i upgraded to the 2.4.18 kernel. things are better, but not yet
> functional. here's what happens now: i can run xsane, and preview, but not
> scan. xsane prompts me to pick a scanner [dev/usbscanner0, /dev/usr/scanner0,
> /dev/ usbscanner], so i pick the first one. xsane loads, i preview, the preview
> image looks swell. i hit 'start', the scanner acts like it's going to start,
> then the light goes off (i think) and then nothing happens.
>
> i posted the results of running xsane (with debug=255) at:
>
>   http://jm3.net/misc/sane-usb-problems/out
>
> (the erroneous part seems to be at the very end
>
> > [umax] do_calibration
> > [umax] wait_scanner
> > [umax] Sending SCSI cmd 0x00 cdb len 6, param len 0, result len 0
> > [umax] error in sanei_pv8630_bulkread (got 02)
> > [umax] scanner reports Error during device I/O, waiting ...
> > [umax] Sending SCSI cmd 0x00 cdb len 6, param len 0, result len 0
> )
>
> could xsane thinking that i have 3 usb scanner devices be messing this up?
>
>  jm3 / john manoogian III / jm3 at jm3.net / http://jm3.net
> _______________________________________________
> Sane-devel mailing list
> Sane-devel at www.mostang.com
> http://www.mostang.com/mailman/listinfo/sane-devel
>

--
Frank Zago - Gresham Enterprise Storage - www.greshamstorage.com