[sane-devel] loosing contact to scanner (warmup problem?)

[Jim Newton]

hi, after my scanner has been on for a couple of days,
including xsane running the entire time.  no restart, no reboot.

a scanner is still found in /proc/bus/usb/devices (see below),
but sane-find-scanner can no longer find it, and xsane can no longer
connect to it.  and after sane-find-scanner no longer finds the
scanner, then /proc/bus/usb/devices no longer knows what kind
of scanner it is.  notice earlier the lines 
S:  Manufacturer=AGFA
S:  Product= SNAPSCAN e40  
appear in /proc/bus/usb/devices, but afterward they no longer appear
there....
NOT EVEN modprobe  scanner vendor=0x06bd product=0x208d
fixes the problem.  i believe it starts working again, if i reboot
and then run modprobe  scanner vendor=0x06bd product=0x208d

-jim

B:  Alloc= 17/900 us ( 2%), #Int=  1, #Iso=  0
D:  Ver= 1.00 Cls=09(hub  ) Sub=00 Prot=00 MxPS= 8 #Cfgs=  1
P:  Vendor=0000 ProdID=0000 Rev= 0.00
S:  Product=USB UHCI Root Hub
S:  SerialNumber=d400
C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr=  0mA
I:  If#= 0 Alt= 0 #EPs= 1 Cls=09(hub  ) Sub=00 Prot=00 Driver=hub
E:  Ad=81(I) Atr=03(Int.) MxPS=   8 Ivl=255ms
T:  Bus=01 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#=  2 Spd=12  MxCh= 0
D:  Ver= 1.00 Cls=ff(vend.) Sub=ff Prot=ff MxPS= 8 #Cfgs=  1
P:  Vendor=06bd ProdID=208d Rev= 1.10
S:  Manufacturer=AGFA
S:  Product= SNAPSCAN e40   
C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr=100mA
I:  If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=usbscanner
E:  Ad=81(I) Atr=02(Bulk) MxPS=  64 Ivl=  0ms
E:  Ad=02(O) Atr=02(Bulk) MxPS=   8 Ivl=  0ms
E:  Ad=83(I) Atr=03(Int.) MxPS=   8 Ivl= 16ms
[jimka@localhost jimka]# sane-find-scanner
# Note that sane-find-scanner will find any scanner that is connected
# to a SCSI bus and some scanners that are connected to the Universal
# Serial Bus (USB) depending on your OS. It will even find scanners
# that are not supported at all by SANE. It won't find a scanner that
# is connected to a parallel or proprietary port.

[jimka@localhost jimka]# !cat
cat /proc/bus/usb/devices
T:  Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#=  1 Spd=12  MxCh= 2
B:  Alloc= 17/900 us ( 2%), #Int=  1, #Iso=  0
D:  Ver= 1.00 Cls=09(hub  ) Sub=00 Prot=00 MxPS= 8 #Cfgs=  1
P:  Vendor=0000 ProdID=0000 Rev= 0.00
S:  Product=USB UHCI Root Hub
S:  SerialNumber=d400
C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr=  0mA
I:  If#= 0 Alt= 0 #EPs= 1 Cls=09(hub  ) Sub=00 Prot=00 Driver=hub
E:  Ad=81(I) Atr=03(Int.) MxPS=   8 Ivl=255ms
T:  Bus=01 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#=  2 Spd=12  MxCh= 0
D:  Ver= 1.00 Cls=ff(vend.) Sub=ff Prot=ff MxPS= 8 #Cfgs=  1
P:  Vendor=06bd ProdID=208d Rev= 1.10
C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr=100mA
I:  If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=usbscanner
E:  Ad=81(I) Atr=02(Bulk) MxPS=  64 Ivl=  0ms
E:  Ad=02(O) Atr=02(Bulk) MxPS=   8 Ivl=  0ms
E:  Ad=83(I) Atr=03(Int.) MxPS=   8 Ivl= 16ms