[sane-devel] sane-find-scanner works but scanimage does not find a scanner

[Wolfgang Rapp]

Sylvain Petreolle schrieb:
> 
> I 've only these two lines in my snapscan.conf :
> (I've not updated the file for months though I have
> the last CVS code)
> 
> /dev/usb/scanner0
> firmware /mnt/hda/windows/system/snape20.bin
> 
For me I also have a similar snapscan.conf entry like above.
What kernel do you run and witch sane version.
Please also check that the dev scanner0 is present with MAJOR-Nr 180 and
MINOR-Nr 48
this is not always created automaticly in all distributions.
Also the driver module scanner.o must be loaded for USB-scanners.
All this run on RedHat 6.0 with kernel version 2.2.19 and sane 1.0.7 

Bye Wolfgang

  --- Jim Newton <jimka at rdrop.com> a écrit : > do i
> need to be using /etc/sane.d or
> > /usr/local/etc/sane.d
> >
> > in response to your email, i've created
> > /usr/local/etc/sane.d
> > which did not previously exist.  i've made it a link
> > to /etc/sane.d
> >
> > I've downloaded the Snape40.bin into my home
> > directory, because
> > i do not have any microsoft window installed on my
> > computer.
> >
> > can you have a look at my snapscan.conf and compare
> > it to yours.
> > can you tell me if you see any significant
> > difference????
> >
> > -jim> #------------------------------ General
> > -----------------------------------
> >
> > # Change to the fully qualified filename of your
> > firmware file, if
> > # firmware upload is needed by the scanner
> > firmware /home/jimka/Snape40.bin
> >
> > # If not automatically found you may manually
> > specify a device name.
> >
> > # For USB scanners also specify bus=usb, e.g.
> > /dev/usb/scanner0 bus=usb
> >
> > # For SCSI scanners specify the generic device, e.g.
> > /dev/sg0 on Linux.
> > # /dev/sg0
> >
> >
> #---------------------------------------------------------------------------
> > # No changes should be necessary below this line
> >
> #---------------------------------------------------------------------------
> >
> > #-------------------------- SCSI scanners
> > ----------------------------------
> > # These SCSI devices will be probed automatically
> > scsi AGFA * Scanner
> > scsi COLOR * Scanner
> > scsi Color * Scanner
> > scsi ACERPERI * Scanner
> >
> > #--------------------------- USB scanners
> > -----------------------------------
> > # These USB devices will be probed automatically
> > # (This will currently work only on Linux)
> >
> > # Acer 620U / 620UT
> > usb 0x04a5 0x2040
> > # Acer 640U
> > usb 0x04a5 0x2060
> > # Acer 640BU
> > usb 0x04a5 0x207e
> > # Acer 1240U
> > usb 0x04a5 0x20c0
> > # Acer 3300 / 4300
> > usb 0x04a5 0x20b0
> > # Acer 4300
> > usb 0x04a5 0x20de
> > # Agfa 1236U
> > usb 0x06bd 0x0002
> > # Agfa 1212U
> > usb 0x06bd 0x0001
> > usb 0x06bd 0x2061
> > # Agfa Snapscan e20
> > usb 0x06bd 0x2091
> > # Agfa Snapscan e25
> > usb 0x06bd 0x2095
> > # Agfa Snapscan e26
> > usb 0x06bd 0x2097
> > # Agfa Snapscan e40
> > usb 0x06bd 0x208d
> > # Agfa Snapscan e42
> > usb 0x06bd 0x20ff
> > # Agfa Snapscan e50
> > usb 0x06bd 0x208f
> > # Agfa Snapscan e52
> > usb 0x06bd 0x20fd
> >
> >
> 
> ___________________________________________________________
> Do You Yahoo!? -- Une adresse @yahoo.fr gratuite et en français !
> Yahoo! Mail : http://fr.mail.yahoo.com
> _______________________________________________
> Sane-devel mailing list
> Sane-devel at www.mostang.com
> http://www.mostang.com/mailman/listinfo/sane-devel