[sane-devel] Re: hijacking subject line :)

[Morten Arnesen]

Morten Arnesen wrote:
> 
> i try to connect to a server which is running sane, with no luck.
> 
> here are the output from scanimage -L with debugging 255:
> [root at morten sane.d]# cat debug.log
> [sanei_debug] Setting debug level of net to 255.
> [net] sane_init: authorize = 0x8049240, version_code = 0xbffff56c
> [net] sane_init: SANE net backend version 1.0.6 from sane-backends-1.0.7
> [net] sane_init: Client has little endian byte order
> [net] sane_init: determining sane service port
> [net] sane_init: found port 6566
> [net] sane_init: searching for config file
> [net] sane_init: trying to add 192.168.0.1
> [net] add_device: adding backend 192.168.0.1
> [net] add_device: backend 192.168.0.1 added
> [net] sane_init: done reading config
> [net] sane_init: evaluating environment variable SANE_NET_HOSTS
> [net] sane_init: done
> [net] sane_get_devices: local_only = 0
> [net] connect_dev: trying to connect to 192.168.0.1
> [net] connect_dev: connection succeeded
> [net] connect_dev: sanei_w_init
> [net] connect_dev: net_init (user=morten, local version=1.0.3)
> [net] connect_dev: freeing init reply (status=Access to resource has
> been denied, remote version=0.0.0)
> [net] connect_dev: access to 192.168.0.1 denied
> [net] connect_dev: closing connection to 192.168.0.1
> [net] sane_get_devices: ignoring failure to connect to 192.168.0.1
> [net] sane_get_devices: finished (0 devices)
> [net] sane_exit: exiting
> [net] sane_exit: closing dev 0x8051960, ctl=-1
> [net] sane_exit: finished.
> 
> anyone see the problem here?
> 
> both are running ver 1.0.7 (rpm from rawhide) on an redhat linux
> 7.2(server)/7.3(workstation)
> 
> mvh morten LC1OCT
> tlf: +47 7027 7036   fax +47 70 27 82 77
> _______________________________________________
> Sane-devel mailing list
> Sane-devel at www.mostang.com
> http://www.mostang.com/mailman/listinfo/sane-devel
sorry for the hijacking there :)

second can tell you that my problems are solved, both server and ws (ws
problem seems to be config problems).

third i'll thank all of you which are using your time to develop this
great software. i have never seen better pages scanned with this
scanner!! so i just shout GREAT!!!!

thank you again :-)
-- 
sincerly morten LC1OCT
tlf: +47 7027 7036   fax +47 70 27 82 77