[sane-devel] epson scanner driving me crazy

[Karl Heinz Kremer]

--5vNYLRcllDrimb99
Content-Type: text/plain; charset=us-ascii
Content-Disposition: inline
Content-Transfer-Encoding: quoted-printable

On Fri, Oct 25, 2002 at 11:23:09PM +0100, Emilio Fesocchi wrote:
[ ... ]
> [sanei_debug] Setting debug level of epson to 128.
> [epson] sane_init: sane-backends 1.0.9
> [epson] sane_init, ># epson.conf<
> [epson] sane_init, >#<
> [epson] sane_init, ># here are some examples for how to configure the EPS=
ON backend<
> [epson] sane_init, >#<
> [epson] sane_init, ># SCSI scanner:<
> [epson] sane_init, >scsi EPSON<
> [epson] sane_init, >scsi EPSON<
> [epson] sane_init, >#<
> [epson] sane_init, ># Parallel port scanner:<
> [epson] sane_init, >#pio 0x278<
> [epson] sane_init, >#pio 0x378<
> [epson] sane_init, >#pio 0x3BC<
> [epson] sane_init, >#<
> [epson] sane_init, ># USB scanner - only enable this if you have an EPSON=
 scanner. It could<
> [epson] sane_init, >#               otherwise block your non-EPSON scanne=
r from being<
> [epson] sane_init, >#               recognized.<
> [epson] sane_init, >#           Depending on your distribution, you may n=
eed either the<
> [epson] sane_init, >#           first or the second entry.<
> [epson] sane_init, >#usb /dev/usbscanner0<
> [epson] sane_init, >#usb /dev/usb/scanner0<
> [epson] sane_get_devices()

This is your problem: The config file does not contain a valid entry
for a USB scanner. Both usb entries are commented out. You have to
enable one of these lines (probably the second one). If you think
you already did this, then you have two versions of Sane (or at
least of the config files) installed. The fact that you think you
commented out the v4l entry also suggests this: If this were the
case, you would not see the v4l entries in your log.

Please check that you have only one version of Sane installed.

Karl Heinz

--=20
Karl Heinz Kremer                                  khk@khk.net
PGP Key at                 http://www.khk.net/download/khk.asc
EPSON Sane Backend:                         http://www.khk.net

--5vNYLRcllDrimb99
Content-Type: application/pgp-signature
Content-Disposition: inline

-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.0.7 (GNU/Linux)

iD8DBQE9udSIxejv3RfKrhsRAnZwAKDkyUhv/rjNMbkSAjttBV1ZNLmnWACfdSSO
gE2rOjTDbyR9pqEzV5DfLLs=
=X5un
-----END PGP SIGNATURE-----

--5vNYLRcllDrimb99--