[sane-devel] HP SJ5300C

[Rene Rebe]

Hi.

If you would have included the scanner mfg and model in your first
mails I wouldn't had overread them ...

On: Mon, 07 Apr 2003 15:29:10 +0800,
    "Daniel Sim" <xkjyeah@hotmail.com> wrote:

> Thanks for telling me to use a CVS snapshot (downloaded it on 07 Apri=
l), =

> but...
> I cannot seem to get it right... can anybody help?
> =

> Hardware:
> Hewlett Packard Scanjet 5300C USB
> =

> Software:
> Slackware 8.1
> Linux 2.4.18
> CVS Snapshot of SANE
> =

> Modules:
> -hpusbscsi

Not needed anymore. (deprecated)

> -usbcore
> -usb-storage (for my external ZIP drive)
> -uhci
> -scanner (with vendor=3D0x03f0 product=3D0x0701)

Urghs. The scanner.c lack some functionaliry so it will never work
with this one! Please do not load it!

> Do I have to emulate SCSI? If yes, I think I have (hpusbscsi) attempt=
ed to =

> do so. I do not have usb-scsi (I think this version of the kernel doe=
s not =

> have it.) BTW, before I installed the CVS snapshot, I had run make un=
install =

> for the 1.0.10 version.

You do not have to emulate SCSI when using the CVS version.

The hpusbscsi usage is now _deprecated_! Please make sure it is no
longer loaded on your workstation!!!

Instead you must have the usbfs mounted:
mount -t usbfs none /proc/bus/usb -o devmode=3D0666

(The devmode=3D0666 might be a security hole - if you have a sane
distribution simply ommit the -o devmode=3D0666; the hot-plug system
should make sure the device gets the proper permissions ...)

Btw: The backend homepage is:
  http://drocklinux.dyndns.org/rene/avision

> sane-find-scanner finds the scanner at /dev/usb/scanner0. scanimage -=
L finds =

> no scanner. When I unload the generic scanner module, sane-find-scann=
er does =

> not detect.

Although you forced the scanner module to use your HP scanner and you
have a /dev/usb/scanner0 this device node will not be functional - due
to missing features in the scanner driver.

If you would only load hpusbscsi then you should get a scsi device
node - but this deprecated, make sure the usbfs is mounted (see above)
and the permissions of those files in /proc/bus/usb allow your user to
reda/wrtite the files.

> So sorry to trouble you ppl, but I am new to Linux. How do I configur=
e my =

> avision.conf or hp.conf? What other modules do I need to modprobe... =
and =

> what other things do I need to do apart from the following:
> =

> tar xfz
> del tar
> ./configure
> make
> make install
> modprobe XXXX;modprobe XXXX;... ;modprobe XXXX;modprobe XXXX;

When you modprobe some stuff which is not supost to work ...

> sane-find-scanner
> scanimage -L
> *bang the table on seeing undesired results*

Sicerely,
- Ren=E9

--  =

Ren=E9 Rebe - Europe/Germany/Berlin
e-mail:   rene@rocklinux.org, rene.rebe@gmx.net
web:      http://www.rocklinux.org/people/rene http://gsmp.tfh-berlin.d=
e/rene/

Anyone sending unwanted advertising e-mail to this address will be
charged $25 for network traffic and computing time. By extracting my
address from this message or its header, you agree to these terms.