[sane-devel] Epson Perfection 1260/plustek problems (was: Problems problems problems)

[Gerhard Jaeger]

Hi,

what you observe here is the calibration routine which takes place on
each scan cycle. The clicks shouldn't appear so far - I'll cross check th=
is.

Gerhard

On Samstag, 12. April 2003 18:24, Steven Lobbezoo wrote:
> I use Xsane to scan.
> It's the time to get a scan, each time.
> When I push the button scan or aquire pre-scan
> it takes about 20/30 seconds before something happens,
> then i first hear a low 'grunting' noise (as if the motor
> tries to move in the wrong direction) then a few
> clicks and the scan strats moving.
> The process itself scans with normal speed.
>
> Steven
>
> Le Samedi 12 Avril 2003 11:51, Henning Meier-Geinitz a =E9crit :
> > Hi,
> >
> > On Sat, Apr 12, 2003 at 10:13:30AM +0200, Steven Lobbezoo wrote:
> > > In the mean time i installed Suse 8.2 with sane 1.10.
> > > All is well now. The scanner works now, but startup
> > > is EXTREMELY slow.
> >
> > Can you explain this in more detail? Does the detection of devices
> > take long? Or the first scan? All scans? The time from pressing the
> > scan button until the scan head moves?
> >
> > Ciao,
> >   Henning
> > _______________________________________________
> > Sane-devel mailing list
> > Sane-devel@www.mostang.com
> > http://www.mostang.com/mailman/listinfo/sane-devel
>
> _______________________________________________
> Sane-devel mailing list
> Sane-devel@www.mostang.com
> http://www.mostang.com/mailman/listinfo/sane-devel