[sane-devel] Mustek Scanmagic 9636S not works
Henning Meier-Geinitz
henning at meier-geinitz.de
Sat Apr 5 15:46:17 BST 2003
Hi,
please respond to the list, not to me. Maybe other people have more
ideas about your problem.
On Sat, Apr 05, 2003 at 01:58:48PM +0000, José López Ruiz wrote:
> >>init_module: No such device.
> >>
> Hint: insmod errors can be caused by incorrect module parameters,
> including invalid IO or IRQ parameters.
> insmod /lib/modules/2.4.14/kernel/drivers/scsi/g_NCR5380.o failed.
> insmod g_NCR5380 failed.
>
> >Well, I don't have clairvoyance :-) What are the error messages on the
> >command line and in /var/log/syslog?
Looks like wrong parameters. All my cards worked with the default
settings but some people reported that they had to change i/o
settings. Maybe a different card uses the same i/o range?
> With other I/O not works. The same error.
Card defective or not plugged in correctly? Try a different ISA slot.
> Apr 5 13:35:23 anastasia kernel: SCSI subsystem driver Revision: 1.00
> Apr 5 13:35:23 anastasia kernel: scsi0 : SCSI host adapter emulation for IDE ATAPI devices
> Apr 5 13:35:23 anastasia kernel: Vendor: RICOH Model: CD-R/RW MP7083A Rev: 1.10
> Apr 5 13:35:23 anastasia kernel: Type: CD-ROM ANSI SCSI revision: 02
> Apr 5 13:35:23 anastasia kernel: Attached scsi CD-ROM sr0 at scsi0, channel 0, id 0, lun 0
> Apr 5 13:35:23 anastasia kernel: sr0: scsi3-mmc drive: 32x/32x writer cd/rw xa/form2 cdda tray
> Apr 5 13:35:23 anastasia kernel: Uniform CD-ROM driver Revision: 3.12
I'm not sure if this is a problem here but there were reports about
the SCSI emultation for CDROMS making trouble with detection of real
SCSI devices. I would be surprised if it stops the detection of SCSI
controllers but you'd better try without idescsi.
> Apr 5 13:56:08 anastasia pppd[374]: sent [PAP AuthReq id=0x1
> user="******" password=<hidden>]
Thanks for your user id :-) Be carefull with sending complete logs to
other people without checking what you send. The opassword was hidden
in this case but that may be different with other logs.
Bye,
Henning
More information about the sane-devel
mailing list