[sane-devel] Mustek Scanmagic 9636S not works

José López Ruiz anastasia at m.adade.es
Sun Apr 6 01:09:40 BST 2003


>Hi,
>
>please respond to the list, not to me. Maybe other people have more
>ideas about your problem.
>
>System:
>
>Debian Woody 3.0
>
>Kernel compiled: 2.4.14
>
>Module: g_NCR5380
>
>
>
>Scanner: Mustek Scanmagic 9636S
>
>Chip: DTC3181LE(DOMEX 436P)
>
>
>
>Command modprobe g_NCR5380 ncr_addr=0x280 dtc_3181e=1  Fail
>
>Why???
>
>
>On Sat, Apr 05, 2003 at 01:58:48PM +0000, José López Ruiz wrote:
>  
>
>>>>init_module: No such device.
>>>>
>>>>        
>>>>
>>   Hint: insmod errors can be caused by incorrect module parameters, 
>>including invalid IO or IRQ parameters.
>>   insmod /lib/modules/2.4.14/kernel/drivers/scsi/g_NCR5380.o failed.
>>   insmod g_NCR5380 failed.
>>
>>    
>>
>>>Well, I don't have clairvoyance :-) What are the error messages on the
>>>command line and in /var/log/syslog?
>>>      
>>>
>
>Looks like wrong parameters. All my cards worked with the default
>settings but some people reported that they had to change i/o
>settings. Maybe a different card uses the same i/o range?
>
>  
>
>>   With other I/O not works. The same error.
>>    
>>
>
>Card defective or not plugged in correctly? Try a different ISA slot. 
>
>  
>
>>Apr  5 13:35:23 kernel: SCSI subsystem driver Revision: 1.00
>>Apr  5 13:35:23 kernel: scsi0 : SCSI host adapter emulation for IDE ATAPI devices
>>Apr  5 13:35:23 kernel:   Vendor: RICOH     Model: CD-R/RW MP7083A   Rev: 1.10
>>Apr  5 13:35:23 kernel:   Type:   CD-ROM                             ANSI SCSI revision: 02
>>Apr  5 13:35:23 kernel: Attached scsi CD-ROM sr0 at scsi0, channel 0, id 0, lun 0
>>Apr  5 13:35:23 kernel: sr0: scsi3-mmc drive: 32x/32x writer cd/rw xa/form2 cdda tray
>>Apr  5 13:35:23 kernel: Uniform CD-ROM driver Revision: 3.12
>>    
>>
>
>I'm not sure if this is a problem here but there were reports about
>the SCSI emultation for CDROMS making trouble with detection of real
>SCSI devices. I would be surprised if it stops the detection of SCSI
>controllers but you'd better try without idescsi.
>
>  
>
>
>
>
>  
>






More information about the sane-devel mailing list