[sane-devel] Epson CX5200 not detected with sane-find-scanner
Jeff Courtade
jeff@courtade.net
Tue, 05 Aug 2003 11:51:16 -0400
Yes it does detect it twice
When I set the debug I do not get any additional info
jeff@humdinger:~$ export SANE_DEBUG_EPSON=255
jeff@humdinger:~$ sane-find-scanner
Jeff Courtade
# No SCSI scanners found. If you expected something different, make
sure that
# you have loaded a SCSI driver for your SCSI adapter.
found USB scanner (vendor=0x04b8, product=0x0801) at /dev/usb/scanner0
found USB scanner (vendor=0x04b8, product=0x0801) at libusb:001:004
# Your USB scanner was (probably) detected. It may or may not be
supported by
# SANE. Try scanimage -L and read the backend's manpage.
# Scanners connected to the parallel port or other proprietary ports
can't be
# detected by this program.
# You may want to run this program as root to find all devices. Once you
# found the scanner devices, be sure to adjust access permissions as
# necessary.
jeff@humdinger:~$ sudo scanimage -L
No scanners were identified. If you were expecting something different,
check that the scanner is plugged in, turned on and detected by the
sane-find-scanner tool (if appropriate). Please read the documentation
which came with this software (README, FAQ, manpages).
Henning Meier-Geinitz wrote:
>Hi,
>
>On Tue, Aug 05, 2003 at 07:11:17AM -0400, Jeff Courtade wrote:
>
>
>>sane-find-scanner output shows it detecting the scanner
>>
>>
>
>I should detect it twice according your logs, once at
>/dev/usb/scanner0 and once at libusb:001:004.
>
>
>
>>and the epson.conf has one line that is uncommented
>>
>>usb /dev/usb/scanner0
>>
>>
>
>Should be ok. You could also try just "usb" without anything else.
>
>Please show us the output when debugging is enabled:
>
>SANE_DEBUG_EPSON=255 scanimage -L
>
>Bye,
> Henning
>_______________________________________________
>Sane-devel mailing list
>Sane-devel@www.mostang.com
>http://www.mostang.com/mailman/listinfo/sane-devel
>
>