[sane-devel] Information about new EPSON Scanner "Perfection 1670"
Karl Heinz Kremer
khk at khk.net
Wed Aug 13 01:45:47 BST 2003
The new EPSON Perfection 1670 is not and will not be supported by the
EPSON backend.
It's design seems to be similar to the Perfection 1260, which is
supported by the Plustek
backend. I have not seen this new scanner, so I don't know if it really
falls into the same
category as the Perfection 1670.
The /proc/bus/usb/devices output looks similar (at least it has an
interrupt endpoint):
E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=256ms
T: Bus=01 Lev=01 Prnt=01 Port=05 Cnt=01 Dev#= 2 Spd=480 MxCh= 0
D: Ver= 2.00 Cls=ff(vend.) Sub=ff Prot=ff MxPS=64 #Cfgs= 1
P: Vendor=04b8 ProdID=011f Rev= 1.07
S: Manufacturer=EPSON
S: Product=EPSON Scanner
C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr=100mA
I: If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=usbscanner
E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=83(I) Atr=03(Int.) MxPS= 8 Ivl=4096ms
I already know of one unlucky customer who thought because the model
number
was similar than the 1660, it would work the same way.
Karl Heinz
More information about the sane-devel
mailing list