[sane-devel] Epson Perfection 2400 on RH 9
Sun, 14 Dec 2003 08:11:17 -0800
Just got my Epson Perfection 2400 scanner. Attached it to my RH9 box. Installed the latest sane-backends tarball.
Here is what I see:
does find the scanner
But scanimage -L doesnt find it.
cat /proc/bus/usb/devices does show my scanner.
lsmod also shows the scanner module loaded. Just to be sure I did a
modprobe scanner vendor=0x.. product=0x...
No problem here.
I uncommented the
line in /etc/sane.d/epson.conf
/etc/sane.d/dll.conf does have the epson line uncommented
If I do a scanimage -d epson:/dev/usb/scanner0 it says 'Cannot open device'.
Still no luck. What am I missing? Perfection 2400 does seem to be supported by the sane-epson backend.
The FREE service that prevents junk email http://www.mailshell.com