[sane-devel] [Fwd: Re: [lp.epson] Epson CX5400]
Till Kamppeter
till.kamppeter@gmx.net
Mon, 15 Dec 2003 19:21:41 +0000
This is a multi-part message in MIME format.
--------------050805020801060101080009
Content-Type: text/plain; charset=us-ascii; format=flowed
Content-Transfer-Encoding: 7bit
Here is a user confirmation that the Epson Stylus CX5400 (MF device)
scans with the "epson" backend.
Till
--------------050805020801060101080009
Content-Type: message/rfc822;
name="Re: [lp.epson] Epson CX5400"
Content-Transfer-Encoding: 7bit
Content-Disposition: inline;
filename="Re: [lp.epson] Epson CX5400"
Path: news.linuxprinting.org!not-for-mail
From: sehh@altered.com (Dimitris)
Newsgroups: linuxprinting.epson.general
Subject: Re: [lp.epson] Epson CX5400
Date: Mon, 15 Dec 2003 17:09:02 +0000 (UTC)
Organization: http://www.linuxprinting.org/
Message-ID: <brkpre$bic$1@poblano.linuxprinting.org>
References: <bqoa9b$khe$1@poblano.linuxprinting.org>
NNTP-Posting-Host: poblano.linuxprinting.org
X-Trace: poblano.linuxprinting.org 1071508142 11852 127.0.0.1 (15 Dec 2003 17:09:02 GMT)
X-Complaints-To: usenet@linuxprinting.org
NNTP-Posting-Date: Mon, 15 Dec 2003 17:09:02 +0000 (UTC)
User-Agent: WebNews/LinuxPrinting.org $Revision: 1.5 $.
Xref: news.linuxprinting.org linuxprinting.epson.general:3304
In article <bqoa9b$khe$1@poblano.linuxprinting.org>, fred_sanders@hotmail.com
(Fred Sanders) writes:
>
> I have the Epson Stylus CX5400 working for both printing and scanning. I'm
> running Fedora Core 1 (2.4.22-1.2129.nptl kernel). I had to add the
following
> entry in my /etc/sane.d/epson.conf file: usb 0x4b8 0x808
>
> Xsane now works for scanning after that fix.
I can confirm that this works. My 5400 scans fine once i added
the following line in /etc/sane.d/epson.conf
usb 0x4b8 0x808
then run:
modprobe scanner vendor=0x4b8 product=0x808
that did the trick. i can use xsane, or gimp to scan
without any problems. its quite fast too!
--------------050805020801060101080009--