[sane-devel] gt68xx: Everything works but scanimage fails

[Christoph Bier]

Hi!

Henning Meier-Geinitz schrieb:
> Hi,
> 
> On Sat, Feb 15, 2003 at 10:34:57AM +0100, Christoph Bier wrote:

[. . .]
>>- installed SANE 1.0.10-1 as deb-Package from
>>  deb http://people.debian.org/~aurel32/SANE stable main
>>  (I'm missing man sane-gt68xx.conf)
> 
> 
> See man sane-gt68xx. Vor an overview about sane and all the sane
> manual pages, see man sane. Or do you mean that the sane-gt68xx manual
> page is not in the debian package? In this case, file a bug report in
> the Debian bug tracking system.

The latter . . .

[. . .]

>>- copied the firmware (ps2fw.usb) to /usr/local/share/sane/gt68xx/
> 
> 
> At least the firmware of my 2400 CU Plus is named "PS2Dfw.usb".
> "PS2fw.usb" is the firmware for the 2400 CU (without plus), a
> completely different scanner.

Of course, you're right. I use PS2Dfw.usb.

> 
>>- to be sure put firmware "/usr/local/share/sane/gt68xx/ps2fw.usb"
>>  in gt68xx.conf
> 
> 
> Put it after the "usb 0x055f 0x021d" line.

I did so.

[. . .]

>>BUT: $ scanimage -L can not identify any scanner.
>>Did I forget something? What's wrong? Can somebody
>>help me? Thanks!
> 
> 
> Have a look ath the debug output:
> SANE_DEBUG_GT68XX=255 scanimage -L
> 
> If you can't find out what's wrong, send the debug output to this list.
> If you don't get any debug output, check that "gt68xx" is in dll.conf.

I don't get any output and "gt68xx" is in dll.conf.
Because there was only a dll.conf.dpkg-dist on
my system I copied it to dll.conf. But no difference
-- no output of
$ SANE_DEBUG_GT68XX=255 scanimage -L
 I tried this before already. I really don't know what's
going wrong on my system . . . Any further suggestions?

Thanks for your answer, Henning!

Greetings
-- 
Christoph Bier, Dipl.Oecotroph., Email: bier at wiz.uni-kassel.de
Universitaet Kassel, FG Oekologische Lebensmittelqualitaet und
Ernaehrungskultur \\ Postfach 12 52 \\ 37202 Witzenhausen
Tel.: +49 (0) 55 42 / 98 -17 21, Fax: -17 13