[sane-devel] ScanJet 5300C question
Sun, 29 Jun 2003 23:14:17 +0200 (CEST)
On: Wed, 25 Jun 2003 14:16:23 -0500,
Matt Lung <firstname.lastname@example.org> wrote:
> I would like to use the ADF we have with our HP 5300C scanner under =
> linux and Sane but I have yet to find any documentation or help on ho=
> to setup an ADF with this scanner. It scans just fine without it, bu=
> with out the ADF funcioning I'll be forced to use it in Windows forev=
> Is an ADF even supported with the HP 5300C?
Theoretically yes. But I have still to solve ADF problem for the 7400
series. But older ADF units and the professional ones e.g. from the
Avision 8000 series just work fine. So if you have luck the ADF will
simply work when you plugged it into your scanner.
If the ADF hangs during feeding the first page, use usbsnoop during
ADF scanning under Windows to log the data traffic and send the output
to me. I hope to have some free time this summer to continue to solve
the last HP problems with the backend.
> If so, where can I find information on how to do this?
> thanks for any help
- ROCK Linux stable release maintainer
Ren=E9 Rebe - Europe/Germany/Berlin
http://www.rocklinux.org http://www.rocklinux.org/people/rene =