June 2003 Archives by subject

• Messages sorted by: [ thread ] [ author ] [ date ]
• More info on this list...

Starting: Sun Jun 1 12:32:10 BST 2003
Ending: Mon Jun 30 22:24:47 BST 2003
Messages: 734

• [sane-devel] "gamma" and "bayer" ? Thanks to everyone!   Theodore Kilgore
• [sane-devel] "gamma" and "bayer" ? Thanks to everyone!   Henning Meier-Geinitz
• [sane-devel] "gamma" and "bayer" ? Thanks to everyone!   Erik Inge Bolsø
• [sane-devel] "gamma" and "bayer" ? What are they?   Theodore Kilgore
• [sane-devel] "gamma" and "bayer" ? What are they?   Henning Meier-Geinitz
• [sane-devel] "gamma" and "bayer" ? What are they?   Laurent-jan
• [sane-devel] "gamma" and "bayer" ? What are they?   Peter Fales
• [sane-devel] "gamma" and "bayer" ? What are they?   Theodore Kilgore
• [sane-devel] "gamma" and "bayer" ? What are they?   Theodore Kilgore
• [sane-devel] "gamma" and "bayer" ? What are they?   Theodore Kilgore
• [sane-devel] "gamma" and "bayer" ? What are they?   Thomas VIAL
• [sane-devel] "gamma" and "bayer" ? What are they?   Peter Fales
• [sane-devel] "gamma" and "bayer" ? What are they?   Peter Fales
• [sane-devel] "gamma" and "bayer" ? What are they?   david stevenson
• [sane-devel] "gamma" and "bayer" ? What are they?   der Mouse
• [sane-devel] "gamma" and "bayer" ? What are they?   abel deuring
• [sane-devel] "gamma" and "bayer" Thanks again. It works!   Theodore Kilgore
• [sane-devel] (no subject)   Ayman Haidar
• [sane-devel] (slightly OT) Using an Artec E+ 48U with Knoppix 3.1   Michael Herder
• [sane-devel] [Info] Microstar MR 9791   Michael Herder
• [sane-devel] [Info] Microstar MR 9791   Henning Meier-Geinitz
• [sane-devel] [Info] Microstar MR 9791   Michael Herder
• [sane-devel] [PATCH] backends 1.0.12 compile-error   Julien BLACHE
• [sane-devel] [PATCH] backends 1.0.12 compile-error   Henning Meier-Geinitz
• [sane-devel] [sane-delevel] writing a backend   Foffy
• [sane-devel] [sane-delevel] writing a backend   Henning Meier-Geinitz
• [sane-devel] "gamma" and "bayer" ? Thanks to everyone!   Theodore Kilgore
• [sane-devel] "gamma" and "bayer" ? Thanks to everyone!   Henning Meier-Geinitz
• [sane-devel] "gamma" and "bayer" ? Thanks to everyone!   Erik Inge Bolsø
• [sane-devel] "gamma" and "bayer" ? What are they?   Theodore Kilgore
• [sane-devel] "gamma" and "bayer" ? What are they?   Henning Meier-Geinitz
• [sane-devel] "gamma" and "bayer" ? What are they?   Laurent-jan
• [sane-devel] "gamma" and "bayer" ? What are they?   Peter Fales
• [sane-devel] "gamma" and "bayer" ? What are they?   Theodore Kilgore
• [sane-devel] "gamma" and "bayer" ? What are they?   Theodore Kilgore
• [sane-devel] "gamma" and "bayer" ? What are they?   Theodore Kilgore
• [sane-devel] "gamma" and "bayer" ? What are they?   Thomas VIAL
• [sane-devel] "gamma" and "bayer" ? What are they?   Peter Fales
• [sane-devel] "gamma" and "bayer" ? What are they?   Peter Fales
• [sane-devel] "gamma" and "bayer" ? What are they?   david stevenson
• [sane-devel] "gamma" and "bayer" ? What are they?   der Mouse
• [sane-devel] "gamma" and "bayer" ? What are they?   abel deuring
• [sane-devel] "gamma" and "bayer" Thanks again. It works!   Theodore Kilgore
• [sane-devel] (no subject)   Ayman Haidar
• [sane-devel] (slightly OT) Using an Artec E+ 48U with Knoppix 3.1   Michael Herder
• [sane-devel] [Info] Microstar MR 9791   Michael Herder
• [sane-devel] [Info] Microstar MR 9791   Henning Meier-Geinitz
• [sane-devel] [Info] Microstar MR 9791   Michael Herder
• [sane-devel] [PATCH] backends 1.0.12 compile-error   Julien BLACHE
• [sane-devel] [PATCH] backends 1.0.12 compile-error   Henning Meier-Geinitz
• [sane-devel] [sane-delevel] writing a backend   Foffy
• [sane-devel] [sane-delevel] writing a backend   Henning Meier-Geinitz
• [sane-devel] [sane-devel]The report about 'sane-fujitsu'   hironori kohno
• [sane-devel] [sane-devel]The report about 'sane-fujitsu'   m. allan noah
• [sane-devel] ADF support for HP7450C   TomF
• [sane-devel] Analysis of saned CPU utilization   Jay Guerette
• [sane-devel] Analysis of saned CPU utilization   Julien BLACHE
• [sane-devel] Analysis of saned CPU utilization   Jay Guerette
• [sane-devel] ANNOUNCE: GTK Application for troubleshooting SANE problems   Henning Meier-Geinitz
• [sane-devel] Announcing Scanner-HOWTO at tldp.org   Howard Shane
• [sane-devel] Announcing Scanner-HOWTO at tldp.org   Henning Meier-Geinitz
• [sane-devel] Announcing Scanner-HOWTO at tldp.org   stef
• [sane-devel] Announcing Scanner-HOWTO at tldp.org   Karsten Festag
• [sane-devel] Announcing Scanner-HOWTO at tldp.org   Gerhard Jaeger
• [sane-devel] any drivers do software calibration?   m. allan noah
• [sane-devel] any drivers do software calibration?   Henning Meier-Geinitz
• [sane-devel] any drivers do software calibration?   m. allan noah
• [sane-devel] any scanner drivers that will work with twian compliant digital cams?   technomage
• [sane-devel] any scanner drivers that will work with twian compliant digital cams?   Henning Meier-Geinitz
• [sane-devel] any scanner drivers that will work with twian compliant digital cams?   Peter Fales
• [sane-devel] Any umax persons still on the list?   fsanta
• [sane-devel] Any umax persons still on the list?   Henning Meier-Geinitz
• [sane-devel] Any umax persons still on the list?   Oliver Rauch
• [sane-devel] Avision backend trouble (?) (was: multiple images on XSane)   Henning Meier-Geinitz
• [sane-devel] avision: ADF support for HP7450C   Henning Meier-Geinitz
• [sane-devel] backends 1.0.12 compile-error   Gerfried Maier
• [sane-devel] backends 1.0.12 compile-error   Martijn van Oosterhout
• [sane-devel] backends 1.0.12 compile-error   Gerfried Maier
• [sane-devel] backends 1.0.12 compile-error   Julien BLACHE
• [sane-devel] backends 1.0.12 compile-error   Erik Inge Bolsø
• [sane-devel] backends 1.0.12 compile-error   Thomas Soumarmon
• [sane-devel] backends 1.0.12 compile-error   Henning Meier-Geinitz
• [sane-devel] backends 1.0.12 compile-error   Gerfried Maier
• [sane-devel] backends 1.0.12 compile-error   Gerfried Maier
• [sane-devel] backends 1.0.12 compile-error   Gerfried Maier
• [sane-devel] backends 1.0.12 compile-error   Erik Inge Bolsø
• [sane-devel] backends 1.0.12 compile-error   Erik Inge Bolsø
• [sane-devel] backends 1.0.12 compile-error   Gerfried Maier
• [sane-devel] backends 1.0.12 compile-error   Gerfried Maier
• [sane-devel] backends 1.0.12 compile-error   Julien BLACHE
• [sane-devel] Canon CS 8000F, USB and VMWare   Sergey Berezin
• [sane-devel] Canon CS 8000F, USB and VMWare   Henning Meier-Geinitz
• [sane-devel] Canon Lide 30 backend   Michael Rasile
• [sane-devel] Canon Lide 30 backend   Henning Meier-Geinitz
• [sane-devel] Canon Lide 30 backend   Henning Meier-Geinitz
• [sane-devel] Canon Lide 30 backend   Michael Rasile
• [sane-devel] Canon Lide 30 backend   Henning Meier-Geinitz
• [sane-devel] Canon Lide 30 backend   Jaeger, Gerhard
• [sane-devel] Canoscan D646U???   Philip
• [sane-devel] Canoscan D646U???   Henning Meier-Geinitz
• [sane-devel] compile 1.0.12 on OS/2   Franz Bakan
• [sane-devel] compile 1.0.12 on OS/2   Henning Meier-Geinitz
• [sane-devel] Compiling SANE backends on Mac OS X 10.1.5   David Alan Hjelle
• [sane-devel] Compiling SANE backends on Mac OS X 10.1.5   Frank Zago
• [sane-devel] Compiling SANE backends on Mac OS X 10.1.5   Henning Meier-Geinitz
• [sane-devel] CVS freeze ?   Thomas Soumarmon
• [sane-devel] CVS freeze ?   Julien BLACHE
• [sane-devel] CVS freeze ?   Henning Meier-Geinitz
• [sane-devel] CVS freeze ?   Henning Meier-Geinitz
• [sane-devel] Czech translation   Michael Herder
• [sane-devel] Device description format changed in CVS (.desc files)   Henning Meier-Geinitz
• [sane-devel] Epson perfection 660 ->Problem building on OSX   Brian D. Williams
• [sane-devel] Epson perfection 660 ->Problem building on OSX   Henning Meier-Geinitz
• [sane-devel] Epson perfection 660 ->Problem building on OSX   Brian D. Williams
• [sane-devel] Epson perfection 660 ->Problem building on OSX   Henning Meier-Geinitz
• [sane-devel] Epson perfection 660 ->Problem building on OSX   Brian D. Williams
• [sane-devel] Epson perfection 660 ->Problem building on OSX   Dino Tang
• [sane-devel] Epson perfection 660 ->Problem building on OSX   Henning Meier-Geinitz
• [sane-devel] Epson perfection 660 ->Problem building on OSX   Peter Howard
• [sane-devel] Epson perfection 660 ->Problem building on OSX   Brian D. Williams
• [sane-devel] Epson perfection 660 ->Problem building on OSX   Oliver Schwartz
• [sane-devel] epson: scanimage threshold option not working in 1.0.12 backend   Peter Santoro
• [sane-devel] epson: scanimage threshold option not working in 1.0.12 backend   Karl Heinz Kremer
• [sane-devel] error in linux/videodev.h   Thomas Soumarmon
• [sane-devel] error in linux/videodev.h   Henning Meier-Geinitz
• [sane-devel] error in linux/videodev.h   Thomas Soumarmon
• [sane-devel] error in linux/videodev.h   Henning Meier-Geinitz
• [sane-devel] error in linux/videodev.h   Thomas Soumarmon
• [sane-devel] error in linux/videodev.h   Henning Meier-Geinitz
• [sane-devel] FreeBSD and Microtek Scanmaker II   Nakal
• [sane-devel] FreeBSD and Microtek Scanmaker II   Henning Meier-Geinitz
• [sane-devel] FreeBSD and Microtek Scanmaker II   Nakal
• [sane-devel] FreeBSD and Microtek Scanmaker II   abel deuring
• [sane-devel] FreeBSD and Microtek Scanmaker II   Nakal
• [sane-devel] FreeBSD and Microtek Scanmaker II   abel deuring
• [sane-devel] FreeBSD and Microtek Scanmaker II   Nakal
• [sane-devel] FreeBSD and Microtek Scanmaker II   abel deuring
• [sane-devel] FreeBSD and Microtek Scanmaker II   Nakal
• [sane-devel] FreeBSD and Microtek Scanmaker II   abel deuring
• [sane-devel] FreeBSD and Microtek Scanmaker II   Nakal
• [sane-devel] FreeBSD and Microtek Scanmaker II   abel deuring
• [sane-devel] FreeBSD and Microtek Scanmaker II   Nakal
• [sane-devel] FreeBSD and Microtek Scanmaker II   abel deuring
• [sane-devel] FreeBSD and Microtek Scanmaker II   Matto Marjanovic
• [sane-devel] FreeBSD and Microtek Scanmaker II   Nakal
• [sane-devel] FreeBSD and Microtek Scanmaker II   abel deuring
• [sane-devel] FreeBSD and Microtek Scanmaker II   abel deuring
• [sane-devel] FreeBSD and Microtek Scanmaker II   Henning Meier-Geinitz
• [sane-devel] FreeBSD and Microtek Scanmaker II   abel deuring
• [sane-devel] FreeBSD and Microtek Scanmaker II   Nakal
• [sane-devel] FreeBSD and Microtek Scanmaker II   abel deuring
• [sane-devel] FreeBSD and Microtek Scanmaker II   Matto Marjanovic
• [sane-devel] FreeBSD and Microtek Scanmaker II   abel deuring
• [sane-devel] FreeBSD and Microtek Scanmaker II   Henning Meier-Geinitz
• [sane-devel] FreeBSD and Microtek Scanmaker II   Matto Marjanovic
• [sane-devel] FreeBSD and Microtek Scanmaker II   abel deuring
• [sane-devel] FreeBSD and Microtek Scanmaker II   abel deuring
• [sane-devel] FreeBSD and Microtek Scanmaker II   Nakal
• [sane-devel] FreeBSD and Microtek Scanmaker II   Matto Marjanovic
• [sane-devel] FreeBSD and Microtek Scanmaker II   abel deuring
• [sane-devel] FreeBSD and Microtek Scanmaker II   Matto Marjanovic
• [sane-devel] FreeBSD and Microtek Scanmaker II   abel deuring
• [sane-devel] Fw: RTS8801C2 Serial Number Chipset   jollyprince at juno.com
• [sane-devel] Fw: RTS8801C2 Serial Number Chipset   Henning Meier-Geinitz
• [sane-devel] Fw: RTS8801C2 Serial Number Chipset   jollyprince at juno.com
• [sane-devel] Genius Vivid-3xe   Renito 73
• [sane-devel] Genius Vivid-3xe   Michael Fleming
• [sane-devel] Genius Vivid-3xe part II   Renito 73
• [sane-devel] Genius Vivid-3xe part II   Henning Meier-Geinitz
• [sane-devel] hi!   gnawa
• [sane-devel] hi!   Henning Meier-Geinitz
• [sane-devel] hi!   gnawa
• [sane-devel] HP 7450C ... addendum   Thomas Frayne
• [sane-devel] HP 7450C ... addendum   Rene Rebe
• [sane-devel] HP 7450C ... addendum   Thomas Frayne
• [sane-devel] HP 7450C USB scanner failure with ADF   TomF
• [sane-devel] HP 7450C USB scanner failure with ADF   Jose Paulo Moitinho de Almeida
• [sane-devel] HP 7450C USB scanner failure with ADF   Jose Paulo Moitinho de Almeida
• [sane-devel] HP 7450C USB scanner failure with ADF   TomF
• [sane-devel] HP 7450C USB scanner failure with ADF   Henning Meier-Geinitz
• [sane-devel] HP 7450C USB scanner failure with ADF   Thomas Frayne
• [sane-devel] HP 7450C USB scanner failure with ADF   m. allan noah
• [sane-devel] HP 7450C USB scanner failure with ADF   Thomas Frayne
• [sane-devel] HP 7450C USB scanner failure with ADF   Henning Meier-Geinitz
• [sane-devel] HP 7450C USB scanner failure with ADF   Thomas Frayne
• [sane-devel] HP 7450C USB scanner failure with ADF   Henning Meier-Geinitz
• [sane-devel] HP 7450C USB scanner failure with ADF   Thomas Frayne
• [sane-devel] HP 7450C USB scanner failure with ADF   Henning Meier-Geinitz
• [sane-devel] HP 7450C USB scanner failure with ADF   Rene Rebe
• [sane-devel] HP 7450C USB scanner failure with ADF   Rene Rebe
• [sane-devel] HP 7450C USB scanner failure with ADF   Thomas Frayne
• [sane-devel] HP Scanjet 2300c   Celso Pinto
• [sane-devel] HP Scanjet 2300c   Henning Meier-Geinitz
• [sane-devel] HP Scanjet 3P io errors   jd
• [sane-devel] HP Scanjet 3P io errors   abel deuring
• [sane-devel] HP ScanJet 5550C   Janez Dovc
• [sane-devel] HP ScanJet 5550C   Henning Meier-Geinitz
• [sane-devel] HP ScanJet 5550C   Janez Dovc
• [sane-devel] HP ScanJet 5550C   Henning Meier-Geinitz
• [sane-devel] HP2300C   Celso Pinto
• [sane-devel] HP2300C   Martijn van Oosterhout
• [sane-devel] HP2300C   Henning Meier-Geinitz
• [sane-devel] Logitech ClickSmart 310 help needed.   Gene Heskett
• [sane-devel] MacOS X and sm3600 backend: still crashes?   Henning Meier-Geinitz
• [sane-devel] Manufactures   david stevenson
• [sane-devel] Manufactures   Henning Meier-Geinitz
• [sane-devel] Manufactures   david stevenson
• [sane-devel] Manufactures   Henning Meier-Geinitz
• [sane-devel] Manufactures   david stevenson
• [sane-devel] messed up HP6350 USB Scanje config?   Henning Meier-Geinitz
• [sane-devel] messed up HP6350 USB Scanje config?   m. allan noah
• [sane-devel] messed up HP6350 USB Scanje config?   Henning Meier-Geinitz
• [sane-devel] messed up HP6350 USB Scanje config?   Reid Vail
• [sane-devel] Microtek Pagewiz   Peter Fales
• [sane-devel] Microtek Scanmaker 6700 (USB and FireWire)   Henning Meier-Geinitz
• [sane-devel] Microtek Scanmaker 6700 (USB and FireWire)   Alan Purchase
• [sane-devel] Microtek Scanmaker 6700 (USB and FireWire)   Alan Purchase
• [sane-devel] Microtek Scanmaker 6700 (USB and FireWire)   Henning Meier-Geinitz
• [sane-devel] Microtek SlimScan C3, output always a black image   Karsten Festag
• [sane-devel] Microtek SlimScan C3, output always a black image   Jose Sanchez
• [sane-devel] Microtek SlimScan C3, output always a black image   Karsten Festag
• [sane-devel] Microtek SlimScan C3, output always a black image   Jose Sanchez
• [sane-devel] Microtek SlimScan C3, output always a black image   Jose Sanchez
• [sane-devel] Microtek SlimScan C6 on Mac OS X 10.1.5 (sane-microtek2)   David Alan Hjelle
• [sane-devel] Microtek SlimScan C6 on Mac OS X 10.1.5 (sane-microtek2)   Henning Meier-Geinitz
• [sane-devel] Microtek SlimScan C6 on Mac OS X 10.1.5 (sane-microtek2)   Karsten Festag
• [sane-devel] multiple images on XSane   F J Brooks
• [sane-devel] multiple images on XSane   Martin Collins
• [sane-devel] multiple images on XSane   Oliver Rauch
• [sane-devel] Mustek BearPaw 2400 CU plus: now I'm totally confused (was: suddenly problems opening /dev/usbscanner0)   Christoph Bier
• [sane-devel] Mustek BearPaw 2400 CU plus: now I'm totally confused (was: suddenly problems opening /dev/usbscanner0)   Christoph Bier
• [sane-devel] Mustek BearPaw 2400 CU plus: now I'm totally confused (was: suddenly problems opening /dev/usbscanner0)   Christoph Bier
• [sane-devel] Mustek BearPaw 2400 CU plus: now I'm totally confused (was: suddenly problems opening /dev/usbscanner0)   Christoph Bier
• [sane-devel] Mustek BearPaw 2400 CU plus: now I'm totally confused (was: suddenly problems opening /dev/usbscanner0)   Henning Meier-Geinitz
• [sane-devel] Mustek BearPaw 2400 CU plus: now I'm totally confused (was: suddenly problems opening /dev/usbscanner0)   Henning Meier-Geinitz
• [sane-devel] mustek scanexpress 6000 p does not work anymore   horst.schlonz at gmx.de
• [sane-devel] mustek scanexpress 6000 p does not work anymore   horst.schlonz at gmx.de
• [sane-devel] negative-scan   Christoph Knauer
• [sane-devel] negative-scan   Karsten Festag
• [sane-devel] New sanei_pa4s2 in cvs   Jochen Eisinger
• [sane-devel] New sanei_pa4s2 in cvs   Julien BLACHE
• [sane-devel] New sanei_pa4s2 in cvs   Jochen Eisinger
• [sane-devel] page orientation for adfHow do I set my scanner   Randolph Jones
• [sane-devel] page orientation for adfHow do I set my scanner   abel deuring
• [sane-devel] page orientation for adfHow do I set my scanner   m. allan noah
• [sane-devel] Please let me know frontend which operates on "MacOS X".   hironori kohno
• [sane-devel] Please let me know frontend which operates on "MacOS X".   Michael Herder
• [sane-devel] Please let me know frontend which operates on"MacOS X".   hironori kohno
• [sane-devel] Please test sane-backends (and sane-frontends) on non-mainstream os and platforms   Henning Meier-Geinitz
• [sane-devel] Please test: changed handling of list of backends   Henning Meier-Geinitz
• [sane-devel] Please test: changed handling of list of backends   Thomas Soumarmon
• [sane-devel] Problem building on OSX   Peter Howard
• [sane-devel] Problem building on OSX   Henning Meier-Geinitz
• [sane-devel] Problem building on OSX   Peter O'Gorman
• [sane-devel] Problem building on OSX   Peter Howard
• [sane-devel] Problem building on OSX   Henning Meier-Geinitz
• [sane-devel] Problem building on OSX   khk at khk.net
• [sane-devel] Problem building on OSX   Henning Meier-Geinitz
• [sane-devel] Problem building on OSX   khk at khk.net
• [sane-devel] Problem building on OSX   Dino Tang
• [sane-devel] Problem building on OSX   abel deuring
• [sane-devel] Problem building on OSX   Dino Tang
• [sane-devel] problem with UMAX 2000P printer   aneesh m raj
• [sane-devel] problem with UMAX 2000P printer   Henning Meier-Geinitz
• [sane-devel] problem with UMAX 2000P printer   stef
• [sane-devel] problem with UMAX 2000P scanner   aneesh m raj
• [sane-devel] problem with UMAX 2000P scanner   Henning Meier-Geinitz
• [sane-devel] problem with UMAX 2000P scanner   aneesh m raj
• [sane-devel] problem with UMAX 2000P scanner   aneesh m raj
• [sane-devel] problem with UMAX 2000P scanner   stef
• [sane-devel] Problems with the canon backend for a canoscan 2700F.   Sigurd Stordal
• [sane-devel] Problems with the canon backend for a canoscan 2700F.   Henning Meier-Geinitz
• [sane-devel] Problems with the canon backend for a canoscan 2700F.   Sigurd Stordal
• [sane-devel] Problems with the Canoscan 2700F   Ulrich Deiters
• [sane-devel] Proposal: Change of the backend and model status strings   Henning Meier-Geinitz
• [sane-devel] Proposal: Change of the backend and model status strings   david stevenson
• [sane-devel] Proposal: Change of the backend and model status strings   Henning Meier-Geinitz
• [sane-devel] Proposal: Change of the backend and model status strings   Henning Meier-Geinitz
• [sane-devel] Query   Homer
• [sane-devel] Query   Henning Meier-Geinitz
• [sane-devel] Query   Matthew Duggan
• [sane-devel] Re: [sane-devel]The report about 'sane-fujitsu'   hironori kohno
• [sane-devel] Re: epson: scanimage threshold option not working in 1.0.12 backend   Peter Santoro
• [sane-devel] Re: epson: scanimage threshold option not working in 1.0.12 backend (Peter Santoro)   Peter Santoro
• [sane-devel] Re: fujitsu patch, was: The report about 'sane-fujitsu'   m. allan noah
• [sane-devel] Re: Nikon Coolscan IV and scanner.c funky result -75   Major A
• [sane-devel] Re: Nikon Coolscan IV and scanner.c funky result -75   Henning Meier-Geinitz
• [sane-devel] Re: Nikon Coolscan IV and scanner.c funky result -75   Major A
• [sane-devel] Re: Nikon Coolscan IV and scanner.c funky result -75   Henning Meier-Geinitz
• [sane-devel] Re: Sane support for Acer parallel port scanners   mrjaneway at gmx.net
• [sane-devel] Re: Sane-devel digest, Vol 1 #473 - 6 msgs   Dino Tang
• [sane-devel] Re: Sane-devel digest, Vol 1 #503 - 1 msg   Jeffery C. May
• [sane-devel] Re: Sane-devel digest, Vol 1 #503 - 1 msg   Henning Meier-Geinitz
• [sane-devel] Re: Sane-devel digest, Vol 1 #503 - 1 msg   Oliver Schwartz
• [sane-devel] Re: Visioneer 5800   jollyprince at juno.com
• [sane-devel] Re: Visioneer 5800   jollyprince at juno.com
• [sane-devel] Re: Visioneer 5800   Henning Meier-Geinitz
• [sane-devel] Redhat 9 and XSane .89   Philip M Dunton
• [sane-devel] Redhat 9 and XSane .89   Henning Meier-Geinitz
• [sane-devel] Redhat 9 and XSane .89   Tim Waugh
• [sane-devel] Redhat 9 and XSane .89   Henning Meier-Geinitz
• [sane-devel] Revscan 19200i   Petr Felenda
• [sane-devel] Revscan 19200i   Henning Meier-Geinitz
• [sane-devel] Sane support for Acer parallel port scanners   mrjaneway at gmx.net
• [sane-devel] Sane support for Acer parallel port scanners   Henning Meier-Geinitz
• [sane-devel] Sane support for Acer parallel port scanners   Oliver Schwartz
• [sane-devel] sane-find-scanner can find my scanner, but Xsane can't?   Christoffer Holm Kjølbæk
• [sane-devel] sane-find-scanner can find my scanner, but Xsane can't?   Henning Meier-Geinitz
• [sane-devel] scanimage and scanadf command line args   Peter Santoro
• [sane-devel] scanimage and scanadf command line args   m. allan noah
• [sane-devel] scanimage and scanadf command line args   Peter Santoro
• [sane-devel] scanimage and scanadf command line args   Henning Meier-Geinitz
• [sane-devel] ScanJet 4100C   Lee Morgan
• [sane-devel] ScanJet 4100C   Peter Kirchgessner
• [sane-devel] ScanJet 5300C question   Matt Lung
• [sane-devel] ScanJet 5300C question   Thomas Frayne
• [sane-devel] ScanJet 5300C question   Rene Rebe
• [sane-devel] Scanner Genius CP HR6X - EPP -> It works!   Cadu
• [sane-devel] Scanner Genius CP HR6X - EPP -> It works!   Jaeger, Gerhard
• [sane-devel] scanner recommendation   Ayman Haidar
• [sane-devel] scheme interface for sane?   Peter Santoro
• [sane-devel] Scsi problem with Solaris 2.6   Henrik Schmidt
• [sane-devel] Scsi problem with Solaris 2.6   Henning Meier-Geinitz
• [sane-devel] Scsi problem with Solaris 2.6   Henrik Schmidt
• [sane-devel] Scsi problem with Solaris 2.6   abel deuring
• [sane-devel] Scsi problem with Solaris 2.6   Henrik Schmidt
• [sane-devel] Scsi problem with Solaris 2.6   Matto Marjanovic
• [sane-devel] Second draft of Scanner HOWTO for TLDP   Howard Shane
• [sane-devel] Second draft of Scanner HOWTO for TLDP   Jochen Eisinger
• [sane-devel] Second draft of Scanner HOWTO for TLDP   m. allan noah
• [sane-devel] Second draft of Scanner HOWTO for TLDP   Laurent-jan
• [sane-devel] Second draft of Scanner HOWTO for TLDP   Henning Meier-Geinitz
• [sane-devel] Second draft of Scanner HOWTO for TLDP   Howard Shane
• [sane-devel] Second draft of Scanner HOWTO for TLDP   Henning Meier-Geinitz
• [sane-devel] Second draft of Scanner HOWTO for TLDP   Till Kamppeter
• [sane-devel] Second draft of Scanner HOWTO for TLDP   Howard Shane
• [sane-devel] Second draft of Scanner HOWTO for TLDP   Henning Meier-Geinitz
• [sane-devel] Second draft of Scanner HOWTO for TLDP   Howard Shane
• [sane-devel] Second draft of Scanner HOWTO for TLDP   Henning Meier-Geinitz
• [sane-devel] suddenly problems opening /dev/usbscanner0   Christoph Bier
• [sane-devel] The format of data after sane_read()   aneesh m raj
• [sane-devel] The format of data after sane_read()   Henning Meier-Geinitz
• [sane-devel] Timeouts with UHCI and gt68xx based scanners in sane-backends 1.0.12   Christoph Bier
• [sane-devel] Timeouts with UHCI and gt68xx based scanners in sane-backends 1.0.12   Henning Meier-Geinitz
• [sane-devel] Timeouts with UHCI and gt68xx based scanners in sane-backends 1.0.12   Michael Fleming
• [sane-devel] Timeouts with UHCI and gt68xx based scanners in sane-backends 1.0.12   Henning Meier-Geinitz
• [sane-devel] Timeouts with UHCI and gt68xx based scanners in sane-backends 1.0.12   Michael Fleming
• [sane-devel] Tips on migrating an existing driver to use libusb?   Steven Ellis
• [sane-devel] Tips on migrating an existing driver to use libusb?   Henning Meier-Geinitz
• [sane-devel] TWAIN on SANE   priya
• [sane-devel] TWAIN on SANE   Henning Meier-Geinitz
• [sane-devel] TWAIN on SANE   Stephen Williams
• [sane-devel] TWAIN on SANE   Brian K. White
• [sane-devel] umax 2200 scsi no go under SuSE-8.2   fsanta
• [sane-devel] umax 2200 scsi no go under SuSE-8.2   Henning Meier-Geinitz
• [sane-devel] umax 2200 scsi no go under SuSE-8.2   fsanta
• [sane-devel] umax 2200 scsi no go under SuSE-8.2   Henning Meier-Geinitz
• [sane-devel] umax 2200 scsi no go under SuSE-8.2   fsanta
• [sane-devel] umax 2200 scsi no go under SuSE-8.2   fsanta
• [sane-devel] umax 2200 scsi no go under SuSE-8.2   Henning Meier-Geinitz
• [sane-devel] umax 2200 scsi no go under SuSE-8.2   abel deuring
• [sane-devel] umax 2200 scsi no go under SuSE-8.2   fsanta
• [sane-devel] umax 2200 scsi no go under SuSE-8.2   Henning Meier-Geinitz
• [sane-devel] UMAX Astra 2200 USB weirdness   ope
• [sane-devel] UMAX Astra 2200 USB weirdness   Klaus Dahlke
• [sane-devel] UMAX Astra 2200 USB weirdness   Oliver Rauch
• [sane-devel] UMAX Astra 2200 USB weirdness   ope
• [sane-devel] UMAX Astra 2200 USB weirdness   Oliver Rauch
• [sane-devel] UMAX Astra 2200 USB weirdness   ope
• [sane-devel] UMAX Astra 2200 USB weirdness   ope
• [sane-devel] UMAX Astra 2200 USB weirdness   Oliver Rauch
• [sane-devel] UMAX Astra 2200 USB weirdness   ope
• [sane-devel] Video4linux   Novak Levente
• [sane-devel] Video4linux   Henning Meier-Geinitz
• [sane-devel] Video4linux   Julien BLACHE
• [sane-devel] Video4linux   Novak Levente
• [sane-devel] Visioneer 5800   jollyprince at juno.com
• [sane-devel] Visioneer 5800   Martijn van Oosterhout
• [sane-devel] Visioneer 5800   Henning Meier-Geinitz
• [sane-devel] Visioneer 5800   Steven Ellis
• [sane-devel] Visioneer 5800 backend   jollyprince at juno.com
• [sane-devel] Visioneer 5800 backend   Henning Meier-Geinitz
• [sane-devel] Well, Duh...   Jeffery C. May
• [sane-devel] What next?   jollyprince at juno.com
• [sane-devel] What next?   Henning Meier-Geinitz
• [sane-devel] What next?   Henning Meier-Geinitz
• [sane-devel] What next?   Henning Meier-Geinitz
• [sane-devel] What next?   Roger O Wales
• [sane-devel] What next?   Henning Meier-Geinitz
• [sane-devel] WinXP problem   Ken Moffat
• [sane-devel] WinXP problem   Oliver Rauch
• [sane-devel] XSane 0.90: Missing gettext produces hard to understand error-message when compiling   Gerfried Maier
• [sane-devel] ADF support for HP7450C   TomF
• [sane-devel] Analysis of saned CPU utilization   Jay Guerette
• [sane-devel] Analysis of saned CPU utilization   Julien BLACHE
• [sane-devel] Analysis of saned CPU utilization   Jay Guerette
• [sane-devel] ANNOUNCE: GTK Application for troubleshooting SANE problems   Henning Meier-Geinitz
• [sane-devel] Announcing Scanner-HOWTO at tldp.org   Howard Shane
• [sane-devel] Announcing Scanner-HOWTO at tldp.org   Henning Meier-Geinitz
• [sane-devel] Announcing Scanner-HOWTO at tldp.org   stef
• [sane-devel] Announcing Scanner-HOWTO at tldp.org   Karsten Festag
• [sane-devel] Announcing Scanner-HOWTO at tldp.org   Gerhard Jaeger
• [sane-devel] any drivers do software calibration?   m. allan noah
• [sane-devel] any drivers do software calibration?   Henning Meier-Geinitz
• [sane-devel] any drivers do software calibration?   m. allan noah
• [sane-devel] any scanner drivers that will work with twian compliant digital cams?   technomage
• [sane-devel] any scanner drivers that will work with twian compliant digital cams?   Henning Meier-Geinitz
• [sane-devel] any scanner drivers that will work with twian compliant digital cams?   Peter Fales
• [sane-devel] Any umax persons still on the list?   fsanta
• [sane-devel] Any umax persons still on the list?   Henning Meier-Geinitz
• [sane-devel] Any umax persons still on the list?   Oliver Rauch
• [sane-devel] avision: ADF support for HP7450C   Henning Meier-Geinitz
• [sane-devel] Avision backend trouble (?) (was: multiple images on XSane)   Henning Meier-Geinitz
• [sane-devel] backends 1.0.12 compile-error   Gerfried Maier
• [sane-devel] backends 1.0.12 compile-error   Martijn van Oosterhout
• [sane-devel] backends 1.0.12 compile-error   Gerfried Maier
• [sane-devel] backends 1.0.12 compile-error   Julien BLACHE
• [sane-devel] backends 1.0.12 compile-error   Erik Inge Bolsø
• [sane-devel] backends 1.0.12 compile-error   Thomas Soumarmon
• [sane-devel] backends 1.0.12 compile-error   Henning Meier-Geinitz
• [sane-devel] backends 1.0.12 compile-error   Gerfried Maier
• [sane-devel] backends 1.0.12 compile-error   Gerfried Maier
• [sane-devel] backends 1.0.12 compile-error   Gerfried Maier
• [sane-devel] backends 1.0.12 compile-error   Erik Inge Bolsø
• [sane-devel] backends 1.0.12 compile-error   Erik Inge Bolsø
• [sane-devel] backends 1.0.12 compile-error   Gerfried Maier
• [sane-devel] backends 1.0.12 compile-error   Gerfried Maier
• [sane-devel] backends 1.0.12 compile-error   Julien BLACHE
• [sane-devel] Canon CS 8000F, USB and VMWare   Sergey Berezin
• [sane-devel] Canon CS 8000F, USB and VMWare   Henning Meier-Geinitz
• [sane-devel] Canon Lide 30 backend   Michael Rasile
• [sane-devel] Canon Lide 30 backend   Henning Meier-Geinitz
• [sane-devel] Canon Lide 30 backend   Henning Meier-Geinitz
• [sane-devel] Canon Lide 30 backend   Michael Rasile
• [sane-devel] Canon Lide 30 backend   Henning Meier-Geinitz
• [sane-devel] Canon Lide 30 backend   Jaeger, Gerhard
• [sane-devel] Canoscan D646U???   Philip
• [sane-devel] Canoscan D646U???   Henning Meier-Geinitz
• [sane-devel] compile 1.0.12 on OS/2   Franz Bakan
• [sane-devel] compile 1.0.12 on OS/2   Henning Meier-Geinitz
• [sane-devel] Compiling SANE backends on Mac OS X 10.1.5   David Alan Hjelle
• [sane-devel] Compiling SANE backends on Mac OS X 10.1.5   Frank Zago
• [sane-devel] Compiling SANE backends on Mac OS X 10.1.5   Henning Meier-Geinitz
• [sane-devel] CVS freeze ?   Thomas Soumarmon
• [sane-devel] CVS freeze ?   Julien BLACHE
• [sane-devel] CVS freeze ?   Henning Meier-Geinitz
• [sane-devel] CVS freeze ?   Henning Meier-Geinitz
• [sane-devel] Czech translation   Michael Herder
• [sane-devel] Device description format changed in CVS (.desc files)   Henning Meier-Geinitz
• [sane-devel] epson: scanimage threshold option not working in 1.0.12 backend   Peter Santoro
• [sane-devel] epson: scanimage threshold option not working in 1.0.12 backend   Karl Heinz Kremer
• [sane-devel] Re: epson: scanimage threshold option not working in 1.0.12 backend   Peter Santoro
• [sane-devel] Re: epson: scanimage threshold option not working in 1.0.12 backend (Peter Santoro)   Peter Santoro
• [sane-devel] Epson perfection 660 ->Problem building on OSX   Brian D. Williams
• [sane-devel] Epson perfection 660 ->Problem building on OSX   Henning Meier-Geinitz
• [sane-devel] Epson perfection 660 ->Problem building on OSX   Brian D. Williams
• [sane-devel] Epson perfection 660 ->Problem building on OSX   Henning Meier-Geinitz
• [sane-devel] Epson perfection 660 ->Problem building on OSX   Brian D. Williams
• [sane-devel] Epson perfection 660 ->Problem building on OSX   Dino Tang
• [sane-devel] Epson perfection 660 ->Problem building on OSX   Henning Meier-Geinitz
• [sane-devel] Epson perfection 660 ->Problem building on OSX   Peter Howard
• [sane-devel] Epson perfection 660 ->Problem building on OSX   Brian D. Williams
• [sane-devel] Epson perfection 660 ->Problem building on OSX   Oliver Schwartz
• [sane-devel] error in linux/videodev.h   Thomas Soumarmon
• [sane-devel] error in linux/videodev.h   Henning Meier-Geinitz
• [sane-devel] error in linux/videodev.h   Thomas Soumarmon
• [sane-devel] error in linux/videodev.h   Henning Meier-Geinitz
• [sane-devel] error in linux/videodev.h   Thomas Soumarmon
• [sane-devel] error in linux/videodev.h   Henning Meier-Geinitz
• [sane-devel] FreeBSD and Microtek Scanmaker II   Nakal
• [sane-devel] FreeBSD and Microtek Scanmaker II   Henning Meier-Geinitz
• [sane-devel] FreeBSD and Microtek Scanmaker II   Nakal
• [sane-devel] FreeBSD and Microtek Scanmaker II   abel deuring
• [sane-devel] FreeBSD and Microtek Scanmaker II   Nakal
• [sane-devel] FreeBSD and Microtek Scanmaker II   abel deuring
• [sane-devel] FreeBSD and Microtek Scanmaker II   Nakal
• [sane-devel] FreeBSD and Microtek Scanmaker II   abel deuring
• [sane-devel] FreeBSD and Microtek Scanmaker II   Nakal
• [sane-devel] FreeBSD and Microtek Scanmaker II   abel deuring
• [sane-devel] FreeBSD and Microtek Scanmaker II   Nakal
• [sane-devel] FreeBSD and Microtek Scanmaker II   abel deuring
• [sane-devel] FreeBSD and Microtek Scanmaker II   Nakal
• [sane-devel] FreeBSD and Microtek Scanmaker II   abel deuring
• [sane-devel] FreeBSD and Microtek Scanmaker II   Matto Marjanovic
• [sane-devel] FreeBSD and Microtek Scanmaker II   Nakal
• [sane-devel] FreeBSD and Microtek Scanmaker II   abel deuring
• [sane-devel] FreeBSD and Microtek Scanmaker II   abel deuring
• [sane-devel] FreeBSD and Microtek Scanmaker II   Henning Meier-Geinitz
• [sane-devel] FreeBSD and Microtek Scanmaker II   abel deuring
• [sane-devel] FreeBSD and Microtek Scanmaker II   Nakal
• [sane-devel] FreeBSD and Microtek Scanmaker II   abel deuring
• [sane-devel] FreeBSD and Microtek Scanmaker II   Matto Marjanovic
• [sane-devel] FreeBSD and Microtek Scanmaker II   abel deuring
• [sane-devel] FreeBSD and Microtek Scanmaker II   Henning Meier-Geinitz
• [sane-devel] FreeBSD and Microtek Scanmaker II   Matto Marjanovic
• [sane-devel] FreeBSD and Microtek Scanmaker II   abel deuring
• [sane-devel] FreeBSD and Microtek Scanmaker II   abel deuring
• [sane-devel] FreeBSD and Microtek Scanmaker II   Nakal
• [sane-devel] FreeBSD and Microtek Scanmaker II   Matto Marjanovic
• [sane-devel] FreeBSD and Microtek Scanmaker II   abel deuring
• [sane-devel] FreeBSD and Microtek Scanmaker II   Matto Marjanovic
• [sane-devel] FreeBSD and Microtek Scanmaker II   abel deuring
• [sane-devel] Re: fujitsu patch, was: The report about 'sane-fujitsu'   m. allan noah
• [sane-devel] Fw: RTS8801C2 Serial Number Chipset   jollyprince at juno.com
• [sane-devel] Fw: RTS8801C2 Serial Number Chipset   Henning Meier-Geinitz
• [sane-devel] Fw: RTS8801C2 Serial Number Chipset   jollyprince at juno.com
• [sane-devel] Genius Vivid-3xe   Renito 73
• [sane-devel] Genius Vivid-3xe   Michael Fleming
• [sane-devel] Genius Vivid-3xe part II   Renito 73
• [sane-devel] Genius Vivid-3xe part II   Henning Meier-Geinitz
• [sane-devel] hi!   gnawa
• [sane-devel] hi!   Henning Meier-Geinitz
• [sane-devel] hi!   gnawa
• [sane-devel] HP2300C   Celso Pinto
• [sane-devel] HP2300C   Martijn van Oosterhout
• [sane-devel] HP2300C   Henning Meier-Geinitz
• [sane-devel] HP 7450C ... addendum   Thomas Frayne
• [sane-devel] HP 7450C ... addendum   Rene Rebe
• [sane-devel] HP 7450C ... addendum   Thomas Frayne
• [sane-devel] HP 7450C USB scanner failure with ADF   TomF
• [sane-devel] HP 7450C USB scanner failure with ADF   Jose Paulo Moitinho de Almeida
• [sane-devel] HP 7450C USB scanner failure with ADF   Jose Paulo Moitinho de Almeida
• [sane-devel] HP 7450C USB scanner failure with ADF   TomF
• [sane-devel] HP 7450C USB scanner failure with ADF   Henning Meier-Geinitz
• [sane-devel] HP 7450C USB scanner failure with ADF   Thomas Frayne
• [sane-devel] HP 7450C USB scanner failure with ADF   m. allan noah
• [sane-devel] HP 7450C USB scanner failure with ADF   Thomas Frayne
• [sane-devel] HP 7450C USB scanner failure with ADF   Henning Meier-Geinitz
• [sane-devel] HP 7450C USB scanner failure with ADF   Thomas Frayne
• [sane-devel] HP 7450C USB scanner failure with ADF   Henning Meier-Geinitz
• [sane-devel] HP 7450C USB scanner failure with ADF   Thomas Frayne
• [sane-devel] HP 7450C USB scanner failure with ADF   Henning Meier-Geinitz
• [sane-devel] HP 7450C USB scanner failure with ADF   Rene Rebe
• [sane-devel] HP 7450C USB scanner failure with ADF   Rene Rebe
• [sane-devel] HP 7450C USB scanner failure with ADF   Thomas Frayne
• [sane-devel] HP Scanjet 2300c   Celso Pinto
• [sane-devel] HP Scanjet 2300c   Henning Meier-Geinitz
• [sane-devel] HP Scanjet 3P io errors   jd
• [sane-devel] HP Scanjet 3P io errors   abel deuring
• [sane-devel] HP ScanJet 5550C   Janez Dovc
• [sane-devel] HP ScanJet 5550C   Henning Meier-Geinitz
• [sane-devel] HP ScanJet 5550C   Janez Dovc
• [sane-devel] HP ScanJet 5550C   Henning Meier-Geinitz
• [sane-devel] Logitech ClickSmart 310 help needed.   Gene Heskett
• [sane-devel] MacOS X and sm3600 backend: still crashes?   Henning Meier-Geinitz
• [sane-devel] Manufactures   david stevenson
• [sane-devel] Manufactures   Henning Meier-Geinitz
• [sane-devel] Manufactures   david stevenson
• [sane-devel] Manufactures   Henning Meier-Geinitz
• [sane-devel] Manufactures   david stevenson
• [sane-devel] messed up HP6350 USB Scanje config?   Henning Meier-Geinitz
• [sane-devel] messed up HP6350 USB Scanje config?   m. allan noah
• [sane-devel] messed up HP6350 USB Scanje config?   Henning Meier-Geinitz
• [sane-devel] messed up HP6350 USB Scanje config?   Reid Vail
• [sane-devel] Microtek Pagewiz   Peter Fales
• [sane-devel] Microtek Scanmaker 6700 (USB and FireWire)   Henning Meier-Geinitz
• [sane-devel] Microtek Scanmaker 6700 (USB and FireWire)   Alan Purchase
• [sane-devel] Microtek Scanmaker 6700 (USB and FireWire)   Alan Purchase
• [sane-devel] Microtek Scanmaker 6700 (USB and FireWire)   Henning Meier-Geinitz
• [sane-devel] Microtek SlimScan C3, output always a black image   Karsten Festag
• [sane-devel] Microtek SlimScan C3, output always a black image   Jose Sanchez
• [sane-devel] Microtek SlimScan C3, output always a black image   Karsten Festag
• [sane-devel] Microtek SlimScan C3, output always a black image   Jose Sanchez
• [sane-devel] Microtek SlimScan C3, output always a black image   Jose Sanchez
• [sane-devel] Microtek SlimScan C6 on Mac OS X 10.1.5 (sane-microtek2)   David Alan Hjelle
• [sane-devel] Microtek SlimScan C6 on Mac OS X 10.1.5 (sane-microtek2)   Henning Meier-Geinitz
• [sane-devel] Microtek SlimScan C6 on Mac OS X 10.1.5 (sane-microtek2)   Karsten Festag
• [sane-devel] multiple images on XSane   F J Brooks
• [sane-devel] multiple images on XSane   Martin Collins
• [sane-devel] multiple images on XSane   Oliver Rauch
• [sane-devel] Mustek BearPaw 2400 CU plus: now I'm totally confused (was: suddenly problems opening /dev/usbscanner0)   Christoph Bier
• [sane-devel] Mustek BearPaw 2400 CU plus: now I'm totally confused (was: suddenly problems opening /dev/usbscanner0)   Henning Meier-Geinitz
• [sane-devel] Mustek BearPaw 2400 CU plus: now I'm totally confused (was: suddenly problems opening /dev/usbscanner0)   Christoph Bier
• [sane-devel] Mustek BearPaw 2400 CU plus: now I'm totally confused (was: suddenly problems opening /dev/usbscanner0)   Christoph Bier
• [sane-devel] Mustek BearPaw 2400 CU plus: now I'm totally confused (was: suddenly problems opening /dev/usbscanner0)   Henning Meier-Geinitz
• [sane-devel] Mustek BearPaw 2400 CU plus: now I'm totally confused (was: suddenly problems opening /dev/usbscanner0)   Christoph Bier
• [sane-devel] mustek scanexpress 6000 p does not work anymore   horst.schlonz at gmx.de
• [sane-devel] mustek scanexpress 6000 p does not work anymore   horst.schlonz at gmx.de
• [sane-devel] negative-scan   Christoph Knauer
• [sane-devel] negative-scan   Karsten Festag
• [sane-devel] New sanei_pa4s2 in cvs   Jochen Eisinger
• [sane-devel] New sanei_pa4s2 in cvs   Julien BLACHE
• [sane-devel] New sanei_pa4s2 in cvs   Jochen Eisinger
• [sane-devel] Re: Nikon Coolscan IV and scanner.c funky result -75   Major A
• [sane-devel] Re: Nikon Coolscan IV and scanner.c funky result -75   Henning Meier-Geinitz
• [sane-devel] Re: Nikon Coolscan IV and scanner.c funky result -75   Major A
• [sane-devel] Re: Nikon Coolscan IV and scanner.c funky result -75   Henning Meier-Geinitz
• [sane-devel] page orientation for adfHow do I set my scanner   Randolph Jones
• [sane-devel] page orientation for adfHow do I set my scanner   abel deuring
• [sane-devel] page orientation for adfHow do I set my scanner   m. allan noah
• [sane-devel] Please let me know frontend which operates on "MacOS X".   hironori kohno
• [sane-devel] Please let me know frontend which operates on "MacOS X".   Michael Herder
• [sane-devel] Please let me know frontend which operates on"MacOS X".   hironori kohno
• [sane-devel] Please test: changed handling of list of backends   Henning Meier-Geinitz
• [sane-devel] Please test: changed handling of list of backends   Thomas Soumarmon
• [sane-devel] Please test sane-backends (and sane-frontends) on non-mainstream os and platforms   Henning Meier-Geinitz
• [sane-devel] Problem building on OSX   Peter Howard
• [sane-devel] Problem building on OSX   Henning Meier-Geinitz
• [sane-devel] Problem building on OSX   Peter O'Gorman
• [sane-devel] Problem building on OSX   Peter Howard
• [sane-devel] Problem building on OSX   Henning Meier-Geinitz
• [sane-devel] Problem building on OSX   khk at khk.net
• [sane-devel] Problem building on OSX   Henning Meier-Geinitz
• [sane-devel] Problem building on OSX   khk at khk.net
• [sane-devel] Problem building on OSX   Dino Tang
• [sane-devel] Problem building on OSX   abel deuring
• [sane-devel] Problem building on OSX   Dino Tang
• [sane-devel] Problems with the canon backend for a canoscan 2700F.   Sigurd Stordal
• [sane-devel] Problems with the canon backend for a canoscan 2700F.   Henning Meier-Geinitz
• [sane-devel] Problems with the canon backend for a canoscan 2700F.   Sigurd Stordal
• [sane-devel] Problems with the Canoscan 2700F   Ulrich Deiters
• [sane-devel] problem with UMAX 2000P printer   aneesh m raj
• [sane-devel] problem with UMAX 2000P printer   Henning Meier-Geinitz
• [sane-devel] problem with UMAX 2000P printer   stef
• [sane-devel] problem with UMAX 2000P scanner   aneesh m raj
• [sane-devel] problem with UMAX 2000P scanner   Henning Meier-Geinitz
• [sane-devel] problem with UMAX 2000P scanner   aneesh m raj
• [sane-devel] problem with UMAX 2000P scanner   aneesh m raj
• [sane-devel] problem with UMAX 2000P scanner   stef
• [sane-devel] Proposal: Change of the backend and model status strings   Henning Meier-Geinitz
• [sane-devel] Proposal: Change of the backend and model status strings   david stevenson
• [sane-devel] Proposal: Change of the backend and model status strings   Henning Meier-Geinitz
• [sane-devel] Proposal: Change of the backend and model status strings   Henning Meier-Geinitz
• [sane-devel] Query   Homer
• [sane-devel] Query   Henning Meier-Geinitz
• [sane-devel] Query   Matthew Duggan
• [sane-devel] Redhat 9 and XSane .89   Philip M Dunton
• [sane-devel] Redhat 9 and XSane .89   Henning Meier-Geinitz
• [sane-devel] Redhat 9 and XSane .89   Tim Waugh
• [sane-devel] Redhat 9 and XSane .89   Henning Meier-Geinitz
• [sane-devel] Revscan 19200i   Petr Felenda
• [sane-devel] Revscan 19200i   Henning Meier-Geinitz
• [sane-devel] Re: Sane-devel digest, Vol 1 #473 - 6 msgs   Dino Tang
• [sane-devel] Re: Sane-devel digest, Vol 1 #503 - 1 msg   Jeffery C. May
• [sane-devel] Re: Sane-devel digest, Vol 1 #503 - 1 msg   Henning Meier-Geinitz
• [sane-devel] Re: Sane-devel digest, Vol 1 #503 - 1 msg   Oliver Schwartz
• [sane-devel] sane-find-scanner can find my scanner, but Xsane can't?   Christoffer Holm Kjølbæk
• [sane-devel] sane-find-scanner can find my scanner, but Xsane can't?   Henning Meier-Geinitz
• SV: [sane-devel] sane-find-scanner can find my scanner, but Xsane can't?   Christoffer Holm Kjølbæk
• [sane-devel] Sane support for Acer parallel port scanners   mrjaneway at gmx.net
• [sane-devel] Sane support for Acer parallel port scanners   Henning Meier-Geinitz
• [sane-devel] Sane support for Acer parallel port scanners   Oliver Schwartz
• [sane-devel] Re: Sane support for Acer parallel port scanners   mrjaneway at gmx.net
• [sane-devel] scanimage and scanadf command line args   Peter Santoro
• [sane-devel] scanimage and scanadf command line args   m. allan noah
• [sane-devel] scanimage and scanadf command line args   Peter Santoro
• [sane-devel] scanimage and scanadf command line args   Henning Meier-Geinitz
• [sane-devel] ScanJet 4100C   Lee Morgan
• [sane-devel] ScanJet 4100C   Peter Kirchgessner
• [sane-devel] ScanJet 5300C question   Matt Lung
• [sane-devel] ScanJet 5300C question   Thomas Frayne
• [sane-devel] ScanJet 5300C question   Rene Rebe
• [sane-devel] Scanner Genius CP HR6X - EPP -> It works!   Cadu
• [sane-devel] Scanner Genius CP HR6X - EPP -> It works!   Jaeger, Gerhard
• [sane-devel] scanner recommendation   Ayman Haidar
• [sane-devel] scheme interface for sane?   Peter Santoro
• [sane-devel] Scsi problem with Solaris 2.6   Henrik Schmidt
• [sane-devel] Scsi problem with Solaris 2.6   Henning Meier-Geinitz
• [sane-devel] Scsi problem with Solaris 2.6   Henrik Schmidt
• [sane-devel] Scsi problem with Solaris 2.6   abel deuring
• [sane-devel] Scsi problem with Solaris 2.6   Henrik Schmidt
• [sane-devel] Scsi problem with Solaris 2.6   Matto Marjanovic
• [sane-devel] Second draft of Scanner HOWTO for TLDP   Howard Shane
• [sane-devel] Second draft of Scanner HOWTO for TLDP   Jochen Eisinger
• [sane-devel] Second draft of Scanner HOWTO for TLDP   m. allan noah
• [sane-devel] Second draft of Scanner HOWTO for TLDP   Laurent-jan
• [sane-devel] Second draft of Scanner HOWTO for TLDP   Henning Meier-Geinitz
• [sane-devel] Second draft of Scanner HOWTO for TLDP   Howard Shane
• [sane-devel] Second draft of Scanner HOWTO for TLDP   Henning Meier-Geinitz
• [sane-devel] Second draft of Scanner HOWTO for TLDP   Till Kamppeter
• [sane-devel] Second draft of Scanner HOWTO for TLDP   Howard Shane
• [sane-devel] Second draft of Scanner HOWTO for TLDP   Henning Meier-Geinitz
• [sane-devel] Second draft of Scanner HOWTO for TLDP   Howard Shane
• [sane-devel] Second draft of Scanner HOWTO for TLDP   Henning Meier-Geinitz
• [sane-devel] suddenly problems opening /dev/usbscanner0   Christoph Bier
• SV: [sane-devel] sane-find-scanner can find my scanner, but Xsane can't?   Christoffer Holm Kjølbæk
• [sane-devel] The format of data after sane_read()   aneesh m raj
• [sane-devel] The format of data after sane_read()   Henning Meier-Geinitz
• [sane-devel] [sane-devel]The report about 'sane-fujitsu'   hironori kohno
• [sane-devel] [sane-devel]The report about 'sane-fujitsu'   m. allan noah
• [sane-devel] Re: [sane-devel]The report about 'sane-fujitsu'   hironori kohno
• [sane-devel] Timeouts with UHCI and gt68xx based scanners in sane-backends 1.0.12   Henning Meier-Geinitz
• [sane-devel] Timeouts with UHCI and gt68xx based scanners in sane-backends 1.0.12   Christoph Bier
• [sane-devel] Timeouts with UHCI and gt68xx based scanners in sane-backends 1.0.12   Michael Fleming
• [sane-devel] Timeouts with UHCI and gt68xx based scanners in sane-backends 1.0.12   Henning Meier-Geinitz
• [sane-devel] Timeouts with UHCI and gt68xx based scanners in sane-backends 1.0.12   Michael Fleming
• [sane-devel] Tips on migrating an existing driver to use libusb?   Steven Ellis
• [sane-devel] Tips on migrating an existing driver to use libusb?   Henning Meier-Geinitz
• [sane-devel] TWAIN on SANE   priya
• [sane-devel] TWAIN on SANE   Henning Meier-Geinitz
• [sane-devel] TWAIN on SANE   Stephen Williams
• [sane-devel] TWAIN on SANE   Brian K. White
• [sane-devel] umax 2200 scsi no go under SuSE-8.2   fsanta
• [sane-devel] umax 2200 scsi no go under SuSE-8.2   Henning Meier-Geinitz
• [sane-devel] umax 2200 scsi no go under SuSE-8.2   fsanta
• [sane-devel] umax 2200 scsi no go under SuSE-8.2   Henning Meier-Geinitz
• [sane-devel] umax 2200 scsi no go under SuSE-8.2   fsanta
• [sane-devel] umax 2200 scsi no go under SuSE-8.2   fsanta
• [sane-devel] umax 2200 scsi no go under SuSE-8.2   Henning Meier-Geinitz
• [sane-devel] umax 2200 scsi no go under SuSE-8.2   abel deuring
• [sane-devel] umax 2200 scsi no go under SuSE-8.2   fsanta
• [sane-devel] umax 2200 scsi no go under SuSE-8.2   Henning Meier-Geinitz
• [sane-devel] UMAX Astra 2200 USB weirdness   ope
• [sane-devel] UMAX Astra 2200 USB weirdness   Klaus Dahlke
• [sane-devel] UMAX Astra 2200 USB weirdness   Oliver Rauch
• [sane-devel] UMAX Astra 2200 USB weirdness   ope
• [sane-devel] UMAX Astra 2200 USB weirdness   Oliver Rauch
• [sane-devel] UMAX Astra 2200 USB weirdness   ope
• [sane-devel] UMAX Astra 2200 USB weirdness   ope
• [sane-devel] UMAX Astra 2200 USB weirdness   Oliver Rauch
• [sane-devel] UMAX Astra 2200 USB weirdness   ope
• [sane-devel] Video4linux   Novak Levente
• [sane-devel] Video4linux   Henning Meier-Geinitz
• [sane-devel] Video4linux   Julien BLACHE
• [sane-devel] Video4linux   Novak Levente
• [sane-devel] Visioneer 5800   jollyprince at juno.com
• [sane-devel] Visioneer 5800   Martijn van Oosterhout
• [sane-devel] Visioneer 5800   Henning Meier-Geinitz
• [sane-devel] Visioneer 5800   Steven Ellis
• [sane-devel] Re: Visioneer 5800   jollyprince at juno.com
• [sane-devel] Re: Visioneer 5800   jollyprince at juno.com
• [sane-devel] Re: Visioneer 5800   Henning Meier-Geinitz
• [sane-devel] Visioneer 5800 backend   jollyprince at juno.com
• [sane-devel] Visioneer 5800 backend   Henning Meier-Geinitz
• [sane-devel] Well, Duh...   Jeffery C. May
• [sane-devel] What next?   jollyprince at juno.com
• [sane-devel] What next?   Henning Meier-Geinitz
• [sane-devel] What next?   Henning Meier-Geinitz
• [sane-devel] What next?   Henning Meier-Geinitz
• [sane-devel] What next?   Roger O Wales
• [sane-devel] What next?   Henning Meier-Geinitz
• [sane-devel] WinXP problem   Ken Moffat
• [sane-devel] WinXP problem   Oliver Rauch
• [sane-devel] XSane 0.90: Missing gettext produces hard to understand error-message when compiling   Gerfried Maier

Last message date: Mon Jun 30 22:24:47 BST 2003
Archived on: Sat Dec 3 12:18:17 GMT 2022

• Messages sorted by: [ thread ] [ author ] [ date ]
• More info on this list...