[sane-devel] Re: Visioneer 5800

jollyprince@juno.com jollyprince@juno.com
Mon, 30 Jun 2003 04:51:42 GMT



--- gerard klaver <gerard@gkall.hobby.nl> wrote:

On Sun, 2003-06-29 at 20:38, jollyprince@juno.com wrote:
> T:  Bus=05 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#=  2 Spd=12  MxCh= 0
> D:  Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs=  1
> P:  Vendor=04a7 ProdID=0226 Rev= 1.00
> S:  Manufacturer=Visioneer
> S:  Product=USB Scanner
> S:  SerialNumber=RTS8801C2-004
> C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=  0mA
> I:  If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=ff Driver=(none)
> E:  Ad=81(I) Atr=02(Bulk) MxPS=  64 Ivl=0ms
> E:  Ad=02(O) Atr=02(Bulk) MxPS=   8 Ivl=0ms
> E:  Ad=83(I) Atr=03(Int.) MxPS=   1 Ivl=250ms
> 
> RESULT: of cat /proc/bus/usb/devices | more
> 

Realtek chip, see www.realtec.com.tw at page scanner ic
some info is given about the chip.
-- 
----------
m.vr.gr.
Gerard Klaver

Bingo!  You may have nailed it.  Since the above serial number translates to a Realtek RTS88xx family chip, it may preclude the LM9832 of my previous Email.  I made a request to Tech Support in Taiwan for data on the Realtek chip for Visioneer 5800.  Once I get it I'm not sure what to do with it but it's a start.