[sane-devel] Timeouts with UHCI and gt68xx based scanners in sane-backends 1.0.12

Christoph Bier christoph.bier at web.de
Thu Jun 5 19:31:52 BST 2003


Henning Meier-Geinitz schrieb:
> Hi,
> 
> Some people reported kernel USB timeouts with their gt68xx based
> scanners, e.g. Plustek 1247 or Mustek BearPaw series. This seems to be
> caused by the check if the firmware is already loaded in the gt68xx
> backend. I've disabled this check for now.
> 
> If you encounter this problem, get the latest backend (at least
> 1.0-47) or an unofficial snapshot from
> http://www.meier-geinitz.de/sane/gt68xx-backend/ .

Hi,

now my scanner at home works again :-)! But
only with the scanner module. Thank you very
much for the workaround!!

Many greetings,

Christoph
-- 
Christoph Bier, Dipl.Oecotroph., Email: bier at wiz.uni-kassel.de
Universitaet Kassel, FG Oekologische Lebensmittelqualitaet und
Ernaehrungskultur \\ Postfach 12 52 \\ 37202 Witzenhausen
Tel.: +49 (0) 55 42 / 98 -17 21, Fax: -17 13




More information about the sane-devel mailing list