[sane-devel] No access to an Vobis Highscreen HS 5c scanner
dirk pankonin
growing_up@gmx.net
Wed, 12 Mar 2003 19:28:23 +0100
Hi,
I cannot use my scanner from Vobis/HighScreen featured by Linotype-Hell
signed as "HS 5c". No problem to bind in the AVA1505ae SCSI-ISA card with
modprobe. A cat /proc/scsi/scsi shows:
Host: scsi2 Channel: 00 Id: 01 Lun: 00
Vendor: LinoHelm Model: Ogfice ! ! ! ! ! Rev: V3.1
Type: Scanner ANSI SCSI revision: =
02
LinoHelm and Ogfice are the original output and are no type-writer erro=
rs!
a "sane-find-scanner" answer with:
found SCSI scanner "LinoHelm Ogfice ! ! ! ! ! V3.1" at device /dev/scann=
er
found SCSI scanner "LinoHelm Ogfice ! ! ! ! ! V3.1" at device /dev/sg4
-->I did ln -s /dev/sg4 /dev/scanner before ...
scanimage -L recognize no scanner at all
I use the SuSE 8.1 distribution and the sane 1.0.8 version from this 8.1.
I did an " export SANE_DEBUG_DLL=3D255 ; export SANE_DEBUG_UMAX=3D12 " an=
d
afterwards a scanimage -Tv, scsidev -v , cat /proc/ioports,=20
cat /proc/interrupts , rescan-scsi-bus.sh and sg_map -x
Is it maybe a good idea to change the EPROM with the EPROM firmware of UM=
AX?!?
here are the results:
-------------------------------------
linux:/etc/sane.d # scanimage -Tv|less =20
[sanei_debug] Setting debug level of dll to 255.
[dll] sane_init: SANE dll backend version 1.0.6 from=20
[dll] add_backend: adding backend `umax'
[dll] load: searching backend `umax' in `/usr/lib/sane'
[dll] load: trying to load `/usr/lib/sane/libsane-umax.so.1'
[dll] load: dlopen()ing `/usr/lib/sane/libsane-umax.so.1'
[dll] init: initializing backend `umax'
[sanei_debug] Setting debug level of umax to 12.
[umax] sane_init
[umax] This is sane-umax version 1.0 build 34
[umax] compiled with USB support for Astra 2200
[umax] (C) 1997-2002 by Oliver Rauch
[umax] EMAIL: Oliver.Rauch@rauch-domain.de
[umax] reading configure file umax.conf
[umax] option scsi-maxqueue =3D 2
[umax] option scsi-buffer-size-min =3D 65536
[umax] option scsi-buffer-size-max =3D 262144
[umax] option scan-lines =3D 100
[umax] option preview-lines =3D 20
[umax] option handle-bad-sense-error =3D 0
[umax] option execute-request-sense =3D 0
[umax] option force-preview-bit-rgb =3D 0
[umax] option calibration-full-ccd =3D 1
[umax] option calibration-width-offset =3D -99999
[umax] option calibration-bytes-pixel =3D -1
[umax] ERROR: invalid value "" for option invert-shading-data in umax.con=
f
[umax] option lamp-control-available =3D 0
[umax] option connection-type =3D 1
[umax] sanei_config_attach_matching_devices(scsi LinoHell Office)
[umax] option connection-type =3D 1
[umax] attach_scanner: /dev/scanner, connection_type 1
[umax] attach_scanner: opening scsi device /dev/scanner
[umax] attach_scanner: sanei_scsi_open_extended returned scsi buffer size=
=3D=20
16384
[umax] attach_scanner: allocating SCSI buffer[0]
[umax] init
[umax] request_scsi_maxqueue =3D 2
[umax] request_preview_lines =3D 20
[umax] request_scan_lines =3D 100
[umax] handle_bad_sense_error =3D 0
[umax] execute_request_sense =3D 0
[umax] scsi_buffer_size_min =3D 65536
[umax] scsi_buffer_size_max =3D 262144
[umax] force_preview_bit_rgb =3D 0
[umax] slow =3D -1
[umax] smear =3D -1
[umax] calibration_area =3D 1
[umax] calibration_width_offset =3D -99999
[umax] calibration_bytespp =3D -1
[umax] invert_shading_data =3D -1
[umax] lamp_control_available =3D 0
[umax] backend runs on little endian machine
[umax] variable scsi buffer size (usage of sanei_scsi_open_extended)
[umax] initialize_values
[umax] identify_scanner
[umax] do_inquiry
[umax] Found LinoHelm scanner Ogfice ! ! ! ! ! version V3.1 on device=20
/dev/scanner
[umax] ERROR: attach_scanner: scanner-identification failed
[umax] finished reading configure file
[dll] init: backend `umax' is version 1.0.34
[umax] sane_get_devices(local_only =3D 0)
scanimage: no SANE devices found
[dll] sane_exit: exiting
[dll] sane_exit: calling backend `umax's exit function
[umax] sane_exit
[dll] sane_exit: finished
-------------------------------------------------------------------------=
-----------
linux:~ # rescan-scsi-bus.sh
Host adapter 1 (BusLogic) found.
Host adapter 2 (aha152x) found.
Host adapter 0 (aic7xxx) found.
Scanning for device 1 0 6 0 ...
OLD: Host: scsi1 Channel: 00 Id: 06 Lun: 00
Vendor: IBM Model: DCAS-34330W Rev: S65A
Type: Direct-Access ANSI SCSI revision: 02
Scanning for device 2 0 1 0 ...
OLD: Host: scsi2 Channel: 00 Id: 01 Lun: 00
Vendor: LinoHelm Model: Ogfice ! ! ! ! ! Rev: V3.1
Type: Scanner ANSI SCSI revision: 02
Scanning for device 0 0 2 0 ...
OLD: Host: scsi0 Channel: 00 Id: 02 Lun: 00
Vendor: PIONEER Model: DVD-ROM DVD-305 Rev: 1.00
Type: CD-ROM ANSI SCSI revision: 02
Scanning for device 0 0 4 0 ...
OLD: Host: scsi0 Channel: 00 Id: 04 Lun: 00
Vendor: PLEXTOR Model: CD-R PX-W1210S Rev: 1.05
Type: CD-ROM ANSI SCSI revision: 02
Scanning for device 0 0 6 0 ...
OLD: Host: scsi0 Channel: 00 Id: 06 Lun: 00
Vendor: IBM Model: DPSS-318350N Rev: S96H
Type: Direct-Access ANSI SCSI revision: 03
0 new device(s) found. =20
0 device(s) removed. =20
------------------------------------------------------------------------
linux:~ # cat /proc/ioports
0000-001f : dma1
0020-003f : pic1
0040-005f : timer
0060-006f : keyboard
0070-007f : rtc
0080-008f : dma page reg
00a0-00bf : pic2
00c0-00df : dma2
00f0-00ff : fpu
02f8-02ff : serial(auto)
0340-035f : aha152x
03c0-03df : vesafb
03f8-03ff : serial(auto)
0cf8-0cff : PCI conf1
a800-a8ff : PCI device 10ec:8139
a800-a8ff : 8139too
b000-b0ff : PCI device 104b:8130
b000-b0ff : BusLogic BT-950
b400-b407 : PCI device 1102:7003
b800-b81f : PCI device 1102:0004
b800-b81f : Audigy
d000-d0ff : PCI device 9005:001f
d000-d0ff : aic7xxx
d400-d41f : PCI device 8086:7112
d400-d41f : usb-uhci
d800-d80f : PCI device 8086:7111
e400-e43f : PCI device 8086:7113
e800-e81f : PCI device 8086:7113
------------------------------------------------------------------------
linux:~ # cat /proc/interrupts
CPU0 CPU1 =20
0: 264625 297751 IO-APIC-edge timer
1: 3670 4287 IO-APIC-edge keyboard
2: 0 0 XT-PIC cascade
8: 0 2 IO-APIC-edge rtc
9: 127 193 IO-APIC-edge aha152x
12: 52322 51616 IO-APIC-edge PS/2 Mouse
16: 208380 207525 IO-APIC-level eth0, nvidia
17: 12067 7804 IO-APIC-level BusLogic BT-950
18: 449 254 IO-APIC-level Audigy
19: 33737 37585 IO-APIC-level aic7xxx, usb-uhci
NMI: 0 0=20
LOC: 562280 562041=20
ERR: 0
MIS: 0
-------------------------------------------------------------------------=
--
linux:~ # scsidev -v|less
scsidev 2.27 2002/08/07
Building device list using /proc/scsi/scsi
/etc/scsi.alias: No such file or directory
5 real SCSI devices found, 9 high level devs attached
/dev/scsi/sgh2-340c0i1l0 (sg4): LinoHelm Ogfice ! ! ! ! ! V3.1 ((null)) 0
on aha152x (2-340) "(null)":
c0i1l0 c 15-4 SCSI Generic
/dev/scsi/sdh1-b000c0i6l0p7 (sdb7): IBM DCAS-34330W S65A (F36S9261) 0
on BusLogic (1-b000) "BusLogic BT-950":
c0i6l0p7 b 8-17 SCSI Disk
/dev/scsi/sdh1-b000c0i6l0p6 (sdb6): IBM DCAS-34330W S65A (F36S9261) 0
on BusLogic (1-b000) "BusLogic BT-950":
c0i6l0p6 b 8-16 SCSI Disk
/dev/scsi/sdh1-b000c0i6l0p5 (sdb5): IBM DCAS-34330W S65A (F36S9261) 0
on BusLogic (1-b000) "BusLogic BT-950":
c0i6l0p5 b 8-15 SCSI Disk
/dev/scsi/sdh1-b000c0i6l0p2 (sdb2): IBM DCAS-34330W S65A (F36S9261) 0
5 real SCSI devices found, 9 high level devs attached
/dev/scsi/sgh2-340c0i1l0 (sg4): LinoHelm Ogfice ! ! ! ! ! V3.1 ((null)) 0
on aha152x (2-340) "(null)":
c0i1l0 c 15-4 SCSI Generic
/dev/scsi/sdh1-b000c0i6l0p7 (sdb7): IBM DCAS-34330W S65A (F36S9261) 0
on BusLogic (1-b000) "BusLogic BT-950":
c0i6l0p7 b 8-17 SCSI Disk
/dev/scsi/sdh1-b000c0i6l0p6 (sdb6): IBM DCAS-34330W S65A (F36S9261) 0
on BusLogic (1-b000) "BusLogic BT-950":
c0i6l0p6 b 8-16 SCSI Disk
/dev/scsi/sdh1-b000c0i6l0p5 (sdb5): IBM DCAS-34330W S65A (F36S9261) 0
on BusLogic (1-b000) "BusLogic BT-950":
c0i6l0p5 b 8-15 SCSI Disk
/dev/scsi/sdh1-b000c0i6l0p2 (sdb2): IBM DCAS-34330W S65A (F36S9261) 0
on BusLogic (1-b000) "BusLogic BT-950":
c0i6l0p2 b 8-12 SCSI Disk
/dev/scsi/sdh1-b000c0i6l0p1 (sdb1): IBM DCAS-34330W S65A (F36S9261) 0
on BusLogic (1-b000) "BusLogic BT-950":
c0i6l0p1 b 8-11 SCSI Disk
/dev/scsi/sdh1-b000c0i6l0 (sdb): IBM DCAS-34330W S65A (F36S9261) 0
on BusLogic (1-b000) "BusLogic BT-950":
c0i6l0 b 8-10 SCSI Disk
/dev/scsi/sgh1-b000c0i6l0 (sg3): IBM DCAS-34330W S65A (F36S9261) 0
on BusLogic (1-b000) "BusLogic BT-950":
c0i6l0 c 15-3 SCSI Generic
/dev/scsi/sdh0-d000c0i6l0p3 (sda3): IBM DPSS-318350N S96H (BY1BQ869)=20
5005076103d58735
on aic7xxx (0-d000) "Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev=20
6.2.8":
c0i6l0p3 b 8-3 SCSI Disk
/dev/scsi/sdh0-d000c0i6l0p2 (sda2): IBM DPSS-318350N S96H (BY1BQ869)=20
5005076103d58735
on aic7xxx (0-d000) "Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev=20
6.2.8":
c0i6l0p2 b 8-2 SCSI Disk
/dev/scsi/sdh0-d000c0i6l0p1 (sda1): IBM DPSS-318350N S96H (BY1BQ869)=20
5005076103d58735
on aic7xxx (0-d000) "Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev=20
6.2.8":
c0i6l0p1 b 8-1 SCSI Disk
/dev/scsi/sdh0-d000c0i6l0 (sda): IBM DPSS-318350N S96H (BY1BQ869)=20
5005076103d58735
on aic7xxx (0-d000) "Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev=20
6.2.8":
c0i6l0 b 8-0 SCSI Disk
/dev/scsi/sgh0-d000c0i6l0 (sg2): IBM DPSS-318350N S96H (BY1BQ869)=20
5005076103d58735
-------------------------------------------------------------------------=
-----------
linux:~ # sg_map -x=20
/dev/sg0 0 0 2 0 5 /dev/scd0
/dev/sg1 0 0 4 0 5 /dev/scd1
/dev/sg2 0 0 6 0 0 /dev/sda
/dev/sg3 1 0 6 0 0 /dev/sdb
/dev/sg4 2 0 1 0 6
With kind regards=20
Dirk Pankonin