[sane-devel] Mustek 2400CU Plus

[Henning Meier-Geinitz]

Hi,

On Sun, Oct 12, 2003 at 05:23:57PM -0200, shirshegsm@freemail.lt wrote:
> Oh shit. No, not everything's OK. After creating /dev/usbscanner0 scanimage finds
> my scanner, but when I try to scan, it prints:
> scanimage: open of device gt68xx:/dev/usbscanner0 failed: Error during device
> I/O
> I noticed that when I try to scan, my USB mouse doesn't respond anymore. So,
> I tried to unplug the mouse but it doesn't help. After running 'SANE_DEBUG_GT68XX=255
> scanimage > out.pnm' I get big output which is attached. I've read forums, there's
> some problems with firmwares, but you (or maybe someone else :-)) gave a link
> where should be .usb file with disabled firmware checking. There was same link
> where from I've downloaded my scanner's .usb file. Tried to download and overwrite
> it again, but it didn't work.


> [gt68xx] gt68xx_device_generic_req: command=0x70
> [gt68xx] >> 70 01 00 00 00 00 00 00 70 01 00 00 00 00 00 00 70 01 00 00 00 00 00 00 70 01 00 00 00 00 00 00 70 01 00 00 00 00 00 00 70 01 00 00 00 00 00 00 70 01 00 00 00 00 00 00 70 01 00 00 00 00 00 00

That's the known bug that happens with some gt68xx scanners and some
UHCI chipsets, see the gt68xx homepage.

You still use the version of gt68xx that comes with
sane-backendds-1.0.12. Get a snapshot from
http://www.sane-project.org/snapshots/ . That one should work.

Before trying again, unplug and replug your scanner. It may even be
necessary to unload/reload the usb-uhci and scanner modules.

Bye,
  Henning