[sane-devel] SANE, Epson backend on NetBSD
Karl Heinz Kremer
khk at khk.net
Sun Oct 5 18:41:57 BST 2003
I've moved to libusb since 1.0.9, which also means that I now use the
sanei_usb calls to
open the USB device. I don't run NetBSD, so I cannot debug this here.
What happens, if you turn on debug output with setting the
SANE_DEBUG_EPSON
environment variable to 255? Can you please send the output of
scanimage.
THanks,
Karl Heinz
On Sunday, October 5, 2003, at 01:15 PM, Michael Piotrowski wrote:
> Hi,
>
> While SANE 1.0.9 works fine on NetBSD, there problems with current
> SANE versions (1.0.12, CVS) and/or the Epson backend on NetBSD.
>
> I've got a link from /dev/uk0 to /dev/scanner, and sane-find-scanner
> finds the scanner:
>
> found SCSI processor "EPSON Perfection1640 1.04" at /dev/uk0
>
> However, scanimage -L doesn't find it, and when trying to actually
> scan it fails with:
>
> $ SANE_DEBUG_EPSON=5 scanimage -d epson:/dev/uk0 > test.pnm
> .
> .
> .
> [epson] sane_open(/dev/uk0)
> [epson] Error opening the devicescanimage: open of device
> epson:/dev/uk0 failed: Invalid argument
>
> In sane_open() there's a difference between 1.0.9 and 1.0.12: In
> 1.0.9, in the first "if (!dev)" condition in sane_open(), attach() is
> called, while in 1.0.12 SANE_STATUS_INVAL is returned immediately.
>
> If I change sane_open() to behave like in 1.0.9, it works (well, xsane
> reports the scanner as "unknown", I don't know if this is a related
> problem).
>
> Using Google I've found a message on the netbsd.help list from
> 2003-08-12 reporting the exact same problem (also with the Epson
> backend), so it seems it's not just me ;-)
>
> Any ideas on how to proceed?
>
> --
> Michael Piotrowski, M.A.
> <mxp at dynalabs.de>
> Public key at <http://www.dynalabs.de/mxp/pubkey.txt>
>
> _______________________________________________
> sane-devel mailing list
> sane-devel at lists.alioth.debian.org
> http://lists.alioth.debian.org/mailman/listinfo/sane-devel
More information about the sane-devel
mailing list