[sane-devel] scanner setup problem

tsitras@spymac.com tsitras@spymac.com
Wed, 21 Apr 2004 04:04:39 -0600 (MDT)


Hi i am trying to setup my scanner. 
It is a USB "MUSTEK 1200 UB plus". 
debian:~# sane-find-scanner

  # No SCSI scanners found. If you expected something different, make sure that
  # you have loaded a SCSI driver for your SCSI adapter.

found USB scanner (vendor=0x05d8, product=0x4002, chip=GT-6801) at libusb:002:002
  # Your USB scanner was (probably) detected. It may or may not be supported by
  # SANE. Try scanimage -L and read the backend's manpage.

  # Scanners connected to the parallel port or other proprietary ports can't be
  # detected by this program.
debian:~#

Next i do:
debian:~# cat /proc/bus/usb/devices

T:  Bus=03 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#=  1 Spd=12  MxCh= 2
B:  Alloc=  0/900 us ( 0%), #Int=  0, #Iso=  0
D:  Ver= 1.10 Cls=09(hub  ) Sub=00 Prot=00 MxPS= 8 #Cfgs=  1
P:  Vendor=0000 ProdID=0000 Rev= 2.06
S:  Manufacturer=Linux 2.6.5 uhci_hcd
S:  Product=VIA Technologies, Inc. USB (#3)
S:  SerialNumber=0000:00:10.2
C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr=  0mA
I:  If#= 0 Alt= 0 #EPs= 1 Cls=09(hub  ) Sub=00 Prot=00 Driver=hub
E:  Ad=81(I) Atr=03(Int.) MxPS=   2 Ivl=255ms

T:  Bus=03 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#=  2 Spd=12  MxCh= 0
D:  Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs=  1
P:  Vendor=046d ProdID=08b0 Rev= 0.02
S:  SerialNumber=01401900A5000000
C:* #Ifs= 3 Cfg#= 1 Atr=a0 MxPwr=500mA
I:  If#= 0 Alt= 0 #EPs= 2 Cls=0a(data ) Sub=ff Prot=00 Driver=Philips webcam
E:  Ad=82(I) Atr=03(Int.) MxPS=   1 Ivl=100ms
E:  Ad=85(I) Atr=01(Isoc) MxPS=   0 Ivl=1ms
I:  If#= 0 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=ff Prot=00 Driver=Philips webcam
E:  Ad=82(I) Atr=03(Int.) MxPS=   1 Ivl=100ms
E:  Ad=85(I) Atr=01(Isoc) MxPS= 196 Ivl=1ms
I:  If#= 0 Alt= 2 #EPs= 2 Cls=0a(data ) Sub=ff Prot=00 Driver=Philips webcam
E:  Ad=82(I) Atr=03(Int.) MxPS=   1 Ivl=100ms
E:  Ad=85(I) Atr=01(Isoc) MxPS= 292 Ivl=1ms
I:  If#= 0 Alt= 3 #EPs= 2 Cls=0a(data ) Sub=ff Prot=00 Driver=Philips webcam
E:  Ad=82(I) Atr=03(Int.) MxPS=   1 Ivl=100ms
E:  Ad=85(I) Atr=01(Isoc) MxPS= 448 Ivl=1ms
I:  If#= 0 Alt= 4 #EPs= 2 Cls=0a(data ) Sub=ff Prot=00 Driver=Philips webcam
E:  Ad=82(I) Atr=03(Int.) MxPS=   1 Ivl=100ms
E:  Ad=85(I) Atr=01(Isoc) MxPS= 592 Ivl=1ms
I:  If#= 0 Alt= 5 #EPs= 2 Cls=0a(data ) Sub=ff Prot=00 Driver=Philips webcam
E:  Ad=82(I) Atr=03(Int.) MxPS=   1 Ivl=100ms
E:  Ad=85(I) Atr=01(Isoc) MxPS= 704 Ivl=1ms
I:  If#= 0 Alt= 6 #EPs= 2 Cls=0a(data ) Sub=ff Prot=00 Driver=Philips webcam
E:  Ad=82(I) Atr=03(Int.) MxPS=   1 Ivl=100ms
E:  Ad=85(I) Atr=01(Isoc) MxPS= 776 Ivl=1ms
I:  If#= 0 Alt= 7 #EPs= 2 Cls=0a(data ) Sub=ff Prot=00 Driver=Philips webcam
E:  Ad=82(I) Atr=03(Int.) MxPS=   1 Ivl=100ms
E:  Ad=85(I) Atr=01(Isoc) MxPS= 840 Ivl=1ms
I:  If#= 0 Alt= 8 #EPs= 2 Cls=0a(data ) Sub=ff Prot=00 Driver=Philips webcam
E:  Ad=82(I) Atr=03(Int.) MxPS=   1 Ivl=100ms
E:  Ad=85(I) Atr=01(Isoc) MxPS= 896 Ivl=1ms
I:  If#= 0 Alt= 9 #EPs= 2 Cls=0a(data ) Sub=ff Prot=00 Driver=Philips webcam
E:  Ad=82(I) Atr=03(Int.) MxPS=   1 Ivl=100ms
E:  Ad=85(I) Atr=01(Isoc) MxPS= 960 Ivl=1ms
I:  If#= 0 Alt=10 #EPs= 2 Cls=0a(data ) Sub=ff Prot=00 Driver=Philips webcam
E:  Ad=82(I) Atr=03(Int.) MxPS=   1 Ivl=100ms
E:  Ad=85(I) Atr=01(Isoc) MxPS= 960 Ivl=1ms
I:  If#= 1 Alt= 0 #EPs= 0 Cls=01(audio) Sub=01 Prot=00 Driver=(none)
I:  If#= 2 Alt= 0 #EPs= 1 Cls=01(audio) Sub=02 Prot=00 Driver=(none)
E:  Ad=84(I) Atr=01(Isoc) MxPS=   0 Ivl=1ms
I:  If#= 2 Alt= 1 #EPs= 1 Cls=01(audio) Sub=02 Prot=00 Driver=(none)
E:  Ad=84(I) Atr=01(Isoc) MxPS=  90 Ivl=1ms
I:  If#= 2 Alt= 2 #EPs= 1 Cls=01(audio) Sub=02 Prot=00 Driver=(none)
E:  Ad=84(I) Atr=01(Isoc) MxPS=  46 Ivl=1ms
I:  If#= 2 Alt= 3 #EPs= 1 Cls=01(audio) Sub=02 Prot=00 Driver=(none)
E:  Ad=84(I) Atr=01(Isoc) MxPS=  25 Ivl=1ms
I:  If#= 2 Alt= 4 #EPs= 1 Cls=01(audio) Sub=02 Prot=00 Driver=(none)
E:  Ad=84(I) Atr=01(Isoc) MxPS=  16 Ivl=1ms

T:  Bus=03 Lev=01 Prnt=01 Port=01 Cnt=02 Dev#=  3 Spd=12  MxCh= 0
D:  Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
P:  Vendor=059b ProdID=0033 Rev= 2.00
S:  Manufacturer=Iomega
S:  Product=USB Zip 100
S:  SerialNumber=003347D8B68C2524
C:* #Ifs= 1 Cfg#= 1 Atr=80 MxPwr=498mA
I:  If#= 0 Alt= 0 #EPs= 3 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage
E:  Ad=01(O) Atr=02(Bulk) MxPS=  64 Ivl=0ms
E:  Ad=82(I) Atr=02(Bulk) MxPS=  64 Ivl=0ms
E:  Ad=83(I) Atr=03(Int.) MxPS=   2 Ivl=32ms

T:  Bus=02 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#=  1 Spd=12  MxCh= 2
B:  Alloc=  0/900 us ( 0%), #Int=  0, #Iso=  0
D:  Ver= 1.10 Cls=09(hub  ) Sub=00 Prot=00 MxPS= 8 #Cfgs=  1
P:  Vendor=0000 ProdID=0000 Rev= 2.06
S:  Manufacturer=Linux 2.6.5 uhci_hcd
S:  Product=VIA Technologies, Inc. USB (#2)
S:  SerialNumber=0000:00:10.1
C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr=  0mA
I:  If#= 0 Alt= 0 #EPs= 1 Cls=09(hub  ) Sub=00 Prot=00 Driver=hub
E:  Ad=81(I) Atr=03(Int.) MxPS=   2 Ivl=255ms

T:  Bus=02 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#=  2 Spd=12  MxCh= 0
D:  Ver= 1.10 Cls=ff(vend.) Sub=ff Prot=ff MxPS=64 #Cfgs=  1
P:  Vendor=05d8 ProdID=4002 Rev= 1.00
C:* #Ifs= 1 Cfg#= 1 Atr=80 MxPwr=500mA
I:  If#= 0 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
E:  Ad=81(I) Atr=02(Bulk) MxPS=  64 Ivl=0ms

T:  Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#=  1 Spd=12  MxCh= 2
B:  Alloc=  0/900 us ( 0%), #Int=  0, #Iso=  0
D:  Ver= 1.10 Cls=09(hub  ) Sub=00 Prot=00 MxPS= 8 #Cfgs=  1
P:  Vendor=0000 ProdID=0000 Rev= 2.06
S:  Manufacturer=Linux 2.6.5 uhci_hcd
S:  Product=VIA Technologies, Inc. USB
S:  SerialNumber=0000:00:10.0
C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr=  0mA
I:  If#= 0 Alt= 0 #EPs= 1 Cls=09(hub  ) Sub=00 Prot=00 Driver=hub
E:  Ad=81(I) Atr=03(Int.) MxPS=   2 Ivl=255ms
debian:~#

OK i downloaded the "sbfw.usb" file from sane's website, but now what? where do i
install that? and how? Please i need some help, as i am completely new to the
area and i need this scanner to work.








---- Msg sent via Spymac Mail - http://www.spymac.com