April 2004 Archives by date

• Messages sorted by: [ thread ] [ subject ] [ author ]
• More info on this list...

Starting: Thu Apr 1 00:21:10 BST 2004
Ending: Sat May 1 04:45:05 BST 2004
Messages: 516

• [sane-devel] xsane build problem   Enrico Weigelt
• [sane-devel] minor: libusb not recognized   Enrico Weigelt
• [sane-devel] Which scanner for doing good OCR under Linux ?   Sébastien Hinderer
• [sane-devel] Which scanner for doing good OCR under Linux ?   Felix E. Klee
• [sane-devel] minor: libusb not recognized   Julien BLACHE
• [sane-devel] Which scanner for doing good OCR under Linux ?   Sébastien Hinderer
• [sane-devel] Which scanner for doing good OCR under Linux ?   Felix E. Klee
• [sane-devel] minor: libusb not recognized   Julien BLACHE
• [sane-devel] problem in compiling on cygwin   Giuseppe Sacco
• [sane-devel] problem in compiling on cygwin   Giuseppe Sacco
• [sane-devel] minor: libusb not recognized   Enrico Weigelt
• [sane-devel] Time table for sane-backends 1.0.14   Henning Meier-Geinitz
• [sane-devel] problem in compiling on cygwin   Henning Meier-Geinitz
• [sane-devel] problem in compiling on cygwin   Giuseppe Sacco
• [sane-devel] problem in compiling on cygwin   Henning Meier-Geinitz
• [sane-devel] minor: libusb not recognized   Enrico Weigelt
• [sane-devel] Please test sane-frontends   Henning Meier-Geinitz
• [sane-devel] minor: libusb not recognized   Henning Meier-Geinitz
• [sane-devel] Time table for sane-backends 1.0.14   Henning Meier-Geinitz
• [sane-devel] problem in compiling on cygwin   Henning Meier-Geinitz
• [sane-devel] problem in compiling on cygwin   Giuseppe Sacco
• [sane-devel] problem in compiling on cygwin   Henning Meier-Geinitz
• [sane-devel] Please test sane-frontends   Henning Meier-Geinitz
• [sane-devel] minor: libusb not recognized   Henning Meier-Geinitz
• [sane-devel] Re: sane-devel digest, Vol 1 #251: HP Scanjet 7400 C   Pramathesh Ambasta
• [sane-devel] Re: sane-devel digest, Vol 1 #251: HP Scanjet 7400 C   Pramathesh Ambasta
• [sane-devel] problem in compiling on cygwin   Giuseppe Sacco
• [sane-devel] HP2300C   Mirko Melis
• [sane-devel] HP2300C   Julien TIERNY
• [sane-devel] HP2300C   Mirko Melis
• [sane-devel] problem in compiling on cygwin   Giuseppe Sacco
• [sane-devel] HP2300C   Mirko Melis
• [sane-devel] HP2300C   Matt Riechers
• [sane-devel] HP2300C   Julien TIERNY
• [sane-devel] HP2300C   Mirko Melis
• [sane-devel] HP2300C   Henning Meier-Geinitz
• [sane-devel] HP2300C   Matt Riechers
• [sane-devel] Umax S12 scanner set up   Pramathesh Ambasta
• [sane-devel] Umax S12 scanner set up   Henning Meier-Geinitz
• [sane-devel] HP2300C   Henning Meier-Geinitz
• [sane-devel] [ANN]: Support for Canon D660U added   Gerhard Jaeger
• [sane-devel] Easier-than-Xsane to use "druid" for gnome?   Brian J. Murrell
• [sane-devel] Umax S12 scanner set up   Pramathesh Ambasta
• [sane-devel] Umax S12 scanner set up   Henning Meier-Geinitz
• [sane-devel] New gt68xx backend release: Support for Plustek OpticPro U16B   Henning Meier-Geinitz
• [sane-devel] Benq 5250   Vitaly Lipatov
• [sane-devel] [ANN]: Support for Canon D660U added   Gerhard Jaeger
• [sane-devel] Easier-than-Xsane to use "druid" for gnome?   Brian J. Murrell
• [sane-devel] New gt68xx backend release: Support for Plustek OpticPro U16B   Henning Meier-Geinitz
• [sane-devel] Adding hotplug scripts to CVS   Olaf Meeuwissen
• [sane-devel] Benq 5250   Vitaly Lipatov
• [sane-devel] Adding hotplug scripts to CVS   Sergey Vlasov
• [sane-devel] Re: sane-devel digest, Vol 1 #266 - 5 msgs   Pramathesh Ambasta
• [sane-devel] Adding hotplug scripts to CVS   Olaf Meeuwissen
• [sane-devel] Adding hotplug scripts to CVS   Sergey Vlasov
• [sane-devel] Re: sane-devel digest, Vol 1 #266 - 5 msgs   Pramathesh Ambasta
• [sane-devel] problem in compiling on cygwin   Henning Meier-Geinitz
• [sane-devel] problem in compiling on cygwin   Henning Meier-Geinitz
• [sane-devel] problem in compiling on cygwin   Giuseppe Sacco
• [sane-devel] Problem with CanoScan N656U & Mac OS X 10.3.3   Onizuka
• [sane-devel] fujitsu duplex scan with usb   m. allan noah
• [sane-devel] sane-sp15c and Fujitsu 620c: Help needed for plumbing backend t   m. allan noah
• [sane-devel] Need recomendation linux/sane compat scanner w/ fast 2bit/greys   m. allan noah
• [sane-devel] Good scanner for pictures   m. allan noah
• [sane-devel] sanei_usb_read_int function   m. allan noah
• [sane-devel] Need recomendation linux/sane compat scanner w/ fast 2bit/greys   Jeff Kowalczyk
• [sane-devel] Sane and Umax Astra MX3   Marcio Pereira
• [sane-devel] Need recomendation linux/sane compat scanner w/ fast 2bit/greys   Jeff Kowalczyk
• [sane-devel] problem in compiling on cygwin   Henning Meier-Geinitz
• [sane-devel] Need recomendation linux/sane compat scanner w/ fast 2bit/greys   m. allan noah
• [sane-devel] Need recomendation linux/sane compat scanner w/ fast 2bit/greys   m. allan noah
• [sane-devel] problem in compiling on cygwin   Henning Meier-Geinitz
• [sane-devel] problem in compiling on cygwin   Giuseppe Sacco
• [sane-devel] Problem with CanoScan N656U & Mac OS X 10.3.3   Onizuka
• [sane-devel] fujitsu duplex scan with usb   m. allan noah
• [sane-devel] sane-sp15c and Fujitsu 620c: Help needed for plumbing backend t   m. allan noah
• [sane-devel] Need recomendation linux/sane compat scanner w/ fast 2bit/greys   m. allan noah
• [sane-devel] Good scanner for pictures   m. allan noah
• [sane-devel] sanei_usb_read_int function   m. allan noah
• [sane-devel] Need recomendation linux/sane compat scanner w/ fast 2bit/greys   Jeff Kowalczyk
• [sane-devel] Sane and Umax Astra MX3   Marcio Pereira
• [sane-devel] Need recomendation linux/sane compat scanner w/ fast 2bit/greys   Jeff Kowalczyk
• [sane-devel] Problem with CanoScan N656U & Mac OS X 10.3.3   Mattias Ellert
• [sane-devel] Need recomendation linux/sane compat scanner w/ fast 2bit/greys   m. allan noah
• [sane-devel] Need recomendation linux/sane compat scanner w/ fast 2bit/greys   m. allan noah
• [sane-devel] Problem with CanoScan N656U & Mac OS X 10.3.3   Onizuka
• [sane-devel] fujitsu duplex scan with usb   Oliver Schirrmeister
• [sane-devel] Problem with CanoScan N656U & Mac OS X 10.3.3   Mattias Ellert
• [sane-devel] Problem with CanoScan N656U & Mac OS X 10.3.3   Onizuka
• [sane-devel] fujitsu duplex scan with usb   m. allan noah
• [sane-devel] Problem with CanoScan N656U & Mac OS X 10.3.3   Mattias Ellert
• [sane-devel] Problem with CanoScan N656U & Mac OS X 10.3.3   Gerhard Jaeger
• [sane-devel] Problem with CanoScan N656U & Mac OS X 10.3.3   Mattias Ellert
• [sane-devel] Problem with CanoScan N656U & Mac OS X 10.3.3   Mattias Ellert
• [sane-devel] Problem with CanoScan N656U & Mac OS X 10.3.3   Onizuka
• [sane-devel] fujitsu duplex scan with usb   Oliver Schirrmeister
• [sane-devel] fujitsu duplex scan with usb   Henning Meier-Geinitz
• [sane-devel] Problem with CanoScan N656U & Mac OS X 10.3.3   Mattias Ellert
• [sane-devel] sane-find-scanner and mustek parallel port devices   Jochen Eisinger
• [sane-devel] Problem with CanoScan N656U & Mac OS X 10.3.3   Onizuka
• [sane-devel] fujitsu duplex scan with usb   m. allan noah
• [sane-devel] Problem with CanoScan N656U & Mac OS X 10.3.3   Mattias Ellert
• [sane-devel] Problem with sane, HP5200 and libusb   Stefan Seubert
• [sane-devel] Problem with CanoScan N656U & Mac OS X 10.3.3   Gerhard Jaeger
• [sane-devel] fujitsu duplex scan with usb   abel deuring
• [sane-devel] Re: sane-devel digest, Vol 1 #266 - 5 msgs   abel deuring
• [sane-devel] Problem with CanoScan N656U & Mac OS X 10.3.3   Mattias Ellert
• [sane-devel] fujitsu duplex scan with usb   Henning Meier-Geinitz
• [sane-devel] sane-find-scanner and mustek parallel port devices   Jochen Eisinger
• [sane-devel] Problem with sane, HP5200 and libusb   Stefan Seubert
• [sane-devel] fujitsu duplex scan with usb   abel deuring
• [sane-devel] Re: sane-devel digest, Vol 1 #266 - 5 msgs   abel deuring
• [sane-devel] problem in compiling on cygwin   Giuseppe Sacco
• [sane-devel] Adding hotplug scripts to CVS   Julien BLACHE
• [sane-devel] Re: sane-devel digest, Vol 1 #251: HP Scanjet 7400 C   Pramathesh Ambasta
• [sane-devel] problem in compiling on cygwin   Giuseppe Sacco
• [sane-devel] Help with usb AGFA 1212U an libusb   Jose Alberto Reguero
• [sane-devel] Adding hotplug scripts to CVS   Julien BLACHE
• [sane-devel] Re: sane-devel digest, Vol 1 #251: HP Scanjet 7400 C   Pramathesh Ambasta
• [sane-devel] Microtek ScanMaker 3800 backend: help?   Damjan Jovanovic
• [sane-devel] Benq 5250   Oliver Schwartz
• [sane-devel] Umax Astra MX3   Marcio Pereira
• [sane-devel] Help with usb AGFA 1212U an libusb   Jose Alberto Reguero
• [sane-devel] Microtek ScanMaker 3800 backend: help?   Damjan Jovanovic
• [sane-devel] Benq 5250   Oliver Schwartz
• [sane-devel] Umax Astra MX3   Marcio Pereira
• [sane-devel] Problems with xsane settings.   Erik P. Olsen
• [sane-devel] Re: sanei_usb_read_int function   Peter Mark Guevarra
• [sane-devel] Microtek ScanMaker 3800 backend: help?   Henning Meier-Geinitz
• [sane-devel] Re: sanei_usb_read_int function   Henning Meier-Geinitz
• [sane-devel] Problems with xsane settings.   Erik P. Olsen
• [sane-devel] Re: sanei_usb_read_int function   Peter Mark Guevarra
• [sane-devel] testers wanted: sanei_thread in snapscan backend   Oliver Schwartz
• [sane-devel] Help with usb AGFA 1212U an libusb   Oliver Schwartz
• [sane-devel] Microtek ScanMaker 3800 backend: help?   Henning Meier-Geinitz
• [sane-devel] Re: sanei_usb_read_int function   Henning Meier-Geinitz
• [sane-devel] testers wanted: sanei_thread in snapscan backend   Oliver Schwartz
• [sane-devel] Help with usb AGFA 1212U an libusb   Oliver Schwartz
• [sane-devel] Re: canoscan 5500F driver ?   Thibault North
• [sane-devel] Multifunctional   Pedro M. (Morphix User)
• [sane-devel] sane-frontends 1.0.12-pre1 snapshot available   Henning Meier-Geinitz
• [sane-devel] Re: canoscan 5500F driver ?   Thibault North
• [sane-devel] Multifunctional   Pedro M. (Morphix User)
• [sane-devel] sane-frontends 1.0.12-pre1 snapshot available   Henning Meier-Geinitz
• [sane-devel] EPSON PERFECTION 1670 scanner   remi.malatray
• [sane-devel] sane-find-scanner and mustek parallel port devices   Eddy De Greef
• [sane-devel] Feature freeze for sane-backend 1.0.14   Henning Meier-Geinitz
• [sane-devel] EPSON PERFECTION 1670 scanner   remi.malatray
• [sane-devel] sane-find-scanner and mustek parallel port devices   Eddy De Greef
• [sane-devel] Feature freeze for sane-backend 1.0.14   Henning Meier-Geinitz
• [sane-devel] sane-find-scanner and mustek parallel port devices   Jochen Eisinger
• [sane-devel] sane-find-scanner and mustek parallel port devices   Jochen Eisinger
• [sane-devel] hp officejet support   Fetka Mario
• [sane-devel] hp officejet support   Fetka Mario
• [sane-devel] Feature freeze for sane-backend 1.0.14   Henning Meier-Geinitz
• [sane-devel] Feature freeze for sane-backend 1.0.14   Rene Rebe
• [sane-devel] problem in compiling on cygwin   Henning Meier-Geinitz
• [sane-devel] Feature freeze for sane-backend 1.0.14   Henning Meier-Geinitz
• [sane-devel] Re: canoscan 5500F driver ?   Henning Meier-Geinitz
• [sane-devel] Re: canoscan 5500F driver ?   Henning Meier-Geinitz
• [sane-devel] Re: canoscan 5500F driver ?   Thibault North
• [sane-devel] Feature freeze for sane-backend 1.0.14   Thomas Frayne
• [sane-devel] Interested in writing a driver for...   Greg Apessos
• [sane-devel] Feature freeze for sane-backend 1.0.14   Henning Meier-Geinitz
• [sane-devel] Feature freeze for sane-backend 1.0.14   Rene Rebe
• [sane-devel] problem in compiling on cygwin   Henning Meier-Geinitz
• [sane-devel] hp officejet support   Peter Kirchgessner
• [sane-devel] Feature freeze for sane-backend 1.0.14   Henning Meier-Geinitz
• [sane-devel] Re: canoscan 5500F driver ?   Henning Meier-Geinitz
• [sane-devel] Re: canoscan 5500F driver ?   Henning Meier-Geinitz
• [sane-devel] hp officejet support   Till Kamppeter
• [sane-devel] Re: canoscan 5500F driver ?   Thibault North
• [sane-devel] Feature freeze for sane-backend 1.0.14   Thomas Frayne
• [sane-devel] Interested in writing a driver for...   Greg Apessos
• [sane-devel] hp officejet support   Peter Kirchgessner
• [sane-devel] hp officejet support   Till Kamppeter
• [sane-devel] Interested in writing a driver for...   m. allan noah
• [sane-devel] Interested in writing a driver for...   Bertrik Sikken
• [sane-devel] Interested in writing a driver for...   gerard klaver
• [sane-devel] Interested in writing a driver for...   Theodore Kilgore
• [sane-devel] Interested in writing a driver for...   m. allan noah
• [sane-devel] Interested in writing a driver for...   Bertrik Sikken
• [sane-devel] Interested in writing a driver for...   gerard klaver
• [sane-devel] Interested in writing a driver for...   Theodore Kilgore
• [sane-devel] Bearpaws 2448TA Plus scanner configuration   Sharon Lim Lee Chin
• [sane-devel] Bearpaws 2448TA Plus scanner configuration   Sharon Lim Lee Chin
• [sane-devel] Feature freeze for sane-backend 1.0.14   Henning Meier-Geinitz
• [sane-devel] Interested in writing a driver for...   gerard klaver
• [sane-devel] Feature freeze for sane-backend 1.0.14   Rene Rebe
• [sane-devel] Bearpaws 2448TA Plus scanner configuration   Henning Meier-Geinitz
• [sane-devel] Feature freeze for sane-backend 1.0.14   Henning Meier-Geinitz
• [sane-devel] Interested in writing a driver for...   gerard klaver
• [sane-devel] Feature freeze for sane-backend 1.0.14   Rene Rebe
• [sane-devel] Bearpaws 2448TA Plus scanner configuration   Henning Meier-Geinitz
• [sane-devel] Help for SANE Version for OS/2   José Alberto Nuñez Aranguren
• [sane-devel] Permission problems with Kernel 2.6.4   Christoph Bier
• [sane-devel] Interested in writing a driver for...   Greg Apessos
• [sane-devel] EPSON PERFECTION 1670 scanner   Hubert Figuiere
• [Fwd: Re: [sane-devel] Permission problems with Kernel 2.6.4]   gerard klaver
• [sane-devel] Help for SANE Version for OS/2   Franz Bakan
• [sane-devel] Permission problems with Kernel 2.6.4   Julien BLACHE
• [sane-devel] Permission problems with Kernel 2.6.4   Klaus-Peter Schrage
• [sane-devel] Bearpaws 2448TA Plus scanner configuration   Henning Meier-Geinitz
• [sane-devel] Permission problems with Kernel 2.6.4   Henning Meier-Geinitz
• [sane-devel] Permission problems with Kernel 2.6.4   Christoph Bier
• [sane-devel] Help for SANE Version for OS/2   José Alberto Nuñez Aranguren
• [sane-devel] EPSON PERFECTION 1670 scanner   Oliver Schwartz
• [sane-devel] Permission problems with Kernel 2.6.4   Christoph Bier
• [sane-devel] Permission problems with Kernel 2.6.4   Christoph Bier
• [sane-devel] Interested in writing a driver for...   Greg Apessos
• [sane-devel] EPSON PERFECTION 1670 scanner   Terry Boldt
• [sane-devel] EPSON PERFECTION 1670 scanner   Hubert Figuiere
• [Fwd: Re: [sane-devel] Permission problems with Kernel 2.6.4]   gerard klaver
• [sane-devel] Help for SANE Version for OS/2   Franz Bakan
• [sane-devel] EPSON PERFECTION 1670 scanner   remi.malatray
• [sane-devel] Permission problems with Kernel 2.6.4   Julien BLACHE
• [sane-devel] Permission problems with Kernel 2.6.4   Klaus-Peter Schrage
• [sane-devel] Bearpaws 2448TA Plus scanner configuration   Henning Meier-Geinitz
• [sane-devel] Permission problems with Kernel 2.6.4   Henning Meier-Geinitz
• [sane-devel] Permission problems with Kernel 2.6.4   Christoph Bier
• [sane-devel] EPSON PERFECTION 1670 scanner   Oliver Schwartz
• [sane-devel] Permission problems with Kernel 2.6.4   Christoph Bier
• [sane-devel] EPSON PERFECTION 1670 scanner   Terry Boldt
• [sane-devel] EPSON PERFECTION 1670 scanner   remi.malatray
• [sane-devel] Permission problems with Kernel 2.6.4   Christoph Bier
• [sane-devel] Help for SANE Version for OS/2   José Alberto Nuñez Aranguren
• [sane-devel] Bearpaws 2448TA Plus scanner configuration   Henning Meier-Geinitz
• [sane-devel] Permission problems with Kernel 2.6.4   Christoph Bier
• [sane-devel] Help for SANE Version for OS/2   Franz Bakan
• [sane-devel] Help for SANE Version for OS/2   José Alberto Nuñez Aranguren
• [sane-devel] Bearpaws 2448TA Plus scanner configuration   Henning Meier-Geinitz
• [sane-devel] Whatever happened to...   Alexis, who is a Genius
• [sane-devel] Help for SANE Version for OS/2   Franz Bakan
• [sane-devel] Whatever happened to...   Alexis, who is a Genius
• [sane-devel] HP Scanjet 2400 support for genesys backend   Julien TIERNY
• [sane-devel] [ANNOUNCE] sane-frontends 1.0.12 released   Henning Meier-Geinitz
• [sane-devel] [ANNOUNCE] Second pre-release of sane-backends 1.0.14 available   Henning Meier-Geinitz
• [sane-devel] [ANNOUNCE] Second pre-release of sane-backends 1.0.14 available   Oliver Schwartz
• [sane-devel] [ANNOUNCE] Second pre-release of sane-backends 1.0.14 available   Henning Meier-Geinitz
• [sane-devel] .configure warning in 1.0.14-pre1   Eichi Onizuka
• [sane-devel] [ANNOUNCE] Second pre-release of sane-backends 1.0.14 available   Oliver Rauch
• [sane-devel] .configure warning in 1.0.14-pre1   Henning Meier-Geinitz
• [sane-devel] HP Scanjet 2400 support for genesys backend   Julien TIERNY
• [sane-devel] [ANNOUNCE] Second pre-release of sane-backends 1.0.14 available   Henning Meier-Geinitz
• [sane-devel] [ANNOUNCE] sane-frontends 1.0.12 released   Henning Meier-Geinitz
• [sane-devel] [ANNOUNCE] Second pre-release of sane-backends 1.0.14 available   Henning Meier-Geinitz
• [sane-devel] [ANNOUNCE] Second pre-release of sane-backends 1.0.14 available   Oliver Schwartz
• [sane-devel] [ANNOUNCE] Second pre-release of sane-backends 1.0.14 available   Henning Meier-Geinitz
• [sane-devel] lamp going off on scanning pass - scans all black   John Youells
• [sane-devel] lamp going off on scanning pass - scans all black   John Youells
• [sane-devel] .configure warning in 1.0.14-pre1   Eichi Onizuka
• [sane-devel] [ANNOUNCE] Second pre-release of sane-backends 1.0.14 available   Oliver Rauch
• [sane-devel] .configure warning in 1.0.14-pre1   Eichi Onizuka
• [sane-devel] [ANNOUNCE] Second pre-release of sane-backends 1.0.14 available   Oliver Rauch
• [sane-devel] .configure warning in 1.0.14-pre1   Henning Meier-Geinitz
• [sane-devel] [ANNOUNCE] Second pre-release of sane-backends 1.0.14 available   Henning Meier-Geinitz
• [sane-devel] lamp going off on scanning pass - scans all black   John Youells
• [sane-devel] lamp going off on scanning pass - scans all black   John Youells
• [sane-devel] .configure warning in 1.0.14-pre1   Eichi Onizuka
• [sane-devel] [ANNOUNCE] Second pre-release of sane-backends 1.0.14 available   Oliver Rauch
• [sane-devel] lamp going off on scanning pass - scans all black   Henning Meier-Geinitz
• [sane-devel] .configure warning in 1.0.14-pre1   Henning Meier-Geinitz
• [sane-devel] umax backend: scanimage: setting of option --br-x failed (Invalid argument)   Rainer Lay
• [sane-devel] Microtek ScanMaker 35t+ SCSI-Problems   Hubert Krause
• [sane-devel] Microtek ScanMaker 35t+ SCSI-Problems   Markku Savela
• [sane-devel] EPSON PERFECTION 1670 scanner   remi.malatray
• [sane-devel] .configure warning in 1.0.14-pre1   Eichi Onizuka
• [sane-devel] .configure warning in 1.0.14-pre1   Peter O'Gorman
• [sane-devel] .configure warning in 1.0.14-pre1   Henning Meier-Geinitz
• [sane-devel] umax backend: scanimage: setting of option --br-x failed (Invalid argument)   Henning Meier-Geinitz
• [sane-devel] .configure warning in 1.0.14-pre1   Peter O'Gorman
• [sane-devel] .configure warning in 1.0.14-pre1   Henning Meier-Geinitz
• [sane-devel] HP Scanjet 2400 support for genesys backend   Henning Meier-Geinitz
• [sane-devel] Whatever happened to...   Henning Meier-Geinitz
• [sane-devel] lamp going off on scanning pass - scans all black   Henning Meier-Geinitz
• [sane-devel] .configure warning in 1.0.14-pre1   Henning Meier-Geinitz
• [sane-devel] umax backend: scanimage: setting of option --br-x failed (Invalid argument)   Rainer Lay
• [sane-devel] Microtek ScanMaker 35t+ SCSI-Problems   Hubert Krause
• [sane-devel] Microtek ScanMaker 35t+ SCSI-Problems   Markku Savela
• [sane-devel] EPSON PERFECTION 1670 scanner   remi.malatray
• [sane-devel] HP Scanjet 2400 support for genesys backend   Julien TIERNY
• [sane-devel] .configure warning in 1.0.14-pre1   Eichi Onizuka
• [sane-devel] .configure warning in 1.0.14-pre1   Peter O'Gorman
• [sane-devel] .configure warning in 1.0.14-pre1   Henning Meier-Geinitz
• [sane-devel] umax backend: scanimage: setting of option --br-x failed (Invalid argument)   Henning Meier-Geinitz
• [sane-devel] .configure warning in 1.0.14-pre1   Peter O'Gorman
• [sane-devel] .configure warning in 1.0.14-pre1   Henning Meier-Geinitz
• [sane-devel] HP Scanjet 2400 support for genesys backend   Henning Meier-Geinitz
• [sane-devel] Whatever happened to...   Henning Meier-Geinitz
• [sane-devel] HP Scanjet 2400 support for genesys backend   Julien TIERNY
• [sane-devel] Whatever happened to...   Steven Ellis
• [sane-devel] Whatever happened to...   Henning Meier-Geinitz
• [sane-devel] Mustek BearPaw 4800TA ProII scanner   Cosmin Pop
• [sane-devel] Microtek ScanMaker 3800 backend work-in-progress   Damjan Jovanovic
• [sane-devel] Mustek BearPaw 4800TA ProII scanner   Henning Meier-Geinitz
• [sane-devel] HP Scanjet 2400 support for genesys backend   Henning Meier-Geinitz
• [sane-devel] Microtek ScanMaker 3800 backend work-in-progress   Henning Meier-Geinitz
• [sane-devel] Whatever happened to...   Steven Ellis
• [sane-devel] Whatever happened to...   Henning Meier-Geinitz
• [sane-devel] Mustek BearPaw 4800TA ProII scanner   Cosmin Pop
• [sane-devel] Microtek ScanMaker 35t+ SCSI-Problems   Stefan Schlörholz
• [sane-devel] Microtek ScanMaker 3800 backend work-in-progress   Damjan Jovanovic
• [sane-devel] Mustek BearPaw 4800TA ProII scanner   Henning Meier-Geinitz
• [sane-devel] 2.6 and sane   Jago Pearce
• [sane-devel] 2.6 and sane   Henning Meier-Geinitz
• [sane-devel] HP Scanjet 2400 support for genesys backend   Henning Meier-Geinitz
• [sane-devel] Microtek ScanMaker 3800 backend work-in-progress   Henning Meier-Geinitz
• [sane-devel] Microtek ScanMaker 35t+ SCSI-Problems   Stefan Schlörholz
• [sane-devel] 2.6 and sane   Jago Pearce
• [sane-devel] 2.6 and sane   Henning Meier-Geinitz
• [sane-devel] Mustek BearPaw 4800TA ProII scanner   Cosmin Pop
• [sane-devel] Microtek ScanMaker 35t+ SCSI-Problems   Hubert Krause
• [sane-devel] Yet another mail about libusb and scanner ;-)   syrius.ml at no-log.org
• [sane-devel] Mustek BearPaw 4800TA ProII scanner   Cosmin Pop
• [sane-devel] Microtek ScanMaker 35t+ SCSI-Problems   Hubert Krause
• [sane-devel] Re: [linux-usb-devel] Yet another mail about libusb and scanner ;-)   Alan Stern
• [sane-devel] Re: [linux-usb-devel] Yet another mail about libusb and scanner ;-)   enine
• [sane-devel] Re: [linux-usb-devel] Yet another mail about libusb and scanner ;-)   m. allan noah
• [sane-devel] Microtek ScanMaker 35t+ SCSI-Problems   Stefan Schlörholz
• [sane-devel] sorry for the noise.   syrius.ml at no-log.org
• [sane-devel] noise again   syrius.ml at no-log.org
• [sane-devel] Re: [linux-usb-devel] Yet another mail about libusb and scanner ;-)   gerard klaver
• [sane-devel] umax backend: scanimage: setting of option --br-x failed (Invalid argument)   Rainer Lay
• [sane-devel] Re: [linux-usb-devel] Yet another mail about libusb and scanner ;-)   syrius.ml at no-log.org
• [sane-devel] Yet another mail about libusb and scanner ;-)   syrius.ml at no-log.org
• [sane-devel] Re: [linux-usb-devel] Yet another mail about libusb and scanner ;-)   Alan Stern
• [sane-devel] Re: [linux-usb-devel] Yet another mail about libusb and scanner ;-)   enine
• [sane-devel] Re: [linux-usb-devel] Yet another mail about libusb and scanner ;-)   m. allan noah
• [sane-devel] Microtek ScanMaker 35t+ SCSI-Problems   Stefan Schlörholz
• [sane-devel] sorry for the noise.   syrius.ml at no-log.org
• [sane-devel] noise again   syrius.ml at no-log.org
• [sane-devel] Re: [linux-usb-devel] Yet another mail about libusb and scanner ;-)   gerard klaver
• [sane-devel] umax backend: scanimage: setting of option --br-x failed (Invalid argument)   Rainer Lay
• [sane-devel] Re: [linux-usb-devel] Yet another mail about libusb and scanner ;-)   syrius.ml at no-log.org
• [sane-devel] scanner setup problem   tsitras at spymac.com
• [sane-devel] Help for SANE Version for OS/2   José Alberto Nuñez Aranguren
• [sane-devel] Please suggest scanner for me.   ren
• [sane-devel] Problem with scanadf using high resolutions   Flynn Marquardt
• [sane-devel] dll.c OS/2 specific patch   Franz Bakan
• [sane-devel] scanner setup problem   Henning Meier-Geinitz
• [sane-devel] scanner setup problem   tsitras at spymac.com
• [sane-devel] Mustek ScanExpress 6000 P doesn't work correctly   Julien Langer
• [sane-devel] Help for SANE Version for OS/2   José Alberto Nuñez Aranguren
• [sane-devel] Mustek ScanExpress 6000 P doesn't work correctly   Jochen Eisinger
• [sane-devel] Please suggest scanner for me.   ren
• [sane-devel] Problem with scanadf using high resolutions   Flynn Marquardt
• [sane-devel] dll.c OS/2 specific patch   Franz Bakan
• [sane-devel] scanner setup problem   Henning Meier-Geinitz
• [sane-devel] Mustek ScanExpress 6000 P doesn't work correctly   Julien Langer
• [sane-devel] Mustek ScanExpress 6000 P doesn't work correctly   Jochen Eisinger
• [sane-devel] Mustek ScanExpress 6000 P doesn't work correctly   Jochen Eisinger
• [sane-devel] EPSON PERFECTION 1670 scanner   Oliver Schwartz
• [sane-devel] SANE for embedded linux   Jeevandra S
• [sane-devel] Mustek ScanExpress 6000 P doesn't work correctly   Julien Langer
• [sane-devel] dll.c OS/2 specific patch   Henning Meier-Geinitz
• [sane-devel] Mustek ScanExpress 6000 P doesn't work correctly   Jochen Eisinger
• [sane-devel] umax backend: scanimage: setting of option --br-x failed (Invalid argument)   Henning Meier-Geinitz
• [sane-devel] Problem with scanadf using high resolutions   Henning Meier-Geinitz
• [sane-devel] SANE for embedded linux   Henning Meier-Geinitz
• [sane-devel] Mustek BearPaw 4800TA ProII scanner   Henning Meier-Geinitz
• [sane-devel] Mustek ScanExpress 6000 P doesn't work correctly   Julien Langer
• [sane-devel] dll.c OS/2 specific patch   Franz Bakan
• [sane-devel] Problem with scanadf using high resolutions   Oliver Rauch
• [sane-devel] Ep_to_piperef error   Brandon Carpenter
• [sane-devel] Mustek ScanExpress 6000 P doesn't work correctly   Jochen Eisinger
• [sane-devel] Ep_to_piperef error   Mattias Ellert
• [sane-devel] EPSON PERFECTION 1670 scanner   Oliver Schwartz
• [sane-devel] SANE for embedded linux   Jeevandra S
• [sane-devel] Mustek ScanExpress 6000 P doesn't work correctly   Julien Langer
• [sane-devel] dll.c OS/2 specific patch   Henning Meier-Geinitz
• [sane-devel] Mustek ScanExpress 6000 P doesn't work correctly   Jochen Eisinger
• [sane-devel] umax backend: scanimage: setting of option --br-x failed (Invalid argument)   Henning Meier-Geinitz
• [sane-devel] Problem with scanadf using high resolutions   Henning Meier-Geinitz
• [sane-devel] SANE for embedded linux   Henning Meier-Geinitz
• [sane-devel] Mustek BearPaw 4800TA ProII scanner   Henning Meier-Geinitz
• [sane-devel] Mustek ScanExpress 6000 P doesn't work correctly   Julien Langer
• [sane-devel] dll.c OS/2 specific patch   Franz Bakan
• [sane-devel] Problem with scanadf using high resolutions   Oliver Rauch
• [sane-devel] Ep_to_piperef error   Brandon Carpenter
• [sane-devel] Ep_to_piperef error   Mattias Ellert
• [sane-devel] SANE for embedded linux   Gerhard Jaeger
• [sane-devel] sane, 2.6 + hotplug scripts   Jago Pearce
• [sane-devel] Ep_to_piperef error   Brandon Carpenter
• [sane-devel] dll.c OS/2 specific patch   Henning Meier-Geinitz
• [sane-devel] sane, 2.6 + hotplug scripts   Oliver Schwartz
• [sane-devel] sane, 2.6 + hotplug scripts   Bertrik Sikken
• [sane-devel] umax backend: scanimage: setting of option --br-x failed (Invalid argument)   Oliver Rauch
• [sane-devel] SANE for embedded linux   Gerhard Jaeger
• [sane-devel] sane, 2.6 + hotplug scripts   Jago Pearce
• [sane-devel] Ep_to_piperef error   Brandon Carpenter
• [sane-devel] SANE Windows binary installer   cat52
• [sane-devel] dll.c OS/2 specific patch   Henning Meier-Geinitz
• [sane-devel] sane, 2.6 + hotplug scripts   Oliver Schwartz
• [sane-devel] sane, 2.6 + hotplug scripts   Bertrik Sikken
• [sane-devel] umax backend: scanimage: setting of option --br-x failed (Invalid argument)   Oliver Rauch
• [sane-devel] SANE Windows binary installer   cat52
• [sane-devel] SANE Windows binary installer   Henning Meier-Geinitz
• [sane-devel] Code freeze for sane-backends 1.0.14   Henning Meier-Geinitz
• [sane-devel] A question on epson scanners and function levels   Varol Kaptan
• [sane-devel] A question on epson scanners and function levels   Karl Heinz Kremer
• [sane-devel] SANE Windows binary installer   Henning Meier-Geinitz
• [sane-devel] Code freeze for sane-backends 1.0.14   Henning Meier-Geinitz
• [sane-devel] A question on epson scanners and function levels   Varol Kaptan
• [sane-devel] A question on epson scanners and function levels   Karl Heinz Kremer
• [sane-devel] Xsane 0.92: make fails with /bin/sh: no: command not found   Laurent-jan Dullaart
• [sane-devel] Xsane 0.92: make fails with /bin/sh: no: command not found   Henning Meier-Geinitz
• [sane-devel] Xsane 0.92: make fails with /bin/sh: no: command not found   Laurent-jan Dullaart
• [sane-devel] Xsane 0.92: make fails with /bin/sh: no: command not found   Laurent-jan Dullaart
• [sane-devel] Xsane 0.92: make fails with /bin/sh: no: command not found   Henning Meier-Geinitz
• [sane-devel] Xsane 0.92: make fails with /bin/sh: no: command not found   Laurent-jan Dullaart
• [sane-devel] [ANNOUNCE] Third pre-release of sane-backends 1.0.14 available   Henning Meier-Geinitz
• [sane-devel] Problem with scanadf using high resolutions   Flynn Marquardt
• [sane-devel] Microtek Scanmaker X6 and Lightlid35   Christoph Knauer
• [sane-devel] Canscan5000F driver project   Henning Meier-Geinitz
• [sane-devel] Microtek Scanmaker X6 and Lightlid35   Karsten Festag
• [sane-devel] Canscan5000F driver project   Thibault North
• [sane-devel] Canscan5000F driver project   Thibault North
• [sane-devel] Xsane 0.92: make fails with /bin/sh: no: command not found   Oliver Rauch
• [sane-devel] CanoScan D1250U2   Adalberto
• [sane-devel] CanoScan D1250U2   m. allan noah
• [sane-devel] [ANNOUNCE] Third pre-release of sane-backends 1.0.14 available   Henning Meier-Geinitz
• [sane-devel] Problem with scanadf using high resolutions   Flynn Marquardt
• [sane-devel] Microtek Scanmaker X6 and Lightlid35   Christoph Knauer
• [sane-devel] Canscan5000F driver project   Henning Meier-Geinitz
• [sane-devel] Microtek Scanmaker X6 and Lightlid35   Karsten Festag
• [sane-devel] lamp going off on scanning pass - scans all black - fixed !!   John Youells
• [sane-devel] Canscan5000F driver project   Thibault North
• [sane-devel] Canscan5000F driver project   Thibault North
• [sane-devel] Xsane 0.92: make fails with /bin/sh: no: command not found   Oliver Rauch
• [sane-devel] CanoScan D1250U2   Adalberto
• [sane-devel] CanoScan D1250U2   m. allan noah
• [sane-devel] upgrade to 2.6.4; sane-find-scanner: yes, scanimage: no   Adam
• [sane-devel] lamp going off on scanning pass - scans all black - fixed !!   John Youells
• [sane-devel] Allow all users access to /proc/bus/usb without hotplug?   Jago Pearce
• [sane-devel] Re: fi-4110CU   Pablo Yaggi
• [sane-devel] upgrade to 2.6.4; sane-find-scanner: yes, scanimage: no   Adam
• [sane-devel] Re: fi-4110CU   m. allan noah
• [sane-devel] Allow all users access to /proc/bus/usb without hotplug?   Henning Meier-Geinitz
• [sane-devel] Re: fi-4110CU   Henning Meier-Geinitz
• [sane-devel] upgrade to 2.6.4; sane-find-scanner: yes, scanimage: no   Henning Meier-Geinitz
• [sane-devel] Re: fi-4110CU   Pablo Yaggi
• [sane-devel] Microtek Scanmaker X6 and Lightlid35   Christoph Knauer
• [sane-devel] upgrade to 2.6.4; sane-find-scanner: yes, scanimage: no   Adam
• [sane-devel] Allow all users access to /proc/bus/usb without hotplug?   Jago Pearce
• [sane-devel] Re: fi-4110CU   Pablo Yaggi
• [sane-devel] Re: fi-4110CU   m. allan noah
• [sane-devel] Allow all users access to /proc/bus/usb without hotplug?   Henning Meier-Geinitz
• [sane-devel] Re: fi-4110CU   Henning Meier-Geinitz
• [sane-devel] upgrade to 2.6.4; sane-find-scanner: yes, scanimage: no   Henning Meier-Geinitz
• [sane-devel] Re: fi-4110CU   Pablo Yaggi
• [sane-devel] Microtek Scanmaker X6 and Lightlid35   Christoph Knauer
• [sane-devel] upgrade to 2.6.4; sane-find-scanner: yes, scanimage: no   Adam
• [sane-devel] "Well known" Colour mode strings   Matthew Duggan
• [sane-devel] "Well known" Colour mode strings   Mattias Ellert
• [sane-devel] Microtek Scanmaker X6 and Lightlid35   Karsten Festag
• [sane-devel] "Well known" Colour mode strings   Matthew Duggan
• [sane-devel] "Well known" Colour mode strings   Mattias Ellert
• [sane-devel] Microtek Scanmaker X6 and Lightlid35   Karsten Festag
• [sane-devel] Mustek ScanExpress 6000 P doesn't work correctly   Jochen Eisinger
• [sane-devel] Microtek Scanmaker X6 and Lightlid35   Christoph Knauer
• [sane-devel] Genius ColorPage-Vivid 4XE   Andre Barini
• [sane-devel] Re: fi-4110CU   m. allan noah
• [sane-devel] "Well known" Colour mode strings   Henning Meier-Geinitz
• [sane-devel] Re: fi-4110CU   Pablo Yaggi
• [sane-devel] XSane-0.93 released   Oliver Rauch
• [sane-devel] eula.txt not found   Christoph Knauer
• [sane-devel] Mustek ScanExpress 6000 P doesn't work correctly   Jochen Eisinger
• [sane-devel] Microtek Scanmaker X6 and Lightlid35   Christoph Knauer
• [sane-devel] Genius ColorPage-Vivid 4XE   Andre Barini
• [sane-devel] Re: fi-4110CU   m. allan noah
• [sane-devel] "Well known" Colour mode strings   Henning Meier-Geinitz
• [sane-devel] Re: fi-4110CU   Pablo Yaggi
• [sane-devel] XSane-0.93 released   Oliver Rauch
• [sane-devel] eula.txt not found   Christoph Knauer
• [sane-devel] eula.txt not found   Oliver Rauch
• [sane-devel] eula.txt not found   Christoph Knauer
• [sane-devel] eula.txt not found   Oliver Rauch
• [sane-devel] eula.txt not found   Christoph Knauer
• [sane-devel] Bug with ADF/Epson 1640SU in MacOSX   cat52
• [sane-devel] segmentation fault in xsane with epkowa   William P. Thompson
• [sane-devel] Genius ColorPage-Vivid 4XE   Henning Meier-Geinitz
• [sane-devel] Binary build of XSane-0.93 for OS/2 available   Franz Bakan
• [sane-devel] eula.txt not found   Oliver Rauch
• [sane-devel] eula.txt not found   Christoph Knauer
• [sane-devel] eula.txt not found   Oliver Rauch
• [sane-devel] eula.txt not found   Christoph Knauer
• [sane-devel] Bug with ADF/Epson 1640SU in MacOSX   cat52
• [sane-devel] segmentation fault in xsane with epkowa   William P. Thompson
• [sane-devel] Genius ColorPage-Vivid 4XE   Henning Meier-Geinitz
• [sane-devel] Binary build of XSane-0.93 for OS/2 available   Franz Bakan
• [sane-devel] XSane-0.93 released   Hubert Figuiere
• [sane-devel] "Well known" Colour mode strings   Matthew Duggan
• [sane-devel] Bug with ADF/Epson 1640SU in MacOSX   Klaus Dittrich
• [sane-devel] Fi-4120c duplex color   Krzysztof Cieniuch
• [sane-devel] XSane-0.93 released   Hubert Figuiere
• [sane-devel] Fi-4120c duplex color   m. allan noah
• [sane-devel] "Well known" Colour mode strings   Matthew Duggan
• [sane-devel] Fi-4120c duplex color   Krzysztof Cieniuch
• [sane-devel] Fi-4120c duplex color   Oliver Schirrmeister
• [sane-devel] Fi-4120c duplex color   Oliver Schirrmeister
• [sane-devel] Bug with ADF/Epson 1640SU in MacOSX   Klaus Dittrich
• [sane-devel] Fi-4120c duplex color   Krzysztof Cieniuch
• [sane-devel] Re: fi-4110CU   Henning Meier-Geinitz
• [sane-devel] "Well known" Colour mode strings   Henning Meier-Geinitz
• [sane-devel] XSane-0.93 released   Henning Meier-Geinitz
• [sane-devel] test results for epson with sane-backends-1.0.14-pre3   Klaus Dittrich
• [sane-devel] Fi-4120c duplex color   Krzysztof Cieniuch
• [sane-devel] Fi-4120c duplex color   m. allan noah
• [sane-devel] Fi-4120c duplex color   Krzysztof Cieniuch
• [sane-devel] Fi-4120c duplex color   Oliver Schirrmeister
• [sane-devel] Fi-4120c duplex color   Oliver Schirrmeister
• [sane-devel] Fi-4120c duplex color   Krzysztof Cieniuch
• [sane-devel] Re: fi-4110CU   Henning Meier-Geinitz
• [sane-devel] "Well known" Colour mode strings   Henning Meier-Geinitz
• [sane-devel] XSane-0.93 released   Henning Meier-Geinitz
• [sane-devel] test results for epson with sane-backends-1.0.14-pre3   Klaus Dittrich

Last message date: Sat May 1 04:45:05 BST 2004
Archived on: Sat Dec 3 12:18:20 GMT 2022

• Messages sorted by: [ thread ] [ subject ] [ author ]
• More info on this list...