[sane-devel] Re: fi-4110CU
Pablo Yaggi
pyaggi@aulamagna.com.ar
Wed, 28 Apr 2004 15:22:08 -0300
=2D----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
Hi, here is the output you asked, this is my conf file for the fujitsu back=
end
in case it helps:
=2D -----------------fujitsu.conf
# To search for all FUJITSU scsi devices
scsi FUJITSU
# To use a specific scsi device
#/dev/sg1
# For Fujitsu scanners connected via USB on a known device (kernel driver):
#usb /dev/usb/scanner0
usb 0x04c5 0x1033
# For Fujitsu scanners connected via USB using vendor and device ids (libus=
b):
#usb 0x04c5 0x1042
#usb 0x04c5 0x1041
# To force the Fujitsu backend to treat all devices it finds as a certain=20
type:
#option force-model fi-4340Cdi
=2D ---------------
searching for SCSI scanners:
checking /dev/scanner... failed to open (Invalid argument)
checking /dev/sg0... failed to open (Invalid argument)
checking /dev/sg1... failed to open (Invalid argument)
checking /dev/sg2... failed to open (Invalid argument)
checking /dev/sg3... failed to open (Invalid argument)
checking /dev/sg4... failed to open (Invalid argument)
checking /dev/sg5... failed to open (Invalid argument)
checking /dev/sg6... failed to open (Invalid argument)
checking /dev/sg7... failed to open (Invalid argument)
checking /dev/sg8... failed to open (Invalid argument)
checking /dev/sg9... failed to open (Invalid argument)
checking /dev/sga... failed to open (Invalid argument)
checking /dev/sgb... failed to open (Invalid argument)
checking /dev/sgc... failed to open (Invalid argument)
checking /dev/sgd... failed to open (Invalid argument)
checking /dev/sge... failed to open (Invalid argument)
checking /dev/sgf... failed to open (Invalid argument)
checking /dev/sgg... failed to open (Invalid argument)
checking /dev/sgh... failed to open (Invalid argument)
checking /dev/sgi... failed to open (Invalid argument)
checking /dev/sgj... failed to open (Invalid argument)
checking /dev/sgk... failed to open (Invalid argument)
checking /dev/sgl... failed to open (Invalid argument)
checking /dev/sgm... failed to open (Invalid argument)
checking /dev/sgn... failed to open (Invalid argument)
checking /dev/sgo... failed to open (Invalid argument)
checking /dev/sgp... failed to open (Invalid argument)
checking /dev/sgq... failed to open (Invalid argument)
checking /dev/sgr... failed to open (Invalid argument)
checking /dev/sgs... failed to open (Invalid argument)
checking /dev/sgt... failed to open (Invalid argument)
checking /dev/sgu... failed to open (Invalid argument)
checking /dev/sgv... failed to open (Invalid argument)
checking /dev/sgw... failed to open (Invalid argument)
checking /dev/sgx... failed to open (Invalid argument)
checking /dev/sgy... failed to open (Invalid argument)
checking /dev/sgz... failed to open (Invalid argument)
# No SCSI scanners found. If you expected something different, make sure=
=20
that
# you have loaded a SCSI driver for your SCSI adapter.
searching for USB scanners:
checking /dev/usb/scanner... failed to open (Invalid argument)
checking /dev/usb/scanner0... failed to open (Invalid argument)
checking /dev/usb/scanner1... failed to open (Invalid argument)
checking /dev/usb/scanner2... failed to open (Invalid argument)
checking /dev/usb/scanner3... failed to open (Invalid argument)
checking /dev/usb/scanner4... failed to open (Invalid argument)
checking /dev/usb/scanner5... failed to open (Invalid argument)
checking /dev/usb/scanner5... failed to open (Invalid argument)
checking /dev/usb/scanner7... failed to open (Invalid argument)
checking /dev/usb/scanner8... failed to open (Invalid argument)
checking /dev/usb/scanner9... failed to open (Invalid argument)
checking /dev/usb/scanner10... failed to open (Invalid argument)
checking /dev/usb/scanner11... failed to open (Invalid argument)
checking /dev/usb/scanner12... failed to open (Invalid argument)
checking /dev/usb/scanner13... failed to open (Invalid argument)
checking /dev/usb/scanner14... failed to open (Invalid argument)
checking /dev/usb/scanner15... failed to open (Invalid argument)
checking /dev/usbscanner... failed to open (Invalid argument)
checking /dev/usbscanner0... failed to open (Invalid argument)
checking /dev/usbscanner1... failed to open (Invalid argument)
checking /dev/usbscanner2... failed to open (Invalid argument)
checking /dev/usbscanner3... failed to open (Invalid argument)
checking /dev/usbscanner4... failed to open (Invalid argument)
checking /dev/usbscanner5... failed to open (Invalid argument)
checking /dev/usbscanner6... failed to open (Invalid argument)
checking /dev/usbscanner7... failed to open (Invalid argument)
checking /dev/usbscanner8... failed to open (Invalid argument)
checking /dev/usbscanner9... failed to open (Invalid argument)
checking /dev/usbscanner10... failed to open (Invalid argument)
checking /dev/usbscanner11... failed to open (Invalid argument)
checking /dev/usbscanner12... failed to open (Invalid argument)
checking /dev/usbscanner13... failed to open (Invalid argument)
checking /dev/usbscanner14... failed to open (Invalid argument)
checking /dev/usbscanner15... failed to open (Invalid argument)
trying libusb:
<device descriptor of 0x0000/0x0000 at 002:001 (Linux 2.6.3-7mdkenterprise=
=20
uhci_hcd UHCI Host Controller)>
bLength 18
bDescriptorType 1
bcdUSB 1.10
bDeviceClass 9
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 8
idVendor 0x0000
idProduct 0x0000
bcdDevice 2.06
iManufacturer 3 (Linux 2.6.3-7mdkenterprise uhci_hcd)
iProduct 2 (UHCI Host Controller)
iSerialNumber 1 (0000:00:07.3)
bNumConfigurations 1
<configuration 0>
bLength 9
bDescriptorType 2
wTotalLength 25
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0 ()
bmAttributes 64 (Self-powered)
MaxPower 0 mA
<interface 0>
<altsetting 0>
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 9
bInterfaceSubClass 0
bInterfaceProtocol 0
iInterface 0 ()
<endpoint 0>
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 (in 0x01)
bmAttributes 3 (interrupt)
wMaxPacketSize 2
bInterval 255 ms
bRefresh 0
bSynchAddress 0
<device descriptor of 0x04c5/0x1033 at 001:004>
bLength 18
bDescriptorType 1
bcdUSB 1.10
bDeviceClass 0
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 8
idVendor 0x04C5
idProduct 0x1033
bcdDevice 1.00
iManufacturer 0 ()
iProduct 0 ()
iSerialNumber 0 ()
bNumConfigurations 1
<configuration 0>
bLength 9
bDescriptorType 2
wTotalLength 32
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0 ()
bmAttributes 96 (Self-poweredRemote Wakeup)
MaxPower 2 mA
<interface 0>
<altsetting 0>
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 2
bInterfaceClass 255
bInterfaceSubClass 255
bInterfaceProtocol 255
iInterface 0 ()
<endpoint 0>
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 (in 0x01)
bmAttributes 2 (bulk)
wMaxPacketSize 64
bInterval 0 ms
bRefresh 0
bSynchAddress 0
<endpoint 1>
bLength 7
bDescriptorType 5
bEndpointAddress 0x02 (out 0x02)
bmAttributes 2 (bulk)
wMaxPacketSize 64
bInterval 0 ms
bRefresh 0
bSynchAddress 0
<trying to find out which USB chip is used>
checking for GT-6801 ...
this is not a GT-6801 (bDeviceClass =3D 0)
checking for GT-6816 ...
Couldn't send write control message (Broken pipe)
checking for MA-1017 ...
this is not a MA-1017 (bDeviceClass =3D 0, bInterfaceClass =3D 255)
checking for MA-1015 ...
this is not a MA-1015 (bDeviceClass =3D 0)
checking for MA-1509 ...
this is not a MA-1509 (bDeviceClass =3D 0)
checking for LM983[1,2,3] ...
this is not a LM983x (bNumEndpoints =3D 2)
checking for GL646 ...
this is not a GL646 (bDeviceClass =3D 0, bInterfaceClass =3D 255)
checking for GL660+GL646 ...
this is not a GL660+GL646 (bDeviceClass =3D 0, bInterfaceClass =3D 255)
<Couldn't determine the type of the USB chip>
found USB scanner (vendor=3D0x04c5, product=3D0x1033) at libusb:001:004
<device descriptor of 0x0443/0x002e at 001:003 (NMB Gateway USB Hub Keyboar=
d)>
bLength 18
bDescriptorType 1
bcdUSB 1.10
bDeviceClass 0
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 8
idVendor 0x0443
idProduct 0x002E
bcdDevice 1.00
iManufacturer 1 (NMB)
iProduct 2 (Gateway USB Hub Keyboard)
iSerialNumber 0 ()
bNumConfigurations 1
<configuration 0>
bLength 9
bDescriptorType 2
wTotalLength 59
bNumInterfaces 2
bConfigurationValue 1
iConfiguration 2 (Gateway USB Hub Keyboard)
bmAttributes 224 (Self-poweredRemote Wakeup)
MaxPower 0 mA
<interface 0>
<altsetting 0>
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 3
bInterfaceSubClass 1
bInterfaceProtocol 1
iInterface 2 (Gateway USB Hub Keyboard)
<endpoint 0>
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 (in 0x01)
bmAttributes 3 (interrupt)
wMaxPacketSize 8
bInterval 24 ms
bRefresh 0
bSynchAddress 0
<interface 1>
<altsetting 0>
bLength 9
bDescriptorType 4
bInterfaceNumber 1
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 3
bInterfaceSubClass 0
bInterfaceProtocol 0
iInterface 2 (Gateway USB Hub Keyboard)
<endpoint 0>
bLength 7
bDescriptorType 5
bEndpointAddress 0x82 (in 0x02)
bmAttributes 3 (interrupt)
wMaxPacketSize 4
bInterval 48 ms
bRefresh 0
bSynchAddress 0
<device descriptor of 0x0443/0x002f at 001:002 (NMB Gateway USB Hub Keyboar=
d)>
bLength 18
bDescriptorType 1
bcdUSB 1.10
bDeviceClass 9
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 8
idVendor 0x0443
idProduct 0x002F
bcdDevice 1.00
iManufacturer 1 (NMB)
iProduct 2 (Gateway USB Hub Keyboard)
iSerialNumber 0 ()
bNumConfigurations 1
<configuration 0>
bLength 9
bDescriptorType 2
wTotalLength 25
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 2 (Gateway USB Hub Keyboard)
bmAttributes 160 (Remote Wakeup)
MaxPower 90 mA
<interface 0>
<altsetting 0>
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 9
bInterfaceSubClass 0
bInterfaceProtocol 0
iInterface 2 (Gateway USB Hub Keyboard)
<endpoint 0>
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 (in 0x01)
bmAttributes 3 (interrupt)
wMaxPacketSize 1
bInterval 255 ms
bRefresh 0
bSynchAddress 0
<device descriptor of 0x0000/0x0000 at 001:001 (Linux 2.6.3-7mdkenterprise=
=20
uhci_hcd UHCI Host Controller)>
bLength 18
bDescriptorType 1
bcdUSB 1.10
bDeviceClass 9
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 8
idVendor 0x0000
idProduct 0x0000
bcdDevice 2.06
iManufacturer 3 (Linux 2.6.3-7mdkenterprise uhci_hcd)
iProduct 2 (UHCI Host Controller)
iSerialNumber 1 (0000:00:07.2)
bNumConfigurations 1
<configuration 0>
bLength 9
bDescriptorType 2
wTotalLength 25
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0 ()
bmAttributes 64 (Self-powered)
MaxPower 0 mA
<interface 0>
<altsetting 0>
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 9
bInterfaceSubClass 0
bInterfaceProtocol 0
iInterface 0 ()
<endpoint 0>
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 (in 0x01)
bmAttributes 3 (interrupt)
wMaxPacketSize 2
bInterval 255 ms
bRefresh 0
bSynchAddress 0
# Your USB scanner was (probably) detected. It may or may not be supporte=
d=20
by
# SANE. Try scanimage -L and read the backend's manpage.
# Scanners connected to the parallel port or other proprietary ports can'=
t=20
be
# detected by this program.
done
On Tuesday 27 April 2004 02:23 pm, Henning Meier-Geinitz wrote:
> Hi,
>
> On Tue, Apr 27, 2004 at 10:59:51AM -0300, Pablo Yaggi wrote:
> > > > I saw you're one of the mayor contributors to the fujitsu
> > > > sane-backend, i had one fi-4110CU that's not supported but maybe you
> > > > can help me or i can help you to add it to the backend, this is the
> > > > product/vendor as sane-find-scanner said:
> > > >
> > > > found USB scanner (vendor=3D0x04c5, product=3D0x1033, chip=3DGT-681=
6?) at
> > > > libusb:001:007
>
> Please make sure that the scanner module is not loaded (rmmod scanner),
> run "sane-find-scanner -v -v" as root, and send us the output.
>
> > > > I sent a mail to fujitsu to try to get the chipset info (I could
> > > > open it if you want) and the protocol, but they still didn't answer.
> > > >
> > > > Maybe the scanner is not much diferent from other, is there anyway
> > > > to checkit ? point me and i'll do it (i can code if it is required)
>
> If the scanner really uses a GT-6816 chip, it can be supported by the
> gt68xx backend. In this case please have a look at the documentation on
> http://www.meier-geinitz.de/sane/gt68xx-backend/
> and http://www.meier-geinitz.de/sane/gt68xx-backend/adding.html
>
> The latter page is not finished yet.
>
> Good luck!
>
> Bye,
> Henning
=2D----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.2.4 (GNU/Linux)
iD8DBQFAj/ZpGPVnf3kOUAwRAk5HAJ42sVgeKFE9KQbYDqYRZX2Vt2z4vgCfYs2L
AGqPdZ3KQpwV7RO0dys6PtI=3D
=3Dc5AP
=2D----END PGP SIGNATURE-----