[sane-devel] Bug with ADF/Epson 1640SU in MacOSX

[Klaus Dittrich]

cat52 wrote:

> I tested the sane-backends-1.0.14-pre3 in MacOSX 10.3.3 using the ADF 
> with an Epson 1640SU Office, fails with a timeout after feed():
>
>> $ scanimage -x 128 -y 128 --source 'Automatic Document Feeder' > ccc.pbm
>> [sanei_debug] Setting debug level of sanei_usb to 255.
>> usb_set_debug: Setting debugging level to 255 (on)
>> usb_os_find_busses: Found 001
>> usb_os_find_busses: Found 002
>> usb_os_find_busses: Found 003
>
>
> [...cut...]
>
>> read/write completed: no error, size=42
>> [sanei_usb] 0000: 01 C0 40 6A 00 AF 00 00 00 00 00 00 00 00 00 00 
>> ..@j............
>> [sanei_usb] 0010: 00 00 00 00 00 00 00 00 00 00 50 65 72 66 65 63 
>> ..........Perfec
>> [sanei_usb] 0020: 74 69 6F 6E 31 36 34 30 20 20                   
>> tion1640  ......
>> [sanei_usb] sanei_usb_read_bulk: wanted 42 bytes, got 42 bytes
>> [epson] receive buf, expected = 42, got = 42
>> [epson] feed()
>> [epson] send buf, size = 1
>> [sanei_usb] sanei_usb_write_bulk: trying to write 1 bytes
>> [sanei_usb] 0000: 19                                              
>> ................
>> usb_bulk_write: ep addr = 0x02
>> Converting ep address to pipeRef.
>> ep_to_pipeRef: Pipe 1: DIR: 1 number: 1
>> ep_to_pipeRef: Pipe 2: DIR: 0 number: 2
>> ep_to_pipeRef: pipeRef for ep address 0x02 found: 0x02
>> usb_bulk_write: endpoint=0x02 size=1 timeout=30000 ms
>> read/write completed: no error, size=1
>> [sanei_usb] sanei_usb_write_bulk: wanted 1 bytes, wrote 1 bytes
>> [sanei_usb] sanei_usb_read_bulk: trying to read 1 bytes
>> usb_bulk_read: ep addr = 0x81
>> Converting ep address to pipeRef.
>> ep_to_pipeRef: Pipe 1: DIR: 1 number: 1
>> ep_to_pipeRef: pipeRef for ep address 0x81 found: 0x01
>> usb_bulk_read: endpoint=0x81 size=1 timeout=30000 ms
>> read/write completed: transaction timed out, size=0
>> USB error: usb_bulk_read: error reading from endpoint 81
>> [sanei_usb] sanei_usb_read_bulk: read failed: No such file or directory
>> Converting ep address to pipeRef.
>> ep_to_pipeRef: Pipe 1: DIR: 1 number: 1
>> ep_to_pipeRef: pipeRef for ep address 0x81 found: 0x01
>> [epson] receive buf, expected = 1, got = 0
>> [epson] close_scanner(fd = 0)
>> [sanei_usb] sanei_usb_close: closing device 0
>> usb_os_close: 04b8:010a
>> [epson] close_scanner(fd = -1)
>> scanimage: sane_start: Error during device I/O
>
>
> This bug was in sane-backends-10.3.0 and remains in this pre3 version.
> I am also using libusb-0.1.8-macosx (patched) from 
> http://www.ellert.se/twain-sane/.
>
> Javier Diaz-Reinoso
> Web: http://homepage.mac.com/javier_diaz_r/
>
>
It worked with sane-backends-1.0.12, a patch from sane-backends-1.0.13 
and scsi
uo to kernel-2.6.5. I tried (sane-backends-1.0.12)  2.6.6-rc3 today  now 
even scsi does
not work anymore.
--
Klaus