[sane-devel] Relatively no-brainer installation instructions: SANE/Epson 2400

[Steven P. Ulrick]

Hello, Everyone :)
I am running Fedora Core 2.  After trying all of the (similar)
installation instructions that I found in various places, I still get
the following when I run /sbin/modprobe scanner vendor=0x04b8
product0x011b

FATAL: Module scanner not found.

I have the following in /etc/modprobe.conf:
options scanner vendor=0x04b8 product=0x011b

The following is located in my EHCI host controller:
EPSON Scanner

Manufacturer: EPSON


Class
255
(Vendor Specific Class)
Subclass
0
Protocol
0
USB Version
2.0

Vendor ID
0x4b8
(Seiko Epson Corp.)
Product ID
0x11b
(Perfection 2400 Photo)
Revision
1.0

Speed
480 Mbit/s
Channels
0
Max. Packet Size
0


I have edited /etc/sane.d/dll.conf apppropriately, as well as
/etc/sane.d/epson.conf

scanimage -L says that no scanners were found, but sane-find-scanner
says:
ound USB scanner (vendor=0x04b8 [EPSON], product=0x011b [EPSON Scanner])
at libusb:001:004

If anyone has any ideas, or no-brainer instructions, let me know :)

Steven P. Ulrick