[sane-devel] HP3400c device busy

Luigi Belli lbelli@crema.unimi.it
Mon, 23 Feb 2004 17:04:24 +0100

Hello to everyone, this is my first post here.
Lurking this mailing list I found a thread back in November about a problem=
with hp3400c and libusb, and I have exactly the same problem :)
However, I can add some informations to better specify that problem.
I have an Asus A7M266 motherboard with the infamous via686b southbridge and=
I'm using the uhci-hcd usb kernel driver.
The 2.4 scanner kernel module worked perfectly, but both libusb and 2.6=20
scanner module (definitively removed from 2.6.3) says that the device is=20
If unplug and replug the device and immediately access the scanner with any=
frontend it works correctly; same behaviour if I just restart hotplug.=20
Sometimes the device remains accessible for some minutes, sometimes for few=
seconds, sometimes for more than one access, sometimes only for the first=20
These are the outputs of lspci and lsusb:

inferos root # lspci
0000:00:00.0 Host bridge: Advanced Micro Devices [AMD] AMD-760 [IGD4-1P]=20
System Controller (rev 13)
0000:00:01.0 PCI bridge: Advanced Micro Devices [AMD] AMD-760 [IGD4-1P] AGP=
0000:00:04.0 ISA bridge: VIA Technologies, Inc. VT82C686 [Apollo Super Sout=
(rev 40)
0000:00:04.1 IDE interface: VIA Technologies, Inc.=20
VT82C586A/B/VT82C686/A/B/VT8233/A/C/VT8235 PIPC Bus Master IDE (rev 06)
0000:00:04.2 USB Controller: VIA Technologies, Inc. USB (rev 16)
0000:00:04.3 USB Controller: VIA Technologies, Inc. USB (rev 16)
0000:00:04.4 Non-VGA unclassified device: VIA Technologies, Inc. VT82C686=20
[Apollo Super ACPI] (rev 40)
0000:00:09.0 Ethernet controller: Realtek Semiconductor Co., Ltd.=20
RTL-8139/8139C/8139C+ (rev 10)
0000:00:0a.0 Multimedia audio controller: Creative Labs SB Live! EMU10k1 (r=
0000:00:0a.1 Input device controller: Creative Labs SB Live! MIDI/Game Port=
(rev 07)
0000:01:05.0 VGA compatible controller: nVidia Corporation NV11 [GeForce2=20
MX/MX 400] (rev b2)
inferos root # lsusb
Bus 002 Device 003: ID 03f0:0405 Hewlett-Packard ScanJet 3400cse
Bus 002 Device 001: ID 0000:0000
Bus 001 Device 002: ID 046d:c00e Logitech, Inc. Optical Mouse
Bus 001 Device 001: ID 0000:0000

Hope that someone understands what's happening...


"It is not enough to succeed.=A0=A0Others=A0must=A0fail."
Linux Registered User #301571, running Gentoo
Memeber of Luganega - Linux User Group Crema (IT)