[sane-devel] Re: scanner not recognised part II
Paul Frisson
paulfrisson at skynet.be
Sun Feb 29 13:04:42 GMT 2004
No file neither directory names /dev/scanner (but there are /dev/scanner0 and
scanner1 ... in /dev/usb)
The cat /proc/scsi/scsi command provided the answer :
Attached devices:
Host: scsi0 Channel: 00 Id: 00 Lun: 00
Vendor: PLEXTOR Model: CD-R PX-W1210A Rev: 1.10
Type: CD-ROM ANSI SCSI revision: 02
Strange enough because there is no other scsi device on my PC than the scanner
(SCSI ID = 6), the plextor writer exists but is IDE.
I disabled all the lines in dll.conf but I still am unable to scan, even as
root, the same and everlasting "no device avalilable" when I start sane or
Xsane.
I don't know if this is important but anytime I start Xsane, he asks me for
agreement on licence before checking, as far as I remember, this question
used to appear only the first time sane was launched, so is it possible that
he fails to find/make his configuration file ?
Le Dimanche 29 Février 2004 12:53, Karl Heinz Kremer a écrit :
> If you have a file named /dev/scanner, please remove it.
> Do you have any other SCSI devices? Please run this command with your
> scanner
> attached and turned on:
> cat /proc/scsi/scsi
>
> Edit the file dll.conf and disable all other entries but the one for
> the scanners
> you have (in a first step, you could disable everything but the line
> containing
> "epson". Does this make a difference?
Le Dimanche 29 Février 2004 12:53, Karl Heinz Kremer a écrit :
> If you have a file named /dev/scanner, please remove it.
> Do you have any other SCSI devices? Please run this command with your
> scanner
> attached and turned on:
> cat /proc/scsi/scsi
>
> Edit the file dll.conf and disable all other entries but the one for
> the scanners
> you have (in a first step, you could disable everything but the line
> containing
> "epson". Does this make a difference?
More information about the sane-devel
mailing list