[sane-devel] Cannot set up an EPSON Perfection 2400 PHOTO

Karl Heinz Kremer khk@khk.net
Fri, 9 Jan 2004 19:49:14 -0500

To permanently disable the kernel scanner driver, you probably have to
modify the hotplug configuration so that the module is no longer
automatically loaded. One crude way of doing this is to rename
the scanner.o file.

Karl Heinz

On Jan 9, 2004, at 7:31 PM, Olaf Meeuwissen wrote:

> Lincoln Peters <sampln@sbcglobal.net> writes:
>> On Thu, 2004-01-08 at 22:09, Olaf Meeuwissen wrote:
>>>> # scanimage -L
>>>> device `epson:/dev/usb/scanner0' is a Epson GT-9300 flatbed scanner
>>>> I know that my scanner is NOT an Epson GT-9300!
>>> You may know that, but your scanner doesn't ;-)
>>> The problem is that EPSON decided to market the same scanner under a
>>> different name abroad (here is Japan it's a GT-9300), but didn't
>>> bother to change the name returned by the scanner.  The epson (and
>>> epkowa) backend(s) use the name returned by the scanner, not what is
>>> printed on the label (for rather obvious reasons).
>> That is reassuring.  However, having made one (low-res) scan,
>> "scanimage" now fails to detect the scanner.  I don't know what I 
>> might
>> have done to cause it to stop working.
> Neither do I, but you might try replugging the scanner and making sure
> that the kernel hasn't loaded the scanner module (which forces the use
> of libusb).
> Check with '/sbin/lsmod | grep scanner'.  You can use 'rmmod scanner'
> to remove the module.
> Hope this helps,
> -- 
> Olaf Meeuwissen                            EPSON KOWA Corporation, ECS
> GnuPG key: 6BE37D90/AB6B 0D1F 99E7 1BF5 EB97  976A 16C7 F27D 6BE3 7D90
> Penguin's lib!       -- I hack, therefore I am --               LPIC-2
> -- 
> sane-devel mailing list: sane-devel@lists.alioth.debian.org
> http://lists.alioth.debian.org/mailman/listinfo/sane-devel
> Unsubscribe: Send mail with subject "unsubscribe your_password"
>              to sane-devel-request@lists.alioth.debian.org