[sane-devel] Sane and HP C6270A 3828
17 Mar 2004 10:32:48 -0500
I have a HP scanner C6270A rev 3828. Here's the output of
Host: scsi0 Channel: 00 Id: 00 Lun: 00
Vendor: HL-DT-ST Model: CD-RW GCE-8481B Rev: 1.10
Type: CD-ROM ANSI SCSI revision: 02
Host: scsi1 Channel: 00 Id: 03 Lun: 00
Vendor: HP Model: C6270A Rev: 3828
Type: Processor ANSI SCSI revision: 02
Host: scsi1 Channel: 00 Id: 05 Lun: 00
Vendor: IOMEGA Model: ZIP 100 Rev: J.03
Type: Direct-Access ANSI SCSI revision: 02
sane-find-scanner finds it:
found SCSI processor "HP C6270A 3828" at /dev/scanner
found SCSI processor "HP C6270A 3828" at /dev/sg1
found SCSI processor "HP C6270A 3828" at /dev/sgb
# Your SCSI scanner was detected. It may or may not be supported by SANE. Try
# scanimage -L and read the backend's manpage.
But scanimage -L doesn't detect it!
[ko@localhost scsi]# scanimage -L
No scanners were identified. If you were expecting something different,
check that the scanner is plugged in, turned on and detected by the
sane-find-scanner tool (if appropriate). Please read the documentation
which came with this software (README, FAQ, manpages).
Here's the /etc/sane.d/hp.conf:
and the hp driver appears in /etc/sane.d/dll.conf
[ko@localhost scsi]# grep hp /etc/sane.d/dll.conf
# HP OfficeJet backend homepage: http://hpoj.sf.net/
# Uncomment the following line if hpoj is installed:
Could anyone give some hints as what's wrong?
Engineering & Computer Science
Tel: (514) 848-2424 x5879