[sane-devel] FreeBSD 5.2 open device failed

[ATT]

The scanner is detected well by sane but it fails to open the device as you
see below.

[umax] sane_init
[umax] This is sane-umax version 1.0 build 40
[umax] compiled with USB support for Astra 2200
[umax] (C) 1997-2002 by Oliver Rauch
[umax] EMAIL: Oliver.Rauch at rauch-domain.de
[umax] reading configure file umax.conf
[umax] option scsi-maxqueue = 2
[umax] option scsi-buffer-size-min = 65536
[umax] option scsi-buffer-size-max = 131072
[umax] option scan-lines = 100
[umax] option preview-lines = 20
[umax] option handle-bad-sense-error = 0
[umax] option execute-request-sense = 0
[umax] option slow-speed = -1
[umax] option calibration-full-ccd = -1
[umax] option lamp-control-available = 0
[umax] option connection-type = 1
[umax] attach_scanner: SCSI UMAX Astra 1200S V2.9, connection_type 1
[umax] attach_scanner: opening scsi device SCSI UMAX Astra 1200S V2.9
[umax] ERROR: attach_scanner: opening scsi device SCSI UMAX Astra 1200S V2.9
failed
[umax] sanei_config_attach_matching_devices(scsi UMAX Astra 1200S V2.9)
[umax] sanei_config_attach_matching_devices(scsi UMAX * Scanner)
[umax] attach_scanner: /dev/pass0, connection_type 1
[umax] attach_scanner: opening scsi device /dev/pass0
[umax] ERROR: attach_scanner: opening scsi device /dev/pass0 failed

I use the default 5.2 kernel. The scanner ist he only SCSI device.

The scanner works fine on my windows laptop.  

Any idea anyone?

Regards,

Frank