[sane-devel] scanimage/saned segfault

m. allan noah anoah at pfeiffer.edu
Mon Aug 8 19:32:03 UTC 2005

scott, not enough data from the debug logs there. with both the endianness 
and alignment issues of gcc on the slug, it could be a host of things. can 
you try doing some differences in color depth and resolution, and see if 
it is truly size based, or rather data size based.

can you verify that your setup works with an x86 linux box in place of the 

can you try openslug?

nslu2-linux moderator, and sane backend maintainer.

On Mon, 8 Aug 2005, Scott Hazen Mueller wrote:

> I'm playing with network scanning.  I have a Linksys NSLU2 running Unslung
> (the opened-up firmware) acting as the scanner server (for an Epson Perfection
> 1670, backend is snapscan) scanner.  Local scanning works fine at 8.5x11
> (large debug output):
> http://zorac.sf-bay.org/~scott/scanimage-local-8.5x11.txt
> Network scanning works fine at a size of 6x4 (more debug output):
> http://zorac.sf-bay.org/~scott/saned-6x4.txt
> http://zorac.sf-bay.org/~scott/scanimage-net-6x4.txt
> However, when I try a network scan at 8.5x11, scanimage dies with a broken
> pipe and saned segfaults (yet more debug output):
> http://zorac.sf-bay.org/~scott/saned-8.5x11.txt
> http://zorac.sf-bay.org/~scott/scanimage-net-8.5x11.txt
> Thoughts?

"so don't tell us it can't be done, putting down what you don't know.
money isn't our god, integrity will free our souls" - Max Cavalera

More information about the sane-devel mailing list